Ta-doped TiO 2 as photocatalyst for UV-A activated elimination of chemical warfare agent simulant

Highly efficient visible light active doped metal oxide photocatalyst and SERS substrate for water treatment

The development of efficient nanomaterials with promising optical and surface properties for multifunctional applications has always been a subject of novel research. In this work, the study of highly efficient TiO₂ nanorods (NRs) and Ta-doped TiO₂ NRs (Ta-TiO₂ NRs) synthesized by alkaline hydrothermal treatment followed by soaking treatment has been reported. NRs were investigated for their potential applications as recyclable/reproducible visible light active photocatalysts and surface-enhanced Raman scattering (SERS) substrates in wastewater treatment. NRs were characterized by various microscopic (scanning and transmission electron microscopy), spectroscopic (X-ray diffraction, X-ray photoelectron, UV-visible, photoluminescence, and Raman spectroscopy), and surface (Brunauer-Emmett-Teller) techniques. The NRs exhibited promising optical properties with a band gap of 2.95 eV (TiO₂ NRs) and 2.58 eV (Ta-TiO₂ NRs) showing excellent photo-degradation activities for methylene blue (MB) dye molecules under natural sunlight. Particularly, Ta-TiO₂ NRs showed enhanced response as visible light active photocatalysts in normal sunlight and also as SERS substrate attributed to the additional defects introduced by Ta doping. It could be explained by the combined effect of doping-induced enhanced visible light absorption and charge transfer (CT) properties of Ta-TiO₂ NRs. Furthermore, Ta-TiO₂ NRs were investigated for their long-term stability, reproducibility of the data, and recyclability in view of their potential applications in water treatment.

Highly Cross-linked Epoxy Coating for Barring Organophosphate Chemical Warfare Agent Permeation

Chemical warfare agents (CWAs) can be absorbed in polymeric coatings through absorption and permeation, thus presenting a lethal touch and vapor hazards to people. Developing a highly impermeable polymer coating against CWAs, especially against organophosphate CWAs (OPs), is challenging and desirable. Herein, fluorinated epoxy (F-EP) and epoxy (EP) coatings with different cross-link densities were prepared to resist OPs. The effects of the polymer coating structure, including cross-link density, chemical composition and free volume, on the chemical resistance to dimethyl methylphosphonate (DMMP, Soman simulant) were investigated in detail. Meanwhile, the chemical resistance to Soman and VX was examined. The results reveal that the cross-link density is a critical factor in determining the chemical resistance of the coatings. Highly cross-linked EP and F-EP coatings with dense and solid cross-linked networks can fully bar DMMP and OPs permeation during the test time. At low or medium cross-link densities, the EP coating with a lower retention of DMMP exhibited a higher resistance than the F-EP coating due to the lower interaction with DMMP and smaller free-volume holes and lower relative fractional free volume. These results suggest that increasing the cross-link density is a reasonable approach to control the chemical resistance of polymer networks against OPs.

Mechanistic understanding of the increased photoactivity of TiO2 nanosheets upon tantalum doping

Anatase TiO₂ is doped with Ta cations through a hydrothermal route. Based on X-ray photoelectron spectroscopy and X-ray absorption near-edge structure spectroscopy, the Ta dopants exist in the 5+-oxidation state. The oxidation state is insensitive to the Ta loading amount. Extended X-ray absorption fine structure spectroscopy confirms that the local structure around Ta cations is not identical between the Ta-doped samples. The Ta-O distance monotonically increases with the Ta loading amount due to a gradually expanding lattice. The Ta-doped samples show higher activity than pristine TiO₂ for photomineralizing recalcitrant organics. The enhanced photocatalytic activity is proposed to be due to an enhanced population of photoexcited electrons, as probed using light-induced IR absorption spectroscopy, and an extended electron lifetime, as probed using time-resolved microwave conductivity, which are associated with the formation of Ti³⁺ defect states acting as shallow electron traps. The maximum photocatalytic activity is observed for TiO₂ doped with 2 mol% of Ta, which shows enhancement of mineralization efficiency (about 3 times) and enhancement of electron population (up to 20 times), as compared to those of pristine TiO₂. The fundamental question of why a proper metal doping into TiO₂ increases photocatalytic activity is discussed in this study.

Recent progress in decontamination system against chemical and biological materials: challenges and future perspectives

Environmental contamination is one of the key issues of developing countries in recent days, and several types of methods and technologies have been developed to overcome these issues. This paper highlights the importance of decontamination in a contaminated environment that normally precedes protection, detection and identification followed by medical support. Further, this paper especially focuses on individual and collective NBC decontamination required on navy ships and correspondingly presents solutions (viable and economical) through the use of indigenously developed decontamination equipment. The paper also highlights the integration of various decontamination technologies with pre-existing ship decontamination systems, indicating the need for various decontaminants. Finally, we will also focus on new decontamination systems based on nanomaterials and enzymes and their utilization.

Modified-TiO2 Photocatalyst Supported on β-SiC Foams for the Elimination of Gaseous Diethyl Sulfide as an Analog for Chemical Warfare Agent: Towards the Development of a Photoreactor Prototype

In the context of the increase in chemical threat due to warfare agents, the development of efficient methods for destruction of Chemical Warfare Agents (CWAs) are of first importance both for civilian and military purposes. Amongst possible methods for destruction of CWAs, photocatalytic oxidation is an alternative one. The present paper reports on the preparation of Ta and Sn doped TiO2 photocatalysts immobilized on β-SiC foams for the elimination of diethyl sulfide (DES) used as a model molecule mimicking Yperite (Mustard Gas) in gaseous phase. Photo-oxidation efficiency of doped TiO2 catalyst has been compared with TiO2-P25. Here, we demonstrate that the Sn doped-TiO2 with a Polyethylene glycol (PEG)/TiO2 ratio of 7 exhibits the best initial activity (up to 90%) but is deactivates more quickly than Ta doped-TiO2 (40% after 800 min). The activity of the catalysts is strongly influenced by the adsorption properties of the support, as β-SiC foams adsorb DES and other sulfur compounds. This adsorption makes it possible to limit the poisoning of the catalysts and to maintain an acceptable conversion rate even after ten hours under continuous DES flow. Washing with NaOH completely regenerates the catalyst after a firs treatment and even seems to “wash” it by removing impurities initially present on the foams.

Integrating surface plasmon resonance and slow photon effects in nanoporous anodic alumina photonic crystals for photocatalysis

This study explores the potential of gold-coated titania-functionalized nanoporous anodic alumina distributed Bragg reflectors (Au-TiO₂-NAA-DBRs) as platforms to enhance photocatalytic reactions by integrating “slow photons” and surface plasmon resonance (SPR).

Analysis of the Precursors, Simulants and Degradation Products of Chemical Warfare Agents

Recent advances in analysis of precursors, simulants and degradation products of chemical warfare agents (CWA) are reviewed. Fast and reliable analysis of precursors, simulants and CWA degradation products is extremely important at a time, when more and more terrorist groups and radical non-state organizations use or plan to use chemical weapons to achieve their own psychological, political and military goals. The review covers the open source literature analysis after the time, when the chemical weapons convention had come into force (1997). The authors stated that during last 15 years increased number of laboratories are focused not only on trace analysis of CWA (mostly nerve and blister agents) in environmental and biological samples, but the growing number of research are devoted to instrumental analysis of precursors and degradation products of these substances. The identification of low-level concentration of CWA degradation products is often more important and difficult than the original CWA, because of lower level of concentration and a very large number of compounds present in environmental and biological samples. Many of them are hydrolysis products and are present in samples in the ionic form. For this reason, two or three instrumental methods are used to perform a reliable analysis of these substances.

One-pot synthesis of lightly doped Zn1-x Cu x O and Au-Zn1-x Cu x O with solar light photocatalytic activity in liquid phase

We report on the facile and low-temperature one-pot chemical synthesis of lightly doped Zn_1-x Cu _x O and hybrid Au-Zn_1-x Cu _x O photocatalysts with low Cu molar content (0 < x < 0.7%) using 1,3-propanediol polyol simultaneously as solvent, reducing and a stabilizing agent, without any final thermal treatment. The photocatalysts have been characterized by X-ray diffraction, N₂ adsorption study, UV-vis diffuse reflectance spectroscopy, inductively coupled plasma optical emission spectroscopy, and transmission electron microscopy. The lightly doped hybrid Au-Zn_1-x Cu _x O photocatalysts consisted in faceted quasi-spherical large-size Au nanoparticle cores surrounded by closely packed small-size Zn_1-x Cu _x O nanoparticles. Taking the photocatalytic degradation of Diuron under solar light as liquid-phase test reaction, the lightly doped Au-Zn_1-x Cu _x O hybrid photocatalysts with optimized x = 0.09% Cu content showed strongly enhanced photocatalytic activity when compared to the bare ZnO counterpart. The observed 16-fold higher degradation rate constant resulted jointly from the light doping of ZnO with Cu to form Zn_1-x Cu _x O photocatalyst and further from the addition of gold nanoparticles allowing interfacial oxide-to-metal electron transfer within the hybrid Au-Zn_1-x Cu _x O photocatalyst.

Layer-by-Layer Photocatalytic Assembly for Solar Light-Activated Self-Decontaminating Textiles

Novel photocatalytic nanomaterials that can be used to functionalize textiles, conferring to them efficient solar-light-activated properties for the decontamination of toxic and lethal agents, are described. Textiles functionalized with one-dimensional (1D) SnS₂-based nanomaterials were used for photocatalytic applications for the first time. We showed that 1D SnS₂/TiO₂ nanocomposites can be easily and strongly affixed onto textiles using the layer-by-layer deposition method. Ultrathin SnS₂ nanosheets were associated with anatase TiO₂ nanofibers to form nano-heterojunctions with a tight interface, considerably increasing the photo-oxidative activity of anatase TiO₂ due to the beneficial interfacial transfer of photogenerated charges and increased oxidizing power. Moreover, it is easy to process the material on a larger scale and to regenerate these functionalized textiles. Our findings may aid the development of functionalized clothing with solar light-activated photocatalytic properties that provide a high level of protection against chemical warfare agents.