Investigation on Mecynorhina torquata Drury, 1782 (Coleoptera, Cetoniidae, Goliathini) cuticle: Surface properties, chitin and chitosan extraction

Extraction of chitin and chitosan from Hermetia illucens breeding waste: A greener approach for industrial application

Sustainably exploiting the waste of the black soldier fly (BSF) to produce chitin and chitosan remains a challenge. This work valorizes the pupal cases of BSF for chitin and chitosan extraction. Four chemical extraction processes have been employed. Process 1, the standard method for this source, served as a control. Processes 2 and 3 were designed to assess and select the most effective delipidation method, while the optimized Process 4 involved autoclave conditions (121 °C-2.2 Bar). All chitin derivatives obtained were characterized by FTIR, SEM, XRD, 1H NMR, TGA, potentiometry, viscosimetry, and ICP-OES. Extraction using Process 4 (P4) proved to be the most efficient, demonstrating a deproteinization efficiency of 94.25 ± 0.6 % in a total reaction time of 1.15 ± 0.08 h and water consumption of 250 ± 26.86 L/kg, significantly lower than in other processes. In terms of yield, this process resulted in chitin and chitosan with respective yields of 34.74 ± 1.15 % and 83.33 ± 1.28 %, outperforming the other methods. Regarding physicochemical properties, P4 produced chitin and chitosan with improved thermal stability, with DTGmax values of 421 °C and 345 °C respectively. Additionally, the crystallinity of chitin was reduced by 25.68 %. For chitosan, the degree of acetylation (DA) was the lowest, while maintaining a high molecular weight of 220,378 g.mol-1. These results confirm that P4 is efficient and environmentally friendly, making it well-suited for industrial applications.

Spectroscopic investigation, dielectric and antimicrobial properties of chitin-cellulose@ZnO/CuO conductive nanocomposites

In this research, we fabricated a functional conductive nanocomposite with valuable properties through a chitin (CH) and cellulose (CE) polymerization process, incorporating ZnO/(0.1, 0.2, 0.3 mol.%) CuO bioactive nanoparticles. These bioactive nanoparticles, synthesized through sol-gel and polymerization interactions, greatly enhanced the structural, dielectric, and antimicrobial characteristics of CH-CE@ZnO/CuO conductive nanocomposites. The morphological analysis revealed that these nanoparticles, with diameters ranging from 11-25 nm, formed covalent bonds with the membrane matrix, bolstering the conductive nanocomposites ' structural integrity and dielectric performance. The dielectric properties of the conductive nanocomposites were significantly enhanced by the even distribution of ZnO/CuO nanoparticles within the CH-CE composite. Additionally, antimicrobial assessments demonstrated that the CH-CE@ZnO/CuO conductive nanocomposites displayed significant antibacterial properties against the Escherichia coli and Staphylococcus aureus, showcasing their potential as active packaging materials for electronic, biosensors, and sustainable applications.

Investigation of 9 True Weevil (Curculionidae Latreille, 1802) Species for Chitin Extraction

Chitin, the second most abundant biopolymer after cellulose, is an important resource for biosourced materials. The global demand for chitin is rapidly increasing, however, the majority of industrial chitin is sourced from crustacean shells, which may be less accessible in regions without seafood waste. Therefore, it is crucial to explore alternative chitin sources, such as those derived from beetles and other arthropods. This study investigated chitin extraction from nine species of Curculionidae (true weevils), which are recognized as crop pests. The extraction process and yields were described, and the isolated chitin was characterized by SEM, IR spectroscopy, elemental analysis, XRD, and ash and water content measurements. This work highlights the potential of Curculionidae as an alternative chitin source.

Investigation on novel chitin and chitosan from dung beetle Heteronitis castelnaui (Harold, 1865) and its potential application for organic dyes removal from aqueous solution

Chitosan, a natural polysaccharide, has attracted considerable attention as an environmentally friendly and highly efficient adsorbent for dye removal. It is usually produced by deacetylation or partial deacetylation of chitin. However, conventional sources of chitin and chitosan are limited, prompting the need for alternative sources with improved adsorption capabilities. Herein, this study focuses on exploring a novel chitin and chitosan source derived from the dung beetle and evaluates its potential for organic dye removal from aqueous solutions. The research involves the extraction and characterization of chitin and chitosan from dung beetle Heteronitis castelnaui (Harold, 1865) using various analytical techniques, including SEM, FT-IR, TGA, XRD, NMR, deacetylation degree and elemental analysis. The chitosan obtained was used for the formation of hydrogels with sodium alginate via cross-linking with calcium chloride. And then the prepared hydrogels were evaluated for its adsorption capacity through batch adsorption experiments using methylene blue as a model pollutant. The adsorption capacity for methylene blue was 1294.3 mg/g at room temperature with solution pH = 12, MB concentration of 1800 mg/L. Furthermore, the kinetics of the adsorption process were analyzed using pseudo-first-order and pseudo-second-order models to understand the rate of adsorption. The maximum adsorption capacities were determined using Langmuir and Freundlich isotherm models. This study provides valuable insights for the development of sustainable dye adsorption technologies, specifically investigating a novel chitosan source derived from the dung beetle.

Update on Chitin and Chitosan from Insects: Sources, Production, Characterization, and Biomedical Applications

Insects, renowned for their abundant and renewable biomass, stand at the forefront of biomimicry-inspired research and offer promising alternatives for chitin and chitosan production considering mounting environmental concerns and the inherent limitations of conventional sources. This comprehensive review provides a meticulous exploration of the current state of insect-derived chitin and chitosan, focusing on their sources, production methods, characterization, physical and chemical properties, and emerging biomedical applications. Abundant insect sources of chitin and chitosan, from the Lepidoptera, Coleoptera, Orthoptera, Hymenoptera, Diptera, Hemiptera, Dictyoptera, Odonata, and Ephemeroptera orders, were comprehensively summarized. A variety of characterization techniques, including spectroscopy, chromatography, and microscopy, were used to reveal their physical and chemical properties like molecular weight, degree of deacetylation, and crystallinity, laying a solid foundation for their wide application, especially for the biomimetic design process. The examination of insect-derived chitin and chitosan extends into a wide realm of biomedical applications, highlighting their unique advantages in wound healing, tissue engineering, drug delivery, and antimicrobial therapies. Their intrinsic biocompatibility and antimicrobial properties position them as promising candidates for innovative solutions in diverse medical interventions.

Sustainable valorization approaches on crustacean wastes for the extraction of chitin, bioactive compounds and their applications - A review

The unscientific disposal of the most abundant crustacean wastes, especially those derived from marine sources, affects both the economy and the environment. Strategic waste collection and management is the need of the hour. Sustainable valorization approaches have played a crucial role in solving those issues as well as generating wealth from waste. The shellfishery wastes are rich in valuable bioactive compounds such as chitin, chitosan, minerals, carotenoids, lipids, and other amino acid derivatives. These value-added components possessed pleiotropic applications in different sectors viz., food, nutraceutical, cosmeceutical, agro-industrial, healthcare, and pharmaceutical sectors. The manuscript covers the recent status, scope of shellfishery management, and different bioactive compounds obtained from crustacean wastes. In addition, both sustainable and conventional routes of valorization approaches were discussed with their merits and demerits along with their combinations. The utilization of nano and microtechnology was also included in the discussion, as they have become prominent research areas in recent years. More importantly, the future perspectives of crustacean waste management and other potential valorization approaches that can be implemented on a large scale.

Investigation on Akis granulifera (Coleoptera, Sahlberg, 1823) as a potential source of chitin and chitosan: Extraction, characterization and hydrogel formation

The majority of studies have focused on the industrial exploitation of marine fisheries waste through the production of natural bioactive bioploymeres such as chitin and chitosan. However, in recent years, beetles are increasingly attracting the interest of scientists as a source of chitin and chitosan for the preparation of hydrogels for sustainable engineering development. In the present work, we focus on the study for the first time a new Moroccan species of beetle (Akis granulifera Sahlberg, 1823), for the extraction of chitin and the elaboration of chitosan. A chemical extraction process was used. Then, physicochemical characterizations by FT-IR, SEM, XRD, 1H NMR, TGA/DSC, Potentiometry, Viscosimetry, and elemental analysis were performed. In addition, to evaluate its physicochemical quality, the elaborated chitosan is combined with alginate to form a hydrogel. This hydrogel was effectively characterized by SEM, DRX and FTIR to show the potential of chitosan from Akis granulifera in biomaterial applications.

A New Mediterranean Flour Moth-Derived Chitosan: Characterization and Co-electrospun Hybrid Fabrication

In this study, the chitin of adult Mediterranean flour moth (Ephestia kuheniella) (Cht) was extracted and then converted to chitosan by deacetylation process to achieve the chitosan derived from E. kuheniella (Chs_fm). The new chitosan-based scaffold was produced using the polyvinyl alcohol (PVA) co-electrospinning technique. The degree of deacetylation was obtained using the distillation-titration and Fourier transform infrared spectroscopy. The surface morphology and crystallinity index of Chs_fm were observed using scanning electron microscopy and X-ray diffraction analysis, respectively, and compared with the commercial chitosan (Chs_c). Thermogravimetric analysis was used to estimate two chitosans' water content and thermal stability. The average molecular mass analysis was performed using viscometry. Moreover, the minimum inhibitory concentration and DPPH assay were used to study the antimicrobial activity and antioxidant potential of the Chs_fm, respectively. Accordingly, Chs_fm was smoother with fewer pores and flakes than Chs_c, and its crystallinity index was higher than Chs_c. The water content and thermal stability were lower and similar for Chs_fm compared to Chs_c. The average molecular mass of Chs_fm was ~ 5.8 kDa, making it classified as low molecular weight chitosan. The antimicrobial activity of Chs_fm against a representative Gram-negative bacteria; E. coli resulted to be the same as Chs_c. However, less effective than Chs_c against a representative Gram-positive bacteria is S. aureus. The Chs_fm/PVA ratio scaffold was optimized at 30:70 to fabricate a uniform nanofiber scaffold.

Investigation on dung beetle's (Heliocopris Hope, 1838) chitosan valorisation for hydrogel 3D printing

Biopolymers and their derivatives are materials with increasing interest for industry and especially for sustainable engineering development. Among such kind of materials, carbohydrate polymer like highly deacetylated chitin (chitosan) is widely used for a wide range of applications, including material and biomedical developments. The majority of industrially produced chitosan is based on chitin extracted from crustacean exoskeleton. However, with increase of interest on this material, chitosan's production will rapidly become insufficient and other species should be investigated as new sources of chitosan. In the present work, we focus on the preparation of chitosan from giant dung beetles (Genus Heliocopris, Hope, 1838). This genus was chosen to show the possibility to take animals that develop and leave near dejection and valuate them for material applications. This work includes all the chitosan extraction procedures, chitosan characterisation IR, SEM, NMR, ash content, and deacetylation degree. Finally, the prepared carbohydrate polymer is used to form hydrogel. The prepared gel has been characterised and used for 3D printing, to show the compatibility of extracted chitosan with biomaterial application.

Antimicrobial Activity of Chemically and Biologically Treated Chitosan Prepared from Black Soldier Fly (Hermetia illucens) Pupal Shell Waste

Globally, the broad-spectrum antimicrobial activity of chitin and chitosan has been widely documented. However, very little research attention has focused on chitin and chitosan extracted from black soldier fly pupal exuviae, which are abundantly present as byproducts from insect-farming enterprises. This study presents the first comparative analysis of chemical and biological extraction of chitin and chitosan from BSF pupal exuviae. The antibacterial activity of chitosan was also evaluated. For chemical extraction, demineralization and deproteinization were carried out using 1 M hydrochloric acid at 100 °C for 2 h and 1 M NaOH for 4 h at 100 °C, respectively. Biological chitin extraction was carried out by protease-producing bacteria and lactic-acid-producing bacteria for protein and mineral removal, respectively. The extracted chitin was converted to chitosan via deacetylation using 40% NaOH for 8 h at 100 °C. Chitin characterization was done using FTIR spectroscopy, while the antimicrobial properties were determined using the disc diffusion method. Chemical and biological extraction gave a chitin yield of 10.18% and 11.85%, respectively. A maximum chitosan yield of 6.58% was achieved via chemical treatment. From the FTIR results, biological and chemical chitin showed characteristic chitin peaks at 1650 and 1550 cm⁻¹—wavenumbers corresponding to amide I stretching and amide II bending, respectively. There was significant growth inhibition for Escherichia coli, Bacillus subtilis,Pseudomonas aeruginosa,Staphylococcus aureus, and Candida albicans when subjected to 2.5 and 5% concentrations of chitosan. Our findings demonstrate that chitosan from BSF pupal exuviae could be a promising and novel therapeutic agent for drug development against resistant strains of bacteria.