Effect of the microencapsulation of nanoparticles on the reduction of burst release

Bioactive Endodontic Hydrogels: From Parameters to Personalized Medicine

Regenerative endodontic procedures (REPs) aim at recreating dental pulp tissue using biomaterials such as hydrogels. Their bioactivity is mostly related to the nature of biomolecules or chemical compounds that compose the endodontic hydrogel. However, many other parameters, such as hydrogel concentration, bioactive molecules solubility, and apex size, were reported to influence the reciprocal host-biomaterial relationship and hydrogel behavior. The lack of knowledge regarding these various parameters, which should be considered, leads to the inability to predict the clinical outcome and suggests that the biological activity of endodontic hydrogel is impossible to anticipate and could hinder the bench-to-bedside transition. We describe, in this review, that most of these parameters could be identified, described, and studied. A second part of the review lists some challenges and perspectives, including development of future mathematical models that are able to explain, and eventually predict, the bioactivity of endodontic hydrogel used in a clinical setting.

Microstructured Polymer System Containing Proanthocyanidin-Enriched Extract from Limonium brasiliense as a Prophylaxis Strategy to Prevent Recurrence of Porphyromonas gingivalis

Periodontal diseases are a global oral health problem affecting almost 10% of the global population. Porphyromonas gingivalis is one of the main bacteria involved in the initiation and progression of inflammatory processes as a result of the action of the cysteine proteases lysin- and arginine-gingipain. Surelease/polycarbophil microparticles containing a lyophilized proanthocyanidin-enriched fraction from the rhizomes of Limonium brasiliense, traditionally named "baicuru" (ethyl acetate fraction), were manufactured. The ethyl acetate fraction was characterized by UHPLC by the presence of samarangenins A and B (12.10 ± 0.07 and 21.05 ± 0.44%, respectively) and epigallocatechin-3-O-gallate (13.44 ± 0.27%). Physiochemical aspects of Surelease/polycarbophil microparticles were characterized concerning particle size, zeta potential, entrapment efficiency, ethyl acetate fraction release, and mucoadhesion. Additionally, the presence of the ethyl acetate fraction-loaded microparticles was performed concerning potential influence on viability of human buccal KB cells, P. gingivalis adhesion to KB cells, gingipain activity, and P. gingivalis biofilm formation. In general, all Surelease/polycarbophil microparticles tested showed strong adhesion to porcine cheek mucosa (93.1 ± 4.2% in a 30-min test), associated with a prolonged release of the ethyl acetate fraction (up to 16.5 ± 0.8% in 24 h). Preincubation of KB cells with Surelease/polycarbophil microparticles (25 µg/mL) resulted in an up to 93 ± 2% reduced infection rate by P. gingivalis. Decreased activity of the P. gingivalis-specific virulence factors lysin- and arginine-gingipain proteases by Surelease/polycarbophil microparticles was confirmed. Surelease/polycarbophil microparticles decreased biofilm formation of P. gingivalis (97 ± 2% at 60 µg/mL). Results from this study prove the promising activity of Surelease/polycarbophil microparticles containing ethyl acetate fraction microparticles as a prophylaxis strategy to prevent the recurrence of P. gingivalis.

Biomedical applications of PLGA nanoparticles in nanomedicine: advances in drug delivery systems and cancer therapy

INTRODUCTION

During the last decades, the ever-increasing proportion of patients with cancer has been led to serious concerns worldwide. Therefore, the development and use of novel pharmaceuticals, like nanoparticles (NPs)-based drug delivery systems (DDSs), can be potentially effective in cancer therapy.

AREA COVERED

Poly lactic-co-glycolic acid (PLGA) NPs, as a kind of bioavailable, biocompatible, and biodegradable polymers, have approved by the Food and Drug Administration (FDA) for some biomedical and pharmaceutical applications. PLGA is comprised of lactic acid (LA) and glycolic acid (GA) and their ratio could be controlled during various syntheses and preparation approaches. LA/GA ratio determines the stability and degradation time of PLGA; lower content of GA results in fast degradation. There are several approaches for preparing PLGA NPs that can affect their various aspects, such as size, solubility, stability, drug loading, pharmacokinetics, and pharmacodynamics, and so on.

EXPERT OPINION

These NPs have indicated the controlled and sustained drug release in the cancer site and can use in passive and active (via surface modification) DDSs. This review aims to provide an overview of PLGA NPs, their preparation approach and physicochemical aspects, drug release mechanism and the cellular fate, DDSs for efficient cancer therapy, and status in the pharmaceutical industry and nanomedicine.

Folic acid-decorated alginate nanoparticles loaded hydrogel for the oral delivery of diferourylmethane in colorectal cancer

The disease-related suffering in colorectal cancer remains prevalent despite advancements in the field of drug delivery. Chemotherapy-related side effects and non-specificity remain a challenge in drug delivery. The great majority of hydrophobic drugs cannot be successfully delivered to the colon orally mainly due to poor solubility, low bioavailability, pH differences, and food interactions. Polymeric nanoparticles are potential drug delivery candidates but there are numerous limitations to their usefulness in colon cancer. The nanoparticles are removed from the body rapidly by p-glycoprotein efflux, inactivation, or breakdown by enzymes limiting their efficiency. Furthermore, there is a lack of selectivity in targeting cancer cells; nanoparticles may also target healthy cells, resulting in toxicity and adverse effects. The study aimed to use nanoparticles for specific targeting of the colorectal tumor cells via the oral route of administration without adverse effects. Folic acid (FA), a cancer-targeting ligand possessing a high affinity for folate receptors overexpressed in colorectal cancers was conjugated to sodium alginate- nanoparticles by NH₂-linkage. The folic-acid conjugated nanoparticles (FNPs) were delivered to the colon by a pH-sensitive hydrogel synthesized by the free radical polymerization method to provide sustained drug release. The developed system referred to as the "Hydrogel-Nano (HN) drug delivery system," was specifically capable of delivering diferourylmethane to the colon. The HN system was characterized by DLS, FTIR, XRD, TGA, DSC, and SEM. The FNPs size, polydispersity index, and zeta potential were measured. The folic acid-conjugation to nanoparticles' surface was studied by UV-visible spectroscopy using Beer-Lambert's law. In-vitro studies, including sol-gel, porosity, drug loading, entrapment efficiency, etc., revealed promising results. The swelling and release studies showed pH-dependent release of the drug in colonic pH 7.4. Cellular uptake and cytotoxicity studies performed on FR-overexpressed Hela cell lines and FR-negative A-549 cell lines showed facilitated uptake of nanoparticles by folate receptors. A threefold increase in C_max and prolongation of the mean residence time (MRT) to 14.52 +/- 0.217 h indicated sustained drug release by the HN system. The findings of the study can provide a sufficient ground that the synergistic approach of the HN system can deliver hydrophobic drugs to colorectal cancer cells via the oral route, but further in-vivo animal cancer model studies are required.

Genetically Encoded Self-Assembling Protein Nanoparticles for the Targeted Delivery In Vitro and In Vivo

Targeted nanoparticles of different origins are considered as new-generation diagnostic and therapeutic tools. However, there are no targeted drug formulations within the composition of nanoparticles approved by the FDA for use in the clinic, which is associated with the insufficient effectiveness of the developed candidates, the difficulties of their biotechnological production, and inadequate batch-to-batch reproducibility. Targeted protein self-assembling nanoparticles circumvent this problem since proteins are encoded in DNA and the final protein product is produced in only one possible way. We believe that the combination of the endless biomedical potential of protein carriers as nanoparticles and the standardized protein purification protocols will make significant progress in "magic bullet" creation possible, bringing modern biomedicine to a new level. In this review, we are focused on the currently existing platforms for targeted self-assembling protein nanoparticles based on transferrin, lactoferrin, casein, lumazine synthase, albumin, ferritin, and encapsulin proteins, as well as on proteins from magnetosomes and virus-like particles. The applications of these self-assembling proteins for targeted delivery in vitro and in vivo are thoroughly discussed, including bioimaging applications and different therapeutic approaches, such as chemotherapy, gene delivery, and photodynamic and photothermal therapy. A critical assessment of these protein platforms' efficacy in biomedicine is provided and possible problems associated with their further development are described.

The Advancement of Biodegradable Polyesters as Delivery Systems for Camptothecin and Its Analogues-A Status Report

Camptothecin (CPT) has demonstrated antitumor activity in lung, ovarian, breast, pancreas, and stomach cancers. However, this drug, like many other potent anticancer agents, is extremely water-insoluble. Furthermore, pharmacology studies have revealed that prolonged schedules must be administered continuously. For these reasons, several of its water-soluble analogues, prodrugs, and macromolecular conjugates have been synthesized, and various formulation approaches have been investigated. Biodegradable polyesters have gained popularity in cancer treatment in recent years. A number of biodegradable polymeric drug delivery systems (DDSs), designed for localized and systemic administration of therapeutic agents, as well as tumor-targeting macromolecules, have entered clinical trials, demonstrating the importance of biodegradable polyesters in cancer therapy. Biodegradable polyester-based DDSs have the potential to deliver the payload to the target while also increasing drug availability at intended site. The systemic toxicity and serious side-effects associated with conventional cancer therapies can be significantly reduced with targeted polymeric systems. This review elaborates on the use of biodegradable polyesters in the delivery of CPT and its analogues. The design of various DDSs based on biodegradable polyesters has been described, with the drug either adsorbed on the polymer's surface or encapsulated within its macrostructure, as well as those in which a hydrolyzed chemical bond is formed between the active substance and the polymer chain. The data related to the type of DDSs, the kind of linkage, and the details of in vitro and in vivo studies are included.

Development of Fenofibrate/Randomly Methylated β-Cyclodextrin-Loaded Eudragit® RL 100 Nanoparticles for Ocular Delivery

Fenofibrate (FE) has been shown to markedly reduce the progression of diabetic retinopathy and age-related macular degeneration in clinical trials and animal models. Owing to the limited aqueous solubility of FE, it may hamper ocular bioavailability and result in low efficiency to treat such diseases. To enhance the solubility of FE, water-soluble FE/cyclodextrin (CD) complex formation was determined by a phase-solubility technique. Randomly methylated-β-CD (RMβCD) exhibited the best solubility and the highest complexation efficiency (CE) for FE. Additionally, water-soluble polymers (i.e., hydroxypropyl methyl cellulose and polyvinyl alcohol [PVA]) enhanced the solubility of FE/RMβCD complexes. Solid- and solution-state characterizations were performed to elucidate and confirm the formation of inclusion FE/RMβCD complex. FE-loaded Eudragit^® nanoparticle (EuNP) dispersions and suspensions were developed. The physicochemical properties (i.e., pH, osmolality, viscosity, particle size, size distribution, and zeta potential) were within acceptable ranges. Moreover, in vitro mucoadhesion, in vitro release, and in vitro permeation studies revealed that the FE-loaded EuNP eye drop suspensions had excellent mucoadhesive properties and sustained FE release. The hemolytic activity, hen’s egg test on chorioallantoic membrane assay, and in vitro cytotoxicity test showed that the FE formulations had low hemolytic activity, were cytocompatible, and were moderately irritable to the eyes. In conclusion, PVA-stabilized FE/RMβCD-loaded EuNP eye drop suspensions were successfully developed, warranting further in vivo testing.

Determination of the Dissolution/Permeation and Apparent Solubility for Microencapsulated Emamectin Benzoate Using In Vitro and Ex Vivo Salmo salar Intestine Membranes

In this work, two microencapsulation techniques were used to protect and improve the absorption of emamectin benzoate (EB), which is an antiparasitic drug used to control Caligus rogercresseyi. EB has a low aqueous solubility, which affects its absorption in the intestine of Salmo salar. Microparticles were produced by spray drying and ionic gelation, using Soluplus® (EB−SOL) and sodium alginate (EB−ALG) as polymers, respectively. Studies were conducted on dissolution/permeation, apparent permeability (Papp), apparent solubility (Sapp), and absorption using synthetic and biological membranes. Based on these results, the amount of EB in the microparticles needed to achieve a therapeutic dose was estimated. The EB−ALG microparticles outperformed both EB−SOL and free EB, for all parameters analyzed. The results show values of 0.45 mg/mL (80.2%) for dissolution/permeation, a Papp of 6.2 mg/mL in RS−L, an absorption of 7.3% in RS, and a Sapp of 53.1% in EM medium. The EB−ALG microparticles decrease the therapeutic dose necessary to control the parasite, with values of 3.0−2 mg/mL and 1.1−2 mg/mL for EB in EM and RS, respectively. The Korsmeyer−Peppas kinetic model was the best model to fit the EB−ALG and EB−SOL dissolution/permeation experiments. In addition, some of our experimental results using synthetic membranes are similar to those obtained with biological membranes, which suggests that, for some parameters, it is possible to replace biological membranes with synthetic membranes. The encapsulation of EB by ionic gelation shows it is a promising formulation to increase the absorption of the poorly soluble drug. In contrast, the spray-dried microparticles produced using Soluplus® result in even less dissolution/permeation than free EB, so the technique cannot be used to improve the solubility of EB.

Hydrogel Containing Solid Lipid Nanoparticles Loaded with Argan Oil and Simvastatin: Preparation, In Vitro and Ex Vivo Assessment

Transdermal hydrogels have the potential to improve therapeutic outcomes via enhancing bioavailability and reducing toxicity associated with oral delivery. The goal of the present study was to formulate and optimise argan oil loaded transdermal hydrogel containing lipid nanoparticles. The high pressure homogenization (HPH) method was utilised to fabricate Simvastatin loaded solid lipid nanoparticles (SIM-SLNs) with precirol ATO 5 as a lipid core and Poloxamer 407 (P407) to stabilise the core. The optimised nanoformulation was characterised for its particle diameter, zeta potential, surface morphology, entrapment efficiency, crystallinity and molecular interaction. Furthermore, transdermal hydrogel was characterised for physical appearance, rheology, pH, bio adhesion, extrudability, spreadability and safety profile. In vitro and ex vivo assays were executed to gauge the potential of SLNs and argan oil for transdermal delivery. The mean particle size, zeta potential and polydispersity index (PDI) of the optimised nanoparticles were 205 nm, −16.6 mV and 0.127, respectively. Crystallinity studies and Fourier transform infrared (FTIR) analysis revealed no molecular interaction. The in vitro release model explains anomalous non-Fickian release of drug from matrix system. Ex vivo skin penetration studies conducted through a fluorescence microscope confirmed penetration of the formulation across the stratum corneum. Hydrogel plays a crucial role in controlling the burst release and imparting the effect of argan oil as hypolipidemic agent and permeation enhancer.

Sustained release ketamine-loaded porous silicon-PLGA microparticles prepared by an optimized supercritical CO2 process

Ketamine in sub-anaesthetic doses has analgesic properties and an opioid-sparing effect. Intrathecal (i.t.) delivery of analgesics bypasses systemic metabolism and delivers the analgesic agent adjacent to the target receptors in the spinal cord and so small doses are required to achieve effective pain relief. In order to relieve intractable cancer-related pain, sustained-release ketamine formulations are required in combination with a strong opioid because frequent i.t. injection is not practical. In this study, ketamine or ketamine-loaded porous silicon (pSi) were encapsulated into poly(lactic-co-glycolic acid) (PLGA) microparticles by a novel supercritical carbon dioxide (scCO2) method, thereby avoiding the use of organic solvent. Multiple parameters including theoretical drug loading (DL), presence of pSi, size of scCO2 vessel, PLGA type, and use of co-solvent were investigated with a view to obtaining high DL and a sustained-release for an extended period. The most important finding was that the use of a large scCO2 vessel (60 mL) resulted in a much higher encapsulation efficiency (EE) compared with a small vessel (12 mL). In addition, pre-loading ketamine into pSi slightly improved the level of drug incorporation (i.e. EE and DL). Although the in vitro release was mainly affected by the drug payload, the use of the large scCO2 vessel reduced the burst release and extended the release period for PLGA microparticles with 10% or 20% ketamine loading. Together, our findings provide valuable information for optimization of drug delivery systems prepared with the aid of scCO2.

Reliable release testing for nanoparticles with the NanoDis System, an innovative sample and separate technique

One of the critical quality attributes of nanoparticle formulations is drug release. Their release properties should therefore be well characterized with predictive and discriminative methods. However, there is presently still no standard method for the release testing of extended release nanoformulations. Dialysis techniques are widely used in the literature but suffer from severe drawbacks. Burst release of formulations can be masked by slow permeation kinetics of the free drug through the dialysis membrane, saturation in the membrane, and absence of agitation in the membrane. In this study, the release profile of poly(lactic co-glycolic) (PLGA) nanocapsules loaded with all-trans retinoic acid was characterized using an innovative sample and separate set-up, the NanoDis System, and compared to the release profile measured with a dialysis technique. The NanoDis System showed clear superiority over the dialysis method and was able to accurately characterize the burst release from the capsules and furthermore discriminate between different all-trans retinoic acid nanoparticle formulations.

A pH-sensitive nanocarrier based on BSA-stabilized graphene-chitosan nanocomposite for sustained and prolonged release of anticancer agents

Smart nanomaterials with stimuli-responsive behavior are considered as promising platform for various drug delivery applications. Regarding their specific conditions, such as acidic pH, drug carriers to treatment of tumor microenvironment need some criteria to enhance drug delivery efficiency. In this study, for the first time, pH-sensitive BSA-stabilized graphene (BSG)/chitosan nanocomposites were synthesized through electrostatic interactions between the positively charged chitosan nanoparticles and negatively charged BSG and used for Doxorubicin (DOX) encapsulation as a general anticancer drug. Physicochemical characterization of the nanocomposites with different concentrations of BSG (0.5, 2, and 5wt%) showed effective decoration of chitosan nanoparticles on BSG. Comparing DOX release behavior from the nanocomposites and free BSG-chitosan nanoparticles were evaluated at two pHs of 7.4 and 4.5 in 28 days. It was shown that the presence of BSG significantly reduced the burst release observed in chitosan nanoparticles. The nanocomposite of 2wt% BSG was selected as the optimal nanocomposite with a release of 84% in 28 days and with the most uniform release in 24 h. Furthermore, the fitting of release data with four models including zero-order, first-order, Higuchi, and Korsmeyer-Peppas indicated that the addition of BSG changed the release mechanism of the drug, enabling uniform release for the optimal nanocomposite in first 24 h, compared to that for pure chitosan nanoparticles. This behavior was proved using metabolic activity assay of the SKBR-3 breast cancer cell spheroids exposed to DOX release supernatant at different time intervals. It was also demonstrated that DOX released from the nanocomposite had a significant effect on the suppression of cancer cell proliferation at acidic pH.

Development of novel biopolymer-based nanoparticles loaded cream for potential treatment of topical fungal infections

OBJECTIVE

Biodegradable polymers are extensively used due to their efficient safety profiles. The aim of the current study was to fabricate, evaluate, and characterize biodegradable, biocompatible fluconazole (FLZ) loaded chitosan (CHS) chondroitin sulfate (CS) nanoparticles (NPs) for topical delivery. Polymers utilized in the formulation not only served as a carrier system but also aided in fighting with complex etiology of the disease due to their innate antifungal activities.

METHODS

NPs were prepared by the complex coacervation method, then were optimized for various parameters and subsequently loaded into a cream.

RESULTS

Scanning electron microscopic (SEM) analysis showed spherical morphology of the NPs. Prepared NPs showed an average particle size in the range of 350-450 nm and an encapsulation efficiency (EE) of 86%. The polydispersity index (PDI) was found to be 0.148 that showed a uniform distribution of NPs. Fourier transform infrared (FTIR) spectroscopy confirmed the absence of any electrostatic interaction between ingredients. In vitro drug release analyses exhibited a sustained release of the drug and higher antifungal activity than free FLZ. Ex vivo permeability and drug distribution in different skin layers ensured a site-specific delivery of the FLZ-NPs. As compared with free FLZ and other control groups, the prepared NPs also exhibited significantly higher antifungal activity against Candida albicans (p < .01).

CONCLUSION

It was concluded from the results that the FLZ-NPs laden cream could be a potential candidate for topical and site-specific delivery of the drug cargo for the potential treatment of fungal infections.

Hydroxyapatite/NELL-1 Nanoparticles Electrospun Fibers for Osteoinduction in Bone Tissue Engineering Application

Background

As commonly bone defect is a disease of jaw that can seriously affect implant restoration, the bioactive scaffold can be used as potential systems to provide effective repair for bone defect.

Purpose

A osteoinductive bone tissue engineering scaffold has been prepared in order to explore the effect of bioactive materials on bone tissue engineering.

Methods

In this study, NELL-1 nanoparticles (Chi/NNP) and nano hydroxyapatite were incorporated in composite scaffolds by electrospinning and characterized using TEM, SEM, contact angle, tensile tests and in vitro drug release. In vitro biological activities such as MC3T3-E1 cell attachment, proliferation and osteogenic activity were studied.

Results

With the addition of nHA and nanoparticles, the fiber diameter of PCL/BNPs group, PCL/NNPs group and PCL/nHA/NNPs group was significantly increased. Moreover, the hydrophilic hydroxyl group and amino group presented in nHA and nanoparticles had improved the hydrophilicity of the composite fibers. The composite electrospun containing Chi/NNPs can form a double protective barrier which can effectively prolong the release time of NELL-1 growth factor. In addition, the hydroxyapatite/NELL-1 nanoparticles electrospun fibers can promote attachment, proliferation, differentiation of MC3T3-E1 cells and good cytocompatibility, indicating better ability of inducing osteogenic differentiation.

Conclusion

A multi-functional PCL/nHA/NNPs composite fiber with long-term bioactivity and osteoinductivity was successfully prepared by electrospinning. This potential composite could be used as scaffolds in bone tissue engineering application after in vivo studies.

PEGylated-PLGA Nanoparticles Coated with pH-Responsive Tannic Acid-Fe(III) Complexes for Reduced Premature Doxorubicin Release and Enhanced Targeting in Breast Cancer

Biodegradable poly(lactic-co-glycolic acid) nanoparticles (PLGA NPs) have been widely used as delivery vehicles for chemotherapy drugs. However, premature drug release in PLGA NPs can damage healthy tissue and cause serious adverse effects during systemic administration. Here, we report a tannic acid-Fe(III) (Fe^III-TA) complex-modified PLGA nanoparticle platform (DOX-TPLGA NPs) for the tumor-targeted delivery of doxorubicin (DOX). A PEGylated-PLGA inner core and Fe^III-TA complex outer shell were simultaneously introduced to reduce premature drug release in blood circulation and increase pH-triggered drug release in tumor tissue. Compared to the unmodified NPs, the initial burst rate of DOX-TPLGA NPs was significantly reduced by nearly 2-fold at pH 7.4. Moreover, the cumulative drug release rate at pH 5.0 was 40% greater than that at pH 7.4 due to the pH-response of the Fe^III-TA complex. Cellular studies revealed that the TPLGA NPs had enhanced drug uptake and superior cytotoxicity of breast cancer cells in comparison to free DOX. Additionally, the DOX-TPLGA NPs efficiently accumulated in the tumor site of 4T1-bearing nude mice due to the enhanced permeability and retention (EPR) effect and reached a tumor inhibition rate of 85.53 ± 8.77% (1.31-fold versus DOX-PLGA NPs and 3.12-fold versus free DOX). Consequently, the novel TPLGA NPs represent a promising delivery platform to enhance the safety and efficacy of chemotherapy drugs.

A study to enhance the oral bioavailability of s-adenosyl-l-methionine (SAMe): SLN and SLN nanocomposite particles

The endogenous molecule, S-adenosyl-l-methionine (SAMe) is a key factor due to its role in the methylation cycle and modulation of monoaminergic neurotransmission. Since many mental disorders have linked to the monoaminergic system, the level of SAMe in blood and cerebrospinal fluid is important in the treatment of major depression. In this study, solid lipid nanoparticles (SLN) were prepared in order to increase the limited oral bioavailability of SAMe, and SLN based nanocomposite particles (SAMe-SLN-NC) were further developed using an enteric polymer for passive targeting of intestinal lymphatic system. In this manner, it was also aimed to protect SAMe loaded SLN from harsh gastric environment as well as hepatic first-pass metabolism. Dynamic light scattering (DLS) analysis of SLN was performed, drug content was measured, SAMe release patterns were examined and the permeation ability of SAMe was investigated by the Parallel Artificial Membrane Permeability Assay (PAMPA) to characterize SAMe loaded SLN formulation. According to the PAMPA results, SAMe-SLN with the average particle size of 242 nm showed enhanced SAMe permeability in comparison to pure drug. Delayed drug release obtained by SLN nanocomposite particles indicated the protection of drug-loaded SLN in the acidic gastric medium and their intact presence in the intestine. SAMe solution or particle suspensions were prepared using 0.45 (w/v) hydroxypropyl methylcellulose aqueous solution to be applied to groups of animals for pharmacokinetic studies. In vivo pharmacokinetic parameters revealed enhancement in relative bioavailability of SAMe upon oral administration of SLN based formulations. This was attributed to intact absorption of lipid matrix through lymphatic path. A statistically significant increase in SAMe plasma levels was obtained at 15th and 30th minutes with SAMe-SLN and at 2nd and 4th hours with SAMe-SLN-NC. Overall results suggest that SLN is a promising carrier to passive lymphatic targeting of SAMe and novel SLN nanocomposite particles which presented efficient oral bioavailability is a potential way for oral delivery of SAMe and treatment of major depression.

PLGA/PCADK composite microspheres containing hyaluronic acid-chitosan siRNA nanoparticles: A rational design for rheumatoid arthritis therapy

Myeloid cell leukemia-1 (Mcl-1), a member of the Bcl-2 anti-apoptotic family, is overexpressed in the synovial macrophages of patients with rheumatoid arthritis (RA). Small interfering RNA (siRNA) Mcl-1 can induce macrophage apoptosis in the joints and is a potential therapeutic target of RA. Nevertheless, the application of siRNA is limited owing to its instability and susceptibility to degradation in vivo. To address these shortcomings, we developed composite microspheres (MPs) loaded with hyaluronic acid (HA)-chitosan (CS) nanoparticles (NPs). First, we synthesized HA-CS/siRNA NPs (HCNPs) using ionotropic gelation process. Then, HCNPs, as an internal aqueous phase, were loaded into poly (D, L-lactide-co-glycolide) (PLGA) and poly (cyclohexane-1,4-diyl acetone dimethylene ketal) (PCADK) MPs using the double emulsion method. The NPs-in-MPs (NiMPs) composite system provided sustained release of NPs, protected siRNA against nuclease degradation in the serum, and could readily cross the cellular membrane. In addition, we evaluated the advantages of NiMPs in an adjuvant-induced arthritis rat model. Our experimental results demonstrate that NiMPs have greater pharmacodynamic effects than common MPs. Meanwhile, compared with HCNPs, NiMPs reduced the frequency of drug administration. Therefore, NiMPs are a promising and novel siRNA delivery vehicle for RA therapy.

Microwave-Assisted Synthesis, Characterization and Modeling of CPO-27-Mg Metal-Organic Framework for Drug Delivery

The coordination polymer CPO-27-Mg was rapidly synthesized under microwave irradiation. This material exhibits a sufficiently high drug loading towards aspirin (~8% wt.) and paracetamol (~14% wt.). The binding of these two molecules with the inner surface of the metal-organic framework was studied employing the Gaussian and Plane Wave approach of the Density Functional Theory. The structure of CPO-27-Mg persists after the adsorption of aspirin or paracetamol and their desorption energies, being quite high, decrease under solvent conditions.

Solid Lipid Particles for Lung Metastasis Treatment

Solid lipid particles (SLPs) can sustainably encapsulate and release therapeutic agents over long periods, modifying their biodistribution, toxicity, and side effects. To date, no studies have been reported using SLPs loaded with doxorubicin chemotherapy for the treatment of metastatic cancer. This study characterizes the effect of doxorubicin-loaded carnauba wax particles in the treatment of lung metastatic malignant melanoma in vivo. Compared with the free drug, intravenously administrated doxorubicin-loaded SLPs significantly reduce the number of pulmonary metastatic foci in mice. In vitro kinetic studies show two distinctive drug release profiles. A first chemotherapy burst-release wave occurs during the first 5 h, which accounts for approximately 30% of the entrapped drug rapidly providing therapeutic concentrations. The second wave occurs after the arrival of the particles to the final destination in the lung. This release is sustained for long periods (>40 days), providing constant levels of chemotherapy in situ that trigger the inhibition of metastatic growth. Our findings suggest that the use of chemotherapy with loaded SLPs could substantially improve the effectiveness of the drug locally, reducing side effects while improving overall survival.

Development and Characterization of PLGA-Based Multistage Delivery System for Enhanced Payload Delivery to Targeted Vascular Endothelium

Vascular-targeted drug delivery remains an attractive platform for therapeutic and diagnostic interventions in human diseases. This work focuses on the development of a poly-lactic-co-glycolic-acid (PLGA)-based multistage delivery system (MDS). MDS consists of two stages: a micron-sized PLGA outer shell and encapsulated drug-loaded PLGA nanoparticles. Nanoparticles with average diameters of 76, 119, and 193 nm are successfully encapsulated into 3-6 µm MDS. Sustained in vitro release of nanoparticles from MDS is observed for up to 7 days. Both MDS and nanoparticles arebiocompatible with human endothelial cells. Sialyl-Lewis-A (sLe^A ) is successfully immobilized on the MDS and nanoparticle surfaces to enable specific targeting of inflamed endothelium. Functionalized MDS demonstrates a 2.7-fold improvement in endothelial binding compared to PLGA nanoparticles from human blood laminar flow. Overall, the presented results demonstrate successful development and characterization of MDS and suggest that MDS can serve as an effective drug carrier, which can enhance the margination of nanoparticles to the targeted vascular wall.

Casein nanoparticles as oral delivery carriers of mequindox for the improved bioavailability

Mequindox (Meq) is a promising broad-spectrum antibacterial agent, but the clinical application of Meq has been hampered by its low oral bioavailability. Casein (Cas) can bind to a variety of poorly water-soluble drugs to improve their water solubility through a micellar solubilization mechanism. Here, a low-cost and convenient method was introduced to prepare mequindox-loaded casein nanoparticles (Meq-Cas). Meq-Cas was characterized by several methods including differential scanning calorimetry (DSC), X-ray diffraction (XRD), and fourier transform infrared (FTIR) to illuminate the mutual effect between the drug and carriers. Meq-Cas presented nearly spherical nanoparticles with smooth surfaces and its mean particle size was lower than untreated Cas. Meq-Cas showed a nearly complete release of Meq, which displayed a biphasic drug release pattern in both phosphate-buffered solution (PBS) and simulated gastric fluid (SGF). The relative oral bioavailability of Meq-Cas was found to be about 1.20 times higher than that of the animals treated with Meq suspension (control). These results suggest that Cas is a good candidate to load in Meq for pharmaceutical purposes.

Small-Scale Propellers Deliver Miniature Versions of Themselves

Small-scale actuators and propellers have benefited from advances in materials and manufacturing to become more lifelike. Inspired by animal species, multi-generational chemically powered artificial propellers that carry small versions of themselves and deliver them "on-the-fly" are described. The released replicas are capable of autonomous propulsion and propelling immediately after detachment. Release occurs without human involvement and relies solely on sacrificial layers separating the carriers and replicas. These layers are composed of transient natural polymers, which dissolve under the swimming conditions to release the confined replicas. Judicious selection of the responsive transient materials, layer thickness, and solution conditions (e.g., pH), leads to programmable delivery of the replicas. Finally, the ability of the same carrier propellers to carry and transport multiple generations of propellers and deliver them at predetermined times is demonstrated.

Affinity of Serum Albumin and Fibrinogen to Cellulose, Its Hydrophobic Derivatives and Blends

This work describes the preparation of spin-coated thin polymer films composed of cellulose (CE), ethyl cellulose (EC), and cellulose acetate (CA) in the form of bi- or mono-component coatings on sensors of a quartz crystal microbalance with dissipation monitoring (QCM-D). Depending on the composition and derivative, hydrophilicity can be varied resulting in materials with different surface properties. The surfaces of mono- and bi-component films were also analyzed by atomic force microscopy (AFM) and large differences in the morphologies were found comprising nano- to micrometer sized pores. Extended protein adsorption studies were performed by a QCM-D with 0.1 and 10 mg mL⁻¹ bovine serum albumin (BSA) and 0.1 and 1 mg mL⁻¹ fibrinogen from bovine plasma in phosphate buffered saline. Analysis of the mass of bound proteins was conducted by applying the Voigt model and a comparison was made with the Sauerbrey wet mass of the proteins for all films. The amount of deposited proteins could be influenced by the composition of the films. It is proposed that the observed effects can be exploited in biomaterial science and that they can be used to extent the applicability of bio-based polymer thin films composed of commercial cellulose derivatives.

Water-in-Water Emulsion as a New Approach to Produce Mesalamine-Loaded Xylan-Based Microparticles

The water-in-water emulsion method has been reported as a technique able to prepare microparticles without using harmful solvents. However, there are few reports showing the encapsulation of small molecules into microparticles produced within this technique. The probable reason relays on the rapid diffusion of these molecules from the discontinuous phase to the continuous phase. In the present study, xylan microparticles containing mesalamine were produced and the doubled crosslinking approach, used to promote higher encapsulation rates, was disclosed. To achieve this goal, a 23 full factorial design was carried out. The results revealed that all formulations presented spherical-shaped microparticles. However, at specific conditions, only few formulations reached up to 50% of drug loading. In addition, the new xylan-based microparticles formulation retained almost 40% of its drug content after 12 h of a dissolution assay likely due to the degree of crosslinking. Thus, the doubled crosslinking approach used was effective on the encapsulation of mesalamine and may pave the way to successfully produce other polysaccharide-based carriers for clinical use.

Triamcinolone acetonide-loaded PLA/PEG-PDL microparticles for effective intra-articular delivery: synthesis, optimization, in vitro and in vivo evaluation

Nowadays the use of sustainable polymers as poly-lactic acid (PLA) and poly-δ-decalactone (PDL) in drug delivery is advantageous compared to polymers derived from fossil fuels. The present work aimed to produce microparticles (MPs) derived from novel sustainable polymers, loaded with triamcinolone acetonide (TA) for treatment of rheumatoid arthritis via intra-articular (IA) delivery. PDL was synthesized from green δ-decalactone monomers and co-polymerized with methoxy-polyethylene glycol (mPEG) forming PEG-PDL with different molecular weights. The Hansen's solubility parameters were applied to select the most compatible polymer with the drug. An o/w emulsion/solvent evaporation technique was used for MPs fabrication, using 3 [3] full factorial design. Selection of the optimized MPs was performed using Expert Design® software's desirability function. The optimized formulations were characterized using scanning electron microscope, powder X-ray diffraction, differential scanning calorimetry, infrared spectroscopy and in vitro release studies. The inhibition percents of inflammation and histopathological studies were assessed in complete Freund's adjuvant-induced rats' knee joints evaluating the effect of IA injections of selected MPs compared to the free drug suspension. Solubility studies revealed high compatibility and miscibility between TA and PEG-PDL₁₇₀₀, which was blended with PLA for convenient MPs formation. The in vitro characterization studies confirmed the formation of drug-copolymer co-crystals. The in vivo studies ensured the superiority of the newly designed composite MPs in inflammation suppression, compared to the free drug suspension and PLA MPs as well. The present study proved the advantage of using sustainable polymers in a novel combination for effective drug delivery and suggesting its usefulness in designing versatile platforms for therapeutic applications.

Development of novel pH-sensitive nanoparticles loaded hydrogel for transdermal drug delivery

OBJECTIVE

Difference of pH that exists between the skin surface and blood circulation can be exploited for transdermal delivery of drug molecules by loading drug into pH-sensitive polymer. Eudragit S100 (ES100), a pH-sensitive polymer having dissolution profile above pH 7.4, is used in oral, ocular, vaginal and topical delivery of drug molecules. However, pH-sensitive potential of this polymer has not been explored for transdermal delivery. The aim of this research work was to exploit the pH-sensitive potential of ES100 as a nanocarrier for transdermal delivery of model drug, that is, Piroxicam.

METHODS

Simple nanoprecipitation technique was employed to prepare the nanoparticles and response surface quadratic model was applied to get an optimized formulation. The prepared nanoparticles were characterized and loaded into Carbopol 934 based hydrogel. In vitro release, ex vivo permeation and accelerated stability studies were carried out on the prepared formulation.

RESULTS

Particles with an average size of 25-40 nm were obtained with an encapsulation efficiency of 88%. Release studies revealed that nanoparticles remained stable at acidic pH while sustained release with no initial burst effect was observed at pH 7.4 from the hydrogel. Permeation of these nanocarriers from hydrogel matrix showed significant permeation of Piroxicam through mice skin.

CONCLUSION

It can be concluded that ES100 based pH-sensitive nanoparticles have potential to be delivered through transdermal route.

Reduction the Initial-Burst Release of Doxorubicin from Polymeric Depot as a Local Drug Delivery System for Cancer Treatment

A sustained release that can be controllable is an ultimate goal for the delivery of drugs in drug delivery systems including in situ depots. However, one of the major persistent problems in the controlled release delivery system development is the initial burst release of the loaded drug which can minimize the effectiveness of the system. Our primary research objective was to reduce the initial burst release of Doxorubicin (Dox) encapsulated in polymeric depots by incorporating deprotonated Dox into the depots. The drug release profile and cytotoxicity effect of various concentrations of hydrophobic Dox-loaded depots were studied. In the first 24 hours after forming the depots, the release of Dox reached 82.9 ± 0.6% in Dox·HCl depots. Interestingly, the initial burst releases of 5, 10 and 15% wt/wt hydrophobic Dox-loaded PLEC depots were reduced to 48.5 ± 10.0, 29.2 ± 7.8 and 18.9 ± 0.9%, respectively. Moreover, 15% hydrophobic Dox-loaded PLEC depots maintained their stability up to 14 days and their in vitro cytotoxicity ability against human hepatocellular carcinoma cell line (HepG2). Taken together, this study suggested that the presence of hydrophobic Dox in Dox-loaded PLEC depots reduced the initial burst release phenomenon of the drug and the depots still maintained their function as a local drug delivery system.

Highly Controlled Diffusion Drug Release from Ureasil-Poly(ethylene oxide)-Na+-Montmorillonite Hybrid Hydrogel Nanocomposites

In this work, we report the effects of incorporation of variable amounts (1-20 wt %) of sodium montmorillonite (MMT) into a siloxane-poly(ethylene oxide) hybrid hydrogel prepared by the sol-gel route. The aim was to control the nanostructural features of the nanocomposite, improve the release profile of the sodium diclofenac (SDCF) drug, and optimize the swelling behavior of the hydrophilic matrix. The nanoscopic characteristics of the siloxane-cross-linked poly(ethylene oxide) network, the semicrystallinity of the hybrid, and the intercalated or exfoliated structure of the clay were investigated by X-ray diffraction, small-angle X-ray scattering, and differential scanning calorimetry. The correlation between the nanoscopic features of nanocomposites containing different amounts of MMT and the swelling behavior revealed the key role of exfoliated silicate in controlling the water uptake by means of a flow barrier effect. The release of the drug from the nanocomposite displayed a stepped pattern kinetically controlled by the diffusion of SDCF molecules through the mass transport barrier created by the exfoliated silicate. The sustained SDCF release provided by the hybrid hydrogel nanocomposite could be useful for the prolonged treatment of painful conditions, such as arthritis, sprains and strains, gout, migraine, and pain after surgical procedures.

Encoding materials for programming a temporal sequence of actions

Materials are usually synthesized to allow a function that is either independent of time or that can be triggered in a specific environment.

Polymerization-induced self-assembly of large-scale iohexol nanoparticles as contrast agents for X-ray computed tomography imaging

Fundamental research for CT imaging, in which iohexol nanoparticles (INPs) were synthesised using a one-pot strategy via polymerization-induced self-assembly (PISA).

Inkjet printing of antiviral PCL nanoparticles and anticancer cyclodextrin inclusion complexes on bioadhesive film for cervical administration

Personalized medicine is an important treatment approach for diseases like cancer with high intrasubject variability. In this framework, printing is one of the most promising methods since it permits dose and geometry adjustment of the final product. With this study, a combination product consisting of anticancer (paclitaxel) and antiviral (cidofovir) drugs was manufactured by inkjet printing onto adhesive film for local treatment of cervical cancers as a result of HPV infection. Furthermore, solubility problem of paclitaxel was overcome by maintaining this poorly soluble drug in a cyclodextrin inclusion complex and release of cidofovir was controlled by encapsulation in polycaprolactone nanoparticles. In vitro characterization studies of printed film formulations were performed and cell culture studies showed that drug loaded film formulation was effective on human cervical adenocarcinoma cells. Our study suggests that inkjet printing technology can be utilized in the development of antiviral/anticancer combination dosage forms for mucosal application. The drug amount in the delivery system can be accurately controlled and modified. Moreover, prolonged drug release time can be obtained. Printing of anticancer and antiviral drugs on film seem to be a potential approach for HPV-related cervical cancer treatment and a good candidate for further studies.

Doxorubicin-loaded poly (lactic-co-glycolic acid) nanoparticles coated with chitosan/alginate by layer by layer technology for antitumor applications

Natural polyelectrolyte multilayers of chitosan (CHI) and alginate (ALG) were alternately deposited on doxorubicin (DOX)-loaded poly (lactic-co-glycolic acid) (PLGA) nanoparticles (NPs) with layer by layer self-assembly to control drug release for antitumor activity. Numerous factors which influenced the multilayer growth on nano-colloidal particles were studied: polyelectrolyte concentration, NaCl concentration and temperature. Then the growth regime of the CHI/ALG multilayers was elucidated. The coated NPs were characterized by transmission electron microscopy, atomic force microscopy, X-ray diffraction and a zeta potential analyzer. In vitro studies demonstrated an undesirable initial burst release of DOX-loaded PLGA NPs (DOX-PLGA NPs), which was relieved from 55.12% to 5.78% through the use of the layer by layer technique. The release of DOX increased more than 40% as the pH of media decreased from 7.4 to 5.0. More importantly, DOX-PLGA (CHI/ALG)3 NPs had superior in vivo tumor inhibition rates at 83.17% and decreased toxicity, compared with DOX-PLGA NPs and DOX in solution. Thus, the presently formulated PLGA-polyelectrolyte NPs have strong potential applications for numerous controlled anticancer drug release applications.

Sequence-Controlled Delivery of Peptides from Hierarchically Structured Nanomaterials

Peptide drugs delivered orally need to be protected from degradation for achieving their functions. To fulfill the complicated task of oral drug delivery, we present a hierarchically structured drug-delivery system that can undertake structural changes, so multiple functions can be triggered by a sequence of stimuli. Such hierarchical system is achieved in a nanoparticle-in-nanofiber configuration, in which both the nanofibers and the nanoparticles are pH-responsive and biocompatible. A model peptide is efficiently encapsulated under mild condition, and the nanocarriers are further electrospun with a pH-responsive mucoadhesive polymer. The nanoparticles are released from the nanofibers, and thereafter the peptides are released from the nanoparticles in a pH-responsive manner. The nanoparticles are compatible with caco-2 cells, and the endocytosis of the nanoparticles is described in detail.

Responsive copolymer–graphene oxide hybrid microspheres with enhanced drug release properties

Graphene oxide deposited on thermoresponsive copolymer microspheres enhances their barrier diffusion properties and drug release performance.

Design and Concept of Polyzwitterionic Copolymer Microgel Drug Delivery Systems In Situ Loaded with Non-steroidal Anti-inflammatory Ibuprofen

Nowadays, the modern pharmaceutical investigations are directed toward obtaining of new polymer micro- and nano-sized drug delivery carriers. In this respect, the use of hydrogel carriers based on polyzwitterions (PZIs) is an opportunity in the preparation of polymer drug delivery systems with desired characteristics. This paper describes the synthesis and characterization of micro-structured p(VA-co-DMAPS) systems with different compositions in situ loaded with Ibuprofen by emulsifier-free emulsion copolymerization (EEC) in water. The mean size of the prepared microparticles was measured by SEM and particles have been visualized by AFM. The inclusion of Ibuprofen in the polyzwitterionic copolymer microgel systems was established by using DSC. In vitro drug release experiments were carried out in order to estimate the ability of the obtained microgels to modify the release of water-insoluble Ibuprofen.