Detection of human DNA in the air

Air DNA forensics: Novel air collection method investigations for human DNA identification

Modern techniques can generate highly discriminatory DNA profiles from minuscule biological samples, providing valuable information in criminal investigations and court proceedings. However, trace and touch DNA samples, due to their nature, often have lower success rates than other biological materials, such as blood. Further, forensically aware criminals can utilize gloves and meticulously clean the crime scene to remove DNA traces of themselves from contacted surfaces. Air sampling offers a novel approach to the collection of human DNA that has the potential to bypass some of these issues. This study reports on the results of research into the prevalence and persistence of human DNA in the air. The ability to collect human DNA from the air was investigated with the use of an AirPrep Cub Sampler ACD220 in different spaces, with and without the presence of individuals for various durations of sample collection. Results of this study demonstrate that level of occupation and sampling duration each have an influence on quantity and quality of DNA recovered from the air whereas the effects of orientation and distance of participants from the collection device as well as sequence of occupation remain unclear and require further investigation.

The efficacy of Diamond™ nucleic acid dye-stained cell counting techniques for forensic application

Touch DNA is one of the most common types of biological material collected during criminal investigations. Diamond™ Nucleic Acid Dye (DD) has been shown to aid in touch sample visualisation and target sampling. It has also been used as a method of shedder categorisation that is cheaper and quicker than DNA methods. However, the DD method routinely involves manual cell counting, which can result in intra and inter-person variability similar to other manual techniques used in forensic science, for example, fingerprint identification. Additionally, DD based shedder categorisation involves counting cells in a portion of the touch deposit to extrapolate an individual's shedder status, and the sampling effect of such estimations is currently unknown. The present study tested different data analysis aspects of the DD method, including counting variability within and between people, shedder classification differences based on different counting methods (entire thumbprint, sub-section of a print with most cells, sub-section of a print deemed most representative of the entire thumbprint, and random sections), the use of ImageJ software to semi-automate counting and the use and extension of the DD method for investigating DNA Transfer, Persistence, Prevalence and Recovery (DNA-TPPR). The results of this study show that there are meaningful differences observed during counting processes both between and within people. These differences tended to increase as the factor of time, or the duration of counting, rather than the complexity of cell deposits being assessed. Investment in cell counting software that eliminates personal factors, such as boredom fatigue, can remedy most of these issues, however, will require optimisation, such as fibre recognition. Shedder testing was shown to be affected by the choice of sampling and categorisation methods, and suggested that using an entire finger or larger section size can provide increased precision. Finally, inverted worn gloves stained with DD may provide an acceptable alternative for hands in DNA-TPPR investigations, providing an interesting alternative for future research.

A systematic approach to the analysis of illicit drugs for DNA with an overview of the problems encountered

Due to the restricted nature of illicit drugs, it is difficult to conduct research surrounding the analysis of this drug material for any potential DNA in sufficient quantities acceptable for high numbers of replicates. Therefore, the current research available in peer reviewed journals thus far regarding analysing illicit drugs for DNA has been performed under varying experimental conditions, often using surrogate chemicals in place of illicit drugs. The data presented within this study originated from the analysis of genuine illicit drugs prepared both in controlled environments and those seized at the Australian border (and therefore from an uncontrolled environment) to determine if DNA can be obtained from this type of material. This study has been separated into three main parts (total n=114 samples): firstly, methamphetamine synthesised within a controlled environment was spiked with both saliva and trace DNA to determine the yield following DNA extraction; secondly, methamphetamine also synthesised in a controlled environment but on a larger scale was tested for the amount of DNA added incidentally throughout the synthesis, including the additional steps of recrystallising, homogenising and "cutting" the drug material to simulate preparation for distribution; and thirdly, the detection of human DNA within samples of cocaine and heroin seized at the Australian border. The DNA Fast Flow Microcon Device was utilised to concentrate all replicates from the same source into one combined extract to improve the DNA profiles for the samples where no DNA spiking occurred. Full STR profiles were successfully obtained from drug samples spiked with both saliva and trace DNA. Methamphetamine was present in the final DNA extracts and caused incompatibilities with the quantification of DNA using Qubit. The yields of DNA from drugs not spiked with DNA sources were much lower, resulting in 36 % of samples yielding alleles where all others did not. These results were not unexpected given these were realistic drug samples where the history of the drug material was unknown. This is the first study to obtain DNA profiles from genuine illicit drug material in both controlled and uncontrolled environments and indicates that the analysis of illicit drugs for DNA is an avenue worth pursuing to provide information which can in turn assist with disrupting the supply of these drugs. Given that DNA profiling is carried out worldwide using essentially the same systems as described within this study, the potential for impact is on a national and international scale.

Emerging use of air eDNA and its application to forensic investigations - A review

Biological material is routinely collected at crime scenes and from exhibits and is a key type of evidence during criminal investigations. Improvements in DNA technologies allow collection and profiling of trace samples, comprised of few cells, significantly expanding the types of exhibits targeted for DNA analysis to include touched surfaces. However, success rates from trace and touch DNA samples tend to be poorer compared to other biological materials such as blood. Simultaneously, there have been recent advances in the utility of environmental DNA collection (eDNA) in identification and tracking of different biological organisms and species from bacteria to naked mole rats in different environments, including, soil, ice, snow, air and aquatic. This paper examines the emerging methods and research into eDNA collection, with a special emphasis on the potential forensic applications of human DNA collection from air including challenges and further studies required to progress implementation.

Up in the air: Presence and collection of DNA from air and air conditioner units

Biological material is routinely collected at crime scenes and from exhibits and is a key type of evidence during criminal investigations. Touch or trace DNA samples from surfaces and objects deemed to have been contacted are frequently collected. However, a person of interest may not leave any traces on contacted surfaces, for example, if wearing gloves. A novel means of sampling human DNA from air offers additional avenues for DNA collection. In the present study, we report on the results of a pilot study into the prevalence and persistence of human DNA in the air. The first aspect of the pilot study investigates air conditioner units that circulate air around a room, by sampling units located in four offices and four houses at different time frames post-cleaning. The second aspect investigates the ability to collect human DNA from the air in rooms, with and without people, for different periods of time and with different types of collection filters. Results of this pilot study show that human DNA can be collected on air conditioner unit surfaces and from the air, with air samples representing the more recent occupation while air conditioner units showing historic use of the room.

Trace DNA Transfer in Co-Working Spaces: The Importance of Background DNA Analysis

The presence of background DNA (bgDNA) can hinder the evaluation of DNA evidence at the activity level, especially when the suspect is expected to be retrieved due to their habitual occupation of the investigated environment. Based on real-life casework circumstances, this study investigates the prevalence, composition, origin, and probable transfer routes of bgDNA found on personal items in situations where their owner and person of interest (POI) share the same workspace. Baseline values of bgDNA were evaluated on the participants' personal items. Secondary and higher degree transfer scenarios of non-self DNA deposition were also investigated. The DNA from co-workers and co-inhabiting partners can be recovered from an individual's personal belongings. Non-self DNA present on the hands and deposited on a sterile surface can generate uninformative profiles. The accumulation of foreign DNA on surfaces over time appears to be crucial for the recovery of comparable profiles, resulting in detectable further transfer onto other surfaces. For a thorough evaluation of touch DNA traces at the activity level, it is necessary to collect information not only about DNA transfer probabilities but also about the presence of the POI as part of the 'baseline' bgDNA of the substrates involved.

Inadvertent human genomic bycatch and intentional capture raise beneficial applications and ethical concerns with environmental DNA

The field of environmental DNA (eDNA) is advancing rapidly, yet human eDNA applications remain underutilized and underconsidered. Broader adoption of eDNA analysis will produce many well-recognized benefits for pathogen surveillance, biodiversity monitoring, endangered and invasive species detection, and population genetics. Here we show that deep-sequencing-based eDNA approaches capture genomic information from humans (Homo sapiens) just as readily as that from the intended target species. We term this phenomenon human genetic bycatch (HGB). Additionally, high-quality human eDNA could be intentionally recovered from environmental substrates (water, sand and air), holding promise for beneficial medical, forensic and environmental applications. However, this also raises ethical dilemmas, from consent, privacy and surveillance to data ownership, requiring further consideration and potentially novel regulation. We present evidence that human eDNA is readily detectable from 'wildlife' environmental samples as human genetic bycatch, demonstrate that identifiable human DNA can be intentionally recovered from human-focused environmental sampling and discuss the translational and ethical implications of such findings.

DNA transfer to placed, stored, and handled drug packaging and knives in houses

Forensic laboratories often sample weapons and clip-seal plastic bags (CSPB) used to package illicit material for the purpose of identifying the handler(s). However, there may be other explanations as to how a person's DNA was transferred to such items. This may include an individual storing the item among their personal belongings for somebody else or the item being stored among their belongings without their knowledge. Here we investigate the direct transfer of DNA to knives and CSPB during handling and explore two feasible alternative explanations related to the indirect transfer of DNA to these items in residential environments. The handling of DNA-free items was performed by 10 individuals who were instructed, on separate occasions, to cut a foam board in half and fill a CSPB with a drug substitute. To explore indirect transfer, sets of these items were (a) placed on kitchen benches and coffee/dining tables for ∼1 min, or (b) stored for two days in kitchen and bedroom drawers within the homes of 10 individuals. After each of the three scenarios, samples were collected from the knife handle and blade, the body and seal of the CSPB, and the surface the items were placed on, the latter as a measure to gain insight into the presence of prevalent and/or background DNA. DNA transfer was observed under all three scenarios, though more frequently when items were handled or stored for 2 days, compared to when placed on a surface for ∼1 min. Under the latter scenario, DNA, if present, was below the level of detection in many samples and produced no profile, suggesting that detectable DNA transfer occurs to a lesser degree from static brief contacts. The study results and associated probabilities will assist forensic examiners with their interpretation of case circumstances regarding the transfer and recovery of DNA from these items.

DNA accumulation and transfer within an operational forensic exhibit storeroom

The increased sensitivity of current DNA profiling technologies allows the detection of trace amounts of DNA. With these advancements, there is an increased probability of detecting trace levels of DNA from contamination. Studies which investigate the accumulation and transfer of DNA within forensic laboratories provide insight into the possible mechanisms which may result in the contamination of exhibits. To gain a greater understanding of the level of DNA transfer between exhibit packaging and forensic workspaces, the accumulation of DNA within an operational forensic exhibit storeroom was investigated. Samples were collected from previously cleaned forensic exhibit storeroom shelves at various time points over a 14-week period. To determine the source of accumulating DNA, profiles generated from shelf samples were compared to the laboratory staff elimination database and the profiles generated from exhibits stored on each of the shelves sampled over the course of the study. Additionally, all samples were compared using STRmix™ mixture-to-mixture profile analysis, to identify the presence of common non-staff DNA donors and DNA from exhibits stored on the shelves sampled. As sampling time intervals increased, there was a significant increase in DNA quantity (ng) and number of profile contributors. The shelf height was also observed to influence the number of profile contributors, with higher numbers of contributors being found on lower shelves. DNA profiles generated from the shelf samples were matched to DNA from forensic staff members who enter the storeroom and police employees, who do not enter the storeroom. There were three instances where a common DNA profile contributor was identified between a shelf sample and the profile generated from an exhibit.This study provides insight into whether current exhibit storage procedures are still adequate given the highly sensitive DNA profiling systems currently used.