Influence of treatment-induced modification of egg white proteins on foaming properties

Cysteine and dialysis mediated inhibition of dynamic changes in glycosylated egg white protein during storage

Glycosylation is commonly used to improve the solubility and functionality of egg white protein (EWP), but glycosylated EWP is prone to quality deterioration during storage. To enhance its storage stability, cysteine (Cys) addition and dialysis-based desugar treatment were applied to xylo-oligosaccharide (XOS) glycosylated EWP (GEW) in accelerated storage examinations. Both Cys addition and dialysis minimized changes in soluble protein content, color difference, and particle size during storage. Further, they inhibited the Maillard reaction and the accumulation of its intermediate products. Cys addition effectively maintained protein structures and prevented protein crosslinking. However, dialysis lost the filling and protective effect of free sugars, lowering the denaturation temperature of ovalbumin. Cys and dialysis effectively maintained the stability of emulsifying properties, while Cys better preserved gelation. Overall, both Cys addition and dialysis markedly enhanced the storage stability of GEW, with Cys proving to be more effective.

The CPDG treatment and dose-dependent effects of zein-stevioside conjugates on formation, drainage behavior, and interfacial structure of Pickering foam

In order to develop low-calorie zein-based desserts with improved stability of the foam interfacial membrane and delayed drainage behavior in food systems, a cold plasma-assisted deamidation and glycosylation (CPDG) technique was used to fabricate zein-stevioside conjugates in this study, and their dose-dependent effects on foam formation, drainage behavior, and interfacial structure were investigated. The results revealed that the CPDG treatment enhanced the viscosity (59.33 mPa·S), foamability (210.67 %), and foam stability (112.66 %) of conjugate dispersions. These conjugates at high concentrations (3 %, w/w) provided the plasticity of foam with a delayed drainage behavior for 90 min. SEM, CLSM, and dilatational rheology showed that the development of a complete and even interfacial structure, the protection of hydrophobic aggregation of CPDG-modified conjugates, and increased viscosity and strain-hardening at the air-water interface were all correlated to the enhanced stability. These results provide practical zein-based ingredients and processing guidelines for the plant-based foamy dessert industry.

Plant-based whipping cream: A promising sustainable alternative to dairy products

Future food is dedicated to transforming the traditional production model of the food industry, making people and the planet healthier, and addressing the challenges facing humanity. The development of plant-based foods is one of the core contents of future food and an important way to achieve green and low-carbon development of the food industry. A prevailing food trend in the dairy industry is the demand to develop various plant-based alternatives to dairy products. Plant-based whipping cream is a complex emulsion-foam system that can be transformed from an oil-in-water emulsion structure to a triphasic (solid-liquid-gas) foam structure by whipping, which should achieve a subtle balance between emulsion stability, whipping destabilization, and foam re-stabilization. This review aims to understand the science and technology underlying the development of plant-based whipping cream. The initial focus is on the fundamental principle of stabilization and destabilization of plant-based whipping cream, as the development of successful products depends on understanding their physicochemical basis. Three main processing technologies for the manufacture of plant-based whipping cream are then introduced: homogenization, sterilization, and tempering. Besides that, the role of the basic ingredients in plant-based whipping cream is highlighted, including vegetable fats, plant proteins, low-molecular-weight emulsifiers, and thickeners. In order to quantify and compare the quality attributes of different plant-based whipping cream products under standardized conditions, we provide an overview of characterization methods to evaluate emulsion stability, whipping destabilization, and foam re-stabilization of plant-based whipping cream. Subsequently, the legislations and regulations related to plant-based whipping cream products are introduced to cater to their market development. Finally, the current challenges faced by plant-based whipping cream are highlighted. This review aims to provide a guidance for researchers and manufacturers in related industries.

Innovative foam drying technique for salted egg yolk powder production

BACKGROUND

The powderization of salted egg yolks can circumvent the gelatinization issues that occur during frozen storage. In this study, salted egg yolk powder (SEYP) was prepared using microwave-assisted foam drying (MFD) technology.

RESULTS

The results show that, compared to traditional microwave drying and hot-air drying, the SEYP prepared by MFD exhibits a bright color and a loose structure, and shows significant improvements in emulsifying properties, lecithin retention rate and antioxidant activity (P < 0.05). The optimal microwave power for MFD of SEYP, established through principal component analysis, is 350 W, with no requirement for a cooking treatment of the salted egg yolks. Gas chromatography-mass spectrometry identified n-butanol, hexanal, nonanal, ethyl acetate, d-limonene and isopentanal as the primary volatile compounds in SEYP, contributing to its unique flavor profile. Furthermore, the SEYP prepared using MFD at 350 W also shows a reduction of 18.88% in the content of bitter-tasting amino acids compared with microwave drying.

CONCLUSION

In summary, MFD technology is a green and efficient drying method suitable for the preparation of flavor-type SEYP. © 2024 Society of Chemical Industry.

Novel technologies, effects and applications of modified plant proteins by Maillard reaction and strategies for regulation: A review

With an increase in awareness of health, environmental conservation and animal welfare, the market for plant proteins is expanding. However, the low solubility and poor functional properties of plant proteins near the isoelectric point limit their application in food processing. Glycosylation refers to the structural modification of proteins by introduction of polysaccharides to form protein-polysaccharide conjugates in the early stages of Maillard reaction. Glycosylation is a green and efficient method that has been proved to produce modified proteins with superior solubility, emulsifying and forming properties. Glycosylation and the application of protein-carbohydrate conjugates have become research hotspots in recent years. This paper presented a comprehensive review of the effects of glycosylation on the functional properties of plant proteins and the mechanisms of non-thermal physical treatments assisted glycosylation. It was demonstrated that glycosylation modified the structure of plant proteins and improved their functional properties. Non-thermal physical treatments assisted glycosylation increased the reactive sites of plant proteins and further improved their functional properties. Protein-carbohydrate conjugates could be applied in delivery systems, films, emulsifiers and other applications, which have significant research prospects in food applications.

Citric Acid Improves Egg White Protein Foaming Characteristics and Meringue 3D Printing Performance

Meringue has limited the use of meringue for personalization because of its thermally unstable system. Citric acid (CA) enhancement of egg white protein (EWP) foaming properties is proposed for the preparation of 3D-printed meringues. The results showed that CA increased the viscosity, exposure of hydrophobic groups (79.8% increase), and free sulfhydryl content (from 5 µmol/g to 34.8 µmol/g) of the EWP, thereby increasing the foaminess (from 50% to 178.2%). CA treatment increased the rates of adsorption, stretching, and orientation of EWP at the air-water interface to form multiple layers, resulting in a delay in foam thinning. The secondary structure of CA-treated EWP remained intact, and the exposure of amino acid residues in the tertiary structure increased with the expansion of the hydrophobic region. CA-treated EWP-prepared protein creams had a suitable viscosity (from 233.4 Pa·s to 1007 Pa·s at 0.1 s-1), shear thinning, structural restorability, and elasticity, which ensured good fidelity of their printed samples. Experiments involving 3D printing of CA-treated EWP showed that CA could significantly enhance the 3D printing fidelity of EWP. Our study could provide new ideas for the development of customizable 3D-printed foam food products.

Role of ultrasound and pectin in regulating the foaming properties and baking applications of liquid egg white

The capacity of liquid egg white (LEW) to generate foam has become crucial in food processing. This study investigated the impact of ultrasound (US) and pectin in regulating the foaming properties and baking applications of LEW. Results showed that US treatment combined with pectin significantly (P < 0.05) improved foam ability (FA) from 142 ± 3.464 % to 236 ± 2.65 % and foam stability (FS) from 33.32 ± 2.63 % to 60.4 ± 1.82 %. The lowest surface tension achieved was 44.691 mN/m for EW600 + 1 % P. High-intensity US and pectin also enhanced the ξ-potential, solubility, and surface hydrophobicity. Dynamic rheological analysis indicated increased in apparent viscosity and viscoelasticity. Furthermore, increasing US power led to significant turbidity enhancements, rising from 41.22 ± 0.093 % to 96.30 ± 0.026 % (P < 0.05). Importantly, angel cakes made from US-treated LEW with pectin showed a higher specific volume, with EW600 + 1 % P reaching 3.2297 ± 0.017 mL/g compared to 2.9258 ± 0.022 mL/g for the control (P < 0.05). These findings suggest that US and pectin enhance foaming rates and baking performance, addressing reduced FS in egg whites (EW) and angel cakes when different US treatments were applied alone.

Effect of Physical Treatments on Functional Properties of Whey and Soy Protein Isolates in Oleogel Production Through Foam Template Method

This study aimed to investigate the impact of physical treatments, namely heat (70 °C for 48 h), atmospheric cold plasma (10 kW for 20 min), and ultrasonic frequency (40 kHz for 15 min), on the physicochemical and interfacial properties of soy protein isolate (SPI) and whey protein isolate (WPI) in the context of oleogel production by foam template (cryogel) method. The physical modification of both SPI and WPI was monitored using SDS-PAGE, Fourier transform infrared spectroscopy (FTIR) spectroscopy, and differential scanning calorimetry (DSC), measuring interfacial tension, color, solubility, foam volume, foam stability, and, finally, the density and oil absorption of the produced cryogel. The findings revealed that the application of ultrasonic waves resulted in a significant reduction in the content of alpha-helical of SPI and WPI while the other treatments increased the content of random coil proteins. FTIR analysis further showed that ultrasonic and heat treatment led to a decrease in C-N tensile vibration within the range of 1200-1650 cm-1 in SPI. Meanwhile, in cold plasma treatment, an increase was observed which was confirmed by the elevation of enthalpy from 100 to 128 kJ/kg. Physical treatments significantly altered the surface properties of both SPI and WPI, where this value was reduced in SPI and increased in WPI. The cold plasma method demonstrated superior performance in enhancing the solubility of SPI from 10 to 58.2%, while the solubility of WPI decreased from 96.4 to 90.4%. By modifying the proteins, the foam volume and oil adsorption ability of the related cryogel improved, as shown by the maximum oil absorption obtained after ultrasonic treatment for SPI (11.6 g/g) and cold plasma (9.17 g/g) for WPI. These results could be useful in applying physical treatments to modify proteins and create the cryogel as an oleogel template for structuring liquid oil and producing innovative health value-added foods.

Study on the Structural Characteristics and Foaming Properties of Ovalbumin-Citrus Pectin Conjugates Prepared by the Maillard Reaction

This study explored the structural features and foaming properties of ovalbumin (OVA) and its glycosylated conjugates with citrus pectin (CP) formed through the Maillard reaction. The results demonstrated that OVA and CP were successfully conjugated, with the degree of grafting increasing to 43.83% by day 5 of the reaction. SDS-PAGE analysis confirmed the formation of high-molecular-weight conjugates. Fourier-transform infrared (FT-IR) and fluorescence spectroscopy further revealed alterations in the secondary and tertiary structures of OVA, including an enhanced β-sheet content, a reduced β-turn content, and the depletion of tryptophan residues. Moreover, the surface hydrophobicity of the OVA-CP conjugates significantly increased, enhancing foaming properties. Furthermore, the analysis of foaming properties exhibited that the Maillard reaction improved the foaming capacity of OVA to 66.22% and foaming stability to 81.49%. These findings highlight the potential of glycosylation via the Maillard reaction to significantly improve the foaming properties of OVA, positioning it as a promising novel foaming agent.

Cyclic Continuous Glycation Enhanced Dispersibility of Myofibrillar Protein: Reaction Efficiency and Sites Modification

Reaction efficiency in glycation lacks sufficient attention, leading to the waste of process costs. Cyclic continuous glycation (CCG) is an effective approach to accelerate covalent binding between myofibrillar protein (MP) and glucose. This study elucidated that CCG promoted the exposure of reactive glycated sites in MP with full unfolding of secondary and tertiary structures. Notably, the glycation rate was significantly increased by 65.43%. Physicochemical properties indicated that MP-glucose conjugates with high graft degree exhibited favorable solubility, dispersibility, and thermal stability. Furthermore, proteomics was applied to reveal the glycated sites and products in glycoconjugates of MP. Glycation preferentially acted on the tails of the myosin heavy chain. The glucosylation modification on the head region was enhanced by CCG contributing to the inhibition of the head-head interaction. Overall, this study systematically clarifies the mechanism of CCG, providing a theoretical basis for the application of glycation in innovative meat products.

Effects of Protein on Green Tea Quality in a Milk-Tea Model during Heat Treatment: Antioxidant Activity, Foaming Properties, and Unbound Small-molecule Metabolome

Tea drinks/beverage has a long history and milk is often added to enhance its taste and nutritional value, whereas the interaction between the tea bioactive compounds with proteins has not been systematically investigated. In this study, a milk-tea model was prepared by mixing green tea solution with milk and then heated at 100°C for 15 min. The milk tea was then measured using biochemical assay, antioxidant detection kit, microscopy as well as HPLC-QTOF-MS/MS after ultrafiltration. The study found that as the concentration of milk protein increased in the milk-tea system, the total phenol-protein binding rate raised from 19.63% to 51.08%, which led to a decrease in free polyphenol content. This decrease of polyphenol was also revealed in the antioxidant capacity, including 2,2-diphenyl-1-picrylhydrazyl radical scavenging ability and ferric ion reducing antioxidant power, in a dose-dependent manner. Untargeted metabolomics results revealed that the majority of small-molecule compounds/polyphenols in tea, such as epigallocatechin gallate, (-)-epicatechin gallate, and Catechin 5,7,-di-O-gallate, bound to milk proteins and were removed by ultrafiltration after addition of milk and heat treatment. The SDS-PAGE and Native-PAGE results further indicated that small molecule compounds in tea formed covalent and non-covalent complexes by binding to milk proteins. All above results partially explained that milk proteins form conjugates with tea small-molecule compounds. Consistently, the particle size of the tea-milk system increased as the tea concentration increased, but the polymer dispersity index decreased, indicating a more uniform molecular weight distribution of the particles in the system. Addition of milk protein enhanced foam ability in the milk-tea system but reduced foam stability. In summary, our findings suggest that the proportion of milk added to tea infusion needs to be considered to maintain the quality of milk-tea from multiple perspectives, including stability, nutritional quality and antioxidant activity.

Effect of thermal and non-thermal processing methods on the Structural and Functional Properties of Whey Protein from Donkey Milk

This study evaluated the impact of thermal, ultrasonication, and UV treatment on the structural and functional properties of whey proteins from donkey milk (DWP). Whey proteins exhibited notable stability in non-heat-treated environments, while their structural and functional characteristics were notably impacted by excessive heat treatment. The application of high-temperature long-time thermal treatment (HTLT) resulted in a decrease in fluorescence intensity, foaming and emulsification stability, and considerable damage to the active components of the proteins. Specifically, the preservation of lysozyme activity was only 23%, and lactoferrin and immunoglobulin G exhibited a significant loss of 70% and 77%, respectively. Non-thermal treatment methods showed superior efficacy in preserving the active components in whey proteins compared with heat treatment. Ultrasonic treatment has demonstrated a notable capability in diminishing protein particle size and turbidity, and UV treatment has been observed to have the ability to oxidize internal disulfide bonds within proteins, consequently augmenting the presence of free sulfhydryl groups, which were beneficial to foaming and emulsification stability. This study not only offers a scientific basis for the processing and application of DWP but also serves as a guide to produce dairy products, aiding in the development of dairy products tailored to specific health functions.

Tri-component hydrocolloid as egg white replacement in meringues: gellan gum with soy protein isolate and maltodextrin

BACKGROUND

In the quest for sustainable food ingredients, the present study delves into the potential of a tri-component hydrocolloid blend, comprising gellan gum (GG), soy protein isolate (SPI) and maltodextrin (MD), as a replacement for egg white in meringue production. The research aims to elucidate the intricate physical properties of meringue containing this tri-component structure, focusing on foaming dynamics, rheological behavior and the textural properties of the resulting meringue cookies.

RESULTS

Experiments were conducted with various hydrocolloids (k-carrageenan, GG, and locust bean gum) and GG was identified as optimal for improving foaming capacity and foaming stability. Rheological evaluations showed a positive correlation between increased GG concentration within the tri-component matrix and an increase in both storage modulus (G') and loss modulus (G"), indicating improved structural integrity. Furthermore, a comparative analysis of the texture profiles of cookies prepared with this blend highlighted the ability of higher GG concentrations to satisfactorily replicate the tactile and visual qualities of traditional egg white-based meringues. This result was particularly evident compared to formulations utilizing solely SPI or the combined SPI-MD configuration.

CONCLUSION

Conclusively, the results of the present study highlight the significant potential of the GG-SPI-MD tri-component structure to closely mimic the critical properties of egg white, thus offering a promising plant-based alternative for meringue production. © 2024 Society of Chemical Industry.

Application of soy protein isolate-naringenin complexes as fat replacers in low-fat cream: Based on protein conformational changes, aggregation states and interfacial adsorption behavior

In this study, changes in the structural and functional properties of soybean protein isolate (SPI)-naringenin (NG) complexes under different amounts of naringenin treatments were explored, elucidating the effect of the complexes as fat replacers at the 15 % substitution level on the properties of low-fat cream. Finally, the correlation between the structure and function of the complex and the properties of low-fat cream was further analyzed. The addition of NG promotes the increase of SPI aggregation and particle size, and reduces the interfacial tension of the complex. Meanwhile, at the mass ratio of 48:3, NG and SPI formed a dendritic network structure suitable for stabilizing cream. The fat properties of cream indicate that low-fat creams stabilized by appropriate proportions of SPI-NG complexes displayed small and dense fat crystal network structures. In addition, low-fat cream stabilized by the SPI-NG complexes have improved whipping time, overrun, firmness, storage stability and rheological properties compared to natural SPI. It is worth noting that the overall quality of the cream stabilized by the SPI-NG complex with a mass ratio of 48:3 was almost close to that of full-fat cream. Therefore, this study promotes the potential applications of protein-polyphenol complexes as fat replacers in the food industry.

Enhancing the usability of pea protein in emulsion applications through modification by various approaches: A comparative study

The extensive utilization in food industry of pea protein is often impeded by its low water solubility, resulting in poor functional properties. Various methods, including pH-shifting (PS), ultrasonication (US), high-pressure micro-fluidization (MF), pH-shifting combined with ultrasonication (PS-US), and pH-shifting with micro-fluidization (PS-MF), were utilized to modify pea protein isolate (PPI) in order to enhance its functionality in emulsion formulation. The physicochemical properties and structural changes of the protein were investigated by assessing solubility, particle size, surface charge, protein profile, surface hydrophobicity, free sulfhydryl groups, and secondary structure content. The extent of modification induced by each treatment method on PPI-stabilized emulsions was compared based on parameters such as adsorbed interfacial protein concentration, particle size, zeta potential, and microstructure of the prepared emulsions. All modification increased the solubility of pea protein in the sequence of PS (4-fold) < MF (7-fold) < US (11-fold) < PS-US (13-fold) < PS-MF (14-fold). For single treatments, proteins dissolved more readily under US, resulting in the most uniform emulsions with small particle. The combined processes of PS-US and PS-MF further improved solubility, decreased emulsions particle size, promoted uniformity of emulsions. PS-US-stabilized emulsions displayed more smaller droplet size, narrower size distribution, and slightly higher stability than those prepared by PS-MF. The relatively higher emulsifying capacity of PPI treated by PS-US than those by PS-MF may be attributed to its higher surface hydrophobicity.

Foam and fluid properties of purified saponins and non-purified water extracts from Camellia oleifera cake (by-product)

The physicochemical and foam properties of non-purified water extracts (WE) and purified tea saponins (TS) from Camellia oleifera cake (byproduct) were compared. WE showed different fluid properties at equal saponin concentrations (1.0 wt%) compared to TS. Particularly, it exhibited limited micelle size (average 434.1 nm), effective viscosity (0.15 Pa·s), and surface tension (43.9 mN/m) independently of pH. Moreover, the foam properties of WE were comparable to TS and better than sodium caseinate, especially foam stability. WE foam was more stable than TS foam under pH (3-7) and heating (40-80 °C). In the presence of NaCl, sucrose, and ethanol (5-20 wt%), WE and TS were effective and had similar foam behavior. Low concentrations of sucrose (<10 wt%)/ethanol (<20 wt%) significantly increased the foam capacity, while ethanol over 30 wt% was unfavorable. WE/TS foam contributes significantly to the desired physicochemical and sensory attributes (taste, texture, and appearance) of foods.

Irradiation-Assisted Enhancement of Foaming and Thermal Gelation Functionality of Liquid Egg White

Ionizing radiation has its unique popularity as a non-thermal decontamination technique treating with protein-rich foodstuffs to ensure the microbial and sensory quality, particularly for shell eggs. However, the changes in the functional properties of egg protein fractions such as liquid egg white (LEW) with macro/microstructural information are still controversial. Hence, this study was designed to elaborate the foaming and heat-set gelation functionality of LEW following different γ-ray irradiation dose treatments (0, 1, 3 or 5 kGy). For such, the physicochemical properties (active sulfhydryl and the hydrophobicity of protein moieties), structural characteristics (through X-ray diffraction, Fourier-transform infrared spectroscopy and differential scanning calorimetry) and interfacial activities (rheological viscosity, interfacial tension, microrheological performance) were investigated. Then, the thermal gelation of LEW in relation to the texture profile and microstructure (by means of a scanning electron microscope) was evaluated followed by the swelling potency analysis of LEW gel in enzyme-free simulated gastric juice. The results indicated that irradiation significantly increased the hydrophobicity of liquid egg white proteins (LEWPs) (p < 0.05) by exposing non-polar groups and the interfacial rearrangement from a β-sheet to linear and smaller crystal structure, leading to an enhanced foaming capacity. Microstructural analysis revealed that the higher dose irradiation (up to 5 kGy) could promote the proteins' oxidation of LEW alongside protein aggregates formed in the amorphous region, which favored heat-set gelation. As evidenced in microrheology, ≤3 kGy irradiation provided an improved viscoelastic interface film of LEW during gelatinization. Particularly, the LEW gel treated with 1 kGy irradiation had evident swelling resistance during the times of acidification at pH 1.2. These results gave new insight into the irradiation-assisted enhancement of foaming and heat-set gelation properties of LEW.

Valorisation of prawn/shrimp shell waste through the production of biologically active components for functional food purposes

BACKGROUND

The aim of the work was to develop a technology for using waste from prawn and shrimp processing as a source of active ingredients that could be used in the promotion of healthy foods. From fresh and freeze-dried prawn and shrimp shells, protein hydrolysates (carotenoproteins) were obtained using two different enzymes, Flavourzyme and Protamex.

RESULTS

The obtained hydrolysates were characterised in terms of protein content, degree of hydrolysis, and antioxidant and antimicrobial activity. The hydrolysate with the best antioxidant properties (FRAP value of 2933.33 μmol L-1 TE; ORAC value of 115.58 μmol L-1 TE) was selected and tested for its possible use as a component of functional foods. Molecular weight distribution, amino acid profile and free amino acids, the solubility of the hydrolysate in different pH ranges as well as foaming ability were determined. It was found that this hydrolysate was characterised by an amino acid profile with high nutritional value, flavour enhancement properties and excellent solubility in a wide pH range (from 97.06% to 100%). Afterward, the possibility of using carotenoproteins from prawn waste as a component of an emulsion with furcellaran and a lipid preparation of astaxanthin, taken from post-hydrolysate production waste, was investigated. The obtained complexes were stable as proved by the measurement of zeta potential (ζ = -23.87 and -22.32 to -27.79 mV).

CONCLUSION

It is possible to produce stable complexes of the hydrolysate with furcellaran and to emulsify a lipid preparation of astaxanthin, obtained from waste following production of the hydrolysate, in them. © 2023 Society of Chemical Industry.

An overview of edible foams in food and modern cuisine: Destabilization and stabilization mechanisms and applications

Foam, as a structured multi-scale colloidal system, is becoming increasingly popular in food because it gives a series of unique textures, structures, and appearances to foods while maintaining clean labels. Recently, developing green and healthy food-grade foaming agents, improving the stability of edible foams, and exploring the application of foam structures and new foaming agents have been the focus of foam systems. This review comprehensively introduces the destabilization mechanisms of foam and summarizes the main mechanisms controlling the foam stability and progress of different food-grade materials (small-molecular surfactants, biopolymers, and edible Pickering particles). Furthermore, the classic foam systems in food and modern cuisine, their applications, developments, and challenges are also underlined. Natural small-molecular surfactants, novel plant/microalgae proteins, and edible colloidal particles are the research hotspots of high-efficiency food-grade foam stabilizers. They have apparent differences in foam stability mechanisms, and each exerts its advantages. However, the development of foam stabilizers remains to be enriched compared with emulsions. Food foams are diverse and widely used, bringing unique enjoyment and benefit to consumers regarding sense, innovation, and health attributes. In addition to industrial inflatable foods, the foam foods in molecular gastronomy are also worthy of exploration. Moreover, edible foams may have greater potential in structured food design, 3D/4D printing, and controlled flavor release in the future. This review will provide a reference for the efficient development of functional inflatable foods and the advancement of foam technologies in modern cuisine.

A novel strategy by combining foam fractionation with high-speed countercurrent chromatography for the rapid and efficient isolation of antioxidants and cytostatics from Camellia oleifera cake

Camellia oleifera cake is a by-product, which is rich in functional chemical components. However, it is typically used as animal feed with no commercial value. The purpose of this study was to isolate and identify compounds from Camellia oleifera cake using a combination of foam fractionation and high-speed countercurrent chromatography (HSCCC) and to investigate their biological activities. Foam fractionation with enhanced drainage through a hollow regular decahedron (HRD) was first established for simultaneously enriching flavonoid glycosides and saponins for further separation of target compounds. Under suitable operating conditions, the introduction of HRD resulted in a threefold increase in enrichment ratio with no negative effect on recovery. A novel elution-extrusion countercurrent chromatography (EECCC) coupled with the consecutive injection mode was established for the successful simultaneous isolation of flavonoid glycosides and saponins. As a result, 38.7 mg of kaemferol-3-O-[2-O-D-glucopyranosyl-6-O-α-L-rhamnopyranosyl]-β-D-glucopyranoside (purity of 98.17%, FI), 70.8 mg of kaemferol-3-O-[2-O-β-D-xylopyranosyl-6-O-α-L-rhamnopyranosyl]-β-D-glucopyranoside (purity of 97.52%, FII), and 560 mg of an oleanane-type saponin (purity of 92.32%, FIII) were separated from the sample (900 mg). The present study clearly showed that FI and II were natural antioxidants (IC50 < 35 μg/mL) without hemolytic effect. FIII displayed the effect of inhibiting Hela cell proliferation (IC50 < 30 μg/mL). Further erythrocyte experiments showed that this correlated with the extremely strong hemolytic effect of FIII. Overall, this study offers a potential strategy for efficient and green isolation of natural products, and is beneficial to further expanding the application of by-products (Camellia oleifera cake) in food, cosmetics, and pharmacy.

Quantitative proteomics provides new insights into the mechanism of improving rehydration of egg white powder by ultrasonic pretreatment

Poor rehydration is one of the key factors affecting the functional properties of egg white powder (EWP). Reducing rehydrated precipitates is important for the processing and application of EWP. In this study, effects of ultrasonic pretreatment on the physicochemical and functional properties of EWP rehydration solutions were studied with the aim of revealing the mechanism of ultrasonic pretreatment to improve rehydration. Compared with freeze-dried EWP (FD) and spray-dried EWP (SD), the percentage of ultrasonic pretreated FD (UFD) and ultrasonic pretreated SD (USD) rehydrated precipitates decreased by 13.0 % and 5.6 %, respectively, after ultrasonic pretreatment (0.25 W/mL for 10 min); and the average particle sizes of UFD and USD solutions decreased by 22.5 % and 15.5 %, respectively. Fourier transform infrared spectroscopy showed that ultrasonic pretreatment caused higher β-sheet content in the protein secondary structure of UFD rehydrated precipitates (49.2 %). Quantitative proteomic analysis revealed a decrease in the abundance of major egg white proteins (ovalbumin, ovotransferrin, ovomucoid and ovomucin) in the rehydrated precipitates of UFD, except for lysozyme. It was also shown that lysozyme-centered aggregates were disrupted in the rehydrated precipitates of UFD. Our research suggests that ultrasonic pretreatment improves EWP rehydration by reducing the interactions between high abundance proteins as well as improving the solubility of high abundance proteins.

Improvement of foaming properties of ovalbumin: Insights into the synergistic effect of preheating and high-intensity ultrasound on physicochemical properties and structure analysis

Ovalbumin (OVA), characterized by its high concentration in eggs, possesses remarkable foaming properties. Nevertheless, OVA is highly sensitive to thermal changes and acid-base conditions, substantially hampering its application potential for foaming purposes within the food industry. This experiment aimed to examine the effects of preheating and high-intensity ultrasound (HIU) treatment at different powers on OVA foaming properties and explore the underlying mechanisms. The results revealed that OVA exhibited the highest foaming capacity (31.5 %) and foaming stability (96.7 %) under the treatment condition of 200w + 60°C. Additionally, significant improvements were observed in the content of free sulfhydryl groups (37.27 μmg/g), solution viscosity (142.33 mPa·s), and surface hydrophobicity (37.27 μg BPB) under this condition. The absolute value of the zeta potential (-10.28 mV) was significantly increased in the 200w + 60°C treatment group. Moreover, the polymer dispersity index of OVA (0.6045) was significantly reduced, resulting in improved dispersion than the control group. The structural analysis revealed significant changes in the α-helix and β-sheet content of OVA after treatment at 200w + 60 °C. The X-ray diffraction pattern exhibited sharper peaks, indicating a crystal structure, and the fluorescence peak displayed a slight blue shift along with increased hydrophobicity. Moreover, the preheating and HIU treatment induced a continuous uneven and irregular pore structure in OVA, which ultimately enhanced its foaming properties. In conclusion, the preheating and HIU treatment offers a novel approach to enhance the foaming properties of OVA.

Enhanced properties of non-starch polysaccharide and protein hydrocolloids through plasma treatment: A review

Hydrocolloids are important ingredients in food formulations and their modification can lead to novel ingredients with unique functionalities beyond their nutritional value. Cold plasma is a promising technology for the modification of food biopolymers due to its non-toxic and eco-friendly nature. This review discusses the recent published studies on the effects of cold plasma treatment on non-starch hydrocolloids and their derivatives. It covers the common phenomena that occur during plasma treatment, including ionization, etching effect, surface modification, and ashing effect, and how they contribute to various changes in food biopolymers. The effects of plasma treatment on important properties such as color, crystallinity, chemical structure, rheological behavior, and thermal properties of non-starch hydrocolloids and their derivatives are also discussed. In addition, this review highlights the potential of cold plasma treatment to enhance the functionality of food biopolymers and improve the quality of food products. The mechanisms underlying the effects of plasma treatment on food biopolymers, which can be useful for future research in this area, are also discussed. Overall, this review paper presents a comprehensive overview of the current knowledge in the field of cold plasma treatment of non-starch hydrocolloids and their derivatives and highlights the areas that require further investigation.

Bioactive food-derived peptides for functional nutrition: Effect of fortification, processing and storage on peptide stability and bioactivity within food matrices

New challenges in food production and processing are appearing due to increasing global population and the purpose of achieving a sustainable food system. Bioactive peptides obtained from food proteins can be employed to prevent or pre-treat several diseases such as diabetes, cardiovascular diseases, inflammation, thrombosis, cancer, etc. Research on the bioactivity of protein hydrolysates is very extensive, especially in vitro tests, although there are also tests in animal models and in humans studies designed to verify their efficacy. However, there is very little published literature on the functionality of these protein hydrolysates as an ingredient in food matrices, as well as the effect that thermal or non-thermal processing, and storage may have on the bioactivity of these bioactive peptides. This review aims to summarize the published literature on protein hydrolysates as a functional ingredient including processing, storage and simulated gastrointestinal digestion regarding the bioactivity of these peptides inside food matrices.

Biocomposite Foams with Multimodal Cellular Structures Based on Cork Granulates and Microwave Processed Egg White Proteins

In an effort to reduce greenhouse gas emission, reduce the consumption of natural resources, and increase the sustainability of biocomposite foams, the present study focuses on the recycling of cork processing waste for the production of lightweight, non-structural, fireproof thermal and acoustic insulating panels. Egg white proteins (EWP) were used as a matrix model to introduce an open cell structure via a simple and energy-efficient microwave foaming process. Samples with different compositions (ratio of EWP and cork) and additives (eggshells and inorganic intumescent fillers) were prepared with the aim of correlating composition, cellular structures, flame resistance, and mechanical properties.

Fibrillation modification to improve the viscosity, emulsifying, and foaming properties of rice protein

Fibrillation of food proteins has attracted considerable attention as it can improve and broaden the functionality of proteins. In this study, we prepared three kinds of rice protein (RP) fibrils with different structural characteristics by the regulation of NaCl and explored the effect of protein structure on viscosity, emulsifying, and foaming properties. AFM results showed fibrils formed at 0 and 100 mM NaCl were mainly in the range of 50-150 nm and 150-250 nm, respectively. Fibrils formed at 200 mM NaCl were in the range of 50-500 nm and protein fibrils longer than 500 nm increased. There was no significant difference between their height and periodicity. Fibrils formed at 0 and 100 mM NaCl were more flexible and unordered than those formed at 200 mM NaCl. The viscosity consistency index K of native RP and fibrils formed at 0, 100, and 200 mM NaCl were determined. The K value of fibrils was higher than that of native RP. The emulsifying activity index, foam capacity and foam stability were enhanced by fibrillation, while longer fibrils exhibited lower emulsifying stability index, which may be because long fibrils resulted in difficulty of cover of emulsion droplets. In summary, our work provided a valuable reference for improving the functionality of rice protein and facilitated the development of protein-based foaming agents, thickeners, and emulsifiers.

Application of egg white hydrolysate (EWH) to improve frothing functionality of pasteurized liquid egg in large quantity production

Sterilized Liquid Eggs (SLE) are convenient for the baking process by minimizing the food safety risks of fresh eggs. Although these advantages were encouraging, the thermal effects of the pasteurization process had a negative impact on the functionality of the egg whites, thus making them unattractive to the food industry. Therefore, our previous study found that adding 1-5% egg white hydrolysate (EWH) contributed to the foaminess and stability in SLE. This primary purpose of this study was to confirm the feasibility of applying the optimum concentration of EWH for simultaneous evaluation and shelf life for batch production of SLE. The physical characteristics of the foam were analyzed by adding 1 ± 0.2% of EWH to SLE, and it was found that the foam with 1% EWH had better stability (low drainage), better viscosity, and similar distribution of foam bubbles size in the microstructure. No Salmonella infection has been found during the shelf life of 7 days. In addition, the highest overall acceptability has obtained using the large quantity produced SLE with 1% EWH to produce spoon cookies, followed by sensory evaluation. The cross-sectional height of the cookie and the distribution of holes in the structure were in line with those of the non-sterilized liquid egg white (NSLE). Hence, adding 1% EWH was found to the optimum concentration, which provides good foaming performance and stability of SLE. This study conveys a positive assessment to SLE producers and potential users, as it will increase their profitability economically while meeting the market challenges.

Influence of foam mat drying on the nutritional and technological potential of fruits - a review

The consumption of fruits and vegetables is strongly encouraged in the nutritional recommendations presented in national and international guidelines, which strongly advise the intake of these elements as part of a healthy diet. However, this type of food matrix has a low post-harvest durability, making it necessary to apply techniques that extend its shelf life. Among the methods that can be applied, drying acts as a unitary operation of wide use, presenting low operational cost, ease of handling and wide variation of procedural techniques. However, it still remains a methodology seen as "critical" in the food sector, especially when the maximum focus of efforts is to obtain a material of high quality, nutritional and sensorial. In this context, foam layer drying has gained recognition as an effective and low-cost technique, where foam porosity and higher surface area-volume ratio provide high heat and mass transfer rates, reducing process time and improving the physical-chemical quality of the final product. We provide information capable of elucidating that drying requires a large amount of energy for the operation, and that many studies are still needed in order to optimize the process and guarantee the economic, nutritional and functional viability of the final product.

Spread Layers of Lysozyme Microgel at Liquid Surface

The spread layers of lysozyme (LYS) microgel particles were studied by surface dilational rheology, infrared reflection–absorption spectra, Brewster angle microscopy, atomic force microscopy, and scanning electron microscopy. It is shown that the properties of LYS microgel layers differ significantly from those of ß-lactoglobulin (BLG) microgel layers. In the latter case, the spread protein layer is mainly a monolayer, and the interactions between particles lead to the increase in the dynamic surface elasticity by up to 140 mN/m. In contrast, the dynamic elasticity of the LYS microgel layer does not exceed the values for pure protein layers. The compression isotherms also do not exhibit specific features of the layer collapse that are characteristic for the layers of BLG aggregates. LYS aggregates form trough three-dimensional clusters directly during the spreading process, and protein spherulites do not spread further along the interface. As a result, the liquid surface contains large, almost empty regions and some patches of high local concentration of the microgel particles.

Development of fish gelatin-chitooligosaccharide conjugates through the Maillard reaction for the encapsulation of curcumin

The poor water solubility, bioavailability and stability of bioactive compounds have become the bottleneck restricting their wide application, thus developing a functional carrier to realize the efficient encapsulation and activity improvement of active hydrophobic substances has become a research hotspot. In this work, a functional glycosylated fish gelatin (called FG-COS conjugates) carrier based on fish gelatin (FG) and chitooligosaccharide (COS) via Maillard reaction was developed. The functional carrier exhibited good antioxidant activity and high encapsulation of curcumin (Cur). Enhanced antioxidant effect of Cur loaded in FG-COS conjugates (called FG-COS-Cur nanoparticles) was achieved, showing remarkable UV protection on Cur and enhanced intracellular antioxidant activity of FG-COS-Cur nanoparticles. Remarkably, FG-COS-Cur nanoparticles increased the cell viability of H2O2-induced oxidative damage Caco-2 cells, drastically reduced the levels of reactive oxygen species (ROS) and lactate dehydrogenase (LDH), and significantly increased intracellular antioxidant enzyme activities, which all exhibited a dose-response relationship. These findings suggested that the FG-COS conjugates with intrinsic antioxidant activity could effectively encapsulate Cur and improved bioavailability for hydrophobic active molecules in functional food field.

Ultrafast Solar-Vapor Harvesting Based on a Hierarchical Porous Hydrogel with Wettability Contrast and Tailored Water States

Optimizing the water bonding network in an evaporator is significant for efficient solar-driven vapor generation (SVG). Herein, we report a facile one-pot method to regulate the hydrated structure and wettability in a hierarchical porous hydrogel. An ovalbumin (OVA)-polyacrylamide hydrogel foam was fabricated in a cake-making fashion. Because of the enrichment of amphiphilic OVA at the interface, the hydrophobic walls of the air pores in the foam provide vaporization sites and help reduce parasitic heat loss, while the hydrophilic skeleton with the secondary pores effectively pumps capillary water. Notably, the proportion of intermediate water in the foam reaches 87.6% with the melting point as low as -10 °C. All these features contribute to an exceptional evaporation rate of 3.4-4.5 kg m^-2 h^-1 under 1 sun and robust SVG performances at high-humidity, weak sunlight, or cold weathers. The strategy of using amphiphilic molecules to optimize the hydrated structures both at the interface and in bulk promises the reasonable design of SVG materials with superior efficiency and weather adaptability.

Improving foam performance using colloidal protein-polyphenol complexes: Lactoferrin and tannic acid

In this study, colloidal complexes were prepared from bovine lactoferrin (BLF) and tannic acid (TA) and then their ability to form and stabilize foams was characterized. The molecular interactions between BLF and TA were studied using fluorescence and molecular docking analysis, which suggested that hydrophobic forces were primarily involved in holding the complexes together. The production of colloidal BLF-TA complexes was supported by increases in turbidity and mean particle diameter, quenching of intrinsic fluorescence, decrease in surface hydrophobicity, and change in conformation. When used alone, BLF exhibited good foam formation but poor foam stability properties. In contrast, BLF-TA complexes exhibited good foam stability but poor foamability properties. The change in foaming properties of the proteins was closely related to their interactions with the polyphenols. These findings may be useful for the development of novel functional ingredients to construct food foams with good physicochemical and nutritional attributes.