Ecological impacts of ballast water loading and discharge: insight into the toxicity and accumulation of disinfection by-products

A critical review on ocean acidification driven by disinfection by-products discharge from ships' ballast water management systems: Impacts on carbon chemistry

The world's blue economy is closely tied to maritime trade, but ballast water from ships often carries harmful aquatic organisms and pathogens, which disrupt the marine environment. To address this, the International Maritime Organization (IMO) mandated ballast water treatment to eradicate these invasive species. However, the treatment processes inherently generate numerous Disinfection by-Products (DBPs). The discharge of these DBPs exacerbates ocean acidification through various acid- and CO2-releasing reactions. The IMO's Ballast Water Working Group has listed 41 high-priority DBPs for risk assessment due to their toxicity and prevalence in treated ballast water. This review quantitatively evaluates changes in pH and carbonate ions in seawater using the PyCO2SYS software package. Results reveal that DBPs can reduce ocean pH by ∼0.057 units and carbonate ion concentrations by 24.06 μmol kg-1 during a single discharge of 1 m3 treated water. In addition, this review outlines the challenges and research gaps for marine ecosystems sustainability.

Performance evaluation of the amperometric total residual oxidant sensor with the electrochlorination-based Ballast Water Management System

Nowadays, performance studies on the amperometric total residual oxidant (TRO) sensor are only in the bench test stage and have not been conducted under specific maritime conditions with Ballast Water Management System (BWMS). In this study, the application of the amperometric TRO sensor in land-based biological efficacy (BE) testing, operation and maintenance (O&M) testing, as well as shipboard (SB) testing, was explored by comparing with the existing di-phenylene-diamine (DPD) TRO sensor. The results showed that the average TRO measurement deviation between the amperometric sensor and the DPD sensor was within ±10% in valid BE test cycles and the O&M testing exceeding 47 operating hours. The TRO value measured by amperometric sensor exhibited significant fluctuations, but the improved control logic could achieve smoothing out the fluctuation, with stability comparable to or even higher than that of the DPD sensor. The practicality and reliability of the amperometric sensor in electrochlorination-based BWMS were further verified through SB testing.

Exploitation of environmental DNA (eDNA) for ecotoxicological research: A critical review on eDNA metabarcoding in assessing marine pollution

The rise in worldwide population has led to a noticeable spike in the production, consumption, and transportation of energy and food, contributing to elevated environmental pollution. Marine pollution is a significant global environmental issue with ongoing challenges, including plastic waste, oil spills, chemical pollutants, and nutrient runoff, threatening marine ecosystems, biodiversity, and human health. Pollution detection and assessment are crucial to understanding the state of marine ecosystems. Conventional approaches to pollution evaluation usually represent laborious and prolonged physical and chemical assessments, constraining their efficacy and expansion. The latest advances in environmental DNA (eDNA) are valuable methods for the detection and surveillance of pollution in the environment, offering enhanced sensibility, efficacy, and involvement. Molecular approaches allow genetic information extraction from natural resources like water, soil, or air. The application of eDNA enables an expanded evaluation of the environmental condition by detecting both identified and unidentified organisms and contaminants. eDNA methods are valuable for assessing community compositions, providing indirect insights into the intensity and quality of marine pollution through their effects on ecological communities. While eDNA itself is not direct evidence of pollution, its analysis offers a sensitive tool for monitoring changes in biodiversity, serving as an indicator of environmental health and allowing for the indirect estimation of the impact and extent of marine pollution on ecosystems. This review explores the potential of eDNA metabarcoding techniques for detecting and identifying marine pollutants. This review also provides evidence for the efficacy of eDNA assessment in identifying a diverse array of marine pollution caused by oil spills, harmful algal blooms, heavy metals, ballast water, and microplastics. In this report, scientists can expand their knowledge and incorporate eDNA methodologies into ecotoxicological research.

Toxicity evaluation of chlorinated natural water using Photobacterium phosphoreum: Implications for ballast water management

Chlorination of ballast water could produce harmful disinfection by-products (DBPs) and total residual oxidants. The International Maritime Organization calls for toxicity testing of discharged ballast water with fish, crustacea and algae to reduce the risk, but it is difficult to evaluate the toxicity of treated ballast water in a short time. Therefore, the purpose of this study was to analyze the applicability of luminescent bacteria to the assessment of residual toxicity of chlorinated ballast water. The toxicity unit for all treated samples were higher for Photobacterium phosphoreum than for microalgae (Selenastrum capricornutum and Chlorella pyrenoidosa), after adding neutralizer, all samples showed little effect on the luminescent bacteria and microalgae. For the DBPs, except for 2,4,6-Tribromophenol, Photobacterium phosphoreum could produce more sensitive and rapid test results than other species, the results in Photobacterium phosphoreum showed that the toxicity of DBPs in order of: 2,4-Dibromophenol > 2,6-Dibromophenol > 2,4,6-Tribromophenol > Monobromoacetic acid > Dibromoacetic acid > Tribromoacetic acid, and most binary mixtures (aromatic DBPs and aliphatic DBPs) presented synergistic effects based on the CA model. The aromatic DBPs in ballast water deserve more attention. In general, for ballast water management, the use of luminescent bacteria to evaluate the toxicity of treated ballast water and DBPs is desirable, this study could provide beneficial information for enhancing ballast water management.

Chlorination disinfection by-products in Southeast Asia: A review on potential precursor, formation, toxicity assessment, and removal technologies

This review discusses disinfection by-products' (DBPs) potential precursors, formation, and toxicity, alongside available research on the treatment of DBPs in Southeast Asian countries' water sources. Although natural organic matter (NOM) in the form of humic and fulvic acids is the major precursor of DBPs formation, the presence of anthropogenic organic matter (AOM) also plays essential roles during disinfection using chlorine. NOM has been observed in water sources in Southeast Asian countries, with a relatively high concentration in peat-influenced water sources and a relatively low concentration in non-peat-influenced water sources. Similarly, AOMs, such as microplastics, pharmaceuticals, pesticides, and endocrine-disrupting chemicals (EDCs), have also been detected in water sources in Southeast Asian countries. Although studies regarding DBPs in Southeast Asian countries are available, they focus on regulated DBPs. Here, the formation potential of unregulated DBPs is also discussed. In addition, the toxicity associated with extreme DBPs' formation potential, as well as the effectiveness of treatments such as conventional coagulation, filtration, adsorption, and ozonation in reducing DBPs' formation potential in Southeast Asian sources of water, is also analyzed.

Habitat Conditions of the Microbiota in Ballast Water of Ships Entering the Oder Estuary

Ballast water is a vector for the transfer of microorganisms between ecospheres that can subsequently have a negative impact on native species of aquatic fauna. In this study, we determined the microbiota and selected physicochemical properties of ballast water from long- and short-range ships entering a southern Baltic port within a large estuary in autumn and winter (Police, Poland). Microbiological tests of the ballast water samples were carried out according to ISO 6887-1, and physicochemical tests were performed according to standard methods. Low amounts of oxygen (1.6-3.10 mg/dm3 in autumn and 0.60-2.10 mg/dm3 in winter) were recorded in all ship ballast water samples, with pH (above 7.90) and PSU (above 1.20) were higher than in the port waters. Yeast, mold, Pseudomonas bacteria (including Pseudomonas fluorescens), and halophilic bacteria as well as lipolytic, amylolytic, and proteolytic bacteria were found in the ballast water samples. Heterotrophic bacteria and mold fungi (log. 2.45-3.26) dominated in the autumn period, while Pseudomonas bacteria (log. 3.32-4.40) dominated in the winter period. In addition, the ballast water samples taken during the autumn period were characterized by a statistically significantly higher (p < 0.1) abundance of microorganisms (log 1.97-2.55) than in the winter period (log 1.39-2.27).