Fe3O4 modified chitosan based co-polymeric magnetic composite hydrogel: Synthesis, characterization and evaluation for the removal of methylene blue from aqueous solutions

Bipyridine covalent organic framework aerogel for highly selective recovery of palladium in wastewater

Palladium (Pd), a rare and precious metal, is highly valued due to its non-renewable nature and significant cost. Therefore, recovering palladium from industrial wastewater is of great importance but remains a challenge. Herein, a composite aerogel adsorbent has been developed by linking a bipyridine covalent organic framework, termed TpBpy, with chitosan (CS) through robust covalent bonds. The resulting TpBpy/CS aerogel is employed for the selective separation and recovery of palladium at low concentrations in real wastewater. Experimental results reveal that the maximum adsorption capacity of the TpBpy/CS aerogel for Pd(ii) is 274.4 mg g-1 at pH 1. Additionally, even in the presence of other coexisting ions at concentrations 100 times higher than Pd(ii), the adsorption efficiency for Pd(ii) remains above 99%. Mechanistic investigations indicate that the adsorption of Pd(ii) by the TpBpy/CS aerogels primarily occurs through the coordination between pyridine N and Pd(ii), as well as the electrostatic interaction between protonated amino groups and Pd(ii). Moreover, the TpBpy/CS aerogel demonstrates exceptional reusability, maintaining an adsorption efficiency for Pd(ii) above 99% after nine adsorption-desorption cycles. Overall, the TpBpy/CS aerogel is a promising monolithic adsorbent for the efficient recovery of Pd(ii) from acidic industrial wastewater due to its exceptional adsorption capacity and selectivity, demonstrating substantial potential for practical applications.

Insights and perspectives of chitosan-based hydrogels for the removal of heavy metals and dyes from wastewater

Water pollution has become an increasingly serious issue, necessitating the design and development of more effective wastewater treatment methods. Chitosan-based hydrogels, owing to their unique structural and chemical properties, have demonstrated high efficiency in removing contaminants. However, the application remains restricted by the scarcity of effective adsorption sites and limited environmental stability. This review summarizes recent advances in the production of chitosan-based hydrogels and their application in the removal of heavy metals and dyes from wastewater. Various methods to improve the adsorption capacity of chitosan-based hydrogels for different heavy metals, anionic, and cationic dyes have been reviewed, and the adsorption mechanisms have been elucidated. In addition, the application of chitosan-based hydrogels for adsorption faces significant challenges, including sensitivity to pH change, the coexistence of multiple pollutants, and difficulties in recycling. This review outlines relevant strategies to overcome these challenges and aims to provide a reference for synthesizing novel, efficient, and environmentally friendly chitosan-based adsorbents. This review aims to offer new ideas and directions for addressing the issue of heavy metal and dye pollution in wastewater.

Novel biocomposite of ionic cross-linked chitosan and acid-treated potato (Solanum tuberosum L.) peel agro-waste for highly efficient removal of methylene blue dye from water

In this study, a biocomposite material (CS-OXA/PP-SA) composed of ionic crosslinked chitosan-oxalate (CS-OXA) and chemically modified lignocellulosic biomass (potato (Solanum tuberosum L.) peel-H2SO4 acid, PP-SA) was synthesized to serve as a bioadsorbent for removing methylene blue (MB) dye from aquatic systems. The research utilized response surface methodology (RSM) to evaluate the effects of three variables: CS-OXA/PP-SA dosage (0.02 to 0.08 g), pH (4 to 10), and duration (10 to 40 min) on MB dye adsorption. The investigation of the BET surface area of the CS-OXA/PP-SA composite revealed that it had a total pore volume of 0.0261 cm3/g, a surface area of 8.26 m2/g, and an average pore diameter of 12.67 nm. The XRD pattern shows a peak at 20.5°, confirming the crystalline CS within the composite, and another at 35°, attributed to the (004) crystal plane of cellulose in PP-SA. These peaks verify the successful integration of CS and PP-SA into the biocomposite. The optimal conditions identified include an adsorbent dose of 0.055 g, a solution pH of approximately 10, and a contact duration of 29.8 min. The optimal MB dye removal efficiency achieved under these parameters was 90.9 %. The results demonstrated that the adsorption of MB onto CS-OXA/PP-SA aligns closely with the pseudo-first-order kinetic model, suggesting a physisorption-dominated process. Additionally, the adsorption isotherm fitting to the Freundlich model highlights the heterogeneous nature of the adsorbent surface and the multilayer adsorption mode. The CS-OXA/PP-SA composite demonstrated a maximum adsorption capacity of 314.92 mg/g for MB dye. The adsorption mechanism is attributed to electrostatic interactions, hydrogen bonding, and n-π stacking interactions. The findings suggest that CS-OXA/PP-SA is a highly effective bioadsorbent for treating dye-contaminated wastewater. This study introduces a sustainable and eco-friendly approach to developing efficient adsorbents for the removal of cationic dyes from contaminated water. The biocomposite demonstrates high adsorption capacity, cost-effective production, and renewable sources, offering an innovative and practical solution for wastewater treatment while adhering to green chemistry principles.

Recycling Fe and improving organic pollutant removal via in situ forming magnetic core-shell Fe3O4@CaFe-LDH in Fe(II)-catalyzed oxidative wastewater treatment

Due to its high efficiency, Fe(II)-based catalytic oxidation has been one of the most popular types of technology for treating growing organic pollutants. A lot of chemical Fe sludge along with various refractory pollutants was concomitantly produced, which may cause secondary environmental problems without proper disposal. We here innovatively proposed an effective method of achieving zero Fe sludge, reusing Fe resources (Fe recovery = 100%) and advancing organics removal (final TOC removal > 70%) simultaneously, based on the in situ formation of magnetic Ca-Fe layered double hydroxide (Fe3O4@CaFe-LDH) nano-material. Cations (Ca2+ and Fe3+) concentration (≥ 30 mmol/L) and their molar ratio (Ca:Fe ≥ 1.75) were crucial to the success of the method. Extrinsic nano Fe3O4 was designed to be involved in the Fe(II)-catalytic wastewater treatment process, and was modified by oxidation intermediates/products (especially those with COO- structure), which promoted the co-precipitation of Ca2+ (originated from Ca(OH)2 added after oxidation process) and by-produced Fe3+ cations on its surface to in situ generate core-shell Fe3O4@CaFe-LDH. The oxidation products were further removed during Fe3O4@CaFe-LDH material formation via intercalation and adsorption. This method was applicable to many kinds of organic wastewater, such as bisphenol A, methyl orange, humics, and biogas slurry. The prepared magnetic and hierarchical CaFe-LDH nanocomposite material showed comparable application performance to the recently reported CaFe-LDHs. This work provides a new strategy for efficiently enhancing the efficiency and economy of Fe(II)-catalyzed oxidative wastewater treatment by producing high value-added LDHs materials.

XG and CS-based self-assembled nanocomposite hydrogel embedding fluorescent NCQDs capable of detection and adsorptive removal of the polar MO and Cr(VI) pollutants

Aiming at dealing with organic and inorganic pollutants dissolved in aquatic environments, we introduce self-assembled fluorescent nanocomposite hydrogel based on a binary polysaccharide network (xanthan gum/chitosan) embedding nitrogen-doped carbon quantum dots not only as a hybrid solid optical sensor for detecting Cr(VI) ions but also to remove anionically charged contaminants Cr(VI) and methyl orange (MO) by acting as an adsorbent. This fluorescent nanocomposite achieved a detection limit of 0.29 μM when used to detect Cr(VI) and demonstrated a fluorescence quantum yield of 59.7 %. Several factors contributed to the effectiveness of the adsorption of Cr(VI) and MO in batch studies, including the solution pH, dosage of the adsorbent, temperature, initial contamination level, and contact time. Experimental results showed 456 mg/g maximum adsorption capacity at pH 4 for MO compared to 291 mg/g at pH 2 for Cr(VI) at 25 °C. In addition to conforming to Langmuir's model, Cr(VI) and MO's adsorption kinetics closely matched pseudo-second-order. Using thermodynamic parameters, the results indicate that Cr(VI) and MO adsorb spontaneously and exothermically. Recycling spent adsorbent for Cr(VI) and MO using NaOH at 0.1 M was possible; the respective adsorption efficiency remained at approximately 82.2 % and 83 % after the fifth regeneration cycle.

Highly efficient removal of adsorbed cationic dyes by dual-network chitosan-based hydrogel

This research presents the effective preparation of a novel dual network chitosan-based hydrogel (CMAPP) for the adsorption of methylene blue (MB), malachite green (MG), crystalline violet (CV), and basic fuchsin (BF) using the sol-gel method to address the escalating issue of dye pollution. FTIR, XRD, SEM, EDS, XPS, TGA, and zeta potential study examined hydrogel production and physicochemical properties. To ascertain the maximum adsorption capacity, the influences of pH, temperature, initial dye concentration, contact time, and adsorbent dosage on adsorption were systematically analyzed. It was observed that CMAPP demonstrated significant removal efficiencies (97.62%, 96.67%, 98.12%, and 99.32%) for the dyes MB, MG, CV, and BF at a concentration of 500 mg/L under optimal conditions. The findings from the adsorption kinetics and isotherm studies indicated that pseudo-second-order kinetics and the Langmuir model were the most appropriate for characterizing the adsorption process of hydrogels. The thermodynamic findings demonstrated that the adsorption process was exothermic and spontaneous. After five cycles of adsorption, the hydrogel demonstrated a consistent dye removal efficiency of around 80%, indicating commendable recyclability. In the interference studies, CMAPP exhibits superior anti-interference capability against CV and BF, which is advantageous for its practical application. The findings from XPS and FTIR investigations indicate that electrostatic attraction, hydrogen bonding, and n-π interactions are the primary forces between the adsorbent and the dyes. The synthesis of CMAPP offers an innovative approach for the effective elimination of cationic dyes and demonstrates significant potential in the treatment of complicated wastewater.

Polysaccharide-based biopolymeric magnetic hydrogels for remediation of antibiotics from aqueous solution

Polysaccharide-based biopolymeric magnetic hydrogels have garnered significant attention as effective materials for wastewater treatment due to their high adsorption capacity and environmentally friendly nature. This review examines recent advancements in the development of biopolymeric magnetic hydrogels derived from polysaccharides such as cellulose, chitosan, alginate, carrageenan, starch, and gums, with a focus on their application in removing antibiotics from contaminated water as it not only enhances adsorption performance but also simplifies separation processes after treatment, making them highly efficient for practical applications. The review aims to provide a comprehensive overview of the synthesis techniques, performance characteristics, and interaction mechanisms of these hydrogels, highlighting their renewability and suitability for large-scale water treatment. Despite their promise, there is a lack of in-depth analysis of their performance and fabrication methods. This review addresses this gap by evaluating various synthesis methods and assessing the hydrogels' efficiency in adsorbing antibiotic pollutants. Key findings reveal that the biopolymeric and magnetic components contribute to the materials' enhanced binding, better removal capabilities, and easy recoverability. The interaction mechanisms between the hydrogels and antibiotics are explored, demonstrating their superior adsorption potential. Future challenges and research directions are discussed, with an emphasis on improving the scalability and practical applications of these hydrogels. Overall, this review offers valuable insights into the development and potential of biopolymeric magnetic hydrogels to contribute towards effective wastewater purification.

Recent advance for animal-derived polysaccharides in nanomaterials

Inspired by the structure characteristics of natural products, the size and morphology of particles are carefully controlled using a bottom-up approach to construct nanomaterials with specific spatial unit distribution. Animal polysaccharide nanomaterials, such as chitosan and chondroitin sulfate nanomaterials, exhibit excellent biocompatibility, degradability, customizable surface properties, and novel physical and chemical properties. These nanomaterials hold great potential for development in achieving a sustainable bio-economy. This paper provides a summary of the latest research results on the preparation of nanomaterials from animal polysaccharides. The mechanism for preparing nanomaterials through the bottom-up method from different sources of animal polysaccharides is introduced. Furthermore, this paper discusses the potential hazards posed by industrial applications to the environment and human health, as well as the challenges and future prospects associated with using animal polysaccharides in nanomaterials.

Strong, tough, conductive and transparent nanocellulose hydrogel based on Ca2+-induced cross-linked double-networks and its adsorption of methylene blue dye

A novel multi-performance SHNC/SA/CaCl2 hydrogel with multi-performance was prepared via ultra-low-temperature freeze-thaw cycling and Ca2+ cross-linking for the removal of methylene blue (MB) from industrial wastewater. Various methods were used to characterize the structure and properties of hydrogel, and the internal structure of hydrogel showed a three-dimensional network with hydrogen and ester bonds. The SHNC/SA/CaCl2-15 hydrogel exhibited the highest tensile properties (elongation = 800 %), viscoelasticity (90 kPa), compressive strength (0.45 MPa), tensile strength (0.47 MPa) and ionic conductivity (4.34 S/cm). The maximum adsorption capacity of 2 g SHNC/SA/CaCl2-15 hydrogel was 608.49 mg/g at 40 °C, pH = 8 and adsorption 24 h. The adsorption process of hydrogel toward MB was more consistent with the second-order kinetic model and Langmuir isothermal adsorption model. According to the Langmuir isotherm model, the maximum monolayer adsorption capacity of SHNC/SA/CaCl2-15 hydrogel toward MB can reach 613.88 mg/g. Finally, it was found that the removal rate of SHNC/SA/CaCl2-15 hydrogel for MB was still as high as 90 % after five cycles of the adsorption-desorption test, and it could be reused. The hydrogel can be used as cheap and reusable adsorption material for cationic dyes. Our study provides a new perspective for the development of multifunctional cellulose hydrogel adsorbent materials.

Fabrication of Magnetic Poly(L-lactide) (PLLA)/Fe3O4 Composite Electrospun Fibers

Electrospinning technology is widely used for preparing biological tissue engineering scaffolds because of its advantages of simple preparation, accurate process parameters, and easy control. Poly(L-lactide) (PLLA) is regarded as a promising biomass-based polymer for use in electrospinning. The incorporation of Fe3O4 nanoparticles (NPs) could improve the osteogenic differentiation and proliferation of cells in the presence or absence of a static magnetic field (SMF). In this work, these two materials were blended together to obtain electrospun samples with better dispersibility and improved magnetic properties. First, composite PLLA and Fe3O4 NP fibers were prepared by means of electrospinning. The influence of electrospinning conditions on the morphology of the composite fibers was then discussed. Changes in magnetic properties and thermal stability resulting from the use of different PLLA/Fe3O4 mass ratios were also considered. Next, the morphology, crystal state, thermodynamic properties, and magnetic properties of the electrospun samples were determined using scanning electron microscopy (SEM), thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), and vibration sample magnetization (VSM). The results showed that the fibers prepared using PLLA with Mn = 170,000 exhibited good morphology when electrospun at 12 KV. The magnetic properties of PLLA/Fe3O4 composite electrospun fibers increased with the NP content, with the exception of thermal stability. The results of the present study may help to promote the further development of PLLA/Fe3O4 composite materials in the biomedical field.

Development of Chitosan Polysaccharide-Based Magnetic Gel for Direct Red 83:1 Removal from Water

Water pollution caused by dyes is a significant environmental issue, necessitating the development of effective, cost-efficient decolorization methods suitable for industrial use. In this study, a Chitosan-Fe polymeric gel was synthesized, characterized, and tested for removing the azo dye Direct Red 83:1 from water. The polymeric magnetic chitosan was analyzed using various techniques: Field Emission Scanning Electron Microscopy (FE-SEM) revealed a porous structure, Differential Scanning Calorimetry (DSC) and Thermal Gravimetric Analysis (TGA) demonstrated the thermal stability, Infrared Spectrophotometry (IR) indicated the successful coordination of iron at the C3 position, and X-ray Powder Diffraction (XRD) confirmed the crystalline nature of the polymeric structure. Optimal conditions for kinetic and isotherm models were found at 1 g and pH 7.0. Adsorption behavior of Direct Red 83:1 onto magnetic chitosan gel beads was studied through kinetic tests and isotherm curves. The maximum adsorption capacity was 17.46 mg/g (qmax). The adsorption process followed pseudo-second-order kinetics (R2 = 0.999) and fit the Temkin isotherm (R2 = 0.946), suggesting heterogeneous surface adsorption. The newly synthesized Chitosan-Fe polymeric gel demonstrated good adsorption properties and facilitated easy separation of purified water.

Integration of multienzyme co-immobilization and biomimetic catalysis in magnetic metal-organic framework nanoflowers for α-amylase detection in fermentation samples

Multiple enzymes induce biological cascade catalysis is essential in nature and industrial production. However, the shortcomings of enzymes, including unsatisfactory stability, reusability, and sensitivity in harsh microenvironment, have restricted their broader use. Here, we report a facile method for fabricating a cascade system by combining the benefits of immobilized enzymes and biomimetic catalysis based on magnetic metal-organic framework nanoflowers (mMOFNFs). mMOFNFs prepared through the layered double hydroxide-derived strategy exhibited remarkable peroxidase-like activity and accessible amino interface, enabling it to serve not only as a reliable carrier for α-glucosidase and glucose oxidase fixation, but also as a nanozyme participating in cascade. On this basis, a colorimetric biosensor of excellent sensitivity and selectivity for α-amylase detection was constructed with a wide range (2-225 U L-1), low detection limit (2.48 U L-1), and rapid operation (30 min). This work provides a versatile strategy for establishing multi-enzyme cascade systems and rapid analysis of α-amylase.

Natural Polysaccharide-Based Hydrogels Used for Dye Removal

Removal of contaminants from discharge water is vital and demands urgent assistance with the goal to keep clean water. Adsorption is one of the most common, efficient, and low-priced methods used in water treatment. Various polysaccharide-based gels have been used as efficient dye adsorbents from wastewater. This review summarizes cutting-edge research of the last decade of different hydrogels based on natural polysaccharides (chitin, chitosan, cellulose, starch, pullulan, and dextran) concerning their dye adsorption efficiency. Beyond their natural abundance, attributes of polysaccharides such as biocompatibility, biodegradability, and low cost make them not only efficient, but also environmentally sustainable candidates for water purification. The synthesis and dye removal performance together with the effect of diverse factors on gels retaining ability, kinetic, and isotherm models encountered in adsorption studies, are introduced. Thermodynamic parameters, sorbent recycling capacity along with conclusions and future prospects are also presented.

An Updated Overview of Magnetic Composites for Water Decontamination

Water contamination by harmful organic and inorganic compounds seriously burdens human health and aquatic life. A series of conventional water purification methods can be employed, yet they come with certain disadvantages, including resulting sludge or solid waste, incomplete treatment process, and high costs. To overcome these limitations, attention has been drawn to nanotechnology for fabricating better-performing adsorbents for contaminant removal. In particular, magnetic nanostructures hold promise for water decontamination applications, benefiting from easy removal from aqueous solutions. In this respect, numerous researchers worldwide have reported incorporating magnetic particles into many composite materials. Therefore, this review aims to present the newest advancements in the field of magnetic composites for water decontamination, describing the appealing properties of a series of base materials and including the results of the most recent studies. In more detail, carbon-, polymer-, hydrogel-, aerogel-, silica-, clay-, biochar-, metal-organic framework-, and covalent organic framework-based magnetic composites are overviewed, which have displayed promising adsorption capacity for industrial pollutants.

Green preparation of magnetic ferroferric oxide-polyvinyl alcohol-alginate coated UiO-67 nanospheres: Characterization, adsorption properties and adsorption mechanism of methylene blue

In this paper, a kind of magnetic ferric oxide/polyvinyl alcohol/calcium alginate/UiO-67 (Fe3O4/PVA/CA/UiO-67) nanospheres with homogeneous surface interconnecting structures was prepared by using macromolecular polymer polyvinyl alcohol and sodium alginate as carriers and zirconium organic skeleton as nanocrystals. The properties of magnetic nanospheres were studied by SEM, FT-IR, TGA, XRD, BET, VSM and Zeta potential. The impression of diverse temperatures, MB concentrations, interaction time, pH, and magnetic aerogel sphere dose on MB removal was studied. The optimum adsorption temperature and pH of magnetic nanospheres for MB were 298 K, and 10, respectively. Langmuir simulated that the maximum removal of MB by magnetic nanospheres at room temperature (298 K) was 1371.8 mg/g. The removal of MB by magnetic nanospheres complied with the pseudo-first-order kinetic model. The isotherm simulation can infer that the Langmuir model was more comply with MB adsorption on magnetic aerogel spheres. Thermodynamic studies have confirmed that the removal of MB by magnetic nanospheres was exothermic and spontaneous. The interaction mechanism of MB on magnetic nanospheres can be deduced by FT-IR and BET, including hydrogen bond, π-π bond, electrostatic interaction, and mesoporous pore flow. The removal rate of nanospheres for MB still reached 70.06 % after six cycles.

Chitosan Hydrogels for Water Purification Applications

Chitosan-based hydrogels have gained significant attention for their potential applications in water treatment and purification due to their remarkable properties such as bioavailability, biocompatibility, biodegradability, environmental friendliness, high pollutants adsorption capacity, and water adsorption capacity. This article comprehensively reviews recent advances in chitosan-based hydrogel materials for water purification applications. The synthesis methods, structural properties, and water purification performance of chitosan-based hydrogels are critically analyzed. The incorporation of various nanomaterials into chitosan-based hydrogels, such as nanoparticles, graphene, and metal-organic frameworks, has been explored to enhance their performance. The mechanisms of water purification, including adsorption, filtration, and antimicrobial activity, are also discussed in detail. The potential of chitosan-based hydrogels for the removal of pollutants, such as heavy metals, organic contaminants, and microorganisms, from water sources is highlighted. Moreover, the challenges and future perspectives of chitosan-based hydrogels in water treatment and water purification applications are also illustrated. Overall, this article provides valuable insights into the current state of the art regarding chitosan-based hydrogels for water purification applications and highlights their potential for addressing global water pollution challenges.

Preparation and Application of Magnetic Composites Using Controllable Assembly for Use in Water Treatment: A Review

The use of magnetic composites in wastewater treatment has become widespread due to their high flocculating characteristics and ferromagnetism. This review provides an analysis and summary of the preparation and application of magnetic composites through controllable assembly for use in wastewater treatment. The applications of magnetic composites include the treatment of dye wastewater, heavy metal wastewater, microalgae suspensions, and oily wastewater. Additionally, the recycling and regeneration of magnetic composites have been investigated. In the future, further research could be focused on improving the assembly and regeneration stability of magnetic composites, such as utilizing polymers with a multibranched structure. Additionally, it would be beneficial to explore the recycling and regeneration properties of these composites.