Construction of a triglyceride amperometric biosensor based on chitosan–ZnO nanocomposite film

A highly sensitive optical fiber sensor enables rapid triglycerides-specific detection and measurement at different temperatures using convolutional neural networks

For specific recognition and sensitive detection of triglycerides (TGs), an optical fiber sensor (OFS) based on an enhanced core diameter mismatch was proposed. The sensitivity of the sensor is significantly increased due to the repetitive excitation of the higher-order cladding modes. A technique for immobilizing lipase using covalent binding technology was presented and demonstrated by Fourier transform infrared (FTIR) spectroscopy and scanning electron microscopy. The interference dip of the sensor was shifted due to TGs being hydrolyzed in the presence of lipase. The sensor shows an optimal response within 3 min and exhibits a high sensitivity of 0.9933 nm/(mg/ml) and a limit of detection of 0.0822 mg/ml in the concentration range 0-8 mg/ml at a temperature of 37 °C and a pH of 7.4. The response of the sensor to TGs concentration at different temperatures and pH was investigated. The reproducibility, reusability, and stability of the proposed sensor were tested and verified experimentally. The biosensor is highly specific for TGs and unaffected by many other interfering substances. Further, the measurement of TGs concentration at different temperatures was realized. This method provides a new way to detect TGs rapidly and reliably and has potential applications in medical research and clinical diagnosis.

Triglyceride-Tethered Membrane Lipase Sensor

Sensors that can quickly measure the lipase activity from biological samples are useful in enzyme production and medical diagnostics. However, current lipase sensors have limitations such as requiring fluorescent labels, pH control of buffer vehicles, or lengthy assay preparation. We introduce a sparsely tethered triglyceride substrate anchored off of a gold electrode for the impedance sensing of real-time lipase activity. The tethered substrate is self-assembled using a rapid solvent exchange technique and can form an anchored bilayer 1 nm off the gold electrode. This allows for an aqueous reservoir region, providing access to ions transported through membrane defects caused by triglyceride enzymatic hydrolysis. Electrical impedance spectroscopy techniques can readily detect the decrease in resistance caused by enzymatically induced defects. This rapid and reliable lipase detection method can have potential applications in disease studies, monitoring of lipase production, and as point-of-care diagnostic devices.

Recent Advances in Applications of Oxidases and Peroxidases Polymer-Based Enzyme Biocatalysts in Sensing and Wastewater Treatment: A Review

Oxidase and peroxidase enzymes have attracted attention in various biotechnological industries due to their ease of synthesis, wide range of applications, and operation under mild conditions. Their applicability, however, is limited by their poor stability in harsher conditions and their non-reusability. As a result, several approaches such as enzyme engineering, medium engineering, and enzyme immobilization have been used to improve the enzyme properties. Several materials have been used as supports for these enzymes to increase their stability and reusability. This review focusses on the immobilization of oxidase and peroxidase enzymes on metal and metal oxide nanoparticle-polymer composite supports and the different methods used to achieve the immobilization. The application of the enzyme-metal/metal oxide-polymer biocatalysts in biosensing of hydrogen peroxide, glucose, pesticides, and herbicides as well as blood components such as cholesterol, urea, dopamine, and xanthine have been extensively reviewed. The application of the biocatalysts in wastewater treatment through degradation of dyes, pesticides, and other organic compounds has also been discussed.

Design and characterization of a biosensor with lipase immobilized nanoparticles in polymer film for the detection of triglycerides

High levels of triglycerides in blood can harden and block the arteries increasing the risk of heart disease and strokes. Triglycerides are important constituents of oils and fats used in various foods. The triglyceride content in commercial preparations of oils is estimated using conventional methods. In the present study, an electrochemical biosensor with lipase immobilized novel conductive polymer film has been developed for estimating triglyceride content in a variety of products. The portable biosensor can bring down the detection costs dramatically and can be used for varied purposes. It is based on cyclic voltammetry and has a three-electrode configuration system. Glassy carbon electrode is functionalized with nanoparticles embedded in polyethyleneimine and lipase is immobilized using glutaraldehyde. The strategy increases the electrochemical conductance manifold and overcomes the hindrance to lipase posed by membranes as it is oriented on the outside of the membrane. Thus, it increases the sensitivity and selectivity of detection. Results of scanning electron microscopy and FT-IR spectroscopy were used for characterizing the electrode surface. Linear range of the electrode for triglycerides is 100-500 mg/dL. The sensor was used successfully to determine triglyceride content in several real samples and the average recovery values lie from 95.47 % to 101.05 %.

Application of nanotechnology in the diagnosis and treatment of acute pancreatitis

Acute pancreatitis (AP) is a common digestive system disease. The severity of AP ranges from mild edema in the pancreas to severe systemic inflammatory responses leading to peripancreatic/pancreatic necrosis, multi-organ failure and death. Improving the sensitivity of AP diagnosis and developing alternatives to traditional methods to treat AP have gained the attention of researchers. With the continuous rise of nanotechnology, it is being widely used in daily life, biomedicine, chemical energy and many other fields. Studies have demonstrated the effectiveness of nanotechnology in the diagnosis and treatment of AP. Nanotechnology has the advantages of simplicity, rapidity and sensitivity in detecting biomarkers of AP, as well as enhancing imaging, which helps in the early diagnosis of AP. On the other hand, nanoparticles (NPs) have oxidative stress inhibiting and anti-inflammatory effects, and can also be loaded with drugs as well as being used in anti-infection therapy, providing a new approach for the treatment of AP. In this article, we elaborate and summarize on the potential of nanoparticles for diagnostic and therapeutic applications in AP from the current reported literature and experimental results to provide useful guidelines for further research on the application of nanotechnology.

Different strategies for the lipase immobilization on the chitosan based supports and their applications

Immobilized enzymes have received incredible interests in industry, pharmaceuticals, chemistry and biochemistry sectors due to their various advantages such as ease of separation, multiple reusability, non-toxicity, biocompatibility, high activity and resistant to environmental changes. This review in between various immobilized enzymes focuses on lipase as one of the most practical enzyme and chitosan as a preferred biosupport for lipase immobilization and provides a broad range of studies of recent decade. We highlight several aspects of lipase immobilization on the surface of chitosan support containing various types of lipase and immobilization techniques from physical adsorption to covalent bonding and cross-linking with their benefits and drawbacks. The recent advances and future perspectives that can improve the present problems with lipase and chitosan such as high-price of lipase and low mechanical resistance of chitosan are also discussed. According to the literature, optimization of immobilization methods, combination of these methods with other techniques, physical and chemical modifications of chitosan, co-immobilization and protein engineering can be useful as a solution to overcome the mentioned limitations.

Construction of a Hydrogel Pectin-Based Triglyceride Optical Biosensor with Immobilized Lipase Enzymes

A novel and simple optical biosensor to detect triglycerides (TGs) has been successfully constructed by using pectin hydrogel membrane as the indicator pH and chromoionophore ETH 5294 (CI), with lipase as the catalyst. The enzymatic working system against TGs releasing H⁺ ions will affect the color absorbance of CI. The characterization results show that a TG biosensor has the optimum condition and sensitivity at the phosphate buffer concentration of 50 mM, pH 7, and enzyme loading of 60 μg. The biosensor works at the tripalmitin (TP) concentration range of 100–400 mg/dL. With the sensitivity of 0.001 (∆A/(mg/dL)), the biosensor response reaches stability after five minutes, and the limit of detection (LOD) of the TG optical biosensor is 15 mg/dL. Relative standard deviation (RSD) in a reproducibility test was 2.5%, with a 15-day lifespan.

Bi-enzyme functionalized electro-chemically reduced transparent graphene oxide platform for triglyceride detection

Recently, increased attention has been drawn to application of graphene and its derivatives for construction of biosensors, since they can be used to rapidly detect the presence of bio-analytes.

Nanomaterial-based biosensors for measurement of lipids and lipoproteins towards point-of-care of cardiovascular disease

Cardiovascular disease (CVD) has become the primary cause of global deaths and inflicts an enormous healthcare burden on both developed and developing countries. Frequent monitoring of CVD-associated risk factors such as the level of lipids (e.g., triglyceride (TG) and total cholesterol (TC)) and lipoproteins (e.g., low-density lipoprotein (LDL) and high-density lipoprotein (HDL)) can effectively help prevent disease progression and improve clinical outcomes. However, measurement of these risk factors is generally integrated into an automated analyzer, which is prohibitively expensive and highly instrument-dependent for routine testing in primary care settings. As such, a variety of rapid, simple and portable nanomaterial-based biosensors have been developed for measuring the level of lipids (TG and TC) and lipoproteins (LDL and HDL) towards the management of CVD at the point-of-care (POC). In this review, we first summarize traditional methods for measurement of lipids and lipoproteins, and then present the latest advances in developing nanomaterial-based biosensors that can potentially monitor the risk factors of CVD at the POC.

Recent advances in designing nanomaterial based biointerfaces for electrochemical biosensing cardiovascular biomarkers

Early diagnosis of cardiovascular disease (CVD) is critically important for successful treatment and recovery of patients. At present, detection of CVD at early stages of its progression becomes a major issue for world health. The nanoscale electrochemical biosensors exhibit diverse outstanding properties, rendering them extremely suitable for the determination of CVD biomarkers at very low concentrations in biological fluids. The unique advantages offered by electrochemical biosensors in terms of sensitivity and stability imparted by nanostructuring the electrode surface together with high affinity and selectivity of bioreceptors have led to the development of new electrochemical biosensing strategies that have introduced as interesting alternatives to conventional methodologies for clinical diagnostics of CVD. This review provides an updated overview of selected examples during the period 2005-2018 involving electrochemical biosensing approaches and signal amplification strategies based on nanomaterials, which have been applied for determination of CVD biomarkers. The studied CVD biomarkers include AXL receptor tyrosine kinase, apolipoproteins, cholesterol, C-reactive protein (CRP), D-dimer, fibrinogen (Fib), glucose, insulin, interleukins, lipoproteins, myoglobin, N-terminal pro-B-type natriuretic peptide (BNP), tumor necrosis factor alpha (TNF-α) and troponins (Tns) on electrochemical transduction format. Identification of new specific CVD biomarkers, multiplex bioassay for the simultaneous determination of biomarkers, emergence of microfluidic biosensors, real-time analysis of biomarkers and point of care validation with high sensitivity and selectivity are the major challenges for future research.

Hemocompatible ɛ-polylysine-heparin microparticles: A platform for detecting triglycerides in whole blood

Triglycerides are clinically important marker for atherosclerosis, heart disease and hypertension. Here, a platform for detecting triglycerides in whole blood directly was developed based on hemocompatible ɛ-polylysine-heparin microparticles. The obtained products of ɛ-polylysine-heparin microparticles were characterized by fourier transform infrared (FT-IR) spectra, transmission electron microscopy (TEM) and ζ-potential. Moreover, the blood compatibility of ɛ-polylysine-heparin microparticles was characterized by in vitro coagulation tests, hemolysis assay and whole blood adhesion tests. Considering of uniform particle size, good dispersibility and moderate long-term anticoagulation capability of the microparticles, a Lipase-(ɛ-polylysine-heparin)-glassy carbon electrode (GCE) was constructed to detect triglycerides. The proposed biosensor had good electrocatalytic activity towards triglycerides, in which case the sensitivity was 0.40μAmg^-1dLcm^-2 and the detection limit was 4.67mgdL^-1 (S/N = 3). Meanwhile, the Lipase-(ɛ-polylysine-heparin)-GCE electrode had strong anti-interference ability as well as a long shelf-life. Moreover, for the detection of triglycerides in whole blood directly, the detection limit was as low as 5.18mgdL^-1. The new constructed platform is suitable for detecting triglycerides in whole blood directly, which provides new analytical systems for clinical illness diagnosis.

Chitosan-Covered Pd@Pt Core-Shell Nanocubes for Direct Electron Transfer in Electrochemical Enzymatic Glucose Biosensor

Development of biosensors with high sensitivity, high spatial resolution, and low cost has received significant attention for their applications in medical diagnosis, diabetes management, and environment-monitoring. However, achieving a direct electrical contact between redox enzymes and electrode surfaces and enhancing the operational stability still remain as challenges. Inorganic metal nanocrystals (NCs) with precisely controlled shape and surface structure engineered with an appropriate organic coating can help overcome the challenges associated with their stability and aggregation for practical biosensor applications. Herein, we describe a facile, room-temperature, seed-mediated solution-phase route to synthesize monodisperse Pd@Pt core-shell nanocubes with subnanometer-thick platinum (Pt) shells. The enzyme electrode consisting of Pd@Pt core-shell NCs was first covered with a chitosan (CS) polymer and then glucose oxidase (GOx) immobilized by a covalent linkage to the CS. This polymer permits covalent immobilization through active amino (-NH) side groups to improve the stability and preserve the biocatalytic functions while the Pd@Pt NCs facilitate enhanced direct electron transfer (DET) in the biosensor. The resultant biosensor promotes DET and exhibits excellent performance for the detection of glucose, with a sensitivity of 6.82 μA cm-2 mM-1 and a wide linear range of 1-6 mM. Our results demonstrate that sensitive electrochemical glucose detection based on Pd@Pt core-shell NCs provides remarkable opportunities for designing low-cost and sensitive biosensors.

A new multienzyme-type biosensor for triglyceride determination

An amperometric multienzyme biosensor for determination of triglycerides (TGs) was constructed by mounting three gelatin membrane-bound enzymes on a glassy carbon electrode (working electrode), then connecting it to electrometer along with an Ag/AgCl reference electrode and a Pt auxiliary electrode. Characterization and optimization of the multienzyme biosensor, which is prepared with glycerol kinase (GK) (E.C.2.7.1.30), glycerol-3-phosphate oxidase (GPO) (EC 1.1.3.21), and lipase (EC 3.1.1.3), were studied. In the optimization studies for the bioactive layer components of the prepared biosensor, the optimum amounts of gelatin, bovine serum albumin (BSA), and glutaraldehyde was calculated as 1 mg/cm(2), 1 mg/cm(2), and 2.5%, respectively. Optimum pH and temperature of the reaction of biosensor were determined as 7.0 and 40 °C, respectively. Linear range of triolein for the biosensor was found from the calibration curve between several substrate concentration and Δ Current. After optimization and characterization of the biosensor, its operationability in triglycerides was also tested.

Biosensing Test-Bed Using Electrochemically Deposited Reduced Graphene Oxide

The development of an efficient test-bed for biosensors requires stable surfaces, capable of interacting with the functional groups present in bioentities. This work demonstrates the formation of highly stable electrochemically reduced graphene oxide (ERGO) thin films reproducibly on indium tin oxide (ITO)-coated glass substrates using a reliable technique through 60 s chronoamperometric reduction of a colloidal suspension maintained at neutral pH containing graphene oxide in deionized water. Structural optimization and biocompatible interactions of the resulting closely packed and uniformly distributed ERGO flakes on ITO surfaces (ERGO/ITO) are characterized using various microscopic and spectroscopic tools. Lipase enzyme is immobilized on the ERGO surface in the presence of ethyl-3-[3-(dimethylamino)propyl]carbodimide and N-hydroxysuccinimide for the detection of triglyceride in a tributyrin (TBN) solution. The ERGO/ITO surfaces prepared using the current technique indicate the noticeable detection of TBN, a source of triglycerides, at a sensitivity of 37 pA mg dL(-1) cm(-2) in the linear range from 50 to 300 mg dL(-1) with a response time of 12 s. The low apparent Michaelies-Menten constant of 0.28 mM suggests high enzyme affinity to TBN. The currently developed fast, simple, highly reproducible, and reliable technique for the formation of an ERGO electrode could be routinely utilized as a test bed for the detection of clinically active bioentities.

Surface functionalized halloysite nanotubes decorated with silver nanoparticles for enzyme immobilization and biosensing

Illustrating the selective modification of the HNTs for the incorporation of AgNPs and site-specific covalent immobilization of the GOx enzymes.

Rational Design of Nanoparticle Platforms for "Cutting-the-Fat": Covalent Immobilization of Lipase, Glycerol Kinase, and Glycerol-3-Phosphate Oxidase on Metal Nanoparticles

The aggregates of nanoparticles (NPs) are considered better supports for the immobilization of enzymes, as these promote enzyme kinetics, due to their unusual but favorable properties such as larger surface area to volume ratio, high catalytic efficiency of certain immobilized enzymes, non-toxicity of some of the nanoparticle matrices, high stability, strong adsorption of the enzyme of interest by a number of different approaches, and faster electron transportability. Co-immobilization of multiple enzymes required for a multistep reaction cascade on a single support is more efficient than separately immobilizing the corresponding enzymes and mixing them physically, since products of one enzyme could serve as reactants for another. These products can diffuse much more easily between enzymes on the same particle than diffusion from one particle to the next, in the reaction medium. Thus, co-immobilization of enzymes onto NP aggregates is expected to produce faster kinetics than their individual immobilizations on separate matrices. Lipase, glycerol kinase, and glycerol-3-phosphate oxidase are required for lipid analysis in a cascade reaction, and we describe the co-immobilization of these three enzymes on nanocomposites of zinc oxide nanoparticles (ZnONPs)-chitosan (CHIT) and gold nanoparticles-polypyrrole-polyindole carboxylic acid (AuPPy-Pin5COOH) which are electrodeposited on Pt and Au electrodes, respectively. The kinetic properties and analytes used for amperometric determination of TG are fully described for others to practice in a trained laboratory. Cyclic voltammetry, scanning electron microscopy, Fourier transform infra-red spectra, and electrochemical impedance spectra confirmed their covalent co-immobilization onto electrode surfaces through glutaraldehyde coupling on CHIT-ZnONPs and amide bonding on AuPPy/Pin5COOH. The combined activities of co-immobilized enzymes was tested amperometrically, and these composite nanobiocatalysts showed optimum activity within 4-5s, at pH 6.5-7.5 and 35°C, when polarized at a potential between 0.1 and 0.4V. Co-immobilized enzymes showed excellent linearity within 50-700mg/dl of the lipid with detection limit of 20mg/dl for triolein. The half life of co-immobilized enzymes was 7 months, when stored dry at 4°C which is very convenient for practical applications. Co-immobilized biocatalysts measured triglycerides in the sera of apparently healthy persons and persons suffering from hypertriglyceridemia, which is recognized as a leading cause for heart disease. The measurement of serum TG by co-immobilized enzymes was unaffected by the presence of a number of serum substances, tested as potential interferences. Thus, co-immobilization of enzymes onto aggregates of NPs resulted in improved performance for TG analysis.

A novel ultrasensitive phosphate amperometric nanobiosensor based on the integration of pyruvate oxidase with highly ordered gold nanowires array

A novel phosphate amperometric nanobiosensor, based on an intimate integration of pyruvate oxidase (PyOx) and its cofactors, thiamine pyrophosphate (TPP) and flavin adenine dinucleotide (FAD), with a highly ordered gold nanowires array (AuNWA) has been developed. The successful integration of PyOx and the co-factors, via crosslinking with bovine serum albumin (BSA) and glutaraldehyde (GLA), onto the AuNWA was confirmed by cyclic voltammetry and amperometry. The resulting nanobiosensor achieved a detection limit of 0.1 µM, a linear concentration range of 12.5-1000 µM, and a sensitivity of 140.3 µA mM(-1)cm(-2). Notably, the incorporation of the AuNWA reduced the required PyOx concentration by 70-120 fold and the presence of common interferants, such as chloride, sulfate, fluoride, nitrite and nitrate ions did not interfere with phosphate detection. Furthermore, the nanobiosensor demonstrated a very high stability with repeated use over two weeks and was successfully used for the determination of phosphate in water samples with an average recovery of 96.6 ± 4.9%.

A nanostructured conductive hydrogels-based biosensor platform for human metabolite detection

The development of a scalable, low-cost, and versatile biosensor platform for the sensitive and rapid detection of human metabolites is of great interest for healthcare, pharmaceuticals, and medical science. On the basis of hierarchically nanostructured conducting polymer hydrogels, we designed a flexible biosensor platform that can detect various human metabolites, such as uric acid, cholesterol, and triglycerides. Owing to the unique features of conducting polymer hydrogels, such as high permeability to biosubstrates and rapid electron transfer, our biosensors demonstrate excellent sensing performance with a wide linear range (uric acid, 0.07-1 mM; cholesterol, 0.3-9 mM, and triglycerides, 0.2-5 mM), high sensitivity, low sensing limit, and rapid response time (∼3 s). Given the facile and scalable processability of hydrogels, the proposed conductive hydrogels-based biosensor platform shows great promise as a low-cost sensor kit for healthcare monitoring, clinical diagnostics, and biomedical devices.

Retracted Article: Multiwalled carbon nanotube wrapped nanoflake graphene composites for sensitive biosensing of leviteracetum

Current research work presents the detection of leviteracetum by using nanoflakes of graphene (GNF) and multiwalled carbon nanotube (MWCNT) decorated on fluorine-doped tin oxide (FTO) glass as sensing platform.

Bioelectrocatalytic sensor for triglycerides in human skin sebum based on enzymatic cascade reaction of lipase, glycerol kinase and glycerophosphate oxidase

We report the development of an electrochemical biosensor for the quantification of triglycerides in human skin sebum, based on a multienzyme cascade reaction. The presence of excessive triglycerides in human sebum is one of the leading causes of various skin ailments. However, to the best of our knowledge, no bioelectrocatalytic approach for the quantification of sebum triglycerides has been made. In order to develop triglyceride biosensor, we fabricated a multienzyme-associated electrode incorporating lipase, glycerol kinase, and glycerophosphate oxidase. Enzymes were deposited by electrostatic force and further stabilized via crosslinking between enzymes and polymer matrices. The enzyme-modified biosensing electrode maintained its bioelectrocatalytic activity for five days. An additional constraint was the limited solubility of sebum triglycerides in aqueous electrolytes, impeding the analysis. To address this issue, triglyceride samples were prepared in the form of micelles, enabling efficient sample preparation for biosensor signaling. Calibration tests revealed that the designed assay had a detection range of 15-200mg/dL of micellar triglyceride, which covered the required determination range. The developed biosensing approach was successfully used to determine triglyceride concentrations in real sebum samples of unknown triglyceride content.

Recent advances in ZnO nanostructures and thin films for biosensor applications: review

Biosensors have shown great potential for health care and environmental monitoring. The performance of biosensors depends on their components, among which the matrix material, i.e., the layer between the recognition layer of biomolecule and transducer, plays a crucial role in defining the stability, sensitivity and shelf-life of a biosensor. Recently, zinc oxide (ZnO) nanostructures and thin films have attracted much interest as materials for biosensors due to their biocompatibility, chemical stability, high isoelectric point, electrochemical activity, high electron mobility, ease of synthesis by diverse methods and high surface-to-volume ratio. ZnO nanostructures have shown the binding of biomolecules in desired orientations with improved conformation and high biological activity, resulting in enhanced sensing characteristics. Furthermore, compatibility with complementary metal oxide semiconductor technology for constructing integrated circuits makes ZnO nanostructures suitable candidate for future small integrated biosensor devices. This review highlights recent advances in various approaches towards synthesis of ZnO nanostructures and thin films and their applications in biosensor technology.