Development and characterization of bacterial nanocellulose loaded with Boswellia serrata extract containing nanoemulsions as natural dressing for skin diseases

Impact of sterilization method on the system performance of lipid-based novel drug delivery

Sterilization plays a crucial role in the safety and efficacy of lipid-based novel drug delivery systems (NDDS), particularly because of the high sensitivity of lipid components to various sterilization processes. This literature review investigates the impact of different sterilization methods, such as heat sterilization, filtration, radiation, as well as chemical and gas methods, on the physicochemical properties, stability, and therapeutic performance of lipid-based NDDS (LB-NDDS), including liposomes, microemulsions, nanoemulsions, solid lipid nanoparticles (SLN), and nanostructured lipid carriers (NLC). Special emphasis is placed on lipid degradation, drug content, and particle size alterations, that may occur during sterilization. Overall, understanding the suitable sterilization technique for LB-NDDS is critical for maintaining the integrity of drug delivery systems integrity and achieving optimal therapeutic outcomes. The findings provide a comprehensive analysis of the current challenges and recent advancement (supercritical CO2, electron beam, and ozone) of sterilization techniques that align with the sensitive nature of LB-NDDS.

Plant Resin Delivery by Nanovectors as an Emerging Approach to Boost Solubility, Permeability and Bioavailability

Resins are complex mixtures of natural constituents containing non-volatile and volatile terpenes, in combination with gums and polyphenols, used since ancient times for their medicinal properties. Current research has evidenced their therapeutic value with a plethora of activities. The main limits of resins and their constituents for their clinical use are low water solubility, poor stability and bioavailability. Therefore, nanovectors including vesicles, solid lipid nanoparticles, micelles, nanoemulsions, microemulsions and mesoporic nanoparticles have been investigated to optimize the biopharmaceutical properties after topical or oral administration of resins or fractions from them, including essential oils or single constituents. In this review, we report the results evidencing that developed nanovectors were able to entrap high amounts of resins or their components, modify the release properties, enhance their cellular uptake and penetration across biological barriers and optimize the biopharmaceutical properties. In addition, the resins or their fractions as enhancer penetration molecules can optimize the architecture and properties of nanovectors in their capacity to circumvent biological barriers. Although no clinical studies have been reported until now, nanovectors represent a huge platform for upgrading therapies and emerging new treatments of resins such as wound healing therapy.

Ex situ fabrication and bioactivity characterization of Neem and Sage-infused bacterial cellulose membranes for sustainable antimicrobial applications

This study presents the ex situ development and characterization of bacterial cellulose (BC) membranes loaded with bioactive Sage and Neem extracts for enhanced antimicrobial applications. Utilizing discarded fruit waste as a cost-effective carbon source, BC production was optimized, yielding membranes with improved properties. Neem and Sage extracts, obtained via Soxhlet extraction, exhibited significant antibacterial activity against Escherichia coli and Staphylococcus aureus, with minimum inhibitory concentrations of 3.125 mg/mL and 25 mg/mL, respectively, for Neem extract, and 25 mg/mL and 50 mg/mL for Sage extract. These extracts (20 wt%) were successfully incorporated into BC membranes ex situ, resulting in BC-Neem (BC-N) and BC-Sage (BC-S) composites. Fourier-transform infrared spectroscopy (FTIR) confirmed the chemical interactions between the extracts and the BC matrix, revealing the introduction of new functional groups and enhancing the composite properties. Scanning electron microscopy (SEM) illustrated changes in morphology, indicating deeper penetration and attachment of the extracts within the BC structure. Quantitative analysis of water holding capacity demonstrated that BC-N and BC-S absorbed about 90 times water of their dry weight. Antibacterial assays through the colony-forming unit method showed that BC-N significantly inhibited S. aureus growth by 78 % and E. coli by 51 %, while BC-S exhibited a 48 % reduction against S. aureus. Agar disc-diffusion assay showed the formation of inhibition zones of 1.2 cm and 0.1 cm by BC-N against S. aureus and E. coli, respectively, in contrast to 0.2 cm and no inhibition by BC-S composite. These results highlight the potential of bioactive plant extract-loaded BC membranes as effective antimicrobial agents, offering a sustainable alternative to conventional materials in medical and food packaging applications.

Bacterial nanocelluloses as sustainable biomaterials for advanced wound healing and dressings

Wound healing remains a significant clinical challenge, calling for innovative approaches to expedite the recovery process and improve patient outcomes. Bacterial nanocelluloses (BNCs) have emerged as a promising solution in the field of wound healing and dressings due to their unique properties such as high crystallinity, mechanical strength, high purity, porosity, high water absorption capacity, biodegradability, biocompatibility, sustainability, and flexibility. BNC-based materials can be applied for the treatment of different types of wounds, from second-degree burns to skin tears, biopsy sites, and diabetic and ischemic wounds. BNC-based dressings have exceptional mechanical properties such as flexibility and strength, which ensure proper wound coverage and protection. The renewable nature, eco-friendly production process, longer lifespan, and potential for biodegradability of BNCs make them a more sustainable alternative to conventional wound care materials. This review aims to provide a detailed overview on the application of BNC-based composites for wound healing and dressings via highlighting their ability as a carrier for delivery of different types of antimicrobial compounds as well as their direct effect on the healing process. Besides, it mentions some of the in vivo and clinical studies using BNC-based dressings and describes challenges related to the application of these materials as well as their future directions.

Exploring Microemulsion Systems for the Incorporation of Glucocorticoids into Bacterial Cellulose: A Novel Approach for Anti-Inflammatory Wound Dressings

The effective pharmacological treatment of inflamed wounds such as pyoderma gangraenosum remains challenging, as the systemic application of suitable drugs such as glucocorticoids is compromised by severe side effects and the inherent difficulties of wounds as drug targets. Furthermore, conventional semi-solid formulations are not suitable for direct application to open wounds. Thus, the treatment of inflamed wounds could considerably benefit from the development of active wound dressings for the topical administration of anti-inflammatory drugs. Although bacterial cellulose appears to be an ideal candidate for this purpose due to its known suitability for advanced wound care and as a drug delivery system, the incorporation of poorly water-soluble compounds into the hydrophilic material still poses a problem. The use of microemulsions could solve that open issue. The present study therefore explores their use as a novel approach to incorporate poorly water-soluble glucocorticoids into bacterial cellulose. Five microemulsion formulations were loaded with hydrocortisone or dexamethasone and characterized in detail, demonstrating their regular microstructure, biocompatibility and shelf-life stability. Bacterial cellulose was successfully loaded with the formulations as confirmed by transmission electron microscopy and surprisingly showed homogenous incorporation, even of w/o type microemulsions. High and controllable drug permeation through Strat-M® membranes was observed, and the anti-inflammatory activity for permeated glucocorticoids was confirmed in vitro. This study presents a novel approach for the development of anti-inflammatory wound dressings using bacterial cellulose in combination with microemulsions.

An overview to nanocellulose clinical application: Biocompatibility and opportunities in disease treatment

Recently, the demand for organ transplantation has promptly increased due to the enhanced incidence of body organ failure, the increasing efficiency of transplantation, and the improvement in post-transplant outcomes. However, due to a lack of suitable organs for transplantation to fulfill current demand, significant organ shortage problems have emerged. Developing efficient technologies in combination with tissue engineering (TE) has opened new ways of producing engineered tissue substitutes. The use of natural nanoparticles (NPs) such as nanocellulose (NC) and nano-lignin should be used as suitable candidates in TE due to their desirable properties. Many studies have used these components to form scaffolds and three-dimensional (3D) cultures of cells derived from different tissues for tissue repair. Interestingly, these natural NPs can afford scaffolds a degree of control over their characteristics, such as modifying their mechanical strength and distributing bioactive compounds in a controlled manner. These bionanomaterials are produced from various sources and are highly compatible with human-derived cells as they are derived from natural components. In this review, we discuss some new studies in this field. This review summarizes the scaffolds based on NC, counting nanocrystalline cellulose and nanofibrillated cellulose. Also, the efficient approaches that can extract cellulose with high purity and increased safety are discussed. We concentrate on the most recent research on the use of NC-based scaffolds for the restoration, enhancement, or replacement of injured organs and tissues, such as cartilage, skin, arteries, brain, and bone. Finally, we suggest the experiments and promises of NC-based TE scaffolds.

In situ Formation of Polymer Microparticles in Bacterial Nanocellulose Using Alternative and Sustainable Solvents to Incorporate Lipophilic Drugs

Bacterial nanocellulose has been widely investigated in drug delivery, but the incorporation of lipophilic drugs and controlling release kinetics still remain a challenge. The inclusion of polymer particles to encapsulate drugs could address both problems but is reported sparely. In the present study, a formulation approach based on in situ precipitation of poly(lactic-co-glycolic acid) within bacterial nanocellulose was developed using and comparing the conventional solvent N-methyl-2-pyrrolidone and the alternative solvents poly(ethylene glycol), Cyrene^TM and ethyl lactate. Using the best-performing solvents N-methyl-2-pyrrolidone and ethyl lactate, their fast diffusion during phase inversion led to the formation of homogenously distributed polymer microparticles with average diameters between 2.0 and 6.6 µm within the cellulose matrix. Despite polymer inclusion, the water absorption value of the material still remained at ~50% of the original value and the material was able to release 32 g/100 cm² of the bound water. Mechanical characteristics were not impaired compared to the native material. The process was suitable for encapsulating the highly lipophilic drugs cannabidiol and 3-O-acetyl-11-keto-β-boswellic acid and enabled their sustained release with zero order kinetics over up to 10 days. Conclusively, controlled drug release for highly lipophilic compounds within bacterial nanocellulose could be achieved using sustainable solvents for preparation.

Nanocellulose, a versatile platform: From the delivery of active molecules to tissue engineering applications

Nanocellulose, a biopolymer, has received wide attention from researchers owing to its superior physicochemical properties, such as high mechanical strength, low density, biodegradability, and biocompatibility. Nanocellulose can be extracted from wide range of sources, including plants, bacteria, and algae. Depending on the extraction process and dimensions (diameter and length), they are categorized into three main types: cellulose nanocrystals (CNCs), cellulose nanofibrils (CNFs), and bacterial nanocellulose (BNC). CNCs are a highly crystalline and needle-like structure, whereas CNFs have both amorphous and crystalline regions in their network. BNC is the purest form of nanocellulose. The nanocellulose properties can be tuned by chemical functionalization, which increases its applicability in biomedical applications. This review highlights the fabrication of different surface-modified nanocellulose to deliver active molecules, such as drugs, proteins, and plasmids. Nanocellulose-mediated delivery of active molecules is profoundly affected by its topographical structure and the interaction between the loaded molecules and nanocellulose. The applications of nanocellulose and its composites in tissue engineering have been discussed. Finally, the review is concluded with further opportunities and challenges in nanocellulose-mediated delivery of active molecules.

Anti-aging properties of phytoconstituents and phyto-nanoemulsions and their application in managing aging-related diseases

Aging is spontaneous and inevitable process in all living beings. It is a complex natural phenomenon that manifests as a gradual decline of physiological functions and homeostasis. Aging inevitably leads to age-associated injuries, diseases, and eventually death. The research on aging-associated diseases aimed at delaying, preventing or even reversing the aging process are of great significance for healthy aging and also for scientific progress. Numerous plant-derived compounds have anti-aging effects, but their therapeutic potential is limited due to their short shelf-life and low bioavailability. As the novel delivery system, nanoemulsion can effectively improve this defect. Nanoemulsions enhance the delivery of drugs to the target site, maintain the plasma concentration for a longer period, and minimize adverse reaction and side effects. This review describes the importance of nanoemulsions for the delivery of phyto-derived compounds and highlights the importance of nanoemulsions in the treatment of aging-related diseases. It also covers the methods of preparation, fate and safety of nanoemulsions, which will provide valuable information for the development of new strategies in treatment of aging-related diseases.

Bacterial Cellulose Membrane Containing Epilobium angustifolium L. Extract as a Promising Material for the Topical Delivery of Antioxidants to the Skin

Bacterial cellulose membranes (BCs) are becoming useful as a drug delivery system to the skin. However, there are very few reports on their application of plant substances to the skin. Komagataeibacter xylinus was used for the production of bacterial cellulose (BC). The BC containing 5% and 10% ethanolic extract of Epilobium angustifolium (FEE) (BC-5%FEE and BC-10%FEE, respectively) were prepared. Their mechanical, structural, and antioxidant properties, as well as phenolic acid content, were evaluated. The bioavailability of BC-FESs using mouse L929 fibroblasts as model cells was tested. Moreover, In Vitro penetration through the pigskin of the selected phenolic acids contained in FEE and their accumulation in the skin after topical application of BC-FEEs was examined. The BC-FEEs were characterized by antioxidant activity. The BC-5% FEE showed relatively low toxicity to healthy mouse fibroblasts. Gallic acid (GA), chlorogenic acid (ChA), 3,4-dihydroxybenzoic acid (3,4-DHB), 4-hydroxybenzoic acid (4-HB), 3-hydroxybenzoic acid (3-HB), and caffeic acid (CA) found in FEE were also identified in the membranes. After topical application of the membranes to the pigskin penetration of some phenolic acid and other antioxidants through the skin as well as their accumulation in the skin was observed. The bacterial cellulose membrane loaded by plant extract may be an interesting solution for topical antioxidant delivery to the skin.

Electrospun chitosan oligosaccharide/polycaprolactone nanofibers loaded with wound-healing compounds of Rutin and Quercetin as antibacterial dressings

Burn injury has posed devastating burdens on the public health due to its inevitable damage to the skin structure resulting in the increased risk of infection. Therefore, it is highly demanding to develop efficacious antibacterial wound-healing dressing. Despite the favourable wound-healing activities, the curative efficacy of phytochemical compounds of quercetin (Qe) and its derivatives is limited by their poor water solubility. Here, we have fabricated a novel electrospun nanofiber membrane (ENM) consisting of polycaprolactone (PCL), chitosan oligosaccharides (COS), and Qe/Rutin (Ru) as the potential bioactive dressing for wound healing. The incorporation of chitosan oligosaccharides (COSs) in the PCL scaffold at the optimized molar ratio not only contributed to the improved hydrophilicity and water absorption performance of the ENM but effectively increased the specific surface area of the formed nanofibers. In particular, the antioxidant and antibacterial activities of the Qe/rutin-loaded nanofiber membranes were tested, which revealed that the PCL-COS-Qe membrane exhibited superior performance among all nanofiber membranes. Therefore, the developed PCL-COS-Qe/Ru nanofiber membranes hold enormous potential as healthcare products, such as wound dressings for burn injuries.

Modified Bacterial Cellulose Dressings to Treat Inflammatory Wounds

Natural products suited for prophylaxis and therapy of inflammatory diseases have gained increasing importance. These compounds could be beneficially integrated into bacterial cellulose (BC), which is a natural hydropolymer applicable as a wound dressing and drug delivery system alike. This study presents experimental outcomes for a natural anti-inflammatory product concept of boswellic acids from frankincense formulated in BC. Using esterification respectively (resp.) oxidation and subsequent coupling with phenylalanine and tryptophan, post-modification of BC was tested to facilitate lipophilic active pharmaceutical ingredient (API) incorporation. Diclofenac sodium and indomethacin were used as anti-inflammatory model drugs before the findings were transferred to boswellic acids. By acetylation of BC fibers, the loading efficiency for the more lipophilic API indomethacin and the release was increased by up to 65.6% and 25%, respectively, while no significant differences in loading could be found for the API diclofenac sodium. Post-modifications could be made while preserving biocompatibility, essential wound dressing properties and anti-inflammatory efficacy. Eventually, in vitro wound closure experiments and evaluations of the effect of secondary dressings completed the study.

Biotech nanocellulose: A review on progress in product design and today's state of technical and medical applications

Biotech nanocellulose (bacterial nanocellulose, BNC) is a high potential natural polymer. Moreover, it is the only cellulose type that can be produced biotechnologically using microorganisms resulting in hydrogels with high purity, high mechanical strength and an interconnecting micropore system. Recently, the subject of intensive research is to influence this biosynthesis to create function-determining properties. This review reports on the progress in product design and today's state of technical and medical applications. A novel, dynamic, template-based technology, called Mobile Matrix Reservoir Technology (MMR Tech), is highlighted. Thereby, shape, dimensions, surface properties, and nanonetwork structures can be designed in a process-controlled manner. The formed multilayer materials open up new applications in medicine and technology. Especially medical materials for cardiovascular and visceral surgery, and drug delivery systems are developed. The effective production of layer-structured composites and coatings are important for potential applications in the electronics, paper, food and packaging technologies.