Optimization of production and intrinsic viscosity of an exopolysaccharide from a high yielding Virgibacillus salarius BM02: Study of its potential antioxidant, emulsifying properties and application in the mixotrophic cultivation of Spirulina platensis

Prospecting the biotechnological potential of culturable halophilic bacteria isolated from Provadia salt deposit (Bulgaria) near the oldest salt production and urban complex in Europe

Halophilic bacteria are recognized as a promising source of novel enzymes and biopolymers with various applications in biotechnology and the industry. In comparison with their mesophilic analogues, halophilic metabolites are stable under extreme conditions typically encountered in the industrial processes. In this study, the biotechnological potential of twenty strains of halophilic bacteria isolated from the Provadia salt deposit, Bulgaria was investigated for the first time. The strains were identified based on the sequencing of the 16S rRNA gene and were assigned to 13 different species falling in the Bacillota and Pseudomonadota phyla. The majority (90%) of them showed single or combined hydrolytic enzyme activity. Half of the strains (55%) were able to produce between three and eight extracellular hydrolytic enzymes-arabinase, cellulase, gelatinase, glucanase, L-glutaminase, pectinase, and xylanase. Ten strains were able to synthesise exopolysaccharides (EPS) in concentration between 32 and 227 μg/ml. The optimal EPS production kinetics (1.6 ± 0.15 g/l) by Virgibacillus halodenitrificans PSZ-34 was systematically investigated for the first time. Three strains also exhibited antimicrobial activity. The present study involved culture-dependant isolation of halophilic bacteria from the Provadia salt deposit and shed more light on their capability to synthesise hydrolytic enzymes and EPS with potential industrial exploitation.

Mixotrophic Cultivation of Dunaliella tertiolecta in Cheese Whey Effluents to Enhance Biomass and Exopolysaccharides (EPS) Production: Biochemical and Functional Insights

The rapid growth of the dairy industry has resulted in a significant increase in the generation of effluents, which are characterized by a high organic content that poses environmental challenges. In alignment with sustainable practices and the principles of the circular economy, this study investigates the valorization of cheese whey (CW) effluents through the cultivation of the microalga Dunaliella tertiolecta under mixotrophic conditions. The research aims to utilize cheese whey effluents as a supplemental growth medium to enhance the production of algal biomass and extracellular polymeric substances (EPSs). The results reveal that CW facilitated a 37% improvement in D. tertiolecta growth and led to an approximately eight times greater biomass productivity compared to under photoautotrophic conditions, while the EPS production increased by 30%. Chemical and techno-functional analyses of the microalgal biomass and EPSs suggest promising applications as natural product additives for the food industry. Biomass derived from photoautotrophic culture demonstrated greater antioxidant activity and total polyphenols content. Additionally, the lipid profile revealed 16 distinct fatty acids. On the other hand, biomass from the mixotrophic culture exhibited higher protein levels and eight fatty acids, indicating the influence of the cultivation mode on the biochemical composition. Regarding the EPSs, mixotrophic cultivation resulted in elevated antioxidant activity and total polyphenols content, as well as higher protein and sugar levels. Furthermore, the EPSs produced under mixotrophic conditions exhibited superior techno-functional properties compared to those of the photoautotrophic culture, making them ideal candidates for use as alternative natural food additives.

A novel bioactive and functional exopolysaccharide from the cyanobacterial strain Arthrospira maxima cultivated under salinity stress

Cyanobacterial exopolysaccharides (EPS) remain released by cyanobacteria in the surrounding environment with the main purpose of protection against harmful environmental conditions. Recently, they have received significant attention due to their unique structural characteristics, functional properties, and potential applications across various fields. The current study describes the evaluation of EPS production under salinity stress from Arthrospira maxima. The application of high salinity up to 40 g/L enhanced EPS production, which was collected and purified by alcohol precipitation followed by membrane dialysis and lyophilization. A yield of 60 mg/L was obtained. The Size exclusion chromatography gave for the purified EPS an apparent molecular weight of 2.1 × 105 Da. Monosaccharide composition showed that EPS is a heteropolymer, with mannose, xylose, and glucuronic acid identified as the predominant monosaccharides and derivatives. Nuclear magnetic resonance spectroscopy (13C and 1H) confirmed that EPS is a heteropolysaccharide, entirely in α- anomeric configuration, with glucuronic acid as a main monomer that is probably linked to mannose and xylose via α-glycosidic linkages. Bioactivity assessment of EPS revealed that it exhibits antibacterial activity against several strains, notably, Bacillus subtilis (MIC: 0.6 ± 0.05 mg/mL), Bacillus cereus (MIC: 1 ± 0.01 mg/mL), Escherichia coli (MIC: 0.8 ± 0.01 mg/mL) and Klebsiella pneumonia (MIC: 0.8 ± 0.01 mg/mL). Antioxidant activity was measured using the DPPH radical scavenging assay, yielding an IC₅₀ of 6.83 mg/mL. Besides, EPS was also found to exhibit an interesting emulsifying property with several oil types, indicating its potential as a versatile biopolymer for applications in various industrial sectors.

Meta-Analysis of Abiotic Conditions Affecting Exopolysaccharide Production in Cyanobacteria

Background: cyanobacterial exopolysaccharides (EPSs) exhibit diverse biological and physicochemical properties, making them valuable for applications in environmental remediation, soil improvement, wastewater treatment, and bioenergy production. Results: the production of cyanobacterial EPSs is significantly influenced by various factors, including abiotic factors and strains. Recent research has focused on optimizing EPS production by regulating key abiotic factors such as light, temperature, pH, and nutritional conditions. This review systematically compiles and analyzes published data on the effects of abiotic factors on cyanobacterial EPS biosynthesis, with a focus on genus-specific responses. Using meta-analysis techniques, we provide a comprehensive overview of the key factors influencing EPS production. Light and nutrient conditions are the most significant factors affecting EPS production, with high light intensities and optimal nutrient conditions enhancing EPS synthesis. Optimal temperature ranges and pH levels are essential for maximizing EPS production, and cyanobacteria exhibit genus-specific responses to variations in these factors. The addition of specific nutrients, such as NaCl, trace metals (e.g., Mg, Zn, Cu), and elevated CO2 levels, significantly impacts EPS production. Conclusions: the response to these factors varies among different cyanobacterial genera, highlighting the need for genus-specific optimization strategies. This review provides a theoretical basis for optimizing EPS production across diverse cyanobacterial genera and for understanding multi-factor interactions and practical applications in future research.

Production optimization and antioxidant potential of exopolysaccharide produced by a moderately halophilic bacterium Virgibacillus dokdonensis VITP14

This study aimed to enhance the extracellular polymeric substances (EPS) production of Virgibacillus dokdonensis VITP14 and explore its antioxidant potential. EPS and biomass production by VITP14 strain were studied under different culture parameters and media compositions using one factor at a time method. Among different nutrient sources, glucose and peptone were identified as suitable carbon and nitrogen sources. Furthermore, the maximum EPS production was observed at 5% of inoculum size, 5 g/L of NaCl, and 96 h of fermentation. Response surface methodology was employed to augment EPS production and investigate the optimal levels of nutrient sources with their interaction. The strain was observed to produce actual maximum EPS of about 26.4 g/L for finalized optimum medium containing glucose 20 g/L, peptone 10 g/L, and NaCl 50 g/L while the predicted maximum EPS was 26.5 g/L. There was a nine fold increase in EPS production after optimization study. Additionally, EPS has exhibited significant scavenging, reducing, and chelating potential (>85%) at their higher concentration. This study imparts valuable insights into optimizing moderately halophilic bacterial EPS production and evaluating its natural antioxidant properties. According to findings, V. dokdonensis VITP14 was a promising isolate that will provide significant benefits to biopolymer producing industries.

Production of exopolysaccharide from Klebsiella oxytoca: Rheological, emulsifying, biotechnological properties, and bioremediation applications

Bacteria can synthesize a broad spectrum of multifunctional polysaccharides including extracellular polysaccharides (EPS). Bacterial EPS can be utilized in the food, pharmaceutical, and biomedical areas owing to their physical and rheological properties in addition to generally presenting low toxicity. From an ecological viewpoint, EPS are biodegradable and environment compatible, offering several advantages over synthetic compounds. This study investigated the EPS produced by Klebsiella oxytoca (KO-EPS) by chemically characterizing and evaluating its properties. The monosaccharide components of the KO-EPS were determined by HPLC coupled with a refractive index detector and GC-MS. The KO-EPS was then analyzed by methylation analysis, FT-IR and NMR spectroscopy to give a potential primary structure. KO-EPS demonstrated the ability to stabilize hydrophilic emulsions with various hydrophobic compounds, including hydrocarbons and vegetable and mineral oils. In terms of iron chelation capacity, the KO-EPS could sequester 41.9 % and 34.1 % of the most common iron states, Fe2+ and Fe3+, respectively. Moreover, KO-EPS exhibited an improvement in the viscosity of aqueous dispersion, being proportional to the increase in its concentration and presenting a non-Newtonian pseudoplastic flow behavior. KO-EPS also did not present a cytotoxic effect indicating that the KO-EPS could have potential applications as a natural thickener, bioemulsifier, and bioremediation agent.

Enhancement of biomass productivity and biochemical composition of alkaliphilic microalgae by mixotrophic cultivation using cheese whey for biofuel production

The growth of microalgae under alkaline conditions ensures an ample supply of CO2 from the atmosphere, with a low risk of crashing due to contamination and predators. The present study investigated the mixotrophic cultivation of two alkaliphilic microalgae (Tetradesmus obliquus and Cyanothece sp.) using cheese whey as an organic carbon source. The variation in cheese whey concentration (0.5-4.5% (v/v)), culture pH (7-11), and NaNO3 concentrations (0-2 gL-1) was evaluated using central composite design in response to biomass productivity and the contents of lipids, total proteins, and soluble carbohydrates. Both investigated microalgae effectively utilized cheese whey as an organic carbon source. The optimum conditions for simultaneously maximizing biomass and lipid productivity in T. obliquus were 3.5% (v/v) whey, pH 10.0, and 0.5 g L-1 NaNO3. Under these conditions, the biomass, lipid, soluble carbohydrate, and protein productivities were 48.69, 20.64, 7.02, and 10.97 mg L-1 day-1, respectively. Meanwhile, Cyanothece produced 52.78, 11.42, 4.31, and 7.89 mg L-1 day-1 of biomass, lipid, carbohydrate, and protein, respectively, at 4.5% (v/v) whey, pH 9.0, and 1.0 g L-1 NaNO3. The lipids produced under these conditions were rich in saturated fatty acids (FAs) and monounsaturated FAs, with no polyunsaturated FAs in both microalgae. Moreover, several biodiesel characteristics were estimated, and results fell within the ranges specified by international standards. These findings indicate that the mixotrophic cultivation of alkaliphilic microalgae could open new avenues for promoting microalgae productivity through low-cost biofuel production.

Genomic and functional evaluation of exopolysaccharide produced by Liquorilactobacillus mali t6-52: technological implications

BACKGROUND

This study explores the biosynthesis, characteristics, and functional properties of exopolysaccharide produced by the strain Liquorilactobacillus mali T6-52. The strain demonstrated significant EPS production with a non-ropy phenotype.

RESULTS

The genomic analysis unveiled genes associated with EPS biosynthesis, shedding light on the mechanism behind EPS production. These genes suggest a robust EPS production mechanism, providing insights into the strain's adaptability and ecological niche. Chemical composition analysis identified the EPS as a homopolysaccharide primarily composed of glucose, confirming its dextran nature. Furthermore, it demonstrated notable functional properties, including antioxidant activity, fat absorption capacity, and emulsifying activity. Moreover, the EPS displayed promising cryoprotective activities, showing notable performance comparable to standard cryoprotective agents. The EPS concentration also demonstrated significant freeze-drying protective effects, presenting it as a potential alternative cryoprotectant for bacterial storage.

CONCLUSIONS

The functional properties of L. mali T6-52 EPS reveal promising opportunities across various industrial domains. The strain's safety profile, antioxidant prowess, and exceptional cryoprotective and freeze-drying characteristics position it as an asset in food processing and pharmaceuticals.

Production, purification, and functional characterization of glucan exopolysaccharide produced by Enterococcus hirae strain OL616073 of fermented food origin

Microbial exopolysaccharides (EPS) are high molecular weight polymeric substances with great diversity and variety of applications in the food and pharma industry. In this study, we report the extraction of an EPS from Enterococcus hirae OL616073 strain originally isolated from Indian fermented food and its purification by ion exchange and size exclusion chromatography for physical-functional analyses. The EPS showed two prominent fractions (EPS F1 and EPS F2) with molecular mass 7.7 × 104 and 6.5 × 104 Da respectively by gel permeation chromatography. These fractions were further characterized by FTIR, HPTLC, GC-MS, and NMR as a homopolysaccharide of glucose linked with α-(1 → 6) and α-(1 → 3) glycosidic linkages. The porous, spongy, granular morphology of EPS was observed under scanning electron microscopy. EPS has revealed strong physico-functional properties like water solubility index (76.75 %), water contact angle (65.74°), water activity (0.35), hygroscopicity (3.05 %), water holding capacity (296.19 %), oil holding capacity (379.91 %), foaming capacity (19.58 %), and emulsifying activity (EA1-72.22 %). Rheological analysis showed that aqueous solution of EPS exhibited a non-Newtonian fluid behavior and shear-thinning characteristics. Overall, EPS exhibits techno functional properties with potential applications as a functional biopolymer in food and pharma industry.

Hormesis effects of phenol on growth and cellular metabolites of Chlorella sp. under different nutritional conditions using response surface methodology

The present study investigated the effects of different phenol concentrations (200 - 1000 mg L^-1) towards Chlorella sp. under different culture conditions (light vs. dark) and NaNO₃ concentrations (0 - 0.1 g L^-1) using central composite design. Phenol induced hormesis effects on the algal growth and cellular metabolites. Nitrate was identified as a crucial factor for promoting the uptake of phenol by Chlorella cells, while light was a limiting factor for growth, but the phyco-toxicity of phenol was decreased in the dark. The pigment contents were generally increased in the treated cells to protect against the oxidative phenol stress. The incorporation of 200 mg L^-1 phenol and 0.05 g L^-1 NaNO₃ to the illuminated cells markedly promoted biomass and lipid contents to 0.22 g L^-1 and 26.26% w/w, which was 44 and 112% higher than the phenol-less control, respectively. Under the same conditions, the increase of phenol concentration to 600 mg L^-1, the protein contents were increased to 18.59% w/w. Conversely, the algal cells were able to accumulate more than 60% w/w of soluble carbohydrates under dark conditions at 600 mg L^-1 of phenol. Nitrate replete conditions stimulated lipid accumulation at the expense of protein biosynthesis. Furthermore, most of the treatments showed an increase of H₂O₂ and malonaldehyde contents, especially for the illuminated cells. However, catalase activity tended to increase under dark conditions, especially at low phenol and nitrate concentrations. This study is valuable in indicating the effects of phenol on microalgae by exploiting response surface methodology, which can be applied as a powerful tool in growth monitoring and toxicity assessment.

Extraction of bioactive polysaccharide from Ulva prolifera biomass waste toward potential biomedical application

Ulva prolifera macroalgae blooming caused by water eutrophication seriously affects the marine ecological environment. Exploring an efficient approach to turning algae biomass waste into high-value-added products is significant. The present work aimed to demonstrate the feasibility of the bioactive polysaccharide extraction from Ulva prolifera and to evaluate its potential biomedical application. A short autoclave process was proposed and optimized using the response surface methodology to extract Ulva polysaccharides (UP) with high molar mass. Our results indicated that UP with high molar mass (9.17 × 10⁵ g/mol) and competitive radical scavenging activity (up to 53.4 %) could be effectively extracted with the assistance of Na₂CO₃ (1.3 %, wt.) at a solid-liquid ratio of 1/10 in 26 min. The obtained UP mainly composes of galactose (9.4 %), glucose (73.1 %), xylose (9.6 %), and mannose (4.7 %). The biocompatibility of the UP and its potential application as a bioactive ingredient in 3D cell culture has been evaluated and confirmed by confocal laser scanning microscopy and fluorescence microscope imaging inspection. This work demonstrated the feasibility of extracting bioactive sulfated polysaccharides with potential applications in biomedicine from biomass waste. Meanwhile, this work also provided an alternative solution to deal with the environmental challenges incurred by algae blooming worldwide.

Characterization of thermo/halo stable cellulase produced from halophilic Virgibacillus salarius BM-02 using non-pretreated biomass

The production of extremozymes from halophilic bacteria has increased significantly due to their stability and efficiency in catalyzing a reaction, as well as their capacity to display optimum activity at various salt concentrations. In the current study, the halophilic bacterium Virgibacillus salarius strain BM-02 could utilize many non-pretreated substrates including cellulose, corn stover, sugarcane bagasse and wheat bran as a sole carbon source. However, wheat bran was the best substrate for achieving optimum saccharification yield (90.1%). The partially purified cellulase was active and stable at a wide range of pH (5-8) with residual activities > 58%. Moreover, it was stable at 5-12% of NaCl. Metal ions have a variable impact on the activity of partially purified cellulase however, Fe⁺³ exhibited the highest increase in the cellulase activity. The enzyme exhibited a thermal stability at 40, 50 and 60 °C with half-lives of 1049.50, 168.14 and 163.5 min, respectively. The value of V_max was 22.27 U/mL while Km was 2.1 mM. The activation energy of denaturation E_d 69.81 kJ/mol, the enthalpy values (ΔH_d) were positive, and the entropy values (ΔS) were negative. Therefore, V. Salarius is recommended as a novel promising halophilic extremozyme producer and agricultural waste remover in the bio-industrial applications.

Colony formation of Phaeocystis globosa: A case study of evolutionary strategy for competitive adaptation

Some algae possess a multi-morphic life cycle, either in the form of free-living solitary cells or colonies which constantly occur in algal blooms. Though colony formation seems to consume extra energy and materials, many algae tend to outbreak in form of colonies. Here, we hypothesized that colony formation is a selected evolutionary strategy to improve population competitiveness and environmental adaptation. To test the hypothesis, different sizes of colonies and solitary cells in a natural bloom of Phaeocystis globosa were investigated. The large colony showed a relatively low oxidant stress level, a nutrient trap effect, and high nutrient use efficiency. The colonial nitrogen and phosphorus concentrations were about 5-10 times higher than solitary cell phycosphere and cellular nutrient allocation decreased with the enlargement of the colonial diameter following the economies of scale law. These features provide the colony with monopolistic competence and could function as an evolutionary strategy for competitive adaptation.

Characterization of Probiotic Pichia sp. DU2-Derived Exopolysaccharide with Oil-in-Water Emulsifying and Anti-biofilm Activities

Probiotic-derived exopolysaccharides are considered as promising sources of carbohydrate with extensive applications in many industries. In the current study, yeast strains were isolated from chicken ingluvies and gizzard samples. According to molecular identification, EPS-producing yeast (Pichia sp. DU2) showed the most similarity to Pichia cactophila (99.67%). Pichia sp. DU2 showed probiotic properties. EPS of Pichia sp. DU2 showed emulsifying activity. The formed emulsions showed 53% (colza oil) and 100% (p-xylene) stability after 24 h. These emulsions were oil-in-water and have stability in the presence of NaCl, KCl, and also acidic and basic conditions. Also, the EPS showed anti-biofilm (29.7-47.6% and 19.06-55.26% against B. cereus and Y. enterocolitica, respectively) and flocculating activities (31.4%). FT-IR showed the presence of various functional groups in EPS structure. Also, its heteropolysaccharide nature was revealed in ¹H-NMR and HPLC analysis. This emulsifying EPS showed significant thermal stability and negative zeta potential, which make it a promising carbohydrate for various industries. Finally, according to the predicted model, the maximal EPS production was achieved at reaction time 36 h, pH 6, yeast extract concentration 1.0%, and sucrose concentration 5%. Pichia sp. DU2 with probiotic properties and producing EPS with emulsifying, anti-biofilm, and flocculating activities can be considered as promising yeast strain in various industries like food and pharmaceutical industries.

Extraction, Structural Analysis, and Biofunctional Properties of Exopolysaccharide from Lactiplantibacillus pentosus B8 Isolated from Sichuan Pickle

Two novel exopolysaccharides, named LPB8-0 and LPB8-1, were isolated and purified from Lactiplantibacillus pentosus B8. Moreover, their structure and bioactivities were evaluated through chemical and spectral means. The study results demonstrated that LPB8-0 was primarily composed of mannose and glucose and had an average molecular weight of 1.12 × 10⁴ Da, while LPB8-1 was composed of mannose, glucose, and galactose and had an average molecular weight of 1.78 × 10⁵ Da. Their carbohydrate contents were 96.2% ± 1.0% and 99.1% ± 0.5%, respectively. The backbone of LPB8-1 was composed of (1→2)-linked α-D-Manp and (1→6)-linked α-D-Manp. LPB8-0 and LPB8-1 had semicrystalline structures with good thermal stability (308.3 and 311.7 °C, respectively). SEM results displayed that both LPB8-0 and LPB8-1 had irregular thin-slice shapes and spherical body structures. Additionally, an emulsifying ability assay confirmed that LPB8-0 and LPB8-1 had good emulsifying activity against several edible oils, and this activity was retained under acidic, neutral, and high temperature conditions. Furthermore, an antioxidant assay confirmed that LPB8-1 had stronger scavenging activity than LPB8-0. Overall, these results provide a theoretical basis for the potential application of these two novel exopolysaccharides as natural antioxidants and emulsifiers in the food and pharmaceutical industries.

Exopolysaccharide Produced by Pediococcus pentosaceus E8: Structure, Bio-Activities, and Its Potential Application

The novel exopolysaccharide EPS-E8, secreted by Pediococcus pentosaceus E8, was obtained by anion-exchange and gel filtration chromatography. Structural analyses identified EPS-E8 as a heteropolysaccharide containing mannose, glucose, and galactose. Its major backbone consists of →2)-α-D-Manp-(1→2,6)-α-D-Glcp-(1→6)-α-D-Manp-(1→, and its molecular weight is 5.02 × 10⁴ g/mol. Using atomic force microscopy and scanning electron microscopy, many spherical and irregular reticular-like shapes were observed in the microstructure of EPS-E8. EPS-E8 has outstanding thermal stability (305.7°C). Both the zeta potential absolute value and average particle diameter increased gradually with increasing concentration. Moreover, at a concentration of 10 mg/ml, the antioxidant capacities of, 1-Diphenyl-2-picrylhydrazyl (DPPH), ABTS and hydroxyl radical were 50.62 ± 0.5%, 52.17 ± 1.4%, and 58.91 ± 0.7%, respectively. EPS-E8 possesses excellent emulsifying properties against several food-grade oils, and its activity is retained under various conditions (temperature, pH, and ionic strength). Finally, we found that EPS-E8 as a polysaccharide-based coating could reduce the weight loss and malondialdehyde (MDA) content of strawberry, as well as preserving the vitamin C and soluble solid content during storage at 20°C. Together, the results support the potential application of EPS-E8 as an emulsifier, and a polysaccharide-based coating in fruit preservation.

Biosorption of ketoprofen and diclofenac by living cells of the green microalgae Chlorella sp

There is a growing interest for the removal of different pharmaceuticals from water owing to their toxicity to various organisms. The present study investigated the use of living cells of the green alga Chlorella sp. in the short-term adsorption of ketoprofen (KET) and diclofenac (DIF) from aqueous solutions. The bioremoval efficiency of both KET and DIF was highly dependent on various parameters such as time, pH, algal dosage, and drug concentration. The adsorption efficiencies of both KET and DIC were maximized at pH 6. The biosorption of KET was better described by pseudo-first-order kinetics, while DIC obeyed the pseudo-second-order model. The maximum adsorption capacities of KET and DIF were attained as 0.328 and 0.429 mg g^-1, respectively. The equilibrium data of the investigated drugs showed a better fit to the Freundlich model than the Langmuir model. The Elovich and Temkin models indicated that the algal surface was heterogeneous with different binding energies, while the intraparticle diffusion model assumed a boundary layer effect. Additionally, the Dubinin-Radushkevich isotherm indicated that the adsorption process was predominantly physisorption. FT-IR analysis revealed that H-bonding and n-π interactions were prominent in the biosorption process of the investigated pharmaceuticals on the surface of microalgae. The results of the present study showed that microalgae living cells could be applied as an eco-friendly and cost-effective biosorbent for the removal of KET and DIF at low concentrations.

Gibberellic acids promote growth and exopolysaccharide production in Tetraselmis suecica under reciprocal nitrogen concentration: an assessment on antioxidant properties and nutrient removal efficacy of immobilized iron-magnetic nanoparticles

The present study was aimed to assess the effect of gibberellic acids to enhance the growth, biomass, pigment, and exopolysaccharides production in Tetraselmis suecica under reciprocal nitrogen concentrations. For this study, the seven types of experimental media (N-P, NL-P/2GA3, N0-P/2GA3, NL-P/4GA3, N0-P/4GA3, NL-P/6GA3, and N0-P/6GA3) were prepared with the addition of gibberellic acids under various nitrogen concentrations. The experiment lasted for 15 days and the cell density, biomass, chlorophyll 'a', and exopolysaccharides (EPS) concentration of T. suecica were estimated for every 3 days. Then the EPS was subjected to the analyses of chemical (carbohydrate, protein, sulfate, and uronic acid), and antioxidant activity. In addition, nutrient removal efficiency was evaluated using different concentration of EPS. The highest DPPH (2,2-diphenyl-1-picrylhydrazyl) (86.7 ± 0.95%) and hydroxyl radical activity (85.7 ± 2.48%) were observed at the EPS concentrations 2.5 and 1.2 mg/mL, respectively. The immobilized magnetic Fe3O4-EPS (ferric oxide-exopolysaccharides) nanoparticles (5.0 and 10.0 g/L) have efficiently removed the excessive phosphate (89.5 ± 1.65%) and nitrate (73.5 ± 1.72%) from the Litopenaeus vannamei cultured wastewater. Thus, the application of gibberellic acids combined with limited nitrogen concentration could produce higher EPS that could exhibit excellent antioxidant activity, and nutrient removal efficacy in the form of Fe3O4-EPS magnetic nanoparticles.

Optimization of Exopolysaccharide (EPS) Production by Rhodotorula mucilaginosa sp. GUMS16

Exopolysaccharides (EPSs) are important biopolymers with diverse applications such as gelling compounds in food and cosmetic industries and as bio-flocculants in pollution remediation and bioplastics production. This research focuses on enhancing crude EPS production from Rhodotorula mucilaginosa sp. GUMS16 using the central composite design method in which five levels of process variables of sucrose, pH, and ammonium sulfate were investigated with sucrose and ammonium sulfate serving as carbon and nitrogen sources during microbial incubation. The optimal crude EPS production of 13.48 g/100 mL was achieved at 1 g/100 mL of sucrose concentration, 14.73 g/100 mL of ammonium sulfate at pH 5. Variations in ammonium sulfate concentrations (1.27–14.73 g/100 mL) presented the most significant effects on the crude EPS yield, while changes in sucrose concentrations (1–5 g/100 mL) constituted the least important process variable influencing the EPS yield. The Rhodotorula mucilaginosa sp. GUMS16 may have the potential for large-scale production of EPS for food and biomedical applications.

Antioxidant and Immunomodulatory Properties of Partially purified Exopolysaccharide from Lactobacillus Casei Isolated from Chinese Northeast Sauerkraut

Background: Exopolysaccharides (EPS) from Lactobacillus spp. have been found to have biological activities. Our previous work demonstrated the antibiofilm activity of EPS from Lactobacillus casei NA-2 (L.casei NA-2) isolated from northeast Chinese sauerkraut (Suan Cai). The present study has focussed on the antioxidant and immunomodulatory activities of the EPS in vitro.Methods: Antioxidant properties of the EPS were evaluated by the radical-scavenging activities in vitro. The immunomodulatory effects of EPS were assayed by measuring nitric oxide (NO), interleukin 6 (IL-6), tumor necrosis factor-alpha (TNF-α), and reactive oxygen species (ROS) in RAW 264.7 macrophages, and the mechanism was investigated through NF-κB and JNK.Result: EPS contains 88% total sugar, with the molecular weights (Mw) of 1.3 × 10⁶ Da, 6.4 × 10⁵ Da, 2.0 × 10⁵ Da, and 1.4 × 10⁴ Da. EPS showed antioxidant activity by scavenging hydroxyl radicals (42% at 1.2 mg/mL), superoxide radicals (76% at 100 µg/mL), and DPPH (80% at 10 mg/mL); and did not affect the proliferation of unstimulated or lipopolysaccharide (LPS)-induced RAW 264.7 cells at the concentrations ranging from 31.25 to 500 µg/mL. Results showed EPS promoted the production of ROS and TNF-α involved in NF-κB p65 and JNK signaling pathways in unstimulated RAW 264.7 cells. On the other hand, the levels of NO and iNOS were reduced after EPS treatment in LPS-induced RAW 264.7 cells.Conclusion: Our results showed the protective effect against oxidative damage and potential immunomodulatory and anti-inflammatory properties of EPS from Lactobacillus casei NA-2.

A novel exopolysaccharide produced by Lactobacillus coryniformis NA-3 exhibits antioxidant and biofilm-inhibiting properties in vitro

Background

Exopolysaccharides (EPSs) secreted from lactic acid bacteria are carbohydrate polymers with reported biological activities. In this study, we extracted and characterized the composition as well as antioxidant and biofilm-inhibitory properties of EPS from Lactobacillus coryniformis NA-3 isolated from northeast Chinese sauerkraut (Suan Cai).

Methods

Lactobacillus coryniformis NA-3 was identified with 16S rDNA amplification and Neighbor Joining (NJ) phylogenetic analysis. EPS derived from Lactobacillus coryniformis NA-3 (EPS-NA3) was analyzed, including compositions by high-performance liquid chromatography (HPLC), functional groups by Fourier-transform infrared spectroscopy (FT-IR) and glycosidic bond configuration by Hydrogen-1 Nuclear Magnetic Resonance (¹H NMR). Antioxidant activity of EPS was evaluated with hydroxyl and superoxide radical-scavenging. Anti-biofilm activities of EPS-NA3 were checked through inhibition and dispersion.

Results

The monosaccharide composition of EPS included α-rhamnose, α-mannose, α-galactose, and α-glucose in a ratio of 2.6:1.0:5.0:3.3. The free radical-scavenging abilities of EPS-NA3 were 37.77% ± 1.56% and 78.87% ± 3.07% on hydroxyl and superoxide reactive oxygen species respectively. Moreover, EPS-NA3 attenuated the formation of Bacillus cereus and Salmonella typhimurium biofilms by inhibition ratios of approximately 80% and 40% respectively. Additionally, treatment with EPS-NA3 dispersed established biofilms of B. cereus and S. typhimurium by approximately 90% and 20% respectively.

Conclusion

These results suggest that EPS-NA3 may be developed as antioxidant and anti-biofilm agents for industrial and clinical applications due to its capacity of scavenging free radicals, inhibition of bacterial biofilm formation, and dispersion of established biofilms.