Ethnic seafood products sold on the Italian market: labelling assessment and biological, chemical and physical risk characterization

Physical and chemical food safety hazards and associated health risks in seafood: A Mediterranean perspective (Part 1)

Several risks to food safety are associated with seafood. The marine environment is heavily affected by various materials, both of physical and chemical nature, which have significant impact on the safety of seafood. Recently, there has been a concerning discovery regarding seafood contamination. As it appears, there are physical hazards present, specifically in the form of nano- and micro-plastic materials. Additionally, chemicals from various sources have been detected. These chemicals are commonly used in the production of convenience goods, antimicrobials, antibiotics, heavy metals and industrial effluents. This chapter has focused on the various hazards that can influence the safety of seafood in the marine environment. It covers both physical and chemical sources of these hazards, ensuring a comprehensive understanding of the potential risks involved. There are indications that the consumption of polluted seafood in the Mediterranean region can have negative impact on human health.

Microplastic contamination in commercially packaged edible seaweeds and exposure of the ethnic minority and local population in Mexico

Diet is an important pathway for microplastic exposure. This study examined distinct edible seaweed products sold at ethnic food stores in Mexico for microplastic contamination, as well as the exposure of the Asian ethnic minority and local population to microplastics. Microplastics were extracted from seaweed samples using a wet oxide digestion with hydrogen peroxide followed by zinc chloride density separation. They were subsequently detected, quantified, and the polymer type was determined via microscopic inspection and Fourier transform infrared spectroscopy. Microplastic contamination was detected in all samples, with an average abundance of 24.0 ± 9.4 items g-1. Fibrous-shaped (61 %) and non-colored (57 %) microplastics were prevalent. Microplastics with sizes smaller than 0.2 mm prevailed (60 %), and they have the potential to penetrate gut barriers and endanger human health. Polymers identified consisted of polyethylene-polypropylene, polyamide, cellophane, rayon, and polyethylene terephthalate. According to pollution load index values, seaweed samples were minimally contaminated with microplastics, with values ranging between 3.7 and 6.0. The estimated yearly intake of microplastic from seaweed consumption by the South Korean and Chinese populations in Mexico was 5.8 × 104 ± 2.3 × 104 and 5.7 × 104 ± 4.9 × 104, respectively. This study's findings highlight the importance of improved control measures for minimizing microplastics in foods for export.

Assessment of health risks associated with heavy metal concentration in seafood from North-Western Croatia

The following study aims at assessing the health risks associated with the consumption of the most commonly consumed seafood in the north-western part of Croatia due to the presence of heavy metals. Samples of seafood were collected and analysed for lead (Pb), cadmium (Cd), and mercury (Hg) content. Analyses of Cd and Pb were carried out by inductively coupled plasma mass spectrometry (ICP-MS) whereas Hg content was measured using atomic absorption spectrometry (AAS). Metal concentrations were in the following order Hg > Pb > Cd for the gilthead seabream, European hake, sardines, and tuna fish whereas in the Patagonian squid cadmium (Cd) was the heavy metal with the highest concentration, with the order of other metals being Cd > Hg > Pb. The heavy metal concentrations have been used to address the health risks using the Estimated Weekly Intake (EWI), Target Hazard Quotients (THQ), and Hazard Indices (HI). The findings revealed that the concentrations of the tested heavy metals, expressed on a per wet weight basis, did not exceed the Maximum Residue Levels (MRL) for those compounds mandated by national Croatian legislation. However, the HI for Hg was above 1, indicating a risk of adverse health effects due to the presence of this heavy metal in the consumed seafood. We conclude that the consumption of certain type of seafood such as the tuna fish should be limited when sensitive segments of the population such as children, elderly and pregnant women are concerned. Our results strongly advocate for a more stringent seafood quality control in the region.

Quantitative Detection of Viable but Nonculturable Vibrio parahaemolyticus in Frozen Bivalve Molluscs

Vibrio parahaemolyticus is a foodborne pathogen diffusely distributed in the marine environment and often isolated from raw seafood belonging to different species, mostly shellfish. Ingestion of under- or uncooked seafood contaminated by V. parahaemolyticus can cause severe gastrointestinal symptoms in humans. Due to its ability to withstand low temperatures, Vibrio spp. could survive in frozen seafoods for long periods by entering the viable but nonculturable state (VBNC) and may constitute an unrecognized source of food contamination and infection. In the present study, seventy-seven frozen bivalve molluscs (35 mussels; 42 clams) were subjected to the detection and enumeration of viable V. parahaemolyticus using standard culture methods. VBNC forms were detected and quantified by applying an optimized protocol based on Propidium Monoazide (PMA) and Quantitative PCR (qPCR). All samples were negative for both the detection and enumeration of V. parahaemolyticus by the standard culture methods. VBNC forms were detected in 11.7% of the samples (9/77), with values ranging from 1.67 to 2.29 Log CFU/g. Only clam samples were positive for the detection of VBNC forms. The results of this study highlighted that VBNC V. parahaemolyticus may be present in frozen bivalve molluscs. Further data on the prevalence of VBNC V. parahaemolyticus in frozen seafood are needed in order to perform a robust risk assessment.

Current Status and Future Trends in Removal, Control, and Mitigation of Algae Food Safety Risks for Human Consumption

With the rapid development of the economy and productivity, an increasing number of citizens are not only concerned about the nutritional value of algae as a potential new food resource but are also, in particular, paying more attention to the safety of its consumption. Many studies and reports pointed out that analyzing and solving seaweed food safety issues requires holistic and systematic consideration. The three main factors that have been found to affect the food safety of algal are physical, chemical, and microbiological hazards. At the same time, although food safety awareness among food producers and consumers has increased, foodborne diseases caused by algal food safety incidents occur frequently. It threatens the health and lives of consumers and may cause irreversible harm if treatment is not done promptly. A series of studies have also proved the idea that microbial contamination of algae is the main cause of this problem. Therefore, the rapid and efficient detection of toxic and pathogenic microbial contamination in algal products is an urgent issue that needs to be addressed. At the same time, two other factors, such as physical and chemical hazards, cannot be ignored. Nowadays, the detection techniques are mainly focused on three major hazards in traditional methods. However, especially for food microorganisms, the use of traditional microbiological control techniques is time-consuming and has limitations in terms of accuracy. In recent years, these two evaluations of microbial foodborne pathogens monitoring in the farm-to-table chain have shown more importance, especially during the COVID-19 pandemic. Meanwhile, there are also many new developments in the monitoring of heavy metals, algal toxins, and other pollutants. In the future, algal food safety risk assessment will not only focus on convenient, rapid, low-cost and high-accuracy detection but also be connected with some novel technologies, such as the Internet of Things (artificial intelligence, machine learning), biosensor, and molecular biology, to reach the purpose of simultaneous detection.

Seaweeds as a “Palatable” Challenge between Innovation and Sustainability: A Systematic Review of Food Safety

Moderate or severe food insecurity affect 2 billion people worldwide. The four pillars of food security (availability, access, use and stability) are in danger due to the impact of climatic and anthropogenic factors which impact on the food system. Novel foods, like seaweeds, have the potential to increase food yields so that to contribute in preventing or avoiding future global food shortages. The purpose of this systematic review was to assess microbiological, chemical, physical, and allergenic risks associated with seaweed consumption. Four research strings have been used to search for these risks. Preferred Reporting Item for Systematic Reviews and Meta-analysis (PRISMA) guidelines were applied. Finally, 39 articles met the selected criteria. No significant hazards for microbiological, allergenic, and physical risks were detected. Regarding chemical risk, algae can accumulate various heavy metals, especially when harvested in polluted sites. Cultivating seaweeds in a controlled environment allows to avoid this risk. Periodic checks will be necessary on the finished products to monitor heavy metals levels. Since the consumption of algae seems to be on the rise everywhere, it seems to be urgent that food control authorities establish the safety levels to which eating algae does not represent any risk for human health.

Suitability of DNA Sequencing Tools for Identifying Edible Seaweeds Sold in the United States

Seaweeds have been consumed by billions of people around the world and are increasingly popular in United States (US) diets. Some seaweed species have been associated with adverse health effects-such as heavy metal toxicity-and higher priced seaweeds may be more prone to adulteration. Knowing which species of seaweeds are being marketed in the US is important for protecting human health and preventing economic adulteration. Therefore, the United States Food and Drug Administration is developing new DNA-based species identification tools to complement established chemical methods for verifying the accurate labeling of products. Here, seaweed products available in the United States were surveyed using a tiered approach to evaluate a variety of DNA extraction techniques followed by traditional DNA barcoding via Sanger sequencing; if needed, genome skimming of total extracted nuclear DNA via next-generation sequencing was performed. This two-tiered approach of DNA barcoding and genome skimming could identify most seaweed samples (41/46), even those in blends (2/2, 1 out of 3 labeled species in each). Only two commercial samples appeared to be mislabeled or to contain unintended algal species. Five samples, labeled as "hijiki" or "arame", could not be confirmed by these DNA-based identification methods.