Outcome and complications of posterior transiliac plating for vertically unstable sacral fractures

Modified Transiliac Plating Technique for Complex Posterior Pelvic Ring Injuries

Pelvic ring injuries with rotational and translational instability are complex and often result from high-energy trauma, posing significant challenges in management. Internal fixation has emerged as the preferred approach, with traditional methods such as iliosacral screw fixation exhibiting drawbacks like implant-related morbidity and hardware complications. This paper presents a modified minimally invasive transiliac plating technique aimed at addressing these challenges. The surgical technique involves careful preoperative planning, precise patient positioning, and meticulous exposure of the posterior pelvic structures. Key steps include osteotomy of the posterior superior iliac spine (PSIS), formation of a subcutaneous tunnel, contouring and placement of the plate, and fixation with strategically positioned screws. Additionally, the modified technique incorporates the replacement of the osteotomized PSIS bony fragment, providing secondary stability and minimizing the risk of implant back out. This modification aims to enhance biomechanical stability, reduce implant-related morbidity, and ensure optimal functional outcomes. The technique's efficacy is supported by biomechanical principles and clinical studies, indicating its potential as a promising alternative in the management of unstable pelvic ring injuries. Overall, this modified approach offers improved patient comfort, reduced surgical risks, and enhanced long-term outcomes, contributing to advancements in pelvic ring fracture management.

Traumatic lumbosacral instability: part 2-indications and techniques for surgical management

Traumatic lumbosacral instability (TLSI) refers to a traumatic disruption of the axial skeleton at the level of the lumbosacral motion segment and/or sacrum, resulting in mechanical separation of the caudal spinal column from the posterior pelvic ring. Managing TLSI and its four underlying conditions poses unique challenges among spinal and pelvic injuries. This second part of a two-part series focuses on treatment strategies and decision making in TLSI, with an emphasis on surgical stabilization techniques. The primary objectives of this article are to: (1) elucidate factors influencing clinical decision-making, (2) synthesize current treatment options for the injury patterns underlying TLSI, and (3) briefly outline expected outcomes and complications.

Outcome of pelvic ring injuries

Outcome evaluation is of major importance to provide data to analyze the value of the chosen treatment concept. Despite an increasing effort of analyzing outcome after treatment of different pelvic ring injuries, a mixture of different outcome parameters is in use. The Majeed score is most frequently used for mid- to long-term evaluation and the quality of life is analyzed using the SF-36 score. The lack in nearly all studies is that different treatment concepts are used, and only selected evaluation parameters are reported. Until today, no well-accepted standardized measurement instruments are available to analyze the clinical and radiological results after pelvic ring injuries. Overall, stability-based long-term sequelae can be expected with increasing complaints from stable type A injuries to completely unstable type C injuries. Beside a fracture-type specific treatment, concomitant injuries of other injury regions and associated local pelvic injuries (complex pelvic trauma) seem to additionally influence the results. Results of treatment of specific fracture types are sparse as a wide range of different injury types and different treatment concepts are analyzed within these analyses. A sufficient pelvic outcome instrument which addresses relevant pelvic outcome parameters is still missing. Thus, future evaluation of long-term results after pelvic ring. injuries should include prospective, multicenter outcome studies with comparable parameters.

Functional and Radiological Outcome of Anterior Plate Stabilisation of the Sacroiliac Joint in Unstable Pelvic Injury

Introduction

Sacroiliac joint disruption, resulting from high energy trauma can cause significant morbidity if no proper treatment given. Many techniques can be used to stabilise pelvic ring injuries. We studied the functional and radiological outcome following open reduction and anterior fixation of the sacroiliac joint and agreement between both outcomes.

Material and Methods

This retrospective study involved 15 patients with unstable pelvic injuries requiring surgical intervention from January 2015 to December 2020 who undergone anterior stabilisation of the sacroiliac joint. Radiological outcome assessments were done postoperatively by using Lindahl criteria. The complete functional outcome was assessed at least six months postoperatively when patients were able to weight bear by using Majeed system. Descriptive statistical analysis was performed using IBM SPSS Statistics Version 27.

Results

The participants consist of 73.3% male and 26.7% female patients. A total of 66.7% of patients had a Tile type B pelvic ring injury, and the remaining 33.3% had a Tile type C pelvic ring injury. Based on the Majeed system, 73.3% of patients had excellent functional outcomes, and based on Lindahl criteria; there were 60% of patients who had excellent radiological outcome. However, there was no significant agreement between functional and radiological outcomes.

Conclusion

Definitive fixation of the sacroiliac joint by anterior plate stabilisation provided an excellent functional and radiological outcome mainly due to good anatomical reduction and mechanical stability. However, further study may be needed to evaluate the correlation between functional and radiological outcomes and compare the various method of fixation with a larger sample size.

Combined pelvic ring and acetabular fractures - strategies and sequence of surgery. State of the art

Combined injuries of the pelvic ring and the acetabulum are uncommon. Acute treatment should follow common protocols (ATLS e.g.) for pelvic ring injuries, although mechanical stabilization using pelvic binders or external fixators might be insufficient or even worsen the reduction in some combined fracture patterns. In case of mechanically connected acetabular and pelvic ring injury (MCAPI), surgical treatment might be demanding in lack of clear recommendations concerning the reduction and fixation sequence. A "pelvic ring first" sequence may be the best choice for most MCAPIs, starting with sacrum or SI-joint and symphysis pubis. An "acetabulum first" sequence should be considered in relatively stable posterior ring injuries and acetabulum fractures in younger patients, where a perfect anatomical reduction is feasible. Definitive surgical treatment should be performed as soon as possible depending on concomitant injuries, ideally within 3-7 days. Mechanical understanding of the combined fracture pattern and accurate planning are mandatory for surgical repair.

Sacral fracture stabilisation using dorsal transiliac locking plates: 12 cases (2017-2023)

OBJECTIVES

To describe the clinical presentations, outcomes and complications associated with the use of dorsal transiliac locking plates to stabilise sacral fractures in dogs and cats.

MATERIALS AND METHODS

A single-centre retrospective analysis of all patients that presented with sacral fractures between February 2017 and February 2023 that were managed surgically using paired dorsal transiliac locking plates. Twelve animals met the criteria for inclusion in a retrospective clinical case series. An owner questionnaire was employed to assess long-term outcomes.

RESULTS

Eleven dogs and one cat with a mean age of 3.1 years (range 0.6 to 8.8) were included. Eleven patients presented following a motor vehicle accident and most were either non-ambulatory (n=8) or displayed severe unilateral hindlimb lameness (n=4). Nine sacral fractures were considered Anderson type II and three Anderson type V. The plate fixation was augmented with additional surgical stabilisation in 11 cases. Eleven patients were ambulatory at discharge and all cases healed uneventfully without major surgical or postoperative complications. Long-term follow-up (>60 days) was available in 10 animals at a mean of 694 days (range 65 to 1805) and owner-assessed outcomes via questionnaire were reported as good to excellent in all cases.

CLINICAL SIGNIFICANCE

The application of transiliac locking plates provided sufficient stability to facilitate sacral fracture healing with minimal clinical complications. This method represents a robust and safe option to stabilise sacral fractures in dogs and cats, offering an alternative to iliosacral lag screw fixation.

Long-Term Follow-Up after Iliosacral Screw Fixation of Unstable Pelvic Ring Fractures

(1) Background: High-energy injuries of the pelvic ring are rare. The wide application of iliosacral screw fixation of the posterior pelvic ring is relatively new. The aim of the present study was to evaluate the long-term quality of life. (2) Methods: All patients treated with an iliosacral screw for a posterior pelvic ring stabilization after high-energy trauma at a level 1 trauma center between 2005 and 2015 were included. Pelvic ring injuries were classified according to the Tile classification adapted by AO/ASIF. The clinical evaluation included the patient-oriented questionnaires surveys of the Majeed Score, Iowa Pelvic Score (IPS), Work Ability Index (WAI), SF-36, EQ5D-5L. (3) Results: A total of 84 patients were included with a median follow-up of 130.1 months (IQR 95.0-162.0 months). The median ISS was 22.5 (IQR 16.0-29.0), mean Majeed Score 83.32 (SD ± 19.26), IPS 77.88 (SD ± 13.96), WAI 32.71 (SD ± 11.31), SF-36 PF 71.25 (SD ± 29.61) and EQ5D-5L 0.83 (SD ± 0.21). There was a notably difference between uni- and bilateral pelvic fractures (p = 0.033) as well as a correlation with the ISS (p = 0.043) with inferior functional outcome measured by IPS. (4) Conclusions: Long-term follow-up of iliosacral screw fixation of unstable pelvic ring fractures showed a good quality of life and functional outcome with equal EQ5D-5L results and inferior SF-36 physical functioning compared to the German population.

Cerclage augmentation of S1-S2 transsacral screw fixation in osteoporotic posterior pelvis ring injuries: A biomechanical feasibility study

Injuries of the posterior pelvic ring are predominantly associated with osteoporosis. Percutaneously placed screws transfixing the sacroiliac joint have become the gold standard for their treatment. However, screw cut-out, backing-out, and loosening are common complications. One promising option could be cerclage reinforcement of cannulated screw fixations. Therefore, the aim of this study was to evaluate the biomechanical feasibility of posterior pelvic ring injuries fixed with S1 and S2 transsacral screws augmented with cerclage. Twenty-four composite osteoporotic pelvises with posterior sacroiliac joint dislocation were stratified into four groups for S1-S2 transsacral fixation using either (1) fully threaded screws, (2) fully threaded screws with cable cerclage, (3) fully threaded screws with wire cerclage, or (4) partially threaded screws with wire cerclage. All specimens were biomechanically tested under progressively increasing cyclic loading until failure. Intersegmental movements were monitored by motion tracking. The transsacral partially threaded screw fixation with wire cerclage augmentation resulted in significantly less combined angular intersegmental movement in the transverse and coronal plane versus its fully threaded counterpart (p = 0.032), as well as in significantly less flexion versus all other fixations (p ≤ 0.029). Additional cerclage augmentation could be performed intraoperatively to improve the stability of posterior pelvic ring injuries treated with S1-S2 transsacral screw fixation. Further investigations should follow to consolidate the current results on real bones and possibly consider execution of a clinical study.

Is a Washer a Mandatory Component in Young Trauma Patients with S1-S2 Iliosacral Screw Fixation of Posterior Pelvis Ring Injuries? A Biomechanical Study

Background and purpose: Cannulated screws are standard implants for percutaneous fixa-tion of posterior pelvis ring injuries. The choice of whether to use these screws in combination with a washer is still undecided. The aim of this study was to evaluate the biomechanical competence of S1-S2 sacroiliac (SI) screw fixation with and without using a washer across three different screw designs. Material and Methods: Twenty-four composite pelvises were used and an SI joint injury type APC III according to the Young and Burgess classification was simulated. Fixation of the posterior pelvis ring was performed using either partially threaded short screws, fully threaded short screws, or fully threaded long transsacral screws. Biomechanical testing was performed under progressively increasing cyclic loading until failure, with monitoring of the intersegmental and bone-implant movements via motion tracking. Results: The number of cycles to failure and the corresponding load at failure (N) were significantly higher for the fully threaded short screws with a washer (3972 ± 600/398.6 ± 30.0) versus its counterpart without a washer (2993 ± 527/349.7 ± 26.4), p = 0.026. In contrast, these two parameters did not reveal any significant differences when comparing fixations with and without a washer using either partially threaded short of fully threaded long transsacral screws, p ≥ 0.359. Conclusions: From a biomechanical perspective, a washer could be optional when using partially threaded short or fully threaded long transsacral S1-S2 screws for treatment of posterior pelvis ring injuries in young trauma patients. Yet, the omission of the washer in fully threaded short screws could lead to a significant diminished biomechanical stability.

Evaluation of Cannulated Compression Headless Screw (CCHS) as an alternative implant in comparison to standard S1-S2 screw fixation of the posterior pelvis ring: a biomechanical study

BACKGROUND/PURPOSE

Posterior pelvis ring injuries represent typical high-energy trauma injuries in young adults. Joint stabilization with two cannulated sacroiliac (SI) screws at the level of sacral vertebrae S1 and S2 is a well-established procedure. However, high failure- and implant removal (IR) rates have been reported. Especially, the washer recovery can pose the most difficult part of the IR surgery, which is often associated with complications. The aim of this biomechanical study was to evaluate the stability of S1-S2 fixation of the SI joint using three different screw designs.

METHODS

Eighteen artificial hemi-pelvises were assigned to three groups (n = 6) for SI joint stabilization through S1 and S2 corridors using either two 7.5 mm cannulated compression headless screws (group CCH), two 7.3 mm partially threaded SI screws (group PT), or two 7.3 mm fully threaded SI screws (group FT). An SI joint dislocation injury type III APC according to the Young and Burgess classification was simulated before implantation. All specimens were biomechanically tested to failure in upright standing position under progressively increasing cyclic loading. Interfragmentary and bone-implant movements were captured via motion tracking and evaluated at four time points between 4000 and 7000 cycles.

RESULTS

Combined interfragmentary angular displacement movements in coronal and transverse plane between ilium and sacrum, evaluated over the measured four time points, were significantly bigger in group FT versus both groups CCH and PT, p ≤ 0.047. In addition, angular displacement of the screw axis within the ilium under consideration of both these planes was significantly bigger in group FT versus group PT, p = 0.038. However, no significant differences were observed among the groups for screw tip cutout movements in the sacrum, p = 0.321. Cycles to failure were highest in group PT (9885 ± 1712), followed by group CCH (9820 ± 597), and group FT (7202 ± 1087), being significantly lower in group FT compared to both groups CCH and PT, p ≤ 0.027.

CONCLUSION

From a biomechanical perspective, S1-S2 SI joint fixation using two cannulated compression headless screws or two partially threaded SI screws exhibited better interfragmentary stability compared to two fully threaded SI screws. The former can therefore be considered as a valid alternative to standard SI screw fixation in posterior pelvis ring injuries. In addition, partially threaded screw fixation was associated with less bone-implant movements versus fully threaded screw fixation. Further human cadaveric biomechanical studies with larger sample size should be initiated to understand better the potential of cannulated compression headless screw fixation for the therapy of the injured posterior pelvis ring in young trauma patients.

Traumatic spinopelvic dissociation: A case series

Introduction

Spinopelvic dissociation was described first in 1969. It is an injury characterized by the separation of the lumbar spine, with parts of the sacrum, from the rest of the sacrum and pelvis with the appendicular skeleton through the sacral ala. Spinopelvic dissociation has an incidence of approximately 2.9% of all pelvic disruptions and corresponds with high-energy trauma. The objective of this study was to review and analyze a case series of spinopelvic dissociations that were treated in our institution from May 2016 to December 2020.

Methods

This was a retrospective study reviewing medical records of a series of cases with spinopelvic dissociating. A total of nine patients were encountered. Demographic data including gender and age were analyzed with the mechanism of injury, fracture characteristics, and classifications in addition to neurological deficits. Fractures were classified by the AO Spine Sacral Classification System. Moreover, neurological deficits were classified using the Gibbon's classification score. Finally, the Majeed score was utilized for the assessment of the functional outcome after the injury.

Results

A total of nine patients with spinopelvic dissociation were encountered, seven males and two females. Seven patients were due to motor vehicle accidents, one patient was due to a suicidal attempt, and one patient was due to seizure. Four patients suffered from neurological deficits. One patient needed an intensive care unit admission. Spinopelvic fixation was done for all patients. One patient had surgical wound infection with wound dehiscence, one had infected instruments with confirmed spine osteomyelitis, and one had a focal neurological deficit. Six patients went on to heal and showed complete neurological improvements.

Conclusion

Spinopelvic dissociation injuries represent a variety of injuries that are commonly associated with high-energy trauma. The triangular fixation method has proven to be a stable construct in dealing with such injuries.

Comparison of Three-Dimensional Navigation-Guided Percutaneous Iliosacral Screw and Minimally Invasive Percutaneous Plate for the Treatment of Zone II Unstable Sacral Fractures

OBJECTIVE

The percutaneous IS screws and the minimally invasive percutaneous plate are the most popular internal methods for Zone II unstable sacral fractures. However, the choice of fixation remains controversial for orthopaedic surgeons. The purpose of study was to evaluate and compare the clinical results of percutaneous iliosacral (IS) screw fixation under three-dimensional (3D) navigation and minimally invasive percutaneous plate fixation in the treatment of Zone II unstable sacral fractures.

METHODS

A retrospective study was performed, including 64 patients with Zone II unstable sacral fractures who underwent percutaneous IS screw fixation under 3D navigation (navigation group) and minimally invasive percutaneous plate fixation (plate group) from January 2011 and March 2021 in our department. The age, gender, fracture type, mechanism of injury, injury severity score (ISS), time from admission to operation, operative time, intraoperative blood loss, hospital stay, incision length, follow-up time, time to clinical healing, and complications were recorded and analyzed. Matta standard was used to assess fracture reduction outcomes. The Majeed function system assessed functional outcomes at the last follow-up.

RESULTS

The average follow-up time was (14.42 ± 1.57) months in the navigation group and (14.79 ± 1.37) months in the plate group. No statistical difference between the two groups in age, gender, fracture type, mechanism of injury, ISS, time from admission to operation, and time to clinical healing. However, significant differences were detected in operative time, intraoperative blood loss, hospital stay, and incision length (p < 0.001). According to Matta standard at 2 days postoperatively, the excellent and good rate was 91.42% in the navigation group, and it was 93.10% in the plate group. There was no significant difference between the two groups (p = 0.961). According to Majeed function system at the follow-up, the excellent and good rate was 97.14% in the navigation group, and 93.10% in the plate group. The difference between the two groups was not statistically significant (p = 0.748). There were no neurovascular injuries associated with this procedure. The incidence of complications was 44.82% (13/29) in the plate group, while 14.28% (5/35) in the navigation group (p = 0.007).

CONCLUSION

This study found that compared with minimally invasive percutaneous plate fixation, percutaneous IS screw fixation under 3D navigation is a suitable option for the treatment of Zone II unstable sacral fractures. This approach is characterized by its shorter operation time, less surgical trauma, less bleeding, less hospital time, and fewer complications.

Lumbopelvic Fixation with Bridged Distal Iliac Screws for Vertically Unstable Sacral Fractures

Purpose

The purpose of this study is to evaluate preliminary outcomes of vertically unstable sacral fractures treated by lumbopelvic fixation (LPF) augmented transiliac bridged screws.

Methods

From April 2017 to December 2019, fifteen consecutive patients with vertically unstable sacral fractures who had undergone LPF augmented transiliac bridged screws were enrolled. The radiological assessment included standard lumbopelvic x-rays and pelvic computed tomography (CT) to evaluate the lumbosacral angle (LSA), sacral kyphosis angle (SKA), lumbar lordosis angles (LLA) and Matta's reduction criterias (MRC). Clinical and neurologic impairment outcomes were evaluated by the Majeed grading scale (MGS) and Gibbons criterias, respectively.

Results

All patients were followed for an average of 18 months (range, 14-25). All sacral fractures eventually healed and implant failure did not occur in any patient, though there were two patients with a loss of reduction (< 5 mm) during the follow-up period. According to the MRC, the results were excellent on 14 sides, good on five sides, and fair on one side. The MGS mean score was 82 points (range, 49-98 points); the results were excellent in nine cases, good in four cases, and fair in two cases. There was no statistically significant difference in SKA and LLA in preoperative and postoperative final controls. The preoperative and postoperative LSA were 72 ± 13.9 and 44.1 ± 11.3, respectively, and a statistically significant improvement was observed (p = 0.01).

Conclusion

In vertically unstable sacrum fractures, we believe that LPF augmented with transiliac bridging technique may expedite the reduction of vertical sacrum fracture and offers a reinforced fixation choice.

Minimally invasive transiliac anatomical locking plate for posterior pelvic ring injury: A technical trick of the gull wing plate

Posterior pelvic ring injuries commonly involve sacral fractures, which are difficult to reduce and stabilize. Because conservative treatment requires long-term bedrest and leads to unsatisfactory outcomes, surgical intervention is a beneficial option to protect neurological structures and provide sufficient stability for early mobilization. Several studies have investigated a variety of internal fixation techniques, such as iliosacral screws, transiliac bars, spinal instruments, and transiliac plates. The gull wing plate (GWP) is a pre-contoured anatomical locking plate with two cancellous screws (φ6.5 mm) and four locking screws (φ5.0 mm), the design of which is unique among posterior tension-band plates. The GWP provides reliable stability of the posterior construct of the pelvic ring and accelerates rehabilitation. Compared to alternative surgical techniques for posterior fixation, the simple surgical procedure of the GWP is minimally invasive and highly reproducible, which leads to fewer complications and less radiation exposure.

Minimally invasive transiliac anatomical locking plate for posterior pelvic ring injury: a retrospective analysis of clinical outcomes and radiographic parameters for the gull wing plate

Background

Posterior pelvic ring injuries are challenging for surgeons to treat adequately due to difficulties with reduction and stabilization. Surgical intervention is a beneficial option to protect neurological structures and provide sufficient stability for early mobilization. The gull wing plate (GWP) is a pre-contoured anatomical locking plate with six screws, and its design is unique among posterior transiliac tension-band plates. The purpose of this study was to investigate clinical results of the GWP.

Methods

Patients who had an unstable posterior pelvic ring injury and underwent internal fixation with GWP were retrospectively analyzed at a trauma center. Demographic data, fracture type, perioperative data, and radiological evaluation with computed tomography (CT) were collected. Clinical outcomes were graded using the functional independence measure (FIM) and Majeed outcome score.

Results

Twenty-six patients were enrolled (mean age, 54 years), and the mean follow-up period was 23 months. The mean Injury Severity Score was 24 points, and internal fixation was performed 6.6 days post-trauma. CT evaluation showed the lateral surface angle of the uninjured ilium was approximately 68°. The GWP pre-contoured anatomical design closely matched this angle. The mean FIM and Majeed score were 119 and 76 points, respectively, which were graded as excellent (n = 14), good (n = 9), or fair (n = 3).

Conclusions

With the retrospective single-center data available, the GWP seems to be a minimally-invasive alternative, provides reliable stability of the posterior pelvic ring and allows for rehabilitation within normal ranges.

Technical Note on Placement of Low-Profile Triangular Osteosynthesis for Unstable Posterior Pelvic Ring Injuries

SUMMARY

Triangular osteosynthesis is a technique used to stabilize posterior pelvic ring injuries. Conventional triangular fixation can be problematic for several reasons, including the need for advanced skill sets to place instrumentation, difficulty with pelvic reduction and placing the connecting construct, and prominent instrumentation. The purpose of this study is 2-fold: (1) to describe in detail a technique for lumbopelvic fixation using implants that are easy to connect, allow distraction for complex lumbosacral displacements, and are placed in a location minimizing soft tissue prominence and (2) to present our initial case series using this technique. We present a retrospective review of 18 consecutively treated patients with this technique. Inclusion criteria were patients with complete disruption through the sacrum or sacroiliac joint from blunt trauma (OTA/AO type C injuries). Outcomes included pelvic reduction/malreduction, wound healing, and complications. Fourteen patients underwent unilateral fixation (81%), and 4 patients underwent bilateral fixation (19%). All patients (18 of the 18) had a well-reduced pelvis after fixation. No patient (0%) required a return trip to the operating room for loss of reduction/malreduction, wound breakdown, or implant failure. This study presents an updated technique for a low-profile triangular osteosynthesis construct with straightforward application for unstable posterior pelvic ring injuries. This technique does not require rod bending, results in a consistently more recessed iliac screw and connecting rod, and can be used in a wide variety of unstable posterior pelvic ring injuries, including comminuted sacral fractures, L5/S1 facet fractures, and vertical shear injuries.

Percutaneous posterior transiliac plate versus iliosacral screw fixation for posterior fixation of Tile C-type pelvic fractures: a retrospective comparative study

BACKGROUND

This study aimed to compare the clinical outcomes and complications between two minimally invasive surgical techniques: percutaneous transiliac plate fixation and iliosacral (IS) screw fixation for the treatment of Tile C-type pelvic bone fractures.

METHODS

We retrospectively reviewed the data of 77 consecutive patients with Tile C pelvic ring injuries who underwent either percutaneous transiliac plate fixation or IS screw fixation in a single academic center between November 2007 and January 2018. We recorded patients' demographics, surgery-related data, and postoperative surgical outcomes and compared the incidence of complications and revision surgery rates between the two groups.

RESULTS

Overall, 14 patients were included in the plate group, while 63 were included in the IS screw fixation group. No significant differences were observed in the patients' demographics between the two groups except for a longer interval from injury to surgery (13.5 days vs. 5.4 days, P = 0.001). Both groups acquired fracture union in all cases. There was one case of infection requiring surgical debridement in the plating group. Notably, nerve injury (n = 3) and implant loosening (n = 5) occurred in the IS screw group, but the difference was not significant.

CONCLUSIONS

Both percutaneous posterior transiliac plating and IS screw fixation in patients with Tile C-type pelvic bone fractures showed good results. We recommend IS screw fixation as the primary treatment and propose posterior plating as treatment for sacral dysmorphism and bilateral sacral alar fractures in patients with spinopelvic dissociation.

LEVEL OF EVIDENCE

III.

A clinical and biomechanical comparison of INFIX plus single versus double sacroiliac screw fixation for unstable pelvic ring injury

BACKGROUND

The aim of this study is to compare the clinical and biomechanical outcome of INFIX plus single with two sacroiliac screw fixation for unstable pelvic fractures of Type C.

METHODS

Sixteen cadavers were randomly subjected to INFIX plus single or double sacroiliac screw fixations and then mounted onto the ElectroForce loading machine under different vertical loads. To investigate the clinical outcomes of the two techniques, nineteen patients were retrospectively analyzed. The main outcome measures were postoperative radiographic reduction grading (using the Tornetta and Matta grading system), functional outcome (using the Majeed scoring system), and incidence of complications.

RESULTS

In the biomechanical study, INFIX plus double sacroiliac screw fixation showed better biomechanical stability than fixation with a single sacroiliac screw (p < 0.05). In our clinical case series, all 19 patients had bony union 6 months after the operation. INFIX plus double sacroiliac screw fixation also demonstrated a better functional outcome and a higher radiographic satisfactory rate than INFIX plus single sacroiliac screw fixation (79.25 ± 5.47; 91.33 ± 4.97; p < 0.05), (77.78% vs. 60%; p = 0.05). One patient in INFIX plus single-screw fixation group had screw loosening at 6-month follow-up postoperatively. One case in each group suffered heterotopic ossification and the lateral femoral cutaneous nerve paralysis, and one patient suffered from infection.

CONCLUSION

INFIX plus double sacroiliac screw fixation demonstrated more stability in cadaveric biomechanical analysis and better clinical outcomes than INFIX plus single sacroiliac screw fixation.

Minimally Invasive Percutaneous TightRope® System Fixation for an Unstable Posterior Pelvic Ring: Clinical Follow-up and Biomechanical Studies

Objective

To evaluate the mechanical stability and clinical efficacy of minimally invasive percutaneous TightRope® systems applied via gun‐shaped reduction forceps for unstable posterior pelvic ring fractures.

Materials and methods

This study consists of two parts: a clinical retrospective study and a randomized controlled biomechanical test. For the clinical study, a retrospective analysis of posterior pelvic ring fractures was performed between June 2015 and May 2020. Eighteen patients underwent surgery using two TightRope® systems to fix a broken posterior pelvic ring because of unstable AO type C1 and C2 pelvic ring fractures. The patients were followed up for at least 2 years, and all patients were evaluated using the Majeed scoring system and vertical displacement. In the biomechanical tests, six embalmed adult pelvic specimens were used. The fractures were subjected to TightRope®, IS screw, and TBP fixation in a randomized block design. The specimens were placed in a biomechanical testing machine in a standing neutral posture. A cyclic vertical load of up to 500 N was applied, and the displacement of the specimens was recorded by the testing machine. The ultimate load in each group of specimens was recorded. The displacement and ultimate load were compared and analyzed by statistical methods.

Results

At a mean follow‐up of 38.89 ± 8.72 months, the functional Majeed score was excellent in 14 patients and good in four patients. The final radiological examinations showed that the outcome was excellent in 14 patients and good in four patients. In these patients, no serious clinical complications were found. Weight‐bearing was delayed in four patients. In biomechanical tests, the displacement of the specimens fixed with TightRope® was significantly lower than that of the specimens fixed with TBP (P < 0.05) when the load ranged from 300 to 500 N. The displacement in the IS screw group was significantly lower than that in either the TBP or TightRope® group (P < 0.05) when the load ranged from 0 to 500 N. The ultimate load in the IS screw group (1798 ± 83.53 N) was significantly greater than that in the TBP group (1352 ± 74.41 N) (t = 9.78, P < 0.0001) and the TightRope® group (1347 ± 54.28 N) (t = 11.11, P < 0.0001). However, no significant difference was observed between the TightRope® and TBP groups (t = 0.13, P = 0.90).

Conclusion

Percutaneous posterior TightRope® system shows strong stability in mechanical experiments and shows good results in clinical follow‐up while this system has certain advantages in lower surgical requirements and lower risk of related nerve and vascular structural damage.

What's old is best again Is anterior plating best for fixation of type-C pelvic fractures? A systematic review and meta-analysis

BACKGROUND

Type-C pelvic fractures are a rare but potentially fatal injury that often leads to poor outcomes, despite surgical fixation. Many fixation methods are used but the optimal method remains contentious, with failure and complications common. This study compared outcomes for each fixation method.

METHODS

A systematic review was conducted according to the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA). A search of studies which reported on outcomes after surgically treated type-C pelvic fractures was undertaken. Data retrieved included fixation method, length of follow up, surgical revision, and complications rates (hardware breakage, post-operative outcomes, screw mal-positioning, screw loosening, loss of reduction and infection). Study quality was assessed using the Methodological Index for Non-Randomised Studies (MINORS). Pooled revision, outcome and complication rates were calculated using a quality-adjusted model in MetaXL 5.3.

RESULTS

Fifty-two studies met the inclusion criteria representing 1567 patients and 7 fixation methods. The meta-analyses demonstrated high rates of 'less-than-good' outcomes for most fixation methods, with a higher rate for bilateral injuries (overall 23%; unilateral 21% v bilateral 41%). The mean pooled rate for surgical revision rate was 4%, hardware breakage 3%, screw mal-positioning 2%, screw loosening 3%, loss of reduction 5% and infection 4%. Each fixation method had different performance profiles; however, anterior plating outperformed all other fixation methods for patient outcomes, with a 'less-than-good' rate of just 7% vs the pooled mean of 23% and demonstrated at or below pooled mean rates for all complications except revision which was 5%.

CONCLUSIONS

Post-operative outcomes for surgically treated type-C pelvic fractures revealed a 'less-than-good' pooled outcome rate of 23% and a revision rate of 4%. Anterior plates outperformed most other systems particularly for patient reported outcomes. Pooled revision, patient-reported outcome and complication rates for type-C pelvic fractures have not previously been reported and these data provide a benchmark for practice and future research.

Management of a Close-Range High-Velocity Gunshot Wound to the Pelvis with Posterior Pelvic Plating: A Case Report

CASE

A 31-year-old woman suffered a close-range, high-energy .30-rifle gunshot wound to her right ilium and sacrum resulting in an unstable pelvic ring injury with significant internal soft-tissue damage and bone loss. Given the limited amount of literature for managing this rare clinical scenario in a civilian setting, we described our protocol used on this patient to achieve a safe and effective result.

CONCLUSIONS

We present a civilian-inflicted high-velocity pelvic gunshot injury at close range. Although the patient had extensive pelvic bone loss and soft-tissue damage, she had excellent clinical results at 18-month follow-up after delayed posterior sacral bridge plating. Proper soft-tissue management and posterior sacral plating may yield good results for management of this type of injury.

Unilateral lumbopelvic fixation for AO/OTA Type C1 and C2 pelvic fractures: Clinical efficacy and preliminary experiences in 23 patients

PURPOSE

To report the clinical outcomes and preliminary experiences of unilateral lumbopelvic fixation for patients with AO/OTA Type C1 and C2 pelvic fractures.

MATERIALS AND METHODS

Between May 2014 and Dec 2017, 23 consecutive patients with AO/OTA Type C1 and C2 pelvic factures were treated by unilateral lumbopelvic fixation. Estimated blood loss, operation duration, reduction quality, functional outcomes using Majeed scores and complications were evaluated. Subgroup analysis was used to assess the influence of unilateral lumbopelvic fixation on different type of pelvic fractures.

RESULTS

Fifteen patients with Type C1 pelvic fractures and eight patients with Type C2 fractures underwent unilateral lumbopelvic fixation respectively. The mean follow-up time till May 2019 was 34.3 ± 9.9 months (range 17-60 months). Mean estimated blood loss was 473 ml and mean operation duration was 156 min during unilateral lumbopelvic fixation. The mean vertical displacement of pelvis decreased from 10.1 ± 4.9 mm to 3.1 ± 1.9 mm after unilateral lumbopelvic fixation. Majeed score assessments were available for 22 patients. Of these, 13 patients were graded as excellent, 8 were good and one was fair. The results of subgroup analysis showed that there was no difference of estimated blood loss, operation duration, postoperative displacements of pelvis and Majeed scores between the patients with Type C1 and C2 fractures.

CONCLUSION

Unilateral lumbopelvic fixation could provide a well reduction quality and was an effective treatment for AO/OTA Type C1 and C2 pelvic fractures.

STUDY DESIGN

Retrospective evaluation of 23 consecutive patients with AO/OTA Type C1 and C2 pelvic fractures treated by unilateral lumbopelvic fixation.

Cross-Cultural Adaptation and Psychometric Properties of the Lithuanian Version of the Majeed Pelvic Score

Background and Objectives: There are no valid patient-based pelvic ring function assessment tools in Lithuania. The most widely used instrument is the Majeed Pelvic Score (MPS), which is proven to be an effective tool for assessing pelvic function after pelvic injuries. The aims of our study were: (1) the translation and cross-cultural adaptation of the MPS for the Lithuanian-speaking population, (2) to test the psychometric properties of the Lithuanian version of the MPS (MPS-LT) at follow-up two-time points after pelvic fractures. Materials and Methods: The MPS was translated and culturally adapted. Psychometric properties of the MPS-LT were determined in one patient group (n = 40) at two time-points during follow-up examination from 1.5 to 3 months (mean 2 months) and from 11 to 20 months (mean 12 months). Results: At the mean time of 2 months after trauma, Cronbach’s α of the MPS-LT was 0.65. Correlation of the MPS-LT with the Iowa Pelvic Score (IPS) was r = 0.84 (p < 0.001), and with the Lithuanian SF-36, PCS was r = 0.53 (p < 0.001). At the mean time follow-up of 12 months, Cronbach’s α was 0.86, correlation with the IPS was r = 0.92 (p < 0.001), and with the Lithuanian SF-36, PCS – r = 0.82 (p < 0.001). At the 2-month follow-up, neither floor nor ceiling effects were reached, but at 12 months, 27.5% of patients reached the ceiling effect, while none reached the floor effect. The effect size of the MPS-LT was 1.66. Conclusions: The MPS-LT has limited ability to measure functional outcomes at 2 months after pelvic fracture. In contrast, at the 12-month follow-up examination, the MPS-LT had a good ability to assess pelvic function, and it was sensitive to health changes. The MPS-LT can be used as a pelvic function assessment tool after pelvic fractures for the Lithuanian-speaking population.

Traumatic spinopelvic dissociation managed with bilateral triangular osteosynthesis: Functional and radiological outcomes, health related quality of life and complication rates

BACKGROUND

Spinopelvic dissociation (SPD) is difficult to manage and is associated with high mortality and morbidity, including concomitant orthopaedic polytrauma, spine injuries, pelvic ring disruptions, neurological, soft-tissue, and vascular injuries. The purpose of this study is to evaluate the functional and radiological outcomes; health related quality of life and complication rates of patients with traumatic spinopelvic dissociation underwent bilateral triangular osteosynthesis (TOS).

METHODS

The study was approved by the medical school's institutional review board (IRB). Prospective data collection of nineteen consecutive cases of traumatic SPD were included in the study from October 2015 to August 2018. Bilateral TOS was performed to manage all patients with SPD. The clinical outcome for fractures was analyzed with Majeed function assessment. Health Related Quality of Life (HRQoL) was assessed with the EQ-6D questionnaire. The reduction quality was evaluated according to Matta criterion. CT scanning was used to verify the fracture union in patients at 24^th weeks postoperatively.

RESULTS

There were 12 women and 7 men with an average age of 47.2±8.4 years (range, 17-62 years). The average follow-up time was 25.2±3.7 months (average, 22-45 months). The most common mechanism of injury was falling (57%). According to Majeed functional scoring, the results were excellent in 12 cases, good in 5 cases and fair in 2 cases. The median EQVAS score was 78.9±8.4. 15 patients (78.9%) turned back to their original occupation. Pain and mood disorders mainly influenced patients' present general health status. According to Matta criterion for fracture reduction, the results were excellent in 14 cases, good in 4 cases and fair in 1 case. Complications were noted as wound healing problems (26%), implant loosening (5%) and iatrogenic nerve injury (5%).

CONCLUSION

Bilateral TOS demonstrates satisfactory functional and radiological outcomes with low complication rates except infection rate in patients with traumatic spinopelvic dissociation. HRQoL is mainly dominated by pain and mood disorders. 78.9% of the patients turned back to their original occupation. Surgeons should be aware of wound healing problems in case of increased muscle mobilization and degloving injuries.Implant removal is required to improve the lumbopelvic mobility.

Percutaneous triangular stabilization of type 3 and type 4 fragility fractures of the pelvis usually leads to fracture healing despite high revision rates

This is a monocentric, retrospective study to analyze radiological findings as well as perioperative and postoperative complications in patients who underwent percutaneous triangular stabilization of type 3 and type 4 fragility fractures of the pelvis. From August 2017 to December 2018, 20 patients were treated surgically. Thirteen patients (65%) were followed-up and received a CT scan of the pelvis after an average time of 14.8 months. A total of 5 patients (38%) had to undergo revision surgery, 2 patients (15%) immediately, 3 patients (23%) in the interval. In 84.6% no fracture line was visible in the sacrum. Fracture healing of the anterior pelvic ring was observed in all cases. Our results show that percutaneous triangular stabilization of type 3 and type 4 fragility fractures of the pelvis usually leads to fracture healing. Radiological signs of loosening were observed in 62%, an implant removal due to symptomatic loosening was necessary in 23%.

Spinopelvic Dissociation: Assessment, Reduction Strategies, and Fixation Techniques

Spinopelvic dissociation is a rare injury associated with 2% to 3% of transverse sacral fractures and 3% of sacral fractures associated with pelvic ring injuries. When spinopelvic dissociation is expediently identified and treated appropriately, patient outcomes can be maximized, highlighting the importance of early diagnosis and treatment. Because of its rarity and complexity, there remains a paucity of high-level evidence-based guidance on treating this complex issue. No consensus exists on fixation techniques or reduction maneuvers to achieve stability, allowing for early functional rehabilitation. The purpose of this article is to review the current body of literature to better understand this injury pattern to help establish a treatment algorithm that appropriately guides the treating surgeons in the surgical planning and perioperative care of these patients.

Lumbopelvic Fixation Versus Novel Adjustable Plate for Sacral Fractures: A Retrospective Comparative Study

Purpose: The purpose of this study is to compare the therapeutic effects of the lumbopelvic technique and a novel adjustable plate for sacral fractures. Materials and Methods: Patients with unilateral sacral fractures fixed via the lumbopelvic technique or using a novel adjustable plate from June 2011 to June 2017 were recruited into this study and were divided into two groups: group A (lumbopelvic fixation) and group B (novel adjustable plate). Surgical time, intraoperative blood loss, frequency of intraoperative fluoroscopy, reduction quality, and related complications were reviewed. Fracture healing was assessed by the radiographs conducted at follow-up. Functional outcome was evaluated according to the Majeed score at the final follow-up. Results: The mean blood loss and frequency of intraoperative fluoroscopy in group B were reduced compared with group A (both P < 0.001). The mean surgical time was 122.22 ± 13.09 minutes in group A and 103.96 ± 24.80 minutes in group B (P = 0.007). All patients healed well in this study, and no difference in the fracture healing time was noted between the two groups (P = 0.685). Satisfactory rates of reduction quality and functional outcome did not differ (both P > 0.05) in this study. The complication rate was 22.22% (4/18) in group A and 4.16% (1/24) in group B (P = 0.191). Conclusion: For patients with unilateral sacral fractures, satisfactory radiographic appearance and functional outcome could be obtained by both the lumbopelvic technique and a novel adjustable plate. However, the novel adjustable plate represents a less invasive technique with lower radiograph exposure.

Posterior transiliac plating in vertically unstable sacral fracture

The aim of the present technical note is to describe the posterior transiliac plating method. Acute-phase clinical and radiological results in a continuous series of 10 vertically unstable fractures are presented. Reduction was good or excellent in 70% of cases, and clinical results were good or excellent in 80% on Hannover and Majeed scores, with mean Majeed score of 71.8±17. Complications comprised 3 cases of early postoperative sepsis requiring surgical lavage, and 4 cases of hardware removal due to discomfort. At last follow-up, consolidation was systematic. Reduction was more difficult with longer time to surgery and greater initial displacement. Posterior transiliac plating provided immediately effective fixation in vertically unstable pelvic fracture.

Inaccuracies in the Use of the Majeed Pelvic Outcome Score: A Systematic Literature Review

OBJECTIVES

To evaluate the accuracy with which the Majeed Pelvic Score has been reported in the English literature.

DATA SOURCES

Databases used to search for literature were PubMed, Embase, and Ovid, restricted to English language from inception to October 2, 2018.

STUDY SELECTION

Search words used were: Majeed, pelvis, and outcome.

DATA EXTRACTION

Articles were assessed for descriptions of scoring and proper reporting of Majeed Pelvic Outcome Score.

DATA SYNTHESIS

Descriptive statistics were used to report the outcome of our findings.

CONCLUSIONS

Ninty-two English articles were identified. Twenty-four (26%) articles were identified as including methodology related to the use and scoring of the Majeed Pelvic score. The remaining 68 presented mean Majeed scores with no methodological information. None (0/92) discussed how the range of possible scores for the most severe function was applied. Six (7%) reported adjusted scores for patients not working. Three (3%) included a discussion of the scores as adjusted for patients working before injury compared with those not working. Ten (11%) addressed the categorization of scores by excellent to poor describing what raw scores defined those categories. We observed poor accuracy and notable inconsistency in the use and reporting of the Majeed Pelvic Outcome Score in the literature. These data demonstrate that interpretation and comparison of research reporting this score should be done cautiously. Future studies should include specific information as to how the Majeed instrument calculated to allow for verification of the presented scores and subsequent conclusions.

Robotic assisted fixation of sacral fractures: A pilot study

Objectives:

Sacral fractures that require fixation are a challenge for the orthopaedic surgeon. Due to anatomical consideration, implant insertion is not risk free, and requires a steep learning curve. A robotic system has been successfully used in pedicle screws insertion and can be also used for iliosacral screws. The aim of the study was to demonstrate the use of the robot in the treatment of unstable sacral fractures.

Design:

Retrospective case series.

Setting:

An academic level I trauma center.

Patients:

Fourteen patients with sacral fractures were eligible for robotic assisted treatment. These included 9 high-energy fractures, 4 osteoporotic fractures, and 1 pathological fracture.

Intervention:

Fixation constructs included iliosacral screws, transiliac screws, lumbopelvic fixation, sacroplasty, or a combination of the above techniques. A Renaissance robot was mounted on a multidirectional bridge that was attached to the patients spine and implant trajectories were planned either on preoperative or intraoperative 3D scans. Guide wires were inserted percutaneously and screws were placed subsequently.

Main outcome measurements:

Accuracy of implant placement, operating room and fluoroscopy time.

Results:

Mean patient age was 36 (17–84), and number of screws, including iliosacral and pedicular ranged 1–14 per patient (average 4.25). Mean operative time was 150 minutes (range 90–300). Average fluoroscopic time was 18 seconds (7–42) for 2D and 40 seconds (12–72) for 3D imaging. All fractures healed, no hardware failure was observed. All hardware was always within bony confines, and no procedure-related neurological deficits were observed.

Conclusion:

Robotic assisted fixation of sacral fracture is a safe and reproduceable method, allowing precise and accurate implant placement.

Posterior tension band plate osteosynthesis for unstable sacral fractures: A preliminary study

INTRODUCTION

Stable reduction and rigid fixation of the sacrum and posterior ring structures are of paramount importance in the management of complex pelvic ring disruptions, Tile B and C. The major concern with the use of conventional methods, like iliosacral screws and iliolumbar fixations is the increased risk for surgical and implant-related morbidity, especially in difficult situations, such as comminuted, bilateral sacral fractures, and fractures in the dysmorphic sacrum. Although various biomechanical studies have reported the posterior trans-iliac plates to provide maximum resistance to distracting forces by the principle of tension band, the literature pertaining to this implication in clinical studies has been limited. The purpose of our study was to assess the efficacy of the trans-iliac plate in the management of unstable sacral fractures and its utility in pelvic disruptions associated with surgical site morbidity.

METHODOLOGY

The patients with unstable pelvic fractures (Tile B and C) between 2013 and 2017 were retrospectively analyzed at a trauma center. First, the anterior ring disruptions were stabilized, and then, the sacral fractures (Denis Zone 1-3) treated by posterior tension band plate osteosynthesis (3.5 mm reconstruction plate) were included. Demographic and perioperative data were assessed. The outcome variables studied were surgical morbidity, pain, loss of reduction, and union and implant-related complications. The outcomes were graded using Lindhal's (radiological) and Majeed (functional assessment) scores.

RESULTS

Thirteen patients (nine male/four female) with a median age of 42 years, had sacral fractures in Denis zones 1/2/3 (four/ten/one, respectively), resulting from Tile pelvic injury B and C were included. The pelvis in five patients was stabilized only with the posterior plate due to the anteriorly-associated surgical site morbidity (Morel-Lavallee lesions and urinary tract injuries). The mean follow-up was 21.5 ± 2.8 months. All fractures had a radiological union by 22 weeks; Lindhal's grade A in ten patients and grade B in three patients. Two out of three patients recovered from preoperative neurological involvement. Two had complained of implant prominence (BMI<19 kg/m²) and there were no implant failures. Four had excellent, six had good, and three had fair or poor functional outcomes.

CONCLUSION

The posterior trans-iliac plate is a minimally invasive and safe procedure that can be used in a wide range of unstable sacral fractures with notably less implant failure rate. The rigid posterior construct restores the principle tension between the iliac blades and minimizes the secondary displacement of the anterior disrupted structures, thereby useful in managing ring disruptions with surgical site morbidity.

Minimally invasive triangular osteosynthesis for highly unstable sacral fractures: Technical notes and preliminary clinical outcomes

Triangular osteosynthesis involves unilateral L5 iliac posterior instrumentation combined with an iliosacral screw fixation. The aim of this study was to describe this procedure and report the preliminary clinical results in patients with unstable sacral fractures treated with minimally invasive triangular osteosynthesis (MITO). Between 2012 and 2017, 10 patients (6 men and 3 women, mean age, 50 ± 23 years) with sacral fractures were treated with MITO and were followed up for a mean of 15.0 ± 8.5 months in our institution. Classification of sacral fracture, operative time, intraoperative bleeding, timing of full weight bearing, bone union, complications, and clinical outcomes were investigated. Two cases were classified as Denis zone 1, 2 cases as zone 2, and 6 as zone 3. Four patients had Roy-Camille type 1 fracture and 2 patients had type 2. All patients underwent MITO, which involved bilateral lumbopelvic fixation and a uni/bilateral iliosacral screw with stab incisions for percutaneous fixation or central longitudinal incision. The operative time was a mean of 182 ± 64 minutes, and the amount of intraoperative bleeding was a mean of 63 ± 74 g. Full-weight bearing was initiated at a mean of 8.2 ± 2.4 weeks. Eight fractures healed; 1 patient had pulmonary embolism and 1 had implant loosening. Based on Majeed score, 8 patients had "excellent" clinical outcomes, 1 patient had a "good" clinical outcome, and the other had a "fair" clinical outcome. MITO could be less invasive on the soft tissues and be a reliable procedure for bony union. It might provide sufficient stability to accelerate the commencement of post-operative rehabilitation, even in patients with highly unstable sacral fractures.

Biomechanical comparison of three kinds of fixation in fracture-dislocation of the sacroiliac joint

BACKGROUND

Although there are several different kinds of fixation techniques for the sacroiliac fracture-dislocation, the treatment remains a challenge for orthopedic surgeons.

OBJECTIVE

The purpose of this study was to compare the stability of sacroiliac fracture-dislocation fixed with two iliosacral (IS) screws, tension band plate (TBP), and minimally invasive adjustable plate (MIAP).

METHODS

Five human cadavers (L4-pelvic-femora) were used to compare biomechanical stability. The pubic symphysis separation and left sacroiliac dislocation were created. The symphysis pubis was stabilized with a five-hole plate. The sacroiliac joint dislocation fracture was fixed with three kinds of internal fixation in a randomized design. The specimens were fastened in a biomechanical machine with a cycle vertical load. Displacements of the whole specimen and shifts in the fracture gap were recorded.

RESULTS

Under different vertical loads, the shifts in the fracture gap and the displacements of the pelvis fixed with MIAP were similar to those in fractures fixed with two IS screws. However, the shifts in the fracture gap and the displacements of the pelvis fixed with MIAP were significantly smaller than those fixed with TBP.

CONCLUSIONS

The stability of the sacroiliac joint dislocation fixed with MIAP was similar to that of dislocation fixed with two IS screws, and MIAP performed better than the TBP under vertical load.

Comparison of Efficacy between 3D Navigation-Assisted Percutaneous Iliosacral Screw and Minimally Invasive Reconstruction Plate in Treating Sacroiliac Complex Injury

The clinical efficacy was compared between 3D navigation-assisted percutaneous iliosacral screw (3DPS) and minimally invasive reconstruction plate (MIRP) in treating sacroiliac complex injury and the surgical procedures of 3DPS were introduced. A retrospective analysis was performed on 49 patients with sacroiliac complex injury from March 2013 to May 2017. Twenty-one cases were treated by 3DPS, and 28 cases by MIRP. Intraoperative indexes as operative time, blood loss, incision length, length of hospital stay and postoperative complications were respectively documented. Quality of reduction was postoperatively evaluated by Matta radiological criteria, and clinical effect was assessed by Majeed scoring criteria at the last follow-up. Operative time and hospital stay were significantly shortened, and blood loss, and incision length were significantly reduced in 3DPS group as compared with those in MIRP group (P<0.05). No statistically significant difference was found between 3DPS group and MIRP group in the assessment of reduction and function (P>0.05). It was concluded that both 3DPS and MIRP can effectively treat the sacroiliac complex injury, and 3DPS can provide an accurate, safe and minimally invasive fixation with shorter operative time and hospital stay.

Clinical application of a minimally invasive cement-augmentable Schanz screw rod system to treat pelvic ring fractures

PURPOSE

The purpose of this study is to analyze the results using the USS fracture MIS system (DePuy Synthes) to treat instable pelvic ring fractures. As its outstanding feature, it is the only Schanz screw and rod system at present that combines angular stability, perforation/fenestration of the screws for cement-augmentation, a variable screw length, and a large screw diameter.

MATERIALS AND METHODS

Retrospective investigation of 134 pelvic ring fractures treated in 2012-2013. Twenty-five patients obtained the abovementioned implant. Besides baseline characteristics of the included patients and the surgical procedure, a clinical/radiological follow-up of six months was analyzed.

RESULTS

Dividing the collective into two groups, I high-energy trauma and II fragility fracture of the pelvis, the following results were recorded: group I: ten patients, six male, age 48.4 ± 19.7 years. Mean ISS 41 ± 22.5, fracture classification: AO/OTA type 61 B1/C1/C3 = 1/5/4. Operative treatment: three transiliac internal fixator, seven iliolumbar fixation, one implant was cement-augmented. Group II: 15 patients, 14 female, age 77.5 ± 10.1 years. Fracture classification according to Rommens: FFPII/III/IV = 6/1/8. Operative treatment: eight transiliac internal fixator, seven iliolumbar fixation, 14 implants were cement-augmented. Overall surgical side complications: 16%. Radiological examination: correct positioning of all ilium screws. Follow-up after six month (16 patients): all showed fracture consolidation. One ilium screw was broken close to the connecting clamp.

CONCLUSION

The investigated Schanz screw rod system is a suitable implant to broaden the established procedures to stabilize dorsal pelvic ring fractures.

TRIAL REGISTRATION

The study is registered at the Clinical Trial Registry University of Regensburg (Number Z-2017-0878-3).

Long-Term Patient-Reported Functional Outcome of Polytraumatized Patients With Operatively Treated Pelvic Fractures

OBJECTIVES

To report the long-term functional outcome of a cohort of patients with operatively treated unstable pelvic fractures using validated patient-reported outcome measures.

DESIGN

Long-term observational study using prospective and retrospective data.

SETTING

Tertiary referral pelvic trauma center, Bristol, United Kingdom.

PATIENTS

Seventy-four polytraumatized patients with operatively treated unstable pelvic ring injuries (50 OTA/AO type B and 24 OTA/AO type C, mean Injury Severity Score 17) treated between 1994 and 2005.

INTERVENTION

Sixty-four (86%) patients were treated with internal fixation. The remaining 10 patients (14%) were treated with either combined percutaneous posterior fixation and anterior external fixation or external fixation in isolation.

MAIN OUTCOME

Patient-reported functional outcome.

MEASUREMENTS

Short Form-36, with UK norm-based comparator scores and EQ-5D-3L.

RESULTS

Patients were between 11 and 22 years after injury (mean 15 years). We found no significant association between fracture classification and outcome score, but compared with age- and sex-matched scores for a UK population, differences were statistically significant in 3 of the 8 domains of health: physical function (P = 0.04), bodily pain (P = 0.001), and vitality (P = 0.001). The level of disability remained constant for these patients compared with their patient-reported outcome measure scores reported 8 years previously.

CONCLUSION

Patients who sustain an unstable pelvic fracture continue to have significant functional limitations compared with an uninjured population. These changes were not found to be related to age, injury pattern, genitourinary injury, or neurological injury. Functional outcome scores did not change over the 2 long-term time points.

LEVEL OF EVIDENCE

Therapeutic Level IV. See Instructions for Authors for a complete description of levels of evidence.

Patient Weight-bearing after Pelvic Fracture Surgery-A Systematic Review of the Literature: What is the Modern Evidence Base?

Background

Little attention in the literature appears to have been paid to the issue of postoperative weight-bearing protocols for different injury patterns after pelvic fracture surgery. The primary aim of this study is to review the currently available literature to define the level of available evidence used to inform surgical decisions on weight-bearing after pelvic fracture surgery. Secondary aims are to assess the published methods of fracture classification, surgical management, and assessment or reporting of patient outcomes.

Methods

A systematic review of the English language literature from 1990 to 2016 was undertaken. Eligible papers were all papers reporting minimum 6-month outcomes following surgery for pelvic fractures in adults. Exclusion criteria included pathological fractures or those resulting from penetrating injury, solely osteoporotic fractures, or series with less than 6 months of follow-up data.

Results

There is very little published scientific data to inform the treating surgeon on postoperative weight-bearing protocols after pelvic fracture surgery, with no randomized trials and only 1 paper out of 122 stating this as a primary aim. More than half of the papers published did not state what postoperative protocol was employed. There is no standardization of outcome measures, with less than 20% of papers using the most common validated outcome scoring system; in contrast, there is good agreement on the use of either the Tile (75%) or Burgess and Young (20%) classification.

Limitations

Due to the lack of published studies looking at the topic of postoperative weight-bearing after pelvic fractures, no specific recommendations are possible. As large numbers of papers were included, they were not individually assessed for bias.

Conclusion

A review of postoperative weight-bearing regimes reveals a nonexistent scientific evidence base from which to make recommendations, although a consensus strategy has been identified. Future research needs to be directed at this topic, as has already been the case in numerous other fracture areas, since the advantages of early mobility are potentially significant. The reported methodology for assessing and reporting patient outcomes after pelvic fracture surgery reveals no consistent standards, and the majority of papers use no specific outcome scoring system.

How to cite this article

Rickman M, Link B-C, Solomon LB. Patient Weight-bearing after Pelvic Fracture Surgery-A Systematic Review of the Literature: What is the Modern Evidence Base? Strategies Trauma Limb Reconstr 2019;14(1):45-52.

Single-Needle Lateral Sacroplasty Technique

Sacral insufficiency fractures result in significant morbidity, and percutaneous sacroplasty has emerged as a promising technique for their treatment. We present a technical note regarding our method of treating these fractures using a "single-needle" lateral technique with a combination of conebeam CT and biplane fluoroscopy. We treated 10 patients, in whom the median Visual Analog Scale pain score decreased from 7.0 to 0 (P < .001). We concluded that single-needle sacroplasty is feasible and safe using this technique.

[Treatment of unstable pelvic fractures by cannulated screw internal fixation with the assistance of three-dimensional printing insertion template]

Objective

To evaluate the effectiveness of unstable pelvic fractures treated by cannulated screw internal fixation with the assistance of three-dimensional (3D) printing insertion template.

Methods

The clinical data of 10 patients who underwent surgical treatment for unstable pelvic fractures by cannulated screw internal fixation with the assistance of 3D printing insertion template between May 2015 and June 2016 were retrospectively analysed. There were 7 males and 3 females with an average age of 37.5 years (range, 20-58 years). The causes of injury included falling from height in 5 cases, crushing from heavy load in 1 case, and traffic accidents in 4 cases. The interval from injury to admission was 1-5 hours (mean, 3.1 hours). The fracture situation included 6 cases of sacral fracture, 1 case of right sacroiliac joint dislocation, and 3 cases of iliac bone fracture. There were 10 cases of superior and inferior pubic rami fracture, including 3 cases on the left side (2 cases of suprapubic fracture adjacent to symphysis pubis), 2 cases on the right side, and 5 cases on the bilateral. All fractures were classified according to the Tile system, there were 4 cases of type B2, 1 of type B3, 4 of type C1, and 1 of type C2. The radiological outcome was evaluated by Matta scale, and the positions of the iliosacral screw and superior pubic ramus screw were evaluated according to 3D reconstruction of CT postoperatively. The functional outcome was evaluated by Majeed function scale.

Results

The average time of each screw implantation was 30 minutes, and the average blood loss per screw incision was 50 mL. The time of implantation of each sacroiliac screw was 24-96 seconds (mean, 62 seconds), and the time of implantation of each suprapubic screw was 42-80 seconds (mean, 63.2 seconds). The hospitalization duration was 17-90 days (mean, 43.7 days). All incisions healed by first intention. All patients were followed up 12-22 months (mean, 15.6 months). The radiological outcome was excellent in 8 cases and good in 2 cases according to Matta scale; and 3D reconstruction of CT demonstrated that all the 9 iliosacral screws were placed as type Ⅰ, and all the 13 suprapubic ramus screws were placed as grade 0 on the first postoperative day. No complication such as neurovascular injury, screw back out or rupture, or secondary fracture displacement was observed during the follow-up. At 6 months after operation, the X-ray films showed good fracture healing in all the 10 patients. The functional outcome was excellent in 9 cases and good in 1 case according to Majeed scale at 1 year after operation. One patient sustained Tile C2 pelvic disruption complicated with L ₅ nerve root injury achieved complete nervous functional recovery at last follow-up.

Conclusion

It has advantages of precise screw insertion and lower risk of neurovascular injury to treat unstable pelvic fractures by cannulated screw internal fixation with the assistance of 3D printing insertion template, which can be a good alternative for the treatment of unstable pelvic fractures.

The Morel-Lavallée lesion in thoracolumbar spine trauma-two index cases

The Morel-Lavallée lesion (MLL) is a closed degloving injury caused by traumatic separation of the subcutaneous tissue from the underlying fascia, without a break in the overlying skin. We present two cases that demonstrate a previously unrecognised association of the MLL with thoracolumbar spine fractures. The lesion is frequently missed, or its significance is overlooked, on initial evaluation. Awareness of this injury should allow tailored strategies to decrease the high risk of wound complications.

Minimal Access Fixation of Longitudinal Sacral Fractures: The Posterior Internal Fixator with a Minimum of Three Years of Follow-Up

OBJECTIVE

It is a novel choice to have reduction and internal fixation for sacral fracture with iliac screws starting around the posterior superior iliac spine and percutaneously interconnected.

METHODS

This prospective work was performed at Ain Shams University Hospitals, Cairo, Egypt, during the period from January 2013 until January 2016. Fifty consecutive cases of longitudinal fractures of the sacrum were treated surgically using ileoileal fixation via minimal-access surgery.

RESULTS

According to Pohlemann clinical score, 42 patients (84%) were rated to have excellent clinical result, 6 patients (12%) had a good clinical result, and 2 patients (4%) had a fair clinical result. Regarding social scoring, 34 patients returned back to their jobs with the same level of effort and recreational activities (68%). Ten patients returned to work but with changes in their capabilities and decreases in recreational activities (20%). Six patients changed their profession to another one that required less effort (12%). Regarding radiologic scores, 15 patients (30%) had maximum radiologic scoring (excellent), 30 patients (60%) had good, and 5 patients (10%) had fair reduction. In total, 33 patients (66%) had an excellent final result (10/10); 9 patients (18%) had a good final result (9/10), and 8 patients (16%) had a fair result (7-8/10).

CONCLUSIONS

Fractures of the sacrum are challenging injuries regarding methods of fixation, choice of surgical approach, and the possibility of postoperative complications. Minimal-access ileoileal fixation provides a safe, rapid, and easy method for the fixation of such fractures. It is suitable for critical patients, as it is fast and performed with minimal blood loss. Also, because it does not require an image intensifier, it can be used in least-equipped situations, such as in war scenarios.

Biomechanical investigation of four different fixation techniques in sacrum Denis type II fracture with low bone mineral density

With increasing life expectancy, fragility fractures of the pelvic ring are seen more frequently. Although their osteosynthesis can be very challenging, specific biomechanical studies for investigation of the fixation stability are still lacking. The aim of this study was to biomechanically evaluate four different fixation methods for sacrum Denis type II fractures in osteoporotic bone. Unstable Denis type II vertical sacrum fractures were created in 16 human pelves. Their osteosynthesis was performed with one sacro-iliac screw, posterior sacral plating, triangular fixation, or spino-pelvic fixation. For that purpose, each pelvis was randomly assigned to two paired groups for treatment with either SI-screw/posterior sacral plating or triangular fixation/spino-pelvic fixation. Each hemi-pelvis was cyclically tested under progressively increasing axial compression. Relative interfragmentary movements were investigated via optical motion tracking analysis. Axial stiffness of triangular fixation was significantly higher versus posterior sacral plating and spino-pelvic fixation (p ≤ 0.022), but not significantly different in comparison to SI-screw fixation (p = 0.337). Cycles to 2, 3, 5, and 8 mm fracture displacement, as well as to 3°, 5°, and 8° gap angle at the fracture site were significantly higher for triangular fixation compared to all other groups (p ≤ 0.041). Main failure mode for all osteosynthesis techniques was screw cutting through the bone, leading loss of fixation stability. From a biomechanical point of view, triangular fixation in sacrum Denis type II fractures demonstrated less interfragmentary movements and should be considered in unstable fragility fractures of the sacrum. © 2017 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 36:1624-1629, 2018.

[Quantification of treatment success for geriatric sacral fractures]

BACKGROUND

Geriatric sacral fractures represent an independent fracture entity of increasing incidence and growing socioeconomic relevance. The goals of treatment are very different to those in younger patients with high-energy pelvic fractures. Hence, new outcome measurement instruments are required in order to assess the success of treatment.

OBJECTIVE

Literature review summarizing existing concepts and providing an overview of outcome measurement instruments for geriatric sacral fractures.

METHODS

Narrative review article based on an analysis of the German and English-speaking literature from the last 10 years.

RESULTS

Geriatric sacral fractures result in impaired mobility, increased physical and social loss of dependency and increased morbidity and mortality rates. There is a lack of standardized specific assessment procedures for functional outcome measurement after geriatric sacral fractures. Until these are developed and validated, a parallel acquisition of mortality, the timed up and go test, the Oswestry disability index (ODI) and a generic healthcare questionnaire score (SF-36, EQ-5D) seem to be most suitable.

CONCLUSION

At present our knowledge about the natural course of geriatric sacral fractures is limited by the lack of well-validated instruments to measure functional and radiographic outcomes. This has to be considered when evaluating the success of new treatment options for these patients. Future studies should validate existing scores for this population and develop new specific outcome instruments.

Vertical shear pelvic injury: evaluation, management, and fixation strategies

Vertical shear pelvic ring fractures are rare and account for less than 1% of all fractures. Unlike severely displaced antero-posterior compression and lateral compression pelvic fractures, patients' mortality is lower. Nevertheless, patients must be managed acutely using well-defined ATLS protocols and institution-specific protocols for haemodynamically unstable pelvic ring fractures. The definitive treatment of vertical shear pelvic fractures is however more controversial with a paucity of literature to recommend the ideal reduction and fixation strategy. While the majority of injuries can be reduced and fixed in a closed manner, orthopaedic traumatologists should be familiar with the contraindications to those techniques as well as options such as tension band plating and lumbo pelvic fixation. Our paper reviews the acute management, associated injuries and definitive reduction and fixation strategies of vertical shear pelvic fractures. In addition, we propose a treatment algorithm for the selection of the most appropriate fixation technique.

Outcomes of lumbopelvic fixation in the treatment of complex sacral fractures using minimally invasive surgical techniques

BACKGROUND CONTEXT

Complex sacral fractures with vertical and anterior pelvic ring instability treated with traditional fixation methods are associated with high rates of failure and poor clinical outcomes. Supplemental lumbopelvic fixation (LPF) has been applied for additional stability to help with fracture union.

PURPOSE

The study aimed to determine whether minimally invasive LPF provides reliable fracture stability and acceptable complication rates in cases of complex sacral fractures.

STUDY DESIGN/SETTING

This is a retrospective cohort study at a single level I trauma center.

PATIENT SAMPLE

The sample includes 24 patients who underwent minimally invasive LPF for complex sacral fracture with or without associated pelvic ring injury.

OUTCOME MEASURES

Reoperation for all causes, loss of fixation, surgical time, transfusion requirements, length of hospital stay, postoperative day at mobilization, and mortality were evaluated.

METHODS

Patient charts from 2008 to 2014 were reviewed. Of the 32 patients who underwent minimally invasive LPF for complex sacral fractures, 24 (12 male, 12 female) met all inclusion and exclusion criteria. Outcome measures were assessed with a retrospective chart review and radiographic review. The authors did not receive external funding for this study.

RESULTS

Acute reoperation was 12%, and elective reoperation was 29%. Two (8%) patients returned to the operating room for infection, one (4.2%) required revision for instrumentation malposition, and seven (29%) underwent elective removal of instrumentation. No patient experienced failure of instrumentation or loss of correction. Average surgical time was 3.6 hours, blood loss was 180 mL, transfusion requirement was 2.1 units of packed red blood cells, and postoperative mobilization was on postoperative day 5. No mortalities occurred as a result of the minimally invasive LPF procedure.

CONCLUSIONS

Compared with historic reports of open LPF, our results demonstrate reliable maintenance of reduction and acceptable complication rates with minimally invasive LPF for complexsacral fractures. The benefits of minimally invasive LPF may be offset with increased elective reoperations for removal of instrumentation.

Pelvic trauma: WSES classification and guidelines

Complex pelvic injuries are among the most dangerous and deadly trauma related lesions. Different classification systems exist, some are based on the mechanism of injury, some on anatomic patterns and some are focusing on the resulting instability requiring operative fixation. The optimal treatment strategy, however, should keep into consideration the hemodynamic status, the anatomic impairment of pelvic ring function and the associated injuries. The management of pelvic trauma patients aims definitively to restore the homeostasis and the normal physiopathology associated to the mechanical stability of the pelvic ring. Thus the management of pelvic trauma must be multidisciplinary and should be ultimately based on the physiology of the patient and the anatomy of the injury. This paper presents the World Society of Emergency Surgery (WSES) classification of pelvic trauma and the management Guidelines.

Internal fixation of S1-S3 iliosacral screws and pubic screw as the best configuration for unstable pelvic fracture with unilateral vertical sacral fracture (AO type C1.3)

BACKGROUND

Although internal fixation is the definitive treatment in unstable pelvic fractures with disruption of the anterior arch and a vertical fracture of the sacrum (AO type C1.3), there have been no agreement of the best technique of internal fixation yet. We aimed to derive comparable objective data on stiffness and load to failure in this type of fracture fixations.

METHODS

Synbone was modified into AO type C1.3 fracture model, while treatments were divided into six internal fixation treatment groups using tension band plate (TBP), symphysis pubis plate (SP) with iliosacral screw at S1 and S2 (IS S1-S2), pubic screw (PS) with iliosacral TBP, PS and IS S1-S2, SP and IS S1-S3, PS and S1-S3 and finally PS and IS S1-S3. Sensor was applied to detect the shifting and rotation of fracture fragments. Mechanical strength test conducted with the application of axial force on the sacrum vertebra (S1).

RESULTS

The highest translational stiffness was observed in the group IS S1-S3 + PS (830.36 N/mm, p = 0.031) and there was no difference on the rigidity of the rotation between the groups posterior fixation using IS S1-S2 and IS S1-S3 ( p = 0.51). Meanwhile the highest load to failure was found in group IS S1-S3 + PS (1522.20 N). PS provided advantages compared to the use of plate.

CONCLUSIONS

Group of PS and S1-S3 IS is the configuration of internal fixation with best translational and rotational stiffness and the largest load to failure compared to other techniques in AO type C1.3 fracture.