Citraconylation and maleylation on the catalytic and thermodynamic properties of raw starch saccharifying amylase from Aspergillus carbonarius

Gama rays mediated improvement of catalytic efficiency and thermostability of glucoamylase by replacing active site leucine to isoleucene from super koji (Aspergillus oryzae)

Glucoamylase is considered as an essential enzyme in food industry. However, lowere catalytic efficiency and weak thermostability confine its application in food industry. Therefore, the current study was aimed to improve catalytic efficiency and thermostability of glucoamylase by replacing active site leucine to isoleucene from Super Koji (Aspergillus oryzae) using gama rays mediated point mutation. High catalytic efficiency and thermostability of glucoamylase from mutant Aspergillus oryzae M-60(5) (screened from 51 mutants) was achieved due to a point mutation, i.e., Leu203 → lle in active site. The SDS-PAGE molecular mass of parent and mutant glucoamylase was 63.1 kDa, while mutant glucoamylase showed; productivity =  9.7 U ml‒1, kinetic constants kcat = 118 (1.62 fold), (kcat/Km) = 1899 (4.75 fold) and half-life at 55 °C for 45 min (1.92 fold). Thermodynamics parameters for starch hydrolysis of parent glucoamylase were; ΔH*= 47.755 kJ mol‒1 and ΔG*= 67.975 kJ mol‒1 while for mutant ΔH*= 44.263kJ mol‒1 and ΔG*= 66.514 kJ mol‒1. The ΔG* of irreversible thermostability for parent and mutant at 55 °C was 104.95 kJ mol‒1 and 101.52 kJ mol‒1respectively. The point mutation altered the conformation of the glucoamylase active site that contributed to improve the functional energy (ΔG*), resulted the stabilization of transition state which made it thermostable and highly efficient in starch hydrolysis.

Altering the Properties of Laccases from Ensifer meliloti (Sinorhizobium meliloti) and Cerrena unicolor by Chemical Modifications of Proteins

Due to their catalytic performance, laccases constitute one of the most promising groups of enzymes for potential applications in modern biotechnology. In this study, we aimed to chemically modify Ensifer meliloti (Sinorhizobium meliloti) and Cerrena unicolor laccase and comparatively characterize the structures of both enzymes. The most characteristic feature was the spatial localization of lysine residues, predominantly positioned distal to the active site region for both compared enzymes. The solvent-accessible surface area (SASA) analysis showed that bacterial laccase was characterized by a larger hydrophobic SASA than the fungal enzyme. The pKa prediction identified only one Lys in the E. meliloti laccase structure susceptible to modification. Modifications were achieved by using mono- and bifunctional crosslinking agents, and glycosylations were also performed. The degree of protein modification ranged from 0% for glucose- and galactose-modified E. meliloti laccase and citraconic anhydride-modified (CA) C. unicolor laccase to 62.94% for the palmitic acid N-hydroxysuccinimide ester-modified E. meliloti enzyme. The stability of covalently modified laccases over a wide pH and temperature ranges and in the presence of inhibitors was investigated. Protein modifications with polymeric sucrose (PS) and ethylene glycol bis-(succinimidyl succinate) (EGNHS) significantly increased the activity of the bacterial and fungal laccases by 15 and 19%, respectively. Although pH optima remained relatively unchanged by modifications, certain variants, especially CA-modified bacterial protein and EGNHS-modified C. unicolor enzyme, exhibited improved stability at near-neutral pH (6-7). Modification of the bacterial enzyme with glutaraldehyde-carbodiimide (GA-CDI-ver) and of the fungal enzyme with CA was the most effective in improving its thermal stability. Chemical modifications using GA, CDI, GA-CDI, and PS allowed E. meliloti L 3.8 laccase to retain full activity in the presence of 5 mM NaI, whereas CA-, PS-, and EGNHS-modified C. unicolor variants retained their activity even at elevated NaCl concentrations. The results clearly demonstrate that the outcome of chemical modifications is closely linked to enzyme-specific structural features and that selecting an appropriate modification strategy is critical to achieving the desired effect.

Challenges and prospects of microbial α-amylases for industrial application: a review

α-Amylases are essential biocatalysts representing a billion-dollar market with significant long-term global demand. They have varied applications ranging from detergent, textile, and food sectors such as bakery to, more recently, biofuel industries. Microbial α-amylases have distinct advantages over their plant and animal counterparts owing to generally good activities and better stability at temperature and pH extremes. With the scope of applications expanding, the need for new and improved α-amylases is ever-growing. However, scaling up microbial α-amylase technology from the laboratory to industry for practical applications is impeded by several issues, ranging from mass transfer limitations, low enzyme yields, and energy-intensive product recovery that adds to high production costs. This review highlights the major challenges and prospects for the production of microbial α-amylases, considering the various avenues of industrial bioprocessing such as culture-independent approaches, nutrient optimization, bioreactor operations with design improvements, and product down-streaming approaches towards developing efficient α-amylases with high activity and recyclability. Since the sequence and structure of the enzyme play a crucial role in modulating its functional properties, we have also tried to analyze the structural composition of microbial α-amylase as a guide to its thermodynamic properties to identify the areas that can be targeted for enhancing the catalytic activity and thermostability of the enzyme through varied immobilization or selective enzyme engineering approaches. Also, the utilization of inexpensive and renewable substrates for enzyme production to isolate α-amylases with non-conventional applications has been briefly discussed.

Maleic anhydride-modified xylanase and its application to the clarification of fruits juices

At presently, the catalytic activity of xylanase is sub-optimal, and the required reaction conditions are harsh. To improve its catalytic activity and stability, xylanase (XY) was chemically modified with maleic anhydride (MA). The enzymatic properties of this maleic anhydride-modified xylanase (MA-XY) were then evaluated and analyzed spectroscopically. The results showed that the thermal stability, use of organic solvents, storage stability and the pH range of 3.0 to 9.0 for MA-XY were better than that for XY alone. The kinetic parameters of the enzyme (Km values) decreased from 40.63 to 30.23 mg/mL. Spectroscopic analysis showed that XY had been modified by the acylation reaction to become a tertiary structure. An assay based on clarifying fruit juices showed that the clarification capacity and reducing sugar content using MA-XY increased compared with those using XY. Overall, this study provides a theoretical basis for improving the application of XY in the food industry.

Distribution of Aromatic Amino Acid Residues in Substrate-Binding Regions Modulates Substrate Specificity of Microbial Debranching Enzymes

Debranching enzymes (DBEs) directly hydrolyze α-1,6-glucosidic linkages in glycogen, starch, and related polysaccharides, making them important in the starch processing industry. However, the ambiguous substrate specificity usually restricts synergistic catalysis with other amylases for improving starch utilization. Herein, a glycogen-debranching enzyme from Saccharolobus solfataricus (SsGDE) and two isoamylases from Pseudomonas amyloderamosa (PaISO) and Chlamydomonas reinhardtii (CrISO) were used to investigate the molecular mechanism of substrate specificity. Along with the structure-based computational analysis, the aromatic residues in the substrate-binding region of DBEs played an important role in binding substrates. The aromatic residues in SsGDE appeared clustered, contributing to a small substrate-binding region. In contrast, the aromatic residues in isoamylase were distributed dispersedly, forming a large active site. The distinct characteristics of substrate-binding regions in SsGDE and isoamylase might explain their substrate preferences for maltodextrin and amylopectin, respectively. By modulating the substrate-binding region of SsGDE, variants Y323F and V375F were obtained with significantly enhanced activities, and the activities of Y323F and V375F increased by 30 and 60% for amylopectin, and 20 and 23% for DE4 maltodextrin, respectively. This study revealed the molecular mechanisms underlying the substrate specificity for SsGDE and isoamylases, providing a route for engineering enzymes to achieve higher catalytic performance.

Investigation into the chemical modification of α-amylase using octenyl succinic anhydride: enzyme characterisation and stability studies

The present study describes the chemical modification of α-amylase using succinic anhydride (SA), phthalic anhydride (PA) and a novel modifier viz. 2-octenyl succinic anhydride (2-OSA). SA-, PA- and 2-OSA-α-amylases displayed a 50%, 91% and 46% increase in stability at pH 9, respectively; as compared to unmodified α-amylase. PA-α-amylase showed a significant increase in Ea and ΔH_a^#, and a concomitant decrease in ΔS_a^#. The modified α-amylases exhibited improved thermostability as reflected by significant reductions in K_d and ΔS_d^#, and increments in t_1/2, D-, E_d, ΔH_d^# and ΔG_d^# values. The modified α-amylases displayed variable stabilities in the presence of different surfactants, inhibitors, metal ions and organic solvents. Interestingly, the chemical modification was found to confer resistance against inactivation by Hg²⁺ on α-amylase. The conformational changes in modified α-amylases were investigated using intrinsic tryptophan fluorescence, ANS (extrinsic) tryptophan fluorescence, and dynamic fluorescence quenching. Both intrinsic and extrinsic tryptophan fluorescence spectra showed increased fluorescence intensity for the modified α-amylases. Chemical modification was found to induce a certain degree of structural rigidity to α-amylase, as shown by dynamic fluorescence quenching. Analysis of the CD spectra by the K2d method using the DichroWeb online tool indicated evident changes in the α-helix, β-sheet and random coil fractions of the α-amylase secondary structure, following chemical modification using anhydrides. PA-α-amylase exhibited the highest productivity in terms of hydrolysis of starch at 60 °C over a period of 5 h indicating potential in varied biotechnological applications.

Chemical modification for improving catalytic performance of lipase B from Candida antarctica with hydrophobic proline ionic liquid

In this study, a series of proline ionic liquids with different lengths of hydrophobic alkyl on the side chain were used to modify the Candida Antarctic lipase B (CALB). The catalytic activity, thermal stability and tolerance to methanol and DMSO of the modified enzyme were all improved simultaneously. The optimum temperature changed from 55 to 60 ℃. The hydrophobicity and anion type of the modifier have important influence on the catalytic performance of CALB. CALB modified by [ProC₁₂][H₂PO₄] has a better effect. Under the optimal conditions, its hydrolysis activity was 3.0 times than that of the native enzyme, the catalytic efficiency Kcat/Km improved 2.8 times in aqueous phase, and the tolerance to organic solvent with strong polarity (50% methanol 2 h) was increased by 6.8 times. Fluorescence spectra and circular dichroism (CD) spectroscopy showed that the introduction of ionic liquids changed the microenvironment near the fluorophores of the enzyme protein, the α-helix decreased and β-sheet increased in the secondary structure of the modified enzymes. The root mean square deviation (RMSD), residue root mean square fluctuation (RMSF), radius of gyration (Rg), and solution accessible surface area (SASA) of [ProC₂][Br]-CALB, [ProC₁₂][Br]-CALB and native CALB were obtained for comparison by molecular dynamics simulation. The results of dynamics simulation were in good agreement with enzymology experiment. The introduction of ionic liquids can keep CALB in a better active conformation, and proline ionic liquids with long hydrophobic chains can significantly improve the surface hydrophobicity and overall rigidity of CALB. This research offers a new idea for rapid screening of efficient modifiers and provision of enzymes with high stability and activity for industrial application.

Protein Modifications: From Chemoselective Probes to Novel Biocatalysts

Chemical reactions can be performed to covalently modify specific residues in proteins. When applied to native enzymes, these chemical modifications can greatly expand the available set of building blocks for the development of biocatalysts. Nucleophilic canonical amino acid sidechains are the most readily accessible targets for such endeavors. A rich history of attempts to design enhanced or novel enzymes, from various protein scaffolds, has paved the way for a rapidly developing field with growing scientific, industrial, and biomedical applications. A major challenge is to devise reactions that are compatible with native proteins and can selectively modify specific residues. Cysteine, lysine, N-terminus, and carboxylate residues comprise the most widespread naturally occurring targets for enzyme modifications. In this review, chemical methods for selective modification of enzymes will be discussed, alongside with examples of reported applications. We aim to highlight the potential of such strategies to enhance enzyme function and create novel semisynthetic biocatalysts, as well as provide a perspective in a fast-evolving topic.

Chemical modification of enzymes to improve biocatalytic performance

Improvement in intrinsic enzymatic features is in many instances a prerequisite for the scalable applicability of many industrially important biocatalysts. To this end, various strategies of chemical modification of enzymes are maturing and now considered as a distinct way to improve biocatalytic properties. Traditional chemical modification methods utilize reactivities of amine, carboxylic, thiol and other side chains originating from canonical amino acids. On the other hand, noncanonical amino acid- mediated 'click' (bioorthogoal) chemistry and dehydroalanine (Dha)-mediated modifications have emerged as an alternate and promising ways to modify enzymes for functional enhancement. This review discusses the applications of various chemical modification tools that have been directed towards the improvement of functional properties and/or stability of diverse array of biocatalysts.

Recent Advances in Biocatalysis with Chemical Modification and Expanded Amino Acid Alphabet

The two main strategies for enzyme engineering, directed evolution and rational design, have found widespread applications in improving the intrinsic activities of proteins. Although numerous advances have been achieved using these ground-breaking methods, the limited chemical diversity of the biopolymers, restricted to the 20 canonical amino acids, hampers creation of novel enzymes that Nature has never made thus far. To address this, much research has been devoted to expanding the protein sequence space via chemical modifications and/or incorporation of noncanonical amino acids (ncAAs). This review provides a balanced discussion and critical evaluation of the applications, recent advances, and technical breakthroughs in biocatalysis for three approaches: (i) chemical modification of cAAs, (ii) incorporation of ncAAs, and (iii) chemical modification of incorporated ncAAs. Furthermore, the applications of these approaches and the result on the functional properties and mechanistic study of the enzymes are extensively reviewed. We also discuss the design of artificial enzymes and directed evolution strategies for enzymes with ncAAs incorporated. Finally, we discuss the current challenges and future perspectives for biocatalysis using the expanded amino acid alphabet.