Pyrolysis kinetic behaviour and TG-FTIR-GC-MS analysis of Coronavirus Face Masks

Influence of metal oxide catalyst on co-pyrolysis of biomass and COVID-19 waste

The disposal of waste generated by the COVID-19 pandemic is still a challenge to the government in most countries. The present study shines its light on the catalytic effect of metal oxide on converting COVID-19 waste i.e. used face masks into valuable products through co-pyrolysis. The co-pyrolysis trial was carried out for a mixture of waste face mask (WFM) and Moringa oleifera (MO) biomass at a constant temperature of 450°C for 15 min of resident time. This investigation focuses on studying the catalytic effect of calcium oxide (CaO) on the by-products of the pyrolysis process. From the FT-IR studies, it is observed that the CaO catalyst assisted to reduce oxygen as well as sulphur and carboxylic acids in the bio-oil due to its strong basic nature. The FE-SEM images suggest the increase in porous structure with catalytic pyrolysis (CP) char compared to non-catalytic pyrolysis (NCP) char. The catalytic activity of CaO increased the alcoholic content with a reduction in aldehydes and ketones in the bio-oil. The addition of WFM to the biomass with CaO catalyst pyrolysis (CP) delivered a higher oil yield of 52% compared to non-catalytic pyrolysis (NCP).

Towards environmentally sustainable management: A review on the generation, degradation, and recycling of polypropylene face mask waste

There has been a considerable increase in the use of face masks in the past years. Managing face mask waste has become a global concern, as the current waste management system is insufficient to deal with such a large quantity of solid waste. The drastic increase in quantity, along with the material's inability to degrade plastic components such as polypropylene, has led to a large accumulation of plastic waste, causing a series of environmental and ecological challenges. In addition, the growing use also imposes pressure on waste management methods such as landfill and incineration, raising concerns about high energy consumption, low value-added utilization, and the release of additional pollutants during the process. This article initially reviews the impact of mask-related plastic waste generation and degradation behavior in the natural environment. It then provides an overview of various recently developed methods for recycling face mask plastic waste. The article also offers forward-looking strategies and recommendations on face mask plastic waste management. The review aims to provide guidance on harnessing the complexities of mask waste and other medical plastic pollution issues, as well as improving the current waste management system's deficiencies and inefficiencies in tackling the growing plastic waste problem.

Pyrolysis Kinetic Behavior and Thermodynamic Analysis of PET Nonwoven Fabric

This research aims to maximize polyethylene terephthalate (PET) nonwoven fabric waste and make it as a new source for benzoic acid extraction using a pyrolysis process. The treatment was performed using a thermogravimetric analyzer (TGA) and released products were characterized using FTIR spectroscopy and gas chromatography-mass spectrometry (GC-MS). The pyrolysis kinetic and thermodynamic behavior of PET fabric was also studied and simulated using different linear and nonlinear models. The results show that the PET fabric is very rich in volatile matter (80 wt.%) and can completely degrade under 490 °C with a weight loss of 84%. Meanwhile, the generated vapor was rich in the carbonylic C=O functional group (FTIR), and the GC-MS analysis concluded that benzoic acid was the major compound with an abundance of 75% that was achieved at the lowest heating rate (5 °C/min). The linear kinetic results showed that PET samples had an activation energy in the ranges of 193-256 kJ/mol (linear models) and ~161 kJ/mol (nonlinear models). The thermodynamic parameters, including enthalpy, Gibbs free energy, and entropy, were estimated in the ranges of 149-250 kJ/mol, 153-232 kJ/mol, and 256-356 J/mol K, respectively. Accordingly, pyrolysis treatment can be used to extract benzoic acid from PET fabric waste with a 134% increase in the benzoic acid abundance that can be recovered from PET bottle plastic waste.

Co-pyrolysis of medical protective clothing and oil palm wastes for biofuel: Experimental, techno-economic, and environmental analyses

The ongoing global pandemic of COVID-19 has devastatingly influenced the environment, society, and economy around the world. Numerous medical resources are used to inhibit the infectious transmission of the virus, resulting in massive medical waste. This study proposes a sustainable and environment-friendly method to convert hazardous medical waste into valuable fuel products through pyrolysis. Medical protective clothing (MPC), a typical medical waste from COVID-19, was utilized for co-pyrolysis with oil palm wastes (OPWs). The utilization of MPC improved the bio-oil properties in OPWs pyrolysis. The addition of catalysts further ameliorated the bio-oil quality. HZSM-5 was more effective in producing hydrocarbons in bio-oil, and the relevant reaction pathway was proposed. Meanwhile, a project was simulated to co-produce bio-oil and electricity from the co-pyrolysis of OPWs and MPC from application perspectives. The techno-economic analysis indicated that the project was economically feasible, and the payback period was 6.30-8.75 years. Moreover, it was also environmentally benign as its global warming potential varied from -211.13 to -90.76 kg CO₂-eq/t. Therefore, converting MPC and OPWs into biofuel and electricity through co-pyrolysis is a green, economic, and sustainable method that can decrease waste, produce valuable fuel products, and achieve remarkable economic and environmental benefits.

Resource recovery from discarded COVID-19 PPE kit through catalytic fast pyrolysis

During the COVID-19 pandemic, the world saw an exponential surge in the production of Personal Protective Equipment (PPE) kits, which eventually got discarded in the biomedical waste stream. In this study, thirteen different polymer samples from the PPE kit were collected and characterized using Fourier transform infrared spectrometer, thermogravimetric analysis, and analytical pyrolysis-gas chromatograph/mass spectrometry. The characterization data showed that about 94 % by mass of components were made of only three polymers, viz. polypropylene (PP, 75.6 wt %), polyethylene terephthalate (PET, 12.5 wt %), and polycarbonate (PC, 6 wt %). The analytical pyrolysis of the PPE coverall suit (PP) yielded mainly alkenes containing 2,4-dimethyl-1-heptene as the major compound with 17 wt % yield at 600 °C. The pyrolysates from face shield (PET) were rich in benzoic acid (5.8 wt %) and acetophenone (4.8 wt %), while those from safety goggles (PC) were rich in phenol (17.6 wt %) and p-cresol (12.4 wt %) at 600 °C. HZSM-5 and HY zeolites were used for the catalytic upgradation of pyrolysates especially from PP, PET and PC. The temperature and feed-to-catalyst ratio were optimized by performing catalytic fast pyrolysis experiments at 500 °C, 600 °C and 700 °C with different feed-to-catalyst ratios 1:2, 1:4, and 1:6 (w/w). The yield of aromatic hydrocarbons, viz., BTEX (benzene, toluene, ethylbenzene, xylenes) and naphthalene, was maximum (∼25.7 wt %) from PP coverall when HY catalyst was used at 600 °C and 1:6 (w/w) loading. In the case of PET face shield, the total yield of BTEX, naphthalene and biphenyl was maximum (27.9 wt %) at 600 °C and 1:4 (w/w) of HZSM-5, while in the case of PC goggles, it was maximum (18.6 wt %) at 700 °C and 1:4 (w/w) of HY. This study shows that the entire PPE kit can be valorized via catalytic fast pyrolysis to generate petrochemical products and platform molecules like monoaromatic hydrocarbons at high selectivities.

Thermal degradation model of used surgical masks based on machine learning methodology

Background

The COVID-19 pandemic has leveraged facial masks to be one of the most effective measures to prevent the spread of the virus, which thereby has exponentially increased the usage of facial masks that lead to medical waste mismanagements which pose a serious threat to life. Thermal degradation or pyrolysis is an effective treatment method for the used facial mask wastes and this study aims to investigate the thermal degradation of the same.

Methods

Predicted the TGA experimental curves of the mask components using a Machine Learning model known as Artificial Neural Network (ANN).

Significant findings

Three different parts of the mask namely- ribbon, body, and corner were separated and used for the analysis. The thermal degradation behavior is studied using Thermogravimetric Analysis (TGA) and this is crucial for determining the reactivity of the individual mask components as they are subjected to a range of temperatures. Using the curves obtained from TGA, kinetic parameters such as Activation energy (E) and Pre-exponential factor (A) were estimated using the Coats-Redfern model-fitting method. Using the determined kinetic parameters, thermodynamic quantities such as a change in Enthalpy (ΔH), Entropy (ΔS), and Gibbs-Free energy (ΔG) were also calculated. Since TGA is a costly and time-consuming process, this study attempted to predict the TGA experimental curves of the mask components using a Machine Learning model known as Artificial Neural Network (ANN). The dataset obtained at a heating rate of 10°C/min was used to train the 3 different neural networks corresponding to the mask components and it showed an excellent agreement with experimental data (R² > 0.99). Through this study, a complex chemical process such as thermal degradation was modelled using Machine Learning based on available experimental parameters without delving into the intricacies and complexities of the process.

Masks thermal degradation as an alternative of waste valorization on the COVID-19 pandemic: A kinetic study

The COVID-19 pandemic generated a new dynamic around waste management. Personal protective equipment such as masks, gloves, and face shields were essential to prevent the spread of the disease. However, despite the increase in waste, no technical alternatives were foreseen for the recovery of these wastes, which are made up of materials that can be valued for energy recovery. It is essential to design processes such as waste to energy to promote the circular economy. Therefore, techniques such as pyrolysis and thermal oxidative decomposition of waste materials need to be studied and scaled up, for which kinetic models and thermodynamic parameters are required to allow the design of this reaction equipment. This work develops kinetic models of the thermal degradation process by pyrolysis as an alternative for energy recovery of used masks generated by the COVID-19 pandemic. The wasted masks were isolated for 72 h for virus inactivation and characterized by FTIR-ATR spectroscopy, elemental analysis, and determinate the higher calorific value (HCV). The composition of the wasted masks included polypropylene, polyethylene terephthalate, nylon, and spandex, with higher calorific values than traditional fuels. For this reason, they are susceptible to value as an energetic material. Thermal degradation was performed by thermogravimetric analysis at different heating rates in N₂ atmosphere. The gases produced were characterized by gas chromatography and mass spectrometry. The kinetic model was based on the mass loss of the masks on the thermal degradation, then calculated activation energies, reaction orders, pre-exponential factors, and thermodynamic parameters. Kinetics models such as Coats and Redfern, Horowitz and Metzger, Kissinger-Akahira-Sunose were studied to find the best-fit models between the experimental and calculated data. The kinetic and thermodynamic parameters of the thermal degradation processes demonstrated the feasibility and high potential of recovery of these residues with conversions higher than 89.26% and obtaining long-chain branched hydrocarbons, cyclic hydrocarbons, and CO₂ as products.

Thermal degradation of hazardous 3-layered COVID-19 face mask through pyrolysis: Kinetic, thermodynamic, prediction modelling using ANN and volatile product characterization

Nowadays, wearing a 3-layered face mask (3LFM) to protect against coronavirus illness (COVID-19) has become commonplace, resulting in massive, hazardous solid waste. Since most of them are infected with viruses, a secure way of disposal is necessary to prevent further virus spread. Pyrolysis treatment has recently developed as an effective method for disposing of such hazardous waste and consequently converting them into energy products. In this regard, the goal of the present study is to physicochemically characterize the 3LFM followed by pyrolysis in a TGA to evaluate the pyrolysis performance, kinetic, and thermodynamic parameters and in a semi-batch reactor to characterize the volatile product. Furthermore, an artificial neural network (ANN) was used to forecast thermal deterioration data. The results demonstrated a strong correlation between real and anticipated values. The study proved the relevance of the ANN model and the applicability of pyrolysis for disposing of 3LFM while simultaneously producing energy products.

Agro-residual biomass and disposable protective face mask: a merger for converting waste to plastic-fiber fuel via an integrative carbonization-pelletization framework

Incineration and landfilling offer possibilities for addressing high-rate management of COVID-waste streams. However, they can be costly and environmentally unsustainable. In addition, they do not allow to convert them to fuels and chemicals as waste-to-energy and waste-to-product technologies. Therefore, we analyzed whether integrating hydrothermal carbonization (HTC) and pelletization can allow converting the surgical face mask (SFM) and biomass to composite plastic-fiber fuel (CPFF). We blended the plastic material and corncob, peanut shell, or sugarcane bagasse at the proportion of 50:50 (%, dry mass basis) for HTC. We performed the thermal pretreatment of blends in an autoclaving reactor at 180 °C and 1.5 MPa. Then we pelletized the hydrochars in a presser machine at 200 MPa and 125 °C. By analyzing the evidence from our study, we recognized the viability of combining the SFM and agricultural residues for CPFF from comparable technical features of our products to standards for premium-grade wood pellets. For instance, the elemental composition of their low-meltable ash was not stoichiometrically sufficient to severely produce slagging and fouling in the equipment for thermal conversion. Although they contained synthetic polymers in their structures, such as polyethylene from filter layers and nylon from the earloop, they emitted CO and NOx below the critical limits of 200 and 500 mg m-3, respectively, for occupational safety. Therefore, we extended the knowledge on waste-to-energy pathways to transform SFM into high-quality hybrid fuel by carbonization and pelletization. Our framework can provide stakeholders opportunities to address plastic and biogenic waste in the context of a circular economy.

Supplementary Information

The online version contains supplementary material available at 10.1007/s13399-022-03285-4.

Effects of the COVID-19 pandemic on the environment, waste management, and energy sectors: a deeper look into the long-term impacts

The COVID-19 pandemic not only has caused a global health crisis but also has significant environmental consequences. Although many studies are confirming the short-term improvements in air quality in several countries across the world, the long-term negative consequences outweigh all the claimed positive impacts. As a result, this review highlights the positive and the long-term negative environmental effects of the COVID-19 pandemic by evaluating the scientific literature. Remarkable reduction in the levels of CO (3 - 65%), NO₂ (17 - 83%), NO_x (24 - 47%), PM_2.5 (22 - 78%), PM₁₀ (23 - 80%), and VOCs (25 - 57%) was observed during the lockdown across the world. However, according to this review, the pandemic put enormous strain on the present waste collection and treatment system, resulting in ineffective waste management practices, damaging the environment. The extensive usage of face masks increased the release of microplastics/nanoplastics (183 to 1247 particles piece^-1) and organic pollutants in land and water bodies. Furthermore, the significant usages of anti-bacterial hand sanitizers, disinfectants, and pharmaceuticals have increased the accumulation of various toxic emerging contaminants (e.g., triclocarban, triclosan, bisphenol-A, hydroxychloroquine) in the treated sludge/biosolids and discharged wastewater effluent, posing great threats to the ecosystems. This review also suggests strategies to create long-term environmental advantages. Thermochemical conversions of solid wastes including medical wastes and for treated wastewater sludge/biosolids offer several advantages through recovering the resources and energy and stabilizing/destructing the toxins/contaminants and microplastics in the precursors.

Pyrolysis of COVID-19 disposable masks and catalytic cracking of the volatiles

The disposable masks generated in the battle against COVID-19 has attracted wide attention in the world. Pyrolysis can convert the masks into useful chemicals and fuels. In this work, the masks are pyrolyzed at temperatures of 400-580 °C and the volatiles generated are cracked without or with catalysts at 440-580 °C. The catalysts used include metal oxides (Al₂O₃, kaolin, Fe₂O₃, CeO₂, TiO₂) and molecular sieves (HZSM5, HY, β(25H), β(60H)). The yields and composition of gas and liquid products are studied in detail where the tetrahydrofuran (THF) soluble compounds are defined as the liquid product and the n-hexane soluble compounds are defined as the oil. The liquid product and the oil were identified by GC-MS and quantified by GC. Results indicate that 440 °C is sufficient for the masks' pyrolysis and the yields of gas, liquid product and oil are 23.4, 74.7 and 42.1 wt%, respectively. About 30% of the liquid product are C₆-C₃₅ hydrocarbons while about 70% are C₃₆-C₇₀ hydrocarbons trapped in the GC column (termed as column residue). The gas products are mainly C₅, propylene and butene, accounting for 54.8%, 22.8% and 14.5% of the total gas product, respectively. Cracking of volatiles over various catalysts converts the liquid product mainly to propylene, butene and smaller organic gases. TiO₂, HY and β(60H) are good catalysts, especially β(60H), which increases the yield of gas product to 86.5 wt% with 73.0% being ethylene, propylene and butene at 580 °C.

Disposable tri-layer masks and microfiber pollution - An experimental analysis on dry and wet state emission

The use of masks as a personal protective material is the new normal in the post-pandemic. The higher use of masks triggers immediate disposal of synthetic textile fibers leading to environmental pollution. This research is aimed to analyse the level of mask-related pollution and its impact on microfiber release. Microfiber emission characteristics of the tri-layer nonwoven mask (Polypropylene-based disposable mask) are analysed in the dry and wet stages. The individual layers of the mask and the entire mask are evaluated by subjecting them to static immersion and mechanical agitation against freshwater and seawater in the wet stage. The results of the study showed a higher microfiber shedding at dry state (14,031.97-177,601.58 fibers/mask) than the wet state (2557.65-22,525.89 fibers/mask). The increased fuzz formation in the dry state than the wet state is noted as the main reason. In the case of wet state, when the freshwater and seawater are compared, both in a static and agitated state, seawater degraded the mask highly (3358.03-27,348.9 fibers/mask) than the freshwater (1757.26-17,702.86 fibers/mask). Higher salinity and density of the seawater were noted as influencing parameters over the freshwater. When the results of naturally weathered masks are compared with the new mask, weathered masks released significantly (p < 0.05) higher amount of fibers at the evaluation stages. Similar to the new masks, the weathered masks also showed a higher amount of shedding in the dry state and presence of seawater. When the individual layers of the disposable masks were evaluated, at dry and wet states, all the layers showed a similar shedding (no significant difference between individual layers) in the case of a new mask. Whereas, after weathering, a significant amount of higher shedding (p < 0.05) is noted in the middle layer of the mask followed by the outer and inner layer. The difference in fiber composition is noted as the main reason for the strength difference of the nonwoven structure. Statistical analysis confirmed the significant impact of the natural weathering process and seawater on the microfiber shedding.

Plastic Waste Management towards Energy Recovery during the COVID-19 Pandemic: The Example of Protective Face Mask Pyrolysis

This paper presents an assessment of the impact of the COVID-19 pandemic on the waste management sector, and then, based on laboratory tests and computer calculations, indicates how to effectively manage selected waste generated during the pandemic. Elemental compositions—namely, C, H, N, S, Cl, and O—were determined as part of the laboratory tests, and the pyrolysis processes of the above wastes were analysed using the TGA technique. The calculations were performed for a pilot pyrolysis reactor with a continuous flow of 240 kg/h in the temperature range of 400–900 °C. The implemented calculation model was experimentally verified for the conditions of the refuse-derived fuel (RDF) pyrolysis process. As a result of the laboratory tests and computer simulations, comprehensive knowledge was obtained about the pyrolysis of protective masks, with particular emphasis on the gaseous products of this process. The high calorific value of the pyrolysis gas, amounting to approx. 47.7 MJ/m3, encourages the management of plastic waste towards energy recovery. The proposed approach may be helpful in the initial assessment of the possibility of using energy from waste, depending on its elemental composition, as well as in the assessment of the environmental effects.

Biochar-advanced thermocatalytic salvaging of the waste disposable mask with the production of hydrogen and mono-aromatic hydrocarbons

The salvaging of the waste disposable mask was conducted in this study through catalytic pyrolysis over corn stover derived biochar catalyst combined with the boosted generation of hydrogen and mono-aromatic hydrocarbons for the first time. In the absence of biochar, up to 53 wt% of wax was observed at 550 ºC, whereas at the biochar/mask ratio of 2, around 41 wt% of liquid oil was produced without the formation of wax. The hydrogen content in the gas stream was about 26 vol% at 600 ºC for non-catalytic pyrolysis, which increased to around 55 vol% at the expense of light hydrocarbons such as methane and C_2-4 for the catalytic process with the biochar/mask ratio of 3. In resulting liquid oil, the content of mono-aromatics, especially toluene, xylenes, and ethylbenzene was about 55% for catalytic runs, which was far greater than that of 38% from the non-catalytic run. Interestingly, the dyes released from mask pyrolysis could be completely captured/adsorbed by biochar, leading to a much cleaner oil. After 10 cycles of reuse at 600 ºC without regeneration, the biochar still held a good selectivity toward hydrogen and mono-aromatic hydrocarbons. This study exemplified a readily accessible concept and pathway of 'waste against waste' targeted to upcycle waste disposable masks over biochar from biomass waste.

Waste surgical masks to fuels via thermochemical co-processing with waste motor oil and biomass

In this work, the co-processing of waste surgical masks, waste motor oil, and biomass was investigated to reduce the environmental impacts of the increasing medical-derived plastic pollution as well as to elucidate its effect on the production of chemicals . The results showed high yields towards an oily product with an interesting hydrocarbon content in the diesel range. Furthermore, although the initial waste motor oil had a high sulfur content, the oily products showed a low sulfur content, that was logically distributed in the solid and gas phases. In addition, all oily products presented HHVs ​​higher than 44 MJ/Kg, with cetane indices, densities, and viscosities lower than those of petroleum-derived diesel. This work could impact on the management of waste surgical masks and the joint recovery of everyday waste towards high value-added products.

Facemasks and ferrous metallurgy: improving gasification reactivity of low-volatile coals using waste COVID-19 facemasks for ironmaking application

The global pandemic response to COVID-19 has led to the generation of huge volumes of unrecyclable plastic waste from single use disposable face coverings. Rotary hearth furnaces can be used to recover Zn and Fe from non-recyclable steelmaking by-product dusts, and waste plastic material such as facemasks could be utilized as a supplementary reductant for the rotary hearth furnace (RHF), but their fibrous form makes milling and processing to appropriate sizing for RHF application extremely challenging. A scalable method of grinding facemasks to powder by melting and mixing with Welsh coal dust reported herein provides a solution to both environmental challenges. The melt-blended PPE/coal dust shows a dramatically improved CO₂ gasification reactivity (E_a = 133-159 kJmol^-1) when compared to the untreated coal (E_a = 183-246 kJmol^-1), because of improved pore development in the coal during the pyrolysis stage of heating and the catalytic activity of the CaO based ash present in the facemask plastic. The results are promising for the application of waste facemasks in recycling steelmaking by-product dusts in rotary hearth furnaces and may also be suitable for direct injection to the blast furnace subject to further study.

Resource Resurgence from COVID-19 Waste via Pyrolysis: a Circular Economy Approach

Since the end of 2019, COVID-19 pandemic has affected 220 countries and currently majority of the world is facing the wrath of the second wave. One of the outcomes of the ongoing pandemic is the generation of huge amount of solid polymeric "COVID-waste" comprising medical waste, personal protective equipment (PPE) waste, packaging waste, and other household waste with potential infectious components residing on it. Thermochemical route is the preferred treatment and effective way of disposal of such infectious polymeric waste. Typically, incineration is employed to ensure complete destruction of the pathogens which is not a resource-efficient method. Pyrolysis is a sustainable alternative which can handle the present COVID-waste stream in short-term and long-term yielding valuable fuel and material products. Recently published literature in this avenue have clearly shown the versatility of this technology in efficiently handling both mono and mixed stream of polymers. Based on facts, we propose a resource resurgence framework that utilizes pyrolysis as the core conversion route for effectively handling COVID-waste streams. Our framework suggests how these plants can be operational and helpful in generation of revenue in post-pandemic times as well. We expect that the conscientious adoption of pyrolysis will certainly lead us towards a circular economy paradigm.

Pyrolysis Kinetic Behaviour of Glass Fibre-Reinforced Epoxy Resin Composites Using Linear and Nonlinear Isoconversional Methods

Due to the increasing demand for glass fibre-reinforced epoxy resin composites (GFRC), huge amounts of GFRC waste are produced annually in different sizes and shapes, which may affect its thermal and chemical decomposition using pyrolysis technology. In this context, this research aims to study the effect of mechanical pre-treatment on the pyrolysis behaviour of GFRC and its pyrolysis kinetic. The experiments were started with the fabrication of GFRC panels using the vacuum-assisted resin transfer method followed by crushing the prepared panels using ball milling, thus preparing the milled GFRC with uniform shape and size. The elemental, proximate, and morphology properties of the panels and milled GFRC were studied. The thermal and chemical decomposition of the milled GFRC was studied using thermogravimetric coupled with Fourier-transform infrared spectroscopy (TG-FTIR) at different heating rates. Meanwhile, the volatile products were examined using TG coupled with gas chromatography-mass spectrometry (GC-MS). The TG-FTIR and TG-GC-MS experiments were performed separately. Linear (Kissinger-Akahira-Sunose (KAS), Flynn-Wall-Ozawa (FWO), and Friedman) and nonlinear (Vyazovkin and Cai) isoconversional methods were used to determine the pyrolysis kinetic of the milled GFRC based on thermogravimetry and differential thermal gravimetry (TG/DTG). In addition, the TG/DTG data of the milled GFRC were fitting using the distributed activation energy model and the independent parallel reactions kinetic model. The TG results showed that GFRC can decompose in three stages, and the main decomposition is located in the range 256-500 °C. On the other hand, aromatic benzene and a C-H bond were the major functional groups in the released volatile components in FTIR spectra, while phenol (27%), phenol,4-(1-methylethyl) (40%), and p-isopropenylphenol (34%) were the major compounds in GC-MS analysis. Whereas, the kinetic results showed that both isoconversional methods can be used to determine activation energies, which were estimated 165 KJ/mol (KAS), 193 KJ/mol (FWO), 180 KJ/mol (Friedman), 177 KJ/mol (Vyazovkin), and 174 KJ/mol (Cai).