In vivo efficacy of paclitaxel-loaded injectable in situ-forming gel against subcutaneous tumor growth

Biomimetic mineralized DCPA/ anti-CD47 containing thermo-sensitive injectable hydrogel for bone-metastatic prostate cancer treatment

Strategies that leverage the phagocytic capabilities of M1 macrophages against tumor cells are currently being investigated for cancer treatment. However, the clinical application of these strategies is significantly hampered by the severe side effects associated with conventional M1 macrophage activators. In this study, biomimetic mineralized dicalcium phosphate anhydrous (MDCPA) was synthesized using Zein as an organic template, aiming to promote M1 macrophage polarization effectively while minimizing side effects. In vitro experiments demonstrated that MDCPA can be engulfed by macrophages and induce M1 macrophage polarization. By combining the stimulation of MDCPA with a commonly used immune checkpoint inhibitor, anti-CD47 (aCD47), the macrophages exhibited the highest phagocytic activity toward prostate cancer cells. Further in vivo experiments illustrated significant tumor suppression and reduced bone resorption in a prostate cancer bone metastasis model utilizing MDCPA/aCD47-containing thermos-sensitive injectable hydrogels (MDCPA/aCD47 TSI gel). Mechanistic studies indicated that the MDCPA/aCD47 TSI gel promotes tumor cell apoptosis not only through the phagocytosis of tumor cells mediated by M1 macrophages, but also by activating anti-tumor CD8-positive T cells. Consequently, this composite gel platform presents an effective theragnostic strategy for treating prostate cancer bone metastasis without the associated side effects, facilitated by biomimetic minerals that mediate anti-tumor immunity.

Evaluation of thermosensitive chitosan hydrogel containing gefitinib loaded cellulose acetate butyrate nanoparticles in a subcutaneous breast cancer model

In the present study, gefitinib loaded cellulose acetate butyrate nanoparticles (Gnb-NPs) were prepared and then incorporated into thermo-sensitive chitosan/β-glycerophosphate hydrogels for intratumoral administration in mice bearing breast cancer. Accordingly, Gnb-NPs were prepared using the solvent evaporation process and optimized by applying a two-level fractional factorial design. Properties of NPs, including particle size, zeta potential (ZP), polydispersity index (PdI), encapsulation efficiency (EE) % and drug loading (DL) %, were investigated; the optimized Gnb-NPs were then loaded in chitosan hydrogels (Gnb-NPs-Hydrogel). The formulated Gnb-NPs-Hydrogel was assessed in terms of gelling time, release behavior, injectability, swelling and degradation behavior. The anti-cancer efficacy of Gnb-NPs-Hydrogel was evaluated in vitro against the 4 T1 breast cancer cell line and in vivo in breast tumor bearing mice. The optimized formulation showed spherical particles with the size of 156.50 ± 2.40 nm, PdI of 0.20 ± 0.002, ZP of -4.90 ± 0.04 mV, EE of 99.77 ± 0.09 % and DL of 20.59 ± 0.05 %. Incorporating Gnb-NPs into the hydrogel led to the decrease of the drug release rate. Gnb-NPs-Hydrogel displayed a greater cytotoxic effect in comparison to the free Gnb and Gnb-Hydrogel in 4 T1 cancer cells. Furthermore,intratumorallyinjectedGnb-NPs-Hydrogel showed the strongest antitumor efficacy in vivo. The superior performance of Gnb-NPs-Hydrogel, thus, demonstrated its potential for the treatment of breast cancer.

Promising Polymeric Drug Carriers for Local Delivery: The Case of in situ Gels

BACKGROUND

At present, the controlled local drug delivery is a very promising approach compared to systemic administration, since it mostly targets the affected tissue. In fact, various drug carriers for local delivery have been prepared with improved therapeutic efficacy.

OBJECTIVE

in situ polymer gels are drug delivery systems that not only present liquid characteristics before their administration in body, but once they are administered, form gels due to gelation. Their gelation mechanism is due to factors such as pH alteration, temperature change, ion activation or ultraviolet irradiation. in situ gels offer various advantages compared to conventional formulations due to their ability to release drugs in a sustainable and controllable manner. Most importantly, in situ gels can be used in local drug delivery applications for various diseases.

METHODS

This review includes the basic knowledge and theory of in situ gels as well as their various applications according to their administration route.

RESULTS

Various natural, semisynthetic, and synthetic polymers can produce in situ polymeric gels. For example, natural polysaccharides such as alginic acid, chitosan, gellan gum, carrageenan etc. have been utilized as in situ gels for topical delivery. Besides the polysaccharides, poloxamers, poly(Nisopropylacrylamide), poly(ethyleneoxide)/ (lactic-co-glycolic acid), and thermosensitive liposome systems can be applied as in situ gels. In most cases, in situ polymeric gels could be applied via various administration routes such as oral, vaginal, ocular, intranasal and injectable.

CONCLUSION

To conclude, it can be revealed that in situ gels could be a promising alternative carrier for both chronic and immediate diseases.

Hydrogel microspheres for spatiotemporally controlled delivery of RNA and silencing gene expression within scaffold-free tissue engineered constructs

Delivery systems for controlled release of RNA interference (RNAi) molecules, including small interfering (siRNA) and microRNA (miRNA), have the potential to direct stem cell differentiation for regenerative musculoskeletal applications. To date, localized RNA delivery platforms in this area have focused predominantly on bulk scaffold-based approaches, which can interfere with cell-cell interactions important for recapitulating some native musculoskeletal developmental and healing processes in tissue regeneration strategies. In contrast, scaffold-free, high density human mesenchymal stem cell (hMSC) aggregates may provide an avenue for creating a more biomimetic microenvironment. Here, photocrosslinkable dextran microspheres (MS) encapsulating siRNA-micelles were prepared via an aqueous emulsion method and incorporated within hMSC aggregates for localized and sustained delivery of bioactive siRNA. siRNA-micelles released from MS in a sustained fashion over the course of 28 days, and the released siRNA retained its ability to transfect cells for gene silencing. Incorporation of fluorescently labeled siRNA (siGLO)-laden MS within hMSC aggregates exhibited tunable siGLO delivery and uptake by stem cells. Incorporation of MS loaded with siRNA targeting green fluorescent protein (siGFP) within GFP-hMSC aggregates provided sustained presentation of siGFP within the constructs and prolonged GFP silencing for up to 15 days. This platform system enables sustained gene silencing within stem cell aggregates and thus shows great potential in tissue regeneration applications. STATEMENT OF SIGNIFICANCE: This work presents a new strategy to deliver RNA-nanocomplexes from photocrosslinked dextran microspheres for tunable presentation of bioactive RNA. These microspheres were embedded within scaffold-free, human mesenchymal stem cell (hMSC) aggregates for sustained gene silencing within three-dimensional cell constructs while maintaining cell viability. Unlike exogenous delivery of RNA within culture medium that suffers from diffusion limitations and potential need for repeated transfections, this strategy provides local and sustained RNA presentation from the microspheres to cells in the constructs. This system has the potential to inhibit translation of hMSC differentiation antagonists and drive hMSC differentiation toward desired specific lineages, and is an important step in the engineering of high-density stem cell systems with incorporated instructive genetic cues for application in tissue regeneration.

An injectable thermosensitive hydrogel self-supported by nanoparticles of PEGylated amino-modified PCL for enhanced local tumor chemotherapy

We synthesized amino-modified poly(ε-caprolactone) PCN-b-PEG-b-PCN (PECN) triblock copolymers and studied the contribution of the introduced amino groups to the drug delivery efficiency of PECN nanoparticles (NPs) and their injectable thermosensitive hydrogels. PECN15 with an optimal amino group content was obtained. Firstly, the hydrophobic drug paclitaxel (PTX) was loaded into PECN15 up to 5.91% and formed PTX/PECN NPs 90 nm in size and with a slightly positive charge (7.3 mV). Furthermore, the injectable PTX/PECN NPs aqueous solution (25 wt%) at ambient temperature could undergo fast gelation at 37 °C and sustainedly release PTX/PECN NPs in 10 days. More importantly, compared with our previously reported PECT NPs, the PECN NPs without an increase in toxicity could improve the cell uptake and enhance intracellular drug release by responding to the acidic environment of the endosome. Thus, the PTX/PECN NPs presented a lower IC50 of 3.14 μg mL-1 than that of the PTX/PECT NPs (7.67 μg mL-1) and free PTX (4.65 μg mL-1). Moreover, through peritumoral injection, the PTX/PECNGel showed 94.27% inhibition rate of tumor growth on day 19, higher than PTX/PECTGel (72.28%) and Taxol® (47.03%). Therefore, the PECN NPs hydrogel provided a more effective injectable platform to enhance local cancer chemotherapy, and also provided the possibility of further functionalization by the reactive amino groups.

Doxorubicin Loaded Poloxamer Thermosensitive Hydrogels: Chemical, Pharmacological and Biological Evaluation

(1) Background: doxorubicin is a potent chemotherapeutic agent, but it has limitations regarding its side effects and therapy resistance. Hydrogels potentially deal with these problems, but several characterizations need to be optimized to better understand how hydrogel assisted chemotherapy works. Poloxamer 407 (P407) hydrogels were mixed with doxorubicin and physico-chemical, biological, and pharmacological characterizations were considered. (2) Methods: hydrogels were prepared by mixing P407 in PBS at 4 °C. Doxorubicin was added upon solutions became clear. Time-to-gelation, hydrogel morphology, and micelles were studied first. The effects of P407-doxorubicin were evaluated on MC-38 colon cancer cells. Furthermore, doxorubicin release was assessed and contrasted with non-invasive in vivo whole body fluorescence imaging. (3) Results: 25% P407 had favorable gelation properties with pore sizes of 30–180 µm. P407 micelles were approximately 5 nm in size. Doxorubicin was fully released in vitro from 25% P407 hydrogel within 120 h. Furthermore, P407 micelles strongly enhanced the anti-neoplastic effects of doxorubicin on MC-38 cells. In vivo fluorescence imaging revealed that hydrogels retained fluorescence signals at the injection site for 168 h. (4) Conclusions: non-invasive imaging showed how P407 gels retained drug at the injection site. Doxorubicin P407 micelles strongly enhanced the anti-tumor effects.

Self-Assemblable Polymer Smart-Blocks for Temperature-Induced Injectable Hydrogel in Biomedical Applications

Self-assembled temperature-induced injectable hydrogels fabricated via self-assembly of polymer smart-blocks have been widely investigated as drug delivery systems and platforms for tissue regeneration. Polymer smart-blocks that can be self-assembly play an important role in fabrication of hydrogels because they can self-assemble to induce the gelation of their copolymer in aqueous solution. The self-assembly occurs in response to an external stimulus change, such as temperature, pH, glucose, ionic strength, light, magnetic field, electric field, or their combination, which results in property transformations like hydrophobicity, ionization, and conformational change. The self-assembly smart-block based copolymers exist as a solution in aqueous media at certain conditions that are suitable for mixing with bioactive molecules and/or cells. However, this solution turns into a hydrogel due to the self-assembly of the smart-blocks under exposure to an external stimulus change in vitro or injection into the living body for a controllable release of loaded bioactive molecules or serving as a biomaterial scaffold for tissue regeneration. This work reports current scenery in the development of these self-assembly smart-blocks for fabrication of temperature-induced injectable physically cross-linked hydrogels and their potential application as drug delivery systems and platforms for tissue engineering.

Paclitaxel

Paclitaxel is the first microtubule-stabilizing agent identified and considered to be the most significant advance in chemotherapy of the past two decades. It is considered one of the most widely used antineoplastic agents with broad activity in several cancers including breast cancer, endometrial cancer, non-small-cell lung cancer, bladder cancer, and cervical carcinoma. It is also used for treating AIDS-related Kaposi sarcoma as a second line treatment. This comprehensive profile of paclitaxel gives overview of nomenclature, formulae, elemental analysis, appearance, application and uses. In addition, mechanism of action and resistance, different dosage forms and methods of drug preparation are elaborated. Moreover, the physicochemical properties involving X-ray powder diffraction pattern, drug solubility, melting point, differential scanning calorimetry, and stability were summarized. Furthermore, method of drug analysis including compendial, spectrophotometric, and chromatographic was discussed.

Evaluation of micelles incorporated into thermosensitive hydrogels for intratumoral delivery and controlled release of docetaxel: A dual approach for in situ treatment of tumors

The in situ gelling hybrid hydrogel system has been reported to effectively concentrate chemotherapeutic drugs at the tumor site and sustain their release for a long period. DTX-micelles (docetaxel-loaded mixed micelles) are able to increase the solubility of DTX in water, and then a high drug loading rate of hydrogels can be achieved by encapsulating the docetaxel-loaded mixed micelles into the hydrogels. The thermosensitive nature of DTX-MM-hydrogels (thermosensitive hydrogels incorporated with docetaxel-loaded mixed micelles) can accelerate the formation of a depot of this drug-loaded system at the site of administration. Therefore, the hydrogels provide a much slower release compared with DTX-micelles and DTX-injection. An in vivo retention study has demonstrated that the DTX-MM-hydrogels can prolong the drug retention time and in vivo trials have shown that the DTX-MM-hydrogels have a higher antitumor efficacy and systemic safety. In conclusion, the DTX-MM-hydrogels prepared in this study have considerable potential as a drug delivery system, with higher tumor inhibition effects and are less toxic to normal tissues.

Quality by design approach to optimize the formulation variables influencing the characteristics of biodegradable intramuscular in-situ gel loaded with alendronate sodium for osteoporosis

There are many challenges facing the use of alendronate sodium for the treatment of osteoporosis such as low bioavailability of 0.6% and oesophageal ulceration with bleeding. Due to the aforementioned limitation, the main objective of this research is to utilize a statistical experimental design in the formulation and optimization of alendronate in the form of controlled release biodegradable intramuscular in-situ gel. A Box–Behnken experimental design employing Statgraphics® software was used to develop an optimized in-situ gel formulation and to estimate the effects of Poly-DL-lactide-coglycolide as a primary polymer, the copolymer polycaprolactone, and lipid surfactant capryol 90. Every system was evaluated for gellation character, and in vitro release. As a novel technique for evaluation of the in-situ gel, in-vivo biodegradability rate was estimated in rats. Pharmacokinetic parameters were assessed in rabbits. The results indicated a significant effect of the copolymer and lipid surfactant on initial burst, and a significant effect of the primary and copolymer on drug percentage released. The optimum formulation showed a 5% initial burst, an in-vivo biodegradability rate estimated at 8% every seven days in rats, and the pharmacokinetic evaluation revealed that alendronate sodium mean residence time extended to 102 days in rabbits. In conclusion, the optimum biodegradable intramuscular in-situ gel formulations is a promising approach for providing higher bioavailability, extended release for more than three months, with elimination of esophageal side effects.

Local delivery of doxorubicin through supramolecular peptide amphiphile nanofiber gels

Peptide amphiphiles (PAs) self-assemble into supramolecular nanofiber gels that provide a suitable environment for encapsulation of both hydrophobic and hydrophilic molecules. The PA gels have significant advantages for controlled delivery applications due to their high capacity to retain water, biocompatibility, and biodegradability. In this study, we demonstrate injectable supramolecular PA nanofiber gels for drug delivery applications. Doxorubicin (Dox), as a widely used chemotherapeutic drug for breast cancer treatment, was encapsulated within the PA gels prepared at different concentrations. Physical and chemical properties of the gels were characterized, and slow release of the Dox molecules through the supramolecular PA nanofiber gels was studied. In addition, the diffusion constants of the drug molecules within the PA nanofiber gels were estimated using fluorescence recovery after the photobleaching (FRAP) method. The PA nanofiber gels did not show any cytotoxicity and the encapsulation strategy enhanced the activity of drug molecules on cellular viability through prolonged release compared to direct administration under in vitro conditions. Moreover, the local in vivo injection of the Dox encapsulated PA nanofiber gels (Dox/PA) to the tumor site demonstrated the lowest tumor growth rate compared to the direct Dox injection and increased the apoptotic cells within the tumor tissue for local drug release through the PA nanofiber gels under in vivo conditions.

N-Butyl-2-cyanoacrylate-based injectable and in situ-forming implants for efficient intratumoral chemotherapy

The local delivery of chemotherapeutic drugs to tumor sites is an effective approach for achieving therapeutic drug concentrations in solid tumors. Injectable implants with the ability to form in situ represent one of the most promising technologies for intratumoral chemotherapy. However, many issues must be resolved before these implants can be applied in clinical practice. Herein, we report a novel injectable in situ-forming implant system composed of n-butyl-2-cyanoacrylate (NBCA) and ethyl oleate, and the sol–gel phase transition is activated by anions in body fluids or blood. This newly developed injectable NBCA ethyl oleate implant (INEI) is biodegradable, biocompatible, and non-toxic. INEI solidifies in several seconds after exposure to body fluids or blood, and the implant’s in vivo degradation time can be controlled. In addition, the pore sizes formed by the polymerization of NBCA can be decreased by increasing the NBCA concentration in the implants. Therefore, the drug retention/release time can be adjusted from a few weeks to several months by changing the concentration of NBCA in the implant formulation. Anti-tumor experiments in animal models showed that the average growth inhibition rate of xenografted human breast cancer cells by the paclitaxel-loaded INEI (40% NBCA) was 80%, and they also indicated that tumors in some of the mice were completely eliminated by just a single dosage injection. For the epirubicin-loaded INEI (50% NBCA), the average growth inhibition rate of xenografted human liver cancer cells was 58%. Thus, the chemotherapeutic drug-loaded INEIs exhibited excellent therapeutic efficacy for local chemotherapy.

Synergistic locoregional chemoradiotherapy using a composite liposome-in-gel system as an injectable drug depot

The use of radiosensitizers in clinical radiotherapy is limited by systemic toxicity. The biopolymeric, biodegradable, injectable liposome-in-gel-paclitaxel (LG-PTX) system was developed for regional delivery of the radiosensitizer paclitaxel (PTX), and its efficacy was evaluated with concurrent fractionated radiation. LG-PTX is composed of nano-sized drug-loaded fluidizing liposomes, which are incorporated into a porous biodegradable gellan hydrogel. This allows enhanced drug permeation while maintaining a localization of the drug depot. LG-PTX had an IC₅₀ of 325±117 nM in B16F10 melanoma cells, and cytotoxicity with concurrent doses of fractionated radiation showed significant increase in apoptotic cells (75%) compared to radiation (39%) or LG-PTX (43%) alone. Peri-tumoral injection in tumor-bearing mice showed PTX localization in the tumor 2 hours after administration, with no drug detected in plasma or other organs. LG-PTX administration with doses of focal radiation (5×3 Gy) significantly reduced tumor volumes compared to control (6.4 times) and radiation alone (1.6 times) and improved animal survival. LG-PTX thus efficiently localizes the drug at the tumor site and synergistically enhances the effect of concurrent radiotherapy. This novel liposome-in-gel system can potentially be used as a platform technology for the delivery of radiosensitizing drugs to enhance the efficacy of chemoradiotherapy.

Influence of surface passivation of 2-Methoxyestradiol loaded PLGA nanoparticles on cellular interactions, pharmacokinetics and tumour accumulation

In the present work, 2-Methoxyestradiol [2ME2] loaded PLGA nanoparticles [NPs] were stabilized with Casein or poly(ethylene glycol) [PEG] and evaluated for its cellular interactions, pharmacokinetics and tumour accumulation. Surface stabilized PLGA nanoparticles prepared through a modified emulsion route possessed similar size, surface charge, drug loading and release characteristics. Particle-cell interactions as well as the anti-angiogenesis activity were similar for both nanoformulations in vitro. However, in vivo pharmacokinetics and tumour accumulation of the drug were substantially improved for the PEGylated nanoformulation. Reduced protein binding was observed for PEG stabilized PLGA NPs. Thus, it was demonstrated that nanoencapsulation of 2-ME2 within PEGylated PLGA nanocarrier could improve its half-life and plasma concentration and thereby increase the tumour accumulation.

Macroporous acrylamide phantoms improve prediction of in vivo performance of in situ forming implants

In situ forming implants (ISFIs) have shown promise as a sustained, local drug delivery system for therapeutics in a variety of applications. However, development of ISFIs has been hindered by poor correlation between in vitro study results and in vivo performance. In contrast to oral dosage forms, there is currently no clear consensus on a standard for in vitro drug dissolution studies for parenteral formulations. Recent studies have suggested that the disparity between in vivo and in vitro behavior of phase-inverting ISFIs may be, in part, due to differences in injection site stiffness. Accordingly, this study aimed to create acrylamide-based hydrogel phantoms of varying porosity and stiffness, which we hypothesized would better predict in vivo performance. Implant microstructure and shape were found to be dependent on the stiffness of the phantoms, while drug release was found to be dependent on both phantom porosity and stiffness. Specifically, SEM analysis revealed that implant porosity and interconnectivity decreased with increasing phantom stiffness and better mimicked the microstructure seen in vivo. Burst release of drug increased from 31% to 43% when in standard acrylamide phantoms vs macroporous phantoms (10kPa), improving the correlation to the burst release seen in vivo. Implants in 30kPa macroporous phantoms had the best correlation with in vivo burst release, significantly improving (p<0.05) the burst release relative to in vivo from 64%, using a standard PBS dissolution method, to 92%. These findings confirm that implant behavior is affected by injection site stiffness. Importantly, with appropriate optimization and validation, hydrogel phantoms such as the one investigated here could be used to improve the in vitro-in vivo correlation of in situ forming implant formulations and potentially augment their advancement to clinical use.

Functionalized graphene oxide-based thermosensitive hydrogel for near-infrared chemo-photothermal therapy on tumor

PURPOSE

A functionalized graphene oxide-based thermosensitive hydrogel loaded with docetaxel for intratumoral delivery was designed to enhance therapeutic efficacy and alleviate system toxicity.

METHODS

First, graphene oxide was functionalized with chitosan to acquire high stability in physiological solutions. And then docetaxel-graphene oxide/chitosan gel was formed by mixed docetaxel-graphene oxide/chitosan suspension with hydrogel which was made from Poloxamer 407 and Poloxamer 188. Cellular uptake, antitumor effect in vitro and in vivo, cell apoptosis, and biodistribution of docetaxel-graphene oxide/chitosan gel were investigated, compared with the docetaxel solution.

RESULTS

Graphene oxide/chitosan was stable in physiological solution, and docetaxel released much slower from docetaxel-graphene oxide/chitosan gel with a pH-responsive feature. Compared with free docetaxel, docetaxel-graphene oxide/chitosan could afford higher antitumor efficacy in Michigan Cancer Foundation-7 (MCF-7) cells in vitro. Furthermore, docetaxel-grapheme oxide/chitosan gel which was injected within tumor could afford higher concentration and longer resident time in tumor tissues of mice in vivo, without obvious toxic effects to normal organs. Meanwhile, the combination of near-infrared laser irradiation at 808 nm significantly enhanced tumor inhibition in vitro and in vivo.

CONCLUSIONS

Docetaxel-graphene oxide/chitosan gel in combination with 808 nm near-infrared laser irradiation had great potential for cancer chemo-photothermal therapy.

Study of an injectable in situ forming gel for sustained-release of Ivermectin in vitro and in vivo

The purpose of this study was to develop an in situ forming gel based on SAIB-PLA composite matrix depot for sustained release of Ivermectin. The burst release and cumulative release were significantly reduced with the increased content of solvents and the minimum burst release and cumulative release were found in formulations with NMP. With the addition of PLA in the NMP based gel, burst release and cumulative release were reduced. When concentration of IVM raised from 1% to 2% and 4%, cumulative release was 2.4-2.9 and 3.1-3.7 times that of 1%. The optimal prescription displayed a slow in vitro release rate with 10.46% burst release and 80% cumulative release in 80 days. Pharmacokinetic results indicate that the effective blood concentration of the gel could be maintained up to 110-120 days, t1/2λz of the gels was (24.37 ± 1.71) days and MRT was (32.86 ± 0.91) days.

Preparation and characterization of amphiphilic calixarene nanoparticles as delivery carriers for paclitaxel

Two types of amphoteric calix[n]arene carboxylic acid (CnCA) derivative, i.e., calix[6]arene hexa-carboxylic acid (C6HCA) and calix[8]arene octo-carboxylic acid (C8OCA), were synthesized by introducing acetoxyls into the hydroxyls of calix[n]arene (n=6, 8). C6HCA and C8OCA nanoparticles (NPs) were prepared successfully using the dialysis method. CnCA NPs had regular spherical shapes with an average diameter of 180-220 nm and possessed negative charges of greater than -30 mV. C6HCA and C8OCA NPs were stable in 4.5% bovine serum albumin solutions and buffers (pH 5-9), with a low critical aggregation concentration value of 5.7 mg·L(-1) and 4.0 mg·L(-1), respectively. C6HCA and C8OCA NPs exhibited good paclitaxel (PTX) loading capacity, with drug loading contents of 7.5% and 8.3%, respectively. The overall in vitro release behavior of PTX from the CnCA NPs was sustained, and C8OCA NPs had a slower release rate compared with C6HCA NPs. These favorable properties of CnCA NPs make them promising nanocarriers for tumor-targeted drug delivery.

Engineered in-situ depot-forming hydrogels for intratumoral drug delivery

Chemotherapy is the traditional treatment for intermediate and late stage cancers. The search for treatment options with minimal side effects has been ongoing for several years. Drug delivery technologies that result in minimal or no side effects with improved ease of use for the patients are receiving increased attention. Polymer drug conjugates and nanoparticles can potentially offset the volume of drug distribution while enhancing the accumulation of the active drug in tumors thereby reducing side effects. Additionally, development of localized drug delivery platforms is being investigated as another key approach to target tumors with minimal or no toxicity. Development of in-situ depot-forming gel systems for intratumoral delivery of immuno-oncology actives can enhance drug bioavailability to the tumor site and reduce systemic toxicity. This field of drug delivery is critical to develop given the advent of immunotherapy and the availability of novel biological molecules for treating solid tumors. This article reviews the advances in the field of engineered in-situ gelling platforms as a practical tool for local delivery of active oncolytic agents to tumor sites.

Biodegradable poly(lactide-co-glycolide-co-ε-caprolactone) block copolymers - evaluation as drug carriers for a localized and sustained delivery system

To develop an appropriate drug carrier for drug delivery systems, we prepared random poly(lactide-co-glycolide-co-ε-caprolactone) (PLGC) copolymers in comparison to commercial poly(lactic acid-co-glycolic acid) (PLGA) grades. The molecular weights of PLGC copolymers varied from 20k to 90k g mol^-1 in the total polyester segments, when poly-l-lactic acid (PLLA), polyglycolic acid (PGA), and polycaprolactone (PCL) compositions were kept constant. The lengths of PLGC copolymers varied from 10 : 10 : 80 to 40 : 40 : 20 in the PLLA : PGA : PCL segments, when the molecular weights of the total polyester segments were kept constant. The crystalline properties of the PLGA copolymers can be changed to amorphous by the incorporation of PCL segments. In vitro and in vivo degradation behavior can be easily tuned from a few days to a few weeks by changing the chemical composition of the PLGC copolymers. The in vivo inflammation associated with the PLGC implants was less pronounced than that associated with PLGA. In this study, as drug delivery carriers for locally implantable paclitaxel (Ptx) dosages, Ptx-loaded PLGC and PLGA films showed in vitro and in vivo Ptx release for 35 days. The orders of Ptx release showed profiles similar to those of in vitro and in vivo degradation of PLGC. Using near-infrared (NIR) fluorescence imaging, we confirmed the sustained release of NIR over an extended period from IR-780-loaded PLGC and PLGA implanted in live animals. In conclusion, we confirmed that compared to PLGA, PLGC effectively acts as a drug carrier for drug delivery systems.

Modified biopolymer-dextrin based crosslinked hydrogels: application in controlled drug delivery

This review describes hydrogels and their classifications along with the synthesis and properties of biopolymer-dextrin based crosslinked hydrogels towards potential application in controlled drug delivery.

A novel doxorubicin-loaded in situ forming gel based high concentration of phospholipid for intratumoral drug delivery

The purpose of this study was to develop a safe and effective drug delivery system for local chemotherapy. A novel injectable in-situ-forming gel system was prepared using small molecule materials, including phospholipids, medium chain triglycerides (MCTs), and ethanol. Thus, this new sustained release system was named PME (first letter of phospholipids, MCT, and ethanol). PME has a well-defined molecule structure, a high degree of safety, and better biocompatible characteristics. It was in sol state with low viscosity in vitro and turned into a solid or semisolid gel in situ after injection. When loaded with doxorubicin (Dox), PME-D (doxorubicin-loaded PME) exhibited notably antitumor efficiency in S180 sarcoma tumors bearing mice after a single intratumoral injection. In vitro, PME-D had remarkable antiproliferative efficacies against MCF-7 breast cancer cells for over 5 days. Moreover, the initial burst effect can hardly be observed from PME system, which was different from many other in-situ-forming gels. The in vivo biodistribution study showed the high Dox concentration in tumors compared with other major organs after PME-D intratumoral administration. The strong signal in tumors was retained for more than 14 days after one single injection. The high concentration of Dox in tumor and long-term retention may explain the superior therapeutic efficacy and reduced side effects. The PME-D in-situ-forming gel system is a promising drug delivery system for local chemotherapy.

Rose-bengal-conjugated gold nanorods for in vivo photodynamic and photothermal oral cancer therapies

Gold nanorods (GNRs) conjugated with rose bengal (RB) molecules exhibit efficient singlet oxygen generation when illuminated by 532 nm green light and high photothermal efficiency under 810 nm near-infrared (NIR) irradiation. In vitro experiments show that reactive oxygen species generated by green light and hyperthermia produced by NIR light constitute two different mechanisms for cancer cell death. The RB-GNRs also exhibit improved photodynamic efficacy by enhancing the uptake of RB by cancer cells. In vivo experiments are conducted on hamster cheek pouches to resemble the human oral cancer conditions more accurately to assess the therapeutic effectiveness. Compared to the single photodynamic therapy (PDT) or photothermal therapy (PTT), the RB-GNRs with combined PDT-PTT capabilities provide better therapeutic effects against oral cancer and have large potential in cancer treatment.

In Vivo Osteogenic Differentiation of Human Embryoid Bodies in an Injectable in Situ-Forming Hydrogel

In this study, we examined the in vivo osteogenic differentiation of human embryoid bodies (hEBs) by using an injectable in situ-forming hydrogel. A solution containing MPEG-b-(polycaprolactone-ran-polylactide) (MCL) and hEBs was easily prepared at room temperature. The MCL solution with hEBs and osteogenic factors was injected into nude mice and developed into in situ-forming hydrogels at the injection sites; these hydrogels maintained their shape even after 12 weeks in vivo, thereby indicating that the in situ-forming MCL hydrogel was a suitable scaffold for hEBs. The in vivo osteogenic differentiation was observed only in the in situ gel-forming MCL hydrogel in the presence of hEBs and osteogenic factors. In conclusion, this preliminary study suggests that hEBs and osteogenic factors embedded in an in situ-forming MCL hydrogel may provide numerous benefits as a noninvasive alternative for allogeneic tissue engineering applications.

Cytotoxic, antitumour and antimetastatic activity of two new polyacetylenes isolated from Vernonia scorpioides (Lam.) Pers

Vernonia scorpioides (Lam.) Pers., popularly known as Enxuga, Erva-de-São Simão and Piracá, has been used in folk medicine for its anti-inflammatory, wound healing and antimicrobial properties. Two polyacetylenes, 5-octa-2,4,6-triynyl-furan-2(5H)-one (1) and 8'-hydroxy 3-4 dihydrovernoniyne (2), were isolated from the dichloromethane extract fraction of V. scorpioides. In this study, polyacetylene 1 demonstrated a more potent cytotoxic activity than 2 in the tumour cell lines examined, and cytotoxicity was found to be comparable to a commercial drug (p > 0.05) in melanoma cells. No significant cytotoxic effect was observed in normal cell lines. Furthermore, polyacetylene 1 induced an in vitro increase in caspase-3 activity in B16F10 cells. When polyacetylene 1 was administered intraperitoneally (i.p.) in mice, a reduction in solid tumour volume and metastasis was observed in mice injected with B16F10 cells. An increase in locomotor activity was also observed in mice with solid tumours, and an inhibition of mechanical hypersensitivity was observed in a mouse model of metastasis. Notably, no significant morphological change was observed in several organs harvested from the treated mice. In conclusion, in vitro and in vivo anticancer activity of polyacetylene 1 was consistently observed and involved the induction of apoptosis by the activation of caspase-3. The anticancer activity demonstrated by polyacetylene 1, together with the absence of preliminary toxicological effects, represents a new and interesting option for the management of neoplastic disease.

Optimization of drug delivery systems for intraperitoneal therapy to extend the residence time of the chemotherapeutic agent

Intraperitoneal (IP) chemotherapy is an effective way of treating peritoneal carcinomatosis of colorectal origin after complete cytoreduction. Although IP therapy has been already performed for many years, no standardized treatment design has been developed in terms of schedule, residence time, drug, or carrier solution. Because of the fast clearance of the conventional intravenous (IV) drug delivery systems used for IP therapy, a lot of research is performed to optimize IP drug delivery and extend the residence time of the cytotoxic agent in the peritoneal cavity. This paper reviews the recent advances made in drug delivery systems for IP chemotherapy, discussing the use of microparticles, nanoparticles, liposomes, micelles, implants, and injectable depots for IP delivery.

Paclitaxel Nano-Delivery Systems: A Comprehensive Review

Paclitaxel is one of the most effective chemotherapeutic drugs ever developed and is active against a broad range of cancers, such as lung, ovarian, and breast cancers. Due to its low water solubility, paclitaxel is formulated in a mixture of Cremophor EL and dehydrated ethanol (50:50, v/v) a combination known as Taxol. However, Taxol has some severe side effects related to Cremophor EL and ethanol. Therefore, there is an urgent need for the development of alternative Taxol formulations. The encapsulation of paclitaxel in biodegradable and non-toxic nano-delivery systems can protect the drug from degradation during circulation and in-turn protect the body from toxic side effects of the drug thereby lowering its toxicity, increasing its circulation half-life, exhibiting improved pharmacokinetic profiles, and demonstrating better patient compliance. Also, nanoparticle-based delivery systems can take advantage of the enhanced permeability and retention (EPR) effect for passive tumor targeting, therefore, they are promising carriers to improve the therapeutic index and decrease the side effects of paclitaxel. To date, paclitaxel albumin-bound nanoparticles (Abraxane®) have been approved by the FDA for the treatment of metastatic breast cancer and non-small cell lung cancer (NSCLC). In addition, there are a number of novel paclitaxel nanoparticle formulations in clinical trials. In this comprehensive review, several types of developed paclitaxel nano-delivery systems will be covered and discussed, such as polymeric nanoparticles, lipid-based formulations, polymer conjugates, inorganic nanoparticles, carbon nanotubes, nanocrystals, and cyclodextrin nanoparticles.

A reconstituted "two into one" thermosensitive hydrogel system assembled by drug-loaded amphiphilic copolymer nanoparticles for the local delivery of paclitaxel

Combination delivery systems composed of injectable hydrogels and drug-incorporated micelles or nanoparticles with tunable and convenient properties for clinical operation and storage are urgently demanded in regional cancer chemotherapy to prolong and control drug release, enhance antitumor efficiency and decrease side effects. Previously, we developed a novel thermosensitive amphiphilic triblock copolymer, poly(ε-caprolactone-co-1,4,8-trioxa[4.6]spiro-9-undecanone)-poly(ethylene glycol)-poly(ε-caprolactone-co-1,4,8-trioxa[4.6]spiro-9-undecanone) (PECT), and fabricated a reconstituted "two into one" combination system of thermosensitive injectable hydrogel PTX/PECT^Gel, assembled from paclitaxel (PTX)-loaded PECT nanoparticles (NPs). PTX/PECT^Gel could be stored as freeze-dried powders of paclitaxel-loaded PECT NPs, which could be reconstituted into aqueous fluid dispersions at ambient temperature just by mixing with water after gentle stirring for several minutes, and form a hydrogel at the injected site in vivo. Herein, the drug release, in vivo morphology, antitumor efficiency and pharmacokinetic properties of PTX/PECT^Gel were evaluated. The PTX/PECT^Gel combination system could continuously release PTX in a near linear manner over 42 days in vitro, and simultaneously, PTX/PECT NPs containing 75% of the total released PTX could dissociate from the PTX/PECT^Gel. PTX/PECT^Gel exhibited remarkable in vitro anti-proliferative activities against Ehrlich ascites carcinoma (EAC) cancer cells. The peritumorally or intratumorally injected PECT gel could cover the entire surface or fill up the interior space of the tumor, respectively. A single peritumoral injection of the PTX/PECT^Gel formulation at a low dosage of 10 mg kg^-1 could completely inhibit the growth of an EAC tumor inoculated in Balb/c mice after the first week, and the inhibition could be sustained for more than 21 days. The plasma pharmacokinetic study demonstrated that PTX/PECT^Gel could greatly decrease the systemic exposure of PTX, as confirmed by the rather low plasma concentration. On the other hand, the PTX concentration in normal tissues with the intratumoral injection of PTX/PECT^Gel was approximately 2 μg g^-1, which was 3-10 times lower than that with the intraperitoneal or intratumoral injection of Taxol®, implying fewer off-target side effects. These data confirmed that the PTX/PECT^Gel combination local delivery system could vastly prolong the in vitro and in vivo paclitaxel release, enhance the local tumor inhibition effect and lower the systemic exposure and tissue distribution of paclitaxel. Hence, the "two into one" PTX/PECT^Gel system holds underlying value for regional cancer chemotherapy.

Chitosan-based hydrogels to induce neuronal differentiation of rat muscle-derived stem cells

In this study, we used a chitosan hydrogel as a 3-dimensional substrate for the attachment, proliferation, and differentiation of rat muscle-derived stem cells (rMDSCs) in the presence of valproic acid (VA). Chitosan solutions containing glycerol phosphate disodium salt form a hydrogel at body temperature. The chitosan hydrogel exhibited a porous 3-dimensional network that allowed the culture medium to penetrate. The chitosan hydrogel acted as a suitable biocompatible substrate for the attachment and proliferation of rMDSCs. On chitosan hydrogel in the presence of VA, rMDSCs exhibited higher expression of the neural markers, neuron-specific enolase (NSE) and beta tubulin III (Tuj-1), the oligodendrocyte marker, oligodendrocyte transcription factor 2 (Olig-2), and the astrocyte marker, glial fibrillary acidic protein (GFAP) than those in the absence of VA. Our results suggest that rMDSCs on a chitosan hydrogel in the presence of VA can differentiate into cells with a neural-like phenotype.

Injectable in situ forming controlled release implant composed of a poly-ether-ester-carbonate and applications in the field of chemotherapy

Polymeric controlled delivery systems hold great promise in the field of modern medicine. Such technology has already been converted into commercially viable products in a myriad of fields. Chemotherapy is an example of such an area where constant efficacious levels of drug can greatly enhance clinical outcomes. The key to designing such therapies is the preparation of the proper delivery system. To this end, a series of bioresorbable polyether-ester-carbonate copolymers have been developed, which when combined with a diluent, are capable injection into the body and consistently forming a drug delivery depot. The study delineated here aimed at producing a more effective treatment of a common drug, paclitaxel, using the polymeric carrier. The polymer carrier system exhibited controlled release of paclitaxel both in vitro and in vivo. Drug concentrations were analyzed by high performance liquid chromatography and apoptotic activity was confirmed through flow cytometry. Relevant success was exhibited by the regression of tumor size following a multiple injection treatment regimen in a murine xenograft model. This multiple injection treatment shows promising results when compared to the traditional paclitaxel paradigm of a single injection for a period of 3 weeks.