Using rhodium as a cathode catalyst for enhancing performance of microbial fuel cell

Innovative Cost-Effective Nano-NiCo2O4 Cathode Catalysts for Oxygen Reduction in Air-Cathode Microbial Electrochemical Systems

Microbial electrochemical systems (MESs) can harvest bioelectricity from varieties of organic matter in wastewater through electroactive microorganisms. Oxygen reduction reaction (ORR) in a cathode plays an important role in guaranteeing high power generation, which can be enhanced by cathode catalysts. Herein, the tiny crystalline grain nanocrystal NiCo₂O₄ is prepared via the economic method and utilized as an effective catalyst in air-cathode MESs. The linear sweep voltammetry results indicate that the current density of 2% nano-NiCo₂O₄/AC cathode (5.05 A/m²) at 0 V increases by 20% compared to the control (4.21 A/m²). The cyclic voltammetries (CVs) and the electrochemical impedance spectroscopy (EIS) showed that the addition of nano-NiCo₂O₄ (2%) is efficient in boosting the redox activity. The polarization curves showed that the MESs with 2% nano-NiCo₂O₄/AC achieved the highest maximum power density (1661 ± 28 mW/m²), which was 1.11 and 1.22 times as much as that of AC and 5% nano-NiCo₂O₄. Moreover, the adulteration of nano-NiCo₂O₄ with a content of 2% can not only enable the electrical activity of the electrode to be more stable, but also reduce the cost for the same power generation in MESs. The synthetic nano-NiCo₂O₄ undoubtedly has great benefits for large-scale MESs in wastewater treatment.

Application of microbial electrochemical technologies for the treatment of petrochemical wastewater with concomitant valuable recovery: A review

Petrochemical industry is one of the major and rapidly growing industry that generates a variety of toxic and recalcitrant organic pollutants as by-products, which are not only harmful to the aquatic animals but also affects human health. The majority of the components of petrochemical wastewater (PW) are carcinogenic, genotoxic and phytotoxic in nature; hence, this complex wastewater generated from different petrochemical processes should be efficiently treated prior to its disposal in natural water bodies. The established technologies like advanced oxidation, membrane bioreactor, electrocoagulation and activated sludge process employed for the treatment of PW are highly energy intensive and incurs high capital and operation cost. Moreover, these technologies are not effective in completely eliminating petroleum hydrocarbons present in PW. Thus, to reduce the energy requirement and also to transform the chemical energy trapped in these organic matters present in this wastewater into bioelectricity and other value-added products, microbial electrochemical technologies (METs) can be efficaciously used, which would also compensate the treatment cost by transforming these pollutants into bioenergy and valuables. In this regard, this review elucidates the feasibility and application of different METs as an appropriate alternative for the treatment of PW. Furthermore, the numerous bottlenecks towards the real-life application and commercialization of pioneering METs have also been articulated.

Advances in the development of electrode materials for improving the reactor kinetics in microbial fuel cells

Microbial fuel cells (MFCs) are an emerging technology for converting organic waste into electricity, thus providing potential solution to energy crises along with eco-friendly wastewater treatment. The electrode properties and biocatalysts are the major factors affecting electricity production in MFC. The electrons generated during microbial metabolism are captured by the anode and transferred towards the cathode via an external circuit, causing the flow of electricity. This flow of electrons is greatly influenced by the electrode properties and thus, much effort has been made towards electrode modification to improve the MFC performance. Different semiconductors, nanostructured metal oxides and their composite materials have been used to modify the anode as they possess high specific surface area, good biocompatibility, chemical stability and conductive properties. The cathode materials have also been modified using metals like platinum and nano-composites for increasing the redox potential, electrical conductivity and surface area. Therefore, this paper reviews the recent developments in the modification of electrodes towards improving the power generation capacity of MFCs.

Proficient Sanitary Wastewater Treatment in Laboratory and Field-Scale Microbial Fuel Cell with Anti-Biofouling Cu0.5Mn0.5Fe2O4 as Cathode Catalyst

For successful field-scale application of microbial fuel cell (MFC), the power recovery from field-scale MFC needs to be improved considerably with simultaneous reduction in its fabrication cost. These problems can be addressed by applying low-cost and efficient cathode catalyst in MFCs. In this regard, Cu0.5Mn0.5Fe2O4 (CuMnFe) was synthesized and applied as cathode catalyst in lab and field-scale MFCs with capacity of 150 ml and 25 l, respectively. Lab-scale MFC having CuMnFe as cathode catalyst demonstrated power density of 176.0 ± 8.2 mW m−2, which was competitive with MFC having Pt as cathode catalyst (183.0 ± 12.6 mW m−2) and it was about seven times higher than control MFC (25.5 ± 4.5 mW m−2) having no catalyst. Application of CuMnFe as cathode catalyst in field-scale MFC produced power density of 7.74 mW m−2, which was three-times higher than the power produced by the field-scale MFC operated without any cathode catalyst (2.58 mW m−2). The cathode catalyst CuMnFe also demonstrated excellent anti-biofouling properties, which in turn improved the power production of field-scale MFC. Therefore, low-cost CuMnFe can be anticipated as an efficacious cathode catalyst for application in MFCs that would produce long term stable higher power, while offering simultaneous treatment to wastewater.

Enhancing the Performance of Microbial Fuel Cell by Using Chloroform Pre-treated Mixed Anaerobic Sludge to Control Methanogenesis in Anodic Chamber

Formation of methane in the anodic chamber of a microbial fuel cell (MFC) indicates an energy inefficiency in electricity generation as the energy required for electrogenesis gets redirected to methanogenesis. The hypothesis of this research is that inhibition of methanogenesis in the mixed anaerobic anodic inoculum is associated with an enhanced activity of the electrogenic bacterial consortia. Hence, the primary objective of this investigation is to evaluate the ability of chloroform to inhibit the methanogenesis at different dosing to enhance the activity of electrogenic consortia in MFC. A higher methane inhibition and hence an enhanced performance of MFC was achieved when mixed anaerobic sludge, collected from septic tank, was used as inoculum after pre-treatment with 0.25% (v/v) chloroform dosing (MFC-0.25CF). The MFC-0.25CF attained a maximum power density of 8.51 W/m3, which was more than twice as that of MFC inoculated with untreated sludge. Also, a clear correlation between the chloroform dosing, methane inhibition, wastewater treatment, and power generation was established, which demonstrated the effectiveness of the technique in enhancing power generation in MFC along with adequate biodegradation of organic matter present in wastewater at an optimum chloroform dosing of 0.25% (v/v) to inhibit methanogenesis.

Improved Performance of Microbial Fuel Cell by In Situ Methanogenesis Suppression While Treating Fish Market Wastewater

The fish market wastewater, which is rich in ammonium concentration, was investigated to explore its ability of in situ suppression of methanogenesis in the anodic chamber of microbial fuel cell (MFC) while treating it and to ensure non-reoccurrence of methanogenic consortia in the anodic chamber during its long-term operations. A lower specific methanogenic activity (0.097g chemical oxygen demand (COD)CH4/g volatile suspended solids (VSS). day) with a higher power density (3.81 ± 0.19 W/m3) was exhibited by the MFC operated with raw fish market wastewater as compared to the MFC fed with synthetic wastewater (0.219g CODCH4/g VSS. day and 1.75 ± 0.09 W/m3, respectively). The enhanced electrochemical activity of anodic biofilm of MFC fed with raw fish market wastewater than the MFC fed with synthetic wastewater further advocated the enhanced electrogenic activity and suppression of methanogenesis, because of the presence of higher ammonium content in the feed. This, in response, reduced the internal resistance (55 Ω), enhanced the coulombic efficiency (21.9 ± 0.3%) and normalized the energy recovery (0.27 kWh/m3) from the MFC fed with fish market wastewater than the MFC fed with synthetic wastewater (92 Ω, 15.7 ± 0.3% and 0.13 kWh/m3, respectively). Thus, while treating the fish market wastewater in the anodic chamber of MFC, any costly and repetitive treatment procedures for anodic microorganisms are not required for suppression of methanogens to ensure higher activity of electrogenic bacteria for higher electricity harvesting.