Rheological behavior of wheat starch and barley resistant starch (type IV) blends and their starch noodles making potential

Physicochemical, thermal, and digestive properties of achira starch modified through single and dual chemical modifications

This research aimed to investigate the effects of single and dual chemical modifications on the physicochemical, thermal, rheological, and digestibility properties of achira starch (NS). The single modification involved mild acid hydrolysis of NS with 0.1 M hydrochloric acid for 6 and 12 h. The dual modification was carried out in a starch slurry with octenyl succinic anhydride (3% starch-based) or citric acid (CA) (0.43 g/mL) after each hydrolysis treatment. Fourier transform infrared and X-ray diffraction analyses demonstrate that dual modification changed the structural organization of NS in a more significant way than single. The mass loss was reduced from 60.94% (NS) to 50.03% (modified starches). Water soluble index increased until 6.46 g/g, and swelling power revealed a dimished of 77.31% in comparison to NS. Modified starches' peak viscosity was significantly lower (from 0.43 Pa·s until imperceptible), attributed to starch chain hydrolysis and the incorporation of ester groups. The analysis of digestive properties revealed no significant impact on the slowly digestible starch (SDS) content among the uncooked samples. However, the dual modification with CA for 6 and 12 h significantly reduced rapidly digestible starch (from 80.87% to 18.62%) and SDS alongside increased resistant starch (from 13.91% to 79.80%). This study indicates that dual chemical modification produces more distinct changes to expand the application of starch in sauces, soups, frozen food, and dairy food. PRACTICAL APPLICATION: •Dual chemical modification through acid hydrolysis and citric acid esterification produced functionalized achira starches with high resistant starch content. •Dual chemical modification resulted in starches with enhanced thermal stability for thermally processed and frozen foods.

Changes in Functional Properties and In Vitro Digestibility of Black Tartary Buckwheat Starch by Autoclaving Combination with Pullulanase Treatment

The processing properties of resistant starch (RS) and its digestion remain unclear, despite the widespread use of autoclaving combined with debranching in its preparation. In this study, the physicochemical, rheological and digestibility properties of autoclaving modified starch (ACB), autoclaving-pullulanase modified starch (ACPB) and native black Tartary buckwheat starch (NB) were compared and investigated. The molecular weight and polydispersity index of modified starch was in the range of 0.15 × 104~1.90 × 104 KDa and 1.88~2.82, respectively. In addition, the SEM results showed that both modifications influenced the morphological characteristics of the NB particles, and their particles tended to be larger in size. Autoclaving and its combination with pullulanase significantly increased the short-range ordered degree, resistant starch yield and water- and oil-absorption capacities, and decreased the syneresis properties with repeated freezing/thawing cycles. Moreover, rheological analysis showed that both ACB and ACPB exhibited shear-thinning behavior and lower gel elasticity as revealed by the power law model and steady-state scan. The degradation of starch chains weakened the interaction of starch molecular chains and thus changed the gel network structure. The in vitro digestion experiments demonstrated that ACB and ACPB exhibited greater resistance to enzymatic digestion compared to the control, NB. Notably, the addition of pullulanase inhibited the hydrolysis of the ACB samples, and ACPB showed greater resistance against enzymatic hydrolysis. This study reveals the effects of autoclaving combined with debranching on the processing properties and functional characteristics of black Tartary buckwheat starch.

Ultrasound-assisted germination of red kidney beans: Enhancements in physicochemical and nutritional profiles

To improve the conventional germination process and improve the nutritional quality of red kidney beans, this study employed high-intensity ultrasound (HIU) supplemented with hydrogen peroxide as a pre-germination treatment. The results showed that the 350 W-10 min treatment yielded the highest germination rate (77.09%), with its sprout length 81.13% greater than that of the control group. The 350 W-10 min treatment increased total protein, soluble protein, and ash content, while simultaneously reducing the fat, starch, and soluble sugar content. The HIU treatment accelerated the accumulation of phenolic and flavonoid compounds, ascorbic acid, and γ-aminobutyric acid. The 350 W-10 min treatment also decreased the levels of phytic acid, trypsin inhibitor activity, and tannin by 42.71%, 65.58%, and 53.18%, respectively. Furthermore, ultrasonic cavitation enhanced antioxidative capacity and improved amino acid composition and protein digestibility. Consequently, HIU serves as a cost-efficient method to accelerate the germination process and enhance their nutritional composition.

Preparation and Properties of Walnut Protein Isolate-Whey Protein Isolate Nanoparticles Stabilizing High Internal Phase Pickering Emulsions

To enhance the functional properties of walnut protein isolate (WalPI), hydrophilic whey protein isolate (WPI) was selected to formulate WalPI-WPI nanoparticles (nano-WalPI-WPI) via a pH cycling technique. These nano-WalPI-WPI particles were subsequently employed to stabilize high internal phase Pickering emulsions (HIPEs). By adjusting the mass ratio of WalPI to WPI from 9:1 to 1:1, the resultant nano-WalPI-WPI exhibited sizes ranging from 70.98 to 124.57 nm, with a polydispersity index of less than 0.326. When the mass ratio of WalPI to WPI was 7:3, there were significant enhancements in various functional properties: the solubility, denaturation peak temperature, emulsifying activity index, and emulsifying stability index increased by 6.09 times, 0.54 °C, 318.94 m2/g, and 552.95 min, respectively, and the surface hydrophobicity decreased by 59.23%, compared with that of WalPI nanoparticles (nano-WalPI), with the best overall performance. The nano-WalPI-WPI were held together by hydrophobic interactions, hydrogen bonding, and electrostatic forces, which preserved the intact primary structure and improved resistance to structural changes during the neutralization process. The HIPEs stabilized by nano-WalPI-WPI exhibited an average droplet size of less than 30 μm, with droplets uniformly dispersed and maintaining an intact spherical structure, demonstrating superior storage stability. All HIPEs exhibited pseudoplastic behavior with good thixotropic properties. This study provides a theoretical foundation for enhancing the functional properties of hydrophobic proteins and introduces a novel approach for constructing emulsion systems stabilized by composite proteins as emulsifiers.

Effect of modified starches on the quality of skins of glutinous rice dumplings

This study aimed to investigate the influence of modified starches on the quality of skins of glutinous rice dumplings (SGRDs), including changes in textural properties, pasting parameters, microstructure, color, transparency, and sensory quality. The results showed that the addition of a single acetylated-modified cassava or potato starch or composite modified cassava and potato starch in a ratio of 2:1 can improve the quality of SGRDs. The springiness and lightness of SGRDs increased, and the transparency increased from 3.22 % to 6.18 %. The cooked samples had delicate mouth-feel, uniform color and luster, good transparency, no depression, and low weight loss and did not stick to the teeth. Moreover, the total consumer acceptability score increased from 60.67 to 89.33, indicating that these products were widely accepted by consumers. However, the addition of hydroxypropyl-modified cassava starch or its composite with other two modified starches had no apparent effect on the quality of SGRDs. In conclusion, the quality of SGRDs were significantly improved by the addition of single or composite acetylated-modified starches. This study provides a theoretical basis for improving the quality of SGRDs.

The Impact of Fermented Scald on Rye and Hull-Less Barley Dough and Bread Structure Formation

In wholemeal bread production, scalding and fermentation contribute to the improvement of the structural characteristics of the dough and bread. The influence of fermented scald on rye and barley dough and bread structure formation was specified in this study. The microstructural analysis performed using a scanning electron microscope revealed the separation of phases during the fermentation of scalds. According to the storage G' and loss G″ moduli, both scalds exhibited elastic character over viscous. The fermentation of barley scald increased both moduli and complex viscosity, while no substantial changes were observed in the fermented rye scald. The addition of fermented scald containing partially hydrolyzed starch and a fraction of water-soluble compounds contributed positively to the formation of a well-organized structure of dough fermented for 4 h. Fermentation substantially reduced the dough's complex viscosity and moduli values, confirming the partial structure alteration leading to the viscous portion increase. The dough with fermented scald showed a significantly lower loss factor than the dough without fermented scald, indicating enhanced mechanical process ability. The most substantial weakening of the structure was observed for dough without scald. The addition of rye scald to the rye dough promoted the formation of fewer pores with relatively smaller specific volumes.

Retrogradation inhibition of wheat starch with wheat oligopeptides

Starch staling greatly reduces the cereal products quality, and the staling retardation becomes a focus in current research. The effect of wheat oligopeptide (WOP) on anti-staling properties of wheat starch (WS) was studied. Rheology property indicated that WOP reduced WS viscosity, showing more liquid-like behavior. WOP improved the water holding capacity, inhibited swelling power, and reduced the hardness of WS gels, which decreased from 1200 gf to 800 gf compared with the control after 30 days storage. Meanwhile, the water migration of WS gels were also reduced with WOP incorporation. The relative crystallinity of WS gel with 1% WOP was reduced by 13.3%, and the pore size and the microstructure of gels was improved with WOP. Besides, the short-range order degree reached the lowest value with 1% WOP. In conclusion, this study explained the interaction between WOP and WS, which was beneficial to the application of WOP in WS-based food.

Starch-based noodles: Current technologies, properties, and challenges

Starch noodles are gaining interest due to the massive popularity of gluten-free foods. Modified starch is generally used for noodle production due to the functional limitations of native starches. Raw materials, methods, key processing steps, additives, cooking, and textural properties determine the quality of starch noodles. The introduction of traditional, novel, and natural chemical additives used in starch noodles and their potential effects also impacts noodle quality. This review summarizes the current knowledge of the native and modified starch as raw materials and key processing steps for the production of starch noodles. Further, this article aimed to comprehensively collate some of the vital information published on the thermal, pasting, cooking, and textural properties of starch noodles. Technological, nutritional, and sensory challenges during the development of starch noodles are well discussed. Due to the increasing demands of consumers for safe food items with a long shelf life, the development of starch noodles and other convenience food products has increased. Also, the incorporation of modified starches overcomes the shortcomings of native starches, such as lack of viscosity and thickening power, retrogradation characteristics, or hydrophobicity. Starch can improve the stability of the dough structure but reduces the strength and resistance to deformation of the dough. Some technological, sensory, and nutritional challenges also impact the production process.

Study on structural characteristics, physicochemical properties, and in vitro digestibility of Kudzu-resistant starch prepared by different methods

Three different methods, including autoclaving, autoclaving-debranching, and purification, were used to prepare Kudzu-resistant starch (KRS) from Kudzu starch (KS). The physicochemical properties, such as thermodynamic properties, pasting properties, solubility, swelling, and coagulability, as well as the in vitro digestive characteristics of the three kinds of KRS were studied. The results showed that the morphology of starch granules of KRS prepared by autoclave, autoclave enzymatic hydrolysis, and purification methods was changed and the relative crystallinity was significantly decreased compared with the original starch. X-ray diffraction (XRD) showed that KRS exists in the form of C and C+V crystalline form. There was a significant increase in the pasting temperature and a remarkable decrease in the peak viscosity and the expansion degree of the KRS prepared by all three methods. The solubility of the resistant starch (RS) obtained by autoclaving-debranching and that by purification were both increased compared to that of native KS, while the solubility of the RS obtained by autoclaving was decreased. Meanwhile, the retrogradation of the three RS was also improved to varying degrees. The contents of RS in the samples were: P-KRS (71%) > DA-KRS (43%) > A-KRS (42%) > KS (9%). Simulated human in vitro digestion experiments showed that RS has stronger antidigestibility properties than native starch. Among them, the RS prepared by the purification method has stronger antidigestive properties, and it is predicted that it may have a better potential value in regulating blood glucose. These results indicated that the processing properties of KRS, especially the digestibility, are significantly improved and can be used as a new functional food ingredient, which deserves thorough study.

Effects of different modified starches and gums on the physicochemical, functional, and microstructural properties of tapioca pearls

The effects of different modified starch and gums on the physicochemical, functional, and microstructural properties of tapioca pearls were investigated. The addition of starch acetate (SA) and carboxymethylcellulose (CMC) improved the springiness, hardness, cooking properties, and overall acceptability of pearls. Samples added with CMC presented higher peak viscosities, breakdown viscosities, onset gelatinization temperature, and lower enthalpy of gelatinization values compared to control pearls. Furthermore, Rheology and LF-NMR results indicated that all five kinds of modifiers promoted the formation of tighter network structures in products. SEM showed that the addition of SA and hydroxypropyl distarch phosphate (HDP) could fill the voids in the internal gel network of the pearls, thus promoting the formation of a continuous phase network. This study proved SA, HDP, and CMC as modifiers could have tremendous potential to improve the quality of pearls before and after cooking.

Development and Characterization of Physical Modified Pearl Millet Starch-Based Films

Pearl millet is an underutilized and drought-resistant crop that is mainly used for animal feed and fodder. Starch (70%) is the main constituent of the pearl millet grain; this starch may be a good substitute for major sources of starch such as corn, rice, potatoes, etc. Starch was isolated from pearl millet grains and modified with different physical treatments (heat-moisture (HMT), microwave (MT), and sonication treatment (ST)). The amylose content and swelling capacity of the starches decreased after HMT and MT, while the reverse was observed for ST. Transition temperatures (onset (To), peak of gelatinization (Tp), and conclusion (Tc)) of the starches ranged from 62.92-76.16 °C, 67.95-81.05 °C, and 73.78-84.50 °C, respectively. After modification (HMT, MT, and ST), an increase in the transition temperatures was observed. Peak-viscosity of the native starch was observed to be 995 mPa.s., which was higher than the starch modified with HMT and MT. Rheological characteristics (storage modulus (G') and loss modulus (G'')) of the native and modified starches differed from 1039 to 1730 Pa and 83 to 94 Pa; the largest value was found for starch treated with ST and HMT. SEM showed cracks and holes on granule surfaces after HMT as well as MT starch granules. Films were prepared using both native and modified starches. The modification of the starches with different treatments had a significant impact on the moisture, transmittance, and solubility of films. The findings of this study will provide a better understanding of the functional properties of pearl millet starch for its possible utilization in film formation.

Rheological and technological characterization of red rice modified starch and jaboticaba peel powder mixtures

Properties of modified starch and its interaction with functional raw materials are of great interest to the food industry. Thus, this study aimed to evaluate the rheological and technological characterization of starches modified by the action of the enzymes α-amylase and amyloglucosidase and their mixtures with jaboticaba peel powder. The parameters of firmness, gumminess, and final viscosity of starches paste increased, and the tendency to setback was reduced with the addition of jaboticaba peel powder. Starches and mixtures presented shear-thinning behavior. The addition of jaboticaba peel powder to starches increased water, oil, and milk absorption capacity, while syneresis remained stable over the storage period. The addition of jaboticaba peel powder had a positive effect on native and modified starches' rheological and technological properties, qualifying it as an alternative for developing new functional food products.

Production and Properties of Starch Citrates-Current Research

Starch modification by chemical reaction is widely used to improve the properties of native starch. Modified by citric acid, starch is characterized by specific properties resulting from the presence of citrate residues and as a result of cross-linking starch. The chemicals used for preparing starch citrates are safe for human health and the natural environment compared to the harsh chemicals used for conventional modifications. Starch citrates are traditionally produced by heating starch-citric acid mixtures in semi-dry conditions or by a heat moisture treatment. The conditions of the modification process (roasting temperature, heating time, citric acid dose) and the botanic source or genotype of starch determine the degree of substitution and the properties of the obtained preparations. Changes of starch properties occurring during esterification lead to reduced relative crystallinity, resulting in a decrease in the affinity for water, the gelatinization parameters, and the viscosity of starch citrate. However, one of the most important outcome of the modification is the formation of resistant starch (RS), which has increased resistance to the action of amylolytic enzymes. Currently, new methods for producing starch citrates with improved functional and rheological properties while maintaining the highest possible content of resistant starch are being sought. The article presents an overview of recent studies on the production, properties. And applicability of starch citrates with special attention paid to their role as preparations of resistant starch (RS). The use of citric acid for modification of starch is better for the technology process, while using cross-linking is better than simply using esterification.

Molecular Mechanism of Functional Ingredients in Barley to Combat Human Chronic Diseases

Barley plays an important role in health and civilization of human migration from Africa to Asia, later to Eurasia. We demonstrated the systematic mechanism of functional ingredients in barley to combat chronic diseases, based on PubMed, CNKI, and ISI Web of Science databases from 2004 to 2020. Barley and its extracts are rich in 30 ingredients to combat more than 20 chronic diseases, which include the 14 similar and 9 different chronic diseases between grains and grass, due to the major molecular mechanism of six functional ingredients of barley grass (GABA, flavonoids, SOD, K-Ca, vitamins, and tryptophan) and grains (β-glucans, polyphenols, arabinoxylan, phytosterols, tocols, and resistant starch). The antioxidant activity of barley grass and grain has the same and different functional components. These results support findings that barley grain and its grass are the best functional food, promoting ancient Babylonian and Egyptian civilizations, and further show the depending functional ingredients for diet from Pliocene hominids in Africa and Neanderthals in Europe to modern humans in the world. This review paper not only reveals the formation and action mechanism of barley diet overcoming human chronic diseases, but also provides scientific basis for the development of health products and drugs for the prevention and treatment of human chronic diseases.