Outcome of low profile mesh plate in management of comminuted displaced fracture patella

A Retrospective Review of Revision and Re-revision Patella Osteosynthesis Performed for Failure of Fixation of Initial Comminuted Fracture Patterns: Very High Complication Rates

Literature on revision osteosynthesis for failed patella fracture fixation is extremely limited. This study reviews the treatment options and outcomes for revision and re-revision osteosynthesis at a Level 1 trauma center. All patella revision osteosynthesis cases between January 2021 and March 2024 were identified using Current Procedural Terminology codes at a single tertiary care academic center. Medical records, operative reports, and radiographs were reviewed to collect details regarding patient demographics, initial injury and fracture management, indications for revision surgery, revision construct, postoperative weight bearing and range-of-motion restrictions, and outcomes. The primary outcome was major failure defined as loss of fixation or further surgery for nonunion or infection. Ten patients underwent revision osteosynthesis for failed fixation. All fractures were initially comminuted fracture patterns (AO/OTA 34-C3), with nine (90%) initially treated with a 2.7-mm patella-specific variable angle locking plate (Synthes, Paoli, PA). Half (n = 5) of the patients were revised with the same patella-specific plate and half with an all suture transosseous fibertape tension band (Arthrex, Naples, FL). Additional fixation in the form of bony augmentation was performed in 20% (n = 2) of cases and soft tissue augmentation in 70% (n = 7). There was a 70% (n = 7) major failure rate, mostly due to loss of inferior pole fixation. There were four re-revision procedures performed with surgical fixation. Two of these subsequently developed infection, one united and the other had no radiographic signs of union and was lost to follow-up, but was without complication. Regardless of the chosen fixation construct, revision osteosynthesis for failed fixation of initial comminuted fracture patterns has an extremely high rate of failure. Complications increase with further revision surgery. Level of evidence: therapeutic level 3.

Transverse patella fracture fixation: A cadaveric biomechanical comparison of cannulated screws and anterior tension band versus low-profile, multiplanar mesh plating

INTRODUCTION

Multiplanar mesh plating of patella fractures has become more popular in recent years. It was the goal of this study to compare the biomechanical stability of cannulated screw with anterior tension band to multiplanar mesh plating for fixation of transverse patella fractures in cadaver specimens.

MATERIALS AND METHODS

Eight matched pairs of fresh frozen cadaveric knees were obtained and soft tissues dissected leaving the extensor mechanism, joint capsule, and retinaculum intact. Transverse fractures were created at the mid-portion of the patella. For each pair, one specimen was repaired using cannulated screws with anterior tension band, and the second was repaired using multiplanar mesh plating. Each specimen underwent cyclic extension loading with loads increasing by 1.1 kg after every 50 cycles. Interfragmentary displacement was measured at the end of each interval at both 5° and 45° of knee flexion angle, with fixation failure defined by >2 mm displacement.

RESULTS

The specimens fixed with multiplanar mesh plating survived more cycles and higher loads than the specimens fixed with cannulated screws with anterior tension band (p = 0.011 comparing survival plots). After 150 cycles of extension loading, 3 of 8 of the specimens fixed with screws/tension band had failed, whereas none of the mesh plated specimens had failed. After 400 cycles, 7 of 8 of the screws/tension band had failed, whereas half of the mesh plated specimens had failed.

CONCLUSIONS

While a more technically challenging and expensive technique, mesh plating for patella fractures appears to offer greater durability than traditional cannulated screw with tension banding.

Morphological characteristics and a new classification system of the inferior pole fracture of the patella: A computer-tomography-based study

PURPOSE

The objective of this study was to measure the morphological characteristics of inferior pole fracture of the patella (IPFP) and develop a practical classification system to determine the corresponding treatment protocols for different IPFPs with specific patterns.

METHODS

A retrospective radiographic review was performed on a series of 71 patients with IPFP. The preoperative CT data were collected and measured using image processing software. The number of fragments, maximum fracture fragment anteroposterior length (MFFAL), maximum fracture fragment transverse length (MFFTL), fracture fragment coronal angle (FFCA), fracture fragment sagittal angle (FFSA), maximum fracture fragment height (MFFH) and maximum transverse sectional area (MTSA) were analysed.

RESULTS

The mean number of fracture fragments was 3.8. The average MFFAL was 14.9 mm, the average MFFTL was 23.5 mm, the average FFCA was 92.1°, the average FFSA was 93.0°, the average MFFH was 13.6 mm, and the average MTSA was 299.3 mm2. A new classification system was introduced to describe the varied patterns of IPFP, summarized as (I) simple IPFP; (II) comminuted IPFP; (III) simple IPFP with simple patellar body fracture; and (IV) comminuted patellar fracture involving the inferior pole. With the four-type classification system, 12 type I, 22 type II, 21 type III, and 16 type IV lesions were observed, each with specific morphological characteristics.

CONCLUSION

Most IPFPs exhibited a diversiform pattern, demonstrating that coverage fixation was likely needed. The four-type classification system might offer a valuable approach to help orthopaedic surgeons make individual treatment plans.

Patella Fracture Fixation With Novel Wagon Wheel Construct Versus Tension-Band Construct: A Technical Trick

SUMMARY

Internal fixation of patella fractures remains technically challenging. Cannulated screws with an anterior tension band have been associated with high rates of implant prominence, and fracture comminution can make appropriate application of a tension band impractical. We present the results of a novel technique using a transtendinous/transligamentous mini-fragment plate positioned peripherally around the patella with radially directed screws: termed the wagon-wheel (WW) construct. Compared with a cohort of fractures treated with cannulated screws with an anterior tension band, there was no difference in final range of motion and rate of nonunion. The WW construct had a significantly decreased incidence of symptomatic implants (5% vs. 32%, P = 0.02), rate of reoperation (9% vs. 38%, P = 0.018), dependency on gait aids (10% vs. 38%, P = 0.031), and a faster time to union (HR: 2.2; 95% CI, 1.28-3.95, P = 0.005). In summary, the WW was designed with the goal of obtaining peripheral plate fixation to maximize fragment-specific fixation while minimizing implant prominence. Patients treated with the WW demonstrated reduced rates of implant prominence and reoperation.

Management of comminuted patellar fractures using suture reduction technique combined with the modified Kirschner-wire tension band

OBJECTIVES

Surgical management of comminuted patella fractures remains a major challenge for the surgeon. We developed a suture reduction (SR) technique to better preserve the comminuted patella. The study aimed to compare the suture reduction technique with conventional reduction (CR) technique in the management of comminuted patellar fractures using the modified Kirschner-wire (K-wire) tension band.

METHODS

From May 2016 to September 2020, a total of 75 patients with comminuted patellar fracture were reviewed retrospectively. Among these cases, 35 patients were in the suture reduction group with a mean age of 52 years, while 40 patients were in the conventional reduction group with a mean age of 53 years. All cases were closed fractures. Comminuted patellar fractures were classified as type 34-C3 according to the AO/OTA classification. Radiographs of the knee were obtained at routine follow-up to evaluate the reduction quality and fracture union. Clinical outcomes including range of motion (ROM), visual analog scale (VAS), Lysholm, and Böstman grading scales were measured at the last follow-up. Postoperative complications were also recorded.

RESULTS

The average time from injury to surgery was 5.4 days in suture reduction group and 3.7 days in conventional reduction group (p < 0.05). The surgical time of suture reduction group was less than that of conventional reduction group, but there was no significant difference (p = 0.110) regarding surgical time between the two groups. The average blood loss in suture reduction group was 42.9 ml, while the average blood loss in conventional reduction group was 69.3 ml (p < 0.001). There was no difference regarding fracture union, ROM and knee function score (Lysholm score and Böstman scale) between the two groups. The complication rates were 17.1% in suture reduction group and 12.5% in conventional reduction group respectively (p > 0.05).

CONCLUSIONS

In the treatment of comminuted patellar fractures with modified K-wire tension band, the use of suture reduction technique can shorten the surgical time, reduce the surgical trauma, and obtain satisfactory results. This new surgical technique may be particularly effective in management of comminuted patellar fractures when patellectomy would otherwise be considered.

3D reduction combined with the modified Kirschner-wire tension band for the treatment of comminuted patella fracture

PURPOSE

A novel 3D reduction method combined with a modified Kirschner-wire tension band (3D MKTB) fixation method to treat comminuted patella fractures was introduced in this study. This study aims to evaluate the effectiveness and practicality of this novel technology.

METHODS

This study is a retrospective case series study. Twenty-eight patients with closed comminuted patella fractures were treated with the novel 3D MKTB fixation method. Radiographs of the knee were obtained at the routine follow-up to assess fracture healing and widening of the articular step-off. Clinical outcomes including the degree of pain on a visual analogue scale (VAS), range of motion, Lysholm, and Bostman grading scales were measured at the last follow-up. The mean follow-up was 39.8 ± 10.5 (range 26-62) months.

RESULTS

All patients had bony union at a mean of 11.4 ± 1.4 (range 9-14 weeks) weeks based on X-ray. No patient had evidence of internal fixation failure. Only two patients suffered from surgical complication. One patient suffered from postoperative superficial infection, and one patient suffered from internal fixation irritation. Articular step-off larger than 2 mm was not seen in any cases. The average VAS-related pain score was 0.5 ± 0.5 (range 0-1) points. The average range of motion was 0-138.6° ± 11.9° (range 90°-155°), all patients had full knee extension. The mean Lysholm and Bostman scores were 92.9 ± 3.5 (range 86-100 points) points and 28.5 ± 1.3 (range 24-30 points) points, respectively.

CONCLUSION

The novel 3D reduction technique combined with the modified Kirschner-wire tension band technique is an effective, safe, and simple treatment option for comminuted patella fractures.

LEVEL OF EVIDENCE

IV.

A double-suture cerclage reduction technique with Nice knots for comminuted patella fractures (AO/OTA 34-C3)

BACKGROUND

Comminuted patella fractures place high demands on surgeons' surgical skills. We used a double-suture cerclage reduction with Nice knots as an intra-operative reduction technique to displaced comminuted patella fractures.

METHODS

Patients were divided into two groups by whether or not an intra-operative suture cerclage reduction technique was used. Fragments count, surgical time, quality of the reduction, and fracture healing time were recorded. The postoperative function was assessed by Böstman score and range of motion.

RESULTS

With the inclusion and exclusion criteria, 48 patients we included in the cohort between Sept. 2016 and Oct. 2021. The double-suture cerclage reduction technique with a Nice knot achieved a satisfactory reduction. When the number of fragments was over 5, this technique showed significant advantages in saving surgery time.

CONCLUSIONS

In this study, the double-suture cerclage reduction technique combined with the Nice knot shows significant advantages for displaced highly comminuted patella fractures. This technique simplifies the operation and saves surgical time, which is helpful for clinical practice.

Adjunct neutralization plating in patella fracture fixation: a technical trick

Patella fracture outcomes are positive overall; however, in some cases, traditional fixation methods result in complications, including loss of fixation and irritable hardware requiring removal. We present a technique of plate fixation that we believe has the potential to improve stability and is less offensive in more comminuted fracture patterns. Improved stability should allow unfettered advancement of rehabilitation without concern for loss of fixation. Lower profile fixation offers a potential for diminishing the presence of irritating hardware requiring removal. We present our technique for using plate fixation to augment more complex patella fracture patterns.

Treating Inferior Pole Fracture of Patella with Hand Plating System: First Clinical Results

OBJECTIVE

Inferior pole fractures of patella are notorious fractures where it is difficult to obtain rigid internal fixation by conventional methods. The objective of the study was to introduce the Hand Plating System (HPS), which was a novel surgical technique for inferior pole fractures of patella, and to report the radiological and clinical outcomes following the application of the surgical technique.

METHODS

The study was designed as a retrospective cohort study. Between July 2017 and December 2018, 30 patients who were diagnosed with inferior pole fracture of the patella without additional orthopaedic injuries were enrolled in this case series. After X-ray and 3D-CT examinations, all patients underwent open reduction and internal fixation by HPS with or without supplementary cannulated screw and lag screw stabilization. The bony union time, final range of motion (ROM), Bostman score, visual analog scale (VAS), and complications were measured as the clinical outcomes under a minimum of 12 months of follow-up.

RESULTS

All of the operations went well with the mean operative time of 76.2 ± 15.3 min. Bony union achieved in all the cases at an average of 9.5 ± 1.4 weeks after surgery. There was no loss of reduction, fixative failure, or surgical implant removal during follow-up. The average range of motion 1 year postoperatively was 0°-123.3°. The mean Bostman Score at the last follow-up was 26.8 ± 2.1 with the satisfactory rate of 100%. The pain feeling during walking as measured by VAS averaged at 0.9 ± 1.3. No complications developed except for one case of poor incision healing, which healed eventually after surgical debridement.

CONCLUSIONS

HPS was demonstrated as a secure fixation and as a kind of tension band for inferior pole fractures of the patella. Satisfactory recovery of knee function and low complication rate, including no need for hardware removal, could be expected.

Management of Patella Fracture Nonunion and Large Bone Defect After Bone-Patellar Tendon-Bone Autograft: A Case Report

CASE

A 32-year-old patient was diagnosed with a vertical patella fracture nonunion after a bone-patellar tendon-bone (BTB) anterior cruciate ligament reconstruction. In addition, a 1 × 2 × 1 cm patellar bone defect was noticed at the graft harvesting site. The patient was treated surgically with open reduction and internal fixation and iliac crest bone autograft which resulted in fracture union.

CONCLUSION

Many intraoperative and postoperative risk factors for iatrogenic patella fracture when harvesting BTB autograft were identified. Surgeons should be aware of technical skills needed to prevent this complication and should treat the fracture appropriately to avoid nonunion and optimize the outcome.

Outcomes for a custom-made anchor-like plate combined with cerclage in the treatment of inferior pole patellar fracture

Objective

An inferior pole fracture of the patella requires surgical treatment to restore the knee extension mechanism of the knee joint. Different from other types of patellar fractures, inferior pole fractures are usually comminuted, and other traditional fixation methods, such as tension band wiring, may not meet the fixation needs. We propose fixing inferior pole fractures of the patella with a custom-made anchor-like plate combined with cerclage and report the surgical outcomes.

Material and methods

This is a retrospective clinical study. From June 2018 to August 2020, 21 patients with inferior patella fracture treated at Hong Hui Hospital Affiliated to Xi’an Jiaotong University received a custom-made anchor-like plate combined with cerclage. Complications of the surgical fixation methods and final knee function were used as the main outcome measures.

Results

All fractures achieved good union, and the union time ranged from 8 to 12 weeks. No patients had serious complications, such as internal fixation failure or infection. The average duration of surgery of patients was 75.05 7.26 min, and the intraoperative blood loss was 60.099.49 ml. At the last follow-up, the range of motion of the knee was 120°-140°, with an average of 131.436.92°, the Bostman score was 27–30, and the Lysholm score ranged from 82 to 95. All patients showed good knee function one year after the operation.

Conclusion

We used a modified T-shaped plate combined with cerclage technology to fix inferior fractures pole of the patella, providing reliable fixation, allowing early functional exercise of the knee joint, and providing patients with good knee joint function after surgery.

Three-dimensional fracture mapping of multi-fragmentary patella fractures (AO/OTA 34C3)

Background

Multi-fragmentary patella fractures (MFPFs) are common patella fracture type. Low-profile plate fixation seems to be promising advancement in the treatment of such difficult fractures. There is no systematic morphologic study specifically for MFPFs to provide objective reference for the improvement of future implants and biomechanical models. This study aimed to delineate and quantify the location and spatial frequency of fracture lines, comminution zones, and coronal plane fragments in MFPFs using three-dimensional (3D) CT mapping technique.

Methods

A total of 187 MFPFs were retrospectively reviewed and analyzed. Fractures were digitally reconstructed from CT data, and fracture lines, comminution zones, and coronal fragments were graphically overlaid onto a 3D patella template. Fracture characteristics were summarized qualitatively based on the fracture maps and quantitatively on the counts and volume of each fragment. Furthermore, according to the classic fracture patterns concerning MFPFs, subgroup analysis was conducted.

Results

On average, we observed 7 fragments in each fracture, 3 of which were <1 cm³. Most fractures (81.2%) had coronal fragments on the anterior and/or posterior patella surfaces. We identified three classic patella fracture patterns: transverse with comminution, stellate, and “displaced comminuted” in 104, 54, and 29 knees, respectively. 3D maps demonstrated distinct distribution fracture patterns of fracture lines, comminution zones, and coronal fragments.

Conclusions

Supero-medial corner of the patella was seldomly involved, and might be used as the cornerstone for fixation. Coronal fragments were common on both anterior and posterior patella surfaces, justifying the application of anterior plate osteosynthesis characterized by multi-planar fixation. Comminution areas mainly concentrated in the lower half of the patella, potentially suitable for an implant in combination with sutures or circumferential cerclage wiring. The described 3D features of MFPFs could provide reference for the design of future implants and biomechanical models.

Plate osteosynthesis in patellar fractures: a systematic review and meta-analysis

INTRODUCTION

To perform a systematic review and assess the indications, outcomes, complications, and union rates associated with plate osteosynthesis in patellar fractures compared to tension band wiring.

METHODS

The systematic search was conducted for articles in PubMed, Embase Biomedical, Cochrane central, and LILACS databases (date of inception to July 30, 2020). Articles were included if they were randomized control trials, cohort studies, case-control studies, and case series (with more than five cases), which focused on the clinical outcomes of patients with plate osteosynthesis as a treatment for fracture of the patella and had a minimum follow-up of 3 months. All studies were assessed according to their level of evidence, the number of patients, age of patients, fracture patterns described, complications of treatment, and results summarized. Meta-analysis could only be done for two parameters (complications and reoperations) due to the paucity of data and heterogeneity of studies' limited statistical analysis. The data are presented as a review table with the key points summarized.

RESULTS

Twenty studies (seven prospective and 13 retrospective articles) identified 533 patients with 534 fractures who had undergone plate osteosynthesis for fracture of the patella. The most common fracture treated with plate osteosynthesis was 34C.

CONCLUSION

Basket plate was most commonly used for inferior pole fractures, while mesh plates were for intra-articular patella fractures. Overall plating was associated with better clinical outcomes, fewer complication rates, and high union rates compared to tension band wiring for patella fractures.

Comparison of total patellectomy and osteosynthesis with tension band wiring in patients with highly comminuted patella fractures: a 10-20-year follow-up study

BACKGROUND

The purpose of this study was to evaluate and compare the long-term clinical outcomes between the total patellectomy and osteosynthesis with tension band wiring in patients with highly comminuted patella fractures.

METHODS

Between January 1987 and December 2003, this retrospective study included a total of 35 patients (mean age, 51.4±16.8 years) with a minimum of 10 years follow-up period, comprising 29 males and 6 females, who were divided into the total patellectomy group (17 patients) or the open reduction and internal fixation (ORIF) group (18 patients) in the Third Affiliated Hospital of Hebei Medical University. We retrospectively collected patient demographics and data on the type of trauma, fracture type, and postoperative complications. Clinical outcomes including knee range of motion (ROM), 36-Item Short-Form Health Survey (SF-36) score [including physical component score (PCS) and mental component score (MCS)], Knee Injury and Osteoarthritis Outcome Score (KOOS), and Kujala score were evaluated and compared between the two groups. Biodex System dynamometer was used to quantitatively evaluate quadriceps femoris muscle power following measurement of peak torque.

RESULTS

The mean follow-up periods of the total patellectomy group and the ORIF group were 17.2±5.6 and 16.8±4.9 years, respectively. There were no significant differences between the two groups of patient demographics in terms of the number of patients, age, sex, injury side, time to surgery, type of trauma, and fracture classification (p>0.05). Total patellectomy was comparable to osteosynthesis with tension band wiring in terms of ROM [injured knee: 120.4±3.1° vs 118.6±3.3°; uninjured knee: 126.5±2.8° vs 127.3±1.7°; both p>0.05], peak torque [Injured knee: 96.2±2.3 vs 97.3±2.6, N· m; Uninjured knee: 107.6±2.1 vs 106.3±1.8, N· m; both p>0.05], SF-36 score [PCS: 64.1±18.0 vs 61.5±17.9; MCS: 55.1±13.8 vs 54.3±12.4; both p>0.05], KOOS score [76.3±12.1 vs 73.4±11.7; p>0.05], and Kujala score [67.6±11.8 vs 70.8±11.9; p>0.05] at the final follow-up, while total patellectomy had significantly shorter operation time than ORIF group (47.5±12.1 vs 68.8±22.3, min, p<0.05). In the total patellectomy group, complications occurred in 6 of 17 cases (35.3%), and all occurred with calcification. In the ORIF group, complications occurred in 12 of 18 cases (66.7%), including 2 cases of infection (11.1%), 1 case of non-union (5.6%), 2 cases of implant failure (11.1%), 2 cases of soft tissue irritation (11.1%), and 5 cases of patellofemoral arthritis (27.8%).

CONCLUSIONS

Total patellectomy technique was a safe and reliable alternative treatment for treating patients with highly comminuted patella fractures when anatomically reduction and rigid fixation were difficult, although it caused relatively higher rates of calcification.

Comparison between tension band and cerclage with X-Plate and lag screws in treatment of comminuted patellar fractures

BACKGROUND

Comminuted patellar fractures are not rare, and the ideal treatment method remains controversial. The present study was conducted to evaluate effects and compare complications of two different methods used to treat comminuted patellar fractures.

METHODS

From March 2010 to August 2016, 102 cases of 34-C2 or 34-C3 comminuted patellar fractures were treated at our hospital, wherein patients received two different treatments: titanium cable tension band with cerclage method (group A) and intrafragmentary screws with X-shaped plating technique (group B). At follow-ups, articular step-off, range of motion (ROM), Lysholm scores, time of union, and complications were recorded and analyzed. Radiographic and clinical data as well as rate of complications were statistically analyzed.

RESULTS

In total, 87 patients were included in the final analysis (n = 47 in group A and n = 40 in group B). No significant differences were noted in terms of cost of implant, age, gender, rate of 34-C3 fractures, rate of layered inferior pole fractures, postoperative articular step-off and union time. At 2-year follow-up, average Lysholm scores, ROM and rate of complications were (89.0 ± 4.5), (122°±12°) and (27.7%) in group A and (90.2 ± 3.9), (124°±11°) and (17.5%) in group B, respectively, with no significant differences (p > 0.05). The mean time of surgery in group B was shorter than that in group A with significant difference (p < 0.05).

CONCLUSIONS

Treatment using the intrafragmentary screws and plate method for amenable comminuted patellar fractures achieved similar complication rate and favorable functional outcomes at the 2-year follow-up, which was comparable to the titanium cable tension band with cerclage method. Thus, the intrafragmentary screws and plate method is effective, safe and convenient for 34-C2/C3 comminuted patellar fractures, especially appropriate for patients with layered fragments.

Patellar Fracture After ACL Reconstruction: Open Reduction and Internal Fixation with a Maxillofacial Plate: A Case Report

CASE

Patellar fractures after anterior cruciate ligament (ACL) reconstruction with a bone-patellar-tendon-bone (BPTB) autograft are a rare complication with a reported incidence of 0.2% to 2.3%. Treatment has previously been nonoperative splinting, lag screws, or a tension-band construct. We present the case of a 14-year-old adolescent girl who suffered a comminuted patella fracture 4 weeks after an ACL reconstruction using a BPTB autograft who subsequently underwent successful operative fixation through a novel technique with the use of a maxillofacial plate and screw system.

CONCLUSION

A maxillofacial plate and screw system is an effective and reliable treatment option for patellar fractures sustained after ACL reconstruction with a BPTB autograft.

Patella Fractures: Approach to Treatment

Patellar fracture morphology varies based on the mechanism of injury. Most fractures are either a result of direct impact or through an indirect eccentric extensor contraction injury. Each fracture pattern requires appropriate preoperative planning and individualization of the fixation method. Displaced fractures affect the extension apparatus, and often require surgical fixation. Surgical treatment is recommended in fractures with any of the following features: articular step-off > 2 mm, > 3 mm of fracture displacement, open fractures, and displaced fractures affecting the extensor mechanism. Meticulous handling of the soft-tissue envelope is of the utmost importance, given the patella's tenuous blood supply and limited soft-tissue envelope. Incongruent articular surface can result in detrimental long-term effects; therefore, surgical treatment is directed toward anatomic reduction and fixation. The evolution of patellar fracture fixation continues to maximize options to balance rigid fixation with low-profile fixation constructs. Improving functional outcomes, minimizing soft-tissue irritation, and limiting postoperative complications are possible by using the therapeutic principles of rigid anatomical fixation and meticulous soft-tissue handling.

Miniplate osteosynthesis in fracture surgeries: Case series with review of concepts

PURPOSE

Miniplates were initially developed as targets for foot and hand fractures, but they have been used in the treatment of fixation of small bone fragments, reduction of long bone fractures and non-union treatment, which have been difficult to treat. In this study, the authors used miniplates to treat fractures of the upper extremities, lower extremities, and pelvis obtained good outcomes. Herein, the authors report these good outcomes and review the current concept of miniplates.

PATIENTS AND METHODS

Forty-two patients treated with miniplates between March 2012 and March 2017 who attended follow-up for > 1 year were included in this retrospective study. Miniplates were selected according to purpose, which was classified into three categories: fixation, reduction, and stability enhancement. For fixation, miniplates were used to fix distal fibular fractures occurring distal to the syndesmosis and treat patellar and olecranon fractures with severe comminution. For reduction, miniplates were used to reduce the tibia during intramedullary nailing in tibiofibular shaft fractures, while reduction was performed in advance of definitive plating fixation in patients with humeral and pelvic fractures. To enhance stability, the miniplate was inserted after autobone graft for atrophic nonunion at the humeral shaft following nail insertion. The validity of a miniplate was analyzed by reviewing the published literature on the use of miniplates in orthopedic fracture surgeries.

RESULTS

Bony union was achieved in all cases. No specific postoperative complications were observed; however, mild pain and limited range of motion observed in two patients were resolved after implant removal. Sixteen studies on fracture treatment using miniplates reported clinically fair outcomes.

CONCLUSION

Miniplates are not just small metal plates. Depending on the location and treatment of the fracture, the miniplate can effectively fix small bone fragments, help the main plate to maintain the reduction of large bone fragments, and increase the fixation force for nonunion treatment.

The application of the Nice knots as an auxiliary reduction technique in displaced comminuted patellar fractures

PURPOSE

To evaluate intraoperative and early postoperative clinical outcomes using the Nice knot as an auxiliary reduction technique in displaced comminuted patellar fractures.

METHODS

Thirty-nine patients with unilateral closed displaced comminuted patellar fractures received open reduction and internal fixation (ORIF), utilizing either Nice knot (the NK group, 24 patients) or traditional reduction (the TR group, 23 patients) techniques, were retrospectively reviewed in this study. Intra-operative surgical time and peri-operative hemoglobin were recorded. Post-operative clinical outcomes were measured using visual analgesic score, range of motion of the knee joint and the Böstman scales, and radiographic outcomes were used to evaluate fracture healing. Complications including infection, bone non-union, implant loosening, fragment displacement and painful hardware were also assessed.

RESULTS

In-hospital records indicated significantly shorter surgical duration (32.6 min) in the NK group than in the TR group (63.9 min). Intraoperative blood loss was also significantly decreased in the NK group (64.7 ml) compared to the TR group (189.1 ml). Patients in the NK and TR groups were followed for mean of 12.9 months and 12.5 months respectively. The union rate was 100% (24/24) in the NK group and 91.3% (21/23) in the TR group. In the TR group, there were two non-unions, including one infected non-union. There was no difference in the visual analgesic score, the range of motion of the knee joint or the Böstman scale at last follow-up between the two groups.

CONCLUSION

The sliding, self-stabilizing Nice knot was associated with reduced surgical time, decreased intraoperative blood loss, and satisfactory postoperative outcomes in the treatment of displaced patellar fractures. Future studies are needed to ensure the generalizability of these findings to additional patient populations at other institutions.

Hook plating in patella fractures

PURPOSE

Tension band wiring is considered the standard treatment for patella fractures. However, it is limited for fractures with marginal involvement, comminution, and osteoporotic bone. Our experience indicates that these limitations can be overcome with the hook plate. We evaluated the radiographic and clinical outcomes in patients with patella fracture treated with hook plating.

METHODS

We enrolled 30 patients who underwent hook plating for patella fracture at two institutions between 2013 and 2017. Fracture classification and surgical options were reviewed. Postoperative fracture gap and time to union as radiographic measurements, and complications, range of motion, and functional outcome with the Lysholm score as clinical outcomes, were evaluated retrospectively.

RESULTS

Nine fractures were AO/OTA 34A1, three B1, one B2, two C1, nine C2, and six C3. All were closed fractures. There were 3 cases of revision, 4 with lateral or medial marginal fracture, 9 with isolated inferior pole fracture, and 14 with comminuted fracture. The average postoperative fracture gap was 0.4 (range, 0-2.0) mm, and bone union was achieved without additional intervention. The average time to union was 11.6 (range, 7-24) weeks. There were no complications, and no extension lag except in one case (10°). The average flexion was 138.5° (range, 110-145°). For functional outcomes, the average Lysholm score was 89.5 (range, 74-95), with 13 excellent, 14 good, 3 fair, and no poor cases.

CONCLUSION

This study suggests that hook plating can result in good bone union and restored knee function in marginal or comminuted fractures of the patella.

A novel three-dimensional strapping reduction for the treatment of patellar fractures

Objective

This study aimed to investigate the effectiveness of a three-dimensional strapping reduction in the treatment of patellar fractures.

Methods

Between January 2015 and June 2017, a total of 56 patients were randomly allocated to the three-dimensional strapping reduction group (trial group) and towel clamp reduction group (control group). There were no significant differences in age, gender, injury side, the interval time from injury to surgery, fracture pattern, and cause of injury (P > 0.05). The operation time, fluoroscopy time, bone union time, postoperative Hospital for Special Surgery (HSS) scores, and complications were recorded and analyzed.

Results

All incisions achieved primary union. All patients in both groups completed a follow-up with an average of 12.5 months (range 11–15 months). Both operation time and fluoroscopy time in the trial group were significantly shorter than those in the control group (P < 0.001). All patellar fractures achieved bone union, and there was no significant difference in bone union time between the two groups (P > 0.05). Bone nonunion, infection, and fixation failure were not found in both groups. HSS scores of the trial group (90.9 ± 4.2) were higher than those of the control group (86.6 ± 5.2) (P < 0.01).

Conclusion

Compared with towel clamp reduction, the three-dimensional strapping reduction in the treatment of patellar fractures has advantages of shorter operation time and fluoroscopy time, better knee function after surgery, and satisfactory fracture healing.

Treatment of Patella Fractures

Patella fractures comprise 1% of all fractures. Treatment options vary based on fracture displacement, classification, and patient factors. Traditionally, nonoperative treatment has been reserved for nondisplaced fractures. Many operative treatments are available with differing indications and levels of success. Tension band constructs have been the most commonly employed approach to fixation, with cerclage wiring for comminuted fractures. Recently, plate fixation of patella fractures has become more popular. Plating constructs offer a low-profile design with stable fixation, allowing for earlier mobilization and potentially improved functional outcomes. Data regarding the long-term outcomes of plating techniques are limited, and further studies are needed. [Orthopedics. 2018; 41(6):e747-e755.].

A novel technique of using a miniature plate in combination with tension band wiring to treat comminuted patellar fractures

Traditionally, tension band fixation has been used for treating simple fracture patterns; however, fixation remains a challenge, especially for comminuted fractures. We describe a new method of operation using a combination of a miniature plate with tension band wiring to treat comminuted patellar fractures. The aim of this technique is to transform complicate fractures into simple transverse fractures. As far as we know, no studies using a similar method have been found.The purpose of this study was to assess the effectiveness of a novel technique in which a miniature plate is used in combination with tension band wiring to treat comminuted patellar fractures.Between March 2013 and May 2015, 16 patients with closed, displaced, comminuted fractures of the patella were included in the present study. All subjects underwent fixation using a combination of a miniature plate with a tension band wire. Knee function and patient status were evaluated at 12 months using the Böstman knee score and Lysholm knee scale.The average follow-up period was 15.6 months (range, 12-20 months). At the 12-month follow-up, bone healing was satisfactory in all patients. The average postoperative Lysholm score was 91.6 ± 1.4 (range, 84-97). The average postoperative Böstman scale score was 26.4 ± 0.5 (range, 22-30), thereby indicating excellent results in 4 patients and good results in 12. No patients required reoperation.The results demonstrate that this new technique is an effective and safe treatment option for comminuted patella fractures, as it is associated with good clinical outcomes.