Janus hybrid sustainable all-cellulose nanofiber sponge for oil-water separation

Anisotropic materials based on carbohydrate polymers: A review of fabrication strategies, properties, and applications

Anisotropic structures exist in almost all living organisms to endow them with superior properties and physiological functionalities. However, conventional artificial materials possess unordered isotropic structures, resulting in limited functions and applications. The development of anisotropic structures on carbohydrates is reported to have an impact on their properties and applications. In this review, various alignment strategies for carbohydrates (i.e., cellulose, chitin and alginate) from bottom-up to top-down strategies are discussed, including the rapidly developed innovative technologies such as shear-induced orientation through extrusion-based 3D/4D printing, magnetic-assisted alignment, and electric-induced alignment. The unique properties and wide applications of anisotropic carbohydrate materials across different fields, from biomedical, biosensors, smart actuators, soft conductive materials, to thermal management are also summarized. Finally, recommendations on the selection of fabrication strategies are given. The major challenge lies in the construction of long-range hierarchical alignment with high orientation degree and precise control over complicated architectures. With the future development of hierarchical alignment strategies, alignment control techniques, and alignment mechanism elucidation, the potential of anisotropic carbohydrate materials for scalable manufacture and clinical applications will be fully realized.

Recent advances in hydrophobic nanocellulose aerogels for oil spill applications: A review

In a rapidly growing world, petroleum is used extensively in various industries, and the extraction, processing, and transportation of petroleum generates large amounts of petroleum-containing wastewater. Conventional oil/water separation methodologies are often ineffective and costly. Nanocellulose-based aerogels (NA) have emerged as a possible solution to this problem. However, hydrophobic modification is required for effective use in oil/water separation. This review on materials commonly used in these processes and outlines the requirements for adsorbent materials and methods for creating unique lipophilic surfaces. New trends in hydrophobization methods for NA are also discussed. Additionally, it includes the development of composite nanocellulose aerogels (CNAs) and cellulose based membrane specially developed for oil/water (o/w) separation considering different separation requirements. This analysis also examines how CNAs have evolved by introducing special properties that facilitate oil collection or make the adsorbent recyclable. We also discuss the difficulties in creating effective NAs for these important applications in a changing society, as well as the difficulties in creating oil recovery equipment for oil spill cleanup.

The Design of PAN-Based Janus Membrane with Adjustable Asymmetric Wettability in Wastewater Purification

In this paper, an environmentally friendly polyacrylonitrile-based (PAN-based) composite membrane with a Janus structure for wastewater treatment was successfully fabricated. To achieve the optimum adsorption of PAN-based Janus composite membrane, the asymmetric wettability was regulated through electrospinning, resulting in TiO2 modifying PAN as the hydrophilic substrate layer, and PCL gaining a different thickness as the hydrophobic layer. The prepared Janus composite membrane (PAN/TiO2-PCL20) showed excellent oil/water separation performance for diverse surfactant-stabilized oil-in-water emulsions. For n-hexane-in-water emulsion, the permeate flux and separation efficiency reached 1344 L m-2 h-1 and 99.52%, respectively. Even after 20 cycles of separation, it still had outstanding reusability and the separation efficiency remained above 99.15%. Meanwhile, the PAN/TiO2-PCL20 also exhibited an excellent photocatalytic activity, and the removal rate for RhB reached 93.2%. In addition, the research revealed that PAN/TiO2-PCL20 possessed good mechanical property and unidirectional water transfer capability. All results indicated that PAN/TiO2-PCL20 with photocatalysis and oil/water separation performance could be used for practical complex wastewater purification.

Bio-Based Aerogels for the Removal of Heavy Metal Ions and Oils from Water: Novel Solutions for Environmental Remediation

Contamination of the aqueous environment caused by the presence of heavy metal ions and oils is a growing concern that must be addressed to reduce their detrimental impact on living organisms and safeguard the environment. Recent efficient and environmentally friendly remediation methods for the treatment of water are based on third-generation bioaerogels as emerging applications for the removal of heavy metal ions and oils from aqueous systems. The peculiarities of these materials are various, considering their high specific surface area and low density, together with a highly porous three-dimensional structure and tunable surface chemistry. This review illustrates the recent progress in aerogels developed from cellulose and chitosan as emerging materials in water treatment. The potential of aerogel-based adsorbents for wastewater treatment is reported in terms of adsorption efficacy and reusability. Despite various gaps affecting the manufacturing and production costs of aerogels that actually limit their successful implementation in the market, the research progress suggests that bio-based aerogels are ready to be used in water-treatment applications in the near future.

Light-Propelled Super-Hydrophobic Sponge Motor and its Application in Oil-Water Separation

Self-propelled separation materials, that is, motor, are one of the keys to realizing smart oil-water separation. Although three-dimensional sponges such as commercial melamine sponge (MS) exhibit excellent oil-water separation ability, they cannot move by themselves on water. Aiming at solving this problem, a polydimethylsiloxane (PDMS) and molybdenum disulfide (MoS2) modified MS motor (PDMS@MS/MoS2) with an asymmetric multilayer structure was prepared, in which the photothermal layer MoS2 provided the propelling force for the motor under infrared light irradiation, and the middle layer PDMS was used as the superhydrophobic modified agent and adhesive agent between commercial MS and MoS2 powder. PDMS coated MS (PDMS@MS) as the superhydrophobic layer showed good superhydrophobic ability (153.1°) and oil-water separation capacity (52.33 g/g to liquid paraffin). Furthermore, the introduction of MoS2 made the speed of the sponge motor reach 8.27 mm s-1 with a removal quantity of 12.20 g/g for cyclohexane. After recycling 8 times, the contact angle, cyclohexane capturing amount, and average velocity of the motor were 150.3°, 11.40 g/g, and 8.41 mm/s, respectively. Meanwhile, PDMS@MS/MoS2 kept a similar light-propelling velocity (∼8 mm) at different pH values and in simulated seawater, demonstrating that the light-propelling motor possessed a good cycle and practical performance, which provides a possibility for the directional light propulsion of a sponge motor in oil-water separation.

A green and facile one-step hydration method based on ZIF-8-PDA to prepare melamine composite sponges with excellent hydrophobicity for oil-water separation

Frequent crude oil spills and illegal discharges of industrial organic pollutants cause serious damage to the ecological environment and considerable loss of valuable resources. Therefore, there is an urgent need to develop efficient strategies to separate and recover oils or reagents from sewage. Herein, a green, facile and rapid one-step hydration method was applied to obtain the composite sponge (ZIF-8-PDA@MS) that monodispersed zeolitic imidazolate framework-8 nanoparticles with high porosity and large specific surface area were firmly loaded onto the melamine sponge by ligand exchange and the self-assembly of dopamine. The water contact angle of ZIF-8-PDA@MS with multiscale hierarchical porous structure could reach 162°, which remained stable over a long period of time and a wide pH range. ZIF-8-PDA@MS displayed excellent adsorption capacities (up to 85.45-168.95 g⋅g^-1), and could be reused at least 40 times. Besides, ZIF-8-PDA@MS exhibited remarkable photothermal effect. Simultaneously, Silver nanoparticle-immobilized composite sponges were also prepared via in-situ reduction of silver ions to inhibit bacterial contamination. The composite sponge developed in this work can be used not only for the treatment of industrial sewage, but also for the emergency response of large-scale marine oil spill accidents, which has inestimable practical value for water decontamination.

Recent developments in the application of membrane separation technology and its challenges in oil-water separation: A review

In the development and production process of domestic and foreign oil fields, large amounts of oil-bearing wastewater with complex compositions containing toxic and harmful pollutants are generated. These oil-bearing wastewaters will cause serious environmental pollution if they are not effectively treated before discharge. Among these wastewaters, the oily sewage produced in the process of oilfield exploitation has the largest content of oil-water emulsion. In order to solve the problem of oil-water separation of oily sewage, the paper summarizes the research of many scholars in many aspects, such as the use of physical and chemical methods such as air flotation and flocculation, or the use of mechanical methods such as centrifuges and oil booms for sewage treatment. Comprehensive analysis shows that among these oil-water separation methods, membrane separation technology has higher separation efficiency in the separation of general oil-water emulsions than other methods and also exhibits a better separation effect for stable emulsions, which has a broader application prospect for future developments. To present the characteristics of different types of membranes more intuitively, this paper describes the applicable conditions and characteristics of various types of membranes in detail, summarizes the shortcomings of existing membrane separation technologies, and offers prospects for future research directions.

Advances in Asymmetric Wettable Janus Materials for Oil–Water Separation

The frequent occurrence of crude oil spills and the indiscriminate discharge of oily wastewater have caused serious environmental pollution. The existing separation methods have some defects and are not suitable for complex oil–water emulsions. Therefore, the efficient separation of complex oil–water emulsions has been of great interest to researchers. Asymmetric wettable Janus materials, which can efficiently separate complex oil–water emulsions, have attracted widespread attention. This comprehensive review systematically summarizes the research progress of asymmetric wettable Janus materials for oil–water separation in the last decade, and introduces, in detail, the preparation methods of them. Specifically, the latest research results of two-dimensional Janus materials, three-dimensional Janus materials, smart responsive Janus materials, and environmentally friendly Janus materials for oil–water separation are elaborated. Finally, ongoing challenges and outlook for the future research of asymmetric wettable Janus materials are presented.

Naturally Derived Janus Cellulose Nanomaterials: Anisotropic Cellulose Nanomaterial Building Blocks and Their Assembly into Asymmetric Structures

Naturally derived cellulose nanomaterials (CNMs) with desirable physicochemical properties have drawn tremendous attention for their versatile applications in a broad range of fields. More recently, Janus amphiphilic cellulose nanomaterial particles with asymmetric structures (i.e., reducing and nonreducing ends and crystalline and amorphous domains) have been in the spotlight, offering a rich and sophisticated toolbox for Janus nanomaterials. With careful surface and interfacial engineering, Janus CNM particles have demonstrated great potential as surface modifiers, emulsifiers, stabilizers, compatibilizers, and dispersants in emulsions, nanocomposites, and suspensions. Naturally derived Janus CNM particles offer a fascinating opportunity for scaling up the production of self-standing Janus CNM membranes. Nevertheless, most Janus CNM membranes to date are constructed by asymmetric fabrication or asymmetric modification without considering the Janus traits of CNM particles. More future research should focus on the self-assembly of Janus CNM particles into bulk self-standing Janus CNM membranes to enable more straightforward and sustainable approaches for Janus membranes. This review explores the fabrication, structure-property relationship, and Janus configuration mechanisms of Janus CNM particles and membranes. Janus CNM membranes are highlighted for their versatile applications in liquid, thermal, and light management. This review also highlights the significant advances and future perspectives in the construction and application of sustainable Janus CNM particles and membranes.

Fabrication of Janus-type nanocomposites from cellulose nanocrystals for self-healing hydrogels' flexible sensors

Janus bio-nanomaterials have great application potential in functional solid surfactants, probes and flexible sensors. In this manuscript, the sustainable Janus cellulose nanocrystals-type (CNCs-type) nanomaterials were prepared by Pickering emulsion template method. The asymmetric functionalism of Janus nanorods was realized by asymmetrically grafting polypyrrole (PPy) and polydopamine (PDA) onto different sides of CNCs (Janus CNCs-PPy /PDA (JCNs)). JCNs was successfully applied to self-healing nanocomposite hydrogels and further applied to the development of flexible sensors. The self-healing efficiency of nanocomposite hydrogels was 87.2%, and the stress and strain reached 3.50 MPa and 453.45%, respectively. It is worth noting that flexible sensors have been widely used in the field of wearable electronic sensing for real-time monitoring of human movement due to their high sensitivity (gauge factor (GF) = 9.9) and fast response time (260 ms).

Mechanically durable green aerogel composite based on agricultural lignocellulosic residue for organic liquids/oil sorption

Various oil spill cleanup sorbents have good hydrophobicity and oil separation efficiency, but their practical use has been limited due to the difficult and costly fabrication procedure. The research aims towards material development using the consumption of lignocellulosic agricultural residue for isolating cellulose nanofiber and its forward use to construct a 3D porous structure. A simple freeze-drying technique was used to assemble low-density porous structure. The biodegradable polylactic acid coating was used to alter the wettability from hydrophilic to hydrophobic and the maximum water contact angle value was around 120°. The prepared coated samples were testified for a series of oil/organic solvents-water mixtures. The sorption capacity was in the range of 28-70 g/g. The prepared aerogels were efficiently reused for at least 10 cycles. Developed material was used in continuous oil-water separation to remove oil from the water's surface. The cost analysis was estimated for scaleup production in the future.

A Review on Nanocellulose and Superhydrophobic Features for Advanced Water Treatment

Globally, developing countries require access to safe drinking water to support human health and facilitate long-term sustainable development, in which waste management and control are critical tasks. As the most plentiful, renewable biopolymer on earth, cellulose has significant utility in the delivery of potable water for human consumption. Herein, recent developments in the application of nanoscale cellulose and cellulose derivatives for water treatment are reviewed, with reference to the properties and structure of the material. The potential application of nanocellulose as a primary component for water treatment is linked to its high aspect ratio, high surface area, and the high number of hydroxyl groups available for molecular interaction with heavy metals, dyes, oil-water separation, and other chemical impurities. The ability of superhydrophobic nanocellulose-based textiles as functional fabrics is particularly acknowledged as designed structures for advanced water treatment systems. This review covers the adsorption of heavy metals and chemical impurities like dyes, oil-water separation, as well as nanocellulose and nanostructured derivative membranes, and superhydrophobic coatings, suitable for adsorbing chemical and biological pollutants, including microorganisms.

Potential use of Janus structures in food applications

Janus surfaces present technological opportunities both for research and industry in which different chemical, physical and/or structural components need to coexist for a single purpose such as chemistry, textile and material science. Varying inorganic and organic (polymer-based) materials are conventionally used however, utilizing nature-derived polymers to fabricate Janus structures is a recent and attractive trend which makes them more applicable for bio-based treatments with environmental concerns. Particularly, promising applications of Janus structures as being surfactants, drug delivery and micro/nano encapsulation vehicles for biomedical purposes successfully forward the interest on Janus concept to the food related practices. Producing Janus structures from nature-derived and food grade polymers such as alginate, cellulose, chitosan, lipid nanocrystals, zein and some plant-proteins and their usage stronger emulsions with higher stabilities, biosensing or antimicrobial practices as well as bioactive delivery and release control might be considered as a new era for food processing industry.