Cationic modification of cellulose as a sustainable and recyclable adsorbent for anionic dyes

Surface cationization of cellullose via Fenton oxidation for remedying dye contaminants: Adsorption performance and mechanism

Targeted modification of cellulose corresponds to the physicochemical characteristics of dyes is advantageous to increase its adsorption capacity, but which is still exclusive. Here, a Fenton oxidation system was applied to fabricate microcrystalline cellulose (MCC) supported iron (Cel@Fe). Physicochemical property analysis elucidated that the incorporation of Fe nanoparticles tuned the surface charge for oxidized MCC. The carboxyl groups from partial oxidation of MCC could chelate Fe2+ or Fe3+ ions, forming [cellulose-Feion(H2O)x] complexes. Polyaromatic 1,9-dimethylmethylene blue (DMB) and acid yellow 79 (AY79) were used as the modeling dyes to evaluate the adsorption capacity of cationized Cel@Fe. With a theoretical maximum adsorption capacity of 255.1 mg/g for AY79 on Cel@Fe-1.0 and 79.2 mg/g for DMB on MCC, adsorption matched the pseudo second order (R2 = 0.999) and the Langmuir isotherm (R2 = 0.999) models for both dyes. The adsorption for AY79 on Cel@Fe was found to be primarily dependent on electrostatic interactions, atomic non-covalent interactions (FeO), and steric effect, according to the reduced density gradient (RDG) Gaussian density functional theory (DFT) calculation. This work presents a promising strategy to synthesize cationized and sinkable cellulose adsorbent for efficient decontamination of wastewater containing dyes.

Tailoring cellulose: from extraction and chemical modification to advanced industrial applications

Cellulose is a natural polymer with excellent physicochemical properties that can be extracted from various plant sources and has widespread applications across multiple industries. Due to its biodegradability, renewability, and mechanical strength, cellulose has gained significant attention in fields such as pharmaceuticals, food packaging, sensors, water treatment, and textiles. However, its inherent limitations, such as poor solubility, low electrical conductivity, and limited functionality, hinder its application in advanced technologies. To overcome these challenges, chemical modifications have been extensively explored to enhance its structural properties and broaden its utility in specialized applications. This review explores the modifications applied to cellulose with a focus on targeted advanced industries. Emphasis is placed on identifying the limitations of cellulose in each industry and highlighting the most recent techniques available for modifying its properties to meet specific requirements. Finally, this review discusses the challenges associated with cellulose processing and the high costs of extraction while providing insights into future research directions and potential advancements in cellulose-based technologies.

Quaternized cross-linked peach gum polysaccharide as an adsorbent for fast and selective removal of anionic dyes from aqueous solution

To overcome low adsorption capacity, slow adsorption rate, poor adsorption selectivity, and dissolution of peach gum polysaccharide (PGP), an amino-rich crosslinked PGP (ACPGP) was first synthesized by cross-linking highly soluble PGP. Subsequently, a cation-rich PGP (QCPGP) was prepared from ACPGP through the addition of glycidyltrimethyl ammonium chloride (GTAC) and a secondary quaternization. The step-by-step preparation process was confirmed, and the adsorption properties of PGP, ACPGP, and QCPGP were compared in detail. The adsorption of crude PGP for cationic dyes violet (MV, 135.0 mg/g) and methylene blue (MB, 121.4 mg/g) were spontaneous endothermic, following the pseudo-first-order kinetic model and D-R isotherm. Due to the presence of rich charged groups in their structure, their highly selective adsorption towards new coccine (NC) and tartrazine (TTZ) is spontaneous and endothermic, and can be described by the pseudo-first-order and pseudo-second-order kinetic models, respectively. According to the Langmuir isotherm, the Qm of ACPGP and QCPGP for NC and TTZ was calculated to be 876.2 and 1304.3 mg/g (NC), and 814.5 and 1136.7 mg/g (TTZ), respectively. QCPGP exhibited more advantages in terms of adsorption capacity, adsorption rate (equilibrium time of 10 min), environmental stability, adsorption selectivity, and regeneration efficiency, showing great potential in practical wastewater treatment applications.

Bio-inspired porous adsorbents with lotus-leaf-like hierarchical structures and mussel adhesive surfaces for high-capacity removal of toxic dyes

Basic dyes are highly toxic and have adverse effects on humans such as accelerated heart rate, shock, cyanosis, and tissue necrosis upon ingestion or skin contact. Efficient removal of basic dye pollutants from wastewater is therefore essential for the protection of the environment and human health. Biomolecules exhibit excellent dye removal performance in terms of removal capacity, selectivity, and rate. However, their poor thermal/chemical stability precludes their large-scale industrial applications. Herein, porous aromatic frameworks (PAFs) were utilized for the biomimetic construction of mussel, which included two unique features: (1) multistage pore structures for the rapid transport of dye contaminants and (2) mussel-inspired adhesive surfaces for cationic dye removal. Accordingly, the solid PAFs exhibited a record adsorption capacity of 7300 mg g-1 and ultrahigh adsorption rates for cationic dye (safranine T) (188.78 mg g-1 min-1 in the first 20 min). Notably, the bionic adsorbent system exhibited outstanding dye removal performance under various conditions such as after multiple reuse cycles, acid/alkali environments, presence of multiple anions, and in different water bodies (e.g., seawater, lake water, rainwater, and sanitary wastewater). This demonstrates the broad adaptability of the system and its ability to effectively deal with dye contamination in a variety of environments.

Modified Cellulose for Adsorption of Methylparaben and Butylparaben from an Aqueous Solution

Emerging contaminants are chemical products that are found in low concentrations, are not regulated by environmental norms, and cause health effects. Among this group of contaminants are parabens, a family of p-hydroxybenzoic acid esters used as preservatives in cosmetics, pharmaceuticals, and food products. Recent research describes parabens as endocrine disruptors that can cause health alterations. Some of the best alternatives for pollutant removal include the adsorption process, which can use materials that are inexpensive, abundant, and susceptible to modifications. In this sense, cellulose can be an option for obtaining materials that can be used in the removal of contaminants. This research investigates the synthesis of benzoic cellulose (MCB) and magnetic cellulose (MCM) as well as its use as an adsorbent for the removal of methylparaben (MP) and butylparaben (BP) from water. Likewise, physicochemical characterization, including Fourier transform infrared (FTIR), scanning electronic microscopy (SEM), energy-dispersive spectroscopy (EDS), X-ray diffraction (XRD), and thermogravimetric analysis (TGA), for both cellulose materials was carried out. Moreover, pseudo-first-order, pseudo-second-order, Elovich, Weber, Morris, and Boyd models were used to investigate the adsorption kinetics. As a result, the pseudo-second-order model was favorable for both modified cellulose and the two parabens assayed. Finally, Freundlich, Langmuir, and Sips adsorption isotherm models were investigated; the Langmuir model was the best for the adsorption isotherm data. The adsorption of methylparaben and butylparaben was in the following order: MCM > MCB. The maximum adsorption capacity of MP and BP for MCM was 9.58 and 12.03 mg g-1, respectively. For instance, the results showed that the modified cellulose adsorbed the parabens physically, which could involve electrostatic attraction, hydrogen bonding, π-π bonding, and hydrophobic interactions.

Emerging environmentally friendly bio-based nanocomposites for the efficient removal of dyes and micropollutants from wastewater by adsorption: a comprehensive review

Water scarcity will worsen due to population growth, urbanization, and climate change. Addressing this issue requires developing energy-efficient and cost-effective water purification technologies. One approach is to use biomass to make bio-based materials (BBMs) with valuable attributes. This aligns with the goal of environmental conservation and waste management. Furthermore, the use of biomass is advantageous because it is readily available, economical, and has minimal secondary environmental impact. Biomass materials are ideal for water purification because they are abundant and contain important functional groups like hydroxyl, carboxyl, and amino groups. Functional groups are important for modifying and absorbing contaminants in water. Single-sourced biomass has limitations such as weak mechanical strength, limited adsorption capacity, and chemical instability. Investing in research and development is crucial for the development of efficient methods to produce BBMs and establish suitable water purification application models. This review covers BBM production, modification, functionalization, and their applications in wastewater treatment. These applications include oil-water separation, membrane filtration, micropollutant removal, and organic pollutant elimination. This review explores the production processes and properties of BBMs from biopolymers, highlighting their potential for water treatment applications. Furthermore, this review discusses the future prospects and challenges of developing BBMs for water treatment and usage. Finally, this review highlights the importance of BBMs in solving water purification challenges and encourages innovative solutions in this field.

Cellulose-supported bioadsorbent from natural hemp fiber for removal of anionic dyes from aqueous solution

The aim of this study is to prepare an eco-friendly bioadsorbent by graft copolymerization and modification from hemp fiber including bio-macromolecules such as cellulose, hemicellulose and lignin for anionic dyes adsorption from aqueous solutions, and to investigate adsorptive properties. The prepared cellulose-supported bioadsorbent (TEPA-(GMA-g-HF)) was characterized in detail using SEM-EDX, STEM, FTIR, XRD, TGA and BET techniques and calculating the point of zero charge. It was used as an adsorbent to remove three different anionic dyes, Remazol Brilliant Blue R (RBBR), Reactive Red 120 (RR120) and Reactive yellow 160 (RY160) from the aqueous medium. The effects of adsorbent amount, pH, initial dye concentration, time and temperature on the adsorption were investigated. From the results, it was determined that the adsorption of all three dyes to the developed fibrous bioadsorbent was more compatible with the pseudo-second-order kinetic and the Langmuir isotherm model. It was found that the adsorption capacity increased with increasing temperature, and the adsorption capacity at 298 K was 91.70 mg/g for RBBR, 83.33 for RY160 and 76.34 mg/g for RR120, respectively. Dye removal efficiencies were provided as approximately 100 % at acidic pHs. This high removal efficiency has also achieved in the dense matrix medium, and even after five consecutive reused.

Unveiling the interactions between biomaterials and heterocyclic dyes: A sustainable approach for wastewater treatment

The present Review investigates the interactions between biomaterials and heterocyclic dyes, focusing on their potential application in sustainable wastewater treatment. Heterocyclic dyes are widely used in various industries, resulting in their widespread presence in wastewater, posing environmental challenges. This review explores the utilization of biomaterials as adsorbents for the removal of heterocyclic dyes from contaminated water sources. The interactions between biomaterials, such as cellulose, microfibrilated cellulose and lignin and different heterocyclic dyes are examined through reported experimental analysis and characterization techniques. The study evaluates the adsorption capacity, kinetics, and thermodynamics of the biomaterial-dye systems to elucidate the underlying mechanisms and optimize the treatment process. The review highlight the promising potential of biomaterial-based approaches for sustainable wastewater treatment, providing insights for the development of efficient and environmentally friendly dye removal technologies.

AK, Yahya EB, Muhammad S, Rizal S, Ahmad MI, Surya I, Abdullah CK. Recent Advances in Nanocellulose Aerogels for Efficient Heavy Metal and Dye Removal

Water pollution is a significant environmental issue that has emerged because of industrial and economic growth. Human activities such as industrial, agricultural, and technological practices have increased the levels of pollutants in the environment, causing harm to both the environment and public health. Dyes and heavy metals are major contributors to water pollution. Organic dyes are a major concern because of their stability in water and their potential to absorb sunlight, increasing the temperature and disrupting the ecological balance. The presence of heavy metals in the production of textile dyes adds to the toxicity of the wastewater. Heavy metals are a global issue that can harm both human health and the environment and are mainly caused by urbanization and industrialization. To address this issue, researchers have focused on developing effective water treatment procedures, including adsorption, precipitation, and filtration. Among these methods, adsorption is a simple, efficient, and cheap method for removing organic dyes from water. Aerogels have shown potential as a promising adsorbent material because of their low density, high porosity, high surface area, low thermal and electrical conductivity, and ability to respond to external stimuli. Biomaterials such as cellulose, starch, chitosan, chitin, carrageenan, and graphene have been extensively studied for the production of sustainable aerogels for water treatment. Cellulose, which is abundant in nature, has received significant attention in recent years. This review highlights the potential of cellulose-based aerogels as a sustainable and efficient material for removing dyes and heavy metals from water during the treatment process.

Exploration of Reactive Black 5 Dye Desorption from Composite Hydrogel Beads—Adsorbent Reusability, Kinetic and Equilibrium Isotherms

A low-cost adsorbent was prepared by using cherry stones powder and chitosan and used to retain Reactive Black 5 dye from aqueous solution. Then, the spent material was submitted to a regeneration process. Five different eluents (water, sodium hydroxide, hydrochloric acid, sodium chloride and ethanol) were tested. Among them, sodium hydroxide was selected for an advanced investigation. Values of three working conditions, namely the eluent volume, its concentration and the desorption temperature, were optimized by Response Surface Methodology-Box–Behnken Design. In the established settings (NaOH volume: 30 mL, NaOH concentration: 1.5 M, working temperature: 40 °C), three successive cycles of adsorption/desorption were conducted. The analysis performed by Scanning Electron Microscopy and by Fourier Transform Infrared Spectroscopy revealed the evolution of the adsorbent throughout the dye elution from the material. Pseudo-second-order kinetic model and Freundlich equilibrium isotherm were able to accurately describe the desorption process. Based on the acquired results, our outcomes sustain the suitability of the synthesized material as dye adsorbent and the possibility of efficaciously recycling and reusing it.