Influence of platelet-rich plasma on ectopic bone formation of bone marrow stromal cells in porous coral

Ectopic Bone Tissue Engineering in Mice Using Human Gingiva or Bone Marrow-Derived Stromal/Progenitor Cells in Scaffold-Hydrogel Constructs

Three-dimensional (3D) spheroid culture can promote the osteogenic differentiation and bone regeneration capacity of mesenchymal stromal cells (MSC). Gingiva-derived progenitor cells (GPC) represent a less invasive alternative to bone marrow MSC (BMSC) for clinical applications. The aim of this study was to test the in vivo bone forming potential of human GPC and BMSC cultured as 3D spheroids or dissociated cells (2D). 2D and 3D cells encapsulated in constructs of human platelet lysate hydrogels (HPLG) and 3D-printed poly (L-lactide-co-trimethylene carbonate) scaffolds (HPLG-PLATMC) were implanted subcutaneously in nude mice; cell-free HPLG-PLATMC constructs served as a control. Mineralization was assessed using micro-computed tomography (µCT), histology, scanning electron microscopy (SEM) and in situ hybridization (ISH). After 4–8 weeks, µCT revealed greater mineralization in 3D-BMSC vs. 2D-BMSC and 3D-GPC (p < 0.05), and a similar trend in 2D-GPC vs. 2D-BMSC (p > 0.05). After 8 weeks, greater mineralization was observed in cell-free constructs vs. all 2D- and 3D-cell groups (p < 0.05). Histology and SEM revealed an irregular but similar mineralization pattern in all groups. ISH revealed similar numbers of 2D and 3D BMSC/GPC within and/or surrounding the mineralized areas. In summary, spheroid culture promoted ectopic mineralization in constructs of BMSC, while constructs of dissociated GPC and BMSC performed similarly. The combination of HPLG and PLATMC represents a promising scaffold for bone tissue engineering applications.

Bone regeneration in rat calvarial defects using dissociated or spheroid mesenchymal stromal cells in scaffold-hydrogel constructs

Background

Three-dimensional (3D) spheroid culture can promote the osteogenic differentiation of bone marrow mesenchymal stromal cells (BMSC). 3D printing offers the possibility to produce customized scaffolds for complex bone defects. The aim of this study was to compare the potential of human BMSC cultured as 2D monolayers or 3D spheroids encapsulated in constructs of 3D-printed poly-L-lactide-co-trimethylene carbonate scaffolds and modified human platelet lysate hydrogels (PLATMC-HPLG) for bone regeneration.

Methods

PLATMC-HPLG constructs with 2D or 3D BMSC were assessed for osteogenic differentiation based on gene expression and in vitro mineralization. Subsequently, PLATMC-HPLG constructs with 2D or 3D BMSC were implanted in rat calvarial defects for 12 weeks; cell-free constructs served as controls. Bone regeneration was assessed via in vivo computed tomography (CT), ex vivo micro-CT and histology.

Results

Osteogenic gene expression was significantly enhanced in 3D versus 2D BMSC prior to, but not after, encapsulation in PLATMC-HPLG constructs. A trend for greater in vitro mineralization was observed in constructs with 3D versus 2D BMSC (p > 0.05). In vivo CT revealed comparable bone formation after 4, 8 and 12 weeks in all groups. After 12 weeks, micro-CT revealed substantial regeneration in 2D BMSC (62.47 ± 19.46%), 3D BMSC (51.01 ± 24.43%) and cell-free PLATMC-HPLG constructs (43.20 ± 30.09%) (p > 0.05). A similar trend was observed in the histological analysis.

Conclusion

Despite a trend for superior in vitro mineralization, constructs with 3D and 2D BMSC performed similarly in vivo. Regardless of monolayer or spheroid cell culture, PLATMC-HPLG constructs represent promising scaffolds for bone tissue engineering applications.

Supplementary Information

The online version contains supplementary material available at 10.1186/s13287-021-02642-w.

Does PRGF Work? A Prospective Clinical Study in Dogs with A Novel Polylactic Acid Scaffold Injected with PRGF Using the Modified Maquet Technique

Simple Summary

PRGF is a concentration of autologous platelets in a small volume of plasma, which is performed in a specific way and is an accessible resource in veterinary medicine. The PRGF has multiple demonstrated properties as antimicrobial, analgesic and anti-inflammatory but their osteoinductivity potential is controversial. We decided to use PRGF in combination with a PLA bioresorbable scaffold (a specific type of implant with osteoconduction properties) performed by 3D printing, and personalized for each patient, to determinate if the PRGF can produce osteoinduction and as a result, a faster bone healing and a faster patient recovery. Furthermore, in this study PLA scaffolds are proposed as an alternative for metallic implants to avoid the problems that those can cause. The MMT was the technique selected for solving the RCrCL as it is a variant of TTA that follows the same principle for the correction of the patellar tendon angle to neutralize distractive forces; however, this technique needs a lower amount of metallic implants for the scaffold fixation.

Abstract

Tibial tuberosity advancement is a surgical technique to restore the dynamical stability in the knee by advancing the insertion of the patellar ligament, for which it is necessary to advance the tibial crest, being maintained in the desired position usually by a cage and metallic implants. The purpose of this study was to replace the cage with a polylactic acid biodegradable scaffold designed for each patient by 3D printing, inserting platelet-rich in growth factors (PRGF) to demonstrate its osteoinductive properties. To this end, we used the modified Maquet technique to reduce the amount of metal to a minimum. Fifty-three dogs finished the study. The control and PRGF groups did not present any statistically significant differences in terms of ossification degree (p > 0.001) but they demonstrated satisfactory ossification compared to previous publications, although in the PRGF group three of the scaffolds suffered complete reabsorption. The PRGF and control groups did not show any statistically significant differences in terms of lameness degree (p > 0.001). However, the PRGF group showed at the first control some analgesic and anti-inflammatory properties but they were not enough for reducing the functional recovery time in a significant way. The PRGF group did not show any complications or negative results associated with their use.

Osteogenic capacity of diluted platelet-rich plasma in ectopic bone-forming model: Benefits for bone regeneration

Platelet-rich plasma (PRP) with normal and below-normal physiological concentrations of platelets is designated as diluted PRP (dPRP). The aims of this study are to evaluate whether bone mineral matrix in combination with dPRP possesses osteogenic capacity; and whether the differences in dynamics and osteogenic process pattern depend on different platelet concentrations, to what extent, and also what could be benefits for bone regeneration in clinical practice. Three types of implants were made: BMM-bone mineral matrix alone; dPRP/10-bone mineral matrix mixed with dPRP (concentration of platelets 10 times lower than physiological level) and dPRP/3-bone mineral matrix mixed with dPRP (concentration of platelets 3 times lower than physiological level). A subcutaneous implantation model in Balb/c mice was used. The implants were analyzed using expression analysis of bone-related genes, histochemical, immunohistochemical and histomorphometrical analysis. All types of implants induced creation of necessary preconditions for supporting osteogenic processes, but did not induce visible young bone growth. Implant types dPRP/10 and dPRP/3 showed very similar and significantly better stimulatory effects on osteogenic processes than bone matrix alone. In this study, significant ectopic osteogenic potential of concentration of platelets in PRP that are lower than physiological level in blood plasma in combination with bone mineral matrix was demonstrated. Diluted platelet-rich plasma could be a promising and useful adjuvant therapeutic agent in bone regeneration.

Synthetic and Marine-Derived Porous Scaffolds for Bone Tissue Engineering

Bone is a vascularized and connective tissue. The cortical bone is the main part responsible for the support and protection of the remaining systems and organs of the body. The trabecular spongy bone serves as the storage of ions and bone marrow. As a dynamic tissue, bone is in a constant remodelling process to adapt to the mechanical demands and to repair small lesions that may occur. Nevertheless, due to the increased incidence of bone disorders, the need for bone grafts has been growing over the past decades and the development of an ideal bone graft with optimal properties remains a clinical challenge. This review addresses the bone properties (morphology, composition, and their repair and regeneration capacity) and puts the focus on the potential strategies for developing bone repair and regeneration materials. It describes the requirements for designing a suitable scaffold material, types of materials (polymers, ceramics, and composites), and techniques to obtain the porous structures (additive manufacturing techniques like robocasting or derived from marine skeletons) for bone tissue engineering applications. Overall, the main objective of this review is to gather the knowledge on the materials and methods used for the production of scaffolds for bone tissue engineering and to highlight the potential of natural porous structures such as marine skeletons as promising alternative bone graft substitute materials without any further mineralogical changes, or after partial or total transformation into calcium phosphate.

Repair of Osteochondral Defects in a Rabbit Model Using Bilayer Poly(Lactide-co-Glycolide) Scaffolds Loaded with Autologous Platelet-Rich Plasma

BACKGROUND To examine the effects of the addition of autologous platelet-rich plasma (PRP) into bilayer poly(lactide-co-glycolide) (PLGA) scaffolds on the reconstruction of osteochondral defects in a rabbit model. MATERIAL AND METHODS Porous PLGA scaffolds were prepared in a bilayered manner to reflect the structure of chondral and subchondral bone. Bone defects, measuring 4 mm in diameter and 4 mm in thickness, were created in both knee joints in 18 healthy New Zealand white rabbits, aged between 120-180 days old. Rabbits were randomly divided into three groups: rabbits with bone defects implanted with bilayer PLGA scaffolds (PLGA group) (N=6); or with bilayer PLGA and autologous PRP (PLGA/PRP group) (N=6); and the untreated group (control group) (N=6). The gross morphology, histology, and immunohistochemistry for the expression of collagen type II and aggrecan were observed at 12 weeks after surgery and compared using a scoring system. Micro-computed tomography (CT) imaging and relative expression of specific genes were also assessed. RESULTS The platelet concentrations in the PRP samples were found to be 4.9 times greater than that of whole blood samples. The total score on gross appearance and histology was greatest in the PLGA/PRP group, as was the expression of collagen II and aggrecan of the neo-tissue. Micro-CT imaging showed that more subchondral bone was formed in the PLGA/PRP group. CONCLUSIONS Bilayer PLGA scaffolds loaded with autologous PRP improve the reconstruction of osteochondral defects in the rabbit model.

Is there a role of coral bone substitutes in bone repair?

Xenogeneic bone graft materials are an alternative to autologous bone grafting. Among such implants, coralline-derived bone grafts substitutes have a long track record as safe, biocompatible and osteoconductive graft materials. In this review, we present the available literature surrounding their use with special focus on the commercially available graft materials. Corals thanks to their chemical and structural characteristics similar to those of the human cancellous bone have shown great potential but clinical data presented to date is ambiguous with both positive and negative outcomes reported. Correct formulation and design of the graft to ensure adequate osteo-activity and resorption appear intrinsic to a successful outcome.

Repair of segmental load-bearing bone defect by autologous mesenchymal stem cells and plasma-derived fibrin impregnated ceramic block results in early recovery of limb function

Calcium phosphate-based bone substitutes have not been used to repair load-bearing bone defects due to their weak mechanical property. In this study, we reevaluated the functional outcomes of combining ceramic block with osteogenic-induced mesenchymal stem cells and platelet-rich plasma (TEB) to repair critical-sized segmental tibial defect. Comparisons were made with fresh marrow-impregnated ceramic block (MIC) and partially demineralized allogeneic bone block (ALLO). Six New Zealand White female rabbits were used in each study group and three rabbits with no implants were used as negative controls. By Day 90, 4/6 rabbits in TEB group and 2/6 in ALLO and MIC groups resumed normal gait pattern. Union was achieved significantly faster in TEB group with a radiological score of 4.50 ± 0.78 versus ALLO (1.06 ± 0.32), MIC (1.28 ± 0.24), and negative controls (0). Histologically, TEB group scored the highest percentage of new bone (82% ± 5.1%) compared to ALLO (5% ± 2.5%) and MIC (26% ± 5.2%). Biomechanically, TEB-treated tibiae achieved the highest compressive strength (43.50 ± 12.72 MPa) compared to those treated with ALLO (15.15 ± 3.57 MPa) and MIC (23.28 ± 6.14 MPa). In conclusion, TEB can repair critical-sized segmental load-bearing bone defects and restore limb function.

Bone ingrowth and vascular supply in experimental spinal fusion with platelet-rich plasma

STUDY DESIGN

Prospective investigation using a posterolateral spinal fusion (PLSF) model in rabbits.

OBJECTIVE

To assess the effects of platelet-rich plasma (PRP) alone, or with uncultured bone marrow, on bone ingrowth and angiogenesis in experimental PLSF.

SUMMARY OF BACKGROUND DATA

PRP is an autologous substance potentially beneficial to spinal fusion, because it includes several growth factors that may stimulate bone ingrowth and angiogenesis. However, the results of experimental and clinical investigations on the effectiveness of PRP in spinal fusion are controversial. This study was aimed at analyzing the influence of PRP on bone ingrowth and angiogenesis in experimental PLSF.

METHODS

Twenty White New Zealand rabbits underwent PLSF at L4-L5 level. The graft material included a ceramic carrier (Pro-Osteon 500R) loaded, in 7 rabbits, with PRP alone on the right side (group 1A) and with uncultured bone marrow in the left side (group 1B). In 7 rabbits, the ceramic carrier was used alone in the right side (group 2A), and with uncultured bone marrow in the left side (group 2B). Six rabbits (group 3) were sham operated on both right and left sides. Six months after surgery, the lumbar spine was harvested en bloc and evaluated by high-resolution radiographs (Faxitron, Wheeling, IL) and histology.

RESULTS

The radiographical outcome showed a fusion rate of 86% in groups 1A, 1B, and 2B and a fusion rate of 71% in group 2A. No specimen showed a solid fusion in the sham group. Histological analysis revealed new bone formation in the periapophyseal area in groups 1 and 2, but a complete bony bridge between the transverse processes was not observed in any specimen. In all groups, vascular density was significantly greater in the peri- compared with the interapophyseal region. In the PRP group, there was no evidence of increased vascular density in the grafted material compared with the other groups.

CONCLUSION

In experimental PLSF model in rabbits, PRP was not effective in promoting new bone formation and vascularization.