Role of EDTA on the Pd(II) adsorption characteristics of chitosan cross-linked 3-amino-1,2,4-triazole-5-thiol derivative from synthetic electroless plating solutions

Adsorption of metal porphyrins using chitosan/zeolite-X composite as an efficient demetallization agent for crude oil: Isotherm, kinetic, and thermodynamic studies

Chitosan/zeolite-X (CHS/ZX) was synthesized to serve as an effective adsorbent for metal porphyrins through adsorption processes as an alternative to traditional separation methods from crude oil. The adsorption-desorption mechanisms of vanadyl and nickel tetraphenyl porphyrin (VO-TPP and Ni-TPP) were conducted on the model solution. Compared to individual components CHS and ZX, the CHS/ZX composite exhibited a doubled capacity for metal porphyrin removal. The synthesized composite was systematically characterized using FESEM, BET, XRD, FTIR, TGA, XPS, and CHN analyses. The study investigated the impact of many factors, including temperature, initial metal-porphyrin concentration, CHS/ZX dose, and contact time, on the adsorption efficiency of metal-porphyrin using CHS/ZX adsorbents. The adsorption processes of VO-TPP and Ni-TPP on CHS/ZX were effectively assessed through various equilibrium models, such as Langmuir, Freundlich, and Dubinin-Radushkevich (D-R). The pseudo-second-order model accurately depicted the adsorption processes of both VO-TPP and Ni-TPP. Determining the point of zero charge (pHPZC) highlighted the composite's surface charge distribution. Furthermore, considering the ΔG° and ΔH° values, the adsorption processes at different temperatures are exothermic, and VO-TPP exhibits a greater adsorption capacity than Ni-TPP under similar conditions. Notably, 73.7 % of VO-TPP and 83.8 % of Ni-TPP that were adsorbed were successfully recovered.

Sustainable Zn2+ removal using highly efficient, novel, and cost-effective chitosan-magnetic biochar composite

This study focused on the development of a sustainable and low-cost adsorbent derived from the chitosan-biochar composite for the removal of Zn2+ from an aqueous solution. Biochar was prepared from cotton stalk residue by pyrolysis at 600 °C for 2 h, modified with FeCl3, and composed with chitosan in various ratios (1:3, 1:1, 3:1), leading to the formation of an efficient, thermally stable, and rich with functional groups chitosan-biochar composite denoted as CHB-Fe-CS. Functional groups (hydroxyl, carboxyl, and amine) were identified as key contributors to the adsorption mechanism. Langmuir isotherm (R2 = 0.99) and Pseudo-Second order (R2 = 0.99) were best fitted models with the experimental results indicating chemisorption-driven monolayer adsorption. The results revealed CHB-Fe-CS (3:1) composite obtained the highest adsorption capacity of 117.50 mg/g for Zn2+ under optimal conditions viz., 180 min batch time, 500 mg/l metal concentration, 4 g/l adsorbent dosage, 40 °C solution temperature, and 5.0 pH. Regeneration of the used adsorbent was performed using 0.2 mol/l HCl and obtained desorption efficiency of 67.48% and 51.48% after the 4th and 8th cycles. The adsorption mechanisms were dominated by ion exchange, surface complexation, and electrostatic attraction compared to intra-particle diffusion and physisorption. The CHB-Fe-CS demonstrated an economical, environment friendly, and good performing adsorbent for water decontamination.

Synthesized carboxymethyl-chitosan variant composites for cyclic adsorption-desorption based removal of Fe, Pb, and Cu

The global issue of environmental contamination from industrial wastewater comprising Cu, Fe and Pb demands effective treatment strategies. In this article, a functional composite sorbent was devised to selectively remove copper, iron, and lead from a real-world mimicking wastewater system. For the purpose, high, medium, and low molecular weight chitosan with amine and hydroxyl functional groups were used as a substrate, and glutaraldehyde was used to anchor the organic compound with carboxymethyl groups. Characterization with X-ray diffraction, Fourier transform infrared spectroscopy, thermogravimetric analysis, X-ray analyzer accompanied by field emission scanning electron microscope, and Brunauer-Emmett-Teller were conducted for the synthesized adsorbent. Accordingly, the properties of the adsorbent were evaluated to infer that the synthesis assured a purified and functionalized system. The surface area of the medium carboxymethyl chitosan derivative was analyzed as 31.43 m2 g-1. Various adsorption parameters were examined methodically to assess upon optimal removal requirements. The effect of adsorbent dosage, contact time and concentration on the adsorption of the studied metal ions were conducted and the optimum values were achieved at pH 3.82, 540 min contact duration and 1.2 g L-1 sorbent dose. Maximum adsorbent capacities of 344.83 mg g-1, 9.59 mg g-1, and 90.09 mg g-1 were realized for Cu, Pb, and Fe, respectively. The experimental measurements of the studied heavy metal ions inferred the best fitness of Langmuir isotherm equilibrium and pseudo second order kinetic models. Further, elution studies with easy-to-deploy low-cost acidic and basic eluents (HCl, HNO3, H2SO4, KOH, and NaOH) were conducted with cyclic adsorption-desorption strategies. These investigations confirmed the adsorbent's good reusability up to 3 cycles of adsorption and its proximity to serve as a potential material for multi-heavy metal ions elimination from complex adsorbate systems.

Cyclic desorption based efficacy of polyvinyl alcohol-chitosan variant resins for multi heavy-metal removal

The simultaneous removal of Cu, Pb and Fe from water bodies has been targeted in this work with polyvinyl alcohol (PVA) and chitosan (low, medium, and high molecular weight) derivative and with cyclic desorption efficacy target. For a varied range of adsorbent loading (0.2-2 g L^-1), initial concentration (187.7-563.1 mg L^-1 for Cu, 5.2-15.6 mg L^-1 for Pb, and 61.85-185.55 mg L^-1 for Fe), and resin contact time (5 to 720 min), batch adsorption-desorption studies were conducted. After first adsorption-desorption cycle, the optimum absorption capacity was 6.85 mg g^-1 for Pb, 243.90 mg g^-1 for Cu, and 87.72 mg g^-1 for Fe for the high molecular weight chitosan grafted polyvinyl alcohol resin (HCSPVA). The alternate kinetic and equilibrium models were analyzed along with the interaction mechanism between metal ions and functional groups. The cyclic desorption studies were carried out with simple eluent systems such as HCl, HNO₃, H₂SO₄, KOH, and NaOH. The experiments revealed that the HCSPVA derivative has been an impressive, reusable, and effective sorbent for the mitigation of Pb, Fe, and Cu in complex wastewater systems. This is due to its easy synthesis, excellent adsorption capacity, quick sorption rate, and remarkable regeneration capabilities.

Thiomers of Chitosan and Cellulose: Effective Biosorbents for Detection, Removal and Recovery of Metal Ions from Aqueous Medium

Removal of toxic metal ions using adsorbents is a well-known strategy for water treatment. While chitosan and cellulose can adsorb weakly some types of metals, incorporating thiols as metal chelating agents can improve their sorption behaviors significantly. Presented in this review are the various chemical modification strategies applicable for thiolation of chitosan and cellulose in the forms of mercaptans, xanthates and dithiocarbamates. Moreover, much attention has been paid to the specific strategies for controlling the thiolation degree and characterization approaches for establishing the structure-property relationship. Also, the kinetics and isotherm models that elucidate the adsorption processes and mechanisms induced by the thiomers have been explained. These thiomers have found great potentials in the applications associated with metal removal, metal recovery and metal detection.

Thiolated-Polymer-Based Nanoparticles as an Avant-Garde Approach for Anticancer Therapies-Reviewing Thiomers from Chitosan and Hyaluronic Acid

Thiomers (or thiolated polymers) have broken through as avant-garde approaches in anticancer therapy. Their distinguished reactivity and properties, closely linked to their final applications, justify the extensive research conducted on their preparation and use as smart drug-delivery systems (DDSs). Multiple studies have demonstrated that thiomer-rich nanoformulations can overcome major drawbacks found when administering diverse active pharmaceutical ingredients (APIs), especially in cancer therapy. This work focuses on providing a complete and concise review of the synthetic tools available to thiolate cationic and anionic polymers, in particular chitosan (CTS) and hyaluronic acid (HA), respectively, drawing attention to the most successful procedures. Their chemical reactivity and most relevant properties regarding their use in anticancer formulations are also discussed. In addition, a variety of NP formation procedures are outlined, as well as their use in cancer therapy, particularly for taxanes and siRNA. It is expected that the current work could clarify the main synthetic strategies available, with their scope and drawbacks, as well as provide some insight into thiomer chemistry. Therefore, this review can inspire new research strategies in the development of efficient formulations for the treatment of cancer.

Recovery and reduction of Au(III) from mixed metal solution by thiourea-resorcinol-formaldehyde microspheres

To develop a novel adsorbent that can efficiently and rapidly recover gold from the leaching solution of electronic appliances, thiourea-resorcinol-formaldehyde resin microspheres (TRF) were prepared by a one-pot solvothermal method. Fourier transform infrared (FT-IR), thermogravimetric (TGA), X-ray diffraction (XRD), Transmission Electron Microscope (TEM), X-ray photoelectron spectroscopy (XPS), scanning electron micrograph and energy dispersive X-ray spectroscopy (SEM and SEM-EDS) were used to analyze the morphology and physical properties of TRF microspheres. The first time, TRF was successfully used to capture gold ions. The results showed that it had very high absorption capacity (1432 mg·g^-1), good selectivity (Au(III) ≫ Fe³⁺ > Ni²⁺ > Co²⁺ ≈ Cu²⁺ > Al³⁺ > Na⁺ ≈ K⁺) and excellent reuse performance for gold ions. Based on the study of adsorption isotherms and kinetics, Au(III) adsorption on TRF is mainly chemisorption and the adsorption sites are uniform. In acidic systems, Au(III) was reduced by TRF and deposited on TRF as elemental gold. This work provides the possibility to further develop the application of sulfur- and nitrogen-containing polymer materials in gold recovery from mixed metal solution.

Thiolated Chitosans: A Multi-talented Class of Polymers for Various Applications

Various properties of chitosan can be customized by thiolation for very specific needs in a wide range of application areas. Since the discovery of thiolated chitosans, many studies have proven their advantageous characteristics, such as adhesion to biological surfaces, adjustable cross-linking and swelling behavior, controllable drug release, permeation as well as cellular uptake enhancement, inhibition of efflux pumps and enzymes, complexation of metal ions, antioxidative properties, and radical scavenging activity. Simultaneously, these polymers remain biodegradable without increased toxicity. Within this Review, an overview about the different possibilities to covalently attach sulfhydryl ligands to the polymeric backbone of chitosan is given, and the resulting versatile physiochemical properties are discussed in detail. Furthermore, the broad spectrum of applications for thiolated chitosans in science and industry, ranging from their most advanced use in pharmaceutical and medical science over wastewater treatment to the impregnation of textiles, is addressed.

3D-MID Technology for Surface Modification of Polymer-Based Composites: A Comprehensive Review

The three-dimensional molded interconnected device (3D-MID) has received considerable attention because of the growing demand for greater functionality and miniaturization of electronic parts. Polymer based composite are the primary choice to be used as substrate. These materials enable flexibility in production from macro to micro-MID products, high fracture toughness when subjected to mechanical loading, and they are lightweight. This survey proposes a detailed review of different types of 3D-MID modules, also presents the requirement criteria for manufacture a polymer substrate and the main surface modification techniques used to enhance the polymer substrate. The findings presented here allow to fundamentally understand the concept of 3D-MID, which can be used to manufacture a novel polymer composite substrate.