Functional and thermal behaviors of heat-moisture treated elephant foot yam starch

Effect of pin to plate atmospheric cold plasma on physicochemical and functional properties of elephant foot yam (Amorphophallus paeoniifolius) starch

This study investigated the effect of atmospheric pressure pin-to-plate cold plasma on physicochemical and functional properties of elephant foot yam starch (EFYS). The isolated EFYS was subjected to the plasma treatment at varying voltages (190 V, 210, V and 230 V) for 5, 10 and 15 min of exposure. The control and treated starches were analysed for pH, amylose content, carboxyl group, paste clarity, water and oil binding property, pasting property, DSC, FTIR, XRD and SEM. There has been a significant reduction (p < 0.05) in pH values of starch from 7.22 to 4.92 and also reduction in turbidity values by 32.48 %. Plasma treatment improved paste clarity and storage stability. However, a significant increase was observed in the oil (1.26-3.80 g/g) and water binding capacity (1.47-1.91 g/g) of the starch. The structural modification, including surface etching, has been confirmed by FTIR and SEM analysis. Plasma treatment significantly increased starch crystallinity, which correlated with higher gelatinization enthalpy, indicating enhanced thermal stability due to plasma induced crosslinking. FTIR data confirmed that cross-linking takes place in samples treated at lower voltages (190Vand 210 V) followed by depolymerization occurring in harshly treated plasma samples (230 V for 15 min).

Enhancing starch properties through dual modification: Ultrasonication and acetic acid treatment of non-conventional starches

This study investigated the effects of ultrasonication (US) and acetic acid treatments on starches extracted from non-conventional sources: elephant foot yam (NES), cassava (NCS) and sweet potato (NSP). The starches underwent ultrasonication at 40°C for 3, 9, and 15 min, followed by acetylation, with native starches used as control. The morphological, physicochemical, and functional properties were comprehensively analyzed. Results revealed that increased treatment time significantly (p<0.05) affected the starches functional properties, morphology and crystallinity. Amylose content was highest in NES (22.85 %), followed by NSP (21.05 %) and NCS (19.28 %). Following dual modification, a significant reduction in amylose content was observed in ultrasonic-assisted acetylated starches. Morphological analysis revealed granular aggregation, surface changes, and the formation of pores and cracks. X-ray diffraction (XRD) patterns demonstrated that NSP and NES starches exhibited major peaks characteristic of C-type starches, while NCS starches displayed an A-type pattern. Following ultrasound-assisted acetylation, the crystalline structures of all starches remained largely unchanged, although relative crystallinity slightly decreased compared to native starches. The oil absorption capacity and tap density of NES increased with dual modification, suggesting enhanced hydrophobicity. These findings highlight the potential of dual modification to improve starch properties for industrial applications, including confectionery, edible films, tablet binders, and encapsulation.

Physicochemical, structural properties, and in vitro digestibility of starches isolated from Amorphophallus konjac K. Koch and Amorphophallus dunnii: A comparison study

This study compared the physicochemical and structural properties, and in vitro digestibility of Amorphophallus konjac K. Koch starch (AKS) and Amorphophallus dunnii starch (ADS), by using potato starch (PS) as a control. ADS exhibited larger granule sizes, which led to higher transparency, swelling power (SP), and water solubility than AKS. Both AKS and ADS exhibited A-type crystalline patterns; however, ADS demonstrated higher relative crystallinity, gelatinization transition temperatures, and enthalpies of gelatinization, which may be due to higher 1047/1022 and more double helix contents. Regarding rheological and pasting properties, ADS exhibited greater viscosity than that of AKS, likely due to larger particle size and higher SP. In vitro digestion analysis revealed that >50 % of each starch type consisted of rapidly digestible starch. Notably, ADS contained the highest amount of resistant starch among the three types. The estimated glycemic index (eGI) values of AKS and ADS were 65.54 ± 0.54 and 63.28 ± 0.36, respectively, indicating that both starch types belong to the medium GI food category, though AKS was significantly higher than ADS. These findings suggest that konjac starch serves as a beneficial dietary carbohydrate alternative. AKS may be suited for fast-digesting food formulas for individuals with digestive impairment, whereas ADS could be advantageous for those managing diabetes.

Removal of proteins and lipids affects structure, in vitro digestion and physicochemical properties of rice flour modified by heat-moisture treatment

BACKGROUND

The objective of this experiment was to investigate the role of endogenous proteins and lipids in the structural and physicochemical properties of starch in heat-moisture treatment (HMT) rice flour and to reveal their effect on starch digestibility under heat.

RESULTS

The findings indicate that, in the absence of endogenous proteins and lipids acting as a physical barrier, especially proteins, the interaction between rice flour and endogenous proteins and lipids diminished. This reduction led to fewer starch-protein inclusion complexes and starch-lipid complexes, altering the granule aggregation structure of rice flour. It resulted in a decrease in particle size, an increase in agglomeration between starch granules, and more surface cracking on rice granules. Under HMT conditions with a moisture content of 30%, slight gelatinization of the starch granules occurred, contributing to an increased starch hydrolysis rate. In addition, the elevated thermal energy effect of HMT enhanced interactions between starch molecular chains. These resulted in a decrease in crystallinity, short-range ordering, and the content of double-helix structure within starch granules. These structural transformations led to higher pasting temperatures, improved hot and cold paste stability, and a decrease in peak viscosity, breakdown, setback, and enthalpy of pasting of the starch granules.

CONCLUSION

The combined analysis of microstructure, physicochemical properties, and in vitro digestion characteristics has enabled us to further enhance our understanding of the interaction mechanisms between endogenous proteins, lipids, and starches during HMT. © 2024 Society of Chemical Industry.

Influence of crystalline properties on starch functionalization from the perspective of various physical modifications: A review

The relationship between structural properties and functional characteristics of starch remains a hot subject among researchers. The crystalline property is a substantial characteristic of starch granules, undergoing different changes during modification techniques. These changes are closely related to the functional properties of modified starches. Physical modifications are eco-friendly techniques and are widely adopted for starch modifications. Therefore, understanding the impact of changes in crystalline properties during different physical modifications on starch functionality is the ultimate way to improve their industrial utilization. However, the existing literature still lacks the elucidation of changes in functional properties of starch in accordance with its crystalline properties during different physical treatments. Hence, this review summarizes the effects of the most important and widely used physical modifications on starch crystalline properties, highlighting the alterations in various functional properties such as hydration, pasting, gelatinization, and in vitro digestibility resulting from changes in crystalline characteristics in a single comprehensive discussion. Furthermore, the current review gives direction for envisaging the functionalization of starches based on deviations in the crystalline properties during several physical treatments.

Starch-based biodegradable films amended with nano-starch and tannic acid-coated nano-starch exhibit enhanced mechanical and functional attributes with antimicrobial activity

Starch-based biofilms are biodegradable, but their application is limited by lower mechanical strength and absence of antimicrobial properties. In this context, the present study attempted to unleash the potential of nanotechnology for synthesizing nano-starch (NS) and tannic acid-coated nano-starch (T-NS) for augmenting the tensile strength and antimicrobial properties of starch-based biofilms. Moreover, this study reports one of the first such attempts to improve the commercial viability of starch extracted from the corms of Amorphophallus paeoniifolius. In this study, NS and T-NS samples were first synthesized by the physical and chemical modification of the native starch (S) molecules. The NS and T-NS samples showed significantly smaller granule size, lower moisture content, and swelling power. Further, amendments with NS and T-NS samples (25 % and 50 %) to the native starch molecules were performed to obtain biofilm samples. The NSB (NS amended) and T-NSB (T-NS amended) biofilms showed comparatively higher tensile strength than SB films (100 % starch-based). The T-NSB showed greater antimicrobial activity against gram-positive and gram-negative bacteria. All the biofilms showed almost complete biodegradation in soil (in 10 days). Therefore, it can be concluded that additives like NS and T-NS can improve starch-based biofilms' mechanical strength and antimicrobial properties with considerable biodegradability.

Jicama (Pachyrhizus spp.) a nonconventional starch: A review on isolation, composition, structure, properties, modifications and its application

Starch attracts food industries due to their availability in nature, cheapness, biodegradability and possibilities of endless applications. The starch properties and their modification affect food quality. Compared to other cereals, tuber and root starches, more systematic information is needed on the jicama starches (JS). This review article summarizes the isolation, composition, morphology, rheological, thermal and digestibility properties of JS. The modifications and its current and potential applications are also discussed. The chemical composition and structure of JS are different from other starches, influencing its properties. JS has been modified by physical and chemical methods to improve the properties of starch. However, there are very few studies on the modification of JS as compared with other commercial starch although it has been used in food formulation as a stabilizer and to improve the texture of food products. It is also applied as an edible coating to preserve the quality of food products and use as a raw material for making edible and bioplastic packaging. However, large-scale utilization of JS is unexplored compared to commercial starches. Therefore, this review would provide useful information and suggestions for more research on Jicama starch and its industrial applications.

A review of starch swelling behavior: Its mechanism, determination methods, influencing factors, and influence on food quality

Swelling behavior involves the process of starch granules absorbing enough water to swell and increase the viscosity of starch suspension under hydrothermal conditions, making it one of the important aspects in starch research. The changes that starch granules undergo during the swelling process are important factors in predicting their functional properties in food processing. However, the factors that affect starch swelling and how swelling, in turn, affects the texture and digestion characteristics of starch-based foods have not been systematically summarized. Compared to its long chains, the short chains of amylose easily interact with amylopectin chains to inhibit starch swelling. Generally, reducing the swelling of starch could increase the strength of the gel while limiting the accessibility of digestive enzymes to starch chains, resulting in a reduction in starch digestibility. This article aims to conduct a comprehensive review of the mechanism of starch swelling, its influencing factors, and the relationship between swelling and the pasting, gelling, and digestion characteristics of starch. The role of starch swelling in the edible quality and nutritional characteristics of starch-based foods is also discussed, and future research directions for starch swelling are proposed.

Optimization of starch extraction from Amorphophallus paeoniifolius corms using response surface methodology (RSM) and artificial neural network (ANN) for improving yield with tenable chemical attributes

The development of the extraction process for improving the starch yield from unconventional plants is emerging as a topic of interest. In this respect, the present work aimed to optimize the starch extraction from the corms of elephant foot yam (Amorphophallus paeoniifolius) with the help of response surface methodology (RSM) and artificial neural network (ANN). The RSM model performed better than the ANN in predicting the starch yield with higher precision. In this connection, this study for the first time reports the significant improvement of starch yield from A. paeoniifolius (51.76 g/100 g of the corm dry weight). The extracted starch samples based on yield - high (APHS), medium (APMS), and low (APLS) exhibited a variable granule size (7.17-14.14 μm) along with low ash content, moisture content, protein, and free amino acid indicating purity and desirability. The FTIR analysis also confirmed the chemical composition and purity of the starch samples. Moreover, the XRD analysis showed the prevalence of C-type starch (2θ = 14.303°). Based on other physicochemical, biochemical, functional, and pasting properties, the three starch samples showed more or less similar characteristics thereby indicating the sustentation of beneficial attributes of starch molecules irrespective of the variation in extraction parameters.

Effects of Heat-Moisture Treatment on the Digestibility and Physicochemical Properties of Waxy and Normal Potato Starches

Heat-moisture treatment (HMT) is a safe, environmentally friendly starch modification method that reduces the digestibility of starch and changes its physicochemical properties while maintaining its granular state. Normal potato starch (NPS) and waxy potato starch (WPS) were subjected to HMT at different temperatures. Due to erosion by high-temperature water vapor, both starches developed indentations and cracks after HMT. Changes were not evident in the amylose content since the interaction between the starch molecules affected the complexation of amylose and iodine. HMT increased pasting temperature of NPS from 64.37 °C to 91.25 °C and WPS from 68.06 °C to 74.44 °C. The peak viscosity of NPS decreased from 504 BU to 105 BU and WPS decreased from 384 BU to 334 BU. The crystallinity of NPS decreased from 33.0% to 24.6% and WPS decreased from 35.4% to 29.5%. While the enthalpy values of the NPS declined from 15.74 (J/g) to 6.75 (J/g) and WPS declined from 14.68 (J/g) to 8.31 (J/g) at 120 °C. The solubility and swelling power of NPS decreased while that of WPS increased at 95 °C. Due to the lack of amylose in WPS, at the same HMT processing temperature, the reduction in peak viscosity of treated WPS compared to that of native starch was smaller than that of NPS. The resistant starch (RS) content of NPS after HMT at 120 °C was 73.0%. The slowly digestible starch (SDS) content of WPS after HMT at 110 °C was 37.6%.

In Vitro Starch Digestibility, Rheological, and Physicochemical Properties of Water Caltrop Starch Modified with Cycled Heat-Moisture Treatment

This study focused on the effect of cycled heat-moisture treatment (cHMT) on the in vitro digestibility, rheological, and physicochemical properties of water caltrop starch. The amylose content increased significantly by cHMT, whereas damaged starch content decreased only in the groups with more than two cycles applications. cHMT generally increased the weight-average molecular weight, except for single cycle treatment which showed the reverse result. In thermal properties, the onset temperature (T0), peak temperature (Tp), and conclusion temperature (Tc) increased, while the enthalpy needed to complete the gelatinization was lowered by cHMT. Water caltrop starch paste showed less shear-thinning behavior with cHMT. Meanwhile, the viscosity and tendency to form strong gel were enfeebled with modification. cHMT significantly changed predicted glycemic index (pGI) value, especially in samples that underwent the most cycles of treatment, which showed the lowest pGI compared to native and other treatment. These results suggested that cHMT water caltrop starch was effectively modified and showed diversified properties.

Effect of yam (Dioscorea spp.) starch on the physicochemical, rheological, and sensory properties of yogurt

This study investigated the effect of the addition of starch from “hawthorn” yam (Dioscorea rotundata) and “creole” yam (Dioscorea alata) at different concentrations (0.1%, 0.3%, and 0.5% w/w) on the physicochemical and sensory properties of stirred-type yogurt. Pectin (0.3% w/w) was used as a reference stabilizer. Yogurt with yam starch presented 13.38% less syneresis than yogurts with pectin. At the sensory level, the most accepted treatment was yogurt with “creole” yam starch at 0.1% w/w. During 21 days of storage, yogurt with yam starch (“creole” and “hawthorn”) at 0.1% w/w showed a decrease in syneresis between 7% and 8%, while in those with pectin, syneresis remained practically constant in this period. Yogurt with yam starch was characterized as a pseudoplastic fluid, with a lactic acid bacterial count according to NTC 805. Yam starch can be used as stabilizer because it improves the physicochemical, sensory, and rheological characteristics of stirred-type yogurt. Especially the “creole” yam starch (0.1% w/w), which presents the best preference by consumers.

Properties of High-Swelling Native Starch Treated by Heat-Moisture Treatment with Different Holding Times and Iterations

Tapioca and potato starches were used to investigate the effect of heat-moisture treatment (HMT; 95-96 °C, 0-60 min, 1-6 iterations) on gelatinization properties, swelling power (SP), solubility and pasting properties. Tapioca starch had similar content and degree of polymerization of amylose, but a higher amylopectin short/long chain ratio, to potato starch. After HMT, the gelatinization temperature range was narrowed for tapioca starch, but was widened for potato starch. Decreases in SP and solubility were less for tapioca than potato starches, coinciding with a progressive shift to the moderate-swelling pasting profile for tapioca but a drastic change to the restricted-swelling profile for potato. Moreover, decreasing extents of SP and maximum viscosity for HMT tapioca starch were, respectively, in the range of 47-63% and 0-36%, and those of HMT potato starch were 89-92% and 63-94%. These findings indicate that the granule expansion and viscosity change of starch during gelatinization can be tailored stepwise by altering the HMT holding time and iteration.

Recent advances in heat-moisture modified cereal starch: Structure, functionality and its applications in starchy food systems

Cereals, one of the starch sources, have a tremendous and steady production worldwide. Starchy foods constitute the major part of daily calorie intake for humans. As a simple and green modification approach, heat-moisture treatment (HMT) could change the granular surface characteristics and size, crystalline and helical structure, as well as molecular organization of cereal starch. The changing degree is contingent on HMT parameters and botanical origin. Based on the hierarchical structure, this paper reviews functionalities of heat-moisture modified cereal starch (HMCS) reported in latest years. The functionality of HMCS could be affected by co-existing non-starch ingredients through non-covalent/covalent interactions, depolymerization or simply attachment/encapsulation. Besides, it summarizes the modulation of HMCS in dough rheology and final food products' quality. Selecting proper HMT conditions is crucial for achieving nutritious products with desirable sensory and storage quality. This review gives a systematic understanding about HMCS for the better utilization in food industry.