[Effectiveness of vertical compression of locking plate combined with hollow screws in treatment of Sanders type and calcaneal fractures]

Objective

To probe into the effectiveness of vertical compression of locking plate combined with hollow screws in the treatment of Sanders type Ⅱ and Ⅲ calcaneal fractures.

Methods

The clinical data of 128 patients with Sanders type Ⅱ and Ⅲ calcaneal fractures who were admitted between March 2019 and April 2022 and met the selection criteria were retrospectively analyzed. Among them, 65 patients were treated with locking plate combined with hollow screw vertical compression (study group), and 63 patients were treated with simple locking plate (control group). There was no significant difference in baseline data between the two groups ( P>0.05), such as gender, age, fracture side and Sanders classification, cause of injury, time from injury to operation. The operation time, intraoperative blood loss, hospital stay, and fracture healing time were recorded and compared between the two groups. Before operation and at 12 months after operation, the American Orthopaedic Foot and Ankle Association (AOFAS) score (including total score, pain score, functional score, and alignment score) was used to evaluate the recovery of foot function, and imaging indicators such as calcaneal width, calcaneal height, calcaneal length, Böhler angle, and Gissane angle were measured on X-ray films.

Results

All patients were followed up 12 months after operation. There was no significant difference in operation time, intraoperative blood loss, hospital stay, and fracture healing time between the two groups ( P>0.05). Poor wound healing occurred in 1 case in the study group and 2 cases in the control group. At 12 months after operation, there was no significant difference between the two groups in the pre- and post-operative difference of calcaneal length, calcaneal height, Gissane angle, and Böhler angle ( P>0.05). However, the pre- and post-operative difference in calcaneal width in the study group was significantly higher than that in the control group ( P<0.05). The pre- and post-operative difference of AOFAS total score in the study group was significantly higher than that in the control group ( P<0.05), and further analysis showed that the pre- and post-operative difference of pain and function scores in the study group were significantly higher than those in the control group ( P<0.05), while there was no significant difference in the pre- and post-operative difference of force score between the two groups ( P>0.05).

Conclusion

Compared with simple locking plate treatment, the treatment of Sanders type Ⅱ and Ⅲ calcaneal fractures with vertical compression of locking plate combined with hollow screws can more effectively improve the width of the subtalar calcaneal articular surface, avoid peroneal longus and brevis impingement, reduce pain, and increase the range of motion of the subtalar joint, and the effectiveness is better.

Isometry of anteromedial reconstructions mimicking the deep medial collateral ligament depends on the femoral insertion

PURPOSE

This study aimed to investigate the length change patterns of the native deep medial collateral ligament (dMCL) and potential anteromedial reconstructions (AMs) that might be added to a reconstruction of the superficial MCL (sMCL) to better understand the control of anteromedial rotatory instability (AMRI).

METHODS

Insertion points of the dMCL and potential AM reconstructions were marked with pins (tibial) and eyelets (femoral) in 11 cadaveric knee specimens. Length changes between the pins and eyelets were then tested using threads in a validated kinematics rig with muscle loading of the quadriceps and iliotibial tract. Between 0° and 100° knee flexion, length change pattern of the anterior, middle and posterior part of the dMCL and simulated AM reconstructions were analysed using a rotary encoder. Isometry was tested using the total strain range (TSR).

RESULTS

The tibiofemoral distance of the anterior dMCL part lengthened with flexion (+12.7% at 100°), whereas the posterior part slackened with flexion (-12.9% at 100°). The middle part behaved almost isometrically (maximum length: +2.8% at 100°). Depending on the femoral position within the sMCL footprint, AM reconstructions resulted in an increase in length as the knee flexed when a more centred position was used, irrespective of the tibial attachment position. Femoral positioning in the posterior aspect of the sMCL footprint exhibited <4% length change and was slightly less tight in flexion (min TSR = 3.6 ± 1.5%), irrespective of the tibial attachment position.

CONCLUSION

The length change behaviour of potential AM reconstructions in a functionally intact knee is mainly influenced by the position of the femoral attachment, with different tibial attachments having a minimal effect on length change. Surgeons performing AM reconstructions to control AMRI would be advised to choose a femoral graft position in the posterior part of the native sMCL attachment to optimise graft length change behaviour. Given the high frequency of MCL injuries, sufficient restoration of AMRI is essential in isolated and combined ligamentous knee injuries.

LEVEL OF EVIDENCE

There is no level of evidence as this study was an experimental laboratory study.

Bone Bruise versus Fracture on MRI and the Relevance to Return to Play

We review the spectrum of acute osseous injuries in athletes, ranging from osseous contusion (bone bruise) injuries to nondisplaced cortical fractures. The basic biomechanical concepts, underlying histopathologic changes, and characteristic magnetic resonance imaging (MRI) features of acute osseous injuries are presented. Bone bruise injuries of varying severity are highlighted to showcase the breadth of imaging findings on MRI and methods for characterizing such lesions. We emphasize the importance of accurately assessing patterns of injury on MRI to communicate more effectively with team medical staff and recognize the implications on return to play. This article offers the foundational tools for approaching bone bruise injuries in elite athletes to add value to the diagnosis and treatment of this unique patient population.

Defining Patient-relevant Thresholds and Change Scores for the HOOS JR and KOOS JR Anchored on the Patient-acceptable Symptom State Question

BACKGROUND

When evaluating the results of clinical research studies, readers need to know that patients perceive effect sizes, not p values. Knowing the minimum clinically important difference (MCID) and the patient-acceptable symptom state (PASS) threshold for patient-reported outcome measures helps us to ascertain whether our interventions result in improvements that are large enough for patients to care about, and whether our treatments alleviate patient symptoms sufficiently. Prior studies have developed the MCID and PASS threshold for the Hip Disability and Osteoarthritis Outcome Score for Joint Replacement (HOOS JR) and Knee Injury and Osteoarthritis Outcome Score for Joint Replacement (KOOS JR) anchored on satisfaction with surgery, but to our knowledge, neither the MCID nor the PASS thresholds for these instruments anchored on a single-item PASS question have been described.

QUESTIONS/PURPOSES

(1) What are the MCID (defined here as the HOOS/KOOS JR change score associated with achieving PASS) and PASS threshold for the HOOS JR and KOOS JR anchored on patient responses to the single-item PASS instrument? (2) How do patient demographic factors such as age, gender, and BMI correlate with MCID and PASS thresholds using the single-item PASS instrument?

METHODS

Between July 2020 and September 2021, a total of 10,970 patients underwent one primary unilateral THA or TKA and completed at least one of the three surveys (preoperative HOOS or KOOS JR, 1-year postoperative HOOS or KOOS JR, and 1-year postoperative single-item anchor) at one large, academic medical center. Of those, only patients with data for all three surveys were eligible, leaving 13% (1465 total; 783 THAs and 682 TKAs) for analysis. Despite this low percentage, the overall sample size was large, and there was little difference between completers and noncompleters in terms of demographics or baseline patient-reported outcome measure scores. Patients undergoing bilateral total joint arthroplasty or revision total joint arthroplasty and those without all three surveys at 1 year of follow-up were excluded. A receiver operating characteristic curve analysis, leveraging a 1-year, single-item PASS (that is, "Do you consider that your current state is satisfactory?" with possible answers of "yes" or "no") as the anchor was then used to establish the MCID and PASS thresholds among the 783 included patients who underwent primary unilateral THA and 682 patients who underwent primary unilateral TKA. We also explored the associations of age at the time of surgery (younger than 65 years or 65 years and older), gender (men or women), BMI (< 30 or ≥ 30 kg/m 2 ), and baseline Patient-Reported Outcome Measure Information System-10 physical and mental component scores (< 50 or ≥ 50) for each of the MCID and PASS thresholds through stratified analyses.

RESULTS

For the HOOS JR, the MCID associated with the PASS was 23 (95% CI 18 to 31), with an area under the receiver operating characteristic curve of 0.75, and the PASS threshold was 81 (95% CI 77 to 85), with an area under the receiver operating characteristic curve of 0.81. For the KOOS JR, the MCID was 16 (95% CI 14 to 18), with an area under the receiver operating characteristic curve of 0.75, and the PASS threshold was 71 (95% CI 66 to 73) with an area under the receiver operating characteristic curve of 0.84. Stratified analyses indicated higher change scores and PASS threshold for younger men undergoing THA and higher PASS thresholds for older women undergoing TKA.

CONCLUSION

Here, we demonstrated the utility of a single patient-centered anchor question, raising the question as to whether simply collecting a postoperative PASS is an easier way to measure success than collecting preoperative and postoperative patient-reported outcome measures and then calculating MCIDs and the substantial clinical benefit.

LEVEL OF EVIDENCE

Level III, therapeutic study.

Prolonged Union in Conservative Treatment of Symphalangeal Toe Fractures: Case Series

Background

Toe symphalangism is characterized by a fusion of the interphalangeal joint between the middle and distal phalanges. While typical lesser toe fractures heal well with conservative treatment, in our clinical experience, we encountered patients with symphalangeal toe fractures who experienced long-lasting pain and delayed radiographic union. Therefore, this study aimed to report radiographic outcomes following conservative treatment of symphalangeal fractures of the lesser toes.

Methods

We retrospectively reviewed 14 patients with symphalangeal lesser toe fractures who were treated conservatively. We investigated the mechanism of injury and measured the time from the initial injury date to the complete radiographic union. The fracture gap distance was measured on an initial lateral radiograph.

Results

Symphalangeal fractures involved the fourth toe in 4 patients (28.5%) and the fifth toe in 10 patients (71.4%). Regarding the mechanism of injury, 6 patients (42.9%) were injured by stubbing or bumping into the door, 5 patients (35.7%) were injured by tripping, 2 patients (14.3%) were injured by heavy objects falling directly on their toes, and 1 patient (2.3%) complained of pain after wearing pointed shoes for half a day. The mean time to complete union was 9.1 months, and the median period was 5.5 months (range, 0.8-29 months). The initial gap of the fracture was 0.60 mm (range, 0.30-1.04 mm).

Conclusions

The results of our case series may help counsel patients in the outpatient clinic that prolonged healing time may be required for the union of symphalangeal toe fractures.

[A prospective study on treatment of Sanders type and calcaneal fractures with interlocking intramedullary nail fixation system]

Objective

To explore the effectiveness of interlocking intramedullary nail fixation system for Sanders type Ⅱ and Ⅲ calcaneal fractures by comparing with open surgery.

Methods

Forty patients (40 feet) with Sanders type Ⅱ and Ⅲ calcaneal fractures, who were admitted between May 2020 and December 2022 and met the selection criteria, were included in the study. They were randomly allocated into control group and minimally invasive group using a random number table method, with 20 cases in each group. The patients were treated with the interlocking intramedullary nail fixation system in the minimally invasive group and with steel plate internal fixation via a lateral L-shaped incision in the control group. There was no significant difference between the two groups ( P>0.05) in terms of gender, age, fracture classification and side, cause of injury, time from injury to admission, and preoperative width, length, height, Böhler angle, and Gissane angle of the calcaneus. The operation time, intraoperative blood loss, incision length, hospital stay, fracture healing time, incidence of complications, as well as pre- and post-operative imaging indicators (Böhler angle, Gissane angle, width, height, and length of the calcaneus) and American Orthopaedic Foot and Ankle Society (AOFAS) score of foot were recorded and compared between the two groups.

Results

The incision length, operation time, and hospital stay of the minimally invasive group were significantly shorter than those of the control group, and the intraoperative blood loss significantly reduced ( P<0.05). All patients of the two groups were followed up, with the follow-up time of 8-12 months (mean, 10.2 months) in the minimally invasive group and 8-12 months (mean, 10.4 months) in the control group. No complication occurred in the minimally invasive group after operation. One case of incision epidermal necrosis and 1 case of traumatic arthritis occurred in the control group after operation. However, there was no significant difference in the incidence of complications between the two groups ( P>0.05). At last follow-up, the AOFAS score was significantly higher in the minimally invasive group than in the control group ( P<0.05). Imaging examination showed that the calcaneal fractures of the two groups healed, and there was no significant difference in healing time between the two groups ( P>0.05). Compared with preoperative conditions, the Böhler angle and Gissane angle of the calcaneus in the two groups significantly increased, the width narrowed, and the height and length increased at 3 days after operation and the last follow-up, with significant differences ( P<0.05). There was no significant difference between 3 days after operation and last follow-up ( P>0.05). There was no significant difference between the two groups at each time point ( P>0.05).

Conclusion

The interlocking intramedullary nail fixation system in treatment of Sanders type Ⅱ and Ⅲ calcaneal fractures has the advantages of minimal trauma, shortened hospital stay, reliable fracture reduction and fixation, and satisfactory foot function recovery.

Biomechanical characteristics of Sanders type II and III calcaneal fractures fixed by open reduction and internal fixation and percutaneous minimally invasive fixation

BACKGROUND

This work investigated the differences in the biomechanical properties of open reduction and internal fixation (ORIF) and percutaneous minimally invasive fixation (PMIF) for the fixation of calcaneal fractures (Sanders type II and III calcaneal fractures as examples) through finite element analysis.

METHODS

Based on CT images of the human foot and ankle, according to the principle of three-point fixation, namely the sustentaculum tali, the anterior process and the calcaneal tuberosity were fixed. Three-dimensional finite element models of Sanders type II and III calcaneal fractures fixed by ORIF and PMIF were established. The proximal surfaces of the tibia, fibula and soft tissue were constrained, and ground reaction force and Achilles tendon force loads were added to simulate balanced standing.

RESULTS

The maximum stress was 80.54, 211.59 and 113.88 MPa for the calcaneus, screws and plates in the ORIF group and 70.02 and 209.46 MPa for the calcaneus and screws in the PMIF group, respectively; the maximum displacement was 0.26, 0.21 and 0.12 mm for the calcaneus, screws and plates in the ORIF group and 0.20 and 0.14 mm for the calcaneus and screws in the PMIF group, respectively. The values obtained from the simulation were within the permissible stress and elastic deformation range of the materials used in the model, and there was no significant stress concentration. The maximum stress and displacement of the calcaneus and implants were slightly lower in the PMIF group than in the ORIF group when fixing Sanders type II and III calcaneal fractures.

CONCLUSIONS

This study may provide a reference for optimising the design of implants, the development of individualised preoperative plans and the choice of clinical surgical approach.

Rehabilitation exercise program after surgical treatment of patellar tendon rupture: A case report

OBJECTIVE

This case report describes in detail a rehabilitation and exercise program following surgical treatment of patellar tendon rupture and offers postoperative therapeutic goals and recommendations, with the aim of expediting the resumption of activities of daily living and sports participation following the surgical procedure. In addition, this report analyzes the cause of the patellar tendon rupture in this case.

DESIGN

Case report.

PARTICIPANTS

The patient, a 25-year-old male recreational athlete (height: 184 cm; weight: 80 kg; right-hand dominant), experienced a complete rupture of the patellar tendon upon landing on the left lower extremity during an unopposed dribble turn.

REHABILITATION EXERCISE PROGRAM

A well-structured rehabilitation program was implemented. Passive knee flexion range of motion (ROM) exceeded 90° at week 5 and was fully recovered at week 16. A second surgery was performed at week 19 to remove the decompression wires, and the patient progressively resumed basic physical and specialized training at 7 months post-surgery.

MAIN OUTCOME MEASURES

Morphometric and functional tests were performed to measure the effectiveness of rehabilitation throughout the postoperative process.

CONCLUSIONS

Early surgical repair and an immediate postoperative rehabilitation program have a positive impact on knee ROM, function, and muscle strength. The causes of the patellar tendon rupture in this patient included long-standing uncontrolled patellar tendinopathy, impaired mobility of the ankle and hip joints, poor landing technique, and muscle strength imbalances.

Neurocognitive Errors and Noncontact Anterior Cruciate Ligament Injuries in Professional Male Soccer Players

CONTEXT

Evidence is emerging that core neurocognitive functions such as working memory and inhibitory control (ie, motor-response and attentional inhibition) are linked to the anterior cruciate ligament (ACL) injury risk. Research has been conducted in laboratory settings, but the contribution of neurocognition to actual ACL injuries under real-world conditions is unknown.

OBJECTIVE

To describe the possible neurocognitive errors involved in noncontact ACL injury mechanisms.

DESIGN

Case series.

SETTING

Soccer matches.

PATIENTS OR OTHER PARTICIPANTS

A total of 47 professional male soccer players.

MAIN OUTCOME MEASURE(S)

Three independent reviewers evaluated 47 videos of players sustaining noncontact ACL injuries. Neurocognitive errors in inhibitory control were operationalized as follows: (1) motor-response inhibition was scored when a player demonstrated poor decision-making and approached the opponent with high speed that reduced the ability to stop or change the intended action and (2) an attentional error was scored when a player shifted his selective attention away from the relevant task to irrelevant stimuli.

RESULTS

Of 47 noncontact ACL injuries, 26 (55%) were related to a pressing-type injury, 19 (73%) of which involved a deceiving action made by the opponent, suggesting poor inhibitory control of the defender. Of the remaining 21 noncontact ACL injuries (45%), 16 (76%) could be attributed to attentional errors. Agreement among the 3 raters was very good for all items except poor decision-making, which showed fair to good agreement (Fleiss κ = 0.71). Interrater reliability was excellent (intraclass correlation coefficient = 0.99-1.00).

CONCLUSIONS

Errors in motor-response inhibitory control and attentional inhibition were common during noncontact ACL injury events in professional male soccer players. The interrater agreement in detecting neurocognitive errors in general was very good.

Single-Dose Radial Extracorporeal Shock Wave Therapy Modulates Inflammation During Meniscal Tear Healing in the Avascular Zone

BACKGROUND

Extracorporeal shock wave therapy (ESWT) promotes tissue healing by modulating inflammation, which has implications for meniscal tear healing in the avascular zone.

PURPOSE

To evaluate the effects of a single dose of radial ESWT on the healing process and inflammation of the meniscus and knee joints after meniscal tears in the avascular zone.

STUDY DESIGN

Controlled laboratory study.

METHODS

Avascular tears were induced in the medial meniscus (MM) of 72 Sprague-Dawley rats. One week postoperatively, the rats received a single session of radial ESWT with a Power+ handpiece (ESWT group; n = 36) or with a fake handpiece (sham-ESWT group; n = 36). The rats were then euthanized at 2, 4, or 8 weeks postoperatively. The MMs were harvested for analysis of healing (hematoxylin-eosin, safranin O-Fast Green, and collagen type 2 staining) and inflammation (interleukin [IL]-1β and IL-6 staining). Lateral menisci and synovia were obtained to evaluate knee joint inflammation (enzyme-linked immunosorbent assay of IL-1β and IL-6). Cartilage degeneration was assessed in the femurs and tibial plateaus using safranin O-Fast Green staining.

RESULTS

The ESWT group showed significantly better meniscal healing scores than the sham-ESWT group at 4 (P = .0066) and 8 (P = .0050) weeks postoperatively. The IL-1β level was significantly higher in the sham-ESWT group than in the ESWT group at 2 (MM: P = .0009; knee joint: P = .0160) and 8 (MM: P = .0399; knee joint: P = .0001) weeks. The IL-6 level was significantly lower in the sham-ESWT group than in the ESWT group at 2 (knee joint: P = .0184) and 4 (knee joint: P = .0247) weeks but higher at 8 weeks (MM: P = .0169; knee joint: P = .0038). The sham group had significantly higher osteoarthritis scores than the ESWT group at 4 (tibial plateau: P = .0157) and 8 (femur: P = .0048; tibial plateau: P = .0359) weeks.

CONCLUSION

A single dose of radial ESWT promoted meniscal tear healing in the avascular zone, modulated inflammatory factors in the menisci and knee joints in rats, and alleviated cartilage degeneration.

CLINICAL RELEVANCE

Radial ESWT can be considered a potential option for improving meniscal tear healing in the avascular zone because of its ability to modulate inflammation.

Morphological characteristics and a new classification system of the inferior pole fracture of the patella: A computer-tomography-based study

PURPOSE

The objective of this study was to measure the morphological characteristics of inferior pole fracture of the patella (IPFP) and develop a practical classification system to determine the corresponding treatment protocols for different IPFPs with specific patterns.

METHODS

A retrospective radiographic review was performed on a series of 71 patients with IPFP. The preoperative CT data were collected and measured using image processing software. The number of fragments, maximum fracture fragment anteroposterior length (MFFAL), maximum fracture fragment transverse length (MFFTL), fracture fragment coronal angle (FFCA), fracture fragment sagittal angle (FFSA), maximum fracture fragment height (MFFH) and maximum transverse sectional area (MTSA) were analysed.

RESULTS

The mean number of fracture fragments was 3.8. The average MFFAL was 14.9 mm, the average MFFTL was 23.5 mm, the average FFCA was 92.1°, the average FFSA was 93.0°, the average MFFH was 13.6 mm, and the average MTSA was 299.3 mm2. A new classification system was introduced to describe the varied patterns of IPFP, summarized as (I) simple IPFP; (II) comminuted IPFP; (III) simple IPFP with simple patellar body fracture; and (IV) comminuted patellar fracture involving the inferior pole. With the four-type classification system, 12 type I, 22 type II, 21 type III, and 16 type IV lesions were observed, each with specific morphological characteristics.

CONCLUSION

Most IPFPs exhibited a diversiform pattern, demonstrating that coverage fixation was likely needed. The four-type classification system might offer a valuable approach to help orthopaedic surgeons make individual treatment plans.

Hamstring and knee injuries are associated with isometric hip and trunk muscle strength in elite Australian Rules and Rugby League players

OBJECTIVES

This study investigated relationships between isometric trunk and hip extensor strength, lumbar muscle morphology, and the risk of hamstring and knee ligament injuries in Australian Football League and National Rugby League players.

DESIGN

Prospective cohort study.

METHODS

Trunk and hip extensor strength, multifidus and quadratus lumborum cross-sectional area were measured during the 2020 pre-season. Logistic regressions and decision trees were employed to explore associations between maximum strength, strength endurance, multifidus and quadratus lumborum cross-sectional area, age, previous injuries, and hamstring and knee ligament injury risk.

RESULTS

Greater strength endurance [odds ratio = 0.42 (0.23-0.74), p = 0.004] and maximum strength [odds ratio = 0.55 (0.31-0.94), p = 0.039] reduced hamstring injury risk. Increased risk of knee ligament injuries was associated with larger multifidus [odds ratio = 1.66 (1.14-2.45), p = 0.008] and higher multifidus to quadratus lumborum ratio (odds ratio = 1.57 (1.13-2.23), p = 0.008]. Decision tree models indicated that low strength endurance (< 99 Nm) characterised hamstring strains, while high (≥ 1.33) multifidus to quadratus lumborum ratio mitigated risk. Knee ligament injuries were associated with larger (≥ 8.49 cm2) multifidus, greater (≥ 1.25) multifidus to quadratus lumborum ratio, and lower maximum strength (< 9.24 N/kg).

CONCLUSIONS

Players with lower trunk and hip extensor maximum strength and strength endurance had increased risk of hamstring injuries, while knee ligament injury risk was elevated with larger multifidus cross-sectional area, higher multifidus to quadratus lumborum ratio, and lower maximum trunk and hip extensor strength.

Posterior Cruciate Ligament Reconstruction Current Concepts Review

Posterior cruciate ligament (PCL) injuries are a rare form of knee injury often seen in the setting of high energy polytraumas; however, these injuries can occur in isolation as well. Often, the posterolateral corner (PLC) is involved, which imparts further posterior translational and rotational instability to these injuries. While non-operative management is certainly a reliable option for low grade isolated PCL tears, high grade injuries with concomitant PLC involvement, additional intra-articular pathologies requiring operative management, multiligamentous injuries, or patients who have failed non-operative management require PCL repair or reconstruction. The current review focuses on the many facets of PCL reconstruction, including single versus double bundle reconstruction, tibial slope implications, graft selection, multiligamentous injury considerations, tunnel management, and onlay versus inlay tibial footprint creation. We conclude with a proposed algorithm in the management of this injury.

Causal relationships between pain, medical treatments, and knee osteoarthritis: A graphical causal model to guide analyses

OBJECTIVE

Randomized controlled trials (RCTs) are a gold standard for estimating the benefits of clinical interventions, but their decision-making utility can be limited by relatively short follow-up time. Longer-term follow-up of RCT participants is essential to support treatment decisions. However, as time from randomization accrues, loss to follow-up and competing events can introduce biases and require covariate adjustment even for intention-to-treat effects. We describe a process for synthesizing expert knowledge and apply this to long-term follow-up of an RCT of treatments for meniscal tears in patients with knee osteoarthritis (OA).

METHODS

We identified 2 post-randomization events likely to impact accurate assessment of pain outcomes beyond 5 years in trial participants: loss to follow-up and total knee replacement (TKR). We conducted literature searches for covariates related to pain and TKR in individuals with knee OA and combined these with expert input. We synthesized the evidence into graphical models.

RESULTS

We identified 94 potential covariates potentially related to pain and/or TKR among individuals with knee OA. Of these, 46 were identified in the literature review and 48 by expert panelists. We determined that adjustment for 50 covariates may be required to estimate the long-term effects of knee OA treatments on pain.

CONCLUSION

We present a process for combining literature reviews with expert input to synthesize existing knowledge and improve covariate selection. We apply this process to the long-term follow-up of a randomized trial and show that expert input provides additional information not obtainable from literature reviews alone.

Beak-type fractures of the calcaneus

Beak fractures represent a rare subtype of calcaneal fractures with potential risk of soft tissue complications due to compromised local perfusion. Early diagnosis and timely intervention are crucial to prevent necrosis, infection, and soft tissue defects. This case report describes a 71-year-old male with a beak fracture and delayed intervention with reoccurring soft tissue defects. Given the rarity of the condition, atypical presentation and need for urgent intervention, this emphasizes the importance of awareness of beak fractures of the calcaneus.

Impact of sustentaculum tali screw positioning on radiographic and functional outcomes in calcaneal fractures

BACKGROUND

To investigate whether accurate placement of sustentaculum tali screws have the impacts on the clinical efficacy of calcaneal fractures.

METHODS

A retrospective analysis of 72 cases (73 feet) of calcaneal fractures from September 2015 to September 2019 treated with open reduction and internal fixation with sustentaculum tali screws was conducted. Patients were divided into the sustentaculum tali fixation group (ST group) and the sustentaculum fragment fixation group (STF group) according to the location of the sustentaculum tali screw placement. The functional outcomes at preoperative, 7 days and 1 year postoperative were collected and analyzed.

RESULTS

In the ST group (40 feet), the Gissane's angle altered from (109.89 ± 12.13)° to (121.23 ± 9.34)° and (119.08 ± 8.31)° at 7 days and 1 year postoperative, respectively. For Böhler's angles altered from (11.44 ± 5.94)°, to (31.39 ± 7.54)°, and (30.61 ± 7.94)° at 7 days and 1 year postoperative, respectively. In the STF group (33 feet), Gissane's angle altered from (110.47 ± 14.45)°, to (122.08 ± 8.84)°, and (120.67 ± 9.07)° and Böhler's angle altered from (11.32 ± 6.77)°, to (28.82 ± 8.52)°, and (28.25 ± 9.13)° (P < 0.001). However, there was no statistically significant difference in functional outcomes at 1 week after surgery and 1 year after surgery (P > 0.05). The AOFAS scores at the final follow-up of the two groups: ST group (88.95 ± 6.16) and STF group (89.78 ± 8.76); VAS scores, ST group (0.83 ± 0.98) and STF group (1.03 ± 1.59), all differences were not statistically significant (P > 0.05).

CONCLUSION

The position of sustentaculum tali screws has no significant difference on the short-term clinical outcome in patients with calcaneal fractures, while reliable fixation of screws to sustentaculum tali fragment can achieve similar clinical outcome.

LEVEL OF EVIDENCE V

Factors influencing functional outcome of fractures of the anterior process of the calcaneus

INTRODUCTION

Fractures of the anterior process of the calcaneus (APC) are easily overlooked in clinical practice. Most patients have good to excellent clinical outcome after conservative treatment, while some patients may have persisting symptoms and unfavorable functional outcomes. The aim of this study was to identify the risk factors associated with unfavorable functional outcome after conservative treatment in APC fractures.

METHODS

All patients presenting with APC fractures and receiving conservative treatment from April 2019 to April 2020 were retrospectively assessed. The primary outcome measurement was the ankle joint function assessed using Karlsson Scoring System at 2 years post-injury. The risk factors associated with unfavorable functional outcomes (Karlsson score ≤ 80) were evaluated by logistic regression analysis.

RESULTS

In total, 84 patients were included with a mean age of 40 years. 26 (31%) patients presented with unfavorable functional outcome at 2 years post-injury. In multivariate logistic regression, concomitant fractures of talonavicular (TN) joints and older age were significantly associated with unfavorable functional outcome (p<0.05). Patients with concomitant fractures of TN joints had an odds ratio of 3.623 for unfavorable functional outcome. The optimal cutoff age for an unfavorable outcome was ≥ 47.5 years, with an odds ratio of 5.010.

CONCLUSION

Most patients with APC fractures achieved good to excellent results when treated conservatively. Attention should be paid to those with concomitant fractures of TN joints and with age ≥ 47.5 years, which might lead to unfavorable functional recovery.

LEVEL OF EVIDENCE

IV; case series.

Common Foot Fractures

Foot fractures account for about one-third of lower extremity fractures in adults. They are typically caused by a crush injury or an axial or twisting force on the foot. Patients usually present with bony point tenderness and swelling of the affected area. Weight-bearing varies based on the extent of the fracture and the patient's pain tolerance. When a foot or toe fracture is suspected, anteroposterior, lateral, and oblique radiography with weight-bearing should be obtained. The Ottawa foot and ankle rules can help determine the need for radiography after an acute ankle inversion injury. Many foot fractures can be managed with a short leg cast or boot or a hard-soled shoe. Weight-bearing and duration of immobilization are based on the stability of the fracture and the patient's pain level. Most toe fractures can be managed nonsurgically with a hard-soled shoe for two to six weeks. Close attention should be paid to the great toe because of its role in weight-bearing, and physicians should follow specific guidelines for orthopedic referral. Meta-tarsal shaft fractures are managed with a boot or hard-soled shoe for three to six weeks. The proximal aspect of the fifth metatarsal has varied rates of healing due to poor blood supply, and management is based on the fracture zone. Lis-franc fractures are often overlooked; radiography with weight-bearing should be obtained, and physicians should look for widening of the tarsometatarsal joint. Other tarsal bone fractures can be managed with a short leg cast or boot for four to six weeks when nonsurgical treatment is indicated. Common foot fracture complications include arthritis, infection, malunion or nonunion, and compartment syndrome.

Application of machine learning-based multi-sequence MRI radiomics in diagnosing anterior cruciate ligament tears

OBJECTIVE

To compare the diagnostic power among various machine learning algorithms utilizing multi-sequence magnetic resonance imaging (MRI) radiomics in detecting anterior cruciate ligament (ACL) tears. Additionally, this research aimed to create and validate the optimal diagnostic model.

METHODS

In this retrospective analysis, 526 patients were included, comprising 178 individuals with ACL tears and 348 with a normal ACL. Radiomics features were derived from multi-sequence MRI scans, encompassing T1-weighted imaging and proton density (PD)-weighted imaging. The process of selecting the most reliable radiomics features involved using interclass correlation coefficient (ICC) testing, t tests, and the least absolute shrinkage and selection operator (LASSO) technique. After the feature selection process, five machine learning classifiers were created. These classifiers comprised logistic regression (LR), support vector machine (SVM), K-nearest neighbors (KNN), light gradient boosting machine (LightGBM), and multilayer perceptron (MLP). A thorough performance evaluation was carried out, utilizing diverse metrics like the area under the receiver operating characteristic curve (ROC), specificity, accuracy, sensitivity positive predictive value, and negative predictive value. The classifier exhibiting the best performance was chosen. Subsequently, three models were developed: the PD model, the T1 model, and the combined model, all based on the optimal classifier. The diagnostic performance of these models was assessed by employing AUC values, calibration curves, and decision curve analysis.

RESULTS

Out of 2032 features, 48 features were selected. The SVM-based multi-sequence radiomics outperformed all others, achieving AUC values of 0.973 and 0.927, sensitivities of 0.933 and 0.857, and specificities of 0.930 and 0.829, in the training and validation cohorts, respectively.

CONCLUSION

The multi-sequence MRI radiomics model, which is based on machine learning, exhibits exceptional performance in diagnosing ACL tears. It provides valuable insights crucial for the diagnosis and treatment of knee joint injuries, serving as an accurate and objective supplementary diagnostic tool for clinical practitioners.

Comparative study of locking neutralization plate construct versus tension band wiring with a cannulated screw for patella fractures: experimental and finite element analysis

Transverse patella fractures, accounting for approximately 1% of Orthopedic injuries, pose intricate challenges due to their vital role in knee mechanics. This study aimed to compare the biomechanical performance of a construct, integrating cannulated screws and an anterior locking neutralization plate, with the conventional tension band wiring technique for treating these fractures. Experimental testing and Finite Element Analysis were employed to evaluate the constructs and gain profound insights into their mechanical behavior. Sixteen cadaveric knees were prepared, and transverse patella fractures were induced at the midpoints using a saw. The plate construct and tension band wire fixation were randomly assigned to the specimens. A cyclic test evaluated the implants' durability and stability, simulating knee movement during extension and flexion. Tensile testing assessed the implants' maximum failure force after cyclic testing, while Finite Element Analysis provided detailed insights into stress distribution and deformation patterns. Statistical analysis was exclusively performed for the experimental data. Results showed the plate enhanced stability with significantly lower deformation (0.09 ± 0.12 mm) compared to wire fixation (0.77 ± 0.54 mm) after 500 cycles (p = 0.004). In tensile testing, the construct also demonstrated higher failure resistance (1359 ± 21.53 N) than wire fixation (780.1 ± 22.62N) (p = 0.007). Finite Element Analysis highlighted distinct stress patterns, validating the construct's superiority. This research presents a promising treatment approach for transverse patella fractures with potential clinical impact and future research prospects. This study presents a promising advancement in addressing the intricate challenges of transverse patella fractures, with implications for refining clinical practice. The construct's improved stability and resistance to failure offer potential benefits in postoperative management and patient outcomes.

Percutaneous reduction and cannulated screw fixation assisted by 3D printing technology of calcaneal fractures in children

BACKGROUND

Percutaneous reduction and cannulated screw fixation (PR + CSF) for treatment of calcaneal fractures in pediatric patients has been proven to achieve satisfactory outcomes with few complications. But it is also a difficult technology due to the limited exposure and surgeons are unable to reduce articular surface under direct vision. The purpose of this study was to analyze the outcomes of applying 3D printing technology to preoperative preparation and Intraoperative operating for the treatment of calcaneal fractures in children.

METHODS

Pediatric patients with calcaneal fractures from January 2010 to December 2018 were reviewed during study period. Preoperative radiographs and computed tomography scans were collected to classify the fractures, reconstruct 3D printed model and evaluate postoperative outcomes. The blood loss, operative time, number of fluoroscopies, surgeon and patient satisfaction were used to assess the effectiveness, feasibility and safety of 3D printing technology. Functional results were measured by American Orthopedic Foot and Ankle Society (AOFAS) hindfoot score.

RESULT

12 patients (10 boys and 2 girls) with 17 fractures were involved in our study. There were significant differences in the average Böhler angle before operation compared with that after operation and at last follow-up (P < 0.001). Similarly, the calcaneal height and length postoperatively and at the end of follow-up time were proved to have significant difference (P < 0.05) compared to preoperative. CT scan showed good reduction of the posterior facet according to Goldzak index. The average subjective AOFAS hindfoot score was 94.1. Both patients and surgeon made sense of the 3D printed model that can help them getting more information about the factures and making preoperative plans. No wound complication was found in this study.

CONCLUSION

This study indicated that percutaneous reduction and cannulated screw fixation (PR + CSF) assisted by 3D printing technology in the treatment of calcaneal fractures in pediatric patients achieve good outcomes, with specific preoperative preparation, satisfactory functional recovery and fewer complications.

LEVEL OF EVIDENCE

III.

External fixation in intra-articular fractures of the calcaneus: Is it a valid option as definitive treatment?

INTRODUCTION

The therapeutic management of calcaneal fractures is currently a major source of controversy in the literature. There is no consensus on the need to treat these injuries conservatively or surgically, nor on the criteria for deciding one option or the other. Although the gold standard has classically been the open approach and osteosynthesis, there are currently minimally invasive techniques that also report good results. Our objective is to present our results and experience with the MBA® Orthofix external fixator in a series of cases of calcaneal fractures.

METHODS

We performed a retrospective observational study in our center, between the years 2019 and 2021, of Sanders types II-IV calcaneal fractures operated with MBA® Orthofix external fixator. We recorded a total of 38 patients, 42 fractures. We registered demographic information, intraoperative, postoperative, radiological and functional parameters, using the American Orthopedic Foot and Ankle Society (AOFAS), Manchester-Oxford Foot Questionnaire (MOXFQ), EQ-5D and VAS scales.

RESULTS

A total of 26 men and 12 women were included, and the median age was 38 years. Mean follow-up was 24,4 months (6, 8-40, 1). The average time to surgery was 7 days and partial loading was started at 2.5 weeks after external fixation, which was removed at 9.2 weeks. The average Böhler angle correction was 7, 4°, Gissane - 12,2°, length 2 mm and calcaneal width was reduced by 5 mm. We recorded two superficial infections, one peroneal entrapment and three subtalar arthrodesis due to post-traumatic osteoarthritis. The AOFAS obtained was 79.1 + / - 15.7 points, MOXFQ 20.1 + / - 16.1 points, EQ-5D 0.84 + / - 0.2 and VAS 3.3 + / - 1.9.

CONCLUSION

The external fixator is an excellent surgical alternative for complex articular fractures of the calcaneus, obtaining clinical and radiological results comparable to other osteosynthesis techniques and significantly reducing soft tissue complications.

Sex differences in pelvis, thigh, and shank coordination during walking

Differences in lower limb kinematics between males and females during functional activities may be attributed to sex differences in the incidence of patellofemoral pain, which is more common in females. To better comprehend the knee joint motion, it is necessary to understand both inter-segmental coordination patterns and angular amplitude. This exploratory study aimed to assess sex differences in pelvis-thigh and thigh-shank coordination patterns in the frontal and horizontal planes during walking. Data regarding the kinematic characteristics of the pelvis, thigh, and shank segments were collected from 26 males and 26 females performing walking at self-selected speeds using a 3D motion capture system. Furthermore, we compared the kinematics of the pelvis, thigh, and shank during walking as well as the pelvis-thigh and thigh-shank coordination patterns in the frontal and horizontal planes during the stance phase between males and females. Compared to males, females had greater thigh adduction (p < 0.001) and internal rotation (p < 0.001) throughout the stance phase; significantly greater frequency of the pelvis-thigh anti-phase pattern in the frontal plane in the early (p = 0.002) and mid-stance (p = 0.003); and significantly greater thigh-shank anti-phase pattern in the frontal plane in the early (p = 0.001) and mid-stance (p = 0.015). These results suggest the presence of sex differences in the inter-segmental coordination of the pelvis and lower limb during walking. However, as this study could not determine a causal relationship between female sex and knee joint injury, further longitudinal studies are needed to determine the effects of differences in coordination patterns on the pathophysiology of the injury and pain generation.

Neo-Natal Castration Leads to Subtle Differences in Porcine Anterior Cruciate Ligament Morphology and Function in Adolescence

Female adolescent athletes are at a higher risk of tearing their anterior cruciate ligament (ACL) than male counterparts. While most work related to hormones has focused on the effects of estrogen to understand the increased risk of ACL injury, there are other understudied factors, including testosterone. The purpose of this study was to determine how surgical castration in the male porcine model influences ACL size and function across skeletal growth. Thirty-six male Yorkshire crossbreed pigs were raised to 3 (juvenile), 4.5 (early adolescent), and 6 months (adolescent) of age. Animals were either castrated (barrows) within 2 weeks after birth or were left intact (boars). Posteuthanasia, joint and ACL size were assessed via MRI, and biomechanics were assessed via a robotic testing system. Joint size increased throughout age, yet barrows had smaller joints than boars. ACL cross-sectional area (CSA), length, volume, and in situ stiffness increased with age, as did the percent contribution of the ACL anteromedial (AM) bundle to resisting loads. Boar ACL, AM bundle, and PL bundle volumes were 19%, 25%, and 15% larger than barrows across ages. However, ACL CSA, in situ stiffness, and bundle contribution were similar between boars and barrows. The barrows had smaller temporal increases in AM bundle function than boars, but these data were highly variable. Early and sustained loss in testosterone leads to subtle differences in ACL morphology but may not influence measures associated with increased injury risk, such as CSA or bundle forces in response to applied loads.

Establishing patient-centered metrics for the knee injury and osteoarthritis outcome score following medial unicompartmental knee arthropalsty

BACKGROUND

This study aimed to determine the minimal clinically important difference (MCID) and the patient acceptable symptoms state (PASS) threshold for the knee injury and osteoarthritis outcome score (KOOS) pain subscore, KOOS physical short form (PS), and KOOS joint replacement (JR) following medial unicompartmental knee arthroplasty (mUKA).

METHODS

Prospectively collected data from 743 patients undergoing mUKA from a single academic institution from April 2015 through March 2020 were analyzed. Patient-reported outcome measures (PROMs) were collected both pre-operatively and 1-year post-operatively. Distribution-based and anchored-based approaches were used to estimate MCIDs and PASS, respectively. The optimal cut-off point and the percentage of patients who achieved PASS were also calculated.

RESULTS

MCID for KOOS-pain, KOOS-PS, and KOOS-JR following mUKA were calculated to be 7.6, 7.3, and 6.2, respectively. The PASS threshold for KOOS pain, PS, and JR were 77.8, 70.3, and 70.7, with 68%, 66%, and 64% of patients achieving satisfactory outcomes, respectively. Cut-off values for delta KOOS pain, PS, and JR were found to be 25.7, 14.3, and 20.7 with 73%, 69%, and 68% of patients achieving satisfactory outcomes, respectively.

CONCLUSION

The current study identified useful values for the MCID and PASS thresholds at 1 year following medial UKA of KOOS pain, KOOS PS, and KOOS JR scores. These values may be used as targets for surgeons when evaluating PROMS using KOOS to determine whether patients have achieved successful outcomes after their surgical intervention. Potential uses include the integration of these values into predictive models to enhance shared decision-making and guide more informed decisions to optimize patient outcomes.

LEVEL OF EVIDENCE

III.

Lower extremity and trunk sagittal plane coordination strategies and kinetic distribution during landing in males and females

Force attenuation during landing requires coordinated motion of the ankle, knee, hip, and trunk, and strategies may differ between sexes. Sagittal plane coordination of the ankle/knee, knee/hip, and knee/trunk, and lower extremity and trunk kinematics and kinetics was compared throughout landing between 28 males and 28 females. Coordination was assessed with a modified vector coding technique and binning analysis. Total support moments (TSM), each joint's percent contribution, and timing of the TSM were compared. Females landed with less isolated knee flexion in the ankle/knee, knee/hip, and knee/trunk couplings, but more simultaneous ankle/knee flexion, less simultaneous knee flexion/hip extension, and more simultaneous trunk/knee flexion. Females landed with larger plantarflexion angles from 0-16% and smaller trunk flexion angles from 0-78%. In females, absolute TSM were larger from 0-6% and smaller from 42-100%, and normalized TSM were larger from 0-8% and 26-42%. Females had greater ankle contribution to the TSM from 14-15% and 29-35%, smaller absolute peak TSM, and the peak TSM occurred earlier. Females compensated for less isolated knee flexion with greater simultaneous ankle/knee flexion early in landing and knee/trunk flexion later in landing. Coordination and TSM differences may influence force attenuation strategies and have implications for knee injury disparity between sexes.

The Value of Minimal Clinically Important Difference, Substantial Clinical Benefit, and Patient-Acceptable Symptomatic State for Commonly Used Patient-Reported Outcomes in Recurrent Patellar Instability Patients After Medial Patellofemoral Ligament Reconstruction and Tibial Tubercle Transfer

PURPOSE

To identify the minimal clinically important difference (MCID), substantial clinical benefit (SCB) and patient-acceptable symptomatic state (PASS) for commonly used patient-reported outcomes (PROs) in recurrent patellar instability patients after medial patellofemoral ligament reconstruction (MPFLR) and tibial tubercle transfer (TTT), and to determine the impact of potential prognostic factors on the likelihood of achieving these values.

METHODS

From April 2015 to February 2021, patients who underwent MPFLR and TTT were retrospectively reviewed. PROs included Kujala, Knee Injury and Osteoarthritis Outcome (KOOS), Lysholm, International Knee Documentation Committee (IKDC), and Tegner score. Relevant anchor questions were provided. A distribution- or anchor-based method was adopted to determine the MCID, SCB, and PASS. Minimal detectable change (MDC) was included to confirm the validity. Univariate regression analyses were conducted to determine the potential prognostic factors.

RESULTS

One hundred forty-two patients were included. The MCID were 9.1 (Kujala), 11.1 (Lysholm), 0.9 (Tegner), 9.9 (IKDC), 9.0 (KOOS-Pain), 10.8 (KOOS-Symptoms), 10.0 (KOOS-Activities of Daily Living [ADL]), 17.8 (KOOS-Sports and Recreation [Sports/Rec]), and 12.7 (KOOS-Quality of Life [QoL]). The SCB were 14.5 (Kujala), 12.5 (Lysholm), 1.5 (Tegner), 14.5 (IKDC), 13.9 (KOOS-Pain), 14.3 (KOOS-Symptoms), 18.4 (KOOS-ADL), 47.5 (KOOS-Sports/Rec), and 15.0 (KOOS-QoL). The PASSs were 85.5 (Kujala), 75.5 (Lysholm), 3.5 (Tegner), 73.2 (IKDC), 87.5 (KOOS-Pain), 73.2 (KOOS-Symptoms), 92.0 (KOOS-ADL), 77.5 (KOOS-Sports/Rec), and 53.1 (KOOS-QoL). All SCBs were valid except KOOS-QoL. All MCIDs were valid at the 95% confidence interval (CI) except KOOS scores, the majority of which were valid at the 90% CI. A younger age was an independent prognostic factor of reaching PASS for Lysholm, IKDC, Tegner, and KOOS-ADL score. A higher baseline score was a negative prognostic factor for achieving MCID or SCB but had a slightly positive influence on the achievement of PASS.

CONCLUSIONS

This study established the MCID, SCB, and PASS for commonly used PROs and confirmed their validity in recurrent patellar instability patients after MPFLR and TTT. Younger age and lower baseline scores were prognostic factors of achieving MCID and SCB, whereas patients with higher baseline scores were more likely to report satisfaction.

LEVEL OF EVIDENCE

Level III, retrospective comparative prognostic trial.

Association between quadriceps tendon elasticity and neuromuscular control in individuals with knee osteoarthritis

BACKGROUND

Knee osteoarthritis is a complex condition with established risk factors such as female sex, increasing age and body mass index, reduced quadriceps muscle strength and knee injury. Despite known associated risks, the role and behaviour of knee tendons in knee osteoarthritis remains unclear. This study explores the association between quadriceps tendon elasticity, muscle strength, neuromuscular control, proprioception and patient reported outcome measures in individuals with knee osteoarthritis.

METHODS

Adults with doctor-diagnosed knee osteoarthritis were recruited from rheumatology clinics and general practitioner practices. Quadriceps tendon elasticity was estimated using sonoelastography. Neuromuscular control data including electromyography, electromechanical delay and proprioception measures were included. Participants completed the Knee Injury and Osteoarthritis Outcome Score. Associations between elasticity values, physical and neuromuscular data and patient reported outcomes scores were evaluated using Spearman's correlations.

FINDINGS

Thirty-nine adults with knee osteoarthritis were eligible for inclusion. Increased tendon stiffness was negatively associated with rate of force development, time to half peak force and passive positioning sense in individuals with knee osteoarthritis. Similarly, patient reported symptoms were found to be associated with sonoelastography findings with moderate-strong associations observed between activities of daily living sport and recreation, pain and symptoms and between neuromuscular control measures and muscle strength.

INTERPRETATION

Stiffer tendon identified within the knee osteoarthritis group was associated with reduced neuromuscular control and knee joint proprioception. Stiffer quadriceps tendon may contribute to the poorer reported symptoms by knee osteoarthritis individuals. These findings may impact disease symptoms and progression which could lead to further joint impairment.

Patellofemoral Osteoarthritis Progression After Open-Wedge High Tibial Osteotomy Does Not Affect the Clinical Outcomes or Survivorship at Minimum 7 Years' Follow-Up

PURPOSE

To evaluate the clinical and radiologic outcomes of open-wedge high tibial osteotomy (OWHTO) with respect to the patellofemoral joint and to assess the effects of patellofemoral osteoarthritis (OA) progression after OWHTO on clinical outcomes at minimum 7 years' follow-up.

METHODS

We retrospectively reviewed 95 knees that underwent OWHTO and at least 7 years of follow-up. Clinical parameters including anterior knee pain, Japanese Orthopedic Association score, Oxford Knee Score, Knee Injury and Osteoarthritis Outcome Score, Hospital for Special Surgery patella score, and Knee Injury and Osteoarthritis Outcome Score-patellofemoral subscale were evaluated. Radiologic outcomes were evaluated preoperatively and at final follow-up. Patellofemoral OA progressions were evaluated using Kellgren-Lawrence grade, and we divided the patients into 2 groups (progression group and non-progression group) to evaluate the effect of patellofemoral OA progression after OWHTO on long-term clinical outcomes.

RESULTS

The mean follow-up period was 10.8 ± 2.6 years (range: 7.6-17.3 years). The mean Japanese Orthopedic Association score significantly improved (from 64.4 ± 11.6 to 90.9 ± 9.3, P < .001), and the mean Oxford Knee Score at final follow-up was 40.4 ± 8.3. Due to medial OA progression, 5 cases were converted to total knee arthroplasty, and the survival rate was 94.7% at 10.8 years of follow-up. Radiologically, patellofemoral OA progression was observed at final follow-up in 48 knees (50.5%). However, there were no significant differences in all clinical outcomes at final follow-up between the progression and non-progression groups.

CONCLUSIONS

Patellofemoral OA progression may progress over long-term follow-up after OWHTO. Related symptoms are minimal and this does not affect the clinical outcomes or survivorships at minimum 7 years follow-up.

LEVEL OF EVIDENCE

Level IV, therapeutic case series.

Ultrasonographic diagnosis of medial meniscus posterior root tear in early knee osteoarthritis: a comparative study

INTRODUCTION

This study aimed to detect medial meniscal posterior root tear (MMPRT) diagnostic methods with high sensitivity and specificity using dynamic ultrasonographic evaluation in patients with early knee osteoarthritis (OA) and demonstrate the usefulness of dynamic ultrasonographic medial meniscal extrusion (MME) evaluation in MMPRT diagnosis using a cutoff value.

MATERIALS AND METHODS

Between 2018 and 2020, a total of 120 patients were diagnosed with early knee OA using clinical and radiographic findings. Dynamic ultrasonographic evaluations and magnetic resonance imaging were performed in all patients, and 47 patients who had and 73 patients who did not have MMPRT were classified into the MMPRT and non-MMPRT groups, respectively. Age, sex, femorotibial angle, MME of knee extension and flexion, and MME at weight-bearing were compared between the two groups. Additionally, the sensitivity and specificity of significant ultrasonographic findings were calculated using a receiver operating characteristic (ROC) curve.

RESULTS

The MMEs under knee extension-flexion and weight-loading in the MMPRT group were significantly larger than those in the non-MMPRT group. ROC curve analysis for each ultrasonographic evaluation condition to diagnose MMPRT indicated that the sensitivity was 72-88% and the specificity was 66-85% when the cutoff values of MME under knee flexion at 0°, 90°, and weight-loading were set at 2.55 mm, 2.00 mm, and 3.55 mm, respectively. The highest sensitivity (88%) and specificity (85%) were exhibited upon > 2 mm MME at a knee flexion of 90° and were the most useful indicators for MME diagnosis.

CONCLUSIONS

Ultrasonographic MME evaluations for MMPRT diagnosis showed relatively high sensitivity and specificity in patients with early knee OA. Dynamic ultrasonographic MME evaluation may lead to appropriate additional examinations, early diagnosis, and intervention for MMPRT in patients with early knee OA.

Anthropometric measurements of the foot cannot predict the screw diameter for fifth metatarsal fractures intramedullary fixation

PURPOSE

The present study aimed to evaluate the accuracy of anthropometric foot measurements in predicting the diameter of the intramedullary screw for fifth metatarsal fracture fixation. Secondary aim was to identify whether the fifth metatarsal intramedullary canal diameter is correlated to the fifth metatarsal length and the foot dimensions.

METHODS

In 29 cadaveric feet, the maximum length of the plantar surface of the foot (PL) and the perimeter of the foot at the level of the fifth metatarsal base (PBFM) were measured using a measuring tape. Subsequently, the fifth metatarsal was excised. Using Computed Tomography scan, the metatarsal length (FML), and the horizontal (HDI) and vertical diameter (VDI) at the isthmus level were measured. The HDI values were grouped in 5 mm increments to correspond to the recommended screw diameter (RSD) for intramedullary fixation. A univariate linear regression analysis considered RSD and HDI as the dependent variables and FML, PL, PBFM as the independent variables. A multivariate regression analysis was performed to examine the predictive value of the two anthropometric measurements. A p-value < 0.05 was considered statistically significant.

RESULTS

All six univariate analyses revealed that the dependent variable was significantly correlated with the independent variable. However, the multivariate regression models showed that the anthropometric measurements were not significantly correlated with the RSD and HDI.

CONCLUSION

The current study found an association between the fifth metatarsal intramedullary canal diameter and the fifth metatarsal length and foot anthropometric dimensions. However, the anthropometric measurements of the foot presented a low predictive value for the decision of an intramedullary screw diameter in the treatment of fractures of the base of the fifth metatarsal.

Minimally Invasive Treatment of Inversion Shortening Calcaneal Fractures in the "Out-In" Position

OBJECTIVE

Heel fractures need extensive surgical incisions and are challenging to successfully reposition using traditional prying. The goal of this study is to evaluate the clinical effectiveness of using a Kirschner pin-guided distractor to treat inversion shortening calcaneal fractures in the "out-in" position.

METHODS

A total of 40 data from 37 patients with inversion shortened calcaneal fractures from January 2018 to March 2020 were reviewed. Preoperative lateral and axial X-rays and 3D CT were taken to assess the fracture type, and minimally invasive internal fixation was performed in the "out-in" position with distractor repositioning, and intraoperative and postoperative images were taken to assess fracture repositioning and fixation. During the follow-up period, the postoperative functional recovery status was assessed using the VAS score, AOFAS score, and FAOS score. Paired-samples t-test was used for all data comparisons.

RESULTS

All cases received a mean follow-up of 28.49 ± 3.25 months, and the mean fracture healing time was 7.84 ± 0.71 weeks. The postoperative images showed well-fixed fracture repositioning, and calcaneal height, length, width, and inversion angles were significantly improved. At the final follow-up, the calcaneal height, length, and width recovered from 39.35 ± 4.44mm, 79.35 ± 2.7mm, and 45.75 ± 2.87mm preoperatively to 50.93 ± 3.18mm, 82.23 ± 1.90mm, and 39.67 ± 1.58mm postoperatively (p < 0.001; p < 0.001; p < 0.001). The calcaneus inversion angle restored from 7.73° ± 2.26° to 3.80° ± 1.80° (p < 0.001). Böhler's angle and Gissane's angle improved from 13.13° ± 3.02° and 105.15° ± 8.94° to 27.95° ± 3.41° and 122.85° ± 5.54° (p < 0.001; p < 0.001). No non-healing fractures, osteomyelitis, or traumatic arthritis were observed.

CONCLUSION

Minimally invasive internal fixation with distractor repositioning in the "out-in" position is effective in the treatment of inversion shortening calcaneal fractures while restoring the anatomy and protecting the soft tissue.

Comparison of different intraoperative reduction monitoring methods in a cadaveric intraarticular calcaneal fracture model: 3D scan vs arthroscopy vs nanoscopy

AIMS

Visualization of the subtalar joint surface in surgical management of calcaneal factures remains a big challenge and anatomic reduction of the articular surface is essential for a good clinical outcome. We hypothesize that video-assistance can provide superior fracture reduction compared to fluoroscopy and that nanoscopy (NSC) achieves more extensive visualization compared to fracturoscopy (FSC).

METHODS

Ten human cadaveric feet with artificially pre-fractured intraarticular calcaneal fractures with involvement of the posterior facet were treated via a minimal invasive subtalar approach. After initial control of reduction by 2D fluoroscopy, the reduction was further analyzed intraoperatively by FSC and NSC. 3D Scan served as gold standard control of reduction. Need of revision of reduction after the different visualization techniques was recorded and the extent of visualization of the subtalar joint surface in the medio-lateral dimension was compared for FSC and NSC. To quantify access and visualization of the medial and posterior facet, a depth gauge was used to measure from laterally at the clinically widest portion of the calcaneus targeted to the sustentaculum tali. The distance in millimetres was referred to the complete medio-lateral distance seen on paracoronal CT at the widest portion of the calcaneus.

RESULTS

Fracture analysis in preoperative CT-scans according to Sanders classification revealed four type IC, two IIA, three IIC and one IIIAC fractures. Mean visualization of the medial and posterior facet was significantly improved with NSC (30.4 ± 3.78 mm) compared to FSC (23.6 ± 6.17 mm) (p = 0.008). An imperfect reduction requiring revision was more often required with NSC compared to FSC. Insufficient reduction using video-assistance was found in two cases.

CONCLUSION

In order to optimize subtalar joint reduction and congruency, video-assisted techniques, especially NSC, provide superior visualization and thus can improve reduction in the surgical treatment of intraarticular calcaneal fractures.

Cumulative Incidence of All-Cause Knee Injury, Concussion, and Stress Fracture among Transgender Patients on Gender-Affirming Hormone Therapy: An Exploratory Retrospective Cohort Study

Previous research has shown a discrepancy in incidences of knee injuries, stress fractures, and concussions between cisgender men and women. Little is known regarding the incidence of musculoskeletal injuries among patients on gender-affirming hormone therapy (GAHT). This retrospective cohort study examines cumulative incidence of knee injuries, concussions, and stress fracture injuries among transgender patients on GAHT at one health system from 2011-2020. Using relevant ICD-9 and 10 codes, incidences of knee injury, concussion, and stress fracture were calculated. Cohorts included 1971 transgender and 3964 cisgender patients. Transgender patients had significantly higher incidence of all-cause knee injuries over the study period, 109 (5.5%) versus 175 (4.4%) (p < 0.001; OR: 2.14, 95% CI [1.17-3.92]). Subgroup analysis showed significantly higher incidence of knee injuries among cisgender men (5.6%) versus cisgender women (4.1%) (p = 0.042) and among transgender women (6.6%) versus cisgender women (4.1%) (p = 0.005). There were no significant differences between incidences of concussion and stress fracture between groups. This sample showed that patients on GAHT had increased cumulative incidences of all-cause knee injury compared to controls but similar cumulative incidences of concussion and bone-stress injuries. Transgender women on exogenous estrogen had significantly higher cumulative incidences of all-cause knee injuries compared to cisgender women.

Comparing Short-Term Knee-Related Quality of Life and Associated Clinical Outcomes Between Youth With and Without a Sport-Related Knee Injury

OBJECTIVE

To compare short-term changes in knee-related quality of life (QOL) and associated clinical outcomes between youth with and without a sport-related knee injury.

DESIGN

Prospective cohort study.

SETTING

Sport medicine and physiotherapy clinics.

PARTICIPANTS

Youth (11-19 years old) who sustained an intra-articular, sport-related knee injury in the past 4 months and uninjured youth of similar age, sex, and sport.

INDEPENDENT VARIABLE

Injury history.

MAIN OUTCOME MEASURES

Knee-related QOL (Knee injury and Osteoarthritis Outcome Score, KOOS), knee extensor and flexor strength (dynamometry), physical activity (accelerometer), fat mass index (FMI; bioelectrical impedance), and kinesiophobia (Tampa Scale for Kinesiophobia, TSK) were measured at baseline (within 4 months of injury) and at 6-month follow-up. Wilcoxon rank sum tests assessed between-group differences for all outcomes. Regression models assessed the association between injury history and outcome change (baseline to 6-month follow-up), considering sex. The influence of injury type, baseline values, and physiotherapy attendance was explored.

RESULTS

Participants' (93 injured youth, 73 uninjured control subjects) median age was 16 (range 11-20) years and 66% were female. Despite greater improvements in KOOS QOL scores (20; 95% confidence interval, 15-25), injured participants demonstrated deficits at 6-month follow-up (z = 9.3, P < 0.01) compared with control subjects, regardless of sex. Similar findings were observed for knee extensor and flexor strength and TSK scores but not for physical activity or FMI. Lower baseline values were associated with greater outcome changes in injured youth.

CONCLUSIONS

Youth have worse knee-related QOL, muscle strength, and kinesiophobia early after a sport-related knee injury than control subjects. Despite improvements, deficits persist 6 months later.

The association between knee muscle performance and clinical outcomes of knee function 1-4 years after a sport-related knee joint injury

OBJECTIVE

Estimate the association between index leg knee muscle strength and rate of torque development (RTD), and self-reported and performance-based (i.e., hop) knee function in persons 1-4 years after a sport-related knee joint injury.

METHODS

Data were collected at baseline of a clinical trial. Assessments included the Knee injury and Osteoarthritis Outcome Score Sport & Recreation subscale (KOOSsport), 6-m timed hop (TH), and peak concentric isokinetic knee extensor and flexor torque and isometric RTD. Associations between peak torque and RTD with KOOSsport and TH were assessed using multivariable regression with nonlinear transformations.

RESULTS

53 participants (64.2% female) were included. Knee extensor peak torque was nonlinearly related to TH time, with a strong inverse relationship at lower torque values that changed as torque increased. Results were inconsistent for flexor peak torque, extensor RTD and flexor RTD, with inconsistencies in relationship shape and estimates of association between primary and sensitivity analyses. There was no association between strength/RTD and KOOSsport.

CONCLUSION

There was a nonlinear relationship between knee extensor strength and hop function, with lower strength being associated with a stronger relationship. As strength values increased, the relationship attenuated. Knee extensor and flexor strength, or RTD, were not associated with self-reported function.

Novel screw-cable integrated system(SCIS) for minimally invasive treatment of patella transverse fractures: a finite element analysis

BACKGROUND

The most recommended method for treating transverse patella fractures is modified tension band wiring (MTBW). However, the optimal instrument for use with MTBW is still undetermined. Hence, we aimed to design a novel screw-cable integrated system (SCIS) and compare its biomechanical characteristics with Kirschner-wire, SCIS, and Cable-Pin systems in treating transverse patellar fracture.

METHODS

A finite-element (FE) model of transverse patella fracture was created. The fracture model was fixed with either K-wire, SCIS, or Cable-pin. Different tension force loading (400 N and 800 N), direction(0° and 45°), and screw or K-wire depth(5 mm and 10 mm) were set. The maximum displacement of the fragment and maximum gap opening were measured by using FE analysis.

RESULTS

Compared with the K-wire and Cable-pin system, SCIS increased the stability of the fractured patella by reducing fragment displacement and gap opening. Under 400 N loading in the direction 45°, SCIS with screw placing at 5-mm depth reduced the maximum fragment displacement (0.43 mm) by 49.62% and 26%, respectively, compared with the K-wire (0.22 mm) and Cable-pin (0. 22 mm) group. Meanwhile, the gap opening in SCIS (0.05 mm) was reduced by 83% and 59.8% (0.05 to 0.18) compared with the K-wire (0.30 mm) and Cable-pin (0.18 mm) group.

CONCLUSION

SCIS demonstrated improved biomechanical stability for treating transverse patellar fractures compared to MTBW with Kirschner wire and the Cable-Pin system. Finite element analysis showed SCIS substantially reduced fracture fragment displacement and gap opening under various loading conditions.

A novel technique of a new cannulated screw for treatment of inferior pole patellar fractures: a finite element study

OBJECTIVE

We invented a new cannulated screw with holes on the tail, which called Ding's screw. The goal of this study was to evaluate the biomechanical outcomes of this new screw with tension band wiring for the treatment of inferior pole patellar fractures in a finite element model.

METHODS

We conducted a finite element biomechanical study using two fixation methods: Ding's screw and tension band wiring (DSTBW) and cannulated screws and tension band wiring (CSTBW). Two methods were simulated to fix the inferior pole patellar fracture in a finite element model. The relative displacement and stress distribution were analyzed and compared.

RESULT

There were less displacement and stress distribution of DSTBW in different knee movement (30°, 60°, 90°, 120°) when compared to CSTBW. The highest value of displacement of the fracture and von Mises stress of the internal fixation happened in 120° knee movement in both groups. The highest displacement of the DSTBW was less than that of the CSTBW (1.92 mm to 2.12 mm). The highest value of the stress on the screws was 110.60 MPa in DSTBW group, and 132.90 MPa in CSTBW group. The highest value of the stress on the titanium cable was 38.51 MPa in DSTBW group, and 41.91 MPa in CSTBW group.

CONCLUSION

DSTBW fixation provides more stability than CSTBW fixation model in a finite element study.

Candy box technique for the fixation of inferior pole patellar fractures: finite element analysis and biomechanical experiments

BACKGROUND

Maintaining effective reduction and firm fixation in inferior pole patellar fractures is a highly challenging task. There are various treatment methods available; although tension-band wiring combined with cerclage wiring (TBWC) is the mainstream approach, its effectiveness is limited. Herein, we propose and evaluate a new technique called candy box (CB), based on separate vertical wiring (SVW), for the treatment of inferior pole patellar fractures. Specifically, we provide biomechanical evidence for its clinical application.

METHODS

Five fixation models were built: SVW combined with cerclage wiring (SVWC); TBWC; modified SVW with the middle (MSVW-A) or upper (MSVW-B) 1/3 of the steel wire reserved, and CB. A finite element analysis was performed to compare the displacement and stress under 100-N, 200-N, 300-N, 400-N and 500-N force loads. Three-dimensional printing technology was utilized to create fracture models, and the average displacement of each model group was compared under a 500-N force.

RESULTS

The results of the finite element analysis indicate that CB technology exhibits significantly lower maximum displacement, bone stress, and wire stress compared to that with other technologies under different loads. Additionally, in biomechanical experiments, the average force displacement in the CB group was significantly smaller than that with other methods under a 500-N force (P < 0.05).

CONCLUSIONS

CB technology has the potential to overcome the limitations of current techniques due to its superior biomechanical characteristics. By incorporating early functional exercise and ensuring strong internal fixation, patient prognosis could be enhanced. However, further clinical trials are needed to fully evaluate the therapeutic effects of CB technology.

The effectiveness of telehealth gait retraining in addition to standard physical therapy treatment for overuse knee injuries in soldiers: a protocol for a randomized clinical trial

INTRODUCTION

Running is the most common cardiovascular exercise in the military. However, there is a high incidence of running-related overuse injuries that reduces military readiness. Gait retraining is a common intervention to treat running-related injuries, but the high cost of equipment and lack of clinician expertise and availability reduces utilization. Gait retraining intervention in a telehealth format might improve feasibility. The purpose of this randomized clinical trial is to determine the effectiveness of a telehealth gait retraining intervention on pain, self-reported function, and biomechanical risk factors for injury in service members who present to a Military Health System physical therapy clinic with an overuse knee injury.

METHODS

This is a parallel, two-arm, single-blind randomized clinical trial. The two independent variables are intervention (2 levels: telehealth gait retraining intervention with standard of care or only standard of care) and time (3 levels: baseline, 10 weeks or post-intervention, 14 weeks). Participants between the ages of 18 to 60 years will be included if they report knee pain during and/or after running to be anywhere from a 3 to a 7 on the numerical pain rating scale and demonstrate a rearfoot strike pattern. The primary dependent variables are as follows: (1) pain (worst pain during and/or after running) and (2) foot strike pattern (conversion rate from rearfoot to non-rearfoot foot strike pattern during running). Secondary outcomes include patient self-reported function and running biomechanics.

DISCUSSION

The effectiveness of a telehealth gait retraining intervention to reduce pain and modify foot strike pattern is not known. The results of this study may help determine the effectiveness and feasibility of a telehealth gait retraining intervention to reduce pain, change foot strike, improve function, and improve running gait biomechanics.

TRIAL REGISTRATION

ClinicalTrials.gov, NCT04269473 . Registered 05 February 2020.

Three-dimensional printed cast assisted screw fixation of calcaneal fractures: a prospective study

BACKGROUND

Treatment of displaced intra-articular calcaneal fractures (DIACFs) with percutaneous screw fixation remains defective in some aspects. A novel three-dimensional (3D) printed cast was devised to assist screw placement. This study assessed the radiological and functional outcomes of 3D-printed cast assisted screw fixation for patients with DIACFs.

METHODS

Patients with unilateral Sanders type II or III DIACFs admitted to a single-centre hospital underwent either 3D-printed cast assisted screw fixation (3D group) or minimally invasive plate fixation (control group) from September 2020 to November 2022. All patients were assessed at one, two, three, and six months of follow-up. Comparison between groups was conducted in operative duration, fluoroscopic times, radiographic measurements of the calcaneus, and the American Orthopaedic Foot and Ankle Society (AOFAS) Ankle-Hindfoot Score.

RESULTS

A total of 32 patients were enrolled (19 in the 3D group versus 13 in the control group). Significant differences were detected between the 3D group and control group in operative duration (53.63±8.95 min, 95.08±8.31 min, P <0.001), fluoroscopic times (7.37±1.21, 16.85±1.57, P <0.001). At a follow-up of six months, the 3D group showed better restoration than the control group in calcaneal width, height, Bohler angle, and AOFAS Ankle-Hindfoot scores (all P <0.001). No significant differences were shown in calcaneal length and Gissane angle (P >0.05). No wound-related complications occurred in either group.

CONCLUSION

The 3D-printed cast assisted screw fixation has shown superiority over minimally invasive plate fixation in the operative duration, fluoroscopic exposure, morphological restoration of the calcaneus, and functional outcomes in the treatment of DIACFs.

Sensitivity of Model-Based Predictions of Post-TKA Kinematic Behavior to Residual Errors in Ultrasound-Based Knee Collateral Ligament Strain Assessment

Ultrasound-based ligament strain estimation shows promise in non-invasively assessing knee joint collateral ligament behavior and improving ligament balancing procedures. However, the impact of ultrasound-based strain estimation residual errors on in-silico arthroplasty predictions remains unexplored. We investigated the sensitivity of post-arthroplasty kinematic predictions to ultrasound-based strain estimation errors compared to clinical inaccuracies in implant positioning.Two cadaveric legs were submitted to active squatting, and specimen-specific rigid computer models were formulated. Mechanical properties of the ligament model were optimized to reproduce experimentally obtained tibiofemoral kinematics and loads with minimal error. Resulting remaining errors were comparable to the current state-of-the-art. Ultrasound-derived strain residual errors were then introduced by perturbing lateral collateral ligament (LCL) and medial collateral ligament (MCL) stiffness. Afterwards, the implant position was perturbed to match with the current clinical inaccuracies reported in the literature. Finally, the impact on simulated post-arthroplasty tibiofemoral kinematics was compared for both perturbation scenarios. Ultrasound-based errors minimally affected kinematic outcomes (mean differences < 0.73° in rotations, 0.1 mm in translations). Greatest differences occurred in external tibial rotations (-0.61° to 0.73° for MCL, -0.28° to 0.27° for LCL). Comparatively, changes in implant position had larger effects, with mean differences up to 1.95° in external tibial rotation and 0.7 mm in mediolateral translation. In conclusion, our study demonstrated that the ultrasound-based assessment of collateral ligament strains has the potential to enhance current computer-based pre-operative knee arthroplasty planning.

The effects of the functional garment on the biomechanics during the single leg drop landing

INTRODUCTION

A functional biomechanics garment (FBG) may help to prevent injury by improved kinematics during motion such as single leg drop landing (SLDL). The purpose of this study was to investigate the effects of the FBG on the biomechanics of SLDL.

METHOD

Seventeen female university basketball players participated. Characteristics of the FBG were designed based on biomechanics during weight-loaded performance of human movement. The average values of lower limb kinematics and kinetics in the sagittal and frontal planes from 3 SLDL with and without FBG were measured and compared.

RESULTS

The maximum varus angle of the knee showed a significant difference between the use of FBG (15.3 ± 15.1°) and without the use of FBG (5.9 ± 15.4°), the flexion angular displacement of the hip (with FBG, 21.5 ± 8.1°; without FBG, 24.0 ± 6.7°) between with and without FBG. The moment of the hip with FGB (1.1 ± 0.6 Nm) was significantly smaller than without FGB (1.4 ± 0.8 Nm).

DISCUSSION

Regarding function of the FBG, the rigid part of the hip could counter the excessive adduction and flexion of the hip, and the elastic part of the thigh could support the varus moment when the elastic part stretched. Therefore, the subjects with FBG could control the frontal motion of the knee, which has a risk of knee injury, such as the dynamic valgus of the knee during the SLDL.

CONCLUSION

Use of the FBG decreases dynamic knee valgus, which reduces risk of knee injury.

Comparative Biomechanical Analysis of Anterior Process Locking Plate Alone versus Combined with Percutaneous Cannulated Screw Fixation for Sanders Type II Calcaneal Fractures: A Finite Element Study

BACKGROUND Calcaneal fractures are the most common tarsal bone fractures, and account for 75% of intra-articular fractures. The purpose of this study was to compare the biomechanical stability of the anterior process locking plate combined with the percutaneous cannulated screw fixation (screw group) versus the anterior process locking plate fixation alone (plate group) for the treatment of Sanders type II calcaneal fractures using finite element analysis to provide a theoretical basis for clinical work. MATERIAL AND METHODS We established a 3D model of Sanders type II calcaneal fracture; assigned material properties to the internal fixation systems; applied loads; set up analysis criteria; analyzed the displacement of the fracture, relative displacement, stress state of bone tissue, and internal fixation; and compared mechanical stability. RESULTS For Sanders type II A, II B, and II C calcaneal fractures, the degree of displacement and relative displacement of the fracture in the screw group was less than that of the plate group. For all subtypes of Sanders type II calcaneal fractures, the screw group had better mechanical stability than the plate group. CONCLUSIONS Both fixation methods (screw and plate group) were within a reasonable range for restoring the levelling effect of the joint surface and maintaining the strength of fixation, and both had good mechanical stability. Finite element analysis is a relatively reliable method, and biomechanics and clinical studies must further verify the experimental results.

Comparison of sinus tarsi approach versus extensile lateral approach in the management of displaced intra-articular calcaneal fractures: A single-center study

BACKGROUND

Controversy still exists for optimal treatment for displaced intra-articular calcaneal fractures (DIACFs). Conven-tionally, the extensile lateral approach (ELA) has been the most preferred approach. Although ELA provides excellent fracture access and direct evaluation of the depressed posterior facet, this approach has a high rate of serious complications, such as hematoma, superficial/deep infection, and wound healing issues. To overcome such complications, more minimally invasive techniques including external fixation, percutaneous fixation, arthroscopic assisted fixation, and sinus tarsi approach (STA) have been recently described. The primary aim of this study was to compare STA and LEA in the treatment of DIACFs.

METHODS

Patients who were operated for DIACFs in our clinic were included in the study. Patients with closed DIACFs of Sanders Type II, III, IV, and over 18 years of age were identified. Physical examinations and radiological evaluations of the patients were per-formed, and clinical scores were filled. Patients were divided into subgroups according to the Sander's classification and comparisons were made again according to these subgroups.

RESULTS

There were 37 patients (four female and 33 male) in STA group and 44 patients in LEA group (six female and 38 male). The mean age was 44.42±13.57 years (range, 18-61) for STA group and 37.32±11.09 years (range, 18-56) for the LEA group. In clinical outcomes, except for short-form survey (SF-12)/MCS-12 (Mental Score) and visual analog scale score, all the parameters were signifi-cantly better in STA group compared to LEA group. No significant difference was observed between the two groups in radiographic results, except for the Böhler angle. Significantly less infection occurred in the STA group compared to LEA group (P=0.021). According to Sander's classification, American Orthopedic Foot and Ankle Society, foot and ankle disability index, and SF-12/PCS-12 and foot function index scores, no significant differences were determined between STA and LEA groups for Sanders Type 2, whereas the values were considerably higher in STA group than in LEA group for Sanders Type 3 and 4.

CONCLUSION

In DIACFs, STA is considered a safe and effective method for restoring the width, height, and length of the calca-neus and reconstruction of joint alignment and has now become our standard technique for all calcaneal fractures requiring operative treatment.

Standardized multi-planar reformation improves the reliability of the assessment of the anterolateral ligament in ACL-deficient knees

PURPOSE

The anterolateral ligament (ALL) is an important structure for controlling anterolateral rotatory stability of the knee. Its assessment, however, is difficult using standardized MRI images. The goal of this study was to assess the reliability of judging the integrity of the ALL on multi-planar reformatted (MPR) MRI images and on standard coronal reformatted (SCR) MRI images in knees with an anterior cruciate ligament (ACL) rupture.

METHODS

Forty-eight patients (14 females, 34 males, 30 ± 6 years (mean age ± standard deviation)) with acute ACL ruptures (< 2 weeks) and no additional knee injuries (except segond fractures) were included. Images were assessed by two independent raters twice with at least a 2-week interval in between. The assessment was first performed on SCR images and thereafter on MPR images. Images were judged for assessability of the ALL and then the integrity of the ALL was rated.

RESULTS

Depending on rater and read, the ALL was judged as "torn" in between 5 (10.4%) and 11 (22.9%) patients out of 48 patients on SCR images. On MRP images, the ALL was judged as "torn" in between 5 (10.4%) and 6 (12.5%) patients out of 48 patients, depending on rater and read. Inter- and intra-rater reliability for the assessment of the ALL using MPR images was "substantial" to "almost perfect". Inter- and intra-rater reliability for the assessment using SCR was "fair" to "substantial".

CONCLUSION

MPR images should be used when assessing the integrity of the ALL. Assessment quality is independent of patient positioning during MRI acquisition and the ALL can be displayed in full length on one image.

LEVEL OF EVIDENCE

Level III.