Development of pectinate-ispagula mucilage mucoadhesive beads of metformin HCl by central composite design

Advances in metformin-delivery systems for diabetes and obesity management

Metformin is a medication that is commonly prescribed to manage type 2 diabetes. It has been used for more than 60 years and is highly effective in lowering blood glucose levels. Recent studies indicate that metformin may have additional medical benefits beyond treating diabetes, revealing its potential therapeutic uses. Oral medication is commonly used to administer metformin because of its convenience and cost-effectiveness. However, there are challenges in optimizing its effectiveness. Gastrointestinal side effects and limitations in bioavailability have led to the underutilization of metformin. Innovative drug-delivery systems such as fast-dissolving tablets, micro/nanoparticle formulations, hydrogel and microneedles have been explored to optimize metformin therapy. These strategies enhance metformin dosage, targeting, bioavailability and stability, and provide personalized treatment options for improved glucose homeostasis, antiobesity and metabolic health benefits. Developing new delivery systems for metformin shows potential for improving therapeutic outcomes, broadening its applications beyond diabetes management and addressing unmet medical needs in various clinical settings. However, it is important to improve drug-delivery systems, addressing issues such as complexity, cost, biocompatibility, stability during storage and transportation, loading capacity, required technologies and biomaterials, targeting precision and regulatory approval. Addressing these limitations is crucial for effective, safe and accessible drug delivery in clinical practice. In this review, recent advances in the development and application of metformin-delivery systems for diabetes and obesity are discussed.

Recent developments in natural biopolymer based drug delivery systems

Targeted delivery of drug molecules to diseased sites is a great challenge in pharmaceutical and biomedical sciences. Fabrication of drug delivery systems (DDS) to target and/or diagnose sick cells is an effective means to achieve good therapeutic results along with a minimal toxicological impact on healthy cells. Biopolymers are becoming an important class of materials owing to their biodegradability, good compatibility, non-toxicity, non-immunogenicity, and long blood circulation time and high drug loading ratio for both macros as well as micro-sized drug molecules. This review summarizes the recent trends in biopolymer-based DDS, forecasting their broad future clinical applications. Cellulose chitosan, starch, silk fibroins, collagen, albumin, gelatin, alginate, agar, proteins and peptides have shown potential applications in DDS. A range of synthetic techniques have been reported to design the DDS and are discussed in the current study which is being successfully employed in ocular, dental, transdermal and intranasal delivery systems. Different formulations of DDS are also overviewed in this review article along with synthesis techniques employed for designing the DDS. The possibility of these biopolymer applications points to a new route for creating unique DDS with enhanced therapeutic qualities for scaling up creative formulations up to the clinical level.

CpG ODN/Mangiferin Dual Delivery through Calcium Alginate Hydrogels Inhibits Immune-Mediated Osteoclastogenesis and Promotes Alveolar Bone Regeneration in Mice

The immune system plays an important role in the skeletal system during bone repair and regeneration. The controlled release of biological factors from the immune system could facilitate and optimize the bone remodeling process through the regulation of the activities of bone cells. This study aimed to determine the effect of the controlled delivery of immunomodulatory biologicals on bone regeneration. Immunostimulatory cytosine-phosphate-guanosine oligodeoxynucleotides (CpG ODN) and glucosylxanthone Mangiferin (MAG)-embedded microbeads were incubated with P. gingivalis-challenged splenocytes, or co-cultured with RAW264.7 cells. The effect of CpG ODN/MAG-containing microbeads on bone regeneration was then tested in vivo in a mouse alveolar bone defect model. The results demonstrated that MAG significantly antagonized P. gingivalis proliferation and reduced the live/dead cell ratio. After the addition of CpG ODN + MAG microbeads, anti-inflammatory cytokines IL-10 and IL-4 were upregulated on day 2 but not day 4, whereas pro-inflammatory cytokine IL-1β responses showed no difference at both timepoints. RANKL production by splenocytes and TRAP+ cell formation of RAW264.7 cells were inhibited by the addition of CpG ODN + MAG microbeads. Alveolar bony defects, filled with CpG ODN + MAG microbeads, showed significantly increased new bone after 4 weeks. In summary, this study evaluated a new hydrogel-based regimen for the local delivery and controlled release of biologicals to repair and regenerate alveolar bony defects. The combined CpG ODN + MAG treatment may promote alveolar bone regeneration through the anti-microbial/anti-inflammatory effects and the inhibition of RANKL-mediated osteoclastogenesis.

A comprehensive review on pharmaceutical uses of plant-derived biopolysaccharides

Biopolysaccharides extracted from plants are mainly photosynthetic byproducts found in leaves, pods, stems, fruits, grains, seeds, corms, rhizomes, roots, bark exudates, and other plant parts. Recently, these plant-derived biopolysaccharides have received a great deal of attention as pharmaceutical excipients in a range of different dosage forms because of several key advantages, such as widespread accessibility from nature as plant-based sources are readily available, sustainable production, availability of easy and cost-effective extraction methodologies, aqueous solubility, swelling capability in the aqueous medium, non-toxicity, biodegradability, etc. The current review presents a comprehensive overview of the uses of plant-derived biopolysaccharides as effective pharmaceutical excipients in the formulations of different kinds of dosage forms, for example gels, pastes, films, emulsions, suspensions, capsules, tablets, nanoparticles, microparticles, beads, buccal formulations, transdermal formulations, ocular formulations, nasal formulations, etc.

Formulation, optimization, and in-vitro-ex-vivo evaluation of dual-crosslinked zinc pectinate-neem gum-interpenetrating polymer network mediated lansoprazole loaded floating microbeads

Low methoxy pectin (LM pectin) suffers from burst release owing to its high swellability and solubility in water. Consequently, in ways to design an ideal drug delivery system, these obstacles must be surmounted. Therefore, the work aimed to design dual crosslinked LM pectin -neem gum (NG) mediated interpenetrating polymer network (IPN) floating mucoadhesive microbeads for lansoprazole (LNZ) gastro-retentive delivery. In short, LNZ-loaded floating microbeads were achieved by using the ionic gelation method wherein zinc acetate was preferred as a crosslinking agent. The optimization of IPN microbeads was performed employing a 3²-factorial design wherein concentration of pectin and NG was considered as independent factors whereas dependant factors are entrapment efficiency and drug release. Importantly, carboxylic functionality of low methoxy (LM) pectin and hydroxylic functionality NG cross-linked with Zn⁺² forms a 3D network. Diffractogram and thermogram revealed that conversion of drug from crystalline to amorphous form because of entrapment of drug within polymeric network. Anticipated floating microbeads showed that polymer concentration had considerable effect on drug encapsulation efficiency and drug release. Briefly, optimizing floating microbeads (Batch B:5) showed maximum drug entrapment (87.47 %) with a delayed drug release (69.20 %, at 8 h) due to formation of strong IPN. Moreover, it showed good mucoadhesive aptitude with goat stomach mucosa because of entanglement between gum and mucus layer. In addition, use of calcium silicate assists to modulate floating profile of IPN microbeads. Therefore, designing dual crosslinked zinc-pectinate-NG mediated IPN floating mucoadhesive microbeads will offer a new substitute for floating delivery.

β-cyclodextrin chitosan-based hydrogels with tunable pH-responsive properties for controlled release of acyclovir: design, characterization, safety, and pharmacokinetic evaluation

In this work, series of pH-responsive hydrogels (FMA1-FMA9) were synthesized, characterized, and evaluated as potential carrier for oral delivery of an antiviral drug, acyclovir (ACV). Different proportions of β-cyclodextrin (β-CD), chitosan (CS), methacrylic acid (MAA) and N' N'-methylenebis-acrylamide (MBA) were used to fabricate hydrogels via free radical polymerization technique. Fourier transform infrared spectroscopy confirmed fabrication of new polymeric network, with successful incorporation of ACV. Scanning electron microscopy (SEM) indicated presence of slightly porous structure. Thermal analysis indicated enhanced thermal stability of polymeric network. Swelling studies were carried out at 37 °C in simulated gastric and intestinal fluids. The drug release data was found best fit to zero-order kinetics. The preliminary investigation of developed hydrogels showed a pH-dependent swelling behavior and drug release pattern. Acute oral toxicity study indicated no significant changes in behavioral, clinical, or histopathological parameters of Wistar rats. Pharmacokinetic study indicated that developed hydrogels caused a significant increase in oral bioavailability of ACV in rabbit plasma as compared to oral suspension when both were administered at a single oral dose of 20 mg kg-1 bodyweight. Hence, developed hydrogel formulation could be used as potential candidate for controlled drug delivery of an antiviral drug acyclovir.

Chondroitin: a natural biomarker with immense biomedical applications

Naturally extracted glycosaminoglycan chondroitin sulphate is the reactive product of N-acetylgalactosamine and d-glucuronic acid. Chondroitin sulfate (CS) extracted from Scophthalmus maximus, H. scabra, E. fraudatrix, M. magnum, and H. mexicana has shown remarkable anticoagulant, articular cartilage repair, corneal lesion healing, antidiabetic, and antiproliferative effects. Also, platinum and strontium nanoparticles of chondroitin sulfate are effective in osteoarthritis and exert anti-HSV2 and anti-angiogenic properties. A combination of chondroitin sulfate and RNA lipolexes demonstrates gene silencing effects in liver fibrosis. Chondroitin sulfate has also been used as a carrier for loxoprofen hydrogel preparation. Oligosaccharides of chondroitin sulfate showed effective inhibition of bovine testicular hyaluronidase enzyme as an antibacterial agent during pregnancy. Monoclonal antibody-recognized chondroitin sulfate A was effectively used to treat ameloblastoma. Selenium-chondroitin sulfate nanoparticles demonstrated positive effects in therapy of Kashin-Beck disease (KBD) and osteoarthritis.

Okra (Hibiscus esculentus) gum-alginate blend mucoadhesive beads for controlled glibenclamide release

The utility of isolated okra (Hibiscus esculentus) gum (OG) was evaluated as a potential sustained drug release polymer-blends with sodium alginate in the development of controlled glibenclamide release ionically-gelled beads for oral use. OG was isolated from okra fruits and its solubility, pH, viscosity and moisture content were studied. Glibenclamide-loaded OG-alginate blend beads were prepared using CaCl2 as cross-linking agent through ionic-gelation technique. These ionically gelled beads showed drug entrapment efficiency of 64.19 ± 2.02 to 91.86 ± 3.24%. The bead sizes were within 1.12 ± 0.11 to 1.28 ± 0.15 mm. These glibenclamide-loaded OG-alginate blend beads exhibited sustained in vitro drug release over a prolonged period of 8 h. The in vitro drug release from these OG-alginate beads were followed controlled-release (zero-order) pattern with super case-II transport mechanism. The beads were also characterized by SEM and FTIR. The swelling and degradation of these beads was influenced by the pH of the test medium. These beads also exhibited good mucoadhesivity with goat intestinal mucosa.

Mucoadhesive-floating zinc-pectinate-sterculia gum interpenetrating polymer network beads encapsulating ziprasidone HCl

A novel dual crosslinked low-methoxyl (LM) pectinate-sterculia gum (SG) interpenetrating polymer network (IPN) beads was developed for intragastric ziprasidone delivery. The IPN beads were accomplished by simultaneous ionotropic gelation with zinc acetate and covalent crosslinking with glutaraldehyde. The effects of pectin and SG contents on drug entrapment efficiency (DEE, %), and cumulative drug release after 8h (Q8, %) were studied to optimize the IPN beads using a 3(2) factorial design. The optimized beads encapsulating ziprasidone HCl (F-O) displayed DEE of 87.98±1.15% and Q8 of 58.81±1.50% with excellent buoyancy (floating lag time <2min, % buoyancy at 8h >63%) and good mucoadhesivity with the goat gastric mucosa. In most cases, the drug release behaviour obeyed Higuchi kinetics with anomalous transport mechanism. The Zn-pectinate-SG IPN beads were also characterized by SEM, FTIR, DSC and P-XRD analyses.