Physicochemical properties of lignin nanoparticles from softwood and their potential application in sustainable pre-harvest bagging as transparent UV-shielding films

Valorization of lignin biowaste into Schiff base copper(II) complex as a magnetically reusable electrocatalyst for hydrogen evolution reaction

This work describes a cost-effective and sustainable copper(II) complex as an electrocatalyst for the hydrogen-evolution reaction (HER) under alkaline and acid conditions. A magnetic lignin-supported tetrazole Schiff base copper(II) complex was incorporated into a carbon paste electrode (MLS@SchTet-Cu(II)/CPE) by a surface modification and cross-linking method. The catalytic HER of the MLS@SchTet-Cu(II)/CPE electrodes was analyzed by electrochemical techniques, including linear sweep voltammetry (LSV), electrochemical impedance spectroscopy (EIS), chronopotentiometry (CP), and cyclic voltammetry (CV). The effects of solution pH and complex amount in the paste electrode on HER performance were evaluated. The results demonstrated that the MLS@SchTet-Cu(II) nanocomposite exhibits good electrocatalytic activity in both acidic and basic media. In particular, in 0.5 M H2SO4, the modified CPE electrode with 2.5 % MLS@SchTet-Cu(II) demonstrated an overpotential of 581 mV at 10 mA cm-2 (η10) and a Tafel slope of 258 mV dec-1, surpassing the performance of both the bare and other modified CPEs. These findings highlight the potential of MLS@SchTet-Cu(II) as a promising candidate for sustainable HER catalysis.

Mechanical, morphological, thermal, and fire-retardant properties of sustainable chitosan-lignin based bioplastics

Lignin can function as a fire retardant for biocomposites because of its excellent thermal stability. This work evaluated the impact of integrating technical lignin into chitosan-based bioplastics to enhance their mechanical and thermal properties. The solvent-casting technique was employed for the preparation of chitosan-lignin bioplastics. The incorporation of lignin improved the antioxidant properties and mechanical strength of the bioplastic, and it functions as a UV-blocking agent, as evidenced by UV-shielding studies, which indicates a reduction in the transmittance of the chitosan-lignin bioplastic by approximately four fold. The incorporation of lignin washed 3× with HCl into the chitosan-based bioplastic increased the tensile strength of the material by 36.41 % and the elastic modulus by 56.04 %. The antioxidant activity of the chitosan-lignin-based bioplastic ranged from 75.80 % to 80.38 %, whereas that of neat chitosan was only 25.02 %. Thermal analysis revealed that incorporating lignin as an additive in a chitosan-based bioplastic improved the thermal stability and flame retardancy of the bioplastic. This is indicated by a higher limiting oxygen index (LOI) value ranging from 42 to 48 % for the chitosan-lignin bioplastics than for the control bioplastic (27 %), which has a UL-94 rating in the V-0 range. These findings support the fact that the antioxidant, strength, and fire-retardant performance of chitosan-based bioplastics could be enhanced by the addition of lignin.

Lignin reinforced eco-friendly and functional nanoarchitectonics materials with tailored interfacial barrier performance

Exploring innovative and sustainable routes for the production of biodegradable biomass-based materials is critical to promote a circular carbon economy and carbon neutrality goals. Fossil-based non-biodegradable plastic waste poses a nonnegligible threat to humans and the ecological environment, and biomass-based functional materials are becoming increasingly viable alternatives. Lignin, a naturally occurring macromolecular polymer, is green and renewable resource rich in aromatic rings, with biodegradability, biocompatibility, and excellent processability for eco-friendly composites. Moreover, versatile and high tunable lignins can be valorized into functional materials, which are crucial building blocks in the fabrication of biomass-derived composites. Lignin's unique chemical structure, solvent resistance, anti-aging, and anti-ultraviolet functional properties make it highly potential for the fabrication of sustainable biobased barrier materials. This review systematically summarizes the progress in the fabrication and application of lignin-based functional composites, with a particular focus on barrier materials. First, the structural diversity of lignins from different sources and fractionation methods, and the structural modification strategies of lignins are briefly introduced. Then, the multiple barrier performances of lignin-based composites are listed, and the fabrication methods of different composites based on the polymer matrix systems are elaborated. In terms of diverse applications, this review highlights the multifaceted barrier properties of lignin-based composites in oxygen barrier, water vapor barrier, ultraviolet barrier, flame retardant and antibacterial applications. These functional barrier materials are widely used in food/pharmaceutical packaging, agricultural protection, construction, etc., providing an excellent option for sustainable materials with high barrier performance requirements. Finally, the main challenges faced by lignin-based barrier materials and the future directions are proposed.

Enhanced physicochemical characteristics and biological activities of low-temperature ethylenediamine/urea pretreated lignin

Low-temperature ethylenediamine (EDA)/urea pretreatment had been demonstrated to be an efficient pretreatment method for enzymatic hydrolysis and bioethanol production. For high-value utilization of the third main components of lignocellulosic biomass, the physicochemical structure characteristics and biological activities of low-temperature EDA/urea pretreated lignin (EUL) were comprehensively investigated in the present study. The results demonstrated that the pretreatment process facilitated the depolymerization of lignin, resulting in notable reduction in molecular weight and polydispersity index from 2.32 to 1.42 kg/mol and 1.44 to 1.20, respectively. The EDA/urea pretreated lignin (EUL) exhibited enhanced ultraviolet absorption capacity and the most significant DPPH radical scavenging and inhibition of Staphylococcus aureus in comparison to the primary lignin (PL) and the NaOH pretreated lignin (NL). Enhanced physicochemical characteristics and biological activities of EUL make it more suitable to be developed as sunscreen ingredient or antioxidant and antimicrobial agent in food preservation and conservation.

Green preparation of reusable Pd@magnetic lignosulfonate nanocomposite for hydrogen evolution reaction in all pHs

In this study, palladium nanoparticles (Pd NPs) were successfully synthesized and supported on a cost-effective, eco-friendly magnetic lignosulfonate matrix using Hibiscus Rosasinensis L. leaf extract as a natural reducing and stabilizing agent (Pd@Fe₃O₄-lignosulfonate). The magnetic lignosulfonate prevented the aggregation of Pd NPs, enhanced the active surface area, and improved the hydrophilicity of the modified carbon paste electrode (CPE), thus boosting hydrogen production efficiency. The Pd@Fe₃O₄-lignosulfonate was incorporated into the CPE at different weight percentages (1.5, 2.5, 5, 10, and 15 %), and employed as an efficient electrocatalyst for the hydrogen evolution reaction (HER) across all pH conditions (0.5 M H₂SO₄, 1 M NaOH, and phosphate buffer at pH 7). Electrochemical techniques such as linear sweep voltammetry (LSV), cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), chronoamperometry (CA), and chronopotentiometry (CP) were employed to assess the catalyst's performance. Optimal hydrogen generation was achieved at 10 wt% Pd@Fe₃O₄-lignosulfonate/CPE, yielding an overpotential of -239 mV (vs. RHE) at a current density of 10 mA. cm-2 and a Tafel slope of -62 mV. dec-1 under acidic conditions. This work positions the low-loaded Pd NPs on magnetic lignosulfonate as a viable alternative to traditional noble metal catalysts, contributing to advancements in green chemistry and sustainable energy solutions.

Minimizing food oxidation using aromatic polymer: From lignin into nano-lignin

Food loss and waste caused by oxidation result in environmental and economic losses and health threats. Lignin is an abundant aromatic polymer with varied antioxidant capacity, which can reduce food oxidation caused by radical species exposure. The lignin antioxidant strength can be influenced by source, type, structure, processing, degradation products, chemical modifications, and particle size. Lignin in micro- or nano-particles has high reactivity and is associated with increased surface area to improve antioxidant capacity. Lignin can be used as a food additive to suppress lipid and protein oxidation, although its effect on fruit/vegetable oxidation needs to be discussed. The lignin antioxidant properties are promising to be applied in food industries, such as food additives, animal feed supplements, and antioxidant packaging designs. However, there are challenges and limitations to consider, such as the potential for toxicity reactions in some individuals and the need for further research to understand its effects on different food products fully. As a feed nutrition, lignin can improve meat quality. Meanwhile, loading lignin in the packaging matrix can extend the food shelf life through antioxidant and antimicrobial activities, and UV-block. Lignin also improves packaging properties (conventional and 3D-printing fabrication) to maintain food quality, e.g., changes in mechanical properties, hydrophobicity, water vapor permeability, and other influences. This article reviews lignin's role as a natural antioxidant in the food industry. Future directions and discussions relate to prooxidative mechanisms, toxicity, fruit and vegetable preservation mechanisms, inhibition of protein oxidation, activity to food enzymes (fruit ripening enzyme activators and inhibitors of cellulase and β-glucosidase enzyme), dispersity in packaging matrices, and material diversification for 3D printing.

Lignin: An Adaptable Biodegradable Polymer Used in Different Formulation Processes

INTRODUCTION

LIG is a biopolymer found in vascular plant cell walls that is created by networks of hydroxylated and methoxylated phenylpropane that are randomly crosslinked. Plant cell walls contain LIG, a biopolymer with significant potential for usage in modern industrial and pharmaceutical applications. It is a renewable raw resource. The plant is mechanically protected by this substance, which may increase its durability. Because it has antibacterial and antioxidant qualities, LIG also shields plants from biological and chemical challenges from the outside world. Researchers have done a great deal of work to create new materials and substances based on LIG. Numerous applications, including those involving antibacterial agents, antioxidant additives, UV protection agents, hydrogel-forming molecules, nanoparticles, and solid dosage forms, have been made with this biopolymer.

METHODS

For this review, a consistent literature screening using the Pubmed database from 2019-2024 has been performed.

RESULTS

The results showed that there is an increase in interest in lignin as an adaptable biomolecule. The most recent studies are focused on the biosynthesis and antimicrobial properties of lignin-derived molecules. Also, the use of lignin in conjunction with nanostructures is actively explored.

CONCLUSIONS

Overall, lignin is a versatile molecule with multiple uses in industry and medical science.

Mechanistic insights and applications of lignin-based ultraviolet shielding composites: A comprehensive review

Lignin is a green aromatic polymer constructed from repeating phenylpropane units, incorporating features such as phenolic hydroxyl groups, carbonyl groups, and conjugated double bonds that serve as chromophores. These structural attributes enable it to absorb a wide spectrum of ultraviolet radiation within the 250-400 nm range. The resulting properties make lignin a material of considerable interest for its potential applications in polymers, packaging, architectural decoration, and beyond. By examining the structure of lignin, this research delves into the structural influence on its UV-shielding capabilities. Through a comparative analysis of lignin's use in various UV-shielding applications, the study explores the interplay between lignin's structure and its interactions with other materials. This investigation aims to elucidate the UV-shielding mechanism, thereby offering insights that could inform the development of high-value applications for lignin in UV-shielding composite materials.

Self-Formation of Lignin Particles Through Melt-Extrusion for Active Biodegradable Food Packaging

This study presents a method for the self-formation of lignin particles within a polylactic acid (PLA) matrix during melt-extrusion, eliminating the need for separation and drying steps typically associated with submicro-size lignin particles. This method effectively mitigates the problem of agglomeration often associated with the drying step. Softwood kraft lignin, guaiacyl lignin (GL-lignin), was dissolved in low-molecular-weight poly(ethylene glycol) (PEG) and was introduced into a twin-screw extruder using a liquid feeder. Lignin particles within a particle size range of 200-500 nm were observed in the extrudate of the PLA/PEG/GL-lignin composites. PLA/PEG/GL-lignin composite films were produced through blown film extrusion. These composite films demonstrated superior ultraviolet (UV)-barrier and antioxidant properties compared to neat PLA films, with optical and mechanical characteristics comparable to those of neat PLA. Moreover, migration values of the composite films in various food simulants were below regulatory limits, suggesting their potential for food packaging applications. This self-formation process offers a promising approach for utilizing lignin for PLA applications.

Enhanced antifungal properties of poly(butylene succinate) film with lignin nanoparticles and trans-cinnamaldehyde for mango packaging

Sustainable poly(butylene succinate) (PBS) films incorporating lignin nanoparticles (LN) and trans-cinnamaldehyde (CN) have been developed to preserve mango freshness and provide food safety. PBS/LN, PBS/CN, and PBS/LN/CN composite films were produced by blown film melt extrusion. This study investigated the effect of CN-LN on the CN remaining content, thermal, mechanical, and barrier properties, diffusion coefficient, and antifungal activity of PBS films both in vitro and in vivo. Results showed that LN in the PBS/LN/CN composite film contained more CN than in the PBS/CN film. The compatibility of CN-LN with PBS produced homogeneous surfaces with enhanced barrier properties. PBS/LN/CN composite films demonstrated superior antifungal efficacy, inhibiting the growth of Colletotrichum gloeosporioides and preserving mango quality during storage. Results suggested that incorporating LN into PBS composite films prolonged the sustained release of antifungal agents, thereby inhibiting microbial growth and extending the shelf life of mangoes. Development of PBS/LN/CN composite films is a beneficial step toward reducing food waste and enhancing food safety.

A Review of Weathering Studies in Plastics and Biocomposites-Effects on Mechanical Properties and Emissions of Volatile Organic Compounds (VOCs)

Polymeric materials undergo degradation when exposed to outdoor conditions due to the synergistic effects of sunlight, air, heat, and moisture. The degradation can lead to a decline in mechanical properties, fading, surface cracking, and haziness, attributed to the cleavage of the polymer chains and oxidation reactions. Accelerated weathering testing is a useful technique to evaluate the comparative photodegradation of materials within a reasonable timeframe. This review gives an overview of the different degradation mechanisms occurring in conventional plastics and bio-based materials. Case studies on accelerated weathering and its effect on the mechanical properties of conventional plastics and biocomposites are discussed. Different techniques for analysing volatile organic emissions (VOCs) have been summarized and studies highlighting the characterization of VOCs from aged plastics and biocomposites after aging have been cited.

Effect of DES lignin incorporation on physicochemical, antioxidant and antimicrobial properties of carboxymethyl cellulose-based films

Herein, three pretreated grapevine lignins were incorporated into carboxymethyl cellulose films. The effects of traditional NaOH pretreated lignin and DES (ChCl-LA, ChCl-LA & K2CO3-EG) pretreated lignin on film properties were compared. Modern analytical techniques were employed to systematically characterize the pretreated lignin and the different CMC-lignin films. The results showed that DES lignin was of high purity, low molecular weight, and homogeneous structure. It outperformed traditional NaOH lignin in terms of compatibility with CMC, enabling it to perform its bioactivity and physicochemical functions in films. This feature effectively enhanced the hydrophobicity, UV shielding ability, water vapor barrier, thermal stability, mechanical properties, and biological activity of CMC-DES lignin film. NMR (2D HSQC) showed that the excellent antioxidant and antibacterial capabilities of CMC-DES lignin film are due to the retention of butyl (S) and p-hydroxyphenyl (H) units in DES lignin, resulting in its rich phenolic hydroxyl content. The detailed structural elucidation of DES lignin's chemical interactions with CMC provided valuable insights into the advantageous properties observed in the films, presenting innovative solutions for applications in the food packaging and preservation industries.

Preparation of sustainable oxidized nanocellulose films with high UV shielding effect, high transparency and high strength

UV protection has become crucial as increasing environmental pollution has led to the destruction of the ozone layer, which has a weakened ability to block UV rays. In this paper, we successfully prepared cellulose-based biomass films with high UV shielding effect, high transparency and high tensile strength by graft-modifying oxidized cellulose nanocellulose (TOCN) with folic acid (FA) and borrowing vacuum-assisted filtration. The films had tunable UV shielding properties depending on the amount of FA added. When the FA addition was 20 % (V/V), the film showed 0 % transmittance in the UV region (200-400 nm) and 90.61 % transmittance in the visible region (600 nm), while the tensile strength was up to 150.04 MPa. This study provides a new integrated process for the value-added utilization of nanocellulose and a new route for the production of functional biomass packaging materials. The film is expected to be applied in the field of food packaging with UV shielding.

Impact of production methods on properties of natural rosin added polylactic acid/sodium pentaborate and polylactic acid/calcium carbonate films

Nowadays biopolymers play an important role in packaging materials due to their protection properties against physical and chemical degradation or mechanical resistance. In this study, sodium pentaborate anhydride (B5NaO8), eggshell (CaCO3) nanoparticles, and natural rosin additives were introduced to pure PLA to produce a biofilm protecting from UV rays. The impact of the preparation method of hybrid biocomposite films was carried out based on the polymer casting method and using in the first case only magnetic mixing whereas magnetic mixing coupled with ultrasonic homogenizer was used in the second case. All biocomposite films were obtained for a nanoparticle content fixed at 7.5 wt% and various rosin rates (1, 5, 10, and 40 wt%). This study aims to expand the UV protection zone in PLA films. The thermal and mechanical properties, transmittance of UV-visible rays, microstructure analysis, and contact angle values were evaluated to detect the effect of the preparation method on the final properties. The results showed that the homogeneous distribution of the particles was more effective using an ultrasonic homogenizer. The increase of the rosin amount exhibited a reduction of the UV-visible light transmittance and the wettability was observed, demonstrating a potential use of these films in packaging.

Nanotechnology in wood science: Innovations and applications

Application of nanomaterials is gaining tremendous interest in the field of wood science and technology for value addition and enhancing performance of wood and wood-based composites. This review focuses on the use of nanomaterials in improving the properties of wood and wood-based materials and protecting them from weathering, biodegradation, and other deteriorating agents. UV-resistant, self-cleaning (superhydrophobic) surfaces with anti-microbial properties have been developed using the extraordinary features of nanomaterials. Scratch-resistant nano-coatings also improve durability and aesthetic appeal of wood. Moreover, nanomaterials have been used as wood preservatives for increasing the resistance against wood deteriorating agents such as fungi, termites and borers. Wood can be made more resistant to ignition and slower to burn by introducing nano-clays or nanoparticles of metal-oxides. The use of nanocellulose and lignin nanoparticles in wood-based products has attracted huge interest in developing novel materials with improved properties. Nanocellulose and lignin nanoparticles derived/synthesized from woody biomass can enhance the mechanical properties such as strength and stiffness and impart additional functionalities to wood-based products. Cellulose nano-fibres/crystals find application in wide areas of materials science like reinforcement for composites. Incorporation of nanomaterials in resin has been used to enhance specific properties of wood-based composites. This review paper highlights some of the advancements in the use of nanotechnology in wood science, and its potential impact on the industry.

The mechanism of self-assembly of lignin in deep eutectic solvent based on sulfamic acid and urea through molecular dynamics simulation

Due to the diversity of industrial lignin sources and the complexity of its structure, its application as a high-value material is limited. Lignin nanoparticles (LNPs) have emerged as a hotspot for research due to their advantages of high specific surface area and high dispersion and the solvent transfer method is commonly used for the preparation of LNPs. In this paper, LNPs were prepared by solvent transfer method using DES based on sulfamic acid and urea (S/U DES) as solvent and water as anti-solvent. To explore the internal mechanism of the self-assembly of nanoparticles, a theoretical model of the solvent system and model lignin compound was constructed with the assistance of quantum chemistry and molecular dynamics theories. Through classical molecular dynamics (MD) simulations, the interaction energy, radius of gyration (ROG), solvent accessible surface area (SASS), radial and spatial distribution function (RDFs/SDFs), hydrogen bonding, and the morphology changes were analyzed to reveal the internal mechanism of self-assembly of model lignin compounds in S/U DES. This study is useful in revealing the mechanism of interaction between lignin and DES, as well as providing a benchmark for the green and efficient preparation of lignin nanoparticles.

Lignin Nanoparticles for Enhancing Physicochemical and Antimicrobial Properties of Polybutylene Succinate/Thymol Composite Film for Active Packaging

The natural abundance, polymer stability, biodegradability, and natural antimicrobial properties of lignin open a wide range of potential applications aiming for sustainability. In this work, the effects of 1% (w/w) softwood kraft lignin nanoparticles (SLNPs) on the physicochemical properties of polybutylene succinate (PBS) composite films were investigated. Incorporation of SLNPs into neat PBS enhanced T_d from 354.1 °C to 364.7 °C, determined through TGA, whereas T_g increased from -39.1 °C to -35.7 °C while no significant change was observed in T_m and crystallinity, analyzed through DSC. The tensile strength of neat PBS increased, to 35.6 MPa, when SLNPs were added to it. Oxygen and water vapor permeabilities of PBS with SLNPs decreased equating to enhanced barrier properties. The good interactions among SLNPs, thymol, and PBS matrix, and the high homogeneity of the resultant PBS composite films, were determined through FTIR and FE-SEM analyses. This work revealed that, among the PBS composite films tested, PBS + 1% SLNPs + 10% thymol showed the strongest microbial growth inhibition against Colletotrichum gloeosporioides and Lasiodiplodia theobromae, both in vitro, through a diffusion method assay, and in actual testing on active packaging of mango fruit (cultivar "Nam Dok Mai Si Thong"). SLNPs could be an attractive replacement for synthetic substances for enhancing polymer properties without compromising the biodegradability of the resultant material, and for providing antimicrobial functions for active packaging applications.