Fine-scale monitoring of shifts in microbial community composition after high organic loading in a pilot-scale membrane bioreactor

Microbially produced fertilizer provides rhizobacteria to hydroponic tomato roots by forming beneficial biofilms

Hydroponic cultivation of Solanum lycopersicum (tomato) is important, and high tomato production depends on the use of nitrogen and phosphate fertilizers. We had developed a microbial fertilizer (MF), which is mainly composed of nitrate. To investigate the effect of MF on plant growth, hydroponic tomato was grown with MF or commercial inorganic fertilizer (IF), and the microbiomes of the rhizosphere and the liquid phase were analyzed by confocal microscopy and high-throughput sequencing. Plant biomass and biofilm formation were increased by growth in MF compared to IF. The microbial community structures of tomato roots and hydroponic water differed between the two conditions, and three operational taxonomic units (OTUs) dominated in plants grown with MF. The three OTUs were related to Rudaea spp., Chitinophaga spp., and Stenotrophobacter terrae, which are reported to be disease-suppressive epiphytic or endophytic microbes of plant roots. Because these three OTUs also predominated in the MF itself, they were likely provided to the rhizosphere or endophytic environments of tomato roots via hydroponic water. KEY POINTS: • Microbial fertilizer for hydroponic growth enhanced biofilm formation on tomato root. • Microbial fertilizer contains tomato-root epiphytic or endophytic microbes. • Microbial fertilizer provided beneficial microbes to the rhizosphere and endophytic environments of tomato roots via hydroponic water.

Startup performance and microbial composition of a pilot-scale rapid sand filter for the treatment of manganese-containing mine water

The inexpensive removal of soluble manganese [Mn(II)] from mine water that contains large quantities of Mn(II) should be prioritized given that large quantities of alkaline reagents are typically used in the chemical treatment of Mn-rich water from abandoned mines. Rapid sand filter (RSF) systems are widely used as a cost-effective technology in drinking water treatment processes to remove iron and Mn from groundwater. Here, we applied a pilot-scale RSF to treat mine water with a neutral pH and containing approximately 22 mg/L of Mn(II). Following a lag phase from its startup (day 1-day 26), Mn removal rates increased to approximately 40% for around 1 month (day 27-day 55) without the use of alkaline reagents but did not increase during further operation. Quantitative elemental analysis revealed Mn oxides on the sand filters during the Mn removal period. The bacterial communities on the RSFs, recorded on day 42 and day 85, were characterized and compared using 16S rRNA gene amplicon sequencing. Although the well-known Mn-oxidizing bacteria (MOB) were not listed among the ten most dominant operational taxonomic units (OTUs) on the sand filters (relative abundances: >0.68%), a significant increase in the OTUs related to well-known alphaproteobacterial MOB, such as Pedomicrobium spp., were observed during the period.

Resource availability governs polyhydroxyalkanoate (PHA) accumulation and diversity of methanotrophic enrichments from wetlands

Aquatic environments account for half of global CH4 emissions, with freshwater wetlands being the most significant contributors. These CH4 fluxes can be partially offset by aerobic CH4 oxidation driven by methanotrophs. Additionally, some methanotrophs can convert CH4 into polyhydroxyalkanoate (PHA), an energy storage molecule as well as a promising bioplastic polymer. In this study, we investigate how PHA-accumulating methanotrophic communities enriched from wetlands were shaped by varying resource availability (i.e., C and N concentrations) at a fixed C/N ratio. Cell yields, PHA accumulation, and community composition were evaluated in high (20% CH4 and 10 mM NH4 +) and low resource (0.2% CH4 and 0.1 mM NH4 +) conditions simulating engineered and environmental settings, respectively. High resource availability decreased C-based cell yields, while N-based cell yields remained stable, suggesting nutrient exchange patterns differed between methanotrophic communities at different resource concentrations. PHA accumulation was only observed in high resource enrichments, producing approximately 12.6% ± 2.4% (m/m) PHA, while PHA in low resource enrichments remained below detection. High resource enrichments were dominated by Methylocystis methanotrophs, while low resource enrichments remained significantly more diverse and contained only a minor population of methanotrophs. This study demonstrates that resource concentration shapes PHA-accumulating methanotrophic communities. Together, this provides useful information to leverage such communities in engineering settings as well as to begin understanding their role in the environment.

In situ and self-adaptive BOD bioreaction sensing system based on environmentally domesticated microbial populations

Biochemical oxygen demand (BOD) is a water quality parameter of vital importance. Rapid BOD analysis methods have emerged to simplify the five-day BOD (BOD₅) measurement protocol. However, their universal implementations are restricted by the tricky environmental matrix (including environmental microbes, contaminants, ionic compositions, etc.). Here, an in situ and self-adaptive BOD bioreaction sensing system consisting of a "gut-like" microfluidic coil bioreactor with self-renewed biofilm was proposed for the establishment of a rapid, resilient and reliable BOD determination method. With the spontaneous surface adhesion of environmental microbial populations, the biofilm was colonized in situ on the inner surface of the microfluidic coil bioreactor. Exploiting the environmental domestication during every real sample measurement, the biofilm was capable of self-renewal to adapt to the environmental changes and exhibited representative biodegradation behaviors. The aggregated abundant, adequate and adapted microbial populations in the BOD bioreactor rendered a total organic carbon (TOC) removal rate of 67.7% within a short hydraulic retention time of 99 s. As validated by an online BOD prototype, exceptional analytical performance was achieved in terms of reproducibility (relative standard deviation of 3.7%), survivability (inhibition by pH and metal ion interference of <20%) and accuracy (relative error of -5.9% to 9.7%). This work rediscovered the interactive effects of the environmental matrix on BOD assays and demonstrated an instructive attempt by making use of the environment to develop practical online BOD monitoring devices for water quality assessments.

Deciphering biochar compost co-application impact on microbial communities mediating carbon and nitrogen transformation across different stages of corn development

Under current climatic conditions, developing eco-friendly and climate-smart fertilizers has become increasingly important.The co-application of biochar and compost on agricultural soils has received considerable attention recently.Unfortunately, little is known about its effects on specific microbial taxa involved in carbon and nitrogen transformation in the soil.Herein, we report the efficacy of applying biochar-based amendments on soil physicochemical indices, enzymatic activity, functional genes, bacterial community, and their network patterns in corn rhizosphere at seedling (SS), flowering (FS), and maturity (MS) stages.The applied treatments were: compost alone (COM), biochar alone (BIOC), composted biochar (CMB), fortified compost (CMWB), and the control (no fertilizer (CNTRL).The non-metric multidimensional scaling (NMDS) indicated total nitrogen (TN), pH, NO₃^--N, urease, protease, and microbial biomass C (MBC) as the dominant environmental factors driving soil bacteria in this study.The dominant N mediating genes belonged to nitrate reductase (narG) and nitronate monooxygenase (amo), while beta-galactosidase, catalase, and alpha-amylase were the dominant genes observed relating to C cycling.Interestingly, the abundance of these genes was higher in COM, CMWB, and CMB compared with the CNTRL and BIOC treatments.The bacteria network properties of CWMB and CMB indicated robust niche overlap associated with high cross-feeding between bacterial communities compared to other treatments.Path and stepwise regression analyses revealed norank_Reyranellaceae and Sphingopyxis in CMWB as the major bacterial genera and the major predictive indices mediating soil organic C (SOC), NH₄⁺-N, NO₃^--N, and TN transformation.Overall, biochar with compost amendments improved soil nutrient conditions, regulated the composition of the bacterial community, and benefited C/N cycling in the soil ecosystem.

Proposed approaches for coronaviruses elimination from wastewater: Membrane techniques and nanotechnology solutions

Since the beginning of the third Millennium, specifically during the last 18 years, three outbreaks of diseases have been recorded caused by coronaviruses (CoVs). The latest outbreak of these diseases was Coronavirus Disease 2019 (COVID-19), which has been declared by the World Health Organization (WHO) as a pandemic. For this reason, current efforts of the environmental, epidemiology scientists, engineers, and water sector professionals are ongoing to detect CoV in environmental components, especially water, and assess the relative risk of exposure to these systems and any measures needed to protect the public health, workers, and public, in general. This review presents a brief overview of CoV in water, wastewater, and surface water based on a literature search providing different solutions to keep water protected from CoV. Membrane techniques are very attractive solutions for virus elimination in water. In addition, another essential solution is nanotechnology and its applications in the detection and protection of human and water systems.

Efficient conversion of organic nitrogenous wastewater to nitrate solution driven by comammox Nitrospira

A bacterium capable of complete ammonia oxidation (comammox) has been widely found in various environments, whereas its industrial application is limited due to the difficulty of cultivation and/or enrichment. We developed a biological system to produce a high-quality nitrate solution for use in hydroponic fertilizer. The system was composed of two separate reactors for ammonification and nitrification and was found to have a stable and efficient performance in the conversion of organic nitrogen to nitrate. To determine the key microbes involved and better understand the system, the microbial communities in the reactors were analyzed by 16S rRNA gene sequencing in combination with a shotgun metagenomic analysis. Canonical ammonia-oxidizing bacteria, which can only catalyze the oxidation of ammonia to nitrite, were detected with negligible relative abundances, while a comammox Nitrospira-related operational taxonomic unit (OTU) dominated the nitrification reactor. Furthermore, the comammox-type ammonia monooxygenase was found to be 500 times more highly expressed than the canonical one by quantitative PCR, indicating that comammox was the main driver of the stable and efficient ammonia oxidation in the system. A microbial co-occurrence analysis revealed a strong positive correlation between Nitrospira and several OTUs, some of which, such as Anaerolinea OTU, have been found to co-exist with comammox Nitrospira in the biofilms of water treatment systems. Given that these OTUs were abundant only on microbe-attached carriers in the system, their co-existence within the biofilm could be beneficial to stabilize the Nitrospira abundance, possibly by physically preventing oxygen exposure as well as cell spillage.

Evaluating the effect of air flow rate on hybrid and conventional membrane bioreactors: Implications on performance, microbial activity and membrane fouling

This study addressed the impact of air flow rate on the performance, membrane fouling behaviour and microbial community of a sequencing batch conventional membrane bioreactor (SB-MBR) and a sequencing batch hybrid membrane bioreactor (SB-HMBR) with carrier media for biofilm growth. Two different scenarios were evaluated: high (6.4 L min^-1) and low (1.6 L min^-1) air flow rates, associated with high (4.5 mg L^-1) and low (1.5 mg L^-1) dissolved oxygen (DO) concentrations and specific aeration demand per membrane area (SAD_m) of 0.426 and 0.106 m³ m^-2 h^-1, respectively. Both reactors were subjected to alternating non-aerated and aerated conditions for organic matter (as chemical oxygen demand - COD), nitrogen and phosphate removal from a municipal wastewater. From the bacterial community analysis, the key players in nutrient removal processes were assessed. The results showed that COD removal efficiencies were above 95% in both MBRs, regardless of the aeration intensity, while complete ammonium removal was observed at the higher DO. However, nitrifying activity was adversely affected under low DO levels. High nitrification levels were re-established faster in the hybrid MBR, thanks to the presence of biofilm, where nitrifying activity was favoured and the bacterial community profile did not exhibit substantial changes upon DO reduction. A higher denitrification potential was found for the carrier-based MBR, resulting in lower effluent nitrate concentrations. Regarding phosphorus removal, a slight improvement was observed in the SB-HMBR at reduced DO, while in the SB-MBR it remained practically constant. Moreover, the specific phosphate uptake rate exhibited a significant increase, especially in the hybrid MBR, reaching 44.6 mgP gVSS^-1 h^-1. At lower aeration rate, however, worse filterability and higher membrane fouling rates were observed, especially in the conventional MBR. Overall, the results demonstrated that the hybrid MBR better withstood the reduced air flow rate and DO as compared to the conventional counterpart.

Multiple strategies for maintaining stable partial nitritation of low-strength ammonia wastewater

Stable production of nitrite is an essential technical challenge for mainstream anaerobic ammonia oxidation (Anammox). Due to difficulties in the stable inhibition of nitrite oxidizing bacteria (NOB) and maintenance of long-term partial nitritation (PN), integrated multiple, rather than a single, controlling strategies were preferred especially in a continuous-flow treatment system. A mathematically model was developed to evaluate effects of integrated multiple-strategies on ammonia oxidizing bacteria (AOB) and NOB. Through experimental study and model simulation, intermittent aeration and low SRT (3.5 d) resulted in unstable nitrite accumulation. Integrated multiple-strategies of intermittent aeration, low SRT (3.5 d) and bioaugmentation achieved nitrite accumulation rate of 81% and NO₂^--N/NH₄⁺-N ratio in effluent of 1.29, which was preferable for further anammox process. Meanwhile, the richness and diversity of microbial community increased due to the bioaugmentation. The AOB/NOB ratio increased from 13.8 to 34.1 which facilitated nitrite accumulation. In combination with bioaugmentation, the observed growth rates of AOB and NOB increased from -0.0835 and -0.0282 to 0.0434 and 0.0127 d^-1, respectively, which promoted AOB outcompeting NOB in the mixed liquid.

Microbial community in an anaerobic membrane bioreactor and its performance in treating organic solid waste under controlled and deteriorated conditions

The adoption of anaerobic membrane bioreactors (AnMBRs) for organic solid waste management is important for the recovery of energy and high-quality treated water. However, few studies have focused on AnMBR treatment of high-strength organic solid waste and the microorganisms involved under deteriorated operating conditions. In the present study, a 15-L bench-scale AnMBR was operated using a model slurry of high-strength organic solid waste with the organic loading rate (OLR) increasing from 2.3 g chemical oxygen demand (COD) L^-1 day^-1 (represented as a controlled condition) to 11.6 g COD L^-1 day^-1 (represented as a deteriorated condition), and microbial community dynamics over 120 days of operation were analyzed. The abundances of methanogens and bacteria that were dominant under the controlled condition decreased as a result of both high organic loading and sludge withdrawal under the deteriorated condition and did not recover thereafter. Instead, numbers of putative volatile fatty acid (VFA)-producing bacterial operational taxonomic units (OTUs) related to the genus Prevotella increased rapidly, reaching a relative abundance of 43.2%, leading to the deterioration of methanogenic AnMBR operation. Considering that the sequences of these OTUs exhibited relatively low sequence identity (91-95%) to those of identified Prevotella species, the results strongly suggest that the accumulation of VFAs by novel VFA-producing bacteria in the digestion sludge promotes the disruption of the methanogen community under deteriorated conditions.

Transition of microbial community structures after development of membrane fouling in membrane bioreactors (MBRs)

Although membrane fouling is a major issue when operating membrane bioreactors (MBRs), information regarding MBR performance and the sludge microbiome after the development of fouling remains limited. For the present study, two MBRs were operated for approximately 1 month under conditions of membrane fouling to investigate the effects of highly stressed environments on the sludge microbiome. After the development of fouling, a Collimonas-related operational taxonomic unit (OTU) was highly dominant in both reactors (relative abundances were ⁓ 63%) and this predomination caused a precipitous decline in the diversity indices of the sludge microbiomes. Because the excessive predomination by limited numbers of OTUs can lead to reductions in the adaptability to environmental changes, monitoring microbial diversity may be a valuable indicator for maintaining the robustness of a sludge microbiome. While, the decrease in the abundance of the Collimonas-related OTU resulted in the predomination of distinct microorganisms in each of the reactors despite being operated under the same conditions; this finding indicates existence of strong pressure to perturb the microbiomes. Detailed analyses suggested that the availability of terminal electron acceptors and competitive interactions between microbes via the secretion of extracellular proteins appeared to differentiate the structures of the respective microbial communities. During the extracellular proteins were secreted in the sludge, considerable portion of microbes were dead and large amounts of biomolecules seemed to be released; resultantly facilitated the predomination of fermentative anaerobes in one reactor as they use organic substances but not inorganic terminal electron acceptors to generate ATP under anaerobic conditions.

Assessing key microbial communities determining nitrogen transformation in composting of cow manure using illumina high-throughput sequencing

Insight to nitrogen transformation and cycling during composting is vital in developing management strategies that improve nitrogen content and quality of the end product. In this study, a positive ventilation device was constructed and used to elucidate nitrogen transformation and microbial community structures during the composting of cow manure and rice straw. Bacterial community successions were analyzed during the composting process by examining the change in their structural dynamics using high-throughput sequencing technique. The results revealed that dominant phyla, included Acidobacter, Proteobacteria, Firmicutes, Bacteroidetes, Chloroflexi, and Actinobacteria. Furthermore, a positive strong correlation was observed between the key bacterial communities and nitrogen transformation. Analyses of functional genera, Spearman correlation and Path showed that Thermomonospora_curvata_DSM_43183 followed by Luteimonas and Simiduia, Brevundimonas and Tamlana, Pseudomonas followed by Brevundimonas and Flavobacterium were the key bacterial communities affecting NH₄⁺-N, NO₃^--N, and NO₂^--N transformation, respectively. Thauera followed by Pseudomonas_putida_NBRC_14164 played a dominant role in N₂O transformation.

Transcriptome analysis of activated sludge microbiomes reveals an unexpected role of minority nitrifiers in carbon metabolism

Although metagenomics researches have illuminated microbial diversity in numerous biospheres, understanding individual microbial functions is yet difficult due to the complexity of ecosystems. To address this issue, we applied a metagenome-independent, de novo assembly-based metatranscriptomics to a complex microbiome, activated sludge, which has been used for wastewater treatment for over a century. Even though two bioreactors were operated under the same conditions, their performances differed from each other with unknown causes. Metatranscriptome profiles in high- and low-performance reactors demonstrated that denitrifiers contributed to the anaerobic degradation of heavy oil; however, no marked difference in the gene expression was found. Instead, gene expression-based nitrification activities that fueled the denitrifiers by providing the respiratory substrate were notably high in the high-performance reactor only. Nitrifiers-small minorities with relative abundances of <0.25%-governed the heavy-oil degradation performances of the reactors, unveiling an unexpected linkage of carbon- and nitrogen-metabolisms of the complex microbiome.

Organic degradation and extracellular products of pure oxygen aerated activated sludge under different F/M conditions

This study aimed to investigate the effect of food to microorganisms rate (F/M) on organic removal, extracellular polymeric substances (EPS) and soluble microbial products (SMP) of the pure oxygen aerated activated sludge running in batch mode. The F/M rates were controlled by adjusting the MLSS concentrations (2000, 5000, 8000 mg/L) and/or the initial TOC concentrations (100, 500 mg/L). Results showed that at high F/M rate (0.25 kg TOC/kg MLSS), the substrate degradation rate in the oxygen aerated reactor could reach 1.347 mg TOC/(L·min)), much higher than that in the air aerated reactor (0.640 mg TOC/(L·min)). The SMP concentrations with oxygen aeration were also higher than those with air aeration under high F/M conditions. The total EPS contents in the pure oxygen aerated sludge were significantly lower regardless of the different F/M rates. High F/M condition would lead to more amount of polysaccharides synthesis rather than proteins synthesis in EPS.

Microbiomes and chemical components of feed water and membrane-attached biofilm in reverse osmosis system to treat membrane bioreactor effluents

Reverse osmosis (RO) system at a stage after membrane bioreactor (MBR) is used for the wastewater treatment and reclamation. One of the most serious problems in this system is membrane fouling caused by biofilm formation. Here, microbiomes and chemical components of the feed water and membrane-attached biofilm of RO system to treat MBR effluents were investigated by non-destructive confocal reflection microscopy, excitation-emission fluorescence spectroscopy and high-throughput sequencing of 16S rRNA genes. The microscopic visualization indicated that the biofilm contained large amounts of microbial cells (0.5 ± 0.3~3.9 ± 2.3 µm³/µm²) and the extracellular polysaccharides (3.3 ± 1.7~9.4 ± 5.1 µm³/µm²) and proteins (1.0 ± 0.2~1.3 ± 0.1 µm³/µm²). The spectroscopic analysis identified the humic and/or fulvic acid-like substances and protein-like substances as the main membrane foulants. High-throughput sequencing showed that Pseudomonas spp. and other heterotrophic bacteria dominated the feed water microbiomes. Meanwhile, the biofilm microbiomes were composed of diverse bacteria, among which operational taxonomic units related to the autotrophic Hydrogenophaga pseudoflava and Blastochloris viridis were abundant, accounting for up to 22.9 ± 4.1% and 3.1 ± 0.4% of the total, respectively. These results demonstrated that the minor autotrophic bacteria in the feed water played pivotal roles in the formation of polysaccharide- and protein-rich biofilm on RO membrane, thereby causing membrane fouling of RO system.

Plant Litter Type Dictates Microbial Communities Responsible for Greenhouse Gas Production in Amended Lake Sediments

The microbial communities of lake sediments play key roles in carbon cycling, linking lakes to their surrounding landscapes and to the global climate system as incubators of terrestrial organic matter and emitters of greenhouse gasses, respectively. Here, we amended lake sediments with three different plant leaf litters: a coniferous forest mix, deciduous forest mix, cattails (Typha latifolia) and then examined the bacterial, fungal and methanogen community profiles and abundances. Polyphenols were found to correlate with changes in the bacterial, methanogen, and fungal communities; most notably dominance of fungi over bacteria as polyphenol levels increased with higher abundance of the white rot fungi Phlebia spp. Additionally, we saw a shift in the dominant orders of fermentative bacteria with increasing polyphenol levels, and differences in the dominant methanogen groups, with high CH₄ production being more strongly associated with generalist groups of methanogens found at lower polyphenol levels. Our present study provides insights into and basis for future study on how shifting upland and wetland plant communities may influence anaerobic microbial communities and processes in lake sediments, and may alter the fate of terrestrial carbon entering inland waters.

Moderate KMnO4-Fe(II) pre-oxidation for alleviating ultrafiltration membrane fouling by algae during drinking water treatment

Although ultrafiltration (UF) membranes are highly beneficial for removing algae, the removal process causes serious UF membrane fouling. To avoid the unfavorable effects of algal cells that have been damaged by oxidants, our previous study reported a novel, moderate pre-oxidation method (KMnO₄-Fe(II) process) that aimed to achieve a balance between the release of intracellular organic matter and enhanced algae removal. This study further investigated the performance of a UF membrane with KMnO₄-Fe(II) pretreatment in the presence of algae-laden reservoir water after a long running time. We found that algae could be completely removed, membrane fouling was significantly alleviated, and the overall performance was much better than that of Fe(III) coagulation alone. The transmembrane pressure (TMP) during Fe(III) coagulation increased to 42.8 kPa, however, that of the KMnO₄-Fe(II) process only increased to 25.1 kPa for after running for 90 d. The slower transmembrane pressure was attributed to the larger floc size, higher surface activity, and inactivation of algae. Although there was little effect on microorganism development, lower microorganism abundance (20.7%) was observed during the KMnO₄-Fe(II) process than during coagulation alone (44.9%) due to the release of extracellular polymeric substances. We also found that the floc cake layer was easily removed by washing, and many of the original membrane pores were clearly observed. Further analysis demonstrated that the effluent quality was excellent, especially its turbidity, chromaticity, and Mn and Fe concentrations. Based on the outstanding UF membrane performance, it may be concluded that the KMnO₄-Fe(II) process exhibits considerable potential for application in the treatment of algae-laden water.

Impact of meteorological conditions on the water quality of wastewater treatment systems: a comparative study of phytoremediation and membrane bioreactor system

Two demonstration wastewater treatment systems, i.e. a phytoremediation system and a membrane bioreactor (MBR) system, were studied for a six-month period from August 2016 to January 2017. The phytoremediation system consists of wetland cells implanted with diverse phytoremediation macrophyte species at NUST H-12 sector Islamabad, Pakistan, while the MBR system comprises primary clarifiers, membrane tanks and bio tanks that treat domestic wastewater through hybridization of biological and biomechanical techniques. The phytoremediation system receives domestic wastewater at the rate of 283 m³/d, and greater hydraulic efficiencies were achieved because of compartmentalization and higher aspect ratios, whereas the MBR system receives 50 m³/d. The present study was conducted to analyze and compare the correlation between water quality parameters of wastewater treatment systems and meteorological conditions. Statistically significant correlation was exhibited between eight water quality parameters (pH, EC, turbidity, dissolved oxygen, total suspended solids (TSS), chemical oxygen demand (COD), biological oxygen demand (BOD) and total coliforms (TC)) and meteorological factors (ambient temperature and relative humidity). Predominant species isolated and identified through polymerase chain reaction and 16S rRNA sequencing from wastewater of the phytoremediation system and sludge of the MBR system belong to the phylum Proteobacteria with relatively higher abundance of Enterobacter, Shigella, Escherichia and Salmonella genera.

Available forms of nutrients and heavy metals control the distribution of microbial phospholipid fatty acids in sediments of the Three Gorges Reservoir, China

The construction of the Three Gorges Reservoir (TGR) as well as the development of local industry and agriculture not only had tremendous impacts on the environment but also affected human health. Although water, soil, and air in the TGR have been well studied for environmental risk assessment, very little information is available on benthic sediments and microorganisms. In this study, sedimentary samples were collected along the main stream of the TGR to examine microbial phospholipid fatty acids (PLFA) and relevant variables (e.g., nutrients and heavy metals) after the full operation of the TGR. The results showed that there were prominent trends (increase or decrease) of sedimentary PLFAs and properties from downstream to upstream. Bacteria-specific PLFA decreased toward the dam, while fungi-specific PLFA did not show any significant trend. The PLFA ratio of fungi to bacteria (F/B) increased along the mainstream. The total PLFA concentration, which represents the microbial biomass, decreased significantly toward the dam. Upstream and downstream sampling points were clearly distinguished by PLFA ordination in the redundancy analysis (RDA). That finding showed microbial PLFAs to have an obvious distribution pattern (increase or decrease) in the TGR. The PLFA distribution was markedly controlled by nutrients and heavy metals, but nutrients were more important. Moreover, among nutrients, Bio-P, NH₄⁺-N, NO₃^--N, and DOC were more important than TP, TN, TOC, and pH in controlling PLFA distribution. For heavy metals, Tl, V, Mo, and Ni were more important than Zn, Cu, Cd, and Pb. These findings suggested that Tl, V, Mo, and Ni should not be ignored to guard against their pollution in the TGR, and we should pay attention to them and make them our first priority. This study highlighted that the construction of the TGR changed riverine environments and altered microbial communities in sediments by affecting sedimentary properties. It is a reminder that the microbial ecology of sediment as an indicator should be considered in assessing the eco-risk of the TGR.

Eukaryotic Microbiomes of Membrane-Attached Biofilms in Membrane Bioreactors Analyzed by High-Throughput Sequencing and Microscopic Observations

Limited information is currently available on the contribution of eukaryotes to the reactor performance of membrane bioreactors (MBRs). Using high-throughput Illumina sequencing of 18S rRNA genes and microscopic observations, we investigated eukaryotic microbiomes in membrane-attached biofilms in MBRs treating piggery wastewater. Protozoa preying on bacteria were frequently detected under stable conditions when membrane clogging was suppressed. However, the eukaryotes preying upon protozoa became predominant in biofilms when membrane fouling rapidly progressed. We herein demonstrated that a comprehensive investigation of eukaryotic microbiomes using high-throughput sequencing contributes to a better understanding of the microbial ecology involved in wastewater treatment.

Dominance of candidate Saccharibacteria in a membrane bioreactor treating medium age landfill leachate: Effects of organic load on microbial communities, hydrolytic potential and extracellular polymeric substances

A membrane bioreactor (MBR), accomplishing high nitrogen removal efficiencies, was evaluated under various landfill leachate concentrations (50, 75 and 100% v/v). Proteinous and carbohydrate extracellular polymeric substances (EPS) and soluble microbial product (SMP) were strongly correlated (p<0.01) with organic load, salinity and NH₄⁺-N. Exceptionally high β-glucosidase activities (6700-10,100Ug^-1) were determined during MBR operation with 50% v/v leachate, as a result of the low organic carbon availability that extendedly induced β-glucosidases to breakdown the least biodegradable organic fraction. Illumina sequencing revealed that candidate Saccharibacteria were dominant, independently of the leachate concentration applied, whereas other microbiota (21.2% of total reads) disappeared when undiluted leachate was used. Fungal taxa shifted from a Saccharomyces- to a newly-described Cryptomycota-based community with increasing leachate concentration. Indeed, this is the first report on the dominance of candidate Saccharibacteria and on the examination of their metabolic behavior in a bioreactor treating real wastewater.

Architecture, component, and microbiome of biofilm involved in the fouling of membrane bioreactors

Biofilm formation on the filtration membrane and the subsequent clogging of membrane pores (called biofouling) is one of the most persistent problems in membrane bioreactors for wastewater treatment and reclamation. Here, we investigated the structure and microbiome of fouling-related biofilms in the membrane bioreactor using non-destructive confocal reflection microscopy and high-throughput Illumina sequencing of 16S rRNA genes. Direct confocal reflection microscopy indicated that the thin biofilms were formed and maintained regardless of the increasing transmembrane pressure, which is a common indicator of membrane fouling, at low organic-loading rates. Their solid components were primarily extracellular polysaccharides and microbial cells. In contrast, high organic-loading rates resulted in a rapid increase in the transmembrane pressure and the development of the thick biofilms mainly composed of extracellular lipids. High-throughput sequencing revealed that the biofilm microbiomes, including major and minor microorganisms, substantially changed in response to the organic-loading rates and biofilm development. These results demonstrated for the first time that the architectures, chemical components, and microbiomes of the biofilms on fouled membranes were tightly associated with one another and differed considerably depending on the organic-loading conditions in the membrane bioreactor, emphasizing the significance of alternative indicators other than the transmembrane pressure for membrane biofouling.

Effects of Organic-Loading-Rate Reduction on Sludge Biomass and Microbial Community in a Deteriorated Pilot-Scale Membrane Bioreactor

The effects of a precipitous decrease in the inlet organic loading rate on sludge reductions and the microbial community in a membrane bioreactor were investigated. The sludge biomass was markedly reduced to 47.4% of the initial concentration (approximately 15,000 mg L⁻¹) within 7 d after the organic loading rate was decreased by half (450 to 225 mg chemical oxygen demand L⁻¹ d⁻¹). An analysis of the microbial community structure using high-throughput sequencing revealed an increase in the abundance of facultative predatory bacteria-related operational taxonomic units as well as microorganisms tolerant to environmental stress belonging to the classes Deinococci and Betaproteobacteria.

Functional maintenance and structural flexibility of microbial communities perturbed by simulated intense rainfall in a pilot-scale membrane bioreactor

Intense rainfall is one of the most serious and common natural events, causing the excessive inflow of rainwater into wastewater treatment plants. However, little is known about the impacts of rainwater dilution on the structure and function of the sludge microorganisms. Here, high-throughput sequencing of 16S ribosomal RNA (rRNA) genes was implemented to describe the microbial community dynamics during the simulated intense rainfall situation (event i) in which approximately 45 % of the sludge biomass was artificially overflowed by massive water supply in a pilot-scale membrane bioreactor. Thereafter, we investigated the functional and structural responses of the perturbed microbial communities to subsequent conditional changes, i.e., an increase in organic loading rate from 225 to 450 mg chemical oxygen demand (COD) l(-1) day(-1) (event ii) and an addition of a microbiota activator (event iii). Due to the event i, the COD removal declined to 78.2 %. This deterioration coincided with the decreased microbial diversity and the proliferation of the oligotrophic Aquabacterium sp. During the succeeding events ii and iii, the sludge biomass increased and the COD removal became higher (86.5-97.4 %). With the apparent recovery of the reactor performance, microbial communities became diversified and the compositions dynamically changed. Notably, various bacterial micropredators were highly enriched under the successive conditions, most likely being involved in the flexible reorganization of microbial communities. These results indicate that the activated sludge harbored functionally redundant microorganisms that were able to thrive and proliferate along with the conditional changes, thereby contributing to the functional maintenance of the membrane bioreactor.