Production of bacterial nanocellulose (BNC) and its application as a solid support in transition metal catalysed cross-coupling reactions

Green synthesis of nanocellulose supported cu-bionanocomposites and their profound applicability in the synthesis of amide derivatives and controlling of food-borne pathogens

Copper bionanocomposites (CBNCS) were synthesized using Ipomoea carnea- sourced nanocellulose as support via an eco-friendly and cost-effective method. X-ray Diffractometer (XRD) pattern of CBNCS confirmed the octahedral structure of Cu2O, the face-centered cubic (FCC) crystal structure of Cu(0). XRD also revealed the crystal lattice of cellulose II. Surface Electron Microscope (SEM) and Transmission Electron Microscope (TEM) revealed the uniform distribution of copper nanoparticles (Cu NPs) with an average size of 10 nm due to the presence of nanocellulose. X-ray photoelectron spectroscopy (XPS) provided information about the electronic, chemical state and elemental composition of CBNCS. Thermogravimetric Analysis (TGA) showed the thermal stability of CBNCS. CBNCS catalyzed the rearrangement of oximes to primary amides in a very mild condition with a high yield of up to 92 %. CBNCS effectively inhibited the growth of Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli) with lower minimum inhibitory concentration MIC values. Antioxidant activity and electrical conductivity of CBNCS were also determined.

Nanocellulose-stabilized nanocomposites for effective Hg(II) removal and detection: a comprehensive review

Mercury pollution, with India ranked as the world's second-largest emitter, poses a critical environmental and public health challenge and underscores the need for rigorous research and effective mitigation strategies. Nanocellulose is derived from cellulose, the most abundant natural polymer on earth, and stands out as an excellent choice for mercury ion remediation due to its remarkable adsorption capacity, which is attributed to its high specific surface area and abundant functional groups, enabling efficient Hg(II) ion removal from contaminated water sources. This review paper investigates the compelling potential of nanocellulose as a scavenging tool for Hg(II) ion contamination. The comprehensive examination encompasses the fundamental attributes of nanocellulose, its diverse fabrication techniques, and the innovative development methods of nanocellulose-based nanocomposites. The paper further delves into the mechanisms that underlie Hg removal using nanocellulose, as well as the integration of nanocellulose in Hg detection methodologies, and also acknowledges the substantial challenges that lie ahead. This review aims to pave the way for sustainable solutions in mitigating Hg contamination using nanocellulose-based nanocomposites to address the global context of this environmental concern.

Two-Step Upcycling Process of Lignocellulose into Edible Bacterial Nanocellulose with Black Raspberry Extract as an Active Ingredient

(1) Background: Bacterial nanocellulose (BNC) has gained in popularity over the years due to its outstanding properties such as renewability, biocompatibility, and bioavailability, and its use as an eco-friendly material of the future for replacing petrochemical products. (2) Methods: This research refers to the utilization of lignocellulose coming from wood waste via enzymatic hydrolysis to produce biopolymer BNC with an accumulation rate of 0.09 mg/mL/day. Besides its significant contribution to the sustainability, circularity, and valorization of biomass products, the obtained BNC was functionalized through the adsorption of black raspberry extract (BR) by simple soaking. (3) Results: BR contained 77.25 ± 0.23 mg GAE/g of total phenolics and 27.42 ± 0.32 mg CGE/g of total anthocyanins. The antioxidant and antimicrobial activity of BR was evaluated by DPPH (60.51 ± 0.18 µg/mL) and FRAP (1.66 ± 0.03 mmol Fe2+/g) and using a standard disc diffusion assay, respectively. The successful synthesis and interactions between BNC and BR were confirmed by FTIR analysis, while the morphology of the new nutrient-enriched material was investigated by SEM analysis. Moreover, the in vitro release kinetics of a main active compound (cyanidin-3-O-rutinoside) was tested in different release media. (4) Conclusions: The upcycling process of lignocellulose into enriched BNC has been demonstrated. All findings emphasize the potential of BNC-BR as a sustainable food industry material.

Study of PLA pre-treatment, enzymatic and model-compost degradation, and valorization of degradation products to bacterial nanocellulose

It is well acknowledged that microplastics are a major environmental problem and that the use of plastics, both petro- and bio- based, should be reduced. Nevertheless, it is also a necessity to reduce the amount of the already spread plastics. These cannot be easily degraded in the nature and accumulate in the food supply chain with major danger for animals and human life. It has been shown in the literature that advanced oxidation processes (AOPs) modify the surface of polylactic acid (PLA) materials in a way that bacteria more efficiently dock on their surface and eventually degrade them. In the present work we investigated the influence of different AOPs (ultrasounds, ultraviolet irradiation, and their combination) on the biodegradability of PLA films treated for different times between 1 and 6 h. The pre-treated samples have been degraded using a home model compost as well as a cocktail of commercial enzymes at mesophilic temperatures (37 °C and 42 °C, respectively). Degradation degree has been measured and degradation products have been identified. Excellent degradation of PLA films has been achieved with enzyme cocktail containing commercial alkaline proteases and lipases of up to 90% weight loss. For the first time, we also report valorization of PLA into bacterial nanocellulose after enzymatic hydrolysis of the samples.

Bacterial nanocellulose as green support of platinum nanoparticles for effective methanol oxidation

Bacterial nanocellulose, BNC, has emerged as a new class of nanomaterials recognized as renewable, biodegradable, biocompatible and material for versatile applications. BNC also proved as a perfect support matrix for metallic nanoparticle synthesis and appeared as suitable alternative for widely used carbon based materials. Following the idea to replace commonly used carbon based materials for platinum supports with the green and sustainable one, BNC appeared as an excellent candidate. Herein, microwave assisted synthesis has been reported for the first time for platinum nanoparticles supported on BNC as green material. Bacterial nanocelullose-platinum catalyst, Pt/BNC, was investigated by Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), atomic force microscopy (AFM), X-ray diffractometry (XRD) and transmission-electron microscopy (TEM) analysis. The obtained results confirmed successful synthesis of new Pt-based catalyst. It was found that Pt/BNC catalyst has high electrocatalytic performance in methanol oxidation reaction. Green/sustainable catalytic system is highly desirable and provided by the elegant microwave assisted synthesis of Pt/BNC will pave the way for a larger scale application and expedite the market penetration of such fuel cells.

Transfer hydrogenation of nitroarenes using cellulose filter paper-supported Pd/C by filtration as well as sealed methods

A reductive filter paper for selective nitro reduction has been prepared by modification of a pristine cellulose filter paper by Pd/C nanoparticles, as a portable catalyst. The reaction was performed in two different set-ups including (i) filtration and (ii) sealed systems, in the presence of ammonium formate and ex situ generated hydrogen gas reducing agents, respectively. In the sealed system in the presence of H₂ gas, the halogenated nitroarenes were completely reduced, while in the filtration system, different derivatives of the nitroarenes were selectively reduced to aryl amines. In both systems, the reduction of nitroarenes to aryl amines was performed with high efficiency and selectivity, comparable to a heterogeneous system. Reaction parameters were comprehensively designed using Design Expert software and then studied. The properties of the catalytic filter paper were studied in detail from the points of view of swellability, shrinkage, reusability, and stability against acidic, alkaline, and oxidative reagents.

A novel and efficient catalytic filtration has been developed for the selective reduction of nitro compounds on a Pd/C-doped cellulose filter paper.

Plant-Based Structures as an Opportunity to Engineer Optical Functions in Next-Generation Light Management

This review addresses the reconstruction of structural plant components (cellulose, lignin, and hemicelluloses) into materials displaying advanced optical properties. The strategies to isolate the main building blocks are discussed, and the effects of fibrillation, fibril alignment, densification, self-assembly, surface-patterning, and compositing are presented considering their role in engineering optical performance. Then, key elements that enable lignocellulosic to be translated into materials that present optical functionality, such as transparency, haze, reflectance, UV-blocking, luminescence, and structural colors, are described. Mapping the optical landscape that is accessible from lignocellulosics is shown as an essential step toward their utilization in smart devices. Advanced materials built from sustainable resources, including those obtained from industrial or agricultural side streams, demonstrate enormous promise in optoelectronics due to their potentially lower cost, while meeting or even exceeding current demands in performance. The requirements are summarized for the production and application of plant-based optically functional materials in different smart material applications and the review is concluded with a perspective about this active field of knowledge.

Bacterial Nanocellulose as a Scaffold for In Vitro Cell Migration Assay

Bacterial nanocellulose (BNC) stands out among polymers as a promising biomaterial due to its mechanical strength, hydrophilicity, biocompatibility, biodegradability, low toxicity and renewability. The use of scaffolds based on BNC for 3D cell culture has been previously demonstrated. The study exploited excellent properties of the BNC to develop an efficient and low-cost in vitro cell migration assay. The BNC scaffold was introduced into a cell culture 24 h after the SW480 cells were seeded, and cells were allowed to enter the scaffold within the next 24–48 h. The cells were stained with different fluorophores either before or after the introduction of the scaffold in the culture. Untreated cells were observed to enter the BNC scaffold in significant numbers, form clusters and retain a high viability after 48 h. To validate the assay’s usability for drug development, the treatments of SW480 cells were performed using aspirin, an agent known to reduce the migratory potential of this cell line in culture. This study demonstrates the application of BNC as a scaffold for cell migration testing as a low-cost alternative to commercial assays based on the Boyden chamber principle. The assay could be further developed for routine use in cancer research and anticancer drug development.

Engineered nanocellulose-based hydrogels for smart drug delivery applications

Nanocellulose is a promising "green" nanomaterial that has recently gained scientific interest because of its excellent characteristics, such as less risks of toxicity, biocompatibility, biodegradability, recyclability, and tunable surface features. Initially, three nanocellulose types (i.e., bacterial nanocellulose, nanocrystals, and nanofibers) and their potential biotechnological production routes have been discussed in detail. Contemporary studies are discussed in the development of nanocellulose aerogels, responsive hydrogels, injectable hydrogels/implants, and magnetic nanocellulose. Moreover, the development of hydrogels and potential crosslinking agents for the induction of desired properties has been described. Studies have revealed that the release kinetics of nanocellulosic gels/hydrogels varies from few minutes to several days depending on the given physicochemical conditions. However, such systems provide sustained drug release properties, so they are considered "smart" systems. Recent studies on controlled drug delivery systems have demonstrated their considerable potential for the next-generation transport of therapeutic drugs to target sites via various administration routes. This review presents the selection of appropriate sources and processing methodologies for the development of target nanocellulose types. It explains the potential challenges and opportunities and recommends future research directions about the smart delivery of therapeutic drugs.

A Review on the Life Cycle Assessment of Cellulose: From Properties to the Potential of Making It a Low Carbon Material

The huge plastic production and plastic pollution are considered important global issues due to environmental aspects. One practical and efficient way to address them is to replace fossil-based plastics with natural-based materials, such as cellulose. The applications of different cellulose products have recently received increasing attention because of their desirable properties, such as biodegradability and sustainability. In this regard, the current study initially reviews cellulose products' properties in three categories, including biopolymers based on the cellulose-derived monomer, cellulose fibers and their derivatives, and nanocellulose. The available life cycle assessments (LCA) for cellulose were comprehensively reviewed and classified at all the stages, including extraction of cellulose in various forms, manufacturing, usage, and disposal. Finally, due to the development of low-carbon materials in recent years and the importance of greenhouse gases (GHG) emissions, the proposed solutions to make cellulose a low carbon material were made. The optimization of the cellulose production process, such as the recovery of excessive solvents and using by-products as inputs for other processes, seem to be the most important step toward making it a low carbon material.

Chronicle of Nanocelluloses (NCs) for Catalytic Applications: Key Advances

Nanocellulose (NC) is a biomaterial with growing interest in the field of nanocomposites and sustainable materials. NC has various applications including biodegradable materials, reinforcing agents, packaging films, transpiring membranes and medical devices. Among the many applications, the use of NC functionalized with organic and inorganic groups has found wide use as a catalyst in chemical transformations. The goal of this review is to collect the current knowledge on its catalytic applications for chemical groups conversion. We have chosen to organize the manuscript according to subdivision of NC into Bacterial Nanocellulose (BNC), Cellulose Nanocrystals (CNCs), and Cellulose Nanofibers (CNFs) and their role as inorganic- and organic-functionalized NC-catalysts in organic synthesis. However, in consideration of the fact that the literature on this field is very extensive, we have decided to focus our attention on the scientific productions of the last five years.

Fabrication of Pd NPs on pectin-modified Fe3O4 NPs: A magnetically retrievable nanocatalyst for efficient C-C and C-N cross coupling reactions and an investigation of its cardiovascular protective effects

The present report represents the synthesis of a novel Pd NPs immobilized over a natural polysaccharide (pectin) coated Fe₃O₄ magnetic nanocomposite material (Fe₃O₄@pectin/Pd) for investigating the cardiovascular protective effects. The biomolecular functionalization not only stabilizes the ferrite nanoparticles from agglomeration but also provides an environment for the biogenic reduction of Pd²⁺ ions. This protocol is a promising breakthrough for the synthesis of a quasi-heterogeneous catalyst, a bridge between heterogeneous and homogeneous medium. The structure, morphology and physicochemical properties of the material were characterized utilizing various analytical techniques like FT-IR, FE-SEM, TEM, VSM, EDX-elemental mapping, ICP, EDX and XPS. The catalyst showed excellent reactivity in C-C and C-N cross coupling reactions via Suzuki and Buchwald-Hartwig reactions respectively. An array of different biphenyls and aryl amines were then procured by reactions of various aryl halides with phenylboronic acid or secondary amines over the catalyst affording good to excellent yields. The catalyst was easily recoverable using an external magnet and thereafter recycled for several trials with insignificant palladium leaching or loss in catalytic performance. To investigate the cardiovascular protective activities of catalyst, the MTT assay was done on Human Aortic Endothelial Cells (HAEC), Human Coronary Artery Endothelial Cells (HCAEC), and Human Pulmonary Artery Endothelial Cells (HPAEC) cell lines. Nanocatalyst-treated cell cutlers significantly (p ≤ 0.01) decreased the caspase-3 activity, and DNA fragmentation. It raised the cell viability and mitochondrial membrane potential in the high concentration of Mitoxantrone-treated HAEC, HCAEC, and HPAEC cells. According to the above findings, nanocatalyst can be administrated as a cardiovascular protective drug for the treatment of cardiovascular diseases after approving in the clinical trial studies in humans.