Supramolecular structure and thermal behavior of cassava starch treated by oxygen and helium glow-plasmas

3D printing of hausa potato starch: Assessing a new dimension of cold plasma treatment using varied feed gas

3D printing is a technology proficient in producing complex objects in an appealing design with precise composition and dimensions. This study employed cold plasma (CP) to modify hausa potato starch, specifically for 3D printing applications. CP treatment using four distinct feed gases (oxygen, argon, air, and nitrogen) was applied to investigate their impact on starch properties and printability. Findings indicated that type of feed gas selected for CP production significantly altered the physicochemical characteristics of the starch, influencing the rheological properties and printability. All samples exhibited 3D printability, with argon CP-treated starch showing the best printability. Oxygen and argon CP-treated starch samples showed an increased relative crystallinity, gelatinization enthalpy, and peak intensity of the C-O-C bond along with enhanced gel strength, viscoelasticity, and rigidity. Conversely, nitrogen and air CP-treatment caused a decreased relative crystallinity and gelatinization enthalpy and increased peak intensity of OH groups. These changes resulted in altered rheological behavior and printability of the modified starch gels. The CP-Ar sample exhibited superior printing precision with a K value of 3162 Pa·sn. The CP-Ar sample exhibited printability that closely aligned with the CAD model, followed by CP-Air, while CP-O2 and CP-N2 showed lower printability.

Cold plasma-induced structural and thermal enhancements in marshmallow root mucilage-gelatin aerogels

Aerogels are highly regarded for their low density and large surface area, attracting significant attention due to their diverse applications. This study explored nitrogen cold plasma's impact on the structure and thermal stability of mucilage-gelatin aerogels (MGA). Aerogels were prepared using marshmallow root mucilage and gelatin in a 1:1 ratio and gelatin-only as a blank under different pH conditions (5 and 7). Rheological and texture analyses identified pH 7 as optimal. Aerogels at pH 7 were then exposed to cold plasma for varying durations (0, 3, and 6 min). Thermogravimetric analysis (TGA), differential thermal analysis (DTA), and X-ray diffraction (XRD) showed enhanced thermal stability and structural changes with increased plasma exposure. Fourier-transform Infrared Spectroscopy (FTIR) revealed functional group changes, and contact angle measurements showed that 3 min of plasma treatment increased hydrophilicity (88.37-82.05°), while 6 min enhanced hydrophobicity in 1:1 MGA (93.27°). BET (Brunauer-Emmett-Teller) analyses of the MGA samples revealed changes in surface area (2.9-4.33 m2/g after 3 min of plasma) and BJH (Barrett-Joyner-Halenda) pore volume (0.004-0.02 cm3/g), with a complex trend over time. This study highlights nitrogen cold plasma's potential to enhance mucilage-based biopolymer aerogels, paving the way for advanced materials via optimized treatments.

Integrative approach to modifying banana starch: The role of physical treatment and polyphenol enrichment on physicochemical and digestive characteristics

This study assessed the effects of three physical methods-dielectric barrier discharge (DBD) plasma, ultrasound, and heat-moisture treatment-coupled with resveratrol enrichment, on the physicochemical and digestive properties of banana starch. The findings indicated that each physical treatment enhanced the complex index between starch and resveratrol. Scanning electron microscopy and X-ray diffraction analyses revealed that the inherent A-type crystallinity of the starch remained unchanged after modifications. Heat-moisture treatment induced the most profound alterations in the long-range and short-range order. While DBD plasma and ultrasound did not affect the granular morphology, heat-moisture treatment caused the most significant disruption. Furthermore, DBD plasma and ultrasound treatments significantly enhanced the solubility, gelatinization temperature, and viscoelastic properties of banana starch, while having a negligible effect on its digestibility. After heat-moisture treatment, banana starch exhibited significantly higher gelatinization temperatures (To = 72.13 °C, Tp = 82.56 °C, Tc = 83.69 °C) and a digestion rate of 82.37 %, compared to those observed with DBD plasma and ultrasound treatments, despite reduced solubility and viscoelasticity. Additionally, all three treatments improved the oil absorption capacity of the starch. The integration of resveratrol not only consolidated starch structure but also augmented its thermal stability and resistant starch content. These findings provide empirical support for modifying banana starch and expanding its application in food industry.

Supramolecular structure and in vitro digestive properties of plasma-treated corn starches varying in amylose content

The effects of plasma treatment on the multi-scale structure and in vitro digestibility of maize starch with different amylose contents were systematically evaluated. The results demonstrated that all maize starches' molecular weights (MW) decreased when treated with plasma, among which the MW of waxy maize starch displayed the largest reduction. Plasma treatment led to an increase in the thickness of the semi-crystalline lamellae and double helix proportions of waxy and normal maize starches. However, high-amylose maize starch presented a less ordered structure by plasma treatment. Additionally, larger pores and channels were observed on the surface of plasma-treated waxy and normal maize starch granules. Moreover, deposits were displayed on the surface of high-amylose maize starch granules. These changes increased the in vitro digestibility and hydrolysis rate of three starches after plasma treatment. Notably, plasma treatment caused diverse alterations in the structure and functionality of maize starch varying in amylose content, leading to maize starch with better digestibility, therefore being used as an ingredient for functional foods.

Influence of crystalline properties on starch functionalization from the perspective of various physical modifications: A review

The relationship between structural properties and functional characteristics of starch remains a hot subject among researchers. The crystalline property is a substantial characteristic of starch granules, undergoing different changes during modification techniques. These changes are closely related to the functional properties of modified starches. Physical modifications are eco-friendly techniques and are widely adopted for starch modifications. Therefore, understanding the impact of changes in crystalline properties during different physical modifications on starch functionality is the ultimate way to improve their industrial utilization. However, the existing literature still lacks the elucidation of changes in functional properties of starch in accordance with its crystalline properties during different physical treatments. Hence, this review summarizes the effects of the most important and widely used physical modifications on starch crystalline properties, highlighting the alterations in various functional properties such as hydration, pasting, gelatinization, and in vitro digestibility resulting from changes in crystalline characteristics in a single comprehensive discussion. Furthermore, the current review gives direction for envisaging the functionalization of starches based on deviations in the crystalline properties during several physical treatments.

Effects of chemically reactive species generated in plasma treatment on the physico-chemical properties and biological activities of polysaccharides: An overview

Plasma technology as an advanced oxidation technology, has gained increasing interest to generate numerous chemically reactive species during the plasma discharge process. Such chemically reactive species can trigger a chain of chemical reactions leading to the degradation of macromolecules including polysaccharides. This review primarily summarizes the generation of various chemically reactive species during plasma treatment and their effects on the physico-chemical properties and biological activities of polysaccharides. During plasma treatment, the type of chemically reactive species that play a major role is related to equipment, working gases and types of polysaccharides. The primary chain structure of polysaccharides did not changed much during the plasma treatment, other physico-chemical properties might be changed, such as molecular weight, solubility, hydrophilicity, rheological properties, gel properties, crystallinity, elemental composition, glycosidic bonding, and surface morphology. Additionally, the biological activities of plasma-treated polysaccharides including antibacterial, antioxidant, immunological, antidiabetic activities, and seed germination promotion activities in agriculture could be improved. Therefore, plasma treatment has the potential application in preparing polysaccharides with enhanced biological activities.

Insights into multiscale structure and digestive characteristic of starch from two cultivars of chestnut during kernel development

Multiscale structure and digestive characteristic of starch during kernel development of Castanea henryi ('Jinzhui' (YS) and 'Baiyan No.1' (WS)) were investigated in this study. Structural analysis revealed that the surface of starch granules became smooth, the amylopectin content decreased (from 71.32 % to 70.47 %, from 71.44 % to 68.37 %, respectively), the chain length distribution of amylopectin reduced (the proportion of B1 chain decreased from 52.35 % to 50.60 %, from 52.22 % to 50.59 %, respectively) while the amorphous and semi-crystalline lamellae of starch increased during development, which was consistent with the decreasing relative crystallinity (from 28.79 % to 24.11 %, from 29.57 % to 23.66 %, respectively) and short-range ordering degree. The degradation of ordered structure further resulted in the increase of digestibility, especially in the late developmental stage, supported by a significant decrease of resistant starch content (from 70.21 % to 61.70 % and from 73.58 % to 58.86 %, respectively). Transcriptome analysis and RT-qPCR were performed to explore the possible molecular mechanisms affecting starch structure. The high expression of several key genes including AGPase, GBSS, SBE, SSS, ISA and PUL in late development stage might be the reason of structural changes during development. The results provided valuable information for starch accumulation during kernel development of Castanea henryi.

Effects of cold plasma pretreatment combined with sodium periodate on property enhancement of dialdehyde starch prepared using native maize starch

This study represents the inaugural investigation into the effect of cold plasma (CP) pretreatment combined with sodium periodate on the preparation of dialdehyde starch (DAS) from native maize starch and its consequent effects on the properties of DAS. The findings indicate that the maize starch underwent etching by the plasma, leading to an increase in the particle size of the starch, which in turn weakened the rigid structure of the starch and reduced its crystallinity. Concurrently, the plasma treatment induced cleavage of the starch molecular chain, resulting in a decrease in the viscosity of the starch and an enhancement of its fluidity. These alterations facilitated an increased contact area between the starch and the oxidising agent sodium periodate, thereby augmenting the efficiency of the DAS preparation reaction. Consequently, the aldehyde group content was elevated by 9.98 % compared to the conventional DAS preparation methodology. Therefore, CP could be an efficient and environmentally friendly non-thermal processing method to assist starch oxidation for DAS preparation and property enhancement.

Development and Characterization of Edible Films Based on Cassava Starch Modified by Corona Treatment

Corona treatment (CT), a surface treatment widely used in the plastic industry, can be used to alter the properties of cassava starch. In the present work, CT was performed on dry granular starch (DS), water-suspended humid granular starch (HS), and gelatinized starch (GS). Different properties and structural characteristics of treated starches were studied. A lowering in pH was generally observed after CT and the rheological properties depended on the starch presentation. A reinforcement of DS and HS samples after CT was deduced from higher viscosity values in flow assays and viscoelastic moduli, but weak gels were obtained when CT was applied to GS. Changes in the A-type polymorphic structure, as well as a drop in relative crystallinity, were produced by CT for DS and HS. Additionally, changes in O-H and C-O-C FTIR bands were observed. Therefore, CT can be applied for starch modification, producing predominantly cross-linking in the DS and de-polymerization in the HS. Casting films made from the modified DS showed higher tensile strength and lower hydrophilicity, solubility, water absorption capacity, and water vapor permeability. Thus, the DS cross-linking induced by CT improved mechanical characteristics and hydrophobicity in edible films, which can be better used as packaging materials.

Starch ordered structures control starch reassembly behaviors during heat-moisture treatment for modulating its digestibility

This study investigated the effect of starch crystallinity on starch reassembly behaviors during the heat-moisture treatment (HMT) using starches with A-type crystal content of 0.00%-19.03%. The results showed that HMT reduced the native starch crystal content from 19.03% to 15.02% and increased starch thermostability, leading to a decrease in rapidly digestible starch (RDS) content from 86.91% to 76.71%. Moreover, starches containing a crystal content of 2.51%-8.11% exhibited significant reassembly during the HMT, and the resulting modified starches had more crystals and less RDS of 63.43%-69.31%. Interestingly, starches lacked A-type crystals but had some helical structures exhibiting A-type crystalline structures and lower digestibility after HMT. These findings verified that starch could significantly reassemble to form crystalline structures during the HMT. Controlling the crystal content of starch granules, particularly between 2.51% and 8.11%, was a promising approach for promoting starch reassembly during HMT and reducing starch digestibility.

Understanding CaCl2 induces surface gelatinization to promote cold plasma modified maize starch: Structure-effect relations

To investigate the influence of surface gelatinization on cold plasma (CP) modification of starch, this study used CaCl2 to modify maize starch by surface gelatinization, further combined with CP treatment and characterized its multi-scale structure and physicochemical properties. The results revealed that starch surface gelatinization causes roughness and fragmentation on the granule surface, and CP undergoes etching effects. The synergistic modification promotes starch degradation, as evidenced by molecular weight decrease and short-chain ratio increase. Although the growth rings, FT-IR patterns, and crystal types of starch remained unchanged, the synergistic modification induced a reduction in the short-range orderliness and crystallinity of starch, thus causing a decrease in the pasting properties and contributing to its solubility. Notably, the CP treatment improved the RDS and SDS contents of the gelatinized starch due to more active sites on the granule surface after gelatinization, and this finding may provide insight into the deep processing of starch.

Plasma Effects on Properties and Structure of Corn Starch: Characterization and Analysis

This research investigated the impact of air plasma and high-pressure plasma treatments on corn starch. The resulting samples were characterized by particle morphology, molecular polymerization degree, molecular functional groups, and crystallinity. SEM analysis revealed that plasma treatment altered the surface morphology of corn starch, with variations observed depending on the duration of treatment. UV/Vis spectroscopy results indicated that longer plasma exposure times increased maximum absorbance values with less complete peak shapes. FTIR results demonstrated that plasma treatment disrupted the crystalline structure of starch, resulting in decreased molecular polymerization. Lastly, XRD results showed a proportional relationship between plasma treatment duration and the intensity of the diffuse peak, indicating that prolonged plasma exposure increased the amorphous nature of starch.

Enhanced properties of non-starch polysaccharide and protein hydrocolloids through plasma treatment: A review

Hydrocolloids are important ingredients in food formulations and their modification can lead to novel ingredients with unique functionalities beyond their nutritional value. Cold plasma is a promising technology for the modification of food biopolymers due to its non-toxic and eco-friendly nature. This review discusses the recent published studies on the effects of cold plasma treatment on non-starch hydrocolloids and their derivatives. It covers the common phenomena that occur during plasma treatment, including ionization, etching effect, surface modification, and ashing effect, and how they contribute to various changes in food biopolymers. The effects of plasma treatment on important properties such as color, crystallinity, chemical structure, rheological behavior, and thermal properties of non-starch hydrocolloids and their derivatives are also discussed. In addition, this review highlights the potential of cold plasma treatment to enhance the functionality of food biopolymers and improve the quality of food products. The mechanisms underlying the effects of plasma treatment on food biopolymers, which can be useful for future research in this area, are also discussed. Overall, this review paper presents a comprehensive overview of the current knowledge in the field of cold plasma treatment of non-starch hydrocolloids and their derivatives and highlights the areas that require further investigation.

Hierarchical structural modification of starch via non-thermal plasma: A state-of-the-art review

The hierarchical architecture of natural and processed starches with different surface and internal structures determines their final physicochemical properties. However, the oriented control of starch structure presents a significant challenge, and non-thermal plasma (cold plasma, CP) has gradually been used to design and tailor starch macromolecules, though without clear illustration. In this review, the multi-scale structure (i.e., chain-length distribution, crystal structure, lamellar structure, and particle surface) of starch is summarized by CP treatment. The plasma type, mode, medium gas and mechanism are also illustrated, as well as their sustainable food applications, such as in food taste, safety, and packaging. The effects of CP on the chain-length distribution, lamellar structure, amorphous zone, and particle surface/core of starch includes irregularity due to the complex of CP types, action modes, and reactive conditions. CP-induced chain breaks lead to short-chain distributions in starch, but this rule is no longer useful when CP is combined with other physical treatments. The degree but not type of starch crystals is indirectly influenced by CP through attacking the amorphous region. Furthermore, the CP-induced surface corrosion and channel disintegration of starch cause changes in functional properties for starch-related applications.

Cold plasma technologies: Their effect on starch properties and industrial scale-up for starchmodification

Native starches have limited applications in the food industry due to their unreactive and insoluble nature. Cold plasma technology, including plasma-activated water (PAW), has been explored to modify starches to enhance their functional, thermal, molecular, morphological, and physicochemical properties. Atmospheric cold plasma and low-pressure plasma systems have been used to alter starches and have proven successful. This review provides an in-depth analysis of the different cold plasma setups employed for starch modifications. The effect of cold plasma technology application on starch characteristics is summarized. We also discussed the potential of plasma-activated water as a novel alternative for starch modification. This review provides information needed for the industrial scale-up of cold plasma technologies as an eco-friendly method of starch modification.

•

Cold plasma technology could be an effective, sustainable alternative for starch modification.

•

The extent of modification of starches from different botanical sources depends on the type of cold plasma technology used.

•

For mainstream adoption of cold plasma modified starches, research on safety and consumer perception must be conducted.

The multi-scale structure and physicochemical properties of mung bean starch modified by ultrasound combined with plasma treatment

Plasma is a simple, effective and promising food processing technology with great potential for starch modification. Mung bean starch was subjected to ultrasound (300 W, 10, 30 and 50 min), plasma (40 V, 1, 3 and 9 min) and the synergistic treatment, as well as investigating its effects on the morphology, chain length distribution, molecular weight, crystalline structure and physicochemical properties of starch. Ultrasound and plasma treatment did not change the granule shape, but caused some corrosions on the surface, and dual treatment increased the damage degree of starch granules surface. All treatments decreased the molecular weight (Mw), amylopectin long chains and crystallinity but increased the gelatinization temperatures and enthalpy. Different from ultrasound irradiation, single plasma treatment significantly reduced the swelling power and pasting viscosities. Furthermore, dual treatment increased the thermal stability of starch paste, owing to the reinforcement effect between ultrasound and plasma. Thus, dual modification displayed an excellent ability to modify starch with specific characteristics and expand the potential application of mung bean starch in the food industry.

Understanding the multi-scale structure, physicochemical properties and in vitro digestibility of citrate naked barley starch induced by non-thermal plasma

Non-thermal plasma treatment is an emerging and effective starch modification technique. In this paper, plasma pretreatment was used to modify citrate naked barley starch for enhancing the ability of citric acid to access the starch structure. Plasma treatment did not alter the granule morphology and crystalline type of starch, but degraded the starch molecules and caused more short chains. Plasma pretreatment could etch the starch surface and depolymerize the starch molecules, which increased the accessibility of citric acid for uniform hydrolysis in the subsequent esterification reaction. Therefore, plasma pretreatment significantly promoted the structural and physicochemical modification of the citrate starch, including the enhancement of the degree of substitution, the short-range ordered degree and gelatinization temperatures, and the decreases in the molecular weight, long chains of amylopectin and pasting viscosities. Meanwhile, plasma pretreatment improved the efficiency of acid hydrolysis and decreased the enzymatic digestibility, so that it showed a higher resistant starch content in comparison with its corresponding citrate starch. This paper could provide a new insight into the lower digestion rate and improved functional properties of citrate starch.

Chemical changes of food constituents during cold plasma processing: A review

There is a growing demand for the consumption of nutritious and safe food products. Cold plasma is a novel non-thermal technology that in recent years, has found numerous applications in the food industry. Study on the applications of this technology and its effects on food quality is increasing. Like any other technology, using cold plasma for the processing of foods can be associated with food quality challenges. This paper reviews the effect of cold plasma on the chemical structure of different food constituents as well as its influence on food characteristics. The emphasis is on the recent studies about the plasma mechanisms of action and chemical alterations of different food components. The studies show that the interaction of plasma-reactive species with food components depends on process conditions. Developing the functional characteristics and reducing the anti-nutritional compounds are of promising potentials of cold plasma. Finally, the research gaps, the salient drawbacks, and future prospects of this technology are highlighted.

Green and clean modification of cassava starch - effects on composition, structure, properties and digestibility

There is a growing need for clean and green labeling of food products among consumers globally. Therefore, development of green modified starches, to boost functionality, palatability and health benefits while reducing the negative processing impacts on the environment and reinforcing consumer safety is in high demand. Starch modification started in mid-1500s due to the inherent limitations of native starch restricting its commercial applications, with chemical modification being most common. However, with the recent push for "chemical-free" labeling, methods of physical and enzymatic modification have gained immense popularity. These methods have been successfully used in numerous studies to alter the composition, structure, functionality and digestibility of starch and in this review, studies reported on green modification of cassava starch, one of the most common utilized starches, within the last ten years have been critically reviewed. Recent research has introduced starch as an abundant, natural substrate for producing resistant starches through biophysical technologies that act as dietary fiber in the human body. It is evident that different techniques and processing parameters result in varying degrees of modification impacting the techno-functionality and digestibility of the resultant starch. This can be exploited by researchers and industrialists in order to customize starch functionality in accordance with application.

Changes in Nanoscale Chain Assembly in Sweet Potato Starch Lamellae by Downregulation of Biosynthesis Enzymes

Granule-bound starch synthase I (GBSSI) and starch-branching enzymes I and II (SBEI and SBEII) are crucial enzymes that biosynthesize starches with varied apparent amylose contents and amylopectin branching structure. With a sweet potato ( Ipomoea batatas [L.] Lam. cv. Xushu22), this work shows that downregulating GBSSI (for waxy starch) or SBE (for high-amylose starch) activity allowed the formation of new semicrystalline lamellae (named Type II) in sweet potato starch in addition to the widely reported Type I lamellae. Small-angle X-ray scattering (SAXS) results show that, compared with Type I lamellae, Type II lamellae displayed increased average thickness and thickness-distribution width, with thickened amorphous and crystalline components. The size-exclusion-chromatography (SEC) data revealed mainly two enzyme sets, (i) and (ii), synthesizing amylopectin chains. Reducing the GBSSI or SBE activity increased the amounts of amylopectin long chains (degree of polymerization (DP) ≥ 33). Combined SAXS and SEC analyses indicate that parts of these long chains from enzyme set (i) could be confined to Type II lamellae, followed by DP ≤ 32 short chains in Type I lamellae and the rest of the long chains from enzyme sets (i) and (ii) spanning more than a single lamella.