A continuous fiber distribution material model for human cervical tissue

Biomechanical Modeling of Cesarean Section Scars and Scar Defects

Uterine rupture is an intrinsically biomechanical process associated with high maternal and fetal mortality. A previous Cesarean section (C-section) is the main risk factor for uterine rupture in a subsequent pregnancy due to tissue failure at the scar region. Finite element modeling of the uterus and scar tissue presents a promising method to further understand and predict uterine ruptures. Using patient dimensions of an at-term uterus, a C-section scar was modeled with an applied intrauterine pressure to study how scars affect uterine stress. The scar positioning and uterine thickness were varied, and a defect was incorporated into the scar region. The modeled stress distributions confirmed clinical observations as the increased regions of stress due to scar positioning, thinning of the uterine walls, and the presence of a defect are consistent with clinical observations of features that increase the risk of uterine rupture.

Bioengineering and the cervix: The past, current, and future for addressing preterm birth

The uterine cervix plays two important but opposing roles during pregnancy - as a mechanical barrier that maintains the fetus for nine months and as a compliant structure that dilates to allow for the delivery of a baby. In some pregnancies, however, the cervix softens and dilates prematurely, leading to preterm birth. Bioengineers have addressed and continue to address the lack of reduction in preterm birth rates by developing novel technologies to diagnose, prevent, and understand premature cervical remodeling. This article highlights these existing and emerging technologies and concludes with open areas of research related to the cervix and preterm birth that bioengineers are currently well-positioned to address.

A finite porous-viscoelastic model capturing mechanical behavior of human cervix under multi-step spherical indentation

The cervix is a soft tissue exhibiting time-dependent behavior under mechanical loads. The cervix is a vital mechanical barrier to protect the growing fetus. The remodeling of the cervical tissue, characterized by an increase in time-dependent material properties, is necessary for a safe parturition. The failure of its mechanical function and accelerated tissue remodeling is hypothesized to lead to preterm birth, which is birth before 37 weeks of gestation. To understand the mechanism of the time-dependent behavior of the cervix under compressive states, we employ a porous-viscoelastic material model to describe a set of spherical indentation tests performed on nonpregnant and term pregnant tissue. A genetic algorithm-based inverse finite element analysis is used to fit the force-relaxation data by optimizing the material parameters, and the statistical analysis of the optimized material parameters is conducted on different sample groups. The force response is captured well using the porous-viscoelastic model. The indentation force-relaxation of the cervix is explained by the porous effects and the intrinsic viscoelastic properties of the extracellular matrix (ECM) microstructure. The hydraulic permeability obtained from the inverse finite element analysis agrees with the trend of the value directly measured previously by our group. The nonpregnant samples are found significantly more permeable than the pregnant samples. Within nonpregnant samples, the posterior internal os is found significantly less permeable than the anterior and posterior external os. The proposed model exhibits the superior capability to capture the force-relaxation response of the cervix under indentation, as compared to the conventional quasi-linear viscoelastic framework (range of r2 of the porous-viscoelastic model 0.88-0.98 vs. quasi-linear model: 0.67-0.89). As a constitutive model with a relatively simple form, the porous-viscoelastic framework has the potential to be used to understand disease mechanisms of premature cervical remodeling, model contact of the cervix with biomedical devices, and interpret force readings from novel in-vivo measurement tools such as an aspiration device.

On multiscale tension-compression asymmetry in skeletal muscle

Skeletal muscle tissue shows a clear asymmetry with regard to the passive stresses under tensile and compressive deformation, referred to as tension-compression asymmetry (TCA). The present study is the first one reporting on TCA at different length scales, associated with muscle tissue and muscle fibres, respectively. This allows for the first time the comparison of TCA between the tissue and one of its individual components, and thus to identify the length scale at which this phenomenon originates. Not only the passive stress-stretch characteristics were recorded, but also the volume changes during the axial tension and compression experiments. The study reveals clear differences in the characteristics of TCA between fibres and tissue. At tissue level TCA increases non-linearly with increasing deformation and the ratio of tensile to compressive stresses at the same magnitude of strain reaches a value of approximately 130 at 13.5% deformation. At fibre level instead it initially drops to a value of 6 and then rises again to a TCA of 14. At a deformation of 13.5%, the tensile stress is about 6 times higher. Thus, TCA is about 22 times more expressed at tissue than fibre scale. Moreover, the analysis of volume changes revealed little compressibility at tissue scale whereas at fibre level, especially under compressive stress, the volume decreases significantly. The data collected in this study suggests that the extracellular matrix has a distinct role in amplifying the TCA, and leads to more incompressible tissue behaviour. STATEMENT OF SIGNIFICANCE: This article analyses and compares for the first time the tension-compression asymmetry (TCA) displayed by skeletal muscle at tissue and fibre scale. In addition, the volume changes of tissue and fibre specimens with application of passive tensile and compressive loads are studied. The study identifies a key role of the extracellular matrix in establishing the mechanical response of skeletal muscle tissue: It contributes significantly to the passive stress, it is responsible for the major part of tissue-scale TCA and, most probably, prevents/balances the volume changes of muscle fibres during deformation. These new results thus shed light on the origin of TCA and provide new information to be used in microstructure-based approaches to model and simulate skeletal muscle tissue.

Second-Trimester Cervical Shear Wave Elastography Combined With Cervical Length for the Prediction of Spontaneous Preterm Birth

The goal of this study was to explore the value of shear wave elastography (SWE) combined with cervical length (CL) in the prediction of spontaneous preterm birth (sPTB) between 18 and 24 weeks of gestation. In this study, SWE was used to evaluate four regions of the cervix: the external and anterior lip (region A1), the external and posterior lip (region A2), the internal and anterior lip (region A3) and the internal and posterior lip (region A4). The cervical Young's modulus (YM) was compared between women who spontaneously delivered prematurely (<37 wk) and those who delivered full term. Finally, the predictive power of SWE was evaluated using receiver operating characteristic analysis. Overall, 773 patients were included in this study, of whom 60 (7.8%) had a sPTB. In the univariate analysis, prior sPTB, history of spontaneous abortion, history of cervical surgery, CL and YM at the anterior portion of both the internal and external os and the posterior portion of the internal os were associated with sPTB (p < 0.05). Multiple regression analyses were performed to develop the prediction probability for sPTB. YM and CL were independent predictors of sPTB in asymptomatic women, and the combination of YM and CL improved the ability to predict sPTB (area under the receiver operating characteristic curve = 0.98, 95% confidence interval: 0.97-0.99, p < 0.001). The interventions had relatively little impact on the outcome indicators measured. Cervical YM added to the CL may improve the predictive performance of second-trimester transvaginal ultrasound for sPTB.

A review of regulated self-organizing approaches for tissue regeneration

Tissue and organ regeneration is the dynamic process by which a population of cells rearranges into a specific form with specific functions. Traditional tissue regeneration utilizes tissue grafting, cell implantation, and structured scaffolds to achieve clinical efficacy. However, tissue grafting methods face a shortage of donor tissue, while cell implantation may involve leakage of the implanted cells without a supportive 3D matrix. Cell migration, proliferation, and differentiation in structured scaffolds may disorganize and frustrate the artificially pre-designed structures, and sometimes involve immunogenic reactions. To overcome this limitation, the self-organizing properties and innate regenerative capability of tissue/organism formation in the absence of guidance by structured scaffolds has been investigated. This review emphasizes the growing subfield of the regulated self-organizing approach for neotissue formation and describes advances in the subfield using diverse, cutting-edge, inter-disciplinarity technologies. We cohesively summarize the directed self-organization of cells in the micro-engineered cell-ECM system and 3D/4D cell printing. Mathematical modeling of cellular self-organization is also discussed for providing rational guidance to intractable problems in tissue regeneration. It is envisioned that future self-organization approaches integrating biomathematics, micro-nano engineering, and gene circuits developed from synthetic biology will continue to work in concert with self-organizing morphogenesis to enhance rational control during self-organizing in tissue and organ regeneration.

Extracellular Matrix Rigidity Modulates Human Cervical Smooth Muscle Contractility-New Insights into Premature Cervical Failure and Spontaneous Preterm Birth

Spontaneous preterm birth (sPTB), a major cause of infant morbidity and mortality, must involve premature cervical softening/dilation for a preterm vaginal delivery to occur. Yet, the mechanism behind premature cervical softening/dilation in humans remains unclear. We previously reported the non-pregnant human cervix contains considerably more cervical smooth muscle cells (CSMC) than historically appreciated and the CSMC organization resembles a sphincter. We hypothesize that premature cervical dilation leading to sPTB may be due to (1) an inherent CSMC contractility defect resulting in sphincter failure and/or (2) altered cervical extracellular matrix (ECM) rigidity which influences CSMC contractility. To test these hypotheses, we utilized immunohistochemistry to confirm this CSMC phenotype persists in the human pregnant cervix and then assessed in vitro arrays of contractility (F:G actin ratios, PDMS pillar arrays) using primary CSMC from pregnant women with and without premature cervical failure (PCF). We show that CSMC from pregnant women with PCF do not have an inherent CSMC contractility defect but that CSMC exhibit decreased contractility when exposed to soft ECM. Given this finding, we used UPLC-ESI-MS/MS to evaluate collagen cross-link profiles in the cervical tissue from non-pregnant women with and without PCF and found that women with PCF have decreased collagen cross-link maturity ratios, which correlates to softer cervical tissue. These findings suggest having soft cervical ECM may lead to decreased CSMC contractile tone and a predisposition to sphincter laxity that contributes to sPTB. Further studies are needed to explore the interaction between cervical ECM properties and CSMC cellular behavior when investigating the pathophysiology of sPTB.

3D Bioprinting a human iPSC-derived MSC-loaded scaffold for repair of the uterine endometrium

Common events in the clinic, such as uterine curettage or inflammation, may lead to irreversible endometrial damage, often resulting in infertility in women of childbearing age. Currently, tissue engineering has the potential to achieve tissue manipulation, regeneration, and growth, but personalization and precision remain challenges. The application of "3D cell printing" is more in line with the clinical requirements of tissue repair. In this study, a porous grid-type human induced pluripotent stem cell-derived mesenchymal stem cell (hiMSC)-loaded hydrogel scaffold was constructed using a 3D bioprinting device. The 3D-printed hydrogel scaffold provided a permissive in vitro living environment for hiMSCs and significantly increased the survival duration of transplanted hiMSCs when compared with hiMSCs administered locally in vivo. Using an endometrial injury model, we found that hiMSC transplantation can cause early host immune responses (the serological immune response continued for more than 1 month, and the local immune response continued for approximately 1 week). Compared with the sham group, although the regenerative endometrium failed to show full restoration of the normal structure and function of the lining, implantation of the 3D-printed hiMSC-loaded scaffold not only promoted the recovery of the endometrial histomorphology (endometrial tissue and gland regeneration) and the regeneration of endometrial cells (stromal cells and epithelial cells) and endothelial cells but also improved endometrial receptivity functional indicators, namely, pinopode formation and leukemia inhibitory factor and αvβ3 expression, which partly restored the embryo implantation and pregnancy maintenance functions of the injured endometrium. These indicators were significantly better in the 3D-printed hiMSC-loaded scaffold group than in the unrepaired (empty) group, the hiMSCs alone group and the 3D scaffold group, and the empty group showed the worst repair results. Our study confirm that the 3D-printed hiMSC-loaded hydrogel scaffold may be a promising material for endometrial repair.

Uterus Modeling from Cell to Organ Level: towards Better Understanding of Physiological Basis of Uterine Activity

The relatively limited understanding of the physiology of uterine activation prevents us from achieving optimal clinical outcomes for managing serious pregnancy disorders such as preterm birth or uterine dystocia. There is increasing awareness that multi-scale computational modeling of the uterus is a promising approach for providing a qualitative and quantitative description of uterine physiology. The overarching objective of such approach is to coalesce previously fragmentary information into a predictive and testable model of uterine activity that, in turn, informs the development of new diagnostic and therapeutic approaches to these pressing clinical problems. This article assesses current progress towards this goal. We summarize the electrophysiological basis of uterine activation as presently understood and review recent research approaches to uterine modeling at different scales from single cell to tissue, whole organ and organism with particular focus on transformative data in the last decade. We describe the positives and limitations of these approaches, thereby identifying key gaps in our knowledge on which to focus, in parallel, future computational and biological research efforts.

Anisotropic Material Characterization of Human Cervix Tissue Based on Indentation and Inverse Finite Element Analysis

The cervix is essential to a healthy pregnancy as it must bear the increasing load caused by the growing fetus. Preterm birth is suspected to be caused by the premature softening and mechanical failure of the cervix. The objective of this paper is to measure the anisotropic mechanical properties of human cervical tissue using indentation and video extensometry. The human cervix is a layered structure, where its thick stromal core contains preferentially aligned collagen fibers embedded in a soft ground substance. The fiber composite nature of the tissue provides resistance to the complex three-dimensional loading environment of pregnancy. In this work, we detail an indentation mechanical test to obtain the force and deformation response during loading which closely matches in vivo conditions. We postulate a constitutive material model to describe the equilibrium material behavior to ramp-hold indentation, and we use an inverse finite element method based on genetic algorithm (GA) optimization to determine best-fit material parameters. We report the material properties of human cervical slices taken at different anatomical locations from women of different obstetric backgrounds. In this cohort of patients, the anterior internal os (the area where the cervix meets the uterus) of the cervix is stiffer than the anterior external os (the area closest to the vagina). The anatomic anterior and posterior quadrants of cervical tissue are more anisotropic than the left and right quadrants. There is no significant difference in material properties between samples of different parities (number of pregnancies reaching viable gestation age).

Engineering and women's health: a slow start, but gaining momentum

While biomedical engineers have participated in research studies that focus on understanding aspects particular to women's health since the 1950s, the depth and breadth of the research have increased significantly in the last 15-20 years. It has been increasingly clear that engineers can lend important knowledge and analysis to address questions that are key to understanding physiology and pathophysiology related to women's health. This historical survey identifies some of the earliest contributions of engineers to exploring aspects of women's health, from the behaviour of key tissues, to issues of reproduction and breast cancer. In addition, some of the more recent work in each area is identified and areas deserving additional attention are described. The interdisciplinary nature of this area of engineering, along with the growing interest within the field of biomedical engineering, promise to bring exciting new discoveries and expand knowledge that will positively impact women's health in the near future.

Diffusion Tensor Imaging (DTI) of the Cesarean-Scarred Uterus in vivo at 3T: Comparison Study of DTI Parameters Between Nonpregnant and Pregnant Cases

BACKGROUND

Fiber architecture of the human uterus can be depicted in vivo using 3T MR-DTI (diffusion tensor imaging).

PURPOSE

To investigate the differences in fibrous structure and DTI-related parameters between nonpregnant and pregnant cases in vivo.

STUDY TYPE

Prospective case-control study.

SUBJECTS

Thirty-one subjects were divided into two groups; 18 nonpregnant volunteers with previous cesarean deliveries (Group 1) and 13 patients in early pregnancy also with previous cesarean section (Group 2).

FIELD STRENGTH/SEQUENCE

3T Ssh-EPI (single-shot echo planar imaging) fast sequence with b values of 0 and 600 s/mm² along 30 directions.

ASSESSMENT

Fiber density, fiber length, apparent diffusion coefficient (ADC) value, and the fractional anisotropy (FA) value measured in the mid-sagittal plane of the uterus were obtained from the outer myometrium (OM), junctional zone (JZ), and the cesarean section scar (CSS). Fiber architecture in vivo was depicted by 3D diffusion tensor tractography (DTT).

STATISTICAL TESTS

A t-test of independent sample or Wilcoxon rank sum test were used for comparison.

RESULTS

Pregnant scarred-uterus (Group 2) showed a decrease in fiber density, FA value, and an increase in fiber length, ADC value than the nonpregnant scarred-uterus (Group 1) on OM, JZ, and CSS. Among the above parameters between the two groups, for OM, significant differences were found in fiber density (P < 0.001), length (P = 0.0306), and ADC (P = 0.0039). For JZ, significant differences were found in fiber density (P = 0.0093), FA (P = 0.0002), and ADC (P < 0.001). The scar's fiber density (P = 0.0794), length (P = 0.6167), FA (P = 0.6305), and ADC value (P = 0.1865) showed no statistically significant difference during early pregnancy.

DATA CONCLUSION

Our results indicate considerable diffusional changes in uterine fiber architecture during pregnancy. The microenvironment of scar tissue appears to change little during early pregnancy.

LEVEL OF EVIDENCE

2 Technical Efficacy Stage: 2 J. Magn. Reson. Imaging 2020;51:124-130.

Biaxial biomechanical properties of the nonpregnant murine cervix and uterus

From a biomechanical perspective, female reproductive health is an understudied area of research. There is an incomplete understanding of the complex function and interaction between the cervix and uterus. This, in part, is due to the limited research into multiaxial biomechanical functions and geometry of these organs. Knowledge of the biomechanical function and interaction between these organs may elucidate etiologies of conditions such as preterm birth. Therefore, the objective of this study was to quantify the multiaxial biomechanical properties of the murine cervix and uterus using a biaxial testing set-up. To accomplish this, an inflation-extension testing protocol (n = 15) was leveraged to quantify biaxial biomechanical properties while preserving native matrix interactions and geometry. Ultrasound imaging and histology (n = 10) were performed to evaluate regional geometry and microstructure, respectively. Histological analysis identified a statistically significant greater collagen content and significantly smaller smooth muscle content in the cervix as compared to the uterus. No statistically significant differences in elastic fibers were identified. Analysis of bilinear fits revealed a significantly stiffer response from the circumferentially orientated ECM fibers compared to axially orientated fibers in both organs. Bilinear fits and a two-fiber family constitutive model showed that the cervix was significantly less distensible than the uterus. We submit that the regional biaxial information reported in this study aids in establishing an appropriate reference configuration for mathematical models of the uterine-cervical complex. Thus, may aid future work to elucidate the biomechanical mechanisms leading to cervical or uterine conditions.

Investigating the passive mechanical behaviour of skeletal muscle fibres: Micromechanical experiments and Bayesian hierarchical modelling

Characterisation of the skeletal muscle's passive properties is a challenging task since its structure is dominated by a highly complex and hierarchical arrangement of fibrous components at different scales. The present work focuses on the micromechanical characterisation of skeletal muscle fibres, which consist of myofibrils, by realising three different deformation states, namely, axial tension, axial compression, and transversal compression. To the best of the authors' knowledge, the present study provides a novel comprehensive data set representing of different deformation states. These data allow for a better understanding of muscle fibre load transfer mechanisms and can be used for meaningful modelling approaches. As the present study shows, axial tension and compression experiments reveal a strong tension-compression asymmetry at fibre level. In comparison to the tissue level, this asymmetric behaviour is more pronounced at the fibre scale, elucidating the load transfer mechanism in muscle tissue and aiding in the development of future modelling strategies. Further, a Bayesian hierarchical modelling approach was used to consider the experimental fluctuations in a parameter identification scheme, leading to more comprehensive parameter distributions that reflect the entire observed experimental uncertainty. STATEMENT OF SIGNIFICANCE: This article examines for the first time the mechanical properties of skeletal muscle fibres under axial tension, axial compression, and transversal compression, leading to a highly comprehensive data set. Moreover, a Bayesian hierarchical modelling concept is presented to identify model parameters in a broad way. The results of the deformation states allow a new and comprehensive understanding of muscle fibres' load transfer mechanisms; one example is the effect of tension-compression asymmetry. On the one hand, the results of this study contribute to the understanding of muscle mechanics and thus to the muscle's functional understanding during daily activity. On the other hand, they are relevant in the fields of skeletal muscle multiscale, constitutive modelling.

Quantitative Ultrasound Parameters Based on the Backscattered Echo Power Signal as Biomarkers of Cervical Remodeling: A Longitudinal Study in the Pregnant Rhesus Macaque

Clinical prediction and especially prevention of abnormal birth timing, particularly pre-term, is poor. The cervix plays a key role in birth timing; it first serves as a rigid barrier to protect the developing fetus, then becomes the pathway to delivery of that fetus. Imaging biomarkers to define this remodeling process could provide insights to improve prediction of birth timing and elucidate novel targets for preventive therapies. Quantitative ultrasound (QUS) approaches that appear promising for this purpose include shear wave speed (SWS) estimation to quantify softness, as well as parameters based on backscattered power, such as the mean backscattered power difference (mBSPD) and specific attenuation coefficient (SAC), to quantify the organization of tissue microstructure. Invasive studies in rodents demonstrated that as pregnancy advances, cervical microstructure disorganizes as tissue softness and compliance increase. Our non-invasive studies in pregnant women and rhesus macaques suggested that QUS can detect these microstructural changes in vivo. Our previous study in the same cohort showed a progressive decline in SWS during pregnancy, consistent with increasing tissue softness, and we hypothesized that backscatter parameters would also decrease, consistent with increasing microstructural disorganization. In this study, we analyzed the mBSPD and SAC in the cervices of rhesus macaques (n = 18). We found that both mBSPD and SAC decreased throughout pregnancy (p < 0.001 for both parameters) and that the former appears to be a more reliable biomarker. In summary, biomarkers that can characterize tissue microstructural organization are promising for comprehensive characterization of cervical remodeling in pregnancy.

Gestational age-related changes in shear wave speed of the uterine cervix in normal pregnancy at 12-35 weeks' gestation

Background This study aimed to analyze age-related changes in shear wave speed (SWS) of the normal uterine cervix. Methods We studied 362 women with a normal singleton pregnancy at 12-35 weeks' gestation. The SWS of the cervix was measured using transvaginal ultrasonography at the internal os region of the anterior cervix (IOA), posterior cervix (IOP) and cervical canal (IOC), and at the external os region of the anterior cervix (EOA), posterior cervix (EOP) and cervical canal (EOC). The following parameters were analyzed: (1) time trend of SWS of the individual sampling points, (2) comparison of SWS in the internal cervical region and SWS in the external cervical region, and (3) comparison of SWS between the internal and external cervical regions. Statistical analyses were performed using mixed-effects models. Results The SWS of IOP decreased in bilinear regression, with a critical change in the rate at 22 weeks, whereas the SWS of the remaining points decreased linearly. The estimated values of SWS of IOP at 84, 154 and 251 days were higher than those of IOA and IOC (P<0.001). The estimated values of SWS of IOP at 84 and 154 days were higher than those of EOP (P<0.001). Significant differences between IOP and EOP were shown until 244 days (P<0.05). The estimated value of SWS of IOC at 84 days was higher than that of EOC (P<0.001). Significant differences between IOC and EOC were shown until 210 days (P<0.05). Conclusion The SWS of the uterine cervix in pregnancy decreases with advancing gestation. The SWS of IOP had the highest value among the sampling points with unique characteristics.

High-speed collagen fiber modeling and orientation quantification for optical coherence tomography imaging

Quantifying collagen fiber architecture has clinical and scientific relevance across a variety of tissue types and adds functionality to otherwise largely qualitative imaging modalities. Optical coherence tomography (OCT) is uniquely suited for this task due to its ability to capture the collagen microstructure over larger fields of view than traditional microscopy. Existing image processing techniques for quantifying fiber architecture, while accurate and effective, are very slow for processing large datasets and tend to lack structural specificity. We describe here a computationally efficient method for quantifying and visualizing collagen fiber organization. The algorithm is demonstrated on swine atria, bovine anterior cruciate ligament, and human cervical tissue samples. Additionally, we show an improved performance for images with crimped fiber textures and low signal to noise when compared to similar methods.

Characterization of the collagen microstructural organization of human cervical tissue

The cervix shortens and softens as its collagen microstructure remodels in preparation for birth. Altered cervical tissue collagen microstructure can contribute to a mechanically weak cervix and premature cervical dilation and delivery. To investigate the local microstructural changes associated with anatomic location and pregnancy, we used second-harmonic generation microscopy to quantify the orientation and spatial distribution of collagen throughout cervical tissue from 4 pregnant and 14 non-pregnant women. Across patients, the alignment and concentration of collagen within the cervix was more variable near the internal os and less variable near the external os. Across anatomic locations, the spatial distribution of collagen within a radial zone adjacent to the inner canal of the cervix was more homogeneous than that of a region comprising the middle and outer radial zones. Two regions with different collagen distribution characteristics were found. The anterior and posterior sections in the outer radial zone were characterized by greater spatial heterogeneity of collagen than that of the rest of the sections. Our findings suggest that the microstructural alignment and distribution of collagen varies with anatomic location within the human cervix. These observed differences in collagen microstructural alignment may reflect local anatomic differences in cervical mechanical loading and function. Our study deepens the understanding of specific microstructural cervical changes in pregnancy and informs investigations of potential mechanisms for normal and premature cervical remodeling.

Cervical alterations in pregnancy

Spontaneous preterm birth (SPTB), defined as delivery before 37 weeks' gestation, remains a significant obstetric dilemma even after decades of research in this field. Although trends from 2007 to 2014 showed the rate of preterm birth slightly decreased, the CDC recently reported the rate of preterm birth has increased for two consecutive years since 2014. Currently, 1 in 10 pregnancies in the US still end prematurely. In this chapter, we focus on the "compartment" of the cervix. The goal is to outline the current knowledge of normal cervical structure and function in pregnancy and the current knowledge of how the cervix malfunctions lead to SPTB. We review the mechanisms by which our current interventions are hypothesized to work. Finally, we outline gaps in knowledge and future research directions that may lead to novel and effective interventions to prevent premature cervical failure and SPTB.

Diffusion tensor imaging determines three-dimensional architecture of human cervix: a cross-sectional study

OBJECTIVE

To determine the microarchitecture of the cervix using high-resolution diffusion tensor (DT) magnetic resonance imaging (MRI).

DESIGN

Cross-sectional study.

SETTING

Leeds, UK.

SAMPLE

Women undergoing hysterectomy for benign pathology.

METHODS

Ex-vivo DT-MRI measurements were obtained using a 9.4-T Bruker nuclear magnetic resonance (NMR) spectrometer on seven fixed human cervices obtained at hysterectomy. A deterministic fibre-tracking algorithm was used to indirectly visualise underlying fibre organisation. Inter-regional differences in tissue structure were sought using quantitative measurements of diffusion.

MAIN OUTCOME MEASURE

The identification of an occlusive structure in the region corresponding to the internal cervical os.

RESULTS

Fibre tracking demonstrated two regions: an outer circular and inner longitudinal layer. The total circumferential tract volume (TV) was greatest in the proximal region of the cervix (TV: proximal, 271 ± 198 mm³ ; middle, 186 ± 119 mm³ ; distal, 38 ± 36 mm³ ). Fractional anisotropy (FA) and apparent diffusion coefficient (ADC) measurements were significantly different between regions in all samples (P < 0.0005), indicating greater tract density and organisation towards the internal os.

CONCLUSION

Fibre tracking infers a system of dense, well-defined, encircling fibres in the proximal region of the cervix, corresponding to the location of the internal os. These findings may provide evidence of specific anatomic microarchitecture within the cervix able to resist intrauterine forces associated with pregnancy.

TWEETABLE ABSTRACT

Diffusion-tensor MRI derived tractography identified well-defined encircling fibres at the internal os.

A Parameterized Ultrasound-Based Finite Element Analysis of the Mechanical Environment of Pregnancy

Preterm birth is the leading cause of childhood mortality and can lead to health risks in survivors. The mechanical functions of the uterus, fetal membranes, and cervix have dynamic roles to protect the fetus during gestation. To understand their mechanical function and relation to preterm birth, we built a three-dimensional parameterized finite element model of pregnancy. This model is generated by an automated procedure that is informed by maternal ultrasound measurements. A baseline model at 25 weeks of gestation was characterized, and to visualize the impact of cervical structural parameters on tissue stretch, we evaluated the model sensitivity to (1) anterior uterocervical angle, (2) cervical length, (3) posterior cervical offset, and (4) cervical stiffness. We found that cervical tissue stretching is minimal when the cervical canal is aligned with the longitudinal uterine axis, and a softer cervix is more sensitive to changes in the geometric variables tested.

The pathophysiology of human premature cervical remodeling resulting in spontaneous preterm birth: Where are we now?

Approximately one in ten (approximately 500,000) pregnancies results in preterm birth (PTB) annually in the United States. Although we have seen a slight decrease in the U.S. PTB rate between 2007 and 2014, data from 2014 to 2015 shows the preterm birth rate has slightly increased. It is even more intriguing to note that the rate of PTB has not significantly decreased since the 1980s. In order to decrease the rate of spontaneous preterm birth (sPTB), it is imperative that we improve our understanding of normal and abnormal reproductive tissue structure and function and how these tissues interact with each other at a cellular and biochemical level. Since other chapters in this issue will be focusing on the myometrium and fetal membranes, the goal of this chapter is to focus on the compartment of the cervix. We will review the current literature on normal and abnormal human cervical tissue remodeling and identify gaps in knowledge. Our goal is also to introduce a revised paradigm of normal cervical tissue structure and function which will provide novel research opportunities that may ultimately lead to developing safe and effective interventions to significantly decrease the rate and complications of prematurity.

Cellular Mechanics of Primary Human Cervical Fibroblasts: Influence of Progesterone and a Pro-inflammatory Cytokine

The leading cause of neonatal mortality, pre-term birth, is often caused by pre-mature ripening/opening of the uterine cervix. Although cervical fibroblasts play an important role in modulating the cervix's extracellular matrix (ECM) and mechanical properties, it is not known how hormones, i.e., progesterone, and pro-inflammatory insults alter fibroblast mechanics, fibroblast-ECM interactions and the resulting changes in tissue mechanics. Here we investigate how progesterone and a pro-inflammatory cytokine, IL-1β, alter the biomechanical properties of human cervical fibroblasts and the fibroblast-ECM interactions that govern tissue-scale mechanics. Primary human fibroblasts were isolated from non-pregnant cervix and treated with estrogen/progesterone, IL-1β or both. The resulting changes in ECM gene expression, matrix remodeling, traction force generation, cell-ECM adhesion and tissue contractility were monitored. Results indicate that IL-1β induces a significant reduction in traction force and ECM adhesion independent of pre-treatment with progesterone. These cell level effects altered tissue-scale mechanics where IL-1β inhibited the contraction of a collagen gel over 6 days. Interestingly, progesterone treatment alone did not modulate traction forces or gel contraction but did result in a dramatic increase in cell-ECM adhesion. Therefore, the protective effect of progesterone may be due to altered adhesion dynamics as opposed to altered ECM remodeling.

In vivo Raman spectral analysis of impaired cervical remodeling in a mouse model of delayed parturition

Monitoring cervical structure and composition during pregnancy has high potential for prediction of preterm birth (PTB), a problem affecting 15 million newborns annually. We use in vivo Raman spectroscopy, a label-free, light-based method that provides a molecular fingerprint to non-invasively investigate normal and impaired cervical remodeling. Prostaglandins stimulate uterine contractions and are clinically used for cervical ripening during pregnancy. Deletion of cyclooxygenase-1 (Cox-1), an enzyme involved in production of these prostaglandins, results in delayed parturition in mice. Contrary to expectation, Cox-1 null mice displayed normal uterine contractility; therefore, this study sought to determine whether cervical changes could explain the parturition differences in Cox-1 null mice and gestation-matched wild type (WT) controls. Raman spectral changes related to extracellular matrix proteins, lipids, and nucleic acids were tracked over pregnancy and found to be significantly delayed in Cox-1 null mice at term. A cervical basis for the parturition delay was confirmed by other ex vivo tests including decreased tissue distensibility, hydration, and elevated progesterone levels in the Cox-1 null mice at term. In conclusion, in vivo Raman spectroscopy non-invasively detected abnormal remodeling in the Cox-1 null mouse, and clearly demonstrated that the cervix plays a key role in their delayed parturition.

[Multiple Factors in the Second Trimester of Pregnancy on Preterm Labor Symptoms and Preterm Birth]

PURPOSE

The aim of this study was to determine the influence of various factors on preterm labor symptoms (PLS) and preterm birth (PB).

METHODS

This prospective cohort study included 193 women in the second stage of pregnancy. Multiple characteristics including body mass index (BMI), smoking, and pregnancy complications were collected through a self-report questionnaire. Pregnancy stress and PLS were each measured with a related scale. Cervical length and birth outcome were evaluated from medical charts. Multiple regression was used to predict PLS and logistic regression was used to predict PB.

RESULTS

Multiple regression showed smoking experience, pregnancy complications and pregnancy specific stress were predictors of PLS and accounted for 19.2% of the total variation. Logistic regression showed predictors of PB to be twins (OR=13.68, CI=3.72~50.33, p<.001), shorter cervix (<25mm) (OR=5.63, CI=1.29~24.54, p<.05), BMI >25 (kg/m²) (OR=3.50, CI=1.35~9.04, p<.01) and a previous PB (OR=4.15, CI=1.07~16.03, p<.05).

CONCLUSION

The results of this study show that the multiple factors affect stage II pregnant women can result in PLS or PB. And preterm labor may predict PB. These findings highlight differences in predicting variables for pretrm labor and for PB. Future research is needed to develop a screening tool to predict the risk of preterm birth in pregnant women.

Biomechanics of the human uterus

The appropriate biomechanical function of the uterus is required for the execution of human reproduction. These functions range from aiding the transport of the embryo to the implantation site, to remodeling its tissue walls to host the placenta, to protecting the fetus during gestation, to contracting forcefully for a safe parturition and postpartum, to remodeling back to its nonpregnant condition to renew the cycle of menstruation. To serve these remarkably diverse functions, the uterus is optimally geared with evolving and contractile muscle and tissue layers that are cued by chemical, hormonal, electrical, and mechanical signals. The relationship between these highly active biological signaling mechanisms and uterine biomechanical function is not completely understood for normal reproductive processes and pathological conditions such as adenomyosis, endometriosis, infertility and preterm labor. Animal studies have illuminated the rich structural function of the uterus, particularly in pregnancy. In humans, medical imaging techniques in ultrasound and magnetic resonance have been combined with computational engineering techniques to characterize the uterus in vivo, and advanced experimental techniques have explored uterine function using ex vivo tissue samples. The collective evidence presented in this review gives an overall perspective on uterine biomechanics related to both its nonpregnant and pregnant function, highlighting open research topics in the field. Additionally, uterine disease and infertility are discussed in the context of tissue injury and repair processes and the role of computational modeling in uncovering etiologies of disease. WIREs Syst Biol Med 2017, 9:e1388. doi: 10.1002/wsbm.1388 For further resources related to this article, please visit the WIREs website.

Collagen Fiber Orientation and Dispersion in the Upper Cervix of Non-Pregnant and Pregnant Women

The structural integrity of the cervix in pregnancy is necessary for carrying a pregnancy until term, and the organization of human cervical tissue collagen likely plays an important role in the tissue's structural function. Collagen fibers in the cervical extracellular matrix exhibit preferential directionality, and this collagen network ultrastructure is hypothesized to reorient and remodel during cervical softening and dilation at time of parturition. Within the cervix, the upper half is substantially loaded during pregnancy and is where the premature funneling starts to happen. To characterize the cervical collagen ultrastructure for the upper half of the human cervix, we imaged whole axial tissue slices from non-pregnant and pregnant women undergoing hysterectomy or cesarean hysterectomy respectively using optical coherence tomography (OCT) and implemented a pixel-wise fiber orientation tracking method to measure the distribution of fiber orientation. The collagen fiber orientation maps show that there are two radial zones and the preferential fiber direction is circumferential in a dominant outer radial zone. The OCT data also reveal that there are two anatomic regions with distinct fiber orientation and dispersion properties. These regions are labeled: Region 1-the posterior and anterior quadrants in the outer radial zone and Region 2-the left and right quadrants in the outer radial zone and all quadrants in the inner radial zone. When comparing samples from nulliparous vs multiparous women, no differences in these fiber properties were noted. Pregnant tissue samples exhibit an overall higher fiber dispersion and more heterogeneous fiber properties within the sample than non-pregnant tissue. Collectively, these OCT data suggest that collagen fiber dispersion and directionality may play a role in cervical remodeling during pregnancy, where distinct remodeling properties exist according to anatomical quadrant.

Myocardial imaging using ultrahigh-resolution spectral domain optical coherence tomography

We present an ultrahigh-resolution spectral domain optical coherence tomography (OCT) system in 800 nm with a low-noise supercontinuum source (SC) optimized for myocardial imaging. The system was demonstrated to have an axial resolution of 2.72  μm with a large imaging depth of 1.78 mm and a 6-dB falloff range of 0.89 mm. The lateral resolution (5.52  μm) was compromised to enhance the image penetration required for myocardial imaging. The noise of the SC source was analyzed extensively and an imaging protocol was proposed for SC-based OCT imaging with appreciable contrast. Three-dimensional datasets were acquired ex vivo on the endocardium side of tissue specimens from different chambers of fresh human and swine hearts. With the increased resolution and contrast, features such as elastic fibers, Purkinje fibers, and collagen fiber bundles were observed. The correlation between the structural information revealed in the OCT images and tissue pathology was discussed as well.

A debate about ultrasound and anatomic aspects of the cervix in spontaneous preterm birth

Preterm birth is the legal first global cause of neonatal death. The cervix has two roles: it has to stay closed to allow the fetus to undergo a normal development during gestation, and at term, the cervix has to dilate under the pressure of uterine contractions to allow the delivery. The purpose of this article is to establish if the ultrasound measured length of the cervix and its appearance are predictive for the spontaneous preterm birth. Cervical insufficiency can be described by painless cervical dilatation leading to pregnancy losses/ births, with no other risk factors present. During gestation, the physiological softening of the cervix is determined by the extracellular matrix components, particular decorin, and thrombospondin 2. The direction of the collagen fibers remains the same - circumferential direction, but the collagen solubility increases. Therefore, during pregnancy, the cervical tissue is more hydrated and has higher collagen extractability than non-pregnant tissue. Women with cervical incompetence have increased levels of smooth muscle cells than normal pregnant women, the number of elastic fibers is low, and also the concentration of hydroxyproline is decreased. Transvaginal ultrasound is the suitable gold standard exam that can offer essential information about the cervical length and state of the internal os in early asymptomatic stage of cervical insufficiency for predicting and preventing preterm birth. In our experience, a transvaginal ultrasound screening for the measurement of the cervix is required. We consider that the proper gestational age for the prediction of a preterm birth is at 18-22 weeks of gestation for the general population and earlier for patients with a history of preterm birth. Just from an observational point of view, we concluded with the fact that the cerclage of the cervix is unnecessary if the cervical length is above 2 cm and if the internal cervical os is closed. In the absence of funneling, the probability of cervical incompetence is low and the best prophylactic option is progesterone administration.

The mechanical role of the cervix in pregnancy

Appropriate mechanical function of the uterine cervix is critical for maintaining a pregnancy to term so that the fetus can develop fully. At the end of pregnancy, however, the cervix must allow delivery, which requires it to markedly soften, shorten and dilate. There are multiple pathways to spontaneous preterm birth, the leading global cause of death in children less than 5 years old, but all culminate in premature cervical change, because that is the last step in the final common pathway to delivery. The mechanisms underlying premature cervical change in pregnancy are poorly understood, and therefore current clinical protocols to assess preterm birth risk are limited to surrogate markers of mechanical function, such as sonographically measured cervical length. This is what motivates us to study the cervix, for which we propose investigating clinical cervical function in parallel with a quantitative engineering evaluation of its structural function. We aspire to develop a common translational language, as well as generate a rigorous integrated clinical-engineering framework for assessing cervical mechanical function at the cellular to organ level. In this review, we embark on that challenge by describing the current landscape of clinical, biochemical, and engineering concepts associated with the mechanical function of the cervix during pregnancy. Our goal is to use this common platform to inspire novel approaches to delineate normal and abnormal cervical function in pregnancy.

Investigating the mechanical function of the cervix during pregnancy using finite element models derived from high-resolution 3D MRI

Preterm birth is a strong contributor to perinatal mortality, and preterm infants that survive are at risk for long-term morbidities. During most of pregnancy, appropriate mechanical function of the cervix is required to maintain the developing fetus in utero. Premature cervical softening and subsequent cervical shortening are hypothesized to cause preterm birth. Presently, there is a lack of understanding of the structural and material factors that influence the mechanical function of the cervix during pregnancy. In this study we build finite element models of the pregnant uterus, cervix, and fetal membrane based on magnetic resonance imagining data in order to examine the mechanical function of the cervix under the physiologic loading conditions of pregnancy. We calculate the mechanical loading state of the cervix for two pregnant patients: 22 weeks gestational age with a normal cervical length and 28 weeks with a short cervix. We investigate the influence of (1) anatomical geometry, (2) cervical material properties, and (3) fetal membrane material properties, including its adhesion properties, on the mechanical loading state of the cervix under physiologically relevant intrauterine pressures. Our study demonstrates that membrane-uterus interaction, cervical material modeling, and membrane mechanical properties are factors that must be deliberately and carefully handled in order to construct a high quality mechanical simulation of pregnancy.

Analyzing three-dimensional ultrastructure of human cervical tissue using optical coherence tomography

During pregnancy, the uterine cervix is the mechanical barrier that prevents delivery of a fetus. The underlying cervical collagen ultrastructure, which influences the overall mechanical properties of the cervix, plays a role in maintaining a successful pregnancy until term. Yet, not much is known about this collagen ultrastructure in pregnant and nonpregnant human tissue. We used optical coherence tomography to investigate the directionality and dispersion of collagen fiber bundles in the human cervix. An image analysis tool has been developed, combining a stitching method with a fiber orientation measurement, to study axially sliced cervix samples. This tool was used to analyze the ultrastructure of ex-vivo pregnant and non-pregnant hysterectomy tissue samples taken at the internal os, which is the region of the cervix adjacent to the uterus. With this tool, directionality maps of collagen fiber bundles and dispersion of collagen fiber orientation were analyzed. It was found that that the overall preferred directionality of the collagen fibers for both the nonpregnant and pregnant samples were circling around the inner cervical canal. Pregnant samples showed greater dispersion than non-pregnant samples. Lastly, we observed regional differences in collagen fiber dispersion. Fibers closer to the inner canal showed more dispersion than the fibers on the radial edges.

Challenging the in-vivo assessment of biomechanical properties of the uterine cervix: A critical analysis of ultrasound based quasi-static procedures

Measuring the stiffness of the uterine cervix might be useful in the prediction of preterm delivery, a still unsolved health issue of global dimensions. Recently, a number of clinical studies have addressed this topic, proposing quantitative methods for the assessment of the mechanical properties of the cervix. Quasi-static elastography, maximum compressibility using ultrasound and aspiration tests have been applied for this purpose. The results obtained with the different methods seem to provide contradictory information about the physiologic development of cervical stiffness during pregnancy. Simulations and experiments were performed in order to rationalize the findings obtained with ultrasound based, quasi-static procedures. The experimental and computational results clearly illustrate that standardization of quasi-static elastography leads to repeatable strain values, but for different loading forces. Since force cannot be controlled, this current approach does not allow the distinction between a globally soft and stiff cervix. It is further shown that introducing a reference elastomer into the elastography measurement might overcome the problem of force standardization, but a careful mechanical analysis is required to obtain reliable stiffness values for cervical tissue. In contrast, the maximum compressibility procedure leads to a repeatable, semi-quantitative assessment of cervical consistency, due to the nonlinear nature of the mechanical behavior of cervical tissue. The evolution of cervical stiffness in pregnancy obtained with this procedure is in line with data from aspiration tests.