Combination of aerosolized curcumin and UV-A light for the inactivation of bacteria on fresh produce surfaces

Curcumin-loaded mesoporous polydopamine nanoparticles modified by quaternized chitosan against bacterial infection through synergistic effect

Clinically, open wounds caused by accidental trauma and surgical lesion resection are easily infected by external bacteria, hindering wound healing. Antibacterial photodynamic therapy has become a promising treatment strategy for wound infection. In this study, a novel antibacterial nanocomposite material (QMC NPs) was synthesized by curcumin, quaternized chitosan and mesoporous polydopamine nanoparticles. The results showed that 150 μg/mL QMC NPs had good biocompatibility and exerted excellent antibacterial activity against Staphylococcus aureus and Escherichia coli after blue laser irradiation (450 nm, 1 W/cm2). In vivo, QMC NPs effectively treated bacterial infection and accelerated the healing of infected wounds in mice.

Antibacterial and Antibiofilm Effects of Photodynamic Treatment with Curcuma L. and Trans-Cinnamaldehyde against Listeria monocytogenes

Photodynamic inactivation (PDI) is a highly effective treatment that can eliminate harmful microorganisms in a variety of settings. This study explored the efficacy of a curcumin-rich extract, Curcuma L., (Cur)- and essential oil component, trans-cinnamaldehyde, (Ca)-mediated PDI against Listeria monocytogenes ATCC 15313 (Lm) including planktonic cells and established biofilms on silicone rubber (Si), polytetrafluoroethylene (PTFE), stainless steel 316 (SS), and polyethylene terephthalate (PET). Applying Ca- and Cur-mediated PDI resulted in planktonic cell reductions of 2.7 and 6.4 log CFU/cm2, respectively. Flow cytometric measurements (FCMs) coupled with CFDA/PI and TOTO®-1 staining evidenced that Ca- doubled and Cur-mediated PDI quadrupled the cell damage. Moreover, the enzymatic activity of Lm cells was considerably reduced by Cur-mediated PDI, indicating its superior efficacy. Photosensitization also affected Lm biofilms, but their reduction did not exceed 3.7 log CFU/cm2. Cur-mediated PDI effectively impaired cells on PET and PTFE, while Ca-mediated PDI caused no (TOTO®-1) or only slight (PI) cell damage, sparing the activity of cells. In turn, applying Ca-mediate PDI to Si largely diminished the enzymatic activity in Lm. SS contained 20% dead cells, suggesting that SS itself impacts Lm viability. In addition, the efficacy of Ca-mediated PDI was enhanced on the SS, leading to increased damage to the cells. The weakened viability of Lm on Si and SS could be linked to unfavorable interactions with the surfaces, resulting in a better effect of Ca against Lm. In conclusion, Cur demonstrated excellent photosensitizing properties against Lm in both planktonic and biofilm states. The efficacy of Ca was lower than that of Cur. However, Ca bears potent antibiofilm effects, which vary depending on the surface on which Lm resides. Therefore, this study may help identify more effective plant-based compounds to combat L. monocytogenes in an environmentally sustainable manner.

Carvacrol-loaded nanoemulsions produced with a natural emulsifier for lettuce sanitization

Carvacrol is an antimicrobial agent that shows potential for eliminating microorganisms in vegetables, increasing food safety. However, intense odor and low water solubility of carvacrol are limiting factors for its application for fresh vegetables sanitization, which can be overcome by nanotechnology. Two different nanoemulsions containing carvacrol (11 mg/mL) were developed by probe sonication: carvacrol-saponin nanoemulsion (CNS) and carvacrol-polysorbate 80 nanoemulsion (CNP). Formulations presented appropriate droplet sizes (from 74.7 nm to 168.2 nm) and high carvacrol encapsulation efficiency (EE) (from 89.5 % to 91.5 %). CNS showed adequate droplet size distribution (PDI < 0.22) and high zeta potential values (around -30 mV) compared to CNP, with saponin chosen for the following experiments. Carvacrol nanoemulsions presented Bacterial Inactivation Concentration (BIC) against the Salmonella cocktail from 5.51 to 0.69 mg/mL and for the E. coli cocktail from 1.84 to 0.69 mg/mL. Among all tested nanoemulsions, CNS1 presented the lowest BIC (0.69 mg/mL) against both bacterial cocktails. Damage to bacterial cells in lettuce treated with nanoemulsion was confirmed by scanning electron microscopy. For lettuce sanitization, CNS1 showed a similar effect to unencapsulated carvacrol, with a high bacterial reduction (>3 log CFU/g) after lettuce immersion for 15 min at 2 × BIC. Using the same immersion time, the CNS1 (2 × BIC) demonstrated equal or better efficacy in reducing both tested bacterial cocktails (>3 log CFU/g) when compared to acetic acid (6.25 mg/mL), citric acid (25 mg/mL), and sodium hypochlorite solution (150 ppm). Lettuce immersed in CNS1 at both concentrations (BIC and 2 × BIC) did not change the color and texture of leaves, while the unencapsulated carvacrol at 2 × BIC darkened them and reduced their firmness. Consequently, carvacrol-saponin nanoemulsion (CNS1) proved to be a potential sanitizer for lettuce.

Combining Blue Light and Yellow Curcumin to Obtain a "Green" Tool for Berry Preservation against Bacterial Contamination: A Preliminary Investigation

Background: According to recent studies, tens of millions of tons of fruit are wasted each year in Europe in primary production and home/service consumption. Among fruits, berries are most critical because they have a shorter shelf life and a softer, more delicate, and often edible skin. Curcumin is a natural polyphenolic compound extracted from the spice turmeric (Curcuma longa L.) which exhibits antioxidant, photophysical, and antimicrobial properties that can be further enhanced by photodynamic inactivation of pathogens when irradiated with blue or ultraviolet light. Materials and methods: Multiple experiments were performed in which berry samples were sprayed with a complex of β-cyclodextrin containing 0.5 or 1 mg/mL of curcumin. Photodynamic inactivation was induced by irradiation with blue LED light. Antimicrobial effectiveness was assessed with microbiological assays. The expected effects of oxidation, curcumin solution deterioration, and alteration of the volatile compounds were investigated as well. Results: The treatment with photoactivated curcumin solutions reduced the bacterial load (3.1 vs. 2.5 colony forming units/mL (UFC/ml) in the control and treated groups; p-value = 0.01), without altering the fruit organoleptic and antioxidant properties. Conclusions: The explored method is a promising approach to extend berries' shelf life in an easy and green way. However, further investigations of the preservation and general properties of treated berries are still needed.

Phototreatment (below 1100 nm) improving quality attributes of fresh-cut fruits and vegetables: A review

The emerging area of phototreatment technology has shown a significant potential to enhance the quality of fresh-cut fruit and vegetable products (FFVP). This review critically evaluates relevant literatures to address the potential for phototreatment technology (Red, blue, green, ultraviolet and pulsed light) applied to FFVP, outline the key to the success of phototreatment processing, and discuss the corresponding problems for phototreatment processing along with research and development needs. Base on photothermal, photophysical and photochemical process, phototreatment displays a great potential to maintain quality attributes of FFVP. The operating parameters of light, the surface properties and matrix components of the targeted material and the equipment design affect the quality of the fresh-cut products. To adapt current phototreatment technology to industrial FFVP processing, it is necessary to offset some limitations, especially control of harmful substances (For example, nitrite and furan) produced by phototreatment, comparison between different phototreatment technologies, and establishment of mathematical models/databases.

Influences of photosensitizer curcumin on microbial survival and physicochemical properties of chicken during storage

Curcumin is a natural plant derived antimicrobial, which was shown to inactivate or inhibit the growth of a broad spectrum of microorganisms through photodynamic inactivation. The purpose of the present study is to evaluate the influence of curcumin against commensal spoilage bacteria on chicken, foodborne pathogens, and the chicken skin pH and color. Chicken skin samples were immersed into water, photosensitizer curcumin (PSC), or peracetic acid (PAA). PSC samples were subsequently subjected to illumination by LEDs (430 nm). The PSC treatments did not inhibit the outgrowth of the four groups of spoilage bacteria evaluated. PSC treatment resulted in 2.9 and 1.5 log CFU/cm² reduction of L. monocytogenes and Salmonella, respectively. Over a 10-d period, population of Salmonella remained significantly lower on PSC treated samples compared to other treatments. PSC treatment resulted in no significant changes in pH or color as compared to water treated samples. This research suggests PSC effectively controlled pathogen outgrowth on chicken without negatively influencing quality; and may be suitable for use in commercial chicken processing.

Recent advances in essential oil complex coacervation by efficient physical field technology: A review of enhancing efficient and quality attributes

Although complex coacervation could improve the water solubility, thermal stability, bioavailability, antioxidant activity and antibacterial activity of essential oils (EOs). However, some wall materials (such as proteins and polysaccharides) with water solubility and hydrophobic nature limited their application in complex coacervation. In order to improve the properties of EO complex coacervates, some efficient physical field technology was proposed. This paper summarizes the application and functional properties of EOs in complex coacervates, formation and controlled-release mechanism, as well as functions of EO complex coacervates. In particular, efficient physical field technology as innovative technology, such as high pressure, ultrasound, cold plasma, pulsed electric fields, electrohydrodynamic atomization and microwave technology improved efficient and quality attributes of EO complex coacervates are reviewed. The physical fields could modify the gelling, structural, textural, emulsifying, rheological properties, solubility of wall material (proteins and polysaccharides), which improve the properties of EO complex coacervates. Overall, EOs complex coacervates possess great potential to be used in the food industry, including high bioavailability, excellent antioxidant capacity and gut microbiota in vivo, masking the sensation of off-taste or flavor, favorable antimicrobial capacity.

Microchip coupled with MALDI-TOF MS for the investigation of bacterial contamination of fish muscle products

Bacterial contamination is a significant concern in food safety. Traditional methods, though being a gold standard for bacterial detection, are time-consuming. In this work, we managed to establish a simple and versatile magnetic-assisted microfluidic method for rapid bacterial detection of fish muscle products, by manipulating anti-human IgG functionalized magnetic beads in a zig-zag shaped microfluidic channel, increasing the probability for bacteria capture. The captured bacteria were characterized by matrix-assisted laser desorption ionization time-of-flight mass spectrometry (MALDI-TOF MS). This method is capable of isolating Escherichia coli, Staphylococcus aureus and Klebsiella pneumoniae from 5 μL of sablefish sarcoplasmic protein sample, and detecting Escherichia coli in the range of 6.0 to 6.0×10⁴ CFU/mL with a detection limit of 6 CFU/mL. Bacterial growth on salmon sashimi during its period of storage was successfully monitored. The current protocol holds great potential for pathogen detection and microbial control in the food industry.

Capture and identification of bacteria from fish muscle based on immunomagnetic beads and MALDI-TOF MS

•

A protocol for the bacterial analysis in fish muscle was developed.

•

Anti-bacterial antibodies modified magnetic beads (MBs) were used to capture bacteria.

•

The bacterial identification accuracy from different complex food matrices was good.

•

The presence of 10 CFU/mL E. coli is still detectable.

•

It is promising to be applied in bacterial analysis to ensure muscle food safety.

In the present study, E. coli was taken as a model bacterium, anti-E. coli functionalized magnetic beads were constructed and used to capture E. coli from aqueous extracts of fish sarcoplasmic protein (FSP) and fish muscle protein of sablefish. The excellency of the reproducibility of the present protocol was demonstrated by capturing E. coli from sablefish FSP extracts. The presence of 10 CFU/mL E. coli is still detectable. A microbial safety test on the surface of fish muscle was successfully performed. The bacterial identification accuracy from samples with different matrices was found to be excellent with RSD = 3%. High specific detection of target bacteria in complex biological samples was testified by spiking Staphylococcus aureus and Klebsiella pneumoniae in samples as interference. Ten biomarker ions were discovered for E. coli’s recognition. It is promising to apply the present protocol in bacterial analysis in muscle food samples to ensure their safety.

Effects of aerosolized citric acid-radio frequency as a pretreatment on hot-air drying characteristics of banana

The effects of aerosolized citric acid-radio frequency (RF) pretreatment were evaluated on the quality characteristics of hot air-dried banana. The results showed that increasing the RF intensity elevated the total phenolic content (TPC), shrinkage, and color changes, while the TPC and color changes decreased with increasing the RF exposure duration. A rise in the RF intensity reduced the rehydration ratio (RR) and firmness of the samples. Aerosolization of citric acid rendered the preservation of the phenolic compounds of the samples to a higher extent, and TPC decreased from 311 ± 3.4 mg/g in fresh banana to 252.1 ± 4.24 mg/g in the samples treated with a RF of 27.12 Hz for 40 min, 280.5 ± 8.1 mg/g in the ones treated with 1% aerosolized citric acid for 40 min, and 162.5 ± 10.8 mg/g in the ones with no pretreatment. According to scanning electron microscopy (SEM), the application of aerosolized citric acid pretreatment caused tissue softening and the formation of cell holes in the samples. Cell wall collapse and damage were severe when RF was in use, which caused the blockage of some microchannels within the tissue. The Page model with the highest determination coefficient (R 2) and the lowest root-mean-squared error (RMSE) and chi-square (χ 2) was selected as the best model.

Photodynamic inactivation and its application in food preservation

Food incidents caused by various foodborne pathogenic bacteria are posing a major threat to human health. The traditional thermal and chemical-based procedures applied for microbial control in the food industry cause adverse effects on food quality and bacterial resistance. As a new means of innovative sterilization technology, photodynamic inactivation (PDI) has gained significant attention due to excellent sterilization effect, environmental friendliness, safety, and low cost. This review analyses new developments in recent years for PDI systems applied to the food preservation. The fundamentals of photosensitization mechanism, the development of photosensitizers and light source selection are discussed. The application of PDI in food preservation are presented, with the main emphasis on the natural photosensitizers and its application to inactivate in vitro and in vivo microorganisms in food matrixes such as fresh vegetable, fruits, seafood, and poultry. The challenges and future research directions facing the application of this technology to food systems have been proposed. This review will provide reference for combating microbial contamination in food industry.

Use of Micellar Delivery Systems to Enhance Curcumin's Stability and Microbial Photoinactivation Capacity

Microbial photoinactivation using ultraviolet (UV) or visible light can be enhanced by photosensitizers. This study assessed the efficacy of encapsulating a food-grade photosensitizer (curcumin) in surfactant micelles on its water dispersibility, chemical stability, and antimicrobial activity. Stock curcumin-surfactant solutions were prepared with Surfynol 465 (S465) or Tween 80 (T80) (5 mM sodium citrate buffer). The antimicrobial activity of curcumin-loaded surfactant solutions was determined by monitoring the inactivation of Escherichia coli O157: H7 and Listeria innocua after 5-min irradiation with UV-A light (λ = 365 nm). The solutions mixed with the bacterial suspensions contained 1 µM curcumin and each surfactant below, near, and above their critical micelle concentrations (CMCs). The addition of surfactants at any level to the curcumin solution enhanced its dispersibility, stability, and efficacy as a photosensitizer, thereby enhancing its antimicrobial activity. Gram-positive bacteria were more susceptible than Gram-negative bacteria when curcumin-loaded micelles were used against them. The photoinactivation efficacy of curcumin-surfactant solutions depended on the pH of the solution (low > high), surfactant type (S465 > T80), and the amount of surfactant present (below CMC ≥ near CMC > above CMC = unencapsulated curcumin). This result suggests that excessive partitioning of curcumin into micelles reduced its ability to interact with microbial cells. Synergistic antimicrobial activity was observed when S465 was present below or near the CMC with curcumin at pH 3.5, which could be attributed to a more effective interaction of the photosensitizer with the cell membranes as supported by the fluorescence lifetime micrographs. The use of a micelle-based delivery system facilitates adsorption and generation of reactive oxygen species in the immediate environment of the microbial cell, enhancing photoinactivation.

Synergistic Inactivation of Bacteria Using a Combination of Erythorbyl Laurate and UV Type-A Light Treatment

This study evaluated the synergistic antimicrobial activity of erythorbyl laurate (EL) and UV type-A (UVA). To investigate the mode of synergism, changes in gene expression and bacterial inactivation activity were examined. Individual treatments with EL (10 mM) or UVA caused a 1.9- or 0.5-log CFU/ml reduction respectively, whereas EL/UVA co-treatment resulted in a 5.5-log CFU/ml reduction in Escherichia coli viable cell numbers. Similarly, treatment with either EL (2 mM) or UVA for 30 min resulted in a 2.8- or 0.1-log CFU/ml reduction in Listeria innocua, respectively, whereas combined treatment with both EL and UVA resulted in a 5.4-log CFU/ml reduction. Measurements of gene expression levels showed that EL and UVA treatment synergistically altered the gene expression of genes related to bacterial membrane synthesis/stress response. However, addition of 10–50-fold excess concentration of exogenous antioxidant compared to EL reduced the synergistic effect of EL and UVA by approximately 1 log. In summary, the results illustrate that synergistic combination of EL and UVA enhanced membrane damage independent of the oxidative stress damage induced by UVA and thus illustrate a novel photo-activated synergistic antimicrobial approach for the inactivation of both the Gram-positive and Gram-negative bacteria. Overall, this study illustrates mechanistic evaluation of a novel photochemical approach for food and environmental applications.

Effect of photodynamic treatments on quality and antioxidant properties of fresh-cut potatoes

This study evaluated the feasibility of curcumin based photodynamic sterilization technology (PDT) applied to fresh-cut potato slices. Potato samples with 30 μmol L^-1 curcumin solution were exposed to 420 nm light emitting diodes (LED) at a total dose of 0.7 kJ cm^-2. Results showed that PDT inactivated 2.43 log CFU mL^-1 of Escherichia coli (BL 21) and 3.18 log CFU mL^-1 of Staphylococcus aureus and maintained the color, texture, weight as well as total solid content of treated potatoes. Additionally, loss of phenols and flavonoids was significantly prevented, increasing the total antioxidant capacity. This was attributed to changes in enzyme activity that PDT decreased the activity of polyphenol oxidase (PPO) and peroxidase (POD) by 59.7% and 47.8% and increased the activity of phenylalanine ammonia-lyase (PAL). Therefore, curcumin-based PDT has the potential to maintain the commercial quality of producing and achieving microbiological safety.

The application of polyphenols in food preservation

Polyphenols are a kind of complex secondary metabolites in nature, widely exist in the flowers, bark, roots, stems, leaves, and fruits of plants. Numerous studies have shown that plant-derived polyphenols have a variety of bioactivities due to their unique chemical structure, such as antioxidant, antimicrobial, and prevention of chronic diseases, cardiovascular disease, cancer, osteoporosis, and neurodegeneration. With the gradual rise of natural product development, plant polyphenols have gradually become one of the research hotspots in the field of food science due to their wide distribution in the plants, and the diversity of physiological functions. Owing to the extraordinary antioxidant and antibacterial activity of polyphenols, plant-derived polyphenols offer an alternative to chemical additives used in the food industry, such as oil, seafood, meat, beverages, and food package materials. Based on this, this chapter provides an overview of the potential antioxidant and antibacterial mechanisms of plant polyphenols and their application in food preservation, it would be providing a reference for the future development of polyphenols in the food industry.

Screening of antimicrobial synergism between phenolic acids derivatives and UV-A light radiation

The objective of this study was to investigate synergistic antibacterial activity based on a combination of UV-A light and three classes of food grade compounds: benzoic acid derivatives, cinnamic acid derivatives, and gallates. By using Escherichia coli O157:H7 as the model strain, it was observed that three cinnamic acid derivatives (ferulic acid, coumaric acid, and caffeic acid) and one benzoic acid derivative (2,5-dihydroxybenzoic acid) presented strong synergistic antibacterial activity with UV-A light radiation, where 1 mM levels of these compounds plus with 15 min of UV-A light (total light dose of 6.1 cm^-2) led to more than 7-log CFU mL^-1 of bacterial inactivation. In contrast, synergistic antibacterial activity between UV-A light and most benzoic acid derivatives (benzoic acid, gallic acid, vanillic acid, and 2,5-dimethoxybenzoic acid) were only observed after higher concentrations of these compounds were applied (10 mM). Lastly, from the three gallates tested (methyl gallate, ethyl gallate, and propyl gallate), only propyl gallate showed strong antibacterial synergism with UV-A light, where 10 mM of propyl gallate plus 15 min of UV-A light led to approximately 6.5-log of bacterial reduction. Presence of antioxidant compounds mitigated the light-mediated antibacterial activity of gallic acid, 2,5-dihydroxybenzoic acid, and propyl gallate. Similarly, the light-mediated antibacterial activity of these compounds was significantly (P < 0.05) reduced against metabolic-inhibited bacterial cells (sodium azide pretreatment). On the other hand, the antibacterial synergism between ferulic acid and UV-A light was not affected by the presence of antioxidants or the metabolic state of the bacterial cells. Due to the increasing concerns of antimicrobial resistant (AMR) pathogens, the study also investigated the proposed synergistic treatment on AMR Salmonella. Combinations of 1 mM of ferulic acid or 1 mM of 2,5-dihydroxybenzoic acid with UV-A light radiation was able to inactivate more than 6-log of a multi-drug resistant Salmonella Typhimurium strain.

pH interferes in photoinhibitory activity of curcumin nanoencapsulated with pluronic® P123 against Staphylococcus aureus

Microbial contamination control is a public health concern and challenge for the food industry. Antimicrobial technologies employing natural agents may be useful in the food industry for these purposes. This work aimed to investigate the effect of photodynamic inactivation using curcumin in Pluronic® P123 nanoparticles (Cur/P123) at different pH and blue LED light against Staphylococcus aureus. Bacterial photoinactivation was conducted using different photosensitizer concentrations and exposure times at pH 5.0, 7.2 and 9.0. A mixture design was applied to evaluate the effects of exposure time (dark and light incubation) on the photoinhibitory effect. S. aureus was completely inactivated at pH 5.0 by combining low concentrations of Cur/P123 (7.80-30.25 μmol/L) and light doses (6.50-37.74 J/cm²). According to the mathematical model, dark incubation had low significance in bacterial inactivation at pH 5.0 and 9.0. No effect in bacterial inactivation was observed at pH 7.2. Cur/P123 with blue LED was effective in inactivating S. aureus. The antimicrobial effect of photodynamic inactivation was also pH-dependent.

Antimicrobial photodynamic efficacy of selected natural photosensitizers against food pathogens: Impacts and interrelationship of process parameters

Photodynamic treatment (PDT) could be a viable option to decontaminate food or food contact surfaces. Such applications require a rigorous method to assess the efficacy of different photosensitizer-light source systems. It is also essential to determine suitable treatment conditions to achieve desirable microbial inhibition for a given process. In this connection, we evaluated and compared the antimicrobial activity of two natural photosensitizers (aloe emodin, curcumin) under PDT based on the number of absorbed photons. The degree of bacterial inactivation was then correlated to the absorbed photons as well as the process parameters through kinetics study. The results showed that aloe emodin was more effective than curcumin against both S. aureus and E. coli when the number of absorbed photons was matched. Aloe emodin reduced about 2.3 log units of S. aureus and 1.1 log units of E. coli more than curcumin. E. coli was more resistant to PDT than S. aureus. Inactivation kinetics of S. aureus and E. coli as a function of the number of absorbed photons can be described by the Weibull model with D values of 1.296 × 10¹⁷ photons/cm² and 2.446 × 10¹⁸ photons/cm², R² of 0.969 and 0.968, respectively. The interrelationship between the concentration of photosensitizer, radiant fluence, and degree of bacterial inactivation could be used to determine and optimize treatment conditions of PDT processes.

Inactivation of Aeromonas hydrophila and Vibrio parahaemolyticus by Curcumin-Mediated Photosensitization and Nanobubble-Ultrasonication Approaches

The antimicrobial efficacy of novel photodynamic inactivation and nanobubble technologies was evaluated against Vibrio parahaemolyticus and Aeromonas hydrophila as two important aquatic microbial pathogens. Photodynamic inactivation results showed that LED (470 nm) and UV-A (400 nm)-activated curcumin caused a complete reduction in V. parahaemolyticus at 4 and 22 °C, and a greater than 2 log cfu/mL reduction in A. hydrophila, which was curcumin concentration-dependent (p < 0.05). Furthermore, the photodynamic approach caused a greater than 6 log cfu/mL V. parahaemolyticus reduction and more than 4 log cfu/mL of A. hydrophila reduction in aquaponic water samples (p < 0.05). Our results with the nanobubble technology showed that the nanobubbles alone did not significantly reduce bacteria (p > 0.05). However, a greater than 6 log cfu/mL A. hydrophila reduction and a greater than 3 log cfu/mL of V. parahaemolyticus reduction were achieved when nanobubble technology was combined with ultrasound (p < 0.05). The findings described in this study illustrate the potential of applying photodynamic inactivation and nanobubble-ultrasound antimicrobial approaches as alternative novel methods for inactivating fish and shellfish pathogens.

Inactivation of foodborne pathogens by the synergistic combinations of food processing technologies and food-grade compounds

There is a need to develop food processing technologies with enhanced antimicrobial capacity against foodborne pathogens. While considering the challenges of adequate inactivation of pathogenic microorganisms in different food matrices, the emerging technologies are also expected to be sustainable and have a minimum impact on food quality and nutrients. Synergistic combinations of food processing technologies and food-grade compounds have a great potential to address these needs. During these combined treatments, food processes directly or indirectly interact with added chemicals, intensifying the overall antimicrobial effect. This review provides an overview of the combinations of different thermal or nonthermal processes with a variety of food-grade compounds that show synergistic antimicrobial effect against pathogenic microorganisms in foods and model systems. Further, we summarize the underlying mechanisms for representative combined treatments that are responsible for the enhanced microbial inactivation. Finally, regulatory issues and challenges for further development and technical transfer of these new approaches at the industrial level are also discussed.

An insight into curcumin-based photosensitization as a promising and green food preservation technology

Consumer awareness on the side effects of chemical preservatives has increased the demand for natural preservation technologies. An efficient and sustainable alternative to current conventional preservation techniques should guarantee food safety and retain its quality with minimal side effects. Photosensitization, utilizing light and a natural photosensitizer, has been postulated as a viable and green alternative to the current conventional preservation techniques. The potential of curcumin as a natural photosensitizer is reviewed in this paper as a practical guide to develop a safe and effective decontamination tool for industrial use. The fundamentals of the photosensitization mechanism are discussed, with the main emphasis on the natural photosensitizer, curcumin, and its application to inactivate microorganisms as well as to enhance the shelf life of foods. Photosensitization has shown promising results in inactivating a wide spectrum of microorganisms with no reported microbial resistance due to its particular lethal mode of targeting nucleic acids. Curcumin as a natural photosensitizer has recently been investigated and demonstrated efficacy in decontamination and delaying spoilage. Moreover, studies have shown the beneficial impact of an appropriate encapsulation technique to enhance the cellular uptake of photosensitizers, and therefore, the phototoxicity. Further studies relating to improved delivery of natural photosensitizers with inherent poor solubility should be conducted. Also, detailed studies on various food products are warranted to better understand the impact of encapsulation on curcumin photophysical properties, photo-driven release mechanism, and nutritional and organoleptic properties of treated foods.

Antimicrobial polyphenol-rich extracts: Applications and limitations in the food industry

One of the common ways to prevent food spoilage throughout product's shelf life is by using artificial/synthetic preservatives. However, the growing negative perception of consumers over synthetic preservatives has encouraged the food industry to consider their natural alternatives. Plant extracts, increasingly recognized as consumer-friendly, represent a valuable source of active compounds, mostly polyphenols, with potent antimicrobial and antibiofilm activities. Hence, this article focuses mainly on the antimicrobial activity of plant-based polyphenol-rich extracts as well as on their potential use and limitations in the food industry. Some new trends such as antimicrobial food packaging combined with plant extracts and photodynamic inactivation (PDI) combined with a natural photosensitiser, curcumin, are discussed as well.

Sono-photodynamic inactivation of Escherichia coli and Staphylococcus aureus in orange juice

Efficiency of blue (462 ± 3 nm) light emitting diode (LED) illumination to inactivate Escherichia coli and Staphylococcus aureus in the presence of exogenous photosensitizer (curcumin) was studied in freshly squeezed orange juice. Further, the combinational effect of ultrasound (US), photosensitizer (PS) and blue light (BL) on inactivation of microbes was evaluated. The effect of process parameters such as concentration of PS, US and volume of the juice on E. coli and S. aureus inactivation was also investigated. The US alone and PS + BL treatments resulted in 3.02 ± 0.52 and 1.06 ± 0.13 log reduction of E. coli; 0.18 ± 0.14 and 2.34 ± 0.13 log reduction of S. aureus, respectively. The combination of PS + US + BL treatment at optimized conditions resulted in 2.35 ± 0.16 log reduction of S. aureus. An additive effect on the inactivation of E. coli (4.26 ± 0.32 log reduction) was observed with PS + US + BL combination treatment. The US treatment showed significant change in cloud value, colour and browning index of orange juice. The combinational non-thermal processes (PS + BL and PS + US + BL) did not have any significant effect on total phenolic content, total flavonoid content, and hesperidin content of the orange juice. However, these processes affected ascorbic acid content and antioxidant activity negatively. Thus, this study indicated that photodynamic inactivation of E. coli and S. aureus using LED-based photosensitization in fruit juices could be a potential method for microbial inactivation. Nevertheless, the effect on quality parameters needs to be considered while optimizing the process.

How protoporphyrinogen IX oxidase inhibitors and transgenesis contribute to elucidate plant tetrapyrrole pathway

Several families of herbicides, especially diphenyl ether (DPE) and pyrimidinedione, target the plant tetrapyrrole biosynthesis pathways and in particular one key enzyme, protoporphyrinogen IX oxidase (PPO). When plants are treated with DPE or pyrimidinedione, an accumulation of protoporphyrin IX, the first photosensitizer of this pathway, is observed in cytosol where it becomes very deleterious under light. Indeed these herbicides trigger plant death in two distinct ways: (i) inhibition of chlorophylls and heme syntheses and (ii) a huge accumulation of protoporphyrin IX in cytosol. Recently, a strategy based on plant transgenesis that induces deregulation of the tetrapyrrole pathway by up- or down-regulation of genes encoding enzymes, such as glutamyl-[Formula: see text]RNA reductase, porphobilinogen deaminase and PPO, has been developed. Against all expectations, only transgenic crops overexpressing PPO showed resistance to DPE and pyrimidinedione. This herbicide resistance of transgenic crops leads to the hypothesis that the overall consumption of herbicides will be reduced as previously reported for glyphosate-resistant transgenic crops. In this review, after a rapid presentation of plant tetrapyrrole biosynthesis, we show how only PPO enzyme can be the target of DPE and how transgenic crops can be further resistant not only to herbicide but also to abiotic stress such as drought or chilling. Keeping in mind that this approach is mostly prohibited in Europe, we attempt to discuss it to interest the scientific community, from plant physiologists to chemists, who work on the interface of photosensitizer optimization and agriculture.