Colorimetric ELISA based on glucose oxidase-regulated the color of acid–base indicator for sensitive detection of aflatoxin B1 in corn samples

Intermediate data fusion improves the accuracy of near-infrared spectroscopy and Raman spectroscopy for the detection of aflatoxin B1 in peanuts

This study developed a convolutional neural network (CNN) model based on feature-level data fusion for quantitatively detecting aflatoxin B1 (AFB1) in peanuts. Using a portable near-infrared (NIR) spectrometer and a Raman spectrometer, NIR and Raman spectra were collected from peanut samples with varying levels of fungal contamination. The spectral data were then enhanced and preprocessed, and individual CNN models were constructed for each type of spectrum. Building on the single-spectrum models, data-level and feature-level fusion of the NIR and Raman spectra were performed, and corresponding CNN models were developed for the quantitative detection of AFB1 in peanuts. Experimental results demonstrated that the CNN models with data fusion significantly improved detection performance and generalization ability compared to single-spectrum CNN models, particularly those using feature-level fusion. The feature-level fusion CNN model yielded the best performance, with a root mean square error of prediction of 19.7787 μg·kg-1, a prediction correlation coefficient of 0.9836 for test set 1 (containing augmented spectra), and 0.9890 for test set 2 (containing only raw spectra), with a relative prediction deviation of 7.6506. Overall, this study demonstrated the superiority of data fusion and the feasibility of applying CNNs in spectral detection, providing a reference for quantitatively detecting mycotoxins.

A disposable microfluidic aptasensor for one-step and real-time detection of sub-femtomolar-level aflatoxin B1 in food

Aflatoxin B1 (AFB1) is a highly toxic substance found in food, necessitating rapid and sensitive detection methods. Combining interfacial capacitive sensing with AC electrothermal (ACET) enrichment, an aptasensor based on a PCB electrode array is developed for real-time detection of trace AFB1. Owing to the sensitive solid-liquid capacitance with a pF-level resolution, AFB1 detection at sub-femtomolar level is achieved. The induced ACET flows enrich AFB1 molecules towards the electrode surface during capacitance measurement, enabling a one-step detection containing target enrichment, with an overall time of 20 s without any extra concentrating devices or processes. This sensor has a low detection limit of 620 aM, a selectivity of 2262:1 against interferences, and a wide semi-log linear range from 1 fM to 10 pM. It is with a cost below 1 US dollar for disposable detection and a convenient operation for on-site application. The detection of AFB1 in three types of quality control samples demonstrates a good feasibility for food safety inspection.

Naked-eye sensitive detection of nanoPET by pH-responsive colorimetric method based on dual-enzyme catalysis

A pH-responsive colorimetric method based on dual-enzyme catalysis for rapid and facile detection and quantification of nanoPET at environment-dependent concentration is proposed. The nanoPET was hydrolyzed by the synergistic catalysis of cutinase and lipase to terephthalic acid which can be sensitive detected using bromocresol purple as the indicator. The color changed from purple to bright yellow as the nanoPET detection concentration increased from 0 mg/mL to 2 mg/mL which can be detected by UV-Vis. This naked-eye method has a high sensitivity for nanoPET detection with the visual detection cutoff of 31.00 μg/mL, and has a good linearity in the range of 0 ∼ 1 mg/mL with LOD of 22.84 μg/mL. The reliability of this method is verified in the detection of nanoPET in lake water and beer samples, with an average recovery of 87.1 %. The as-developed dual-enzyme colorimetric chemosensor holds promising potential as a robust and effective platform for the sensitive detection of nanoPET.

Computer vision-assisted smartphone microscope imaging digital immunosensor based on click chemistry-mediated microsphere counting technology for the detection of aflatoxin B1 in peanuts

Aflatoxin B1 is a carcinogenic contaminant in food or feed, and it poses a serious health risk to humans. Herein, a computer vision-assisted smartphone microscope imaging digital (SMID) immunosensor based on the click chemistry-mediated microsphere counting technology was designed for the detection of aflatoxin B1 in peanuts. In this SMID immunosensor, the modified polystyrene (PS) microspheres were used as the signal probes and were recorded by a smartphone microscopic imaging system after immunoreaction and click chemistry reaction. The number of PS probes is adjusted by aflatoxin B1. The customized computer vision procedure was used to efficiently identify and count the obtained PS probes. This SMID immunosensor enables sensitive detection of aflatoxin B1 with a linear range from 0.001 ng/mL to 500 ng/mL, providing a simple, sensitive, and portable tool for food safety supervision.

Aflatoxin detection technologies: recent advances and future prospects

Aflatoxins have posed serious threat to food safety and human health. Therefore, it is important to detect aflatoxins in samples rapidly and accurately. In this review, various technologies to detect aflatoxins in food are discussed, including conventional ones such as thin-layer chromatography (TLC), high performance liquid chromatography (HPLC), enzyme linked immunosorbent assay (ELISA), colloidal gold immunochromatographic assay (GICA), radioimmunoassay (RIA), fluorescence spectroscopy (FS), as well as emerging ones (e.g., biosensors, molecular imprinting technology, surface plasmon resonance). Critical challenges of these technologies include high cost, complex processing procedures and long processing time, low stability, low repeatability, low accuracy, poor portability, and so on. Critical discussion is provided on the trade-off relationship between detection speed and detection accuracy, as well as the application scenario and sustainability of different technologies. Especially, the prospect of combining different technologies is discussed. Future research is necessary to develop more convenient, more accurate, faster, and cost-effective technologies to detect aflatoxins.

High-performance electrochemiluminescence sensors based on ultra-stable perovskite quantum dots@ZIF-8 composites for aflatoxin B1 monitoring in corn samples

Aflatoxin B1 (AFB1) that is prone to contaminate corns brings a serious threat to human health. Therefore, it is of great significance to construct novel detection methods for AFB1 tracing. Here, methylamine perovskite quantum dots (MP QDs) encapsulated by ZIF-8 metal-organic frameworks (MP QDs@ZIF-8) were prepared and then ultra-stable electrochemiluminescence (ECL) sensors were developed. By the confinement of cavities structure, multiple MP QDs were crystallized and embedded inside ZIF-8 to form MP QDs@ZIF-8, achieving stable and robust ECL responds in aqueous environment. Further combined with AFB1-imprinted polymer, the constructed ECL sensor showed good selectivity and ultra-sensitivity (the detection limit was 3.5 fg/mL, S/N = 3) with a wide linear range from 11.55 fg/mL to 20 ng/mL for AFB1 quantification. Satisfactory recoveries in corn samples indicated the reliable practicability of the proposed sensor for AFB1 assay. This work provided a novel pathway in designing high-performance ECL sensing platform for food safety.

Mycotoxins in food and feed: toxicity, preventive challenges, and advanced detection techniques for associated diseases

Mycotoxins are produced primarily as secondary fungal metabolites. Mycotoxins are toxic in nature and naturally produced by various species of fungi, which usually contaminate food and feed ingredients. The growth of these harmful fungi depends on several environmental factors, such as pH, humidity, and temperature; therefore, the mycotoxin distribution also varies among global geographical areas. Various rules and regulations regarding mycotoxins are imposed by the government bodies of each country, which are responsible for addressing global food and health security concerns. Despite this legislation, the incidence of mycotoxin contamination is continuously increasing. In this review, we discuss the geographical regulatory guidelines and recommendations that are implemented around the world to control mycotoxin contamination of food and feed products. Researchers and inventors from various parts of the world have reported several innovations for controlling mycotoxin-associated health consequences. Unfortunately, most of these techniques are restricted to laboratory scales and cannot reach users. Consequently, to date, no single device has been commercialized that can detect all mycotoxins that are naturally available in the environment. Therefore, in this study, we describe severe health hazards that are associated with mycotoxin exposure, their molecular signaling pathways and processes of toxicity, and their genotoxic and cytotoxic effects toward humans and animals. We also discuss recent developments in the construction of a sensitive and specific device that effectively implements mycotoxin identification and detection methods. In addition, our study comprehensively examines the recent advancements in the field for mitigating the health consequences and links them with the molecular and signaling pathways that are activated upon mycotoxin exposure.

A novel colorimetric biosensor for sensitive detection of aflatoxin mediated by bacterial enzymatic reaction in saffron samples

Aflatoxin is regarded as the potent carcinogenic agent which is secreted from fungi and present in some food products. So far, many detection methods have been developed to determine the trace amounts of aflatoxin in foods. In the present study a colorimetric competitive assay for detection of aflatoxin B1 (AFB1) has been developed based on interaction of gelatin functionalized gold nanoparticles (AuNPs@gelatin) in specific enzymatic reaction. Bacterial supernatant containing gelatinase enzyme were used as the substrate that could digest the coated gelatin on the surface of AuNPs and following in the presence of NaCl medium ingredient resulted to color change of AuNPs colloidal solution from red to purple. It was observed that with addition of aflatoxin to the bacterial supernatant, aflatoxin could interfere in aggregation of AuNPs and inhibited the process which subsequently prevent the expected color change induced by AuNPs aggregation. The supernatant containing AuNPs were investigated to analyze their induced surface plasmon resonance spectra through UV-visible spectroscopy. The absorption values were directly proportional with the applied AFB1 concentration. The experiment conditions including incubation time, AuNPs concentration and pH were investigated. The obtained results showed that through this approach we could detect the AFB1 in a linear range from 10 to 140 pg ml^-1, with detection limit of 4 pg ml^-1. Real sample assay in saffron samples showed recoveries percentage of 92.4%-95.3%. The applied approach proposed simple, cost effective and specific method for detection of AFB1 toxin in food samples.

Recent Achievements in Electrochemical and Surface Plasmon Resonance Aptasensors for Mycotoxins Detection

Mycotoxins are secondary metabolites of fungi that contaminate agriculture products. Their release in the environment can cause severe damage to human health. Aptasensors are compact analytical devices that are intended for the fast and reliable detection of various species able to specifically interact with aptamers attached to the transducer surface. In this review, assembly of electrochemical and surface plasmon resonance (SPR) aptasensors are considered with emphasis on the mechanism of signal generation. Moreover, the properties of mycotoxins and the aptamers selected for their recognition are briefly considered. The analytical performance of biosensors developed within last three years makes it possible to determine mycotoxin residues in water and agriculture/food products on the levels below their maximal admissible concentrations. Requirements for the development of sample treatment and future trends in aptasensors are also discussed.

Recent Advances in Conventional Methods and Electrochemical Aptasensors for Mycotoxin Detection

The presence of mycotoxins in foodstuffs and feedstuffs is a serious concern for human health. The detection of mycotoxins is therefore necessary as a preventive action to avoid the harmful contamination of foodstuffs and animal feed. In comparison with the considerable expense of treating contaminated foodstuffs, early detection is a cost-effective way to ensure food safety. The high affinity of bio-recognition molecules to mycotoxins has led to the development of affinity columns for sample pre-treatment and the development of biosensors for the quantitative analysis of mycotoxins. Aptamers are a very attractive class of biological receptors that are currently in great demand for the development of new biosensors. In this review, the improvement in the materials and methodology, and the working principles and performance of both conventional and recently developed methods are discussed. The key features and applications of the fundamental recognition elements, such as antibodies and aptamers are addressed. Recent advances in aptasensors that are based on different electrochemical (EC) transducers are reviewed in detail, especially from the perspective of the diagnostic mechanism; in addition, a brief introduction of some commercially available mycotoxin detection kits is provided.

Recent progress in visual methods for aflatoxin detection

Aflatoxins (AFs) contamination in food and agricultural products poses a significant threat to human health. Sensitive and accurate detection of AFs provides a strong guarantee for ensuring food safety. Conventional chromatographic-based or mass spectrum methods, which rely on bulky instrument and skilled personnel, are not suitable for on-site surveillance. By contrast, visual detections which possess the merits of rapidity and sophisticated instrument-free present an excellent potential for the on-site detection of AFs. This review intends to summarize the latest development of visual methods for AFs detection, including paper-based tests, chromogenic reactions, and luminescent methods. Emerging technologies, like nanotechnology, DNAzymes, and aptamers combined with these visual methods are introduced. The basic principles, features, and application advantages of each type of visual methods are discussed. The biggest challenges and perspectives on their future trends are also addressed.

Advances in Colorimetric Strategies for Mycotoxins Detection: Toward Rapid Industrial Monitoring

Mycotoxins contamination is a global public health concern. Therefore, highly sensitive and selective techniques are needed for their on-site monitoring. Several approaches are conceivable for mycotoxins analysis, among which colorimetric methods are the most attractive for commercialization purposes thanks to their visual read-out, easy operation, cost-effectiveness, and rapid response. This review covers the latest achievements in the last five years for the development of colorimetric methods specific to mycotoxins analysis, with a particular emphasis on their potential for large-scale applications in food industries. Gathering all types of (bio)receptors, main colorimetric methods are critically discussed, including enzyme-linked assays, lateral flow-assays, microfluidic devices, and homogenous in-solution strategies. This special focus on colorimetry as a versatile transduction method for mycotoxins analysis is comprehensively reviewed for the first time.

Aggregation-Induced Electrochemiluminescence Immunosensor Based on 9,10-Diphenylanthracene Cubic Nanoparticles for Ultrasensitive Detection of Aflatoxin B1

9,10-Diphenylanthracene cubic nanoparticles (DPA CNPs) with aggregation-induced emission characteristic (AIEgens) were synthesized through a facile reprecipitation method; then, a bright and stable electrochemiluminescence (ECL) signal can be observed when the DPA CNPs were modified at the glassy carbon electrode (GCE) in the presence of Tri-n-propylamine (TPA). This phenomenon is ascribed to the molecules with restricted movement that greatly blocked the energy leakage during the relaxation of the excited state, which facilitated the emission of energy in the form of photons. In addition, the size confinement effect of DPA CNPs in the aggregated state effectively enhanced the ECL emission. The application of DPA CNPs with AIE characteristics in an electrochemiluminescence immunosensor has not been reported. In this contribution, a free-label aggregation-induced electrochemiluminescence immunosensor based on DPA CNPs was fabricated and a simple strategy for ultrasensitive detection of aflatoxin B₁ (AFB₁) was proposed. The ECL signal is quenched linearly in the range of 0.01 pg/mL to 100 ng/mL for AFB₁, and the detection limit is 3 fg/mL. In summary, the prepared sensor exhibits high sensitivity, acceptable accuracy, good anti-interference ability and stability, and satisfactory detection toward AFB₁ in walnut samples. Therefore, the fabricated immunosensor will have significant applications in the fields of food, medicine, and so on.

Glucose oxidase-induced colorimetric immunoassay for qualitative detection of danofloxacin based on iron (Ⅱ) chelation reaction with phenanthroline

In this study, we developed a competitive colorimetric immunoassay for qualitative detection of DAN based on oxidation of iron (Ⅱ) (Fe²⁺) in the presence of glucose oxidase (GOx) and color change induced by Fe²⁺-phenanthroline (Phen) chromogenic system. Streptavidin (SA) acted as a linker between biotinylated anti-DAN-monoantibody (bio-mAb) and biotinylated GOx (bio-GOx) to form the immunocomplexes bio-mAb-SA-bio-GOx. In the absence of DAN, the immunocomplexes bio-mAb-SA-bio-GOx combining with coated DAN-ovalbumin (DAN-OVA) will be immobilized and catalyze glucose to produce H₂O₂. Fe²⁺ is oxidized to Fe³⁺ by H₂O₂, giving rise to a colorless result. In the presence of DAN, Fe²⁺ produces a chelation reaction with Phen, leading to orange-red color. Under optimal conditions, the detection limit (LOD) by naked eyes was 2.5 ng mL^-1 in milk, chicken, beef, and pork samples. Low LOD, no matrix effect, and no signal reader requirement make it possibly applied to quickly screen DAN on site.

Direct competitive ELISA enhanced by dynamic light scattering for the ultrasensitive detection of aflatoxin B1 in corn samples

Compared with absorbance, scattering-based dynamic light scattering (DLS) signal has higher sensitivity because its light-scattering intensity is very sensitive to changes in size, thereby enhancing the sensitivity. Herein, we first developed a DLS-enhanced direct competitive enzyme-linked immunosorbent assay (DLS-dcELISA) for ultrasensitive detection of aflatoxin B₁ (AFB₁) in corn. By using hydroxyl radical-induced gold nanoparticle (AuNP) aggregation to amplify AuNP scattering signals, the developed DLS-dcELISA exhibited ultrahigh sensitivity for AFB₁. The detection limit was 0.12 pg mL^-1, which was 153- and 385-fold lower than those obtained using plasmonic and colorimetric dcELISA. In addition, the DLS-dcELISA exhibited excellent selectivity, high accuracy, and strong practicality. Overall, this work presented a simple and universal strategy for improving the sensitivity of traditional ELISA platform only by using the sensitive DLS signals. This technique can replace absorbance-based plasmonic or colored signals as immunoassay signal output for enhanced competitive detection of mycotoxins.

A nanozyme-linked immunosorbent assay based on metal-organic frameworks (MOFs) for sensitive detection of aflatoxin B1

In order to avoid the occurrence of false positives and false negatives caused by conventional enzyme-linked immunosorbent assay (ELISA), we established a novel indirect competitive MOF-linked immunosorbent assay (MOFLISA) method for the high throughput and high sensitive detection of aflatoxin B₁. This method replaces the natural enzyme with functional MOFs to catalyze a chromogenic system. As a result, the limit of detection (LOD) of the MOFLISA method was 0.009 ng·mL^-1 with a linear working range from 0.01 to 20 ng·mL^-1. The developed MOFLISA method for AFB₁ has a 20-fold improved LOD value compared with the conventional ELISA. The recoveries and relative standard deviations (RSD) ranged from 86.41 to 99.74% and 2.38-9.04%, respectively. The results demonstrate that the recovery rate and accuracy of this detection method is better than that of conventional ELISA, reducing risks offalsepositive andfalsenegativeresults.

Sensitive electrochemical detection of aflatoxin B1 using DNA tetrahedron-nanostructure as substrate of antibody ordered assembly and template of aniline polymerization

A novel strategy for AFB1 detection in grains was proposed based on DNA tetrahedron-structured probe (DTP) and horseradish peroxidase (HRP) triggered polyaniline (PANI) deposition. Briefly, the DNA tetrahedron nanostructures were assembled on the gold electrode, with carboxylic group designed on top vertex of them. The carboxylic group was conjugated with the AFB1 monoclonal antibody (mAb) to form DTP. The test sample and a known fixed concentration of HRP-labeled AFB1 were mixed and they compete for binding to DTP. The HRP assembled on the gold electrode catalyzed the polymerization of aniline on DTP. AFB1 in grains could be determined by using PANI as electrochemical signal molecules. Interestingly, DNA tetrahedron-structure, which has mechanical rigidity and structural stability, can improve antigen-antibody specific recognition and binding efficiency through the use of mAb ordered assembly. Meanwhile, nucleic acid backbone with a large amount of negative charge is good template for aniline polymerization under mild conditions.

FRET-based sensor for visualizing pH variation with colorimetric/ratiometric strategy and application for bioimaging in living cells, bacteria and zebrafish

Acid–base balance plays a key role in regulating biological processes, and the cells must stabilize the pH within a certain range, and pH instability will cause a series of diseases.

A Gold Growth-Based Plasmonic ELISA for the Sensitive Detection of Fumonisin B1 in Maize

In this paper, a highly sensitive plasmonic enzyme-linked immunosorbent assay (pELISA) was developed for the naked-eye detection of fumonisin B₁ (FB₁). Glucose oxidase (GOx) was used as an alternative to horseradish peroxidase as the carrier of the competing antigen. GOx catalyzed the oxidation of glucose to produce hydrogen peroxide, which acted as a reducing agent to reduce Au³⁺ to Au on the surface of gold seeds (5 nm), This reaction led to a color change in the solution from colorless to purple, which was observable to the naked eye. Various parameters that could influence the detection performance of pELISA were investigated. The developed method exhibited a considerably high sensitivity for FB₁ qualitative naked-eye detection, with a visible cut-off limit of 1.25 ng/mL. Moreover, the proposed pELISA showed a good linear range of 0.31–10 ng/mL with a half maximal inhibitory concentration (IC₅₀) of 1.86 ng/mL, which was approximately 13-fold lower than that of a horseradish peroxidase- (HRP)-based conventional ELISA. Meanwhile, the proposed method was highly specific and accurate. In summary, the new pELISA exhibited acceptable accuracy and precision for sensitive naked-eye detection of FB₁ in maize samples and can be applied for the detection of other chemical contaminants.

Quantum bead-based fluorescence-linked immunosorbent assay for ultrasensitive detection of aflatoxin M1 in pasteurized milk, yogurt, and milk powder

Herein, we reported a novel direct competitive fluorescence-linked immunosorbent assay (dcFLISA) for the ultrasensitive detection of aflatoxin M₁ (AFM₁) in pasteurized milk, yogurt, and milk powder using 150-nm quantum dot beads (QB) as the carrier of competing antigen. Large QB were applied to decrease the binding affinity of the competing antigen to antibody and enhance the fluorescent signal intensity. The aflatoxin B₁ molecule was used as the surrogate of AFM₁ to label with BSA on the surface of QB because of its 63% cross reaction to anti-AFM₁ mAb. The binding affinity of the competing antigen to mAb was tuned by changing the labeled molar ratios of aflatoxin B₁ to BSA. Through combining the advantages of QB as the carrier of the competing antigen, including low binding affinity to mAb and highly fluorescent signal output, the proposed dcFLISA exhibited an ultrahigh sensitivity for AFM₁ detection, with a half-maximal inhibitory concentration of 3.15 pg/mL in 0.01 M phosphate-buffered saline solution (pH 7.4), which is substantially lower than that of the traditional horseradish peroxidase-based ELISA. The proposed method also exhibited very low detection limitations of 0.5, 0.6, and 0.72 pg/mL for real pasteurized milk, yogurt, and milk powder, respectively. These values are considerably below the maximum permissible level of the European Commission standard for AFM₁ in dairy products. In summary, the proposed dcFLISA offers a novel strategy with an ultrahigh sensitivity for the routine monitoring of AFM₁ in various dairy products.

Nanomaterials-Based Colorimetric Immunoassays

Colorimetric immunoassays for tumor marker detection have attracted considerable attention due to their simplicity and high efficiency. With the achievements of nanotechnology and nanoscience, nanomaterials-based colorimetric immunoassays have been demonstrated to be promising alternatives to conventional colorimetric enzyme-linked immunoassays. This review is focused on the progress in colorimetric immunoassays with the signal amplification of nanomaterials, including nanomaterials-based artificial enzymes to catalyze the chromogenic reactions, analyte-induced aggregation or size/morphology change of nanomaterials, nanomaterials as the carriers for loading enzyme labels, and chromogenic reactions induced by the constituent elements released from nanomaterials.

Binding-Induced DNA Dissociation Assay for Small Molecules: Sensing Aflatoxin B1

We describe a new fluorescence turn-on sensor for homogeneous detection of aflatoxin B1 (AFB1), a potent low molecular weight mycotoxin. A key innovation is the binding-induced intramolecular interaction involving the following two sets of probes: (1) a gold nanoparticle (AuNP) immobilized with hundreds of assistant oligonucleotides (AO) and dozens of anti-AFB1 monoclonal antibodies, and (2) the AFB1-BSA (BSA = bovine serum albumin) antigen conjugated with fluorophore-labeled signal oligonucleotides (SO) that contained a short sequence complementary to AO. Specific binding of AFB1-BSA to the antibody brought the fluorophore very close to the surface of the AuNP through a stable intramolecular hybridization between AO and SO, resulting in efficient quenching of fluorescence. The improved fluorescence quenching substantially reduced the background, due to the binding-induced intramolecular hybridization, and improved the signal-to-background ratio by 390%. In the presence of AFB1 in a sample, competitive binding of AFB1 in the sample to the antibodies immobilized on the AuNP caused the release of the fluorophore-labeled AFB1-BSA from the AuNP, turning on fluorescence. A detection limit of 2.3 nM was achieved, which meets the requirement for AFB1 detection at regulatory levels. Analyses of rice samples using this assay showed recoveries of 86-102%. Incorporating appropriate antibody probes could extend the assay to the detection of other small molecules.

Cytometric Microbead Magnetic Suspension Array for High-Throughput Ultrasensitive Detection of Aflatoxin B1

High-throughput and low-cost detection of mycotoxins in complex matrices is becoming increasingly urgent but it is still challenging to perform ultrasensitive analyses. Here we report a green and practical cytometric microbead magnetic suspension array (CBMSA) strategy for rapid and economical detection of aflatoxin B₁ (AFB₁) in multiple batches of lotus seed samples. The protocol included (1) fabrication of suspension array chips by immobilizing biotin-modified bovine serum albumin-AFB₁ (antigen) onto the surface of streptavidin-coated magnetic microbeads in a multiwell array, (2) indirect immunocompetition of antigen and target of AFB₁ in lotus seed samples with the specific antibodies, (3) rapid magnetic separation regardless of complex pretreatment steps, and (4) ultrasensitive fluorescence detection of fluorescein isothiocyanate-labeled goat anti-mouse immunoglobulin G (FITC-IgG) probes. After systematic optimization of some crucial parameters, the developed CBMSA assay allowed for ultrasensitive detection of AFB₁ with limit of detection as low as 7.8125 pg·kg^-1. For high-throughput analysis, the CBMSA technique was capable of on-site co-instantaneous detection of 50-100 samples in one operation within 30 s, only needing a small amount (50 μL) of solution, which is much cheaper, greener, and more user-friendly than conventional techniques. Moreover, CBMSA with magnetic separation is free of multiple centrifugation and cleanup steps to avoid unpredictable loss of targets. Since various capture and fluorescent probes can be randomly constructed and bound onto the surface of magnetic microbeads to establish an ultrasensitive detection system, the CBMSA technique is very promising for more trace analytes in complex matrices and for broad point-of-need applications, such as drug screening and real-time high-throughput analysis.

Fluorescence immunoassay based on the enzyme cleaving ss-DNA to regulate the synthesis of histone-ds-poly(AT) templated copper nanoparticles

Herein, for the first time we report a novel competitive fluorescence immunoassay for the ultrasensitive detection of aflatoxin B1 (AFB1) using histone-ds-poly(AT) templated copper nanoparticles (His-pAT CuNPs) as the fluorescent indicator. In this immunoassay, glucose oxidase (Gox) was used as the carrier of the competing antigen to catalyze the formation of hydrogen peroxide (H2O2) from glucose. H2O2 was converted to a hydroxyl radical using Fenton's reagent, which further regulated the fluorescence signals of His-pAT CuNPs. Owing to the ultrahigh sensitivity of the ss-DNA to the hydroxyl radical, the proposed fluorescence immunoassay exhibited a favorable dynamic linear detection of AFB1 ranging from 0.46 pg mL-1 to 400 pg mL-1 with an good half maximal inhibitory concentration and limit of detection of 6.13 and 0.15 pg mL-1, respectively. The intra- and inter-assay showed that the average recoveries for AFB1 spiked corn samples ranged from 96.87% to 100.73% and 96.67% to 114.92%, respectively. The reliability of this method was further confirmed by adopting ultra-performance liquid chromatography coupled with the fluorescence detector method. In summary, this work offers a novel screening strategy with high sensitivity and robustness for the quantitative detection of mycotoxins or other pollutants for food safety and clinical diagnosis.

Dual-mode fluorescent and colorimetric immunoassay for the ultrasensitive detection of alpha-fetoprotein in serum samples

We present a novel dual-mode fluorescent and colorimetric immunosensor based on conventional immunoassay platforms by utilizing a gold nanoflower (AuNF)-loaded fluorescein molecule (AuNF@Fluorescein) as signal output. The AuNFs were modified with thiolated carboxyl ligand, which consisted of a hydrophobic alkane chain as hydrophobic wallet for fluorescein encapsulation, a tetra (ethylene glycol) unit for biocompatibility and solubility, and a functional carboxyl group for the conjugation of biorecognition molecules for biosensing. The resultant AuNFs showed a high loading capacity of 3.74 × 10⁶ fluorescein molecules per AuNF because of its flower-like shape with many complex branches. By adjusting the solution pH to 8.0, the fluorescein molecules can almost entirely be released from the hydrophobic wallet of AuNF@Fluorescein, which led to strong fluorescent-signal amplification. Under the optimal detection conditions, the proposed immunoassay based on fluorescent signal exhibited ultrahigh sensitivity for alpha-fetoprotein (AFP) detection, with a limit of detection (LOD) of 29 fg/mL. This value is approximately 9.3 × 10³-fold lower than that of corresponding horseradish peroxidase (HRP)-based immunoassay (LOD = 270 pg/mL). The fluorescein molecule also had intrinsic peroxidase-like activity to catalyze 3,3',5,5'-tetramethylbenzidine oxidation with hydrogen peroxide for colorimetric signal. The proposed method with colorimetric mode further exhibited a sensitivity with a LOD of 17.7 pg/mL, which is about 15-fold lower than that of conventional HRP-based immunoassay. The recoveries of the proposed dual-mode immunoassay for AFP spiked serum samples ranged within 89.85%-100.0%, with the coefficient of variations ranging from 0.5% to 2.4%, indicating acceptable accuracy and precision for AFP quantitative detection. The reliability of the developed dual-mode immunoassay was further compared with a commercial chemiluminescence immunoassay kit by analyzing 20 clinical serum samples, showing that the two methods well agreed with each other, with high correlation coefficients of 0.997 and 0.986 based on recorded fluorescence and colorimetric signals, respectively. In summary, the proposed method was highly suitable for the ultrasensitive analysis of biomarkers or infectious diseases by fluorescence mode and can be used for routine clinical diagnosis by colorimetric mode.

Aflatoxin B1 Electrochemical Aptasensor Based on Tetrahedral DNA Nanostructures Functionalized Three Dimensionally Ordered Macroporous MoS2-AuNPs Film

In food safety evaluation, aflatoxin B1 (AFB1) is an important indicator. In this work, we developed an AFB1 electrochemical aptasensor based on a tetrahedral DNA nanostructures (TDNs) immobilized three dimensionally ordered macroporous MoS₂-AuNPs hybrid (3DOM MoS₂-AuNPs) recognition interface and horseradish peroxidase (HRP) functionalized magnetic signal amplifier. To greatly enhance the recognition efficiency, sensitivity, and stability of the aptasensor, the AFB1 aptamer-incorporated TDNs were ingeniously combined with the 3DOM MoS₂-AuNPs film for the construction of the sensing interface. The aptamers would release from the electrode surface after they reacted with AFB1, and then the hybridization-free TDNs formed. Thus, the biocomposite of DNA helper strands (H1)/HRP functionalized AuNPs-SiO₂@Fe₃O₄ nanospheres would combine with the hybridization-free TDNs due to the hybridization of H1 and TDNs. The more AFB1 existed in the solution, the more H1/HRP-AuNPs-SiO₂@Fe₃O₄ could be combined onto the 3DOM MoS₂-AuNPs surface. The current response coming from HRP-catalyzed reduction of H₂O₂ using thionine (Thi) as electrochemical probe was proportional with the AFB1 concentration. Upon optimal conditions, the aptasensor showed specificity for AFB1, achieving a good linear range of 0.1 fg/mL-0.1 μg/mL and the detection limit of 0.01 fg/mL. Furthermore, the developed aptasensor was also applied for detecting AFB1 content in rice and wheat powder samples, obtaining good results in conformity with those achieved from the high-performance liquid chromatography tandem mass spectrometry (HPLC-MS) method.

Fluorescence ELISA based on glucose oxidase-mediated fluorescence quenching of quantum dots for highly sensitive detection of Hepatitis B

Herein, we present a novel sandwich fluorescence enzyme linked immunosorbent assay (ELISA) for highly sensitive detection of Hepatitis B virus surface antigen (HBsAg) based on glucose oxidase (GOx)-induced fluorescence quenching of mercaptopropionic acid-modified CdTe quantum dots (MPA-QDs). In this system, hydrogen peroxide (H₂O₂) sensitive MPA-QDs was used as a signal output, and glucose oxidase (GOx) was used as label which can generate H₂O₂ via catalytic oxidation of glucose. The proposed method showed dynamic linear detection of HBsAg both in the range of 47pgmL^-1 ~ 380pgmL^-1 and 0.75ngmL^-1 ~ 12.12ngmL^-1. The detection limit of the proposed fluorescence ELISA was 1.16pgmL^-1, which was approximately 430-fold lower than that of horseradish peroxidase (HRP)-based conventional ELISA. The average recoveries for HBsAg-spiked serum samples ranged from 98.0% to 126.8% with the relative standard derivation below 10%, thus indicating acceptable precision and high reproducibility of the proposed fluorescence ELISA for HBsAg detection. Additionally, the developed method showed no false positive results analyzing 35 real HBsAg-negative serum samples, and exhibited excellent agreement (R²=0.9907) with a commercial time-resolved fluorescence immunoassay (TRFIA) kit for detecting 31 HBsAg-positive serum samples. In summary, the proposed method based on fluorescence quenching of H₂O₂ sensitive QDs is considerably to be an excellent biodetection platform with ultrahigh sensitivity, good accuracy and excellent reliability.