Evaluation of tumorigenic potential of CeO2 and Fe2O3 engineered nanoparticles by a human cell in vitro screening model

In vitro inflammation and toxicity assessment of pre- and post-incinerated organomodified nanoclays to macrophages using high-throughput screening approaches

BACKGROUND

Organomodified nanoclays (ONC), two-dimensional montmorillonite with organic coatings, are increasingly used to improve nanocomposite properties. However, little is known about pulmonary health risks along the nanoclay life cycle even with increased evidence of airborne particulate exposures in occupational environments. Recently, oropharyngeal aspiration exposure to pre- and post-incinerated ONC in mice caused low grade, persistent lung inflammation with a pro-fibrotic signaling response with unknown mode(s) of action. We hypothesized that the organic coating presence and incineration status of nanoclays determine the inflammatory cytokine secretary profile and cytotoxic response of macrophages. To test this hypothesis differentiated human macrophages (THP-1) were acutely exposed (0-20 µg/cm2) to pristine, uncoated nanoclay (CloisNa), an ONC (Clois30B), their incinerated byproducts (I-CloisNa and I-Clois30B), and crystalline silica (CS) followed by cytotoxicity and inflammatory endpoints. Macrophages were co-exposed to lipopolysaccharide (LPS) or LPS-free medium to assess the role of priming the NF-κB pathway in macrophage response to nanoclay treatment. Data were compared to inflammatory responses in male C57Bl/6J mice following 30 and 300 µg/mouse aspiration exposure to the same particles.

RESULTS

In LPS-free media, CloisNa exposure caused mitochondrial depolarization while Clois30B exposure caused reduced macrophage viability, greater cytotoxicity, and significant damage-associated molecular patterns (IL-1α and ATP) release compared to CloisNa and unexposed controls. LPS priming with low CloisNa doses caused elevated cathepsin B/Caspage-1/IL-1β release while higher doses resulted in apoptosis. Clois30B exposure caused dose-dependent THP-1 cell pyroptosis evidenced by Cathepsin B and IL-1β release and Gasdermin D cleavage. Incineration ablated the cytotoxic and inflammatory effects of Clois30B while I-CloisNa still retained some mild inflammatory potential. Comparative analyses suggested that in vitro macrophage cell viability, inflammasome endpoints, and pro-inflammatory cytokine profiles significantly correlated to mouse bronchioalveolar lavage inflammation metrics including inflammatory cell recruitment.

CONCLUSIONS

Presence of organic coating and incineration status influenced inflammatory and cytotoxic responses following exposure to human macrophages. Clois30B, with a quaternary ammonium tallow coating, induced a robust cell membrane damage and pyroptosis effect which was eliminated after incineration. Conversely, incinerated nanoclay exposure primarily caused elevated inflammatory cytokine release from THP-1 cells. Collectively, pre-incinerated nanoclay displayed interaction with macrophage membrane components (molecular initiating event), increased pro-inflammatory mediators, and increased inflammatory cell recruitment (two key events) in the lung fibrosis adverse outcome pathway.

Automated SEM/EDX imaging for the in-depth characterization of non-exhaust traffic emissions from the Munich subway system

A SEM/EDX based automated measurement and classification algorithm was tested as a method for the in-depth analysis of micro-environments in the Munich subway using a custom build mobile measurements system. Sampling was conducted at platform stations, to investigate the personal exposure of commuters to subway particulate matter during platform stays. EDX spectra and morphological features of all analyzed particles were automatically obtained and particles were automatically classified based on pre-defined chemical and morphological boundaries. Source apportionment for individual particles, such as abrasion processes at the wheel-brake interface, was partially possible based on the established particle classes. An average of 98.87 ± 1.06 % of over 200,000 analyzed particles were automatically assigned to the pre-defined classes, with 84.68 ± 16.45 % of particles classified as highly ferruginous. Manual EDX analysis further revealed, that heavy metal rich particles were also present in the ultrafine size range well below 100 nm.

Development and evaluation of thiosalicylic-modified/ion-imprinted chitosan for selective removal of cerium (III) ion

Chitosan was used in this study as the bio-based product for the development of microparticles for the specifically targeted removal of cerium ions (Ce3+) by ion-imprinting technology. A thiosalicylic hydrazide-modified chitosan (TSCS) is produced via cyanoacetylation of chitosan, followed by hydrazidine derivatization to finally introduce the thiosalicylate chelating units. Ion-imprinted Ce-TSCS sorbent microparticles were prepared by combining the synthesized TSCS with Ce3+, crosslinking the polymeric Ce3+/TSCS complex with glutaraldehyde, and releasing the chelated Ce3+ using an eluent solution containing a mixture of EDTA and HNO3. Ce-TSCS had a capacity of 164 ± 1 mg/g and better removal selectivity for Ce3+ because it was smart enough to figure out which target ions would fit into the holes made by Ce3+ during the imprinting process. The kinetic data were well suited to a pseudo-second-order model, and the isotherms were well described by the Langmuir model, both of which pointed to chemisorption and adsorption through Ce3+ chelation. XPS and FTIR analyses demonstrate that the predominant adsorption mechanism is the coordination of Ce3+ with the -NH-, -NH2, and -SH chelating units of the thiosalicylic hydrazidine. These findings provide fresh direction for the development of sorbent materials that can effectively and selectively remove Ce3+ from aqueous effluents.

Improvement by application of three nanomaterials on flavor quality and physiological and antioxidant properties of tomato and their comparison

In recent years, it has been found that the flavor quality of tomato is continuously reduced compared with the original tomato varieties. Studies have found that nanomaterials can improve crop quality, but the differences and related mechanisms among different nanomaterials were not reported. In this study, nano-Se, nano-TiO2 and nano-CeO2 were spraying on tomato, and the effects of the three nanomaterials on the flavor quality and physiological and antioxidant properties of fruits were analyzed and compared. The results showed compared with nano-TiO2 and nano-CeO2, nano-Se showed more obvious positive effects. Nano-Se increased the size and weight of tomato fruits and the levels of soluble sugar, promoted the accumulation of photosynthetic pigment, decreased the content of titratable acid, and also changed the expression of related genes, finally making the fruit sweeter; it also promoted the accumulation of antioxidant substances and nutrients such as lycopene, ascorbic acid, salicylic acid, GSH, SOD and CAT and decreased the content of MDA, H2O2 and OFR thus improving the antioxidant performance of fruits; the contents of volatiles were also increased and the olfactory experience of tomato was improved. Nano-TiO2 and nano-CeO2 also improved the flavor quality and antioxidant properties of tomato, but the degree was lower than nano-Se. This experiment provided references for selecting more appropriate nanomaterials to improve tomato quality, and revealed the effects and mechanisms of different nanomaterials on tomato quality.

In Vitro Cell Transformation Assays: A Valuable Approach for Carcinogenic Potentiality Assessment of Nanomaterials

This review explores the application of in vitro cell transformation assays (CTAs) as a screening platform to assess the carcinogenic potential of nanomaterials (NMs) resulting from continuously growing industrial production and use. The widespread application of NMs in various fields has raised concerns about their potential adverse effects, necessitating safety evaluations, particularly in long-term continuous exposure scenarios. CTAs present a realistic screening platform for known and emerging NMs by examining their resemblance to the hallmark of malignancy, including high proliferation rates, loss of contact inhibition, the gain of anchorage-independent growth, cellular invasion, dysregulation of the cell cycle, apoptosis resistance, and ability to form tumors in experimental animals. Through the deliberate transformation of cells via chronic NM exposure, researchers can investigate the tumorigenic properties of NMs and the underlying mechanisms of cancer development. This article examines NM-induced cell transformation studies, focusing on identifying existing knowledge gaps. Specifically, it explores the physicochemical properties of NMs, experimental models, assays, dose and time requirements for cell transformation, and the underlying mechanisms of malignancy. Our review aims to advance understanding in this field and identify areas for further investigation.

Label-free identification of microplastics in human cells: dark-field microscopy and deep learning study

The development of an automatic method of identifying microplastic particles within live cells and organisms is crucial for high-throughput analysis of their biodistribution in toxicity studies. State-of-the-art technique in the data analysis tasks is the application of deep learning algorithms. Here, we propose the approach of polystyrene microparticle classification differing only in pigmentation using enhanced dark-field microscopy and a residual neural network (ResNet). The dataset consisting of 11,528 particle images has been collected to train and evaluate the neural network model. Human skin fibroblasts treated with microplastics were used as a model to study the ability of ResNet for classifying particles in a realistic biological experiment. As a result, the accuracy of the obtained classification algorithm achieved up to 93% in cell samples, indicating that the technique proposed will be a potent alternative to time-consuming spectral-based methods in microplastic toxicity research.

Creating sets of similar nanoforms with the ECETOC NanoApp: real-life case studies

The ECETOC NanoApp was developed to support industry in the registration of sets of nanoforms, as well as regulators in the evaluation of these registration dossiers. The ECETOC NanoApp uses a systematic approach to create and justify sets of similar nanoforms, following the ECHA guidance in a transparent and evidence-based manner. The rational and decision rules behind the ECETOC NanoApp are described in detail in "Janer, G., R. Landsiedel, and W. Wohlleben. 2021. [Rationale and Decision Rules Behind the ECETOC NanoApp to Support Registration of Sets of Similar Nanoforms within REACH. Nanotoxicology 15 (2): 145-122. https://doi.org/10.1080/17435390.2020.1842933]". The decision criteria apply to human health and environmental hazards and risks. Here, we focus mostly on human health hazards; the decision rules are applied to a series of case studies, each consisting of real nanoforms: two barium sulfate nanoforms, four colloidal silica nanoforms, eight ceria nanoforms, and four copper phthalocyanine nanoforms. For each of them, we show step by step how the ECETOC NanoApp rules are applied. The cases include nanoforms that are justified as members of the same set of similar nanoforms based on sufficient similarity of their intrinsic properties (Tier 1). They also include other nanoforms with a relatively high (but insufficient) similarity of intrinsic properties; their similarity could be justified by functional properties (Tier 2). The case studies also include nanoforms that are concluded not to belong to the same set of similar nanoforms. These outcomes of the NanoApp were overall consistent (sometimes conservative) with available in vivo data. We also noted that datasets for various nanoforms were limited and use of the NanoApp may require the generation of data relevant to the decision criteria.

Osteopontin mRNA expression by rat mesothelial cells exposed to multi-walled carbon nanotubes as a potential biomarker of chronic neoplastic transformation in vitro

Mesothelioma is a cancer of the lung pleura primarily associated with inhalation of asbestos fibers. Multi-walled carbon nanotubes (MWCNTs) are engineered nanomaterials that pose a potential risk for mesothelioma due to properties that are similar to asbestos. Inhaled MWCNTs migrate to the pleura in rodents and some types cause mesothelioma. Like asbestos, there is a diversity of MWCNT types. We investigated the neoplastic potential of tangled (tMWCNT) versus rigid (rMWCNT) after chronic exposure using serial passages of rat mesothelial cells in vitro. Normal rat mesothelial (NRM2) cells were exposed to tMWCNTs or rMWCNTs for 45 weeks over 85 passages to determine if exposure resulted in transformation to a neoplastic phenotype. Rat mesothelioma (ME1) cells were used as a positive control. Osteopontin (OPN) mRNA was assayed as a biomarker of transformation by real time quantitative polymerase chain reaction (qPCR) and transformation was determined by a cell invasion assay. Exposure to rMWCNTs, but not tMWCNTs, resulted in transformation of NRM2 cells into an invasive phenotype that was similar to ME1 cells. Moreover, exposure of NRM2 cells to rMWCNTs increased OPN mRNA that correlated with cellular transformation. These data suggest that OPN is a potential biomarker that should be further investigated to screen the carcinogenicity of MWCNTs in vitro.

Micro- and Nanosized Substances Cause Different Autophagy-Related Responses

With rapid industrialization, humans produce an increasing number of products. The composition of these products is usually decomposed. However, some substances are not easily broken down and gradually become environmental pollutants. In addition, these substances may cause bioaccumulation, since the substances can be fragmented into micro- and nanoparticles. These particles or their interactions with other toxic matter circulate in humans via the food chain or air. Whether these micro- and nanoparticles interfere with extracellular vesicles (EVs) due to their similar sizes is unclear. Micro- and nanoparticles (MSs and NSs) induce several cell responses and are engulfed by cells depending on their size, for example, particulate matter with a diameter ≤2.5 μm (PM2.5). Autophagy is a mechanism by which pathogens are destroyed in cells. Some artificial materials are not easily decomposed in organisms. How do these cells or tissues respond? In addition, autophagy operates through two pathways (increasing cell death or cell survival) in tumorigenesis. Many MSs and NSs have been found that induce autophagy in various cells and tissues. As a result, this review focuses on how these particles interfere with cells and tissues. Here, we review MSs, NSs, and PM2.5, which result in different autophagy-related responses in various tissues or cells.

Endogenous doesn't always mean innocuous: a scoping review of iron toxicity by inhalation

Ambient air pollution is a leading risk factor for the global burden of disease. One possible pathway of particulate matter (PM)-induced toxicity is through iron (Fe), the most abundant metal in the atmosphere. The aim of the review was to consider the complexity of Fe-mediated toxicity following inhalation exposure focusing on the chemical and surface reactivity of Fe as a transition metal and possible pathways of toxicity via reactive oxygen species (ROS) generation as well as considerations of size, morphology, and source of PM. A broad term search of 4 databases identified 2189 journal articles and reports examining exposure to Fe via inhalation in the past 10 years. These were sequentially analyzed by title, abstract and full-text to identify 87 articles publishing results on the toxicity of Fe-containing PM by inhalation or instillation to the respiratory system. The remaining 87 papers were examined to summarize research dealing with in vitro, in vivo and epidemiological studies involving PM containing Fe or iron oxide following inhalation or instillation. The major findings from these investigations are summarized and tabulated. Epidemiological studies showed that exposure to Fe oxide is correlated with an increased incidence of cancer, cardiovascular diseases, and several respiratory diseases. Iron PM was found to induce inflammatory effects in vitro and in vivo and to translocate to remote locations including the brain following inhalation. A potential pathway for the PM-containing Fe-mediated toxicity by inhalation is via the generation of ROS which leads to lipid peroxidation and DNA and protein oxidation. Our recommendations include an expansion of epidemiological, in vivo and in vitro studies, integrating research improvements outlined in this review, such as the method of particle preparation, cell line type, and animal model, to enhance our understanding of the complex biological interactions of these particles.

Toxicity assessment of metal oxide nanomaterials using in vitro screening and murine acute inhalation studies

Characterizations and in vitro toxicity screening were performed on metal oxide engineered nanomaterials (ENMs) independently comprising ZnO, CuO, CeO₂, Fe₂O₃, WO₃, V₂O₅, TiO₂, Al₂O₃ and MgO. Nanomaterials that exhibited the highest toxicity responses in the in vitro screening assays (ZnO, CuO, and V₂O₅) and the lesser explored material WO₃ were tested for acute pulmonary toxicity in vivo. Female and male mice (C57Bl/6J) were exposed to aerosolized metal oxide ENMs in a nose-only exposure system and toxicity outcomes (biomarkers of cytotoxicity, immunotoxicity, inflammation, and lung histopathology) at 4 and 24 h after the start of exposure were assessed. The studies were performed as part of the NIEHS Nanomaterials Health Implications Research consortium with the purpose of investigating the effects of ENMs on various biological systems. ENMs were supplied by the Engineered Nanomaterials Resource and Coordination Core. Among the ENMs studied, the highest toxicity was observed for CuO and ZnO NPs in both in vitro and in vivo acute models. Compared to sham-exposed controls, there was a significant increase in bronchoalveolar lavage neutrophils and proinflammatory cytokines and a loss of macrophage viability at both 4 h and 24 h for ZnO and CuO but not seen for V₂O₅ or WO₃. These effects were observed in both female and male mice. The cell viability performed after in vitro exposure to ENMs and assessment of lung inflammation after acute inhalation exposure in vivo were shown to be sensitive endpoints to predict ENM acute toxicity.

Prediction of protein corona on nanomaterials by machine learning using novel descriptors

Effective in silico methods to predict protein corona compositions on engineered nanomaterials (ENMs) could help elucidate the biological outcomes of ENMs in biosystems without the need for conducting lengthy experiments for corona characterization. However, the physicochemical properties of ENMs, used as the descriptors in current modeling methods, are insufficient to represent the complex interactions between ENMs and proteins. Herein, we utilized the fluorescence change (FC) from fluorescamine labeling on a protein, with or without the presence of the ENM, as a novel descriptor of the ENM to build machine learning models for corona formation. FCs were significantly correlated with the abundance of the corresponding proteins in the corona on diverse classes of ENMs, including metal and metal oxides, nanocellulose, and 2D ENMs. Prediction models established by the random forest algorithm using FCs as the ENM descriptors showed better performance than the conventional descriptors, such as ENM size and surface charge, in the prediction of corona formation. Moreover, they were able to predict protein corona formation on ENMs with very heterogeneous properties. We believe this novel descriptor can improve in silico studies of corona formation, leading to a better understanding on the protein adsorption behaviors of diverse ENMs in different biological matrices. Such information is essential for gaining a comprehensive view of how ENMs interact with biological systems in ENM safety and sustainability assessments.

Investigation of Twenty Metal, Metal Oxide, and Metal Sulfide Nanoparticles' Impact on Differentiated Caco-2 Monolayer Integrity

The use of engineered nanomaterials (ENMs) in foods and consumer products is rising, increasing the potential for unintentional ingestion. While the cytotoxicity of many ENMs has been investigated, less attention has been given to adverse impact on the intestinal barrier integrity. Chronical disruption of gastrointestinal integrity can have far reaching health implications. Using fully differentiated Caco-2 cells, the perturbation of intestinal barrier function and cytotoxicity were investigated for 20 metal, metal oxide, and metal sulfide ENMs. Caco-2 cells were exposed to 50 μg/mL ENMs for 24 hours. ENM formulations were characterized at 0 and 24 hours, and In Vitro Sedimentation, Diffusion and Dosimetry Modeling was applied to calculate the effective dose of exposure during 24 hours. The apparent permeability coefficient (P_app) was determined for fluorescent labeled dextran (3,000 Da) and tight junction integrity was evaluated by immunofluorescence microscopy. Cytotoxicity was investigated by determining lactate dehydrogenase release (LDH) and cell metabolic activity (tetrazolium based MTS) assays. Four ENMs led to significantly increased P_app, (15.8% w/w% Ag-SiO₂ nanoparticle (NP), 60 nm CdS NP, 100 nm V₂O₅ flakes, and 50 nm ZnO NP), while one ENM (20 nm MgO NP) decreased P_app. With the exception of CdS NP, significantly increased P_app was not connected with cell cytotoxicity. The calculated effective dose concentration was not correlated with increased P_app. Our results illustrate that while many metal, metal oxide, and metal sulfide ENMs do not adversely affect monolayer integrity or induce cytotoxicity in differentiated Caco-2 cells, a subset of ENMs may compromise the intestinal integrity. This study demonstrated the use of differentiated Caco-2 monolayer and P_app as an endpoint to identify and prioritize ENMs that should be investigated further. The interaction between ENMs and the intestinal epithelium needs to be evaluated to understand potential intestinal barrier dysfunction and resulting health implications.

Integrated Transcriptomics, Metabolomics, and Lipidomics Profiling in Rat Lung, Blood, and Serum for Assessment of Laser Printer-Emitted Nanoparticle Inhalation Exposure-Induced Disease Risks

Laser printer-emitted nanoparticles (PEPs) generated from toners during printing represent one of the most common types of life cycle released particulate matter from nano-enabled products. Toxicological assessment of PEPs is therefore important for occupational and consumer health protection. Our group recently reported exposure to PEPs induces adverse cardiovascular responses including hypertension and arrythmia via monitoring left ventricular pressure and electrocardiogram in rats. This study employed genome-wide mRNA and miRNA profiling in rat lung and blood integrated with metabolomics and lipidomics profiling in rat serum to identify biomarkers for assessing PEPs-induced disease risks. Whole-body inhalation of PEPs perturbed transcriptional activities associated with cardiovascular dysfunction, metabolic syndrome, and neural disorders at every observed time point in both rat lung and blood during the 21 days of exposure. Furthermore, the systematic analysis revealed PEPs-induced transcriptomic changes linking to other disease risks in rats, including diabetes, congenital defects, auto-recessive disorders, physical deformation, and carcinogenesis. The results were also confirmed with global metabolomics profiling in rat serum. Among the validated metabolites and lipids, linoleic acid, arachidonic acid, docosahexanoic acid, and histidine showed significant variation in PEPs-exposed rat serum. Overall, the identified PEPs-induced dysregulated genes, molecular pathways and functions, and miRNA-mediated transcriptional activities provide important insights into the disease mechanisms. The discovered important mRNAs, miRNAs, lipids and metabolites may serve as candidate biomarkers for future occupational and medical surveillance studies. To the best of our knowledge, this is the first study systematically integrating in vivo, transcriptomics, metabolomics, and lipidomics to assess PEPs inhalation exposure-induced disease risks using a rat model.

Iron Oxide Nanoparticle-Induced Neoplastic-Like Cell Transformation in Vitro Is Reduced with a Protective Amorphous Silica Coating

Iron oxide nanoparticles (IONP) have recently surged in production and use in a wide variety of biomedical and environmental applications. However, their potential long-term health effects, including carcinogenesis, are unknown. Limited research suggests IONP can induce genotoxicity and neoplastic transformation associated with particle dissolution and release of free iron ions. "Safe by design" strategies involve the modification of particle physicochemical properties to affect subsequent adverse outcomes, such as an amorphous silica coating to reduce IONP dissolution and direct interaction with cells. We hypothesized that long-term exposure to a specific IONP (nFe₂O₃) would induce neoplastic-like cell transformation, which could be prevented with an amorphous silica coating (SiO₂-nFe₂O₃). To test this hypothesis, human bronchial epithelial cells (Beas-2B) were continuously exposed to a 0.6 μg/cm² administered a dose of nFe₂O₃ (∼0.58 μg/cm² delivered dose), SiO₂-nFe₂O₃ (∼0.55 μg/cm² delivered dose), or gas metal arc mild steel welding fumes (GMA-MS, ∼0.58 μg/cm² delivered dose) for 6.5 months. GMA-MS are composed of roughly 80% iron/iron oxide and were recently classified as a total human carcinogen. Our results showed that low-dose/long-term in vitro exposure to nFe₂O₃ induced a time-dependent neoplastic-like cell transformation, as indicated by increased cell proliferation and attachment-independent colony formation, which closely matched that induced by GMA-MS. This transformation was associated with decreases in intracellular iron, minimal changes in reactive oxygen species (ROS) production, and the induction of double-stranded DNA damage. An amorphous silica-coated but otherwise identical particle (SiO₂-nFe₂O₃) did not induce this neoplastic-like phenotype or changes in the parameters mentioned above. Overall, the presented data suggest the carcinogenic potential of long-term nFe₂O₃ exposure and the utility of an amorphous silica coating in a "safe by design" hazard reduction strategy, within the context of a physiologically relevant exposure scenario (low-dose/long-term), with model validation using GMA-MS.

Epithelial cell functionality on electroconductive Fe/Sr co-doped biphasic calcium phosphate

In the perspective of dental restorative applications, co-doped bioceramics have not been explored much. From the clinical perspective, a successful dental implant is expected to interact with peri-prosthetic bones, gingival tissue, and surrounding connective tissues. The interaction of implant and implant coating materials with bone tissue is well studied. However, their interaction with surrounding epithelial components needs scientific validation. In this context, the present study aims at quantitative evaluation of the electrical properties of Fe/Sr co-doped biphasic calcium phosphate (BCP) samples and assessment of their cytocompatibility with epithelial (vero) cells. Sr/Fe co-doped BCPs were prepared by sol-gel synthesis technique, with different dopant concentration. Impact of co-doping on conductivity was assessed and interestingly an increase in conductivity with dopant amount was recorded in different co-doped BCPs. Cellular study showed the significant ( p = 0.01) increase in both cellular viability and functionality with increasing conductivity of samples. Higher epithelial cell adhesion indicates that (Sr/Fe) co-doped BCP would be favorable for faster epithelial sealing and also would reduce the chances of infection. Real-time PCR and immunofluorescence studies indicated that the expression of the epithelial marker (E-cadherin) significantly ( p = 0.01) increased in 10, 30 and 40 mol% co-doped samples in comparison to undoped BCP. In contrast to E-cadherin, fold change of β-catenin remains unchanged amongst the co-doped ceramics, implying the absence of tumorigenic potential of (Sr/Fe) co-doped BCP. In addition, immune-fluorescence signatures for cellular polarity are established from enhanced expression PARD3 protein, which has major relevance for cellular morphogenesis and cell division. Summarizing, the present study establishes the efficacy of Sr/Fe co-doped BCPs as a dental implant coating material and its ability to modulate vero cell functionality.

Challenges facing nanotoxicology and nanomedicine due to cellular diversity

This review examines the interaction of nanomaterials (NMs) with cells from the perspective of major cellular differentiations. The structure and composition of cells reflect their role and function in a particular organ or environment. The normal differentiated-state and diseased cells may respond to NMs very differently. This review progresses with due care on nanotoxicology while emphasizing the potential of NMs in treating stress-associated disorders, including cancer and degeneration. The striking potential of NMs in inducing ROS, scavenging ROS, depleting cellular antioxidants, replenishing antioxidants, mimicking antioxidant enzyme activity, and modulating the immune system all show their considerable potential in treating cancer and other aging-associated disorders. It is now clear that NMs become more active and versatile when they come into contact with biological machinery, surprisingly in some cases, in a manner dependent on cell type. The mechanisms leading to the contrasting bioresponse of NMs ranging from toxicity to anticancer and from cell survival to carcinogenicity followed by their immuno-modulating potential show NMs to be a highly promising agent in biomedical therapy. This first-of-its-kind article seeks the challenges to be addressed that could provide a solid rationale in translating the promises of nanomedicine. A thorough understanding of normal and cancer biology could help to minimize the gap between basic and translational research in nanotechnology-based therapy.

Synergistic role of nanoceria on the ability of tobacco smoke to induce carcinogenic hallmarks in lung epithelial cells

AIM

Since controversial results have been obtained in studies dealing with nanoceria usefulness in biomedical applications, the transforming effects of long-term exposure to nanoceria in lung epithelial cells, alone or together with cigarette smoke condensate (CSC), were evaluated.

MATERIALS & METHODS

In vitro cell transformation techniques were used to study several hallmarks of carcinogenesis. Morphology, cell proliferation, gene expression, cell migration, anchorage-independent cell growth and cell secretome were analyzed.

RESULTS & CONCLUSION

Data evidence no transforming ability of nanoceria, but support a synergistic role on CSC's transforming ability. A more noticeable spindle-like phenotype, increased proliferation rate, higher degree of differentiation status dysregulation, higher migration capacity, increased anchorage-independent cell growth and higher levels of MMP-9 and cell growth promoting capability, were observed. In addition, nanoceria co-exposure exacerbates the expression of FRA-1.

Potential Toxicity and Underlying Mechanisms Associated with Pulmonary Exposure to Iron Oxide Nanoparticles: Conflicting Literature and Unclear Risk

Fine/micron-sized iron oxide particulates are incidentally released from a number of industrial processes, including iron ore mining, steel processing, welding, and pyrite production. Some research suggests that occupational exposure to these particulates is linked to an increased risk of adverse respiratory outcomes, whereas other studies suggest that iron oxide is biologically benign. Iron oxide nanoparticles (IONPs), which are less than 100 nm in diameter, have recently surged in use as components of novel drug delivery systems, unique imaging protocols, as environmental catalysts, and for incorporation into thermoplastics. However, the adverse outcomes associated with occupational exposure to IONPs remain relatively unknown. Relevant in vivo studies suggest that pulmonary exposure to IONPs may induce inflammation, pulmonary fibrosis, genotoxicity, and extra-pulmonary effects. This correlates well with in vitro studies that utilize relevant dose, cell type(s), and meaningful end points. A majority of these adverse outcomes are attributed to increased oxidative stress, most likely caused by particle internalization, dissolution, release of free iron ions, and disruption of iron homeostasis. However, because the overall toxicity profile of IONPs is not well understood, it is difficult to set safe exposure limit recommendations that would be adequate for the protection of at-risk workers. This review article will focus on known risks following IONPs exposure supported by human, animal, and cell culture-based studies, the potential challenges intrinsic to IONPs toxicity assessment, and how these may contribute to the poorly characterized IONPs toxicity profile.

Effect of surface functionalizations of multi-walled carbon nanotubes on neoplastic transformation potential in primary human lung epithelial cells

Functionalized multi-walled carbon nanotube (fMWCNT) development has been intensified to improve their surface activity for numerous applications, and potentially reduce toxic effects. Although MWCNT exposures are associated with lung tumorigenesis in vivo, adverse responses associated with exposure to different fMWCNTs in human lung epithelium are presently unknown. This study hypothesized that different plasma-coating functional groups determine MWCNT neoplastic transformation potential. Using our established model, human primary small airway epithelial cells (pSAECs) were continuously exposed for 8 and 12 weeks at 0.06 μg/cm² to three-month aged as-prepared-(pMWCNT), carboxylated-(MW-COOH), and aminated-MWCNTs (MW-NH_x). Ultrafine carbon black (UFCB) and crocidolite asbestos (ASB) served as particle controls. fMWCNTs were characterized during storage, and exposed cells were assessed for several established cancer cell hallmarks. Characterization analyses conducted at 0 and 2 months of aging detected a loss of surface functional groups over time due to atmospheric oxidation, with MW-NH_x possessing less oxygen and greater lung surfactant binding affinity. Following 8 weeks of exposure, all fMWCNT-exposed cells exhibited significant increased proliferation compared to controls at 7 d post-treatment, while UFCB- and ASB-exposed cells did not differ significantly from controls. UFCB, pMWCNT, and MW-COOH exposure stimulated significant transient invasion behavior. Conversely, aged MW-NH_x-exposed cells displayed moderate increases in soft agar colony formation and morphological transformation potential, while UFCB cells showed a minimal effect compared to all other treatments. In summary, surface properties of aged fMWCNTs can impact cell transformation events in vitro following continuous, occupationally relevant exposures.