Physico-chemical characterization of galactan exopolysaccharide produced by Weissella confusa KR780676

Purification, characterization, and hypoglycemic activity of exopolysaccharides from Lactiplantibacillus plantarum MY04

As natural polymers, Lactiplantibacillus plantarum exopolysaccharides (EPS) possess a wide range of bioactivities but suffer from low yields and unclear relationships between functional activity and structure. To this end, the chemical structure and bioactive properties of EPS from Lactiplantibacillus plantarum MY04 were investigated. As a result, three polysaccharide fractions (EPS-1, EPS-2, EPS-3) were separated and purified, of which EPS-2 had better antioxidant activity and α-glucosidase inhibitory ability. More importantly, EPS-2 can significantly enhance insulin sensitivity in HepG2 cells by upregulating enzyme activities in the glycolytic pathway and mitigating oxidative stress-induced damage. In addition, the structural characterization of EPS-2 was also comprehensively elucidated. It was found that EPS-2 was mainly composed of mannose with a molecular weight of 2.3 × 106 Da, and its main chain structure is →3)-Manp-(1 → 2)-Manp-(1 → 2,6)-Manp-(1 → 2,6)-Manp-(1→, providing a theoretical basis for understanding the relationship between structure and function of polysaccharides.

Characterization of Chilean hot spring-origin Staphylococcus sp. BSP3 produced exopolysaccharide as biological additive

A type of high molecular weight bioactive polymers called exopolysaccharides (EPS) are produced by thermophiles, the extremophilic microbes that thrive in acidic environmental conditions of hot springs with excessively warm temperatures. Over time, EPS became important as natural biotechnological additives because of their noncytotoxic, emulsifying, antioxidant, or immunostimulant activities. In this article, we unravelled a new EPS produced by Staphylococcus sp. BSP3 from an acidic (pH 6.03) San Pedro hot spring (38.1 °C) located in the central Andean mountains in Chile. Several physicochemical techniques were performed to characterize the EPS structure including Scanning electron microscopy-energy dispersive X-ray spectroscopy (SEM-EDS), Atomic Force Microscopy (AFM), High-Performance Liquid Chromatography (HPLC), Gel permeation chromatography (GPC), Fourier Transform Infrared Spectroscopy (FTIR), 1D Nuclear Magnetic Resonance (NMR), and Thermogravimetric analysis (TGA). It was confirmed that the amorphous surface of the BSP3 EPS, composed of rough pillar-like nanostructures, is evenly distributed. The main EPS monosaccharide constituents were mannose (72%), glucose (24%) and galactose (4%). Also, it is a medium molecular weight (43.7 kDa) heteropolysaccharide. NMR spectroscopy demonstrated the presence of a [→ 6)-⍺-D-Manp-(1 → 6)-⍺-D-Manp-(1 →] backbone 2-O substituted with 1-⍺-D-Manp. A high thermal stability of EPS (287 °C) was confirmed by TGA analysis. Emulsification, antioxidant, flocculation, water-holding (WHC), and oil-holding (OHC) capacities are   also studied for biotechnological industry applications. The results demonstrated that BSP3 EPS could be used as a biodegradable material for different purposes, like flocculation and natural additives in product formulation.

Production, purification, and functional characterization of glucan exopolysaccharide produced by Enterococcus hirae strain OL616073 of fermented food origin

Microbial exopolysaccharides (EPS) are high molecular weight polymeric substances with great diversity and variety of applications in the food and pharma industry. In this study, we report the extraction of an EPS from Enterococcus hirae OL616073 strain originally isolated from Indian fermented food and its purification by ion exchange and size exclusion chromatography for physical-functional analyses. The EPS showed two prominent fractions (EPS F1 and EPS F2) with molecular mass 7.7 × 104 and 6.5 × 104 Da respectively by gel permeation chromatography. These fractions were further characterized by FTIR, HPTLC, GC-MS, and NMR as a homopolysaccharide of glucose linked with α-(1 → 6) and α-(1 → 3) glycosidic linkages. The porous, spongy, granular morphology of EPS was observed under scanning electron microscopy. EPS has revealed strong physico-functional properties like water solubility index (76.75 %), water contact angle (65.74°), water activity (0.35), hygroscopicity (3.05 %), water holding capacity (296.19 %), oil holding capacity (379.91 %), foaming capacity (19.58 %), and emulsifying activity (EA1-72.22 %). Rheological analysis showed that aqueous solution of EPS exhibited a non-Newtonian fluid behavior and shear-thinning characteristics. Overall, EPS exhibits techno functional properties with potential applications as a functional biopolymer in food and pharma industry.

Similarities and differences of nano-sized levan synthesized by Bacillus haynesii at low and high temperatures: Characterization and bioactivity

Levan is a biopolymer with many different uses. Temperature is an important parameter in biopolymer synthesis. Herein, levan production was carried out from Bacillus haynesii, a thermophilic microorganism, in the temperature range of 4 °C-95 °C. The highest levan production was measured as 10.9 g/L at 37 °C. The synthesized samples were characterized by FTIR and NMR analysis. The particle size of the levan samples varied between 153 and 824.4 nm at different temperatures. In levan samples produced at high temperatures, the water absorption capacity is higher in accordance with the particle size. Irregularities were observed in the surface pores at temperatures of 60 °C and above. The highest emulsion capacity of 83.4 % was measured in the sample synthesized at 4 °C. The antioxidant activity of all levan samples synthesized at different temperatures was measured as 84 % on average. All synthesized levan samples showed antibacterial effect on pathogenic bacteria. In addition, levan synthesized at 45 °C showed the highest antimicrobial effect on E. coli ATCC 35218 with an inhibition zone of 21.3 ± 1.82 mm. Antimicrobial activity against yeast sample C. albicans, was measured only in levan samples synthesized at 80 °C, 90 °C, 95 °C temperatures. Levan synthesized from Bacillus haynesii at low and high temperatures showed differences in characterization and bioactivity.

Improved production of lactiplantibacillus plantarum RO30 exopolysaccharide (REPS) by optimization of process parameters through statistical experimental designs

BACKGROUND

In investigating of (exopolysaccharide) EPS from unconventional sources, lactic acid bacteria have a vital role due to their generally recognized as safe (GRAS) status. EPSs have diverse applications such as drug delivery, antimicrobial activity, surgical implants, and many more in many sectors. Despite being important, the main hindrance to the commercial application of these significant biopolymers is low productivity. Therefore, this study primarily focuses on optimizing physio-chemical conditions to maximize the previously produced EPS from probiotic Lactiplantibacillus plantarum RO30 (L. plantarum RO30) using one factor at a time (OFAT) and method Response Surface Methodology (RSM).

RESULTS

The EPS obtained from L. plantarum RO30 named REPS. The medium formulation for REPS production using the OFAT method revealed that sucrose (20 g/L, beef extract (25 g/L), and ammonium sulfate at 4 g/L concentration were the optimum carbon, organic and inorganic nitrogen sources, and REPS yield was increased up to 9.11 ± 0.51 g/L. RSM experiments revealed that, a greatly significant quadratic polynomial attained from the Central Composite Design (CCD) model was fruitful for specifying the most favorable cultural conditions that have significant consequences on REPS yield. The maximal amount of REPS (10.32 g/L) was formed by: sucrose (40 g/L), beef extract (25 g/L), pH (5.5), incubation temperature (30 °C), and incubation period (72 h). A high closeness was obtained between the predicted and experimental values and it displayed the efficiency of the RSM.

CONCLUSION

This study was conducted to reinforce REPS production in the probiotic LAB L. plantarum RO30 by utilizing various experimental parameters. The maximum REPS yield of 10.32 g/L was attained under the circumstances optimized in the study.

Physicochemical Characterization of Dextran HE29 Produced by the Leuconostoc citreum HE29 Isolated from Traditional Fermented Pickle

In this study, lactic acid bacteria (LAB) strains were isolated from traditional fermented pickles, and among the identified strains, Leuconostoc citreum HE29 with a strong slimy colony profile was further selected to determine the physicochemical and techno-functional properties of its exopolysaccharide (EPS). Glucose was the only sugar monomer in the core unit of EPS HE29 detected by HPLC analysis, and glucan HE29 revealed 7.3 kDa of molecular weight. Structural characterization of glucan HE29 by 1H and 13C NMR spectroscopy analysis demonstrated that EPS HE29 was a dextran-type EPS containing 5.3% levels of (1 → 3)-linked α-D-glucose units. This structural configuration was also supported by FT-IR analysis, which also demonstrated the functional groups within the dextran HE29 structure. In terms of thermal properties detected by TGA and DSC analysis, dextran HE29 demonstrated a degradation temperature of around 280 °C, showing its strong thermal features. A semi-crystalline nature was observed for dextran HE29 detected by XRD analysis. Finally, AFM and SEM analysis revealed tangled network-like properties and web-like branched structures for dextran HE29, respectively. These findings suggest the importance of plant-based fermented products as LAB sources in obtaining novel EPS structures with potential techno-functional roles.

Exopolysaccharide from Lactococcus hircilactis CH4 and Lactobacillus delbrueckii GRIPUMSK as new therapeutics to treat biofilm pathogens, oxidative stress and human colon adenocarcinoma

Naturally occurring biopolymers like exopolysaccharides (EPS) secreted by lactic acid bacteria (LAB) has gained significant attention as they are cost effective, renewable and safe. In order to prevent the rapid increase in antibiotic resistant bacteria, the EPS of LAB offers novel approach of targeting the antibiotic resistant pathogens by limiting their effects on environment. Accordingly, in this study, the production, purification, characterization and biological properties of exopolysaccharides from Lactococcus hircilactis strain CH4 and Lactobacillus delbrueckii strain GRIPUMSK were performed. The optimization of lactic acid bacterial strains for exopolysaccharide production was done by response surface methodology and changing the carbon sources in the growth media. The carbohydrate and protein of exopolysaccharide 1 were 79.7 % and 8.7 % respectively and exopolysaccharide 2 were 75.2 % and 9.3 % respectively. When compared with the commercial emulsifier sodium dodecyl sulfate, both the exopolysaccharides have shown good emulsifying activity. Both the exopolysaccharides were linear homo-polysaccharide as determined by Fourier transform infrared spectroscopy and Nuclear magnetic resonance spectra. Scanning electron microscopy showed that the exopolysaccharides were porous and capable of holding water. The exopolysaccharides were partially crystalline as confirmed by X-ray diffraction spectra. Exopolysaccharides from L. hircilactis and L. delbrueckii exhibited significant antimicrobial activity against H. pylori, S. flexneri, S. pyogenes, E. faecalis and C. albicans. Both the exopolysaccharides revealed significant 2,2-diphenyl-1-picrylhydrazyl and hydrogen peroxide scavenging ability with the IC50 value of 100 μg/ml and 80 μg/ml respectively. Exopolysaccharides from L. hircilactis and L. delbrueckii at 100 μg/ml showed significant anticancer activity on HT-29 cells with 58.4 % and 58.7 % respectively. These findings proved that exopolysaccharides from the two selected lactic acid bacterial strains could be explored as natural bioactive carbohydrate polymer for biomedical applications.

Physicochemical and rheological characterizations of a novel exopolysaccharide EPSKar1 and its iron complex EPSKar1-Fe: Towards potential iron-fortification applications

Iron is a micronutrient essential for human health and physiology. Iron-deficiency anemia, the most common form of anemia, may occur from an iron homeostasis imbalance. Iron fortification is a promising and most sustainable and affordable solution to tackle the global prevalence of this anemia. Herein, we investigate physicochemical, rheological and stability characteristics of a novel exopolysaccharide 'EPSKar1' (derived from Lacticaseibacillus rhamnosus strain Kar1) and its iron complex 'EPSKar1-Fe (II)'. Our findings demonstrate that EPSKar1 is a high molecular-weight (7.8 × 10⁵ Da) branched-chain heteropolysaccharide composed of galactose, N-acetylglucosamine, and mannose in a molar ratio of 8:4:1, respectively, and exhibits strong emulsifying and water-holding capacities. We find that EPSKar1 forms strong complexes with Fe, wherein the interactions between EPSKar1-Fe (II) complexes are mediated by sulfate, carboxyl, and hydroxyl groups. The rheological analyses reveal that the EPSKar1 and EPSKar1-Fe (II) complexes exhibited shear thickening and thinning properties in skim milk and water, respectively; however, the suspension of EPSKar1 in skim milk is viscoelastic with predominantly elastic response (G'>G" and tan δ < 1). In comparison, EPSKar1-Fe (II) complex exhibits remarkable stability under various processing conditions, highlighting its usefulness for the development of fortified dairy products. Together, these findings underpin considerable prospects of EPSKar1-Fe (II) complex as a novel iron-fortifier possessing multifarious rheological benefits for food applications.

Optimization and Characterization of a Novel Exopolysaccharide from Bacillus haynesii CamB6 for Food Applications

Extremophilic microorganisms often produce novel bioactive compounds to survive under harsh environmental conditions. Exopolysaccharides (EPSs), a constitutive part of bacterial biofilm, are functional biopolymers that act as a protecting sheath to the extremophilic bacteria and are of high industrial value. In this study, we elucidate a new EPS produced by thermophilic Bacillus haynesii CamB6 from a slightly acidic (pH 5.82) Campanario hot spring (56.4 °C) located in the Central Andean Mountains of Chile. Physicochemical properties of the EPS were characterized by different techniques: Scanning electron microscopy- energy dispersive X-ray spectroscopy (SEM-EDS), Atomic Force Microscopy (AFM), High-Performance Liquid Chromatography (HPLC), Gel permeation chromatography (GPC), Fourier Transform Infrared Spectroscopy (FTIR), 1D and 2D Nuclear Magnetic Resonance (NMR), and Thermogravimetric analysis (TGA). The EPS demonstrated amorphous surface roughness composed of evenly distributed macromolecular lumps. GPC and HPLC analysis showed that the EPS is a low molecular weight heteropolymer composed of mannose (66%), glucose (20%), and galactose (14%). FTIR analysis demonstrated the polysaccharide nature (-OH groups, Acetyl groups, and pyranosic ring structure) and the presence of different glycosidic linkages among sugar residues, which was further confirmed by NMR spectroscopic analyses. Moreover, D-mannose α-(1→2) and α-(1→4) linkages prevail in the CamB6 EPS structure. TGA revealed the high thermal stability (240 °C) of the polysaccharide. The functional properties of the EPS were evaluated for food industry applications, specifically as an antioxidant and for its emulsification, water-holding (WHC), oil-holding (OHC), and flocculation capacities. The results suggest that the study EPS can be a useful additive for the food-processing industry.

Effects of Fly Maggot Protein Replacement of Fish Meal on Growth Performance, Immune Level, Antioxidant Level, and Fecal Flora of Blue Foxes at Weaning Stage

Simple Summary

Given the shortage of fish meal, other animal protein replacements are actively being researched. One such alternative is fly maggot protein—a highly nutritious insect protein containing chitin, lysozyme, and other biologically active substances. The purpose of this study was to examine how the replacement of fish meal with fly maggot protein affects growth, immune indexes, antioxidant levels, and fecal microflora in blue foxes (Alopex lagopus) during weaning. The results showed that fly maggot protein replacement had no adverse effects on the growth, immune indexes, and antioxidant levels of blue foxes at weaning. Further, it could modulate the fecal microflora. This indicates that fly maggot protein can serve as a novel animal protein alternative to fish meal for feeding blue foxes.

Abstract

Dietary protein is a key nutritional parameter and warrants special attention in animal husbandry. This study aimed to evaluate the effect of replacing fish meal (F) with fly maggot protein (M) on the growth performance, antioxidant levels, immune indexes, and fecal microflora in weaned blue foxes (Alopex lagopus). Twenty weaned blue foxes were randomly assigned to the control (F diet; 6% of F) or experimental (M diet; F substituted by M) group (10 blue foxes per group). The duration of the trial was 28 days. The results showed that there was no significant difference in average daily gain between group M and group F during the experiment (p = 0.473). Moreover, the diarrhea index was similar between group M and group F during the entire experimental period (p = 0.112). At the end of the experiment, the levels of IL-6 and IgG in group M at 28 d were significantly higher than that in group F (p = 0.004, p = 0.025, respectively), but not IL-1β, IL-2, SIgA, IgM, and TNF-α. The levels of SOD in group M at 28 d were significantly higher than those in group F (p = 0.001), and no difference of MDA and T-AOC was found between group F and M (p = 0.073, p = 0.196, respectively). In both groups, the diversity of fecal microbes first increased and then decreased with the progress of the experimental period. Initially, there were differences in the composition of microbial communities between the two groups. However, this difference was attenuated at later stages of the experimental period. In conclusion, fly maggot protein can replace fish meal as a source of animal protein in feed material for blue foxes during the weaning period.

Exopolysaccharides production from marine Bacillus strains and their antioxidant and bio-flocculant capacities

Microbial exopolysaccharides (EPS) have gained high scientific concern due to their exceptional physicochemical features and high industrial applicability. Owing to their biotechnological importance, the present study was designed to screen and isolate the EPS-producing Bacillus strains based on their growth potential on specific media and colony morphologies. The bacterial isolates Bacillus subtilis Bs1-01, Bacillus licheniformis Bl1-02, and Bacillus brevis Bb1-04 showed excellent EPS production due to their shortened lag phase and abundant biomass production. Shake-flask fermentation valued the maximum production yield of 50.19 ± 1.14 g/L by Bl1-02 after 72 h incubation (about 3.40 times higher than that of Bacillus thuringiensis Bt1-05). The basic component analysis revealed the improved amount of total carbohydrate, reducing sugar ends, and protein contents by Bl1-02 strain. Structural characteristics and functional groups of the EPS characterized by Fourier transform infrared spectroscopy demonstrated that all EPS were in close agreement to each other due to the presence of similar chemical bonds and functional groups. EPS from Bl1-02 strain showed stronger and more stable bio-emulsifying and hygroscopicity activities (12.23%). The crude EPS exhibited potent antioxidant properties which were examined against reducing potential (H₂O₂ scavenging) and total antioxidant tests. Among bio-flocculation activities of EPS at different concentrations, Bs1-01 strain produced EPS at a concentration of 60 mg/mL was observed to show the maximum value of 79.20%. In conclusion, the EPS from marine Bacillus strains showed excellent functional properties suggesting potential industrial applications that demand separate investigations.

Oxidative stress alleviating potential of galactan exopolysaccharide from Weissella confusa KR780676 in yeast model system

In the present study, galactan exopolysaccharide (EPS) from Weissella confusa KR780676 was evaluated for its potential to alleviate oxidative stress using in vitro assays and in vivo studies in Saccharomyces cerevisiae (wild type) and its antioxidant (sod1∆, sod2∆, tsa1∆, cta2∆ and ctt1∆), anti-apoptotic (pep4∆ and fis1∆) and anti-aging (sod2∆, tsa1∆ and ctt1∆)) isogenic gene deletion mutants. Galactan exhibited strong DPPH and nitric oxide scavenging activity with an IC₅₀ value of 450 and 138 µg/mL respectively. In the yeast mutant model, oxidative stress generated by H₂O₂ was extensively scavenged by galactan in the medium as confirmed using spot assays followed by fluorescencent DCF-DA staining and microscopic studies. Galactan treatment resulted in reduction in the ROS generated in the yeast mutant cells as demonstrated by decreased fluorescence intensity. Furthermore, galactan exhibited protection against oxidative damage through H₂O₂ -induced apoptosis inhibition in the yeast mutant strains (pep4∆ and fis1∆) leading to increased survival rate by neutralizing the oxidative stress. In the chronological life span assay, WT cells treated with galactan EPS showed 8% increase in viability whereas sod2∆ mutant showed 10–15% increase indicating pronounced anti-aging effects. Galactan from W. confusa KR780676 has immense potential to be used as a natural antioxidant for nutraceutical, pharmaceutical and food technological applications. As per our knowledge, this is the first report on in-depth assessment of in vivo antioxidant properties of a bacterial EPS in a yeast deletion model system.

Characterization of an exopolysaccharide (EPS-3A) produced by Streptococcus thermophilus ZJUIDS-2-01 isolated from traditional yak yogurt

Yak yogurt, one of the naturally fermented dairy products prepared by local herdsmen in the Qinghai-Tibet Plateau, contains a diverse array of microorganisms. We isolated and identified a novel Streptococcus thermophilus strain, ZJUIDS-2-01, from the traditional yak yogurt. We further purified and carried out detailed structural, physiochemical, and bioactivity studies of an exopolysaccharide (EPS-3A) produced by S. thermophilus ZJUIDS-2-01. The weight-average molecular weight (Mw) of EPS-3A was estimated to be 1.38 × 10⁶ Da by High-Performance Gel Permeation Chromatography (HPGPC). The monosaccharide analysis established its composition to be glucose, galactose, N-acetyl-D-galactosamine, and rhamnose in a ratio of 5.2:2.5:6.4:1.0. The molecular structure of EPS-3A was determined by the combination of permethylation analysis, FT-IR, and NMR spectroscopic techniques. The ζ-potential measurements indicated that EPS-3A had a pKa value of ~4.40. The DSC yielded a melting point (T_m) of 80.4 °C and enthalpy change (ΔH) of 578 J/g for EPS-3A, comparable to those of the xanthan gum (XG), a commercial EPS. EPS-3A exhibited better O/W emulsion stability and flocculating capacity than XG. Furthermore, it also demonstrated similar antioxidant activity to XG and promising in vitro antibacterial properties. This work evidenced that EPS-3A derived from S. thermophilus ZJUIDS-2-01 holds the potential for food and industrial applications.

Bacterial exopolysaccharides for improvement of technological, functional and rheological properties of yoghurt

Exopolysaccharides (EPS) are known to have technological and functional applications in food industry including dairy based products such as yoghurt. Yoghurt is a widely consumed dairy based product due to pleasant taste and texture, as well as a source of nutrients and bioactive compounds. At the same time, structural, rheological and sensorial properties are important in the production of good quality yoghurt. Various natural hydrocolloids including EPS with stabilizing and texture enhancing properties could be useful in enhancing these desirable properties. Apart from that, EPS may enhance various other functional properties of yoghurt such as antioxidant and prebiotic potential. Based on its prebiotic property, symbiotic products could be developed by combining EPS and probiotic bacterial strains. EPS has potential to provide physical and micro structural stability, thereby enhancing the protein distribution and viscoelastic properties. Main focus of the present review is to provide an insight on the action of EPS as a functional hydrocolloid on the technological, rheological and functional properties of yoghurt and related products.

Isolation and functional characterization of exopolysaccharide produced by Lactobacillus plantarum S123 isolated from traditional Chinese cheese

During the past few years, there are growing interests in the potential use of exopolysaccharide (EPS) in the food industry as an efficient biopolymer because of its exceptional biological features. Therefore, the aim of the present study is EPS production by Lactobacillus Plantarum S123 (S123 EPS), its partial structural and biopotential characterization. The results from this study suggested that the major portion of S123 EPS has an amorphous sponge-like structure with partial crystalline nature. The FTIR and NMR results suggested that the S123 EPS consists of carbonyl and hydroxyl groups, respectively. Furthermore, the results of technological as well as biotechnological characterization suggested that the S123 EPS was exhibited excellent antibacterial activity against Gram-positive (7.2 mm) and Gram-negative bacteria (11.5 mm), DPPH radical scavenging activity (> 65%), water holding capacity (326.6 ± 0.5%), oil holding capacity (995.3 ± 0.2%), flocculation (89.5 ± 0.6%), and emulsifying (80.1 ± 1.1%) activities. Overall, the present results suggested that due to the highly porous structure and efficient biotechnological potential, S123 EPS from Lactobacillus plantarum S123 (L. plantarum S123) can be used in the functional food product.

Techno-functional properties of HoPS from lactic acid bacteria of different origins as potential food additives

Homopolysaccharides (HoPS) produced by lactic acid bacteria (LAB) are highly versatile, biocompatible and safe compounds. In this work, six HoPS from different species of Weisella and Leuconostoc were identified as thermally stable dextrans, with endothermic crystalline deformations between 214 and 239 °C. These dextrans proved to have greater solubility and capacities to retain water and oil than similar polymers in other reports. Furthermore, a surface morphology study presented cubic grumps, stratify mesh with irregular grumps, and highly compact filaments. Assays in vitro revealed moderate antioxidant, browning and foaming activities as well as technological properties, such as anti-syneresis, emulsifying and flocculating activities, even at low concentrations. Taking into account bipolymers' microstructure, functionalities and performance in both, aqueous and hydrophobic matrixes, plus their capacity to maintain themselves at elevated temperatures, we consider these HoPS beneficial and natural food additives.

Characterization of exopolysaccharides produced by Weissella confusa XG-3 and their potential biotechnological applications

In this study, exopolysaccharides (EPSs) produced by Weissella confusa XG-3 were characterized. The monosaccharide composition of XG-3 EPS was determined to include glucose according to GC data, and its molecular weight was 3.19 × 10⁶ Da, as determined by HPLC. Scanning electron microscopy (SEM) revealed a smooth, porous, and branched structure, and atomic force microscopy (AFM) confirmed the presence of round lumps and chains on irregular surfaces of XG-3 EPS. The results of the Fourier transform infrared (FT-IR) and nuclear magnetic resonance (NMR) analyses suggested that XG-3 EPS is a linear α-(1,6)-linked dextran. X-ray diffraction (XRD) data confirmed the noncrystalline amorphous structure, and the results of the Congo red assay corresponded to the random coiled chain conformation of XG-3 dextran. XG-3 dextran exhibited good radical scavenging activity and reducing power and possessed high thermal stability, with a degradation temperature (Td) of 306.8 °C. The absolute value of the zeta potential and particle size of XG-3 dextran continually increased with increasing dextran concentration. The water contact angle showed that XG-3 dextran had relatively high hydrophobicity in the presence of sucrose. XG-3 dextran stimulated the growth of Lactobacillus spp. and Bifidobacterium spp. These findings indicate that XG-3 dextran has unique characteristics and can be potentially applied as a food additive and an antioxidant.

Weissella: An Emerging Bacterium with Promising Health Benefits

Weissella strains have been the subject of much research over the last 5 years because of the genus' technological and probiotic potential. Certain strains have attracted the attention of the pharmaceutical, medical, and food industries because of their ability to produce antimicrobial exopolysaccharides (EPSs). Moreover, Weissella strains are able to keep foodborne pathogens in check because of the bacteriocins, hydrogen peroxide, and organic acids they can produce; all listed have recognized pathogen inhibitory activities. The Weissella genus has also shown potential for treating atopic dermatitis and certain cancers. W. cibaria, W. confusa, and W. paramesenteroides are particularly of note because of their probiotic potential (fermentation of prebiotic fibers) and their ability to survive in the gastrointestinal tract. It is important to note that most of the Weissella strains with these health-promoting properties have been shown to be save safe, due to the absence or the low occurrence of virulence or antibiotic-resistant genes. A large number of scientific studies continue to report on and to support the use of Weissella strains in the food and pharmaceutical industries. This review provides an overview of these studies and draws conclusions for future uses of this rich and previously unexplored genus.

Structural elucidation and interfacial properties of a levan isolated from Bacillus mojavensis

A strain with high exopolysaccharide (EPS) production was isolated from soil and identified as Bacillus mojavensis based on the 16S rRNA gene sequencing and biochemical properties. The EPS produced simultaneously with the growth phase reached a maximum of 22 g/L after attaining a stationary phase with sucrose used as sole carbon source. B. mojavensis EPS (BM-EPS) was recovered, fractionated by ethanol precipitation and analysed by NMR and methylation analyses. The BM-EPS was found to be composed of (β2 → 6)-Fruf residues, characteristic of a levan, with an average molecular weight of 2.3 MDa. A homogeneous micro-porous and rough structure matrix was observed by SEM of the freeze-dried powdered sample. A concentration-dependent water-soluble nature was observed, with good water (5.3 g/g) and oil (36 g/g) holding capacities. The levan displayed good emulsification activity with excellent stability against food grade oil, thus favoring it as a promising emulsifying agent to food industries.

Overview of exopolysaccharides produced by Weissella genus - A review

Exopolysaccharides (EPS) from lactic acid bacteria (LAB) are much diversed in structure, composition and applications which also adding a great commercial potential due to its generally recognized as safe (GRAS) status. LAB genus such as Lactobacillus, Leuconostoc, Streptococcus, Weissella, Lactococcus are known to produce EPS. Among this genus, Weissella is enormously reported for diversity and high production of EPS with wide range of industrial applications and bio-functional properties. This review summarize in detail about the Weissella EPS from genus to functional application. Physico-chemical characterization from production, purification step to structural elucidation of Weissella EPS is comprehensively discussed along with their properties. Weissella genus has revealed various EPS with significant functional potentials, making massive application in food and pharma industries as viscosifiers, biothickener, emulsifiers and stabilizers. In addition to this, biological properties of these EPS revealed multiple health promoting properties which can be explored for further applications in food and pharmaceutical sectors.

Characterization, the Antioxidant and Antimicrobial Activity of Exopolysaccharide Isolated from Poultry Origin Lactobacilli

The natural antioxidant agent is urgently needed to prevent the negative effects of newly generated free radicals and chronic disorders. Recently, the microbial exopolysaccharide (EPS) is currently used as a potential biopolymer due to its unique biological characteristics. In this study, the biological potential was carried out on the EPSs produced by Lactobacillus reuteri SHA101 (EPS-lr) and Lactobacillus vaginalis SHA110 (EPS-lvg) isolated from gut cecum samples of healthy poultry birds (hen). As results, the EPS-lr and EPS-lvg showed the emulsifying activity of 37.8 ± 1.6% and 27.8 ± 0.5% after the 360 h, respectively. The scanning electron microscopy analysis of EPS-lr and EPS-lvg demonstrated a smooth surface with a compact structure. The both EPSs exhibited strong antibacterial activity against E. coli and Salmonella typhimurium in vitro. In additions, at 4 mg/mL concentration, the EPS-lr and EPS-lvg samples showed potent antioxidant activity regarding hydroxyl radical DPPH (2,2-diphenyl-1-picrylhydrazyl) radical, superoxide anion radical and reducing power at OD_700 nm. Furthermore, the EPS-lr and EPS-lvg (600 μg/mL) possessed antitumor activity against colon cancer (Caco-2) cell after 72 h. The results suggested that these EPSs would have great potential in the application of antitumor and antioxidant foods, biomedicine, and pharmaceutics.

Structural and physicochemical characterisation and antioxidant activity of an α-D-glucan produced by sourdough isolate Weissella cibaria MED17

An exopolysaccharide (EPS) producer slimy-mucoid type colony was isolated from sourdough and identified as Weissella cibaria MED17. The ¹H and ¹³C NMR spectra of EPS MED17 demonstrated that this EPS was a dextran type glucan ((1 → 6)-linked α-D-glucose core structure) containing (1 → 3)-linked α-D-glucose branches and proportion of (1 → 6)-linked α-D-glucose units to (1 → 3)-linked α-D-glucose units was 94.3:5.7%. The FTIR analysis also confirmed the (1 → 6)-linked α-D-glucose linkage. A high level of thermal stability was observed for glucan MED17 as no degradation up to 300 °C was observed by TGA and DSC analysis. The XRD analysis of glucan MED17 showed its semi- crystalline nature and its compact sheet-like morphology was observed by SEM analysis. Finally, antioxidant characteristics of glucan MED17 were determined by ABTS and DPPH radical scavenging activity tests that revealed a moderate antioxidant activity of glucan MED17. These findings show potential techno-functional characteristics of glucan MED17.

Nutritive and Bioactive Properties of Mesquite (Prosopis pallida) Flour and Its Technological Performance in Breadmaking

Although the nutritional profile, bioactivities, and uses of mesquite pod flour from various Prosopis species have been studied, limited research has been conducted on Prosopis pallida (Humb, & Bonpl. Ex Willd.) Kunth mesquite flour. This study aimed to characterize the nutritional quality and bioactive properties of P. pallida pod flour and to assess its technological performance in breadmaking as a partial replacer of white wheat flour. Peruvian P. pallida mesquite flour was found to have an appealing nutritional profile, with high contents of dietary fiber (29.6% dw) and protein (9.5% dw), and low contents of fat (1.0% dw) and carbohydrates (57.6% dw). It is a source of palmitic (12.6%), oleic (35.5%), and linoleic acids (45.8%), α-, β-, and γ- tocopherols, and contains phenolic compounds such as apigenin glycoside derivatives with proven antioxidant capacities. Extracts of P. pallida flour were also found to have antimicrobial and antifungal effects and did not show hepatoxicity. When formulated as a wheat flour replacer, increasing mesquite flour levels yield composite doughs of lower stickiness and extensibility, and composite breads of lower elasticity (p < 0.01). However, up to a level of 10%, mesquite flour significantly increases loaf volume, reduces crumb hardness, and produces a more uniform crumb of small size alveoli (p < 0.01). Considering the purpose of improving the nutritional and technological quality of wheat flour bread, the addition of P. pallida pod flour can be highly recommended.

Report on aflatoxin-binding activity of galactan exopolysaccharide produced by Weissella confusa KR780676

Galactan exopolysaccharide (EPS) produced by Weissella confusa KR780676 isolated from an Indian traditional fermented food has been reported earlier. In this manuscript, we have studied aflatoxin-binding ability of this galactan EPS. Aflatoxin B₁ (AFB₁) binding ability of galactan EPS was observed in an increasing trend with increasing EPS concentration (20-100 mg/mL). At lower concentrations (< 20 mg/mL) of EPS, the binding activity was undetectable, while notable binding was seen from 30 mg/mL. Enhanced AFB₁ binding (32.40%) was recorded at 50 mg/mL of EPS and it increased gradually up to 34.79% at 100 mg/mL concentrations of EPS. The intensity of bands in high-performance thin-layer chromatography (HPTLC) analysis confirms the AFB₁ binding efficiency of galactan EPS, which shows its potential application for removal of toxins in food and feed industry. Galactan EPS binding activity to AFB₁ is further studied with particle size analysis (PSA). This is the first study reporting the aflatoxin-binding activity of any kind of EPS from lactic acid bacteria.

Evaluation of oil-in-water (O/W) emulsifying properties of galactan exopolysaccharide from Weissella confusa KR780676

Galactan exopolysaccharide (EPS) was extracted from Weissella confusa KR780676 isolated from idli batter. The present study reports the effect of galactan EPS concentration, pH, ionic strength, temperature, salinity, monovalent salts on the emulsion formed with vegetable oils (virgin coconut oil, groundnut oil, olive oil and mustard oil). Emulsion determination test revealed the oil-in-water type of emulsion. Microscopic observation showed the phase of oil droplet distribution of emulsions. Groundnut and olive oil showed significant emulsifying activity (50-60%) and stability (90%) irrespective of the EPS concentration. One percent of EPS also showed good emulsifying activity (50-70%) and stability (100%) with groundnut and olive oil in wide range of temperature (- 20, 4, 30, 40, 50 and 60 °C), pH (3-8), salinity (1, 5, 10, 20 and 30% of NaCl) and monovalent salt (1, 5, 10, 20 and 30% of KCl). Galactan could be used as a prominent emulsifier for applications in the food industry as it possesses significant activity with most of the influential factors in wide range and also obtained from lactic acid bacteria that are regarded as Generally Regarded as Safe (GRAS).

Physical and functional characterization of succinoglycan exopolysaccharide produced by Rhizobium radiobacter CAS from curd sample

Identification and rheological behaviour of succinoglycan exopolysaccharide (EPS) from Rhizobium radiobacter CAS isolated from curd was published in earlier reports. In current investigation physicochemical and functional properties of CAS EPS has been studied. SEC-MALLS revealed molecular weight (Mw), number molecular weight (Mn) and polydispersity index (PDI) of CAS EPS as 4.05×10⁶g·mol^-1, 3.82×10⁶g·mol^-1 and, 1.06 respectively. Thermogravimetric analysis showed the high thermal stability of CAS polymer where approximately 77% of CAS hydrocolloid maintain physical integrity and stability with temperature degradation (T_d) at 290°C. Scanning electron microscopy and particle size analysis confirmed the porous and hygroscopic nature and 2.049μm size of CAS EPS respectively. Equally important functional properties such as water activity (0.55), water solubility (95%), water contact angle (54.83°), water binding capacity (101g/g), water holding capacity (68.19g/g), oil binding ability (soybean and groundnut oils were found 4.35g/g and 3.68g/g) and swelling index (17.5mL/g) were examined for CAS EPS. Prevention of syneresis has been studied at 1% CAS EPS concentration which significantly prohibited the degree of syneresis of starch. These physico-functional properties make CAS EPS a prominent candidate for food processing and product development sector.

Isolation, purification and characterization of exopolysaccharide produced by Leuconostoc pseudomesenteroides YF32 from soybean paste

A water-soluble exopolysaccharide (EPS)-producing strain YF32 was isolated from soybean paste, which was then identified as Leuconostoc pseudomesenteroides. After culturing the strain in Man-Rogosa-Sharpe (MRS) medium containing 5% sucrose at 30°C for 48h, the EPS was purified, and a yield of 12.5g/L was achieved. The weight-average molecular weight (Mw) was 5.54×106Da by high-performance size-exclusion chromatography (HPSEC). The structural characterization of the purified EPS was determined by gas chromatography (GC), Fourier transform infrared (FT-IR), 1H, 13C nuclear magnetic resonance (NMR) spectroscopy. The results demonstrated that the exopolysaccharide was glucan with a peak, a linear backbone composed of consecutive α-(1→6)-linked d-glucopyranose units. No branching was observed in the dextran structure. The degradation temperature (Td) of EPS was 307.62°C, which suggested that dextran exhibited high thermal stability. YF32 dextran also showed high water solubility and emulsibility. All results suggested that dextran has the potential to be applied in food fields as a food additive.

Combined effect of xanthan gum and water content on physicochemical and textural properties of gluten-free batter and bread

The objective of this study was to evaluate the combined effect of xanthan gum (XG) on physicochemical, rheological and textural properties of gluten-free batter and bread. To prepare gluten-free batter, different levels of XG (1.5, 2.5 and 3.5%) and water (90, 100 and 110%) were added to a base formula of rice (50%), maize (30%) and quinoa flours (20%); and the batters were evaluated in a factorial design. Several properties on both batter (stickiness and back extrusion) and its corresponding bread (loaf specific volume, baking loss, water activity and pH, texture profile, mean cell area, mean cell density, cell size uniformity, void fraction, mean cell compactness and mean cell aspect ratio) were then evaluated. Higher XG doses (p < .001) tended to produce batters of lower stickiness, adhesion and cohesive-strength, yet, of higher firmness, consistency, cohesiveness and viscosity index. After baking, these loaves presented lower specific volume; lower crumb a_w, pH, hardness, springiness, mean cell area and void fraction; and higher (p < .001) chewiness, resilience, mean cell density, cell size uniformity and mean cell compactness. The sticker and less consistent batters produced with higher WC rendered larger bread loaves of softer and more springy/resilient crumbs with greater mean cell size and void fraction. Gluten-free loaves of good appearance in terms of higher specific volume, lower crumb hardness, higher crumb springiness, and open grain visual texture were obtained in formulations with 110% WC and XG doses between 1.5 and 2.5%.