Evaluation of different saccharides and chitin as eco-friendly additive to improve the magnetic cross-linked enzyme aggregates (CLEAs) activities

Green immobilization: Enhancing enzyme stability and reusability on eco-friendly support

In the current years of heightened focus on green chemistry and sustainable materials, this study delves into the untapped potential of hyaluronic acid (HA), chitin, and chitosan-prominent polysaccharides for groundbreaking applications. The primary aim is to effectively immobilize catalase enzymes onto matrices composed of chitosan, chitin, HA/chitin, and HA/chitosan. The rigorous investigation covers a spectrum of structural enhancements encompassing pH and temperature stability, thermal resilience, half-life extension, storage durability, reusability, and comprehensive FTIR analyses of the catalase immobilization. Notably, catalase activity demonstrated remarkable resilience on HA/chitin and HA/chitosan matrices, maintaining 73.80% and 79.55% efficacy even after 25 cycles. The introduction of covalent cross-linking between catalase and HA/chitin or HA/chitosan, facilitated by a cross-linking agent, significantly amplified stability and recycling efficiency. Consequently, the immobilized catalase showcases substantial promise across a spectrum of industrial applications, spanning from food and detergent production to bioremediation and diverse commercial processes. This underscores its pivotal role as a versatile and invaluable innovation in the realm of sustainable technologies.

Immobilizing white-rot fungi laccase: Toward bio-derived supports as a circular economy approach in organochlorine removal

Despite their high persistence in the environment, organochlorines (OC) are widely used in the pharmaceutical industry, in plastics, and in the manufacture of pesticides, among other applications. These compounds and the byproducts of their decomposition deserve attention and efficient proposals for their treatment. Among sustainable alternatives, the use of ligninolytic enzymes (LEs) from fungi stands out, as these molecules can catalyze the transformation of a wide range of pollutants. Among LEs, laccases (Lac) are known for their efficiency as biocatalysts in the conversion of organic pollutants. Their application in biotechnological processes is possible, but the enzymes are often unstable and difficult to recover after use, driving up costs. Immobilization of enzymes on a matrix (support or solid carrier) allows recovery and stabilization of this catalytic capacity. Agricultural residual biomass is a passive environmental asset. Although underestimated and still treated as an undesirable component, residual biomass can be used as a low-cost adsorbent and as a support for the immobilization of enzymes. In this review, the adsorption capacity and immobilization of fungal Lac on supports made from residual biomass, including compounds such as biochar, for the removal of OC compounds are analyzed and compared with the use of synthetic supports. A qualitative and quantitative comparison of the reported results was made. In this context, the use of peanut shells is highlighted in view of the increasing peanut production worldwide. The linkage of methods with circular economy approaches that can be applied in practice is discussed.

Recent applications and future prospects of magnetic biocatalysts

Magnetic biocatalysts combine magnetic properties with the catalytic activity of enzymes, achieving easy recovery and reuse in biotechnological processes. Lipases immobilized by magnetic nanoparticles dominate. This review covers an advanced bibliometric analysis and an overview of the area, elucidating research advances. Using WoS, 34,949 publications were analyzed and refined to 450. The prominent journals, countries, institutions, and authors that published the most were identified. The most cited articles showed research hotspots. The analysis of the themes and keywords identified five clusters and showed that the main field of research is associated with obtaining biofuels derived from different types of sustainable vegetable oils. The overview of magnetic biocatalysts showed that these materials are also employed in biosensors, photothermal therapy, environmental remediation, and medical applications. The industry shows a significant interest, with the number of patents increasing. Future studies should focus on immobilizing new lipases in unique materials with magnetic profiles, aiming to improve the efficiency for various biotechnological applications.

Exploring the synergistic effects of enzyme@lactoferrin hybrid on biomimetic immobilization: Unveiling the impact on catalytic efficiency

Metal-organic frameworks (MOFs) have gained attention as a hopeful material for enzyme immobilization due to their advantageous characteristics, for instance, high surface area and easy construction conditions. Nonetheless, the confinement effect and competing coordination often lead to partial or complete inactivation of the immobilized enzymes. In this study, we present a novel strategy, the lactoferrin-boosted one-pot embedding approach, which efficiently connects enzymes with lactoferrin (LF) hybrid Graphene Oxide (GO)//Pt Nanoparticles/MOF-74 (referred to as enzyme@LF@rGO/PtNP@MOF-74). This approach demonstrates a high embedding efficiency. By employing a hybrid of LF and GO/Pt Nanoparticles as synchronous ligands for Zn-MOF-74, we provide a suitable environment for enzyme immobilization, resulting in enhanced enzymatic activity. The lipase@LF@rGO/PtNP@MOF-74 exhibits improved stability and resistance to organic solvents and significantly enhanced in thermal stability of the lipase@LF@rGO/PtNP@MOF-74 comparing to the free enzyme. The lipase@LF@rGO/PtNP@MOF-74 displayed excellent long-term storage stability, which could protect more than 80 % of the initial activity for 8 weeks. Besides, the lipase@LF@rGO/PtNP@MOF-74 had high reusability, which showed a high degree of activity (more than 75 %) after 20 cycles. As a bio-macromolecule, lactoferrin possesses bio-affinity, creating a favorable microenvironment for enzymes and minimizing the impact of external factors on their conformation and activity during bio-macromolecule utilization.

Adsorption-precipitation-cross-linking immobilization of GDSL-type esterase from Aspergillus niger GZUF36 by polydopamine-modified magnetic clarity tetroxide nanocouplings and its enzymatic characterization

Recombinant INANE1 (rINANE1), a recombinant intracellular GDSL-type esterase from Aspergillus niger GZUF36, has high acetate substrate specificity. Here, rINANE1 was successfully immobilized on polydopamine (PDA)-modified magnetic ferric oxide nanoparticles (Fe₃O₄NPs) by adsorption-precipitation-cross-linking to obtain cross-linked enzyme aggregate (CLEA)-rINANE1-Fe₃O₄@PDA. Fe₃O₄, Fe₃O₄@PDA, and CLEA-rINANE1-Fe₃O₄@PDA were characterized by scanning electron microscopy, X-ray diffraction, vibrating-sample magnetometry, Fourier transform infrared (FTIR) spectroscopy, and zeta potential analysis. Upon immobilization, CLEA-rINANE1-Fe₃O₄@PDA, with a protein loading of 72.72 ± 1.01 mg/g, reached optimal activity recovery of 104.40 % ± 1.14 %. FTIR analysis showed that immobilization increased the relative content of β-folding in rINANE1 by 12.25 % and reduced irregular curl by 4.16 %, rendering the structure more orderly. Specifically, under an alkaline condition (pH 10), CLEA-rINANE1-Fe₃O₄@PDA performed over 100 % of initial activity. The optimum temperature increased by 5 °C, and over 55 % of the initial activity was observed after 12 h at 55 °C. CLEA-rINANE1-Fe₃O₄@PDA showed over 40 % of its relative activity, whereas free rINANE1 showed <10 % in acetonitrile. In addition, the relative activity of CLEA-rINANE1-Fe₃O₄@PDA was retained at about 80 % after eight cycles and maintained at 109 % after 45 days. The PDA-modified magnetic ferrite nanoparticles exhibited excellent stability and recyclability, providing a new avenue for developing industrial biocatalysts.

Solvent tolerant enzymes in extremophiles: Adaptations and applications

Non-aqueous enzymology has always drawn attention due to the wide range of unique possibilities in biocatalysis. In general, the enzymes do not or insignificantly catalyze substrate in the presence of solvents. This is due to the interfering interactions of the solvents between enzyme and water molecules at the interface. Therefore, information about solvent-stable enzymes is scarce. Yet, solvent-stable enzymes prove quite valuable in the present day biotechnology. The enzymatic hydrolysis of the substrates in solvents synthesizes commercially valuable products, such as peptides, esters, and other transesterification products. Extremophiles, the most valuable yet not extensively explored candidates, can be an excellent source to investigate this avenue. Due to inherent structural attributes, many extremozymes can catalyze and maintain stability in organic solvents. In the present review, we aim to consolidate information about the solvent-stable enzymes from various extremophilic microorganisms. Further, it would be interesting to learn about the mechanism adapted by these microorganisms to sustain solvent stress. Various approaches to protein engineering are used to enhance catalytic flexibility and stability and broaden biocatalysis's prospects under non-aqueous conditions. It also describes strategies to achieve optimal immobilization with minimum inhibition of the catalysis. The proposed review would significantly aid our understanding of non-aqueous enzymology.

Lipase immobilization via cross-linked enzyme aggregates: Problems and prospects - A review

In this review we have focused on the preparation of cross-linked enzyme aggregates (CLEAs) from lipases, as these are among the most used enzyme in bioprocesses. This immobilization method is considered very attractive due to preparation simplicity, non-use of supports and the possibility of using crude enzyme extracts. CLEAs provide lipase stabilization under extreme temperature or pH conditions or in the presence of organic solvents, in addition to preventing enzyme leaching in aqueous medium. However, it presents some problems in the preparation and limitations in their use. The problems in preparation refer mainly to the crosslinking step, and may be solved using an aminated feeder. The problems in handling have been tackled designing magnetic-CLEAs or trapping the CLEAs in particles with better mechanical properties, the substrate diffusion problems has been reduced by producing more porous-CLEAs, etc. The enzyme co-immobilization using combi-CLEAs is also a new tendency. Therefore, this review explores the CLEAs methodology aimed at lipase immobilization and its applications.

Cross-linked enzyme aggregates immobilization: preparation, characterization, and applications

Enzymes are commonly used as biocatalysts for various biological and chemical processes. However, some major drawbacks of free enzymes (e.g. poor reusability and instability) significantly restrict their industrial practices. How to overcome these weaknesses remain considerable challenges. Enzyme immobilization is one of the most effective ways to improve the reusability and stability of enzymes. Cross-linked enzyme aggregates (CLEAs) has been known as a novel and versatile carrier-free immobilization method. CLEAs is attractive due to its simplicity and robustness, without purification. It generally shows: high catalytic specificity and selectivity, good operational and storage stabilities, and good reusability. Moreover, co-immobilization of different kinds of enzymes can be acquired. These CLEAs advantages provide opportunities for further industrial applications. Herein, the preparation parameters of CLEAs were first summarized. Next, characterization of structural and catalytic properties, stability and reusability are also proposed. Finally, some important applications of this technique in: environmental protection, industrial chemistry, food industry, and pharmaceutical synthesis and delivery are introduced. Potential challenges and future research directions, such as improving cross-linking efficiency and internal mass transfer efficiency, are also presented. This implies that CLEAs provide an efficient and feasible technique to improve the properties of enzymes for use in the industry.

Current Status and Future Perspectives of Supports and Protocols for Enzyme Immobilization

The market for industrial enzymes has witnessed constant growth, which is currently around 7% a year, projected to reach $10.5 billion in 2024. Lipases are hydrolase enzymes naturally responsible for triglyceride hydrolysis. They are the most expansively used industrial biocatalysts, with wide application in a broad range of industries. However, these biocatalytic processes are usually limited by the low stability of the enzyme, the half-life time, and the processes required to solve these problems are complex and lack application feasibility at the industrial scale. Emerging technologies create new materials for enzyme carriers and sophisticate the well-known immobilization principles to produce more robust, eco-friendlier, and cheaper biocatalysts. Therefore, this review discusses the trending studies and industrial applications of the materials and protocols for lipase immobilization, analyzing their advantages and disadvantages. Finally, it summarizes the current challenges and potential alternatives for lipases at the industrial level.

Immobilization of α-amylase enzyme on a protein @metal-organic framework nanocomposite: A new strategy to develop the reusability and stability of the enzyme

Metal-organic structures (MOFs) have been designed for a wide range of applications due to their high porosity, large surface area, and flexibility. For the first time in this work, the successful immobilization of α-amylase is confirmed by the use of ZIF-8 as easy and good support. The morphology, functional groups, and chemical composition of the support and immobilized α-amylase were tested using different methods such as scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), and thermal gravimetric analysis (TGA). The enzymatic activities of the immobilized olibanum-bovine serum albumin@zeolitic imidazolate frameworks nanocomposite (OLB/BSA@ZIF-8)-α-amylase were compared with the free one. The pH and thermal stability of the OLB/BSA@ZIF-8-α-amylase were significantly enhanced compared to the free enzyme. The OLB/BSA@ZIF-8-α-amylase displayed excellent long-term storage stability, which could protect more than 90% of the initial activity for 8 weeks. Besides, the OLB/BSA@ZIF-8-α-amylase had high reusability, which showed a high degree of activity (more than 81%) after 20 cycles. This is the first study that uses OLB/BSA@ZIF-8 nanocomposite as immobilizing support for the immobilization of α-amylase. Improved catalytic efficiency (V_max/K_m) values, reusability, and storage stability of immobilized α-amylase can make it suitable in industrial and biotechnological applications.

Chitosan-based CLEAs from Aspergillus niger type A feruloyl esterase: high-productivity biocatalyst for alkyl ferulate synthesis

The enzymatic synthesis of alkyl ferulates is an important reaction in cosmetic and pharmaceutical chemistries, since it may allow to expand the biorefinery concept valorizing biomass wastes enriched in ferulic acid. However, robust biocatalysts for that purpose are scarce. Herein, we have immobilized the type A feruloyl esterase from Aspergillus niger (AnFaeA) as cross-linked enzyme aggregates, employing chitosan as co-feeder (ChCLEAs). High immobilization yields and relative activity recovery were attained in all assessed conditions (> 93%). Furthermore, we enhanced the thermal stability of the soluble enzyme 32-fold. AnFaeA-ChCLEAs were capable to quantitatively perform the solvent-free direct esterification of short- to medium-chain alkyl ferulates (C4-C12) in less than 24 h. By raising the operational temperature to 50 °C, AnFaeA-ChCLEAs transformed 350 mM ferulic acid into isopentyl ferulate with a space-time yield of 46.1 g of product × L^-1 × day^-1, 73-fold higher than previously reported. The overall sustainability of this alkyl ferulate production bioprocess is supported by the high total turnover number (TTN 7 × 10⁵) and the calculated green metrics (E factor = 30). Therefore, we herein present a robust, efficient, and versatile heterogeneous biocatalyst useful for the synthesis of a wide diversity of alkyl ferulates. KEY POINTS: • CLEAs of feruloyl esterase A from A. niger using chitosan as co-feeder were obtained. • Microenvironment of the biocatalysts allowed to obtain C1 to C18 alkyl ferulates. • Biocatalyst at boundary conditions showed a high productivity of 46 g/L day. Graphical Abstract.

Stabilization of ω-transaminase from Pseudomonas fluorescens by immobilization techniques

Transaminases are a class of enzymes with promising applications for the preparation and resolution of a vast diversity of valued amines. Their poor operational stability has fueled many investigations on its stabilization due to their biotechnological relevance. In this work, we screened the stabilization of the tetrameric ω-transaminase from Pseudomonas fluorescens (PfωTA) through both carrier-bound and carrier-free immobilization techniques. The best heterogeneous biocatalyst was the PfωTA immobilized as cross-linked enzyme aggregates (PfωTA-CLEA) which resulted after studying different parameters as the precipitant, additives and glutaraldehyde concentrations. The best conditions for maximum recovered activity (29 %) and maximum thermostability at 60 ºC and 70 ºC (100 % and 71 % residual activity after 1 h, respectively) were achieved by enzyme precipitation with 90% acetone or ethanol, in presence of BSA (100 mg/mL) and employing glutaraldehyde (100 mM) as cross-linker. Studies on different conditions for PfωTA-CLEA preparation yielded a biocatalyst that exhibited 31 and 4.6 times enhanced thermal stability at 60 °C and 70 °C, respectively, compared to its soluble counterpart. The PfωTA-CLEA was successfully used in the bioamination of 4-hydroxybenzaldehyde to 4-hydroxybenzylamine. To the best of our knowledge, this is the first report describing a transaminase cross-linked enzyme aggregates as immobilization strategy to generate a biocatalyst with outstanding thermostability.

Design for preparation of more active cross-linked enzyme aggregates of Burkholderia cepacia lipase using palm fiber residue

A new design of cross-linked enzyme aggregates (CLEAs) of Burkholderia cepacia lipase (BCL) based mainly on the use of lignocellulosic residue of palm fiber as an additive was proposed. Different parameters for the preparation of active CLEAs in the hydrolysis of olive oil, such as precipitation agents, crosslinking agent concentration, additives, and coating agents were investigated. The highest activity yield (121.1 ± 0.1%) and volumetric activity (1578.1 ± 2.5 U/mL) were achieved for CLEAs prepared using the combination of a coating step with Triton^® X-100 and polyethyleneimine plus the use of palm fiber as an additive. The variations of the secondary structures of BCL-CLEAs were analyzed by second-derivative infrared spectra, mainly indicating a reduction of the α-helix structure, which was responsible for the lipase activation in the supramolecular structure of the CLEAs. Thus, these results provided evidence of an innovative design of BCL-CLEAs as a sustainable and biocompatible opportunity for biotechnology applications.

Microbial Proteases Applications

The use of chemicals around the globe in different industries has increased tremendously, affecting the health of people. The modern world intends to replace these noxious chemicals with environmental friendly products for the betterment of life on the planet. Establishing enzymatic processes in spite of chemical processes has been a prime objective of scientists. Various enzymes, specifically microbial proteases, are the most essentially used in different corporate sectors, such as textile, detergent, leather, feed, waste, and others. Proteases with respect to physiological and commercial roles hold a pivotal position. As they are performing synthetic and degradative functions, proteases are found ubiquitously, such as in plants, animals, and microbes. Among different producers of proteases, Bacillus sp. are mostly commercially exploited microbes for proteases. Proteases are successfully considered as an alternative to chemicals and an eco-friendly indicator for nature or the surroundings. The evolutionary relationship among acidic, neutral, and alkaline proteases has been analyzed based on their protein sequences, but there remains a lack of information that regulates the diversity in their specificity. Researchers are looking for microbial proteases as they can tolerate harsh conditions, ways to prevent autoproteolytic activity, stability in optimum pH, and substrate specificity. The current review focuses on the comparison among different proteases and the current problems faced during production and application at the industrial level. Deciphering these issues would enable us to promote microbial proteases economically and commercially around the world.

CALB Immobilized onto Magnetic Nanoparticles for Efficient Kinetic Resolution of Racemic Secondary Alcohols: Long-Term Stability and Reusability

In this study, an immobilization strategy for magnetic cross-linking enzyme aggregates of lipase B from Candida antarctica (CALB) was developed and investigated. Magnetic particles were prepared by conventional co-precipitation. The magnetic nanoparticles were modified with 3-aminopropyltriethoxysilane (APTES) to obtain surface amino-functionalized magnetic nanoparticles (APTES⁻Fe₃O₄) as immobilization materials. Glutaraldehyde was used as a crosslinker to covalently bind CALB to APTES⁻Fe₃O₄. The optimal conditions of immobilization of lipase and resolution of racemic 1-phenylethanol were investigated. Under optimal conditions, esters could be obtained with conversion of 50%, enantiomeric excess of product (ee_p) > 99%, enantiomeric excess of substrate (ee_s) > 99%, and enantiomeric ratio (E) > 1000. The magnetic CALB CLEAs were successfully used for enzymatic kinetic resolution of fifteen secondary alcohols. Compared with Novozym 435, the magnetic CALB CLEAs exhibited a better enantioselectivity for most substrates. The conversion was still greater than 49% after the magnetic CALB CLEAs had been reused 10 times in a 48 h reaction cycle; both ee_s and ee_p were close to 99%. Furthermore, there was little decrease in catalytic activity and enantioselectivity after being stored at -20 °C for 90 days.

Combined Cross-Linked Enzyme Aggregates as Biocatalysts

Enzymes are efficient biocatalysts providing an important tool in many industrial biocatalytic processes. Currently, the immobilized enzymes prepared by the cross-linked enzyme aggregates (CLEAs) have drawn much attention due to their simple preparation and high catalytic efficiency. Combined cross-linked enzyme aggregates (combi-CLEAs) including multiple enzymes have significant advantages for practical applications. In this review, the conditions or factors for the preparation of combi-CLEAs such as the proportion of enzymes, the type of cross-linker, and coupling temperature were discussed based on the reaction mechanism. The recent applications of combi-CLEAs were also reviewed.