Developmental validation of Oxford Nanopore Technology MinION sequence data and the NGSpeciesID bioinformatic pipeline for forensic genetic species identification

Advancing pathogen surveillance by nanopore sequencing and genotype characterization of Acheta domesticus densovirus in mass-reared house crickets

Rapid and reliable detection of pathogens is crucial to complement the growing industry of mass-reared insects, in order to safeguard the insect colonies from outbreak of diseases, which may cause significant economic loss. Current diagnostic methods are mainly based on conventional PCR and microscopic examination, requiring prior knowledge of disease symptoms and are limited to identifying known pathogens. Here, we present a rapid nanopore-based metagenomics approach for detecting entomopathogens from the European house cricket (Acheta domesticus). In this study, the Acheta domesticus densovirus (AdDV) was detected from diseased individuals using solely Nanopore sequencing. Virus reads and genome assemblies were obtained within twenty-four hours after sequencing. Subsequently, due to the length of the Nanopore reads, it was possible to reconstruct significantly large parts or even the entire AdDV genome to conduct studies for genotype identification. Variant analysis indicated the presence of three AdDV genotypes within the same house cricket population, with association to the vital status of the diseased crickets. This contrast provided compelling evidence for the existence of non-lethal AdDV genotypes. These findings demonstrated nanopore-based metagenomics sequencing as a powerful addition to the diagnostic tool kit for routine pathogen surveillance and diagnosis in the insect rearing industry.

Review: Wildlife forensic genetics-Biological evidence, DNA markers, analytical approaches, and challenges

Wildlife-related crimes are the second most prevalent lawbreaking offense globally. This illicit trade encompasses hunting, breeding and trafficking. Besides diminishing many species and their habitats and ecosystems, hindering the economic development of local communities that depend on them, undermining the rule of law and financing terrorism, various cross-species transmissions (zoonoses) of pathogens, including COVID-19, can be attributed to wildlife crimes. Wildlife forensics applies interdisciplinary scientific analyses to support law enforcement in investigating wildlife crimes. Its main objectives are to identify the taxonomic species in question, determine if a crime has been committed, link a suspect to the crime and support the conviction and prosecution of the perpetrator. This article reviews wildlife crime and its implications, wildlife forensic science investigation, common forms of wildlife biological evidence, including DNA, wildlife DNA techniques and challenges in wildlife forensic genetics. The article also reviews the contributions of genetic markers such as short tandem repeat (STR) and mitochondrial DNA (mtDNA) markers, which provide the probative genetic data representing the bulk of DNA evidence for solving wildlife crime. This review provides an overview of wildlife DNA databases, which are critical for searching and matching forensic DNA profiles and sequences and establishing how frequent forensic DNA profiles and sequences are in a particular population or geographic region. As such, this review will contain an in-depth analysis of the current status of wildlife forensic genetics, and it will be of general interest to wildlife and conservation biologists, law enforcement officers, and academics interested in combating crimes against wildlife using animal forensic DNA methods.

ONTbarcoder 2.0: rapid species discovery and identification with real-time barcoding facilitated by Oxford Nanopore R10.4

Most arthropod species are undescribed and hidden in specimen-rich samples that are difficult to sort to species using morphological characters. For such samples, sorting to putative species with DNA barcodes is an attractive alternative, but needs cost-effective techniques that are suitable for use in many laboratories around the world. Barcoding using the portable and inexpensive MinION sequencer produced by Oxford Nanopore Technologies (ONT) could be useful for presorting specimen-rich samples with DNA barcodes because it requires little space and is inexpensive. However, similarly important is user-friendly and reliable software for analysis of the ONT data. It is here provided in the form of ONTbarcoder 2.0 that is suitable for all commonly used operating systems and includes a Graphical User Interface (GUI). Compared with an earlier version, ONTbarcoder 2.0 has three key improvements related to the higher read quality obtained with ONT's latest flow cells (R10.4), chemistry (V14 kits) and basecalling model (super-accuracy model). First, the improved read quality of ONT's latest flow cells (R10.4) allows for the use of primers with shorter indices than those previously needed (9 bp vs. 12-13 bp). This decreases the primer cost and can potentially improve PCR success rates. Second, ONTbarcoder now delivers real-time barcoding to complement ONT's real-time sequencing. This means that the first barcodes are obtained within minutes of starting a sequencing run; i.e. flow cell use can be optimized by terminating sequencing runs when most barcodes have already been obtained. The only input needed by ONTbarcoder 2.0 is a demultiplexing sheet and sequencing data (raw or basecalled) generated by either a Mk1B or a Mk1C. Thirdly, we demonstrate that the availability of R10.4 chemistry for the low-cost Flongle flow cell is an attractive option for users who require only 200-250 barcodes at a time.

Special Issue "Molecular Biology in Forensic Science: Past, Present and Future"

Molecular biology has always represented an enviable tool in the fields of biosciences, diagnostics, and forensic sciences [...].

A proof-of-principle study: The potential application of MiniHap biomarkers in ancestry inference based on the QNome nanopore sequencing

Haplotyped SNPs convey forensic-related information, and microhaplotypes (MHs), as the most representative of this kind of marker, have proved the potential value for human forensics. In recent years, nanopore sequencing technology has developed rapidly, with its outstanding ability to sequence long continuous DNA fragments and obtain phase information, making the detection of longer haplotype marker possible. In this proof-of-principle study, we proposed a new type of forensic marker, MiniHap, based on five or more SNPs within a molecular distance less than 800 bp, and investigated the haplotype data of 56 selected MiniHaps in five Chinese populations using the QNome nanopore sequencing. The sequencing performance, allele (haplotype) frequencies, forensic parameters, effective number of alleles (Ae), and informativeness (In) were subsequently calculated. In addition, we performed principal component analysis (PCA), phylogenetic tree, and structure analysis to investigate the population genetic relationships and ancestry components among the five investigated populations and 26 worldwide populations. MiniHap-04 exhibited remarkable forensic efficacy, with 148 haplotypes reported and the Ae was 66.9268. In addition, the power of discrimination (PD) was 0.9934, the probability of exclusion (PE) was 0.9898, and the In value was 0.7893. Of the 56 loci, 85.71% had PD values above 0.85, 66.07% had PE values above 0.54, 67.86% had Ae values over 7.0%, and 55.36% were with In values above 0.2 across all samples, indicating that most of the MiniHaps are suitable for individual identification, paternity testing, mixture deconvolution, and ancestry inference. Moreover, the results of PCA, phylogenetic tree and structure analysis demonstrated that this MiniHap panel had the competency in continental population ancestry inference, but the differentiation within intracontinental/linguistically restricted subpopulations was not ideal. Such findings suggested that the QNome device for MiniHap detection was feasible and this novel marker has the potential in ancestry inference. Yet, the establishment of a more comprehensive database with sufficient reference population data remains necessary to screen more suitable MiniHaps.

The United States dried seahorse trade: A comparison of traditional Chinese medicine and ecommerce-curio markets using molecular identification

Tens of millions of dried seahorses (genus Hippocampus) are traded annually, and the pressure from this trade along with their life history traits (involved parental care and small migration distances and home ranges) has led to near global population declines. This and other forms of overexploitation have led to all seahorse species being listed in Appendix II under the Convention on International Trade in Endangered Species of Wild Fauna and Flora (CITES). The signatory nations of CITES recommended a 10-cm size limit of seahorses to ensure harvested individuals have reached reproductive maturity, and have thus had the chance to produce offspring, to maintain a more sustainable global seahorse fishery. We assessed adherence to CITES recommendations using DNA barcoding and size measurements to compare two prominent U.S. dried seahorse markets: (1) traditional Chinese medicine (TCM), and (2) non-medicinal ecommerce and coastal curio (ECC). We also estimated U.S. import abundance from CITES records. Of the nine species identified among all samples (n = 532), eight were found in the TCM trade (n = 168); composed mostly (75%) of the Indo-Pacific species Hippocampus trimaculatus, and Hippocampus spinosissimus, and the Latin American Hippocampus ingens. In contrast, ECC samples (n = 344) included 5 species, primarily juvenile Indo-Pacific Hippocampus kuda (51.5%) and the western Atlantic Hippocampus zosterae (40.7). The majority of TCM samples (85.7%) met the CITES size recommendation, in contrast to 4.8% of ECC samples. These results suggest non-size discriminatory bycatch is the most likely source of imported ECC specimens. In addition, CITES records indicate that approximately 602,275 dried specimens were imported into the U.S. from 2004-2020, but the exact species composition remains unknown as many U.S. imports records list one species or Hippocampus spp. from confiscated shipments due to difficulties in morphological identification and large numbers of individuals per shipment. Molecular identification was used to identify the species composition of confiscated shipment imports containing undesignated species, and similar to TCM, found H. trimaculatus and H. spinosissimus the most abundant. By combining DNA barcoding, size comparisons, and CITES database records, these results provide an important glimpse into the two primary dried U.S. seahorse end-markets, and may further inform the conservation status of several Hippocampus species.

Using nanopore sequencing to identify fungi from clinical samples with high phylogenetic resolution

The study of microbiota has been revolutionized by the development of DNA metabarcoding. This sequence-based approach enables the direct detection of microorganisms without the need for culture and isolation, which significantly reduces analysis time and offers more comprehensive taxonomic profiles across broad phylogenetic lineages. While there has been an accumulating number of researches on bacteria, molecular phylogenetic analysis of fungi still remains challenging due to the lack of standardized tools and the incompleteness of reference databases limiting the accurate and precise identification of fungal taxa. Here, we present a DNA metabarcoding workflow for characterizing fungal microbiota with high taxonomic resolution. This method involves amplifying longer stretches of ribosomal RNA operons and sequencing them using nanopore long-read sequencing technology. The resulting reads were error-polished to generate consensus sequences with 99.5-100% accuracy, which were then aligned against reference genome assemblies. The efficacy of this method was explored using a polymicrobial mock community and patient-derived specimens, demonstrating the marked potential of long-read sequencing combined with consensus calling for accurate taxonomic classification. Our approach offers a powerful tool for the rapid identification of pathogenic fungi and has the promise to significantly improve our understanding of the role of fungi in health and disease.

The Revolution of Animal Genomics in Forensic Sciences

Nowadays, the coexistence between humans and domestic animals (especially dogs and cats) has become a common scenario of daily life. Consequently, during a forensic investigation in civil or criminal cases, the biological material from a domestic animal could be considered "evidence" by law enforcement agencies. Animal genomics offers an important contribution in attacks and episodes of property destruction or in a crime scene where the non-human biological material is linked to the victim or perpetrator. However, only a few animal genetics laboratories in the world are able to carry out a valid forensic analysis, adhering to standards and guidelines that ensure the admissibility of data before a court of law. Today, forensic sciences focus on animal genetics considering all domestic species through the analysis of STRs (short tandem repeats) and autosomal and mitochondrial DNA SNPs (single nucleotide polymorphisms). However, the application of these molecular markers to wildlife seems to have gradually gained a strong relevance, aiming to tackle illegal traffic, avoid the loss of biodiversity, and protect endangered species. The development of third-generation sequencing technologies has glimmered new possibilities by bringing "the laboratory into the field", with a reduction of both the enormous cost management of samples and the degradation of the biological material.

Spatio-temporal variation of the microbiome and resistome repertoire along an anthropogenically dynamic segment of the Ganges River, India

Aquatic ecosystems are regarded as a hub of antibiotic and metal resistance genes. River Ganges is a unique riverine system in India with socio-cultural and economic significance. However, it remains underexplored for its microbiome and associated resistomes along its anthropogenically impacted course. The present study utilized a nanopore sequencing approach to depict the microbial community structure in the sediments of the river Ganges harboring antibiotic and metal resistance genes (A/MRGs) in lower stretches known for anthropogenic impact. Comprehensive microbiome analyses revealed resistance genes against 23 different types of metals and 28 classes of antibiotics. The most dominant ARG category was multidrug resistance, while the most prevalent MRGs conferred resistance against copper and zinc. Seasonal differences dismally affected the microbiota of the Ganges. However, resistance genes for fosmidomycin and tetracycline varied with season ANOVA, p < 0.05. Interestingly, 333 and 334 ARG subtypes were observed at all the locations in pre-monsoon and post-monsoon, respectively. The taxa associated with the dominant ARGs and MRGs were Pseudomonas and Burkholderia, which are important nosocomial pathogens. A substantial phage diversity for pathogenic and putrefying bacteria at all locations attracts attention for its use to tackle the dissemination of antibiotic and metal-resistant bacteria. This study suggests the accumulation of antibiotics and metals as the driving force for the emergence of resistance genes and the affiliated bacteria trafficking them. The present metagenomic assessment highlights the need for comprehensive, long-term biological and physicochemical monitoring and mitigation strategies toward the contaminants associated with ARGs and MRGs in this nationally important river.

A method for determining the origin of crude drugs derived from animals using MinION, a compact next-generation sequencer

We evaluated whether MinION, an inexpensive portable sequencer, can be used to identify the origin of crude drugs derived from animals. Standard and nonstandard crude drugs with different species of origin were examined. In addition, standards mixed with nonstandard samples were used. As a target gene, cytochrome c oxidase I was amplified and sequenced. The fast mode results had a slightly lower match ratio than high-accuracy mode, but the animals of origin were correctly determined by BLAST for all samples. For antler velvet derived from Rangifer tarandus, even when the sequences were aligned based on Cervus elaphus, the animal of origin was determined correctly. Minor contents could be detected from mixtures of two animals, if the mixtures contained at least 19:1 mtDNA when the coverage allele-fraction threshold was 0.05. By contrast, in fast mode, two sequences could not be separated due to the low accuracy of the base-calling for each read. For fieldwork, the species of origin of crude drugs could be identified with only simple DNA extraction and library preparation. Therefore, MinION appears to be a convenient tool for identifying the origins of crude drugs derived from animals.

Nanopore-only assemblies for genomic surveillance of the global priority drug-resistant pathogen, Klebsiella pneumoniae

Oxford Nanopore Technologies (ONT) sequencing has rich potential for genomic epidemiology and public health investigations of bacterial pathogens, particularly in low-resource settings and at the point of care, due to its portability and affordability. However, low base-call accuracy has limited the reliability of ONT data for critical tasks such as antimicrobial resistance (AMR) and virulence gene detection and typing, serotype prediction, and cluster identification. Thus, Illumina sequencing remains the standard for genomic surveillance despite higher capital and running costs. We tested the accuracy of ONT-only assemblies for common applied bacterial genomics tasks (genotyping and cluster detection, implemented via Kleborate, Kaptive and Pathogenwatch), using data from 54 unique Klebsiella pneumoniae isolates. ONT reads generated via MinION with R9.4.1 flowcells were basecalled using three alternative models [Fast, High-accuracy (HAC) and Super-accuracy (SUP), available within ONT's Guppy software], assembled with Flye and polished using Medaka. Accuracy of typing using ONT-only assemblies was compared with that of Illumina-only and hybrid ONT+Illumina assemblies, constructed from the same isolates as reference standards. The most resource-intensive ONT-assembly approach (SUP basecalling, with or without Medaka polishing) performed best, yielding reliable capsule (K) type calls for all strains (100 % exact or best matching locus), reliable multi-locus sequence type (MLST) assignment (98.3 % exact match or single-locus variants), and good detection of acquired AMR genes and mutations (88-100 % correct identification across the various drug classes). Distance-based trees generated from SUP+Medaka assemblies accurately reflected overall genetic relationships between isolates. The definition of outbreak clusters from ONT-only assemblies was problematic due to inflation of SNP counts by high base-call errors. However, ONT data could be reliably used to 'rule out' isolates of distinct lineages from suspected transmission clusters. HAC basecalling + Medaka polishing performed similarly to SUP basecalling without polishing. Therefore, we recommend investing compute resources into basecalling (SUP model), wherever compute resources and time allow, and note that polishing is also worthwhile for improved performance. Overall, our results show that MLST, K type and AMR determinants can be reliably identified with ONT-only R9.4.1 flowcell data. However, cluster detection remains challenging with this technology.

Comparing Long-Read Assemblers to Explore the Potential of a Sustainable Low-Cost, Low-Infrastructure Approach to Sequence Antimicrobial Resistant Bacteria With Oxford Nanopore Sequencing

Long-read sequencing (LRS) can resolve repetitive regions, a limitation of short read (SR) data. Reduced cost and instrument size has led to a steady increase in LRS across diagnostics and research. Here, we re-basecalled FAST5 data sequenced between 2018 and 2021 and analyzed the data in relation to gDNA across a large dataset (n = 200) spanning a wide GC content (25-67%). We examined whether re-basecalled data would improve the hybrid assembly, and, for a smaller cohort, compared long read (LR) assemblies in the context of antimicrobial resistance (AMR) genes and mobile genetic elements. We included a cost analysis when comparing SR and LR instruments. We compared the R9 and R10 chemistries and reported not only a larger yield but increased read quality with R9 flow cells. There were often discrepancies with ARG presence/absence and/or variant detection in LR assemblies. Flye-based assemblies were generally efficient at detecting the presence of ARG on both the chromosome and plasmids. Raven performed more quickly but inconsistently recovered small plasmids, notably a ∼15-kb Col-like plasmid harboring bla KPC . Canu assemblies were the most fragmented, with genome sizes larger than expected. LR assemblies failed to consistently determine multiple copies of the same ARG as identified by the Unicycler reference. Even with improvements to ONT chemistry and basecalling, long-read assemblies can lead to misinterpretation of data. If LR data are currently being relied upon, it is necessary to perform multiple assemblies, although this is resource (computing) intensive and not yet readily available/useable.

Long-Reads-Based Metagenomics in Clinical Diagnosis With a Special Focus on Fungal Infections

Identification of the causative infectious agent is essential in the management of infectious diseases, with the ideal diagnostic method being rapid, accurate, and informative, while remaining cost-effective. Traditional diagnostic techniques rely on culturing and cell propagation to isolate and identify the causative pathogen. These techniques are limited by the ability and the time required to grow or propagate an agent in vitro and the facts that identification based on morphological traits are non-specific, insensitive, and reliant on technical expertise. The evolution of next-generation sequencing has revolutionized genomic studies to generate more data at a cheaper cost. These are divided into short- and long-read sequencing technologies, depending on the length of reads generated during sequencing runs. Long-read sequencing also called third-generation sequencing emerged commercially through the instruments released by Pacific Biosciences and Oxford Nanopore Technologies, although relying on different sequencing chemistries, with the first one being more accurate both platforms can generate ultra-long sequence reads. Long-read sequencing is capable of entirely spanning previously established genomic identification regions or potentially small whole genomes, drastically improving the accuracy of the identification of pathogens directly from clinical samples. Long-read sequencing may also provide additional important clinical information, such as antimicrobial resistance profiles and epidemiological data from a single sequencing run. While initial applications of long-read sequencing in clinical diagnosis showed that it could be a promising diagnostic technique, it also has highlighted the need for further optimization. In this review, we show the potential long-read sequencing has in clinical diagnosis of fungal infections and discuss the pros and cons of its implementation.

Forensic nanopore sequencing of microhaplotype markers using QitanTech's QNome

In recent years, extraordinary progress has been made in genome sequencing technologies, which has led to a decrease in cost and an increase in the diversity of sequenced genomes. Nanopore sequencing is one of the latest genome sequencing technologies. It aims to sequence longer contiguous pieces of DNA, which are essential for resolving structurally complex regions, and provides a new approach for forensic genetics to detect longer markers in real time. To date, multiple studies have been conducted to sequence forensic markers using MinION from Oxford Nanopore Technologies (ONT), and the results indicate that nanopore sequencing holds promise for forensic applications. Qitan Technology (QitanTech) recently launched its first commercial nanopore genome sequencer, QNome. It could achieve a read length of more than 150 kbp, and could generate approximately 500 Mb of data in 8 h. In this pilot study, we explored and validated this alternative nanopore sequencing device for microhaplotype (MH) profiling using a custom set of 15 MH loci. Seventy single-contributor samples were divided into 7 batches, each of which included 10 samples and control DNA 9947A and was sequenced by QNome. MH genotypes generated from QNome were compared to those from Ion Torrent sequencing (Ion S5XL system) to evaluate the accuracy and stability. Twelve samples randomly selected from the last three batches and Control DNA 9947A were also subjected to ONT MinION sequencing (with R9.4 flow cell) for parallel comparison. Based on MHtyper, a bioinformatics workflow developed for automated MH designation, all MH loci can be genotyped and reliably phased using the QNome data, with an overall accuracy of 99.83% (4 errors among 2310 genotypes). Three occurred near or in the region of homopolymer sequences, and one existed within 50 bp of the start of the sequencing reaction. In the last 15 samples (12 individual samples and 3 replicates of control DNA 9947A), two SNPs located at 4-mer homopolymers failed to obtain reliable genotypes on the MinION data. This study shows the potential of state-of-the-art nanopore sequencing methods to analyze forensic MH markers. Given the rapid pace of change, sporadic and nonrepetitive errors presented in this study are expected to be resolved by further developments of nanopore technologies and analysis tools.

A Round Trip to the Desert: In situ Nanopore Sequencing Informs Targeted Bioprospecting

Bioprospecting expeditions are often performed in remote locations, in order to access previously unexplored samples. Nevertheless, the actual potential of those samples is only assessed once scientists are back in the laboratory, where a time-consuming screening must take place. This work evaluates the suitability of using Nanopore sequencing during a journey to the Tabernas Desert (Spain) for forecasting the potential of specific samples in terms of bacterial diversity and prevalence of radiation- and desiccation-resistant taxa, which were the target of the bioprospecting activities. Samples collected during the first day were analyzed through 16S rRNA gene sequencing using a mobile laboratory. Results enabled the identification of locations showing the greatest and the least potential, and a second, informed sampling was performed focusing on those sites. After finishing the expedition, a culture collection of 166 strains belonging to 50 different genera was established. Overall, Nanopore and culturing data correlated well, since samples holding a greater potential at the microbiome level also yielded a more interesting set of microbial isolates, whereas samples showing less biodiversity resulted in a reduced (and redundant) set of culturable bacteria. Thus, we anticipate that portable sequencers hold potential as key, easy-to-use tools for in situ-informed bioprospecting strategies.

International Wildlife Trafficking: A perspective on the challenges and potential forensic genetics solutions

International wildlife trafficking (IWT) is a thriving and pervasive illegal enterprise that adversely affects modern societies. Yet, despite being globally recognized as a threat to biodiversity, national security, economy, and biosecurity, IWT remains largely unabated and is proliferating at an alarming rate. The increase in IWT is generally attributed to a lack of prioritization to curb wildlife crime through legal and scientific infrastructure. This review: (1) lays out the damaging scope and influence of IWT; (2) discusses the potential of DNA marker systems, barcodes, and emerging molecular technologies, such as long-read portable sequencing, to facilitate rapid, in situ identification of species and individuals; and (3) encourages initiatives that promote quality and innovation. Interdisciplinary collaboration promises to be one of the most effective ways forward to surmounting the complex scientific and legal challenges posed by IWT.