Preparation and application of poly(N,N-dimethylacrylamide-co-acrylamide) and poly(N-isopropylacrylamide-co-acrylamide)/κ-Carrageenan hydrogels for immobilization of lipase

UV mutagenesis for lipase overproduction from Bacillus cereus ATA179, nutritional optimization, characterization and its usability in the detergent industry

In this study, the wild-type Bacillus cereus ATA179 was mutagenized by random UV mutagenesis to increase lipase production. The mutant with maximum lipolytic activity was named Bacillus cereus EV4. The mutant strain (10.6 U/mL at 24 h) produced 60% more enzyme than the wild strain (6.6 U/mL at 48 h). Nutritional factors on lipase production were investigated. Sucrose was the best carbon source, (NH4)2HPO4 was the best nitrogen source and CuSO4 was the best metal ion source. Mutant EV4 showed a 32% increase in lipase production in the modified medium. The optimum temperature and pH were found to be 60 °C and 7.0, respectively. CuSO4, CaCl2, LiSO4, KCl, BaCl2, and Tween 20 had an activating effect on the enzyme. Vmax and Km values were found to be 17.36 U/mL and 0.036 mM, respectively. The molecular weight was determined as 28.2 kDa. The activity of lipase was found to be stable up to 60 days at 20 °C, 75 days at 4 °C, and 90 days at -20 °C. The potential of lipase in the detergent industry was investigated. The enzyme was not affected by detergent additives but was effective in removing stains in fabrics contaminated with oily substances.

Construction of molecular enrichment accelerators via assembly of enzyme surface grafted polymer and cyclodextrin achieving rapid and stable ester catalysis for biodiesel synthesis

Efficient and stable catalysis has always been the core concept of enzyme catalysis in industrial processes for manufacturing. Here, we constructed molecular enrichment accelerators to synergistically enhance enzyme activity and stability by assembling enzyme surface grafted polymer and cyclodextrin. At 40 °C, the enzyme activity of CalB-PNIPAM212/β-CD was 2.9 times that of CalB-PNIPAM212. The enzyme activity of CalB-PNIPAM428/γ-CD had reached 1.61 times that of CalB. At the same time, the stability of CalB-PNIPAM212/β-CD and CalB-PNIPAM428/γ-CD are slightly better than that of CalB under high temperature, organic solution and extreme pH conditions. The synergistic increase in activity and stability of the lipase-polymer assembly was achieved due to the structure of assembly, in which the role of cyclodextrin could enrich substrate affecting molecular diffusion. In addition, the lipase-polymer assembly proved to be an efficient catalyst for biodiesel synthesis, with a biodiesel conversion 1.4 times that of CalB at 60 °C. Therefore, this simple and low-cost lipase-polymer assembly provides new possibilities for the construction of high-efficiency industrial biocatalytic catalysts.

An Up-to-Date Review on the Remediation of Dyes and Phenolic Compounds from Wastewaters Using Enzymes Immobilized on Emerging and Nanostructured Materials: Promises and Challenges

Addressing the critical issue of water pollution, this review article emphasizes the need to remove hazardous dyes and phenolic compounds from wastewater. These pollutants pose severe risks due to their toxic, mutagenic, and carcinogenic properties. The study explores various techniques for the remediation of organic contaminants from wastewater, including an enzymatic approach. A significant challenge in enzymatic wastewater treatment is the loss of enzyme activity and difficulty in recovery post-treatment. To mitigate these issues, this review examines the strategy of immobilizing enzymes on newly developed nanostructured materials like graphene, carbon nanotubes (CNTs), and metal-organic frameworks (MOFs). These materials offer high surface areas, excellent porosity, and ample anchoring sites for effective enzyme immobilization. The review evaluates recent research on enzyme immobilization on these supports and their applications in biocatalytic nanoparticles. It also analyzes the impact of operational factors (e.g., time, pH, and temperature) on dye and phenolic compound removal from wastewater using these enzymes. Despite promising outcomes, this review acknowledges the challenges for large-scale implementation and offers recommendations for future research to tackle these obstacles. This review concludes by suggesting that enzyme immobilization on these emerging materials could present a sustainable, environmentally friendly solution to the escalating water pollution crisis.

New Gelatin-Based Hydrogel Foams for Improved Substrate Conversion of Immobilized Horseradish Peroxidase

Hydrogel foams provide an aqueous environment that is very attractive for the immobilization of enzymes. To this end, functional polymers are needed that can be converted into hydrogel foams and that enable bioconjugation while maintaining high enzyme activity. The present study demonstrates the potential of biotinylated gelatin methacryloyl (GM10EB) for this purpose. GM10EB is synthesized in a two-step procedure with gelatin methacryloyl (GM10) being the starting point. Successful biotinylation is confirmed by 2,4,6-trinitrobenzene sulfonic acid (TNBS) and 4'-hydroxyazobenzene-2-carboxylic acid (HABA)/Avidin assays. Most importantly, a high methacryloyl group content (DM) is maintained in GM10EB, so that solutions of GM10EB show both a sufficiently low viscosity for microfluidic foaming and a pronounced curing behavior. Thus, foamed and non-foamed GM10EB hydrogels can be prepared via radical cross-linking of the polymer chains. Within both sample types, biotin groups are available for bioconjugation, as is demonstrated by coupling streptavidin-conjugated horseradish peroxidase to the hydrogels. When assessing the substrate conversion rate r_A in both foamed and non-foamed hydrogels by enzymatic conversion of 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS), we observed a value for r_A twelve times higher than the value for non-foamed hydrogels of the same mass. In other words, r_A can be successfully tailored by the hydrogel morphology. This article is protected by copyright. All rights reserved.

Epoxy functionalized iron oxide magnetic nanoparticles for catalase enzyme covalent immobilization

An aqueous solution of magnetite (Fe3O4) nanoparticles was synthesized using the method of co-precipitation. The nanoparticles were activated with epichlorohydrin for covalently immobilizing the catalase enzyme. The immobilization conditions were optimized as 0.07 mg/ml catalase for 1 h contact time. The properties of free and immobilized catalase were also investigated. The immobilized enzyme showed enhanced activity at alkaline pH and retained about 90% of its relative activity between pH (6–8) and resisted the high temperature and retained 90% of its relative activity at 50 °C. Kinetic parameters of free and immobilized catalase were investigated. While the Vmax value of the immobilized enzyme was reduced 2.4 fold compared to the free enzyme, the KM value of the immobilized catalase was higher by 2.2 fold than the free enzyme. The formulated matrix enhanced the velocity of the immobilized catalase more than the free one and was able to be used for about 18 cycles with retention of 80% of its activity. The immobilized catalase on epoxy functionalized iron oxide nanoparticles is promising as a nano-bio-catalyst carrying out in many industries and different fields.

Immobilized phytases: an overview of different strategies, support material, and their applications in improving food and feed nutrition

Phytases are the most widely used food and feed enzymes, which aid in nutritional improvement by reducing anti-nutritional factor. Despite the benefits, enzymes usage in the industry is restricted by several factors such as their short life-span and poor reusability, which result in high costs for large-scale utilization at commercial scale. Furthermore, under pelleting conditions such as high temperatures, pH, and other factors, the enzyme becomes inactive due to lesser stability. Immobilization of phytases has been suggested as a way to overcome these limitations with improved performance. Matrices used to immobilize phytases include inorganic (Hydroxypatite, zeolite, and silica), organic (Polyacrylamide, epoxy resins, alginate, chitosan, and starch agar), soluble matrix (Polyvinyl alcohol), and nanomaterials including nanoparticles, nanofibers, nanotubes. Several surface analysis methods, including thermal gravimetric analysis (TGA), differential scanning calorimetry (DSC), and FTIR analysis, have been used to characterize immobilized phytase. Immobilized phytases have been used in a broad range of biotechnological applications such as animal feed, biodegradation of food phytates, preparations of myo-inositol phosphates, and sulfoxidation by vanadate-substituted peroxidase. This article provides information on different matrices used for phytase immobilization from the last two decades, including the process of immobilization and support material, surface analysis techniques, and multifarious biotechnological applications of the immobilized phytases.

Nano-organic supports for enzyme immobilization: Scopes and perspectives

A variety of organic nanomaterials and organic polymers are used for enzyme immobilization to increase enzymes stability and reusability. In this study, the effects of the immobilization of enzymes on organic and organic-inorganic hybrid nano-supports are compared. Immobilization of enzymes on organic support nanomaterials was reported to significantly improve thermal, pH and storage stability, acting also as a protection against metal ions inhibitory effects. In particular, the effects of enzyme immobilization on reusability, physical, kinetic and thermodynamic parameters were considered. Due to their biocompatibility with low health risks, organic support nanomaterials represent a good choice for the immobilization of enzymes. Organic nanomaterials, and especially organic-inorganic hybrids, can significantly improve the kinetic and thermodynamic parameters of immobilized enzymes compared to macroscopic supports. Moreover, organic nanomaterials are more environment friendly for medical applications, such as prodrug carriers and biosensors. Overall, organic hybrid nanomaterials are receiving increasing attention as novel nano-supports for enzyme immobilization and will be used extensively.

Different strategies for the lipase immobilization on the chitosan based supports and their applications

Immobilized enzymes have received incredible interests in industry, pharmaceuticals, chemistry and biochemistry sectors due to their various advantages such as ease of separation, multiple reusability, non-toxicity, biocompatibility, high activity and resistant to environmental changes. This review in between various immobilized enzymes focuses on lipase as one of the most practical enzyme and chitosan as a preferred biosupport for lipase immobilization and provides a broad range of studies of recent decade. We highlight several aspects of lipase immobilization on the surface of chitosan support containing various types of lipase and immobilization techniques from physical adsorption to covalent bonding and cross-linking with their benefits and drawbacks. The recent advances and future perspectives that can improve the present problems with lipase and chitosan such as high-price of lipase and low mechanical resistance of chitosan are also discussed. According to the literature, optimization of immobilization methods, combination of these methods with other techniques, physical and chemical modifications of chitosan, co-immobilization and protein engineering can be useful as a solution to overcome the mentioned limitations.

Covalent Immobilization of Candida rugosa Lipase on Epichlorohydrin-Coated Magnetite Nanoparticles: Enantioselective Hydrolysis Studies of Some Racemic Esters and HPLC Analysis

In this study, a new biocatalyst was prepared by immobilizing Candida rugosa lipase epichlorohydrin-functionalized onto the surface of the nanoparticles. Magnetite nanoparticles were obtained by chemical co-precipitation method of Fe²⁺ and Fe³⁺, and then the prepared uncoated and coated nanoparticles were characterized by XRD, FT-IR and TGA. Lipase was covalently attached to activated nanoparticles. The catalytic properties of free and immobilized lipases were determined. It was found that the optimum temperature for free and immobilized lipases was 30 °C and 35 °C, respectively. The optimum pH values were found to be 7.0 and 8 for free and immobilized lipases, respectively. Immobilized lipase was found to retain significant activity even after the seventh use. In the final section of the study, optically pure compounds were obtained by carrying out the enantioselective hydrolysis studies of racemic esters by using immobilized lipase. Enantiomeric excesses of the products in the enantioselective hydrolysis of racemic ibuprofen and naproxen methyl ester and racemic butyl mandelate were determined to be 94.93, 77.30 and 68.15, respectively.

Naturally-derived biopolymers: Potential platforms for enzyme immobilization

Naturally-derived biopolymers such as alginate, chitosan, cellulose, agarose, guar gum/guaran, agar, carrageenan, gelatin, dextran, xanthan, and pectins, etc. have appealed significant attention over the past several years owing to their natural abundance and availability all over the years, around the globe. In addition, their versatile properties such as non-toxicity, biocompatibility, biodegradability, flexibility, renewability, and the availability of numerous reactive sites offer significant functionalities with multipurpose applications. At present, intensive research efforts have been focused on engineering enzymes using natural biopolymers as novel support/composite materials for diverse applications in biomedical, environmental, pharmaceutical, food and biofuel/energy sectors. Immobilization appears as a straightforward and promising approach to developing biocatalysts with improved catalytic properties as compared to their free counterparts. Biopolymers-assisted enzymes are more stable, robust, and recoverable than that of free forms, and can be employed for continuous biocatalytic reactions. The present review highlights the recent developments and use of biopolymers and their advanced composites as support carriers for the immobilization of a variety of different enzymes to develop biocatalysts with desired catalytic activity and stability characteristics for emerging applications.

Efficient Physisorption of Candida Antarctica Lipase B on Polypropylene Beads and Application for Polyester Synthesis

In the present work, Candida antarctica lipase B (CaLB) was adsorbed onto polypropylene beads using different reaction conditions, in order to investigate their influence on the immobilization process and the enzyme activity of the preparations in polymerization reactions. In general, lower salt concentrations were more favorable for the binding of enzyme to the carrier. Polymerisation of dimethyl adipate (DMA) and 1,4-butanediol (BDO) was investigated in thin-film systems at 70 °C and at both atmosphere pressure (1000 mbar) and 70 mbar. Conversion rates and molecular masses of the reaction products were compared with reactions catalyzed by CaLB in its commercially available form, known as Novozym 435 (CaLB immobilized on macroporous acrylic resin). The best results according to molecular weight and monomer conversion after 24 h reaction time were obtained with CaLB immobilized in 0.1 M Na2HPO4\NaH2PO4 buffer at pH 8, producing polyesters with 4 kDa at conversion rates of 96% under low pressure conditions. The stability of this preparation was studied in a simulated continuous polymerization process at 70 °C, 70 mbar for 4 h reaction time. The data of this continuous polymerizations show that the preparation produces lower molecular weights at lower conversion rates, but is comparable to the commercial enzyme concerning stability for 10 cycles. However, after 24 h reaction time, using our optimum preparation, higher molecular weight polyesters (4 kDa versus 3.1 kDa) were obtained when compared to Novozym 435.

Biodiesel Production via Trans-Esterification Using Pseudomonas cepacia Immobilized on Cellulosic Polyurethane

In this work, Pseudomonas cepacia lipase immobilized on cellulosic polyurethane was used as a catalyst for biodiesel production via trans-esterification reactions in order to provide cost-effective methods of enzyme recycling. The efficacy of the immobilized enzyme catalyst at low loading (6.2 wt %) and the effects of temperature, water content, and reaction time in model trans-esterification of glyceryl trioctanoate were investigated extensively. It was found that water was necessary for the reaction of glyceryl trioctanoate with ethanol to proceed. A high conversion of glyceryl trioctanoate (∼70%) was obtained at 35 °C, with only 5.0 wt % of water content over a reaction period of 12 h.

Enzyme Immobilization: An Overview on Methods, Support Material, and Applications of Immobilized Enzymes

Immobilized enzymes can be used in a wide range of processes. In recent years, a variety of new approaches have emerged for the immobilization of enzymes that have greater efficiency and wider usage. During the course of the last two decades, this area has rapidly expanded into a multidisciplinary field. This current study is a comprehensive review of a variety of literature produced on the different enzymes that have been immobilized on various supporting materials. These immobilized enzymes have a wide range of applications. These include applications in the sugar, fish, and wine industries, where they are used for removing organic compounds from waste water. This study also reviews their use in sophisticated biosensors for metabolite control and in situ measurements of environmental pollutants. Immobilized enzymes also find significant application in drug metabolism, biodiesel and antibiotic production, bioremediation, and the food industry. The widespread usage of immobilized enzymes is largely due to the fact that they are cheaper, environment friendly, and much easier to use when compared to equivalent technologies.

In vitro stability evaluation of coated lipase

Objective

The study was conducted to evaluate the stability of commercial coated lipase (CT-LIP) in vitro.

Methods

The capsules were tested under different conditions with a range of temperature, pH, dry heat treatment and steaming treatment, simulated gastric fluid (SGF) and simulated intestinal fluid (SIF) in this work, respectively. Free lipase (uncoated lipase, UC-LIP) was the control group. Lipase relative activities measured in various treatments were used as a reference frame to characterize the stability.

Results

The lipase activities were decreased with increasing temperatures (p<0.05), and there was a markedly decline (p<0.01) in lipase comparative activities of UC-LIP at 80°C compared with CT-LIP group. Higher relative activities of lipase were observed in CT-LIP group compared with the free one under acidic ambient (pH 3 to 7) and an alkaline medium (pH 8 to 12). Residual lipase activities of CT-LIP group were increased (p<0.05) by 5.67% and 35.60% in dry heat and hydrothermal treatments, respectively. The lipase relative activity profile of CT-LIP was raised at first and dropped subsequently (p<0.05) compared with constantly reduced tendency of UC-LIP exposed to both SGF and SIF.

Conclusion

The results suggest that the CT-LIP possesses relatively higher stability in comparison with the UC-LIP in vitro. The CT-LIP could retain the potential property to provide sustained release of lipase and thus improved its bioavailability in the gastrointestinal tract.

Nanobiocatalysis: Nanostructured materials – a minireview

The field of nanobiocatalysis has experienced a rapid growth due to recent advances in nanotechnology. However, biocatalytic processes are often limited by the lack of stability of the enzymes and their short lifetime. Therefore, immobilization is key to the successful implementation of industrial processes based on enzymes. Immobilization of enzymes on functionalized nanostructured materials could give higher stability to nanobiocatalysts while maintaining free enzyme activity and easy recyclability under various conditions. This review will discuss recent developments in nanobiocatalysis to improve the stability of the enzyme using various nanostructured materials such as mesoporous materials, nanofibers, nanoparticles, nanotubes, and individual nanoparticles enzymes. Also, this review summarizes the recent evolution of nanostructured biocatalysts with an emphasis on those formed with polymers. Based on the synthetic procedures used, established methods fall into two important categories: “grafting onto” and “grafting from”. The fundamentals of each method in enhancing enzyme stability and the use of these new nanobiocatalysts as tools for different applications in different areas are discussed.

Electrospun regenerated cellulose nanofibrous membranes surface-grafted with polymer chains/brushes via the atom transfer radical polymerization method for catalase immobilization

In this study, an electrospun regenerated cellulose (RC) nanofibrous membrane with fiber diameters of ∼200-400 nm was prepared first; subsequently, 2-hydroxyethyl methacrylate (HEMA), 2-dimethylaminoethyl methacrylate (DMAEMA), and acrylic acid (AA) were selected as the monomers for surface grafting of polymer chains/brushes via the atom transfer radical polymerization (ATRP) method. Thereafter, four nanofibrous membranes (i.e., RC, RC-poly(HEMA), RC-poly(DMAEMA), and RC-poly(AA)) were explored as innovative supports for immobilization of an enzyme of bovine liver catalase (CAT). The amount/capacity, activity, stability, and reusability of immobilized catalase were evaluated, and the kinetic parameters (Vmax and Km) for immobilized and free catalase were determined. The results indicated that the respective amounts/capacities of immobilized catalase on RC-poly(HEMA) and RC-poly(DMAEMA) nanofibrous membranes reached 78 ± 3.5 and 67 ± 2.7 mg g(-1), which were considerably higher than the previously reported values. Meanwhile, compared to that of free CAT (i.e., 18 days), the half-life periods of RC-CAT, RC-poly(HEMA)-CAT, RC-poly(DMAEMA)-CAT, and RC-poly(AA)-CAT were 49, 58, 56, and 60 days, respectively, indicating that the storage stability of immobilized catalase was also significantly improved. Furthermore, the immobilized catalase exhibited substantially higher resistance to temperature variation (tested from 5 to 70 °C) and lower degree of sensitivity to pH value (tested from 4.0 and 10.0) than the free catalase. In particular, according to the kinetic parameters of Vmax and Km, the nanofibrous membranes of RC-poly(HEMA) (i.e., 5102 μmol mg(-1) min(-1) and 44.89 mM) and RC-poly(DMAEMA) (i.e., 4651 μmol mg(-1) min(-1) and 46.98 mM) had the most satisfactory biocompatibility with immobilized catalase. It was therefore concluded that the electrospun RC nanofibrous membranes surface-grafted with 3-dimensional nanolayers of polymer chains/brushes would be suitable/ideal as efficient supports for high-density and reusable enzyme immobilization.

Immobilization of catalase on electrospun PVA/PA6-Cu(II) nanofibrous membrane for the development of efficient and reusable enzyme membrane reactor

In this study, a mat/membrane consisting of overlaid PVA/PA6-Cu(II) composite nanofibers was prepared via the electrospinning technique followed by coordination/chelation with Cu(II) ions; an enzyme of catalase (CAT) was then immobilized onto the PVA/PA6-Cu(II) nanofibrous membrane. The amount of immobilized catalase reached a high value of 64 ± 4.6 mg/g, while the kinetic parameters (Vmax and Km) of enzyme were 3774 μmol/mg·min and 41.13 mM, respectively. Furthermore, the thermal stability and storage stability of immobilized catalase were improved significantly. Thereafter, a plug-flow type of immobilized enzyme membrane reactor (IEMR) was assembled from the PVA/PA6-Cu(II)-CAT membrane. With the increase of operational pressure from 0.02 to 0.2 MPa, the flux value of IEMR increased from 0.20 ± 0.02 to 0.76 ± 0.04 L/m(2)·min, whereas the conversion ratio of H2O2 decreased slightly from 92 ± 2.5% to 87 ± 2.1%. After 5 repeating cycles, the production capacity of IEMR was merely decreased from 0.144 ± 0.006 to 0.102 ± 0.004 mol/m(2)·min. These results indicated that the assembled IEMR possessed high productivity and excellent reusability, suggesting that the IEMR based on electrospun PVA/PA6-Cu(II) nanofibrous membrane might have great potential for various applications, particularly those related to environmental protection.

Enzyme immobilization: an overview on techniques and support materials

The current demands of the world’s biotechnological industries are enhancement in enzyme productivity and development of novel techniques for increasing their shelf life. These requirements are inevitable to facilitate large-scale and economic formulation. Enzyme immobilization provides an excellent base for increasing availability of enzyme to the substrate with greater turnover over a considerable period of time. Several natural and synthetic supports have been assessed for their efficiency for enzyme immobilization. Nowadays, immobilized enzymes are preferred over their free counterpart due to their prolonged availability that curtails redundant downstream and purification processes. Future investigations should endeavor at adopting logistic and sensible entrapment techniques along with innovatively modified supports to improve the state of enzyme immobilization and provide new perspectives to the industrial sector.

Preparation of a Cu(II)-PVA/PA6 composite nanofibrous membrane for enzyme immobilization

PVA/PA6 composite nanofibers were formed by electrospinning. Cu(II)-PVA/PA6 metal chelated nanofibers, prepared by the reaction between PVA/PA6 composite nanofibers and Cu²⁺ solution, were used as the support for catalase immobilization. The result of the experiments showed that PVA/PA6 composite nanofibers had an excellent chelation capacity for Cu²⁺ ions, and the structures of nanofibers were stable during the reaction with Cu²⁺ solution. The adsorption of Cu(II) onto PVA/PA6 composite nanofibers was studied by the Langmuir isothermal adsorption model. The maximum amount of coordinated Cu(II) (q_m) was 3.731 mmol/g (dry fiber), and the binding constant (K_l) was 0.0593 L/mmol. Kinetic parameters were analyzed for both immobilized and free catalases. The value of V_max (3774 μmol/mg·min) for the immobilized catalases was smaller than that of the free catalases (4878 μmol/mg·min), while the K_m for the immobilized catalases was larger. The immobilized catalases showed better resistance to pH and temperature than that of free form, and the storage stabilities, reusability of immobilized catalases were significantly improved. The half-lives of free and immobilized catalases were 8 days and 24 days, respectively.

Optimal Conditions for Continuous Immobilization of Pseudozyma hubeiensis (Strain HB85A) Lipase by Adsorption in a Packed-Bed Reactor by Response Surface Methodology

This study aimed to develop an optimal continuous process for lipase immobilization in a bed reactor in order to investigate the possibility of large-scale production. An extracellular lipase of Pseudozyma hubeiensis (strain HB85A) was immobilized by adsorption onto a polystyrene-divinylbenzene support. Furthermore, response surface methodology (RSM) was employed to optimize enzyme immobilization and evaluate the optimum temperature and pH for free and immobilized enzyme. The optimal immobilization conditions observed were 150 min incubation time, pH 4.76, and an enzyme/support ratio of 1282 U/g support. Optimal activity temperature for free and immobilized enzyme was found to be 68°C and 52°C, respectively. Optimal activity pH for free and immobilized lipase was pH 4.6 and 6.0, respectively. Lipase immobilization resulted in improved enzyme stability in the presence of nonionic detergents, at high temperatures, at acidic and neutral pH, and at high concentrations of organic solvents such as 2-propanol, methanol, and acetone.

[Investigation of surgical applicability of acryl-based tissue expanders]

INTRODUCTION

Hydrogels made of acrylamide (AAm), acrylic acid (AAc) and N-isopropylacrylamide (NIPAAm) display outstanding ability of swelling in vitro and this property can be influenced by the composition of the polymers. Our objective was to study the in vivo behavior of hydrogels made of acrylics and their potential role in surgery.

MATERIALS AND METHODS

Cylinder-shaped hydrogels were implanted under the skin of rats in the dorsal region. In group 1 AAm, in group 2 AAc while in group 3 NIPAAm expanders were applied. The observation period lasted 18 days, during this time the length and the diameter of the hydrogels were measured daily. After removal of the polymers the moisture mass and the rheological parameters were determined. Furthermore, biopsies were taken from adjacent tissues.

RESULTS

Expanders achieved the peak of swelling in two weeks. During the observation period their mass significantly increased. NIPAAm polymers demonstrated the highest tendency to retain their preformed shape. Histological analysis revealed that implantation of AAc devices was associated with serious tissue damage while healthy skin was harvested with the other two polymers.

CONCLUSION

In conclusion, NIPAAm hydrogel seems to be the most promising candidate for surgical utilization.

Thermoresponsive poly(N-isopropylacrylamide) gel for immobilization of laccase on indium tin oxide electrodes

We report on the properties of hydrogel matrix for the immobilization of laccase on conductive supports. The poly(N-isopropylacrylamide) gel is attached firmly to the indium-tin oxide (ITO) electrode, following its silanization with dimethylethoxyvinylsilane. The enzyme entrapped in the gel structure remained active longer than in the solution, and its redox and catalytic properties could be investigated by voltammetric methods. The reduction signals of the active sites, T1 and T2, of the Cerrena unicolor laccase were determined to be 0.79 and 0.38 V, respectively. The laccase catalytic activity toward oxygen in poly(N-isopropylacrylamide) was found to depend strongly on temperature. Reversible swelling/shrinking of the matrix was studied at 30 and 35 degrees C. Shrinking of the gel at higher temperature considerably decreased the efficiency of the catalytic reaction, however, interestingly, did not lead to irreversible changes in the enzyme structure. At temperatures below that corresponding to volume phase transition, the catalytic properties of the film were fully restored. High catalytic efficiency of the gel immobilized enzyme made it possible to employ the gel covered electrode for monitoring oxygen in solutions.