Fixation choices for closed simple unstable oblique phalangeal and metacarpal fractures

Cost Comparison of Intramedullary Screw Fixation Versus Open Reduction and Internal Fixation With Plate and Screw Technique for Metacarpal Fractures

BACKGROUND

Intramedullary screw (IMS) fixation for metacarpal fractures is a relatively new fixation technique in comparison to plate and screw constructs. Our hypothesis evaluated whether IMS fixation for metacarpal fractures results in lower overall health care-associated costs in comparison to open reduction and internal fixation (ORIF).

METHODS

A retrospective review of patients undergoing IMS fixation for metacarpal fractures at a single center during 2018 to 2022 was conducted. Health care-associated costs included primary operative costs (surgical time and implant(s)) and postoperative costs (therapy, splinting, and radiology). Costs were compared with age-matched and fracture pattern-matched controls who underwent ORIF with plate and screw construct. Subgroup analysis of cost outcomes excluding outliers was completed.

RESULTS

Eight subjects met the inclusion criteria and matched with an ORIF group. Primary operative costs were significantly higher in the ORIF group (mean difference of $1830, 95% CI: $1006 to $2653) The cost of an IMS at our institution was $584, whereas the average cost for plate and screw construct was $2538 (mean difference of $1953, 95% CI: $1665 to $2243). Total surgical costs were on average $3784 more for the ORIF group (95% CI: $2869 to $4700). There was no significant difference in outpatient follow-up costs (95% CI: -$441 to $3180). Total overall costs were significantly lower for the IMS group (95% CI: $2693 to $6513).

CONCLUSIONS

Total primary operative costs and overall health care-associated costs for IMS fixation of metacarpal fractures is significantly lower than ORIF. There was no statistical difference in follow-up care costs. To better determine the indirect costs for patients, high-powered prospective studies will be required.

Comparison of mini-plate versus Kirschner wire internal fixation for fifth metacarpal basal fractures with carpometacarpal joint dislocation

OBJECTIVE

To compare the outcome of mini-plate versus Kirschner wire (K-wire) internal fixation for treating fifth metacarpal basal fractures with carpometacarpal joint dislocation.

METHOD

A total of 46 patients with fifth metacarpal basal fractures combined with carpometacarpal joint dislocation were divided into two groups. The control group received K-wire fixation, while the observation group underwent mini-plate fixation. We assessed treatment effectiveness, surgical parameters, range of motion, serum stress markers, quality of life scores, and postoperative complication rates. A multivariable logistic regression analysis was performed to identify factors influencing postoperative joint function.

RESULTS

The observation group demonstrated a significantly higher excellent and good rate compared to the control group (P<0.05). Additionally, the observation group had a lower intraoperative bleeding volume, shorter incision lengths, and faster fracture healing times, all significant differences (all P<0.05). Postoperative assessments indicated that range of motion, quality of life scores, and superoxide dismutase levels were significantly improved in the observation group (P<0.05). Conversely, cortisol, angiotensin II, and norepinephrine levels, along with the incidence of postoperative complications, were lower in the observation group compared to the control group (all P<0.05). Logistic regression analysis identified the surgical method as an independent factor affecting postoperative metacarpal joint function (OR = 0.16, P = 0.003).

CONCLUSION

Mini-plate internal fixation is superior to K-wire fixation for the treatment of fifth metacarpal basal fractures with carpometacarpal joint dislocation. It promotes faster fracture healing, reduces serum stress markers, enhances joint mobility and quality of life, and decreases postoperative complications.

Closed-reduction Intramedullary Screw in Fractures of the Proximal Phalanges of the Digits of the Hand: A Series of Three Cases

The most frequent skeletal injuries are hand fractures, which constitute around 20% of all fractures. Fractures of the phalanx are usual, comprising 6% of all fractures. Proximal phalanx fractures arise more often. The main goals of the care are to repair the anatomy, reduce the damage to soft tissue, and mobilize the damaged fingers as soon as stabilization of the fracture allows it. The present report is intended to examine the clinical and radiation effects of proximal phalanx fractures in patients treated with intramedullary screw fixation who underwent closed reduction. We report three consecutive cases of proximal phalanx fracture: two basal fractures and one simple shaft fracture. They were treated surgically with closed reduction with intramedullary headless compression screws. The preoperative magnitude of the angulation of the proximal phalanx averaged 30.3° (range: 13° to 42°). Two patients presented rotational deformity. The clinical findings were measured using the abbreviated version of the Disabilities of the Arm, Shoulder and Hand (Quick-DASH) questionnaire, and the range of motion and functional results were assessed. Complications were observed over a span of at least 3 months. The patients displayed complete active flexion-extension proximal interphalangeal joint and flexion-extension metacarpophalangeal joint without rotative deformity. The scores on the QuickDASH were satisfactory (mean: 2.3; range: 0 to 4.5). No secondary surgeries were performed, and complications were not observed. Intramedullary fixation of proximal phalanx fractures with cannulated tension screws has been shown to be a safe operation, resulting in outstanding functional performance and an early recovery. The fracture is minimized and properly consolidated by the patients.

Biomechanical analysis of plate versus K-wire fixation for metacarpal shaft fractures with wedge-shaped bone defects

BACKGROUND

Metacarpal shaft fracture is a common type of hand fracture. Numerous studies have explored fixing transverse fractures in the midshaft of the metacarpal bone. However, this section of the metacarpal bone is often susceptible to high-energy injury, resulting in comminuted fracture or bone loss. In such cases, wedge-shaped bone defects can develop in the metacarpal shaft, increasing the difficulty of performing fracture fixation. Notably, the research on this type of fracture fixation is limited. This study compared the abilities of four fixation methods to fix metacarpal shaft fractures with wedge-shaped bone defects.

METHODS

In total, 28 artificial metacarpal bones were used. To create wedge-shaped bone defects, an electric saw was used to create metacarpal shaft fractures at the midshaft of each bone. The artificial metacarpal bones were then divided into four groups for fixation. The bones in the first group were fixed with a dorsal locked plate (DP group), those in the second group were fixed with a volar locked plate (VP group), and those in the third group were fixed by combining dorsal and volar locked plates (DP + VP group), and those in the fourth group were fixed with two K-wires (2 K group). Cantilever bending tests were conducted using a material testing machine to measure yielding force and stiffness. The four groups' fixation capabilities were then assessed through analysis of variance and Tukey's test.

RESULTS

The DP + VP group (164.1±44.0 N) achieved a significantly higher yielding force relative to the 2 K group (50.7 ± 8.9 N); the DP group (13.6 ± 3.0 N) and VP group (12.3 ± 1.0 N) did not differ significantly in terms of yielding force, with both achieving lower yielding forces relative to the DP + VP group and 2 K group. The DP + VP group (19.8±6.3 N/mm) achieved the highest level of stiffness, and the other three groups did not differ significantly in terms of stiffness (2 K group, 5.4 ± 1.1 N/mm; DP group, 4.0 ± 0.9 N/mm; VP group, 3.9 ± 1.9 N/mm).

CONCLUSIONS

The fixation method involving the combined use of dorsal and volar locked plates (DP + VP group) resulted in optimal outcomes with respect to fixing metacarpal shaft fractures with volar wedge bone defects.

Early Return of Motion in Patients With Intramedullary Screw Placement for Metacarpal and Phalangeal Fracture Fixation

INTRODUCTION

Hand fractures are associated with significant morbidity. Current management standards often result in prolonged immobilization, stiffness, and delayed return to functional use. Intramedullary (IM) compression screws offer minimal soft tissue disruption and early postoperative active motion. In this study, we describe our outcomes after intraosseous fracture fixation using IM cannulated headless screws for a multitude of fracture patterns.

METHODS

This study is a retrospective review of patients who underwent IM screw placement for fixation of metacarpal and phalangeal fractures by a single surgeon from 2017 to 2022. Data were collected to include patient demographics, fracture details, postoperative complications, and follow-up. Time to range of motion and return to unrestricted motion was recorded.

RESULTS

There were 69 patients with 92 fractures (n = 54 metacarpal, n = 38 phalanx). The median patient age was 45 years (range, 18-89 years) with 75.4% males. Majority presented with a single fracture (n = 50, 72.5%), and 38 patients (55.1%) had open fractures. Small finger was the most affected digit (n = 35, 37.6%). The median time to allow range of motion from surgery was 8.7 days (interquartile range, 0-32) with 32 days (interquartile range, 10-62) for unrestricted use of the hand. Thirty-five patients (50.7%) were allowed controlled motion from the first postoperative day. One patient had loss of reduction requiring reintervention for hardware removal, and 1 patient had superficial skin infection managed with oral antibiotics.

CONCLUSIONS

Our findings indicate that the IM screw provides reliable fixation for a wide variety of fracture patterns with a low complication rate and offers early return to functional use.

Comparing the torsional resistance of different fixation techniques for spiral metacarpal fractures

This study aimed to compare the torsional resistance of three fixation techniques for spiral metacarpal fractures: screw-only fixation, screw plus neutralization plate fixation, and a locking plate construct. A spiral fracture was created on 18 cadaveric metacarpal bones by applying an axial and torsional loading force using an Instron 3343 mechanical tester. The failure strength was defined as the native torque strength. The fractures were divided into three groups and fixed using each of the three techniques. The repaired bones were loaded to failure to determine the post-repair strength. The neutralization plate group conferred a post-repair torque (278.6 Nmm) that was similar to the native torque (292 Nmm) with a diminution of only 4.5% and appeared to provide the best resistance to torsion.

Outcomes After Surgically Managed Oblique Extra-Articular Proximal Phalanx Fractures: A Comparison of Closed-Reduction Percutaneous Pinning and Open-Reduction Internal Fixation With Lag Screws

BACKGROUND

Long oblique extra-articular proximal phalanx fractures are common orthopedic injuries. When unstable and without substantial comminution, treatment options include closed-reduction percutaneous pinning (CRPP) and open-reduction internal fixation using lag screws (ORIF-screws). The aims of this study are primarily to compare the functional outcomes and complication rates between these techniques and secondarily to assess potential factors affecting outcomes after surgery.

METHODS

All patients with long oblique extra-articular proximal phalanx fractures treated surgically within a single orthopedic institution from 2010 to 2017 were identified. Outcome measures and complications were assessed at the final follow-up.

RESULTS

Sixty patients were included in the study with a mean time to the final follow-up of 41 weeks (range: 12-164 weeks). Thirty-four patients (57%) were treated with CRPP and 26 patients (43%) with ORIF-screws. The mean Disabilities of the Arm, Shoulder, and Hand score across both fixation types was 8 (range: 0-43) and did not differ significantly between the 2 groups. Mean proximal interphalangeal extension at the final follow-up was 9° short of full extension after CRPP and 13° short of full extension after ORIF-screws. The rates of flexion contracture and extensor lag were 15% and 41% in the CRPP group compared with 12% and 68% in the ORIF-screws group. Reoperation rates and complication rates did not differ significantly between fixation strategies.

CONCLUSIONS

Acceptable outcomes can be achieved after surgical fixation of long oblique extra-articular proximal phalanx fractures using both CRPP and ORIF-screws. Extensor lag may be more common after ORIF-screws.

Biomechanical study on fixation methods for horizontal oblique metacarpal shaft fractures

OBJECTIVE

To investigate differences in the effectiveness of two lag screws, a regular bone plate, and locking bone plate fixation in treating horizontal oblique metacarpal shaft fractures.

MATERIALS AND METHODS

Horizontal oblique metacarpal shaft fractures were created in 21 artificial metacarpal bones and fixed using one of the three methods: (1) two lag screws, (2) a regular plate, and (3) a locking plate. All the specimens were subjected to the cantilever bending test performed using a material testing machine to enable recording of the force-displacement data of the specimens before failure. The Kruskal-Wallis test was used to compare failure force and stiffness values among the three fixation methods.

RESULTS

The mean failure force of the two lag screw group (78.5 ± 6.6 N, mean + SD) was higher than those of the regular plate group (69.3 ± 17.6 N) and locking plate group (68.2 ± 14.2 N). However, the mean failure force did not significantly differ among the three groups. The mean stiffness value of the two lag screw group (17.8 ± 2.6 N/mm) was lower than those of the regular plate group (20.2 ± 10.5 N/mm) and locking plate group (21.8 ± 3.8 N/mm). However, the mean stiffness value did not significantly differ among the three groups.

CONCLUSION

The fixation strength of two lag screw fixation did not significantly differ from that of regular and locking bone plate fixation, as indicated by the measurement of the ability to sustain force and stiffness.

Comparison of the fixation ability between lag screw and bone plate for oblique metacarpal shaft fracture

Background

For oblique metacarpal shaft fracture, if anatomical reduction is achieved through conservative cast immobilization rather than stable fixation, bone malrotation can easily occur, resulting in severe loss in hand prehensile function. However, whether bone plate fixation or only lag screw fixation is more preferable remains unclear. Few studies have evaluated whether screw fixation can provide biomechanical fixation strength similar to bone plate fixation.

Objective

We assessed the difference in fixation strength between fixtation with two lag screws and bone plate for oblique metacarpal shaft fractures.

Materials and methods

We created oblique metacarpal shaft fractures on 21 artificial bones and fixated them using (1) double lag screw (2LS group), (2) regular plate (RP group), or (3) locked plate (LP group). To obtain the force–displacement data, a cantilever bending test was conducted for each specimen through a material testing machine. One-way analysis of variance and a Tukey test were conducted to compare the maximum fracture force and stiffness of the three fixation methods.

Results

The maximum fracture force of the 2LS group (mean + SD: 153.6 ± 26.5 N) was significantly lower than that of the RP (211.6 ± 18.5 N) and LP (227.5 ± 10.0 N) groups (p < 0.001). However, no significant differences were discovered between the RP and LP groups. The coefficient of variation for the maximum fracture force of the 2LS group (17.3%) was more than twice as high as that of the RP (8.7%) and LP (4.4%) groups. In addition, the stiffness of the three fixation methods was similar.

Conclusion

Compared with bone plate fixation, double lag screw fixation yielded slightly lower maximum bearable fracture force but similar stiffness. Therefore, this technique could be used for treating oblique metacarpal shaft fractures. However, using double lag screw fixation alone is technically demanding and requires considerable surgical experiences to produce consistent results.

Long-Term Functional Results of Intra- and Extra-Articular Hand Fractures Treatment With Titanium Miniature Plates and Screws With Minimum Follow-Up of 24 Months

Introduction

The purpose of this study was to evaluate the long-term outcome of an extended range of hand fractures treated with titanium, low profile plates, and screws.

Materials and methods

This retrospective study included adult patients with at least one phalangeal and/or metacarpal fracture, treated with mini titanium plates and screws, between 2004-2016, in a single trauma center, that were followed-up for at least 24 months and with complete, intact medical records.

Results

90 patients (79 men and 11 women) with 114 hand (46 phalangeal, 68 metacarpal) fractures fulfilled the inclusion criteria. Thirty-two fractures were open (28.07%), 27 were intra-articular (23.68%), and 12 were both open and intra-articular fractures. The mean age of the patients was 36.02 years (range 17-75). Mean follow-up was 95.3 months (range 24 to 138). Open fractures had a reduced mean grip strength and total active motion. No difference was observed between intra-articular and extra-articular fractures (for grip strength and total active motion). Predictors of the final outcome included the severity of the initial injury (open vs closed) and not the anatomic location (intra- or extra-articular, metacarpal, or phalangeal) of the fracture.

Conclusions

Low-profile plates and screws can successfully be used to establish union and restore the alignment of the fractured bone while achieving a satisfactory clinical outcome, even in cases of open or intra-articular fractures.

Effect of Bicortical Interfragmentary Screw Size on the Fixation of Metacarpal Shaft Fractures: A 3-Dimensional-Printed Biomechanical Study

Purpose

Spiral metacarpal fractures fixed with 2 non-lagged, interfragmentary cortical screws were tested to failure. The effect of screw size (1.2 mm, 1.5 mm, 2.0 mm, and 2.3 mm) on construct strength was tested in 3-point bending.

Methods

Three-dimensional-printed metacarpal test models were reproduced from computed tomography scans to reduce the confounding variables of bone density and anatomy, often encountered when using cadavers.

Results

No significant difference was found between the screw sizes, and the peak failure force was similar. Drill bit fracture and deformation during the insertion of the smallest screw (1.2 mm) as well as model failure during the insertion of the largest screw (2.3 mm) were found in some cases.

Conclusions

Screws of 1.5 mm and 2.0 mm in diameter were of sufficient strength and did not have the issues encountered with smaller or larger screws. Concerns from previous authors regarding intraoperative fracture were consistent with the pre-testing failure of some 2.3-mm models.

Clinical Relevance

Screws of 1.5 mm or 2 mm appear adequate for the fixation of spiral fracture patterns in metacarpal shafts using bicortical non-lagged technique with a low risk of fixation complications.

Osteosynthesis of Phalangeal Fractures: Biomechanical Comparison of Kirschner Wires, Plates, and Compression Screws

PURPOSE

The aim of this study was to compare several osteosynthesis techniques (intramedullary headless compression screws, T-plates, and Kirschner wires) for distal epiphyseal fractures of proximal phalanges in a human cadaveric model.

METHODS

A total of 90 proximal phalanges from 30 specimens (index, ring, and middle fingers) were used for this study. After stripping off all soft tissue, a transverse distal epiphyseal fracture was simulated at the proximal phalanx. The 30 specimens were randomly assigned to 1 fixation technique (30 per technique), either a 3.0-mm intramedullary headless compression screw, locking plate fixation with a 2.0-mm T-plate, or 2 oblique 1.0-mm Kirschner wires. Displacement analysis (bending, distraction, and torsion) was performed using optical tracking of an applied random speckle pattern after osteosynthesis. Biomechanical testing was performed with increasing cyclic loading and with cyclic load to failure using a biaxial torsion-tension testing machine.

RESULTS

Cannulated intramedullary compression screws showed significantly less displacement at the fracture site in torsional testing. Furthermore, screws were significantly more stable in bending testing. Kirschner wires were significantly less stable than plating or screw fixation in any cyclic load to failure test setup.

CONCLUSIONS

Intramedullary compression screws are a highly stable alternative in the treatment of transverse distal epiphyseal phalangeal fractures. Kirschner wires seem to be inferior regarding displacement properties and primary stability.

CLINICAL RELEVANCE

Fracture fixation of phalangeal fractures using plate osteosynthesis may have the advantage of a very rigid reduction, but disadvantages such as stiffness owing to the more invasive surgical approach and soft tissue irritation should be taken into account. Headless compression screws represent a minimally invasive choice for fixation with good biomechanical properties.

A comparative study of functional outcome of treatment of intra articular fractures of distal radius fixed with percutaneous Kirschner's wires vs T-plate

BACKGROUND & OBJECTIVE

Fractures of the distal radius are common with a variable prognosis in case of intra articular extension. The available options include Plaster, External fixation, Prefabricated Splintage using Ligamentotaxis, K-wire fixation, and open reduction internal fixation with T-plate without an as yet clear advantage of one over the others. If these fractures are allowed to collapse, radial shortening, angulation and articular incongruity may cause permanent deformity and loss of function. This limited small scale study was intended to compare the functional results of treatment of these fractures with a T plate and K-wires.

METHODS

This was a prospective experimental study conducted at department of Orthopedics of PGMI/Lahore General Hospital, Lahore. Total 30 patients were included and randomized into two groups of 15 patients each. Group-A patients were treated with Krischner's wires and Group-B patients were treated with a T-Plate with open reduction. Informed consent was taken. Post operative follow up was done for 12 weeks for the outcome parameters (Green and O'Brien score).

RESULTS

Mean age of patients in Group-A and B was 36.13±9.81 and 44.73±7.86 years respectively. In Group-A there were 10 male and 5 female patients and in Group-B there were 8 male and seven female patients respectively. In Group-A nine patients presented with Fernandez type-II and six patients presented with Fernandez type-III fracture. While in Group-B 10 patients presented with Fernandez type-II and five patients presented with Fernandez type-III fracture. Among Group-A patient's final outcome was excellent in 86.67% patients while in Group-B only 53.33% patients had excellent outcome at three months follow up.

CONCLUSION

Percutaneous Kirschner's wires appeared to be more effective as compared to T-Plate fixation in terms of functional outcome for treating intra-articular distal radius fractures.

Minimally invasive surgical treatment for unstable fractures of the proximal phalanx: intramedullary screw

OBJECTIVE

To analyze the clinical-functional parameters and quality of life of patients undergoing minimally invasive surgical treatment for extra-articular fractures of the proximal phalanx, using an intramedullary screw (Acutrak(®)).

METHODS

Between January 2011 and September 2014, a prospective study was conducted on 41 patients (48 fingers) with unstable extra-articular fractures of the proximal phalanx, who underwent minimally invasive surgical treatment using an intramedullary screw (Acutrak(®)). These patients were evaluated 12 months after the surgery by means of the DASH quality-of-life questionnaire, VAS pain scale, measurement of range of motion (ROM, in degrees) and radiographic assessment.

RESULTS

All the patients achieved adequate reduction and consolidation of their fractures. There were statistically significant improvements in quality of life on the DASH scale, pain on the VAS scale and range of motion.

CONCLUSION

The minimally invasive technique for treating unstable extra-articular fractures of the proximal phalanx using an intramedullary screw (Acutrak(®)) is effective and safe, and it presents satisfactory clinical-functional results.

Comparison of Clinical Outcomes of Phalangeal Fracture Treated with Dorsolateral Approach or Post-middle Approach Using AO Mini Titanium Plate

The aim of this study is to investigate the clinical outcomes of various fixation methods for proximal phalangeal fractures with Arbeitsgemeinschaft für Osteosynthesefragen (AO) mini titanium plate by dorsolateral approach or post-middle approach. Clinical results of 62 fingers of 53 patients with proximal phalangeal fracture were evaluated. For dorsolateral approach, the lateral bundle of the extensor tendon was drawn away to expose the fracture part of the bone. After reduction, the plate was located at the dorsolateral side of the bone. For post-middle approach, the extensor tendon was split to expose the fracture part of the bone. After reduction, the plate was fixed to the proximal phalangeal side of the bone, and the extensor tendon was repaired with 3-0 nonabsorbable silk sutures. We found low overall complication rates in both groups. The mean total active motion (TAM) for the dorsolateral group and post-middle group was 234.60° ± 22.63° and 221.08° ± 25.69°, respectively. There was a statistical significance between the two groups (P = 0.037 < 0.05), indicating that TAM was notably affected by various fixation methods. With AO mini titanium plate, movement in dorsolateral approach group was significantly higher than in post-middle approach group. Dorsolateral approach is an acceptable technique of incision for proximal phalangeal fractures.

Comparison of treatment of oblique and spiral metacarpal and phalangeal fractures with mini plate plus screw or screw only

INTRODUCTION

We aimed to compare results of treatment of oblique-spiral metacarpal and phalangeal fractures with screw only or mini plate plus screw, respectively.

METHODS

A total of 43 patients who were operated with a diagnosis of displaced, irreducible, unstable, rotational oblique-spiral metacarpal and proximal phalangeal fracture between 2007 and 2010 were included in this study. The mean age of patients with a phalangeal fracture was 33.8 years (range 20-50 years; 4 females, 18 males), and the mean age of patients with a metacarpal fracture was 29.6 years (range 18-45 years; 3 females, 18 males). Mini plate plus screw or screw only was used for internal fixation of these fractures. The patients were followed up for 19.2 ± 5.4 months in the phalangeal fracture group and 20.9 ± 7.3 months in metacarpal fracture group. Of the metacarpal fractures, 14 were oblique and 10 spiral, whereas 14 of the phalangeal fractures were oblique and 8 spiral. The patients were evaluated according to total range of motion of the finger, grasping strength and Q-DASH score.

RESULTS

For patients treated with mini plate plus screw after metacarpal and phalangeal fractures, the time to return to work was significantly shorter in comparison to patients treated with screws only. There was no significant difference between patients with metacarpal fractures treated with mini plate plus screw and patients treated with screw only in terms of total range of motion and Q-DASH results at last on control examination, while results of patients with phalangeal fractures treated with screw only were significantly better. There was no significant difference between these two treatments in phalangeal fractures in terms of grasping strength of the finger in early (1st month) and late (last control examination), whereas patients with metacarpal fractures treated with mini plate plus screw reached higher grasping strength earlier.

CONCLUSION

Treatment with mini plate plus screw should be avoided in spiral and oblique phalangeal fractures, and fixation should be done with screw only with a short surgical incision and dissection. On the other hand, treatment with mini plate plus screw should be preferred in patients with spiral and oblique metacarpal fractures, especially in those who work in occupations requiring higher physical strength.

Biomechanical evaluation of metacarpal fracture fixation: application of a 90° internal fixation model

PURPOSE

Complications in metacarpal fracture treatment increase in proportion to the severity of the initial injury and the invasiveness of the surgical fixation technique. This manuscript evaluates the feasibility of minimizing internal fixation construct size and soft tissue dissection, while preserving the advantages of stable internal fixation in a biomechanical model. We hypothesized that comparable construct stability could be achieved with mini-plates in an orthogonal (90/90) configuration compared with a standard dorsal plating technique.

METHODS

This hypothesis was evaluated in a transverse metacarpal fracture model. Twelve metacarpals were subject to either placement of a 2.0-mm six-hole dorsal plate or two 1.5-mm four-hole mini-plates in a 90/90 configuration. These constructs were tested to failure in a three-point bending apparatus, attaining failure force, displacement, and stiffness.

RESULTS

Mean failure force was 353.5 ± 121.1 N for the dorsal plating construct and 358.8 ± 77.1 N for the orthogonal construct. Mean failure displacement was 3.3 ± 1.2 mm for the dorsal plating construct and 4.1 ± 0.9 mm for the orthogonal construct. Mean stiffness was 161.3 ± 50.0 N/mm for the dorsal plating construct and 122.1 ± 46.6 N/mm for the orthogonal construct. Mean failure moment was 3.09 ± 1.06 Nm for the dorsal plating construct and 3.14 ± 0.67 Nm for the orthogonal construct. The dorsal plating group failed via screw pullout, whereas the orthogonal failed either by screw pullout or breakage of the plate.

CONCLUSIONS

When subject to apex dorsal bending, the orthogonal construct and the standard dorsal plate construct behaved comparably. These data suggest that despite its shorter length, lower profile, and less substantial screws, the orthogonal construct provides sufficient rigidity.

CLINICAL RELEVANCE

This study represents a "proof of concept" regarding the applicability of orthogonal plating in the metacarpal and provides the foundation for minimizing construct size and profile.

Long-term follow-up of unoperated, nonscissoring spiral metacarpal fractures

BACKGROUND

Spiral metacarpal fractures can result in shortening of the metacarpal shaft, which may lead to extension lag at the metacarpophalangeal joint and reduced grip strength. These fractures have been surgically treated to restore metacarpal length; however, there are complications associated with surgery, postoperative management and wound healing, which further threaten power recovery in the hand.

OBJECTIVE

To determine the effect of conservative management of un-operated, nonscissoring spiral metacarpal fractures.

METHODS

Sixty-one consecutive patients presenting with nonscissoring spiral metacarpal fractures were treated nonoperatively and studied prospectively to determine the natural history of their power outcome. Thumb fractures and those requiring surgical intervention for scissoring were excluded.

RESULTS

Follow-up data of a minimum of five months (mean follow-up 87 weeks) were available for 13 patients. Mean grip strength at final follow-up was 36.18 kg on the uninjured side and 36.58 kg on the injured side. The strength-difference values did not differ significantly from zero (P=0.72).

CONCLUSION

The loss of metacarpal length associated with these fractures may not cause a power deficit sufficiently large to significantly affect grip strength and functional recovery in the hand. A prospective randomized controlled trial of operated versus unoperated, nonscissoring metacarpal fractures is warranted.

Long-term follow-up of unoperated, nonscissoring spiral metacarpal fractures

Background

Spiral metacarpal fractures can result in shortening of the metacarpal shaft, which may lead to extension lag at the metacarpophalangeal joint and reduced grip strength. These fractures have been surgically treated to restore metacarpal length; however, there are complications associated with surgery, postoperative management and wound healing, which further threaten power recovery in the hand.

Objective

To determine the effect of conservative management of unoperated, nonscissoring spiral metacarpal fractures.

Methods

Sixty-one consecutive patients presenting with nonscissoring spiral metacarpal fractures were treated nonoperatively and studied prospectively to determine the natural history of their power outcome. Thumb fractures and those requiring surgical intervention for scissoring were excluded.

Results

Follow-up data of a minimum of five months (mean follow-up 87 weeks) were available for 13 patients. Mean grip strength at final follow-up was 36.18 kg on the uninjured side and 36.58 kg on the injured side. The strength-difference values did not differ significantly from zero (P=0.72).

Conclusion

The loss of metacarpal length associated with these fractures may not cause a power deficit sufficiently large to significantly affect grip strength and functional recovery in the hand. A prospective randomized controlled trial of operated versus unoperated, nonscissoring metacarpal fractures is warranted.

Comparison between Intramedullary Nailing and Percutaneous K-Wire Fixation for Fractures in the Distal Third of the Metacarpal Bone

Background

To compare clinical and radiographic outcomes between intramedullary nail fixation and percutaneous K-wire fixation for fractures in the distal third portion of the metacarpal bone.

Methods

A single-institutional retrospective review identified 41 consecutive cases of metacarpal fractures between September 2009 and August 2013. Each of the cases met the inclusion criteria for closed, extra-articular fractures of the distal third of the metacarpal bone. The patients were divided by the method of fixation (intramedullary nailing or K-wire). Outcomes were compared for mean and median total active motion of the digit, radiographic parameters, and period until return to work. Complications and symptoms were determined by a questionnaire.

Results

During the period under review, 41 patients met the inclusion criteria, and the fractures were managed with either intramedullary nailing (n=19) or percutaneous K-wire fixation (n=22). The mean and median total active range of motion and radiographic healing showed no statistically significant difference between the two groups. No union failures were observed in either group. The mean operation time was shorter by an average of 14 minutes for the percutaneous K-wire fixation group. However, the intramedullary nailing group returned to work earlier by an average of 2.3 weeks. Complications were reported only in the K-wire fixation group.

Conclusions

Intramedullary nailing fixation is advisable for fractures in the distal third of the metacarpal bone. It provides early recovery of the range of motion, an earlier return to work, and lower complication rates, despite potentially requiring a wire removal procedure at the patient's request.

Non-surgical management of metacarpal fractures

Metacarpal fractures are among the most common fractures of the upper extremity. Surgical management is generally offered for unstable or significantly displaced fractures. A more conservative, nonsurgical approach, however, may provide safe, rapid recovery while maintaining normal active range of motion. This article reviews the nonsurgical approach, protocols, and outcomes of metacarpal fractures.

Extra-articular fractures of the digital metacarpals and phalanges of the long fingers

Metacarpal and phalangeal fractures of the long fingers are the result of trauma occurring under extremely varied circumstances. As a consequence, the clinical presentation varies greatly, with every bone and joint potentially being involved. Each step of their treatment is crucial, although the benign appearance of these injuries can lead to steps being missed: diagnostic phase with clinical examination and radiographs; therapeutic phase where the most suitable treatment is chosen, which combines mobilization of the digital chains as soon as possible and in every patient; follow-up phase with regular monitoring to detect any complications, especially secondary displacement, and verify that good progress is being made during rehabilitation. The goal of any fracture treatment is to preserve or restore the anatomy, with the emphasis here being on the stability and mobility of the digital chains. The potential progression towards serious functional sequelae (pain, instability or stiffness in hand) and the resulting significant socio-economic repercussions must be at the forefront of a surgeon's mind early on during the initial care of any finger or hand trauma.

Modified retrograde percutaneous intramedullary multiple Kirschner wire fixation for treatment of unstable displaced metacarpal neck and shaft fractures

The purpose of this prospective study was to evaluate the functional and radiographic outcomes of our new surgical technique, retrograde percutaneous intramedullary multiple Kirschner wire (K-wire) fixation, for the treatment of unstable displaced metacarpal neck or shaft fractures. Between March 2005 and April 2010, 56 consecutive patients with 65 metacarpal fractures were treated with closed reduction and retrograde intramedullary fixation with at least 2 K-wires. The average follow-up duration was 13 months. The clinical outcome was assessed by the total active motion (TAM) of the digit, presence of rotational deformity, grip strength, patient satisfaction, and Disabilities of the Arm, Shoulder, and Hand (DASH) score. The radiographic outcome was assessed by the time to union, dorsal angulation, and shortening. The average operating time was 11 min (range, 6-17 min) for isolated single metacarpal fractures and 18 min (range, 13-25 min) for isolated simultaneous 2-metacarpal fractures. There was no significant difference in the average TAM of the digit between the injured and uninjured hands in both neck and shaft fractures. Four patients developed extensor tendon irritation during follow-up, but the irritations disappeared completely after removal of the wires, and there was no need to perform tenolysis. The average DASH score was 8.7 (range, 0-21). Radiographic union was achieved in all patients at a mean of 5.2 weeks. Radiographic assessment revealed a significant reduction in the average dorsal angulation to 8° (SD, 2) in neck fractures and to 4° (SD, 2) in shaft fractures postoperatively. The average shortening was corrected significantly to 1 mm (SD, 2) in neck fractures and to -1 mm (SD, 2) in shaft fractures postoperatively. Based on our experience, our retrograde intramedullary K-wire fixation technique is an acceptable alternative modality for the treatment of unstable displaced metacarpal fractures. This straightforward technique can facilitate early hand mobilization, correct the deformity, and provide good clinical and radiographic outcomes.

Open reduction and cerclage wire fixation for long oblique/spiral fractures of the proximal phalanx of the fingers

Fifteen cases of long oblique/spiral fractures of the shaft of the proximal phalanx of the fingers treated by open reduction, cerclage wire fixation and immediate postoperative mobilisation were studied prospectively. Twelve patients presented early (within 24 hour of injury) and the remaining three cases were treated initially elsewhere by closed reduction and percutaneous oblique K-wire fixation with failure of the fixation. The latter three patients presented to our clinic late (10-14 days after injury). Following internal fixation with cerclage wires, no cases of infection, complex regional pain syndrome (CRPS) Type 1, fracture re-displacement, wire migration or extrusion were noted. One patient complained of a palpable wire which was removed 4 months after surgery. All fractures united and all patients returned to work at a mean of 8 (range 7-11) weeks after surgery. Twelve patients obtained a full range of motion (total active motion-TAM = 260 degrees ) and the remaining three patients had a mild (5-15 degrees ) flexion contracture of the proximal interphalangeal joint. Cerclage wire fixation is an acceptable technique of fixation for these fractures.