Disentangling multiple PM emission sources in the Po Valley (Italy) using honey bees

The use of honey bees (Apis mellifera L.) to monitor airborne particulate matter and assess health effects on pollinators

The honey bee Apis mellifera has long been recognized as an ideal bioindicator for environmental pollution. These insects are exposed to pollutants during their foraging activities, making them effective samplers of environmental contaminants, including heavy metals, pesticides, radionuclides, and volatile organic compounds. Recently, it has been demonstrated that honey bees can be a valuable tool for monitoring and studying airborne PM pollution, a complex mixture of particles suspended in the air, known to have detrimental effects on human health. Airborne particles attached to the bees can be characterised for their morphology, size, and chemical composition using a scanning electron microscopy coupled with X-ray spectroscopy, thus providing key information on the emission sources of the particles, their environmental fate, and the potential to elicit inflammatory injury, oxidative damage, and other health effects in living organisms. Here, we present a comprehensive summary of the studies involving the use of honey bees to monitor airborne PM, including the limits of this approach and possible perspectives. The use of honey bees as a model organism for ecotoxicological studies involving pollutant PM is also presented and discussed, further highlighting the role of the bees as a cornerstone of human, animal, and environmental health, according to the principles of the "One Health" approach.

Environmental pollution effect on honey bees and their derived products: a comprehensive analysis

Several factors, including environmental degradation, air pollution, intense urbanization, excessive agriculture, and climate change, endanger the well-being of animals and plants. One of the major issues with an increasingly negative impact is agricultural contamination with pesticides and antibiotics. Seed coatings with neonicotinoid insecticides used as a protective layer against pests are shown to exceed the permissible limits in most cases. Neonicotinoid compounds bind to nicotinic acetylcholine receptors, therefore affecting the honey bees' brain. Heavy metals in higher concentrations are lethal for honey bees, and the residue in bee products might pose a threat to human health. Highly effective acaricides used to treat Varroa destructor infestations in honey bee colonies have negative effects on honey bee reproduction, olfaction, and honey production. Furthermore, amitraz and fluvalinate are mostly found in the highest amounts and lead to decreased honey production and reduced colony reproduction, along with decreased learning ability and memory. However, scientific studies have shown that honey bees act as a reliable bio-indicator of environmental pollution. In response to the growing demand for bee products, the effects of adulteration and improper storage conditions have gotten worse and represent a new risk factor. In light of the shifting global economy, it is important to analyze consumer expectations and adjust manufacturing accordingly. By ensuring the manufacture of high-quality, traceable products devoid of drug residues, consumers will be better protected from subsequent health problems. This review's objectives are based on the necessity of identifying the risks associated with honey bees and bee products.

Air pollution modifies colonisation factors in beneficial symbiont Snodgrassella and disrupts the bumblebee gut microbiome

Particulate air pollutants, a major air pollution component, are detrimental to human health and a significant risk to wildlife and ecosystems globally. Here we report the effects of particulate pollutant black carbon on the beneficial gut microbiome of important global insect pollinator, the buff-tailed bumblebee (Bombus terrestris). Our data shows that exposure to black carbon particulates alters biofilm structure, gene expression and initial adhesion of beneficial bee gut coloniser, Snodgrassella alvi. Exposure of adult Bombus terrestris to non-toxic black carbon particulates significantly increased viable bacteria on MRS agar and 16S absolute abundance of beneficial bacteria Bombilactobacillus in Post-treated bumblebees compared to Pre-treated, demonstrating disruption of the bumblebee gut microbiome. These findings show that black carbon exposure has direct, measurable effects on bees' beneficial commensal bacteria and microbiome. Together these data highlight that black carbon, a single type of particulate pollution, is an underexplored risk to insect pollinator health.

Biomonitoring of particulate matter and volatile organic compounds using honey bees and their products. A contemporary overview

Airborne pollutants like particulate matter and volatile organic compounds can negatively impact microbial, plant, and animal life as well as human health. Traditional environmental monitoring, while crucial, often relies on expensive equipment at limited locations, leading to gaps in geographical coverage. To obtain a low-cost, easily deployed environmental monitoring grid, the use of European honey bees (Apis mellifera) as biomonitor can offer a promising alternative. Their extensive foraging in the landscape exposes them to environmental contaminants like particulate matter and organic compounds. Once collected, these pollutants are carried back into the hives, where they can subsequently be sampled and quantified using various techniques. This potentially makes honey bee colonies a cost-effective and valuable long-term monitoring tool for particulate matter and organic compounds. This review, through the critical insight of the most recent pertinent literature, explores the suitability of honey bees and their products as biomarkers for environmental monitoring of these pollutants, addressing sample preparation approaches and chemical analytical methods. Overall, the presented information will aid researchers in initiating further investigations in this pivotal field, incorporating additional chemicals and innovative, non-invasive sampling matrices compatible with the beehive environment.

Tracking fine particles in urban and rural environments using honey bees as biosamplers in Mexico

This work explores the efficiency of honey bees (Apis mellifera) as biosamplers of metal pollution. To understand this, we selected two cities with different urbanization (a medium-sized city and a megacity), and we collected urban dust and honey bees captured during flight. We sampled two villages and a university campus as control areas. The metal content in dust was analyzed by inductively coupled plasma mass spectrometry (ICP-MS). Atomic Force Microscopy (AFM) and Scanning electron microscopy (SEM) were used to investigate the shape and size distribution of the particles, and to characterize the semiquantitative chemical composition of particles adhered to honey bee's wings. Principal Component Analysis (PCA) shows a distinctive urban dust geochemical signature for each city, with component 1 defining V-Cr-Ni-Tl-Pt-Pb-Sb as characteristic of Mexico City and Ce-As-Zr for dust from Hermosillo. Particle count using SEM indicates that 69% and 63.4% of the resuspended dust from Hermosillo and Mexico City, respectively, corresponds to PM2.5. Instead, the particle count measured on the honey bee wings from Hermosillo and Mexico City is mainly PM2.5, 91.4% and 88.9%, respectively. The wings from honey bees collected in the villages and the university campus show much lower particle amounts. AFM-histograms confirmed that the particles identified in Mexico City have even smaller sizes (between 60 and 480 nm) than those in Hermosillo (between 400 and 1400 nm). Particles enriched in As, Zr, and Ce mixed with geogenic elements such as Si, Ca, Mg, K, and Na dominate honey bee' wings collected in Hermosillo. In contrast, those particles collected from Mexico City contain V, Cr, Ni, Tl, Pt, Pb, and Sb. Such results agree with the urban dust data. This work shows that honey bees are suitable biosamplers for the characterization of fine dust fractions by microscopy techniques and reflect the urban pollution of the sites.

Using honey bee colonies to monitor phenotypic and genotypic resistance to colistin

Colistin is a polymyxin antimicrobic mainly used to treat infection caused by multi-drug resistant Gram-negative bacteria. Mechanisms of colistin resistance are linked to the mobile colistin resistance (mcr) genes, which are transferable within mobile plasmids. Currently, there is limited research on the environmental dissemination of these genes. The behavioural and morphological characteristics of Apis mellifera L. make honey bees effective environmental bioindicators for assessing the prevalence of antimicrobial-resistant bacteria. This study aims to evaluate the colistin phenotypic and genotypic resistance in environmental Gram-negative bacteria isolated from foraging honey bees, across a network of 33 colonies distributed across the Emilia-Romagna region in Italy. Phenotypic resistances were determined through a microdilution assay using the minimum inhibitory concentration (MIC) with dilutions ranging from 0.5 μg/ml to 256 μg/ml. Strains with MIC values gather than 2 μg/ml were classified as resistant. Also, the identification of the nine mcr genes was carried out using two separate multiplex PCR assays. The study found that 68.5% of isolates were resistant and the genus with the higher resistance rates observed in Enterobacter spp. (84.5%). At least one mcr gene was found in 137 strains (53.3%). The most detected gene was mcr5 (35.3%), which was the most frequently detected gene in the seven provinces, while the least observed was mcr4 (4.8%), detected only in two provinces. These results suggested the feasibility of detecting specific colistin resistance genes in environmentally spread bacteria and understanding their distribution at the environmental level, despite their restricted clinical use. In a One-Health approach, this capability enables valuable environmental monitoring, considering the significant role of colistin in the context of public health.

Predictive statistical models for monitoring antimicrobial resistance spread in the environment using Apis mellifera (L. 1758) colonies

The rise of antimicrobial resistance (AMR) is one of the most relevant problems for human and animal health. According to One Health Approach, it is important to regulate the use of antimicrobials and monitor the spread of AMR in the environment as well. Apis mellifera (L. 1758) colonies were used as bioindicators thanks to their physical and behavioural characteristics. During their foraging flights, bees can intercept small particles, including atmospheric particulate matter, etc., and also microorganisms. To date, the antimicrobial surveillance network is limited to the sanitary level but lacks into environmental context. This study aimed to evaluate the use of A. mellifera colonies distributed throughout the Emilia-Romagna region (Italy) as indicators of environmental antimicrobial-resistant bacteria. This was performed by creating a statistical predictive model that establishes correlations between environmental characteristics and the likelihood of isolating specific bacterial genera and antimicrobial-resistant strains. A total of 608 strains were isolated and tested for susceptibility to 19 different antimicrobials. Aztreonam-resistant strains were significantly related to environments with sanitary structures, agricultural areas and wetlands, while urban areas present a higher probability of trimethoprim/sulfamethoxazole-resistant strains isolation. Concerning genera, environments with sanitary structures and wetlands are significantly related to the genera Proteus spp., while the Escherichia spp. strains can be probably isolated in industrial environments. The obtained models showed maximum values of Models Accuracy and robustness (R2) of 55 % and 24 %, respectively. The results indicate the efficacy of utilizing A. mellifera colonies as valuable bioindicators for estimating the prevalence of AMR in environmentally disseminated bacteria. This survey can be considered a good basis for the development of further studies focused on monitoring both sanitary and animal pathology, creating a specific network in the environments of interest.

Biotic and abiotic stresses on honeybee health

Honeybees are the most critical pollinators providing key ecosystem services that underpin crop production and sustainable agriculture. Amidst a backdrop of rapid global change, this eusocial insect encounters a succession of stressors during nesting, foraging, and pollination. Ectoparasitic mites, together with vectored viruses, have been recognized as central biotic threats to honeybee health, while the spread of invasive giant hornets and small hive beetles also increasingly threatens colonies worldwide. Cocktails of agrochemicals, including acaricides used for mite treatment, and other pollutants of the environment have been widely documented to affect bee health in various ways. Additionally, expanding urbanization, climate change, and agricultural intensification often result in the destruction or fragmentation of flower-rich bee habitats. The anthropogenic pressures exerted by beekeeping management practices affect the natural selection and evolution of honeybees, and colony translocations facilitate alien species invasion and disease transmission. In this review, the multiple biotic and abiotic threats and their interactions that potentially undermine bee colony health are discussed, while taking into consideration the sensitivity, large foraging area, dense network among related nestmates, and social behaviors of honeybees.

Antimicrobial-Resistant Environmental Bacteria Isolated Using a Network of Honey Bee Colonies (Apis mellifera L. 1758)

The phenomenon of antibiotic resistance stands as a paramount health challenge in the contemporary era. Within a One Health approach, it becomes crucial to effectively track the dissemination of antibiotic resistance, not only within humans and animals but also within the environment. To investigate the environment, the honey bee (Apis mellifera) has emerged as a prominent environmental bioindicator due to its social, behavioral, and morphological features. The objective of this study was to describe the antimicrobial resistance (AMR) patterns of bacterial isolates from the body surface and the gut of honey bees sampled from 33 colonies throughout the Emilia-Romagna region (Italy). A total of 608 strains were examined for 19 distinct antimicrobial compounds from various classes, and the results showed that more than 50% of the isolates for eight out of nine provinces showed characteristics of nonsusceptibility toward amoxicillin and penicillin, and, generally, 98.19% of isolated strains were considered AMR and 74.67% exhibited multidrug resistance (MDR) characteristics, more frequent in Gram-negative strains (87.74%) than in Gram-positive ones (60.34%). Additionally, a significant correlation with a lower prevalence of MDR bacteria was demonstrated for one province (Ferrara, odds ratio (OR) = 3.33, (1.67; 6.64), p=0.0006). In conclusion, this study provides evidence for the utility of A. mellifera colonies as bioindicators for MDR bacteria, enabling their characterization and distribution at a geographical level. Additional investigations are required to further explore the potential role of honey bees as bioindicators for antimicrobial-resistant bacteria, particularly in terms of their association with environmental characteristics.

The use of honey bee (Apis mellifera L.) as biological monitors for pathogenic bacteria and antimicrobial resistance: A systematic review

The phenomenon of antimicrobial resistance (AMR) is an increasingly real and relevant health problem. It is essential to verify the spread of this phenomenon in the environment. The European honey bee, Apis mellifera L., is a globally managed pollinator continuously used for biomonitoring thanks to its morphological and behavioural characteristics. During their foraging activities, a large number of honey bees move in the area surrounding the hive within a 1.5 km of radius. Besides, their body covered with hair and bristles are able to intercept pollen and minute particles, such as atmospheric particles, contaminants and microorganisms. For these reasons, A. mellifera L. is widely used as an environmental sentinel, especially for detecting pollutants, pesticides, microorganisms, and AMR. This systematic review aimed to collect and summarize the role of honey bee colonies as a biological monitor of AMR pathogenic bacteria and the environmental spread of antimicrobial resistance genes (ARGs). From honey bees were isolated a wide range of pathogenic and environmental bacteria strains, harbouring AMR and ARGs. However, AMR and ARGs were detected not only in environmental bacteria but also in symbiotic bacteria colonizing the bee gut. This systematic review highlights the employment of potential use of honey bees as AMR sentinel helpful for ecosystem health to implement possible control measures for humans, animals and plants, in the context of the "One-Health" approach.

Origin of non-exhaust PM in cities by individual analysis of particles collected by honey bees (Apis mellifera)

Urban areas present multiple challenges to scientists interested in unraveling the source, transport, and fate of airborne particulate matter (PM). Airborne PM consists of a heterogeneous mixture of particles with different sizes, morphologies, and chemical compositions. However, standard air quality stations only detect the mass concentration of PM mixtures with aerodynamic diameters ≤10 μm (PM₁₀) and/or ≤ 2.5 μm (PM_2.5). During honey bee foraging flights, airborne PM up to 10 μm in size attaches to their bodies, making them suitable for collecting spatiotemporal data on airborne PM. The individual particulate chemistry of this PM can be assessed using scanning electron microscopy coupled with energy-dispersive X-ray spectroscopy on a sub-micrometer scale, allowing accurate identification and classification of the particles. Herein, we analyzed the PM fractions of 10-2.5 μm, 2.5-1 μm, and below 1 μm in average geometric diameter collected by bees from hives located in the city of Milan, Italy. Bees showed contamination by natural dust, originating from soil erosion and rock outcropping in the foraging area, and particles with recurrent heavy metal content, most likely attributed to vehicular braking systems and possibly tires (non-exhaust PM). Notably, approximately 80% of non-exhaust PM was ≤1 μm in size. This study provides a possible alternative strategy to apportion the finer fraction of PM in urban areas and determine citizens' exposure. Our findings may also prompt decision-makers to issue policy addressal for non-exhaust pollution, especially for the ongoing restructuring of European regulations on mobility and the shift toward electric vehicles whose contribution to PM pollution is debated.

Effects of oral exposure to brake wear particulate matter on the springtail Orthonychiurus folsomi

Most of the heavy metals in urban environments derives from road traffic, particularly from tyres and brake wear (non-exhaust emission sources). These pollutants contaminate the soil, where several organisms have a primary ecosystem role (e.g., springtails, ants, earthworms). Springtails (Collembola) are soil-dwelling animals regulating soil fertility, flow of energy through above- and below-ground food webs, and they contribute to soil microbial community dispersion and biodiversity maintenance. In this study we investigated the ecotoxicological effects of oral exposure to particles emitted from brake pads and cast-iron brake discs in the euedaphic collembola species Orthonychiurus folsomi under laboratory conditions. Our results showed that chronic exposure to brake wear particles can have sub-lethal effects both at low and high concentrations and it can cause histological alterations. Here, SEM-EDX was applied to observe the particulate and we found its chemical markers in the gut and faeces of collembola, while histological analysis detected alterations of the digestive and reproductive systems and of the abdominal fat body at high concentrations.

Mobile samplers of particulate matter - Flying omnivorous insects in detection of industrial contamination

Flying insects are potential mobile samplers of airborne particulate matter (PM). However, current knowledge on their susceptibility to PM is limited to pollinators. Insects' capacity for particle surface accumulation depends on the lifestyle, structure of the body integuments, and behavioral patterns. Here, we investigate how two species of flying omnivorous insects from the genus Vespula, possessing direct interactions with air, soil, plants, and herbivores, indicate industrial pollution by accumulating coarse (PM₁₀) and fine (PM_2.5) particles on their bodies. The internal accumulation of particles in wasps' gut tissues is assessed considering heavy metals exposure to reveal and discuss the potential magnitude of ecotoxicological risks. Female individuals of Vespula vulgaris and V. germanica were sampled with a hand-netting near to Harjavalta Cu-Ni smelter and in the control areas in southwestern Finland. They were analyzed with light microscopy (LM), electron microscopy (SEM, TEM), and energy-dispersive X-ray spectroscopy (EDX) methods. Near to the smelter, wasps trapped significantly more particles, which were of bigger size and their surface optical density was higher. Vespula vulgaris accumulated larger particles than V. germanica, but that wasn't associated with morphological characteristics such as body size or hairiness. In both areas, accumulated surface PM carried clays and silicates. Only in polluted environments PM consistently contained metallic and nonmetallic particles (from high to moderate weight %) of Fe, Ni, Cu, and S - major pollutants emitted from the smelter. Wasps from industrially polluted areas carried significantly more granules in the columnar epithelial midgut cells. TEM-EDX analyses identified those structures were associated with metal ions such as Cr, Cu, Ni, and Fe. As epithelial gut cells accumulated metal particles, midgut confirmed as a barrier for metal exposure in wasps. External PM contamination in wasps is suggested as a qualitative, yet a natural and simple descriptor of local industrial emissions.

Rethinking the Connections between Ecosystem Services, Pollinators, Pollution, and Health: Focus on Air Pollution and Its Impacts

Ecosystems provide many services that are essential for human activities and for our well-being. Many regulation services are interconnected and are fundamental in mitigating and hindering the negative effects of several phenomena such as pollution. Pollution, in particular airborne particulate matter (PM), represents an important risk to human health. This perspective aims at providing a current framework that relates ecosystem services, regulating services, pollination, and human health, with particular regards to pollution and its impacts. A quantitative literature analysis on the topic has been adopted. The health repercussions of problems related to ecosystem services, with a focus on the effects of atmospheric particulate matter, have been highlighted in the work throughout a case study. In polluted environments, pollinators are severely exposed to airborne PM, which adheres to the insect body hairs and can be ingested through contaminated food resources, i.e., pollen and honey. This poses a serious risk for the health of pollinators with consequences on the pollination service and, ultimately, for human health.

The Honey Bee Apis mellifera: An Insect at the Interface between Human and Ecosystem Health

Simple Summary

Apis mellifera Linnaeus (1758), a honey bee, is a eusocial insect widely known for its role in pollination, an essential ecosystem service for plant biodiversity, and quality of vegetables and fruit products. In addition, honey bees and bee products are valuable bioindicators of pollutants, such as airborne particulate matter, heavy metals, and pesticides. In this review, we explore the provisioning, regulating, and cultural services provided by the honey bee, an insect at the interface between human and ecosystem health.

Abstract

The concept of ecosystem services is widely understood as the services and benefits thatecosystems provide to humans, and they have been categorised into provisioning, regulating, supporting, and cultural services. This article aims to provide an updated overview of the benefits that the honey bee Apis mellifera provides to humans as well as ecosystems. We revised the role of honey bees as pollinators in natural ecosystems to preserve and restore the local biodiversity of wild plants; in agro-ecosystems, this species is widely used to enhance crop yield and quality, meeting the increasing food demand. Beekeeping activity provides humans not only with high-quality food but also with substances used as raw materials and in pharmaceuticals, and in polluted areas, bees convey valuable information on the environmental presence of pollutants and their impact on human and ecosystem health. Finally, the role of the honey bee in symbolic tradition, mysticism, and the cultural values of the bee habitats are also presented. Overall, we suggest that the symbolic value of the honey bee is the most important role played by this insect species, as it may help revitalise and strengthen the intimate and reciprocal relationship between humans and the natural world, avoiding the inaccuracy of considering the ecosystems as mere providers of services to humans.

Honey bee (Apis mellifera L.) colonies as bioindicators of environmental SARS-CoV-2 occurrence

SARS-CoV-2 is responsible for the COVID-19 pandemic. Airflows sustain the infection spread, and in densely urbanized areas airborne particulate matters (PMs) are deemed to aggravate the viral transmission. Apis mellifera colonies are used as bioindicators as they allow environmental sampling of different nature, PMs included. This experiment demonstrates for the first time the possible use of honey bee colonies in the SARS-CoV-2 monitoring. The trial was conducted in Bologna on 18 March 2021, when the third wave of the Italian pandemic was at its peak and environmental conditions allowed high PM concentrations in the air. Sterile swabs were lined up at the hive entrance to sample the dusty material on the body of returning foragers. All of them resulted positive for the target genes of viral SARS-CoV-2 RNA. Likewise, internal samples were taken, but they resulted in no amplification of the target sequences. This experiment does not support speculations about the role of honey bees or their products in SARS-CoV-2 transmission. However, it indicates a novel use of A. mellifera colonies in the environmental detection of airborne human pathogens, at least in a densely urbanized area, deserving better understanding and possible integration with data from automatic air samplers.

Review of harmful chemical pollutants of environmental origin in honey and bee products

Honey is a natural food with many pro-health properties, which comprises a wide variety of valuable ingredients. It can also be the source of chemical contaminants of environmental origin, including POPs that can contribute to adverse health effects to human. Monitoring the degree of pollution of honey/bee products with hazardous chemicals is important from a nutraceutical point of view. In the present work, overview of recent literature data on chemical pollutants in honey/bee products originating from the environment was performed. Their MLs, MRLs and EDI were discussed. It can be concluded that huge amount of research concerned on the presence of TMs and pesticides in honey. Most of the studies have shown that honey/bee products sampled from urban and industrialized areas were more contaminated than these sampled from ecological and rural locations. More pollutants were usually detected in propolis and bee pollen than in honey. Based on their research and regulations, authors stated, that most of the toxic pollutants of environmental origin in honey/bee products are at levels that do not pose a threat to the health of the potential consumer. The greatest concern relates to pesticides and TMs, because in some research MLs in individual samples were highly exceeded.