High sugar content impacts microstructure, mechanics and release of calcium-alginate gels

The Effect of Ingesting Alginate-Encapsulated Carbohydrates and Branched-Chain Amino Acids During Exercise on Performance, Gastrointestinal Symptoms, and Dental Health in Athletes

BACKGROUND

This study aimed to compare the effects of a carbohydrate (CHO) hydrogel with (ALG-CP) or without (ALG-C) branched-chain amino acids, and a CHO-only non-hydrogel (CON), on cycling performance. The hydrogels, encapsulated in an alginate matrix, are designed to control CHO release, potentially optimising absorption, increasing substrate utilisation, and reducing gastrointestinal distress as well as carious lesions.

METHODS

In a randomised, double-blinded, crossover trial, 10 trained male cyclists/triathletes completed three experimental days separated by ~6 days. During the experimental days, participants completed a standardised 2 h cycling bout (EX1), followed by a time-to-exhaustion (TTE) performance test at W75%. Supplements were ingested during EX1.

RESULTS

Participants cycled ~8.8 (29.6%) and ~5.4 (29.1%) minutes longer during TTE with ALG-CP compared to ALG-C and CON, respectively. TTE was 65.28 ± 2.8 min with ALG-CP, 56.46 ± 10.92 min with ALG-C, and 59.89 ± 11.89 min with CON. Heart rate (HR) was lower during EX1 with ALG-CP (p = 0.03), and insulin levels increased more significantly during the first 45 min with ALG-CP. Plasma glucose and glucagon levels remained consistent across supplements, although glucagon was higher with ALG-CP before TTE. Post-exercise myoglobin levels were lower with ALG-CP compared to ALG-C (p = 0.02), indicating reduced muscle damage.

CONCLUSIONS

While ALG-CP improved performance duration compared to ALG-C and CON, the difference did not reach statistical significance. Additionally, there was a lower HR during the cycling session, alongside a significantly lower level of myoglobin with ALG-CP. These findings suggest that ALG-CP may offer advantages in cycling performance and recovery.

Comparison of the Adsorption and Desorption Dynamics of Biological Molecules on Alginate Hydrogel Microcapsules-The Case of Sugars, Polyphenols, and Proteins

The aim of this work was to analyze and compare the adsorption and desorption processes of carbohydrates (glucose as a model molecule), polyphenols (gallic acid as a model molecule), and proteins (bovine serum albumin, BSA as a model molecule) on alginate microcapsules. The adsorption and desorption processes were described by mathematical models (pseudo-first-order, pseudo-second-order, and Weber-Morris intraparticle diffusion model for adsorption, and first-order, Korsmeyer-Peppas, and the Higuchi model for desorption) in order to determine the dominant mechanisms responsible for both processes. By comparing the values of adsorption rate (k2) and initial adsorption rate (h0) based on the pseudo-first-order model, the lowest values were recorded for BSA (k1 = 0.124 ± 0.030 min-1), followed by glucose (k1 = 0.203 ± 0.041 min-1), while the model-obtained values for gallic acid were not considered significant at p < 0.05. For glucose and gallic acid, the limiting step of the adsorption process is the chemical sorption of substances, and the rate of adsorption does not depend on the adsorbate concentration, but depends on the capacity of the hydrogel adsorbent. Based on the desorption rates determined by the Korsmeyer-Peppas model (k), the highest values were recorded for gallic acid (k = 3.66236 ± 0.20776 g beads/mg gallic acid per min), followed by glucose (k = 2.55760 ± 0.16960 g beads/mg glucose per min) and BSA (k = 0.78881 ± 0.11872 g beads/mg BSA per min). The desorption process from alginate hydrogel microcapsules is characterized by the pseudo Fickian diffusion mechanism.

The Effect of Alginate Encapsulated Plant-Based Carbohydrate and Protein Supplementation on Recovery and Subsequent Performance in Athletes

The main purpose of this study was to investigate the effect of a novel alginate-encapsulated carbohydrate-protein (CHO-PRO ratio 2:1) supplement (ALG) on cycling performance. The ALG, designed to control the release of nutrients, was compared to an isocaloric carbohydrate-only control (CON). Alginate encapsulation of CHOs has the potential to reduce the risk of carious lesions.

METHODS

In a randomised cross-over clinical trial, 14 men completed a preliminary test over 2 experimental days separated by ~6 days. An experimental day consisted of an exercise bout (EX1) of cycling until exhaustion at W~73%, followed by 5 h of recovery and a subsequent time-to-exhaustion (TTE) performance test at W~65%. Subjects ingested either ALG (0.8 g CHO/kg/hr + 0.4 g PRO/kg/hr) or CON (1.2 g CHO/kg/hr) during the first 2 h of recovery.

RESULTS

Participants cycled on average 75.2 ± 5.9 min during EX1. Levels of plasma branched-chain amino acids decreased significantly after EX1, and increased significantly with the intake of ALG during the recovery period. During recovery, a significantly higher plasma insulin and glucose response was observed after intake of CON compared to ALG. Intake of ALG increased plasma glucagon, free fatty acids, and glycerol significantly. No differences were found in the TTE between the supplements (p = 0.13) nor in the pH of the subjects' saliva.

CONCLUSIONS

During the ALG supplement, plasma amino acids remained elevated during the recovery. Despite the 1/3 less CHO intake with ALG compared to CON, the TTE performance was similar after intake of either supplement.

Potential Food and Nutraceutical Applications of Alginate: A Review

Alginate is an acidic polysaccharide mainly extracted from kelp or sargassum, which comprises 40% of the dry weight of algae. It is a linear polymer consisting of β-D-mannuronic acid (M) and α-L-guluronic acid (G) with 1,4-glycosidic linkages, possessing various applications in the food and nutraceutical industries due to its unique physicochemical properties and health benefits. Additionally, alginate is able to form a gel matrix in the presence of Ca²⁺ ions. Alginate properties also affect its gelation, including its structure and experimental conditions such as pH, temperature, crosslinker concentration, residence time and ionic strength. These features of this polysaccharide have been widely used in the food industry, including in food gels, controlled-release systems and film packaging. This review comprehensively covers the analysis of alginate and discussed the potential applications of alginate in the food industry and nutraceuticals.

Impact of Glucose on the Nanostructure and Mechanical Properties of Calcium-Alginate Hydrogels

Alginate is a polysaccharide obtained from brown seaweed that is widely used in food, pharmaceutical, and biotechnological applications due to its versatility as a viscosifier and gelling agent. Here, we investigated the influence of the addition of glucose on the structure and mechanical properties of alginate solutions and calcium-alginate hydrogels produced by internal gelation through crosslinking with Ca²⁺. Using ¹H low-field nuclear magnetic resonance (NMR) and small angle neutron scattering (SANS), we showed that alginate solutions at 1 wt % present structural heterogeneities at local scale whose size increases with glucose concentration (15–45 wt %). Remarkably, the molecular conformation of alginate in the gels obtained from internal gelation by Ca²⁺ crosslinking is similar to that found in solution. The mechanical properties of the gels evidence an increase in gel strength and elasticity upon the addition of glucose. The fitting of mechanical properties to a poroelastic model shows that structural changes within solutions prior to gelation and the increase in solvent viscosity contribute to the gel strength. The nanostructure of the gels (at local scale, i.e., up to few hundreds of Å) remains unaltered by the presence of glucose up to 30 wt %. At 45 wt %, the permeability obtained by the poroelastic model decreases, and the Young’s modulus increases. We suggest that macro (rather than micro) structural changes lead to this behavior due to the creation of a network of denser zones of chains at 45 wt % glucose. Our study paves the way for the design of calcium-alginate hydrogels with controlled structure for food and pharmaceutical applications in which interactions with glucose are of relevance.

The Impact of Sodium Alginate Hydrogel on Exogenous Glucose Oxidation Rate and Gastrointestinal Comfort in Well-Trained Runners

Purpose

The purpose of this study is to quantify the effect of adding sodium alginate and pectin to a carbohydrate (CHO) beverage on exogenous glucose (ExGluc) oxidation rate compared with an isocaloric CHO beverage.

Methods

Following familiarization, eight well-trained endurance athletes performed four bouts of prolonged running (105 min; 71 ± 4% of VO₂max) while ingesting 175 mL of one of the experimental beverages every 15 min. In randomized order, participants consumed either 70 g^.h⁻¹ of maltodextrin and fructose (10% CHO; NORM), 70 g^.h⁻¹ of maltodextrin, fructose, sodium alginate, and pectin (10% CHO; ENCAP), 180 g^.h⁻¹ of maltodextrin, fructose, sodium alginate, and pectin (26% CHO; HiENCAP), or water (WAT). All CHO beverages had a maltodextrin:fructose ratio of 1:0.7 and contained 1.5 g^.L⁻¹ of sodium chloride. Total substrate oxidation, ExGluc oxidation rate, blood glucose, blood lactate, serum non-esterified fatty acid (NEFA) concentration, and RPE were measured for every 15 min. Every 30 min participants provided information regarding their gastrointestinal discomfort (GID).

Results

There was no significant difference in peak ExGluc oxidation between NORM and ENCAP (0.63 ± 0.07 and 0.64 ± 0.11 g^.min⁻¹, respectively; p > 0.5), both of which were significantly lower than HiENCAP (1.13 ± 0.13 g^.min⁻¹, p < 0.01). Both NORM and HiENCAP demonstrated higher total CHO oxidation than WAT from 60 and 75 min, respectively, until the end of exercise, with no differences between CHO trials. During the first 60 min, blood glucose was significantly lower in WAT compared with NORM and HiENCAP, but no differences were found between CHO beverages. Both ENCAP and HiENCAP demonstrated a higher blood glucose concentration from 60–105 min than WAT, and ENCAP was significantly higher than HiENCAP. There were no significant differences in reported GID symptoms between the trials.

Conclusions

At moderate ingestion rates (i.e., 70 g^.h⁻¹), the addition of sodium alginate and pectin did not influence the ExGluc oxidation rate compared with an isocaloric CHO beverage. At very high ingestion rates (i.e., 180 g^.h⁻¹), high rates of ExGluc oxidation were achieved in line with the literature.

Electrostatic Interaction-Based Fabrication of Calcium Alginate-Zein Core-Shell Microcapsules of Regulable Shapes and Sizes

Core-shell microcapsules with combined features of hydrophilicity and hydrophobicity have become much popular. However, the assembly of biocompatible and edible materials in hydrophilic-hydrophobic core-shell microcapsules is not easy. In this work, based on electrostatic interactions, we prepared controllable calcium alginate (ALG)-zein core-shell particles of different shapes and sizes using hydrophilic ALG and hydrophobic zein by a two-step extrusion method. Negatively charged hydrogel beads of spherical, ellipsoidal, or fibrous shape were added into a positively charged zein solution (dissolved in 70% (v/v) aqueous ethanol solution) to achieve different-shaped core-shell particles. Interestingly, the size, shape, and shell thickness of the particles can be regulated by the needle diameter, stirring speed, and zein concentration. Moreover, for simplification, the core-shell particles were also synthesized by a one-step extrusion method, in which an ALG solution was added dropwise into a 70% (v/v) aqueous ethanol solution containing zein and CaCl₂. The particles synthesized in this work showed controlled digestion of encapsulated medium-chain triglyceride (MCT) and sustained release of encapsulated thiamine and ethyl maltol. Our preparation method is simplistic and can be extended to fabricate a variety of hydrophilic and hydrophobic core-shell structures to encapsulate a broad spectrum of materials.

Biomaterial-Assisted Regenerative Medicine

This review aims to show case recent regenerative medicine based on biomaterial technologies. Regenerative medicine has arousing substantial interest throughout the world, with “The enhancement of cell activity” one of the essential concepts for the development of regenerative medicine. For example, drug research on drug screening is an important field of regenerative medicine, with the purpose of efficient evaluation of drug effects. It is crucial to enhance cell activity in the body for drug research because the difference in cell condition between in vitro and in vivo leads to a gap in drug evaluation. Biomaterial technology is essential for the further development of regenerative medicine because biomaterials effectively support cell culture or cell transplantation with high cell viability or activity. For example, biomaterial-based cell culture and drug screening could obtain information similar to preclinical or clinical studies. In the case of in vivo studies, biomaterials can assist cell activity, such as natural healing potential, leading to efficient tissue repair of damaged tissue. Therefore, regenerative medicine combined with biomaterials has been noted. For the research of biomaterial-based regenerative medicine, the research objective of regenerative medicine should link to the properties of the biomaterial used in the study. This review introduces regenerative medicine with biomaterial.

The Feasibility of Using Pulsed-Vacuum in Stimulating Calcium-Alginate Hydrogel Balls

The effect of the pulsed-vacuum stimulation (PVS) on the external gelation process of calcium-alginate (Ca-Alg) hydrogel balls was studied. The process was conducted at four different working pressures (8, 35, 61, and 101 kPa) for three pulsed-vacuum cycles (one cycle consisted of three repetitions of 10 min of depressurization and 10 min of vacuum liberation). The diffusion coefficients (D) of calcium cations (Ca²⁺) gradually reduced over time and were significantly pronounced (p < 0.05) at the first three hours of the external gelation process. The rate of weight reduction (WR) and rate of volume shrinkage (S_v) varied directly according to the D value of Ca²⁺. A significant linear relationship between WR and S_v was observed for all working pressures (R² > 0.91). An application of a pulsed vacuum at 8 kPa led to the highest weight reduction and shrinkage of Ca-Alg hydrogel samples compared to other working pressures, while 61 kPa seemed to be the best condition. Although all textural characteristics (hardness, breaking deformation, Young’s modulus, and rupture strength) did not directly variate by the level of working pressures, they were likely correlated with the levels of WR and S_v. Scanning electron micrographs (SEM) supported that the working pressure affected the characteristics of Ca-Alg hydrogel structure. Samples stimulated at a working pressure of 8 kPa showed higher deformation with heterogenous structure, large cavities, and looser layer when compared with those at 61 kPa. These results indicate the PVS is a promising technology that can be effectively applied in the external gelation process of Ca-Alg gel.

Ultrasound assisted preparation of calcium alginate beads to improve absorption of Pb+2 from water

Calcium alginate (CaAlg) beads were prepared using ultrasound for use in the removal of lead from natural and wastewaters by ion exchange. Ultrasound was applied in a batch mode with an ultrasonic bath or in a flow mode using an ultrasonic clamp-on device. For comparison purposes the synthesis was performed in batch mode in the absence of the ultrasound. The beads prepared using ultrasound showed a greater ion exchange capability which could be ascribed to a larger specific surface area as a result of surface roughening induced by cavitation. Scanning Electron Microscopy (SEM) images revealed that the roughening was in the form of corrugation for the product with the best ion exchange capability obtained in the flow process where preformed CaAlg droplets were subjected to ultrasound during the setting process. These beads performed 11% better for lead removal than those synthesized in the absence of ultrasound.

Assessment of possibilities of strawberry jam reformulation

The prevalence of excessive weight gain, obesity, and associated diseases are permanently increasing. Therefore, the interest in food products with a composition suitable for people with the aforementioned health problems is also on the rise. The changes in food composition, nowadays often called reformulation, are mainly focused on reducing the amount of salt, sugar, or fat. Strawberry spreads with different sugar (10 – 40%) and strawberry (20 – 50%) content were prepared and the influence of strawberry jam composition on gel stiffness, colour, and sensory parameters was studied. This study aimed to determine the sensorial and technological limits (sugar and strawberry content) of strawberry jam reformulation. Carrageenan was chosen as a suitable gelling agent for the preparation of these reformulated strawberry products. strawberry spreads. The applicable concentration of carrageenan for the ideal stiffness of strawberry spreads was 2%. The results of the maximum compression force show a statistically significant increase of gel stiffness with increasing addition of strawberry puree, the effect of sugar content was also statistically significant (p = 0.05). This study showed that strawberry spreads with low strawberry and/or sugar content are sensorially acceptable.

The Effect of Ingesting Carbohydrate and Proteins on Athletic Performance: A Systematic Review and Meta-Analysis of Randomized Controlled Trials

Endurance athletes participating in sporting events may be required to complete multiple training sessions a day or on successive days with a limited recovery time. Nutritional interventions that enhance the restoration of endogenous fuel stores (e.g., liver and muscle glycogen) and improve muscle damage repair have received a lot of attention. The purpose of this review is to investigate the effect of ingesting carbohydrate (CHO) and protein (PRO) on athletic performance. Studies were identified by searching the electronic databases PubMed and EMBASE. Random-effects meta-analyses were conducted to examine the intervention efficacy. A total of 30 randomized controlled trials (RCT), comprising 43 trials and 326 participants in total, were included in this review. The meta-analysis showed an overall significant effect in Time-To-Exhaustion (TTE) and Time-Trial (TT) performance, when ingesting carbohydrates and proteins (CHO-PRO) compared to CHO-only (p = 0.03 and p = 0.0007, respectively). A subgroup analysis demonstrated a significant effect in TTE by ingesting CHO-PRO compared to CHO, when supplements were provided during and/or following an exercise bout. CHO-PRO significantly improved TTE compared to CHO-only, when a long-term recovery (i.e., ≥8 h) was implemented (p = 0.001). However, no effect was found when the recovery time was short-term (i.e., ≤8 h). No significant effect was observed when CHO-PRO and CHO-only supplements were isocaloric. However, a significant improved TTE was evident with CHO-PRO compared to CHO-only, when the supplements were matched for carbohydrate content (p < 0.00001). In conclusion, co-ingesting carbohydrates and proteins appears to enhance TTE and TT performance compared to CHO-only and presents a compelling alternate feeding strategy for athletes.

Effects of Thermal Treatment on the Physical Properties of Edible Calcium Alginate Gel Beads: Response Surface Methodological Approach

Calcium alginate gel (CAG) has been widely investigated for the development of artificial foods; however, there are few studies on its thermal stability. This study aimed to monitor changes in the physical properties of CAG beads during heat treatment using response surface methodology. Heating temperature (X₁, 40–100 °C) and heating time (X₂, 5–60 min) were chosen as independent variables. The dependent variables were rupture strength (Y₁, kPa), size (Y₂, μm), and sphericity (Y₃, %). The heating temperature (X₁) was the independent variable that had a significant effect on the rupture strength (Y₁) and size (Y₂). Rupture strength (Y₁) increased as the heating temperature (X₁) increased; at the same time, the CAG beads size (Y₂) decreased. With all conditions, the values of sphericity (Y₃) were over 94%. SEM images revealed that increase in the rupture strength of the CAG beads by heat treatment resulted from their porous structures. Loss of moisture by syneresis, occurring with heat treatment, was judged to create a dense porous structure of CAG beads. Our findings offer useful information for cooking or sterilizing food products utilizing CAG beads. In addition, thermal treatment could be applied to produce hard CAG beads with a high rupture strength.

All-Natural Food-Grade Hydrophilic-Hydrophobic Core-Shell Microparticles: Facile Fabrication Based on Gel-Network-Restricted Antisolvent Method

Hydrophilic-hydrophobic core-shell microparticles are highly appealing for a variety of industrial applications (foods, pharmaceutics, cosmetics, biomedicines, etc.) owing to their unique properties of moisture resistance and controlled release. However, the fabrication of such structured microparticles proves to be nontrivial due to the difficulty in assembling two materials of distinctly different hydrophilicities and hydrophobicities. This paper reports a facile method to fabricate hydrophilic-hydrophobic core-shell microparticles using all-natural food-grade polysaccharides and proteins, based on a novel principle of gel-network-restricted antisolvent precipitation. Immersion of microgel beads prepared from hydrophilic polysaccharides (i.e., alginates, κ-carrageenan, agarose) into a hydrophobic protein solution (i.e., zein in 70% aqueous ethanol) enables slow and controllable antisolvent precipitation of a protein layer around the microbead surface, leading to the formation of a hydrophilic-hydrophobic core-shell structure. The method applies to various gelling systems and can easily tailor the particle size and shell thickness. The resulting freeze-dried microparticles demonstrate restricted swelling in water, improved moisture resistance, and sustained release of encapsulants, with great potential in applications such as protection of unstable and/or hygroscopic compounds and delivery and controlled release of drugs, bioactives, flavors, etc. The method is rather universal and can be extended to prepare more versatile core-shell structures using a large variety of hydrophilic and hydrophobic materials.

Alginate and HM-pectin in sports-drink give rise to intra-gastric gelation in vivo

A polysaccharide drink containing 14% maltodextrin/fructose shows in vivo gelling behaviour as evidenced by magnetic resonance imaging.