Extraction and characterization of xylan from sugarcane tops as a potential commercial substrate

A novel thermophilic recombinant obligate xylobiohydrolase (AcGH30A) from Acetivibrio clariflavus orchestrates the deconstruction of xylan polysaccharides

GH30 xylobiohydrolases, an expanding enzyme category, need deeper insights for optimal use. The primary aim of this study was to characterize a new xylobiohydrolase, AcGH30A of GH30 family from Acetivibrio clariflavus. The gene encoding AcGH30A was cloned using pET28a(+) vector and expressed in E. coli BL21(DE3) cells. AcGH30A was purified by immobilized metal-ion affinity chromatography. SDS-PAGE analysis of AcGH30A showed molecular mass of ~58 kDa. AcGH30A showed optimum temperature 80 °C and optimum pH 7.0. AcGH30A was stable (maintaining >80 % of control activity) in pH range, 4-7 and temperature range, 30 °C -70 °C when incubated for 90 min. AcGH30A displayed melting temperature, 72 °C and half-life, 21 days at 4 °C. The enzyme activity of AcGH30A was enhanced by 10 mM Ca2+ and Mg2+ ions by 25 % and 21 %, respectively, whereas 10 mM Co2+, Zn2+, Fe2+, and Cu2+ ions significantly reduced it. AcGH30A showed activity against various xylan polysaccharides displaying highest Vmax, 139 U.mg-1 and KM, 0.71 mg.ml-1 against 4-O-methyl glucuronoxylan under optimum conditions. TLC, HPLC and LC-MS analyses of AcGH30A hydrolyzed products from xylan substrates revealed the release of sole product, xylobiose, confirming it as an obligate xylobiohydrolase. AcGH30A being a highly thermostable enzyme can be potentially utlilized in various biotechnological applications.

Xylans extracted from branches and leaves of Protium puncticulatum: antioxidant, cytotoxic, immunomodulatory, anticoagulant, antitumor, prebiotic activities and their structural characterization

This work aimed to isolate and characterize xylans from branches and leaves of Protium puncticulatum, in addition to evaluating its in vitro biological and prebiotic potential. The results showed that the chemical structure of the obtained polysaccharides is similar being classified as homoxylans. The xylans presented an amorphous structure, in addition to being thermally stable and presenting a molecular weight close to 36 g/mol. With regard to biological activities, it was observed that xylans were able to promote low antioxidant activity (< 50%) in the different assays evaluated. The xylans also showed no toxicity against normal cells, in addition to being able to stimulate cells of the immune system and showing promise as anticoagulant agents. In addition to presenting promising antitumor activity in vitro. In assays of emulsifying activity, xylans were able to emulsify lipids in percentages below 50%. Regarding in vitro prebiotic activity, xylans were able to stimulate and promote the growth of different probiotics. Therefore, this study, in addition to being a pioneer, contributes to the application of these polysaccharides in the biomedical and food areas.

Supplementary Information

The online version contains supplementary material available at 10.1007/s13205-023-03506-1.

Computational design and structure dynamics analysis of bifunctional chimera of endoxylanase from Clostridium thermocellum and xylosidase from Bacteroides ovatus

Development of chimeric enzymes by protein engineering can more efficiently contribute toward biomass conversion for bioenergy generation. Therefore, prior to experimental validation, a computational approach by modeling and molecular dynamic simulation can assess the structural and functional behavior of chimeric enzymes. In this study, a bifunctional chimera, CtXyn11A-BoGH43A comprising an efficient endoxylanase (CtXyn11A) from Clostridium thermocellum and xylosidase (BoGH43A) from Bacteroides ovatus was computationally designed and its binding and stability analysis with xylooligosaccharides were performed. The modeled chimera showed β-jellyroll fold for CtXyn11A and 5-bladed β-propeller fold for BoGH43A module. Stereo-chemical properties analyzed by Ramachandran plot showed 98.8% residues in allowed region, validating the modeled chimera. The catalytic residues identified by multiple sequence alignment were Glu94 and Glu184 for CtXyn11A and Asp229 and Glu384 for BoGH43A modules. CtXyn11A followed retaining-type, whereas BoGH43A enforced inverting-type of reaction mechanism during xylan hydrolysis as revealed by superposition and GH11 and GH43 familial analyses. Molecular docking studies showed binding energy, (ΔG) - 4.54 and - 4.18 kcal/mol for CtXyn11A and BoGH43A modules of chimera, respectively, with xylobiose, while - 3.94 and - 3.82 kcal/mol for CtXyn11A and BoGH43A modules of chimera, respectively, with xylotriose. MD simulation of CtXyn11A-BoGH43A complexed with xylobiose and xylotriose till 100 ns displayed stability by RMSD, compactness by R g and conformational stability by SASA analyses. The lowered values of RMSF in active-site residues, Glu94, Glu184, Asp229, Asp335 and Glu384 confirmed the efficient binding of chimera with xylobiose and xylotriose. These results were in agreement with the earlier experimental studies on CtXyn11A releasing xylooligosaccharides from xylan and BoGH43A releasing d-xylose from xylooligosaccharides and xylobiose. The chimera showed stronger affinity in terms of total short-range interaction energy; - 190 and - 121 kJ/mol for with xylobiose and xylotriose, respectively. The bifunctional chimera, CtXyn11A-BoGH43A showed stability and integrity with xylobiose and xylotriose. The designed chimera can be constructed and applied for efficient biomass conversion.

Overview of fermentation process: structure-function relationship on protein quality and non-nutritive compounds of plant-based proteins and carbohydrates

Demands for high nutritional value-added food products and plant-based proteins have increased over the last decade, in line with the growth of the human population and consumer health awareness. The quality of the plant-based proteins depends on their digestibility, amino acid content, and residues of non-nutritive compounds, such as phenolic compounds, anti-nutritional compounds, antioxidants, and saponins. The presence of these non-nutritive compounds could have detrimental effects on the quality of the proteins. One of the solutions to address these shortcomings of plant-based proteins is fermentation, whereby enzymes that present naturally in microorganisms used during fermentation are responsible for the cleavage of the bonds between proteins and non-nutritive compounds. This mechanism has pronounced effects on the non-nutritive compounds, resulting in the enhancement of protein digestibility and functional properties of plant-based proteins. We assert that the types of plant-based proteins and microorganisms used during fermentation must be carefully addressed to truly enhance the quality, functional properties, and health functionalities of plant-based proteins.Supplemental data for this article is available online at here. show.

Techno-economic analysis reveals the untapped potential of wood biochar

The United Nations estimates the rate of deforestation over 10 million hectares per year, with additional infested wood available due to drought, bark beetle calamity and other damage vectors. Processing the hard-to-reach infested wood into biochar via mobile pyrolysis units seems to be a good option for fire prevention. However, since most biochar is currently produced mainly from biological waste, there is not enough experience with wood biochar on a large scale. Review of current knowledge, followed by techno-economic assessment reveals that following the chemical composition of the feedstock, wood biochar outperforms other types of biochar in terms of high porosity. Therefore, wood biochar shows excellent results in increasing the amount of plant-available water content in soil and appears to be an excellent tool for recycling nutrients (especially into plant-available forms of phosphorus and nitrogen). The overall positive effects of biochar application change from abiotic to biotic over time because as it decays, many of its physical properties disappear, but it can boost soil microbial communities on which soil fertility depends. As global climate change creates a wide range of factors that damage forest cover, wood biochar consequently represents untapped potential in the field of soil, nutrient, and energy management.

Alkaline pretreatment and response surface methodology based recombinant enzymatic saccharification and fermentation of sugarcane tops

In present study, the water-soluble extractives removal prior to alkali pretreatment of sugarcane tops (SCT) was carried out. The solid alkali pretreated SCT (apSCT) recovered on Field-emission scanning electron microscopy (FE-SEM) analysis showed exposure of cellulosic fibres as compared with raw SCT. The analyses of apSCT by Fourier Transform Infrared (FT-IR) Spectroscopy, X-ray diffraction (XRD) and High performance liquid chromatography (HPLC) analysis also confirmed the enhanced cellulose content in apSCT. Optimum conditions for response surface methodology based saccharification of apSCT at 40 °C, 150 rpm were 2.14% (w/v) apSCT loading in citrate-phosphate buffer (50 mM, pH 6.0), recombinant hydrolytic enzymes (from Clostridium/Hungateiclostridium thermocellum) loading for endo-1,4-β-glucanase (CtCel8A) = 213.2 U/g, cellobiohydrolase (CtCBH5A) = 272.5 U/g and β-glucosidase (HtBg1) = 299.8 U/g for 49.2 h. Under optimized saccharification conditions, the total reducing sugar yield was 265 mg/g (glucose 214 mg/g) of apSCT. Fermentation of produced glucose by S. cerevisiae gave 0.19 g/g glucose of bioethanol.

Promising activated carbon derived from sugarcane tip as electrode material for high-performance supercapacitors

We present a simple, low-cost method for producing activated-carbon materials from sugarcane tips (ST) via two-step pre-carbonization and KOH activation treatment. After optimizing the amount of KOH, the resulting ST-derived activated carbon prepared with a KOH to PC-ST mass ratio of 2 (ACST-2) contained 17.04 wt% oxygen and had a large surface area of 1206.85 m² g^-1, which could be attributed to the large number of micropores in ACST-2. In a three-electrode system, the ACST-2 electrode exhibited a high specific capacitance of 259 F g^-1 at 0.5 A g^-1 and good rate capability with 82.66% retention from 0.5 to 10 A g^-1. In addition, it displayed a high capacitance retention of 89.6% after 5000 cycles at a current density of 3 A g^-1, demonstrating excellent cycling stability. Furthermore, the ACST-2//ACST-2 symmetric supercapacitor could realize a high specific energy density of 7.93 W h kg^-1 at a specific power density of 100 W kg^-1 in 6 M KOH electrolyte. These results demonstrate that sugarcane tips, which are inexpensive and easily accessible agricultural waste, can be used to create a novel biomass precursor for the production of low-cost activated carbon materials for high-performance supercapacitors.

Two-Step Saccharification of the Xylan Portion of Sugarcane Waste by Recombinant Xylanolytic Enzymes for Enhanced Xylose Production

Sugarcane bagasse (SB) and sugarcane trash (SCT) containing 30% hemicellulose content are the waste from the sugarcane industry. Hemicellulose being heterogeneous, more complex, and less abundant than cellulose remains less explored. The optimized conditions for the pretreatment of SB and SCT for maximizing the delignification are soaking in aqueous ammonia (SAA), 18.5 wt %, followed by heating at 70 °C for 14 h. The optimization of hydrolysis of SAA pretreated (ptd) SB and SCT by the Box-Behnken design in the first step of saccharification by xylanase (CtXyn11A) and α-l-arabinofuranosidase (PsGH43_12) resulted in the total reducing sugar (TRS) yield of xylooligosaccharides (TRS_(XOS)) of 93.2 mg/g ptd SB and 85.1 mg/g ptd SCT, respectively. The second step of saccharification by xylosidase (BoGH43) gave the TRS yield of 164.7 mg/g ptd SB and 147.2 mg/g ptd SCT. The high-performance liquid chromatography analysis of hydrolysate obtained after the second step of saccharification showed 69.6% xylan-to-xylose conversion for SB and 64.1% for SCT. This study demonstrated the optimization of the pretreatment method and of the enzymatic saccharification by recombinant xylanolytic enzymes, resulting in the efficient saccharification of ptd hemicellulose to TRS by giving 73.5% conversion for SB and 71.1% for SCT. These optimized conditions for the pretreatment and saccharification of sugarcane waste can also be used at a large scale.