Fabricating lignin-based carbon nanofibers as versatile supercapacitors from food wastes

Progress, Challenges and Prospects of Biomass-Derived Lightweight Carbon-Based Microwave-Absorbing Materials

The widespread use of electronic devices in daily life, industry and military has led to a large amount of electromagnetic pollution, which has become an increasingly serious security issue. To eliminate or mitigate such risks and hazards, various advanced microwave absorption technologies and materials have been reported. As a new type of microwave absorber, biomass-derived carbon-based materials have received extensive attention. They have the characteristics of low cost, easy preparation, high porosity and environmental friendliness while retaining the advantageous adjustable dielectric properties, high conductivity and good stability of traditional carbon materials. The development of biomass microwave-absorbing materials not only provides a new idea for solving electromagnetic radiation but also helps to create an environmentally friendly and harmonious environment. Herein, various biomass-derived carbon-based microwave-absorbing materials (MAMs) including plant shells, plant fibers and other potential biomass materials are generalized and discussed including their preparation technology, microstructure design and so on. The two critical factors affecting microwave absorption properties, impedance matching and attenuation characteristics, are analyzed in detail. Finally, the confronting challenges and future development prospects of biomass-based microwave-absorbing materials are pointed out.

Research progress in the preparation of lignin-based carbon nanofibers for supercapacitors using electrospinning technology: A review

With the development of renewable energy technologies, the demand for efficient energy storage systems is growing. Supercapacitors have attracted considerable attention as efficient electrical energy storage devices because of their excellent power density, fast charging and discharging capabilities, and long cycle life. Carbon nanofibers are widely used as electrode materials in supercapacitors because of their excellent mechanical properties, electrical conductivity, and light weight. Although environmental factors are increasingly driving the application of circular economy concepts in materials science, lignin is an underutilized but promising environmentally benign electrode material for supercapacitors. Lignin-based carbon nanofibers are ideal for preparing high-performance supercapacitor electrode materials owing to their unique chemical stability, abundance, and environmental friendliness. Electrospinning is a well-known technique for producing large quantities of uniform lignin-based nanofibers, and is the simplest method for the large-scale production of lignin-based carbon nanofibers with specific diameters. This paper reviews the latest research progress in the preparation of lignin-based carbon nanofibers using the electrospinning technology, discusses the prospects of their application in supercapacitors, and analyzes the current challenges and future development directions. This is expected to have an enlightening effect on subsequent research.

Nitrogen-doped lignin-derived electrode materials for supercapacitors were prepared using the domain-limited effect

Supercapacitors, pivotal in mitigating the energy crisis stemming from dwindling fossil fuel reservoirs, necessitate meticulous consideration of electrode material preparation. While lignin-derived carbon materials sourced sustainably exhibit commendable potential as electrode materials, their intrinsic low capacitance limits widespread utilization. Herein, nitrogen atom doping of lignin (CNL) was accomplished employing a chemical modification technique employing cyanuric chloride as a dopant. The resultant nitrogen content measured at 2.85 %. Subsequent to CNL carbonation, the generated C3N4 was selectively confined to the internal surface of the CNLMS-800 through a domain-limited activation method, thereby rendering it suitable for deployment as a supercapacitor electrode material. CNLMS-800 manifests a substantial specific surface area of 1778.0 m2 g-1 and a concomitantly diminutive pore size of 2.6 nm. Noteworthy, the specific capacitance of CNLMS-800 attains 473.0 F g-1 at a current density of 0.5 A g-1 in a 6 M KOH electrolyte. The resultant energy density reaches 39.0 Wh kg-1 at a power density of 338.0 W kg-1. Crucially, even after 20,000 charge/discharge cycles at a current density of 10 A g-1, the capacitance retention attains an impressive 87.5 % in the KOH electrolyte. This innovative utilization of sustainable resources for electrode fabrication epitomizes a seminal advancement in the field of energy technology.

Preparation and characterization of bifunctional wolfsbane-like magnetic Fe3O4 nanoparticles-decorated lignin-based carbon nanofibers composites for electromagnetic wave absorption and electrochemical energy storage

Recently, with the pursuit of high-efficiency electromagnetic wave absorption (EMWA) and electrochemical energy storage (EES) materials, multifunctional lignin-based composites have attracted significant interest due to their low cost, vast availability, and sustainability. In this work, lignin-based carbon nanofibers (LCNFs) was first prepared by electrospinning, pre-oxidation and carbonization processes. Then, different content of magnetic Fe3O4 nanoparticles were deposited on the surface of LCNFs via the facile hydrothermal way to produce a series of bifunctional wolfsbane-like LCNFs/Fe3O4 composites. Among them, the synthesized optimal sample (using 12 mmol of FeCl3·6H2O named as LCNFs/Fe3O4-2) displayed excellent EMWA ability. When the minimum reflection loss (RL) value achieved -44.98 dB at 6.01 GHz with an thickness of 1.5 mm, and the effective absorption bandwidth (EAB) was up to 4.19 GHz ranging from 5.10 to 7.21 GHz. For supercapacitor electrode, the highest specific capacitance of LCNFs/Fe3O4-2 reached 538.7 F/g at the current density of 1 A/g, and the capacitance retention remained at 80.3 %. Moreover, an electric double layer capacitor of LCNFs/Fe3O4-2//LCNFs/Fe3O4-2 also showed a remarkable power density of 7755.29 W/kg, outstanding energy density of 36.62 Wh/kg and high cycle stability (96.89 % after 5000 cycles). In short, the construction of this multifunctional lignin-based composites has potential applications in electromagnetic wave (EMW) absorbers and supercapacitor electrodes.

N-S co-doping lignin-based carbon magnetic nanoparticles as high performance supercapacitor and electromagnetic wave absorber

Recently, multifunctional lignin-based materials are gaining more and more attention due to their great potential for low-cost and sustainability. In this work, to obtain both an excellent supercapacitor electrode and an outstanding electromagnetic wave (EMW) absorber, a series of multifunctional nitrogen-sulphur (N-S) co-doped lignin-based carbon magnetic nanoparticles (LCMNPs) had been successfully prepared through Mannich reaction at different carbonization temperature. As compared with the directly carbonized lignin carbon (LC), LCMNPs had more nano-size structure and higher specific surface area. Meanwhile, with the increase of carbonization temperature, the graphitization of the LCMNPs could also be effectively improved. Therefore, LCMNPs-800 displayed the best performance advantages. For the electric double layer capacitor (EDLC), the optimal specific capacitance of LCMNPs-800 reached 154.2 F/g, and the capacitance retention after 5000 cycles was as high as 98.14 %. When the power density was 2204.76 W/kg, the energy density achieved 33.81 Wh/kg. In addition, N-S co-doped LCMNPs also exhibited strong electromagnetic wave absorption (EMWA) ability, whose the minimum reflection loss (RL) value of LCMNPs-800 was realized -46.61 dB at 6.01 GHz with an thickness of 4.0 mm, and the effective absorption bandwidth (EAB) was up to 2.11 GHz ranging from 5.10 to 7.21 GHz, which could cover the C-band. Overall, this green and sustainable approach is a promising strategy for the preparation of high-performance multifunctional lignin-based materials.

Designed synthesis of multifunctional lignin-based adsorbent for efficient heavy metal ions removal and electromagnetic wave absorption

Multifunctional lignin-based adsorbents, which have shown great application prospect, have attracted widespread attention. Herein, a series of multifunctional lignin-based magnetic recyclable adsorbents were prepared from carboxymethylated lignin (CL), which was rich in carboxyl group (-COOH). After optimizing the mass ratio of CL to Fe₃O₄, the prepared CL/Fe₃O₄ (3:1) adsorbent showed efficient adsorption capacities for heavy metal ions. The kinetic and isotherm nonlinear fitting studies revealed that the adsorption process followed the second-order kinetic and Langmuir models, and the maximum adsorption capacities (Q_max) of CL/Fe₃O₄ (3:1) magnetic recyclable adsorbent for Pb²⁺, Cu²⁺ and Ni²⁺ ions reached 189.85, 124.43 and 106.97 mg/g, respectively. Meanwhile, after 6 cycles, the adsorption capacities of CL/Fe₃O₄ (3:1) for Pb²⁺, Cu²⁺ and Ni²⁺ ions could keep at 87.4 %, 83.4 % and 82.3 %, respectively. In addition, CL/Fe₃O₄ (3:1) also exhibited excellent electromagnetic wave absorption (EMWA) performance with a reflection loss (RL) of -28.65 dB at 6.96 GHz under the thickness of 4.5 mm, and its effective absorption bandwidth (EAB) achieved 2.24 GHz (6.08-8.32 GHz). In short, the prepared multifunctional CL/Fe₃O₄ (3:1) magnetic recyclable adsorbent with outstanding adsorption capacity for heavy metal ions and superior EMWA capability opens a new avenue for the diversified utilization of lignin and lignin-based adsorbent.

Recent progress on production technologies of food waste-based biochar and its fabrication method as electrode materials in energy storage application

The abundance of food waste across the globe has called for the mitigation and reduction of these discarded wastes. Herein, the potential of biochar derived from food waste is unquestionable as it provides a sustainable way of utilizing the abundance of available biomass, as well as an effective way of preserving the ecosystem through the reduction of concerning environmental issues. This review focuses on the food waste-based biochar as advanced electrode materials in the energy storage devices. Efforts have been made to present and discuss the current exploration of the food waste utilization, along with the biochar production technologies through thermochemical conversion, including combustion, gasification, and pyrolysis method. Finding its limitation in literatures, discussion on the food waste-based biochar fabrication method as the electrode materials is elaborated, alongside the current food waste-based biochar that has been explored in the energy application thus far. Towards the end, the outlook and perspective on the further development of food waste-based biochar have been outlined.

Recovery of Lignins with Potent Antioxidant Properties from Shells of Edible Nuts by a Green Ball Milling/Deep Eutectic Solvent (DES)-Based Protocol

Lignins are phenolic polymers endowed with potent antioxidant properties that are finding increasing applications in a variety of fields. Consequently, there is a growing need for easily available and sustainable sources, as well as for green extraction methodologies of these compounds. Herein, a ball milling/deep eutectic solvent (DES)-based treatment is reported as an efficient strategy for the recovery of antioxidant lignins from the shells of edible nuts, namely chestnuts, hazelnuts, peanuts, pecan nuts, and pistachios. In particular, preliminarily ball-milled shells were treated with 1:2 mol/mol choline chloride:lactic acid at 120 °C for 24 h, and the extracted material was recovered in 19–27% w/w yields after precipitation by the addition of 0.01 M HCl. Extensive spectroscopic and chromatographic analysis allowed for confirmation that the main phenolic constituents present in the shell extracts were lignins, accompanied by small amounts (0.9% w/w) of ellagic acid, in the case of chestnut shells. The recovered samples exhibited very promising antioxidant properties, particularly in the 2,2-diphenyl-1-picrylhydrazyl (DPPH) assay (EC₅₀ values ranging from 0.03 to 0.19 mg/mL). These results open new perspectives for the valorization of nut shells as green sources of lignins for applications as antioxidants, e.g., in the biomedical, food, and/or cosmetic sector.

Sustainable lignin precursors for tailored porous carbon-based supercapacitor electrodes

Sustainable materials are attracting a lot of attention since they will be critical in the creation of the next generation of products and devices. In this study, hydrogels were effectively synthesized utilizing lignin, a non-valorised biopolymer from the paper industry. This study proposes a method based on utilizing lignin to create highly swollen hydrogels using poly(ethylene) glycol diglycidyl ether (PEGDGE) as a crosslinking agent. The influence of different crosslinker ratios on the structural and chemical properties of the resultant hydrogels was investigated. Pore size was observed to be lowered when the amount of crosslinker was increased. The inclusion of additional hydrophilic groups in the hydrogel network decreased the swelling capacity of the hydrogels as the crosslinking density increases. These precursor materials were carbonised and electrochemically tested for application as electrodes for supercapacitors with capacitance characterized as a function of crosslinker ratio.

Fabrication of uniform lignin nanoparticles with tunable size for potential wound healing application

The construction of lignin nanoparticles (LNPs) with both lignin properties and nanomaterial properties through controlling the morphologies and structures of lignin is one of the effective ways to realize its application in the field of biomedicine. Firstly, the morphology and chemical structure of LNPs were studied in detailed. The results showed that the chemical structural characteristics of LNPs had not changed significantly and its morphology was more regular shape and narrower size distribution (50-350 nm). Besides, LNPs also exhibited excellent water dispersion stability and high negative zeta potential. Subsequently, LNPs as wound dressings had good antioxidant property, excellent adsorption capacity of protein, outstanding bactericidal activity and remarkable biocompatibility, suggesting that LNPs did not interfere with cell proliferation during wound healing. Finally, the in vivo results of mouse wounds further illustrated that treatment of wounded skin wounds with LNPs enhanced its effective healing. After 15 days, as compared with the untreated control and original lignin (OL) groups, the wounds treated of LNPs was completely closed and granulation tissue formation was advanced. Overall, this study can be a good method for high-value applications of LNPs, and highlighting the advantages of using lignin as medical adjuvant nanomaterials to accelerate wound healing.