Tough chitosan hydrogel based on purified regeneration and alkaline solvent as biomaterials for tissue engineering applications

Regulating the macroscopic and microscopic self-assembly behavior of hydroxybutyl chitosan based on alkyl distribution

Hydroxybutyl chitosan (HBC), a derivative of chitosan, exhibits biocompatibility and temperature-sensitive properties, rendering it utilized in tissue engineering, and biomedical science. Currently, HBC is mainly prepared based on heterogeneous and homogeneous reactions. However, the impact of reactions on structure of derivatives and their mechanisms for self-assembly remains to be elucidated. Here, we synthesized HBC with homogeneous and heterogeneous modifications separately, and compared the disparities in their structures and assembly processes. The findings revealed that the structure dissimilarities between heterogeneous (Het-HBC) and homogeneous (Hom-HBC) modification of HBC primarily manifested in the distribution of alkyl. In homogeneous reaction, alkyls are uniformly modified to the hydroxyl and amino of chitosan, facilitating intrachain self-assembly and ultimately resulting in nanoparticle formation. In contrast, the alkyl substituents on the Het-HBC exhibit localized concentration or sparsity, promoting interchain assembly to form the porous hydrogel. This work will provide references for the preparation and application of HBC.

Stimuli-responsive carrageenan-based biomaterials for biomedical applications

Carrageenan-based biomaterials have attracted considerable attention in recent years due to their unique biological properties, including their biodegradability, compatibility, and lack of adverse effects. These biomaterials exhibit a variety of beneficial properties, such as antiviral, antitumor, and immunomodulatory effects, which set them apart from other polysaccharides. Stimuli-responsive carrageenan-based biomaterials have attracted particular attention due to their unique properties, such as reducing systemic toxicity and controlling drug release. In this review, a comprehensive investigation of stimuli-responsive carrageenan-based biomaterials was conducted under the influence of various stimuli such as pH, electric field, magnetic field, temperature, light, and ions. These structures exhibited good stimulus-responsive properties and involved corresponding physical and chemical changes, such as changes in swelling ratio and gelling power among others. The biomedical application of carrageenan-based stimuli-responsive biomaterials in the field of tissue engineering, anticancer, antibacterial, and food monitoring has been investigated, showing the great potential of these structures. Although there are promising developments in the design and use of stimuli-responsive carrageenan-based biomaterials, further research is advisable to further investigate their potential applications, particularly in animal models. Extensive studies are needed to investigate the benefits and limitations of these materials to ensure their safety and effective use in biomedical applications.

Hydrogel Films with Impact Resistance by Sacrificial Micelle-Assisted-Alignment

Various strategies are developed to engineer aligned hierarchical architectures in polymer hydrogels for enhanced mechanical performance. However, chain alignment remains impeded by the presence of hydrogen bonds between adjacent chains. Herein, a facile sacrificial micelle-assisted-alignment strategy is proposed, leading to well-aligned, strong and tough pure chitosan hydrogels. The sacrificial sodium dodecyl sulfate micelles electrostatically interact with the protonated chitosan chains, enabling chain sliding and alignment under uniaxial forces. Subsequently, sacrificial micelles can be easily removed via NaOH treatment, causing the reforming of H-bond in the chain networks. The strength of the pure chitosan hydrogels increases 140-fold, reaching 58.9 ± 3.4 MPa; the modulus increases 595-fold, reaching 226.4 ± 42.8 MPa. After drying-rehydration, the strength and modulus further rise to 70.3 ± 2.4 and 403.5 ± 76.3 MPa, marking a significant advancement in high-strength pure chitosan hydrogel films. Furthermore, the designed multiscale architectures involving enhanced crystallinity, well-aligned fibers, strong interfaces, robust multilayer Bouligand assembly contribute to the exact replica of lobster underbelly with impact resistance up to 6.8 ± 1.0 kJ m-1. This work presents a promising strategy for strong, tough, stiff and impact-resistant polymer hydrogels via well-aligned hierarchical design.

Accelerated healing of intractable biofilm-infected diabetic wounds by trypsin-loaded quaternized chitosan hydrogels that disrupt extracellular polymeric substances and eradicate bacteria

Complex and stubborn bacterial biofilm infections significantly hinder diabetic wound healing and threaten public health. Therefore, a dressing material that effectively clears biofilms and promotes wound healing is urgently required. Herein, we introduce a novel strategy for simultaneously dispersing extracellular polymeric substances and eradicating drug-resistant bacteria. We prepared an ultrabroad-spectrum and injectable quaternized chitosan (QCS) hydrogel loaded with trypsin, which degrades biofilm extracellular proteins. Increased temperature initiated QCS gelation to form the hydrogel, enabling the sustained release of trypsin and effective adherence of the hydrogel to irregularly shaped wounds. To reproduce clinical scenarios, biofilms formed by a mixture of Staphylococcus aureus (S. aureus), Methicillin-resistant S. aureus, and Pseudomonas aeruginosa were administered to the wounds of rats with streptozotocin-induced diabetes. Under these severe infection conditions, the hydrogel efficiently suppressed inflammation, promoted angiogenesis, and enhanced collagen deposition, resulting in accelerated healing of diabetic wounds. Notably, the hydrogel demonstrates excellent biocompatibility without cytotoxicity. In summary, we present a trypsin-loaded QCS hydrogel with tremendous clinical applications potential for the treatment of chronic infected wounds.

Construction of chitosan-gelatin polysaccharide-protein composite hydrogel via mechanical stretching and its biocompatibility in vivo

Natural polysaccharides and protein macromolecules are the important components of extracellular matrix (ECM), but individual component generally exhibits weak mechanical property, limited biological function or strong immunogenicity in tissue engineering. Herein, gelatin (Gel) was deposited to the stretched (65 %) chitosan (CS) hydrogel substrates to fabricate the polysaccharide-protein CS-Gel-65 % composite hydrogels to mimic the natural component of ECM and improve the above deficiencies. CS hydrogel substrates under different stretching deformations exhibited tunable morphology, chemical property and wettability, having a vital influence on the secondary structures of deposited fibrous Gel protein, namely appearing with the decreased β-sheet content in stretched CS hydrogel. Gel also produced a more homogenous distribution on the stretched CS hydrogel substrate due to the unfolding of Gel and increased interactions between Gel and CS than on the unstretched substrate. Moreover, the polysaccharide-protein composite hydrogel possessed enhanced mechanical property and oriented structure via stretching-drying method. Besides, in vivo subcutaneous implantation indicated that the CS-Gel-65 % composite hydrogel showed lower immunogenicity, thinner fibrous capsule, better angiogenesis effect and increased M2/M1 of macrophage phenotype. Polysaccharide-protein CS-Gel-65 % composite hydrogel offers a novel material as a tissue engineering scaffold, which could promote angiogenesis and build a good immune microenvironment for the damaged tissue repair.

Application of chitosan with different molecular weights in cartilage tissue engineering

Cartilage tissue engineering involves the invention of novel implantable cartilage replacement materials to help heal cartilage injuries that do not heal themselves, aiming to overcome the shortcomings of current clinical cartilage treatments. Chitosan has been widely used in cartilage tissue engineering because of its similar structure to glycine aminoglycan, which is widely distributed in connective tissues. The molecular weight, as an important structural parameter of chitosan, affects not only the method of chitosan composite scaffold preparation but also the effect on cartilage tissue healing. Thus, this review identifies methods for the preparation of chitosan composite scaffolds with low, medium and high molecular weights, as well as a range of chitosan molecular weights appropriate for cartilage tissue repair, by summarizing the application of different molecular weights of chitosan in cartilage repair in recent years.

Enhancing chemical and physical stability of pharmaceuticals using freeze-thaw method: challenges and opportunities for process optimization through quality by design approach

The freeze-thaw (F/T) method is commonly employed during the processing and handling of drug substances to enhance their chemical and physical stability and obtain pharmaceutical applications such as hydrogels, emulsions, and nanosystems (e.g., supramolecular complexes of cyclodextrins and liposomes). Using F/T in manufacturing hydrogels successfully prevents the need for toxic cross-linking agents; moreover, their use promotes a concentrated product and better stability in emulsions. However, the use of F/T in these applications is limited by their characteristics (e.g., porosity, flexibility, swelling capacity, drug loading, and drug release capacity), which depend on the optimization of process conditions and the kind and ratio of polymers, temperature, time, and the number of cycles that involve high physical stress that could change properties associated to quality attributes. Therefore, is necessary the optimization of F/T conditions and variables. The current research regarding F/T is focused on enhancing the formulations, the process, and the use of this method in pharmaceutical, clinical, and biological areas. The present review aims to discuss different studies related to the impact and effects of the F/T process on the physical, mechanical, and chemical properties (porosity, swelling capacity) of diverse pharmaceutical applications with an emphasis on their formulation properties, the method and variables used, as well as challenges and opportunities in developing. Finally, we review the experimental approach for choosing the standard variables studied in the F/T method applying the systematic methodology of quality by design.

3D printing of 'green' thermo-sensitive chitosan-hydroxyapatite bone scaffold based on lyophilized platelet-rich fibrin

The critical bone defect is still an urgent problem in the field of bone repair. Here, we reported a new type of chitosan (CS)-hydroxyapatite (HAP) scaffolds based on lyophilized platelet-rich fibrin (L-PRF) for releasing abundant growth factors to realize their respective functions. It also has strong mechanical properties to maintain the stability of the bone repair environment. However, acid-soluble CS hydrogels often contain toxic and organic solvents. Moreover, chemical agents may be used for cross-linking for better mechanical properties, further increasing cytotoxicity. In this study, we used an alkali/urea dissolution system to dissolve CS, which improved its mechanical properties and made it thermo-sensitive. Finally, the L-PRF-CS-HAP (P-C-H) composite scaffold was constructed by extrusion-based printing. The results showed that the printing ink had desirable printability and temperature sensitivity. The compressive properties of the scaffolds exhibited a trend of decline with L-PRF content increasing, but all of them could meet the strength of cancellous bone. Meanwhile, the scaffolds had high hydrophilicity, porosity, and could be degraded stablyin vitro. The antibacterial properties of the scaffolds were also verified, greatly reducing the risk of infection during bone repair. It was also demonstrated that the release time of growth factor from L-PRF was significantly prolonged, and growth factor could still be detected after 35 d of sustained release. The capacity of cells to proliferate increased as the number of L-PRF components increased, indicating that L-PRF still exhibited biological activity after 3D printing.

An injectable supramolecular nanofiber-reinforced chitosan hydrogel with antibacterial and anti-inflammatory properties as potential carriers for drug delivery

The inherent weak mechanical strength of chitosan physical cross-linking hydrogels (CS hydrogels) limits their applications in biomaterials. Hence, puerarin (PUE) as a self-assembly active small molecule in herbal was introduced in CS hydrogels to fabricate CS/PUE₁₈ composite hydrogels with interpenetrating network structure. The result of rheological measurement showed that storage modulus and loss modulus of CS/PUE₁₈ composite hydrogels were improved by three orders of magnitude, indicating that the introduction of PUE significantly reinforced CS hydrogels. The results of SEM and BET measurement demonstrated that macromolecular chains of CS intertwined with nanofibers of PUE, which caused the network structure of CS/PUE₁₈ composite hydrogels to become denser. XRD patterns and FT-IR spectra verified that the amino groups in CS formed hydrogen bonding with the hydroxyl groups in PUE. Degradation and swelling experiments showed that CS/PUE₁₈ composite hydrogels have pH sensitivity. Moreover, CS/PUE₁₈ composite hydrogels exhibited multi-functionality including injectability, thixotropy, cytocompatibility, antibacterial and anti-inflammatory properties. The release behavior of berberine chloride hydrate (BCH) and PUE from the resultant CS/PUE₁₈ composite hydrogels have pH dependence. These results revealed that injectable CS/PUE₁₈ composite hydrogels with dual antibacterial and anti-inflammatory properties could be potential delivery vehicles for sustained and controlled release.

Tunable Thermo-Responsive Properties of Hydroxybutyl Chitosan Oligosaccharide

In this study, a simple method was used to synthesize novel thermosensitive hydroxybutyl chitosan oligosaccharide (HBCOS) by introducing hydroxybutyl groups to C₆–OH of chitosan oligosaccharide (COS) chain. The variation in light scattering demonstrated that HBCOS had good thermosensitive properties and the particle size of HBCOS changed from 2.21–3.58 to 281.23–4,162.40 nm as the temperature increased to a critical temperature (LCST). The LCST of HBCOS (10 mg/ml) decreased from 56.25°C to 40.2°C as the degrees of substitution (DSs) increased from 2.96 to 4.66. The LCST of HBCOS with a DS of 4.66 decreased to 33.5°C and 30°C as the HBCOS and NaCl concentrations increased to 50 mg/ml and 4% (w/v), respectively. Variable-temperature FTIR spectroscopy confirmed that dehydration of hydrophobic chains and the transition of hydrogen bonds were the driving forces for the phase transition of HBCOS. Moreover, HBCOS was not cytotoxic at different concentrations. This work generated a novel thermosensitive HBCOS with tunable thermoresponsive properties and excellent biocompatibility, which may be a potential nanocarrier for the biomedical application.

Homogeneous deacetylation and degradation of chitin in NaOH/urea dissolution system

Since being discovered, alkali/urea has been widely used in the dissolution of natural polysaccharides and the preparation of functional materials such as hydrogels, fibers, films and nanoparticles. This work will focus on verifying the structural stability, homogeneous degradation and deacetylation of chitin in alkali-soluble systems. The chitin was dissolved in NaOH/urea solution and stored at different temperature. At the specific time, the structure, viscosity, acetylation degree (DA) and biocompatibility of chitin and prepared chitosan were determined. The results indicated that dissolution process did not affect the structure and bioactivity of chitin. However, with the increase of storage time and temperature, chitin undergone significant homogeneous deacetylation (DA from 99.5% to 33.2%) and degradation (viscosity from 9284 cP to 1538 cP), accompanying by changes in crystalline structure and thermal stability. Moreover, the processed chitins were no-toxic for the biomedicine applications. This work will provide new ideas for the application of alkali-soluble systems.

Inverse solubility of chitin/chitosan in aqueous alkali solvents at low temperature

The low-temperature dissolving mechanism of chitin/chitosan in the alkali (LiOH, NaOH and KOH) aqueous solvents has not been well established yet. As revealed by our XRD and NMR methods, the prepared deacetylated chitins can be categorized as chitin (DA = 0.94-0.74), chitosan I (DA = 0.53-0.25) and chitosan II (DA < 0.25). Aqueous alkali exhibits fully different dissolving power in the above three regions, i.e., KOH > NaOH >> LiOH for chitin, KOH ≈ LiOH ≈ NaOH for chitosan I, and inverse LiOH >> KOH > NaOH for chitosan II. While in the two-alkali mixed solvent, NaOH or KOH can destroy the interaction of LiOH with D9 (chitosan II region) in the order of NaOH >> KOH, but LiOH cannot destroy the interaction of KOH with raw chitin. The varied solubility of chitin/chitosan in alkali solvent is suggested to be from the cation's preferential interaction rather than OH^- ion and low temperature.

In situ photocrosslinked hyaluronic acid and poly (γ-glutamic acid) hydrogels as injectable drug carriers for load-bearing tissue application

Due to the syringeability of precursor solution and convenience of open surgical treatment, injectable hydrogels have gained growing attention in drug delivery application. For load-bearing tissue, the excellent mechanical property is an important requirement for delivery vehicles to resist external stress and loads. Herein, we prepared mechanically robust injectable hydrogels (HA/γ-PGA hydrogels for short) using methacrylate-functionalized hyaluronic acid and poly (γ-glutamic acid) via photopolymerization. The HA/γ-PGA hydrogels showed outstanding anti-compression ability and could suffer a more than 80% strain. Meanwhile, after 5 cycles of compression, HA/γ-PGA hydrogels could still recover quickly against external stress, showing excellent shape recovery capability. Moreover, the mechanical properties could be modulated easily by changing the molar ratio of HA to γ-PGA. The drug release behavior was also evaluated and the drug-loaded HA/γ-PGA hydrogels showed a weak burst release and sustained release behavior. Additionally, HA/γ-PGA hydrogels also exhibited superior biocompatibility. Therefore, HA/γ-PGA hydrogels have great potential as injectable drug carriers for load-bearing tissue application.