Assessment and mitigation of DNA loss utilizing centrifugal filtration devices

Salmon sperm DNA increases sample recovery from cotton swabs

Forensic samples with low DNA template amounts are difficult to analyze and interpret. There is a large body of research demonstrating that adding carrier nucleic acid to storage tubes, solid phase extractions, or filtering devices can improve yields of target DNA. However, the addition of carrier nucleic acid to sampling substrates, like cotton swabs, has not yet been attempted. In this proof-of-concept study, carrier nucleic acids in the form of either Poly (A) RNA or salmon sperm DNA were spotted onto cotton swabs, followed by human genomic DNA, to determine if introducing the carrier prior to sample collection would increase recovery from the swabs post-extraction. Extracts were also evaluated to determine whether adding the carrier nucleic acids to human DNA would interfere with downstream forensic DNA analysis processes such as real-time PCR quantitation, PCR amplification of STR loci, or capillary electrophoresis. The RNA carrier did not improve human sample recovery from cotton swabs. The extraction efficiency of human DNA from cotton swabs was increased when the DNA carrier was applied to the swabs prior to sample deposition, and the scale of the increase depended on the amount of carrier DNA used. When applying the salmon sperm DNA carrier to cotton swabs, with each increase from no carrier to 0.001-1-10 µg, human DNA recovery went from ∼29 % to ∼50 % to ∼75 % to ∼100 %. Additionally, no inhibitory effects from the carrier DNA were observed post-extraction with quantitation or in the DNA profile after amplification. Therefore, salmon sperm DNA carrier will increase human DNA yield from cotton swabs without negative effects on downstream forensic DNA profiling methods, with the optimal carrier amount being 10 µg.

Comparison Analysis of Different DNA Extraction Methods on Suitability for Long-Read Metagenomic Nanopore Sequencing

Metagenomic next-generation sequencing (mNGS) is a novel useful strategy that is increasingly used for pathogens detection in clinic. Some emerging mNGS technologies with long-read ability are useful to decrease sequencing time and increase diagnosed accuracy, which is of great significance in rapid pathogen diagnosis. Reliable DNA extraction is considered critical for the success of sequencing; hence, there is thus an urgent need of gentle DNA extraction method to get unbiased and more integrate DNA from all kinds of pathogens. In this study, we systematically compared three DNA extraction methods (enzymatic cell lysis based on MetaPolyzyme, mechanical cell lysis based on bead beating, and the control method without pre-cell lysis, respectively) by assessing DNA yield, integrity, and the microbial diversity based on long-read nanopore sequencing of urine samples with microbial infections. Compared with the control method, the enzymatic-based method increased the average length of microbial reads by a median of 2.1-fold [Inter Quartile Range (IQR), 1.7-2.5; maximum, 4.8) in 18 of the 20 samples and the mapped reads proportion of specific species by a median of 11.8-fold (Inter Quartile Range (IQR), 6.9-32.2; maximum, 79.27]. Moreover, it provided fully (20 of 20) consistent diagnosed results to the clinical culture and more representative microbial profiles (P < 0.05), which all strongly proves the excellent performance of enzymatic-based method in long-read mNGS-based pathogen identification and potential diseases diagnosis of microbiome related.

Review of direct PCR and Rapid DNA approaches to streamline sexual assault kit testing

Crime laboratories have been faced with large casework backlogs due to lengthy processing times, limited resources and scientists, and rising crime rates. Evidence related to sexual assault crimes, specifically sexual assault kits (SAKs), heavily contribute to the reported backlogs. Although more sensitive, faster chemistries and automated techniques have been implemented over the years, the traditional STR workflow remains relatively unchanged. Enhanced workflows such as direct PCR and Rapid DNA have the potential to streamline the processing of forensic evidence items including those commonly submitted in SAKs, but the FBI QAS guidelines restrict CODIS-approved labs from implementing these methods for forensic samples. Recent studies have shown decreased turnaround times and improved or comparable profiling success with both approaches. However, review of the literature shows a lack of in-depth research comparing traditional DNA workflows to faster and more sensitive direct PCR and/or Rapid DNA approaches for evidentiary samples, especially for SAKs. By providing the forensic science and criminal justice communities with the strengths and limitations of direct PCR and Rapid DNA methods, stakeholders and policy makers may be better informed.

Establishing an integrated pipeline for automatic and efficient detection of trace DNA encountered in forensic applications

The analysis of trace DNA is a crucial component in forensic applications. Biological materials containing low-level DNA collected at crime scenes, such as fingerprints, can be valuable as evidence. Automatic detection of biological samples has been largely embraced in forensic applications to meet the increasing throughput requirements. However, the amount of DNA automatically retrieved from trace evidence often tends to be small and unstable, ultimately resulting in poor detection of DNA profiles. Thus, in this work, we introduced a robust DNA extraction and purification platform named Bionewtech® BN3200 (Bionewtech®, Shanghai, China) with the goal of constructing a rapid automatic detection system for trace DNA. The establishment of automatic detection system for trace DNA mainly encompassed two parts: assessing the sensitivity of automatic extraction platform and screening the optimal short tandem repeat (STR) typing kit. The sensitivity of Bionewtech® BN3200 platform based on Ultra-sensitive DNA Extraction kit was initially estimated, demonstrating that this extraction platform might contain large potential in the trace DNA extraction. For the amplification part, three sets of commercial multiplex STR typing kits were selected as candidates, and the amplified products were further genotyped on the Applied Biosystems 3500xl Genetic Analyzer. After comparation, SiFa™ 23 Plex Kit was determined as the most suitable amplification system for trace DNA. Eventually, the newly exploited trace DNA detection system was successfully implemented in the detection of fingerprints derived from glass surfaces with the five-seconds contact time. As a result, the DNA recovered from the fingerprints fluctuated approximately from 57.60 pg to 18.05 ng, in addition, over 70% of the total STR loci were detected in 75% of the fingerprint samples.

Cryoconcentration by Centrifugation–Filtration: A Simultaneous, Efficient and Innovative Method to Increase Thermosensitive Bioactive Compounds of Aqueous Maqui (Aristotelia chilensis (Mol.) Stuntz) Extract

Maqui (Aristotelia chilensis (Mol.) Stuntz) is a Chilean berry rich in antioxidants, which are mostly found in the pulp and skin of the fruit. The objective was to evaluate the cryoconcentration process by centrifugation–filtration as a simultaneous, efficient, and innovative method to increase the content of thermosensitive bioactive compounds of aqueous maqui extract. Cryoconcentration separated the concentrated solute from the aqueous maqui extract with an efficiency of more than 95%; it increased the content of total polyphenols and total anthocyanins and antioxidant capacity by 280%, 573%, and 226%, respectively. Although the concentrates obtained by evaporation at 50, 70, and 80 °C increased the content of bioactive compounds, they did so in a lower percentage than the cryoconcentrate. Furthermore, cyanidin 3,5-diglucoside was degraded at 70 and 80 °C. In conclusion, cryoconcentration by centrifugation–filtration as a simultaneous process efficiently separates the solutes from the frozen matrix of aqueous maqui extract, and it maintains and increases the contents of polyphenols and anthocyanins and antioxidant capacity. This method is recommended for concentrating natural berry extracts with thermosensitive compounds.

Characterization of Biological Material Adsorption to the Surface of Nanoparticles without a Prior Separation Step: a Case Study of Glioblastoma-Targeting Peptide and Lipid Nanocapsules

Purpose

Current preclinical therapeutic strategies involving nanomedicine require increasingly sophisticated nanosystems and the characterization of the complexity of such nanoassemblies is becoming a major issue. Accurate characterization is often the factor that can accelerate the translational approaches of nanomedicines and their pharmaceutical development to reach the clinic faster. We conducted a case study involving the adsorption of the NFL-TBS.40–63 (NFL) peptide (derived from neurofilaments) to the surface of lipid nanocapsules (LNCs) (a combined nanosystem used to target glioblastoma cells) to develop an analytical approach combining the separation and the quantification in a single step, leading to the characterization of the proportion of free peptide and thus the proportion of peptide adsorbed to the lipid nanocapsule surface.

Methods

LNC suspensions, NFL peptide solution and LNC/NFL peptide mixtures were characterized using a Size-Exclusion Chromatography method (with a chromatographic apparatus). In addition, this method was compared to centrifugal-filtration devices, currently used in literature for this case study.

Results

Combining the steps for separation and characterization in one single sequence improved the accuracy and robustness of the data and led to reproducible results. Moreover the data deviation observed for the centrifugal-filtration devices demonstrated the limits for this increasingly used characterization approach, explained by the poor separation quality and highlighting the importance for the method optimization. The high potential of the technique was shown, proving that H-bond and/or electrostatic interactions mediate adsorption of the NFL peptide to the surface of LNCs.

Conclusions

Used only as a characterization tool, the process using chromatographic apparatus is less time and solvent consuming than classical Size-Exclusion Chromatography columns only used for separation. It could be a promising tool for the scientific community for characterizing the interactions of other combinations of nanosystems and active biological agents.

Graphical abstract

Supplementary Information

The online version contains supplementary material available at 10.1007/s11095-021-03034-8.

Direct PCR amplification from saliva sample using non-direct multiplex STR kits for forensic DNA typing

Due to its proficiency to provide the most discriminating results for forensic applications, medical research and anthropological studies, multiplex PCR based STR analysis has been established as the most efficient technique in the forensic DNA analysis. Several multiplex amplification kits based on 4, 5 and 6 dyes chemistry are commercially available and used in forensic DNA typing across the globe. These multiplex PCR systems are routinely used for amplification of multiple STR loci (Autosomal, Y and/or X STR's) in the DNA extracted from various biological samples. In the routine forensic DNA testing, DNA profile obtained is compared with the DNA profile of the reference sample, which takes a certain turnaround time and employs costly lab resources. Successive development in forensic DNA typing have resulted in advent of improved multiplex kits which have reduced the effective analysis time, cost and minimized the number of steps required in comparison to conventional forensic DNA typing. Specialized direct amplification compatible multiplex kits are also available nowadays. These kits are relatively costlier but still require few pre-processing steps, which does not make them worth the hefty cost. Herein, this study, we have used non-direct multiplex STR kits to assess their efficacy for direct amplification. In the present study, 103 saliva samples were directly amplified without any pre-treatment of the samples using thirteen non-direct multiplex kits (4 dyes, 5 dyes and 6 dyes chemistry based) for forensic DNA typing. Here, we report a validated direct PCR amplification protocol from the reference saliva samples by omitting DNA extraction and quantification steps, which resulted in 80% reduction of the turnaround time. The developed protocol is cost effective, time efficient and it does not compromise with the quality of DNA profiles. To the best of our knowledge, this is the first report for direct amplification of DNA with the most commonly used non-direct multiplex STR kits without any pre-treatment of the sample. Complete DNA profiles matching all the essential quality parameters were obtained successfully from all the tested samples.

Methods for ensuring the highest DNA concentration and yield in future and retrospective trace DNA extracts

In forensic laboratories, increased extraction efficiency of trace evidence is paramount because analytical success is intrinsically dependent on the quantity of DNA recovered. Moreover, highly concentrated nucleic acids are vital for effective downstream analysis and high quality results. This study investigated the efficiency of extraction with the Qiagen® QIAamp® DNA Investigator kit, and explored improvements to the methodology that would maximise the recovery of low concentration forensic samples. Controlled amounts of starting cellular material were used to mimic trace (or low level) DNA deposits prior to DNA extraction with the Investigator kit. Addition of the provided carrier RNA along with conducting two successive elutions of 50 µL improved the net recovery of DNA to 95%. Concentration with centrifugal filters post-extraction were able to concentrate DNA but a large net loss was observed. For the concentration of historic, retrospectively extracted DNA, centrifugal methods are able to concentrate DNA extracts previously too dilute for analysis. These concentrated volumes, however are small, allowing for minimal downstream analysis attempts before the sample is exhausted.

Cost-effective straightforward method for captured whole mitogenome sequencing of ancient DNA

Working with mitochondrial DNA from highly degraded samples is challenging. We present a whole mitogenome Illumina-based sequencing method suitable for highly degraded samples. The method makes use of double-stranded library preparation with hybridization-based target enrichment. The aim of the study was to implement a new user-friendly method for analysing many ancient DNA samples at low cost. The method combines the Swift 2S™ Turbo library preparation kit and xGen® panel for mitogenome enrichment. Swift allows to use low input of aDNA and own adapters and primers, handles inhibitors well, and has only two purification steps. xGen is straightforward to use and is able to leverage already pooled libraries. Given the ancient DNA is more challenging to work with, the protocol was developed with several improvements, especially multiplying DNA input in case of low concentration DNA extractions followed by AMPure® beads size selection and real-time pre-capture PCR monitoring in order to avoid cycle-optimization step. Nine out of eleven analysed samples successfully retrieved mitogenomes. Hence, our method provides an effective analysis of whole mtDNA, and has proven to be fast, cost-effective, straightforward, with utilisation in population-wide research of burial sites.

Determination of materials present in skeletonized human remains and the associated DNA: Development of a GC/MS protocol

DNA testing of skeletonized human remains is considered to be challenging, especially when the remains have been exposed to inhibitory materials during decomposition. Inhibitors affect the processing of DNA, either by preventing efficient extraction or interfering with down-stream PCR-based processes. Limited studies have been performed on real-world samples that have been exposed to such inhibitors. This paper presents the development of a gas chromatography/mass spectrometry (GC/MS) protocol for the evaluation of materials present in skeletonized human remains recovered from the field, as well as the DNA extracted from the same materials. Twenty-one bone samples and seventeen DNA extracts were evaluated across three solvents and multiple GC/MS parameters to determine the optimal conditions for the recovery of trace materials present. The aim of this work is to provide a technique that can determine the presence of inhibitors prior to DNA extraction, allowing analysts to optimize removal of inhibitory materials.

Optical characterization of epidermal cells and their relationship to DNA recovery from touch samples

The goal of this study was to investigate the relative contributions of different cellular and genetic components to biological samples created by touch or contact with a surface - one of the most challenging forms of forensic evidence. Touch samples were generated by having individuals hold an object for five minutes and analyzed for quantity of intact epidermal cells, extracellular DNA, and DNA from pelleted cell material after elution from the collection swab. Comparisons were made between samples where individuals had washed their hands immediately prior to handling and those where hand washing was not controlled. The vast majority (84-100%) of DNA detected in these touch samples was extracellular and was uncorrelated to the number of epidermal cells detected. Although little to no extracellular or cell pellet-associated DNA was detected when individuals washed their hands prior to substrate handling, we found that a significant number of epidermal cells (between ~5x10 (3) and ~1x10 (5)) could still be recovered from these samples, suggesting that other types of biological information may be present even when no amplifiable nuclear DNA is present. These results help to elucidate the biological context for touch samples and characterize factors that may contribute to patterns of transfer and persistence of genetic material in forensic evidence.

Linear polymer separation using carbon-nanotube-modified centrifugal filter units

The separation of linear polymers such as polysaccharides and polyethylene glycol was performed with modified commercial centrifugal filter units. The deposition of a 0.16-0.35 μm layer of modified carbon nanotubes prevented permeation of linear polymers of molecular weight higher than 20 000 Da through the membrane. It allowed facile purification of solution of 0.1 g of polymer samples from small molecules within 25 min by using a bench-top centrifuge. The structure of modified carbon nanotubes was optimized in order to achieve good adhesion to the low binding regenerated cellulose surface and low solubility in aqueous solutions after deposition. The best modification of carbon nanotubes was oxidation and subsequent amide formation of diethanolamine. Introduction of acetic acid groups using sodium chloroacetate worked equally well. The modified filter could be used multiple times without the decrease of the efficiency. The carbon nanotubes layer was stable in aqueous solutions in a pH range of 1-7. The proposed method provides a convenient way of purification of modified polymers in research areas such as drug delivery or macromolecular probes synthesis.