An electron-reservoir Re(I) complex for enhanced efficiency for reduction of CO2 to CO

Strategies for the Design of PEDOT Analogues Unraveled: the Use of Chalcogen Bonds and σ-Holes

In this theoretical study, we set out to demonstrate the substitution effect of PEDOT analogues on planarity as an intrinsic indicator for electronic performance. We perform a quantum mechanical (DFT) study of PEDOT and analogous model systems and demonstrate the usefulness of the ωB97X-V functional to simulate chalcogen bonds and other noncovalent interactions. We confirm that the chalcogen bond stabilizes the planar conformation and further visualize its presence via the electrostatic potential surface. In comparison to the prevalent B3LYP, we gain 4-fold savings in computational time and simulate model systems of up to a dodecamer. Implications for design of conductive polymers can be drawn from the results, and an example for self-doped polymers is presented where modulation of the strength of the chalcogen bond plays a significant role.

Photoelectrocatalytic Dioxygen Reduction Based on a Novel Thiophene-Functionalized Tricarbonylchloro(1,10-phenanthroline)rhenium(I)

A novel Re (I) complex of [Re(CO)3Cl(L)], {L = 2-([2,2’-bithiophen]-5-yl)-1-phenyl-1H-imidazo [4,5-f][1,10]phenanthroline}, was synthesized, and its optical (UV–Visible absorption and emission spectroscopy), cyclovoltammetric and photoelectrochemical oxygen reduction properties were studied. The geometric and electronic properties were also investigated by density functional theory calculations. It was found that the ITO electrode coated with drop-casted [Re(CO)3Cl(L)] film exhibited cathodic photocurrent generation characteristics. The illuminated film exhibited a maximum cathodic photocurrent up to 30.4 μA/cm2 with an illumination intensity of 100 mW/cm2 white light at a bias potential of −0.4 V vs. SCE in O2-saturated electrolyte solution, which was reduced by 5.1-fold when thoroughly deoxygenated electrolyte solution was used, signaling that the electrode performed well on the photoelectrochemical oxygen reduction. The photo-electrocatalytic hydrogen peroxide production was proved with a maximum H2O2 concentration of 6.39 μM during 5 h of the photoelectrocatalytic process. This work would guide the construction of more efficient rhenium-based photo(electro)catalytic molecular systems for O2 sensing, hydrogen peroxide production and other types of photoelectrochemical energy conversion and storage.

Highly Robust Rhenium(I) Bipyridyl Complexes Containing Dipyrromethene-BF2 Chromophores for Visible Light-Driven CO2 Reduction

New rhenium bipyridyl complexes with dipyrromethene-BF₂ chromophores (A-ReBDP-CZ, A-ReBDP₂ , ReBDP-CZ, and ReBDP₂ ) were developed for highly efficient photocatalytic carbon dioxide (CO₂ ) reduction to carbon monoxide (CO). These catalysts consisted of two moderate electron-deficient groups (dipyrromethene-BF₂ , BDP) as the visible-light-harvesting antenna as well as both electron donor (N-phenylcarbazole, CZ) and acceptor (BDP) on Re bipyridyl framework. Among ReBDP-CZ and ReBDP₂ complexes, the ReBDP₂ incorporating two electron-deficient BDP chromophores had a longer-lived photoexcited state (182.4 μs) and a twofold enhanced molar absorption coefficient (ϵ=157000 m^-1  cm^-1 ) compared with ReBDP-CZ. Thus, ReBDP₂ achieved the superior photocatalytic reactivity and stability with a CO turnover number (TON_CO ) value as high as 1323 and quantum yield (Φ_CO ) up to 55 %, which was the most excellent photocatalysis efficiency among the single-active-site Re catalysts without additional photosensitizer. Furthermore, the acetylene-bridged linker was detrimental to the photoactivity and durability of the catalyst. In brief, two BDP-based Re bipyridyl systems with outstanding catalytic performance and significant visible-light-harvesting capabilities in the solar spectrum offer a promising strategy for solar-to-fuel conversion schemes.

Charge carrier dynamics and reaction intermediates in heterogeneous photocatalysis by time-resolved spectroscopies

Sunlight as the most abundant renewable energy holds the promise to make our society sustainable. However, due to its low power density and intermittence, efficient conversion and storage of solar energy as a clean fuel are crucial. Apart from solar fuel synthesis, sunlight can also be used to drive other reactions including organic conversion and air/water purification. Given such potential of photocatalysis, the past few decades have seen a surge in the discovery of photocatalysts. However, the current photocatalytic efficiency is still very moderate. To address this challenge, it is important to understand fundamental factors that dominate the efficiency of a photocatalytic process to enable the rational design and development of photocatalytic systems. Many recent studies highlighted transient absorption spectroscopy (TAS) and time-resolved infrared (TRIR) spectroscopy as powerful approaches to characterise charge carrier dynamics and reaction pathways to elucidate the reasons behind low photocatalytic efficiencies, and to rationalise photocatalytic activities exhibited by closely related materials. Accordingly, as a fast-moving area, the past decade has witnessed an explosion in reports on charge carrier dynamics and reaction mechanisms on a wide range of photocatalytic materials. This critical review will discuss the application of TAS and TRIR in a wide range of heterogeneous photocatalytic systems, demonstrating the variety of ways in which these techniques can be used to understand the correlation between materials design, charge carrier behaviour, and photocatalytic activity. Finally, it provides a comprehensive outlook for potential developments in the area of time-resolved spectroscopies with an aim to provide design strategies for photocatalysts.

Computational Design of Rhenium(I) Carbonyl Complexes for Anticancer Photodynamic Therapy

New Re(I) carbonyl complexes are proposed as candidates for photodynamic therapy after investigating the effects of the pyridocarbazole-type ligand conjugation, addition of substituents to this ligand, and replacement of one CO by phosphines in [Re(pyridocarbazole)(CO)3(pyridine)] complexes by means of the density functional theory (DFT) and time-dependent DFT. We have found, first, that increasing the conjugation in the bidentate ligand reduces the highest occupied molecular orbital (HOMO)-lowest unoccupied molecular orbital (LUMO) energy gap of the complex, so its absorption wavelength red-shifts. When the enlargement of this ligand is carried out by merging the electron-withdrawing 1H-pyrrole-2,5-dione heterocycle, it enhances even more the stabilization of the LUMO due to its electron-acceptor character. Second, the analysis of the shape and composition of the orbitals involved in the band of interest indicates which substituents of the bidentate ligand and which positions are optimal for reducing the HOMO-LUMO energy gap. The introduction of electron-withdrawing substituents into the pyridine ring of the pyridocarbazole ligand mainly stabilizes the LUMO, whereas the HOMO energy increases primarily when electron-donating substituents are introduced into its indole moiety. Each type of substituents results in a bathochromic shift of the lowest-lying absorption band, which is even larger if they are combined in the same complex. Finally, the removal of the π-backbonding interaction between Re and the CO trans to the monodentate pyridine when it is replaced by phosphines PMe3, 1,4-diacetyl-1,3,7-triaza-5-phosphabicyclo[3.3.1]nonane (DAPTA), and 1,4,7-triaza-9-phosphatricyclo[5.3.2.1]tridecane (CAP) causes another extra bathochromic shift due to the destabilization of the HOMO, which is low with DAPTA, moderate with PMe3, but especially large with CAP. Through the combination of the PMe3 or CAP ligands with adequate electron-withdrawing and/or electron-donating substituents at the pyridocarbazole ligand, we have found several complexes with significant absorption at the therapeutic window. In addition, according to our results on the singlet-triplet energy gap, all of them should be able to produce cytotoxic singlet oxygen.

Prolonging the Triplet State Lifetimes of Rhenium Complexes with Imidazole-Pyridine Framework for Efficient CO2 Photoreduction

The photocatalytic reduction of CO₂ into fuels offers the prospect for creating a new CO₂ economy. Harnessing visible light-driven CO₂ -to-CO reduction mediated by the long-lived triplet excited state of rhenium(I) tricarbonyl complexes is a challenging approach. We here develop a series of new mononuclear rhenium(I) tricarbonyl complexes (Re-1-Re-4) based on the imidazole-pyridine skeleton for photo-driven CO₂ reduction. These catalysts are featured by combining pyridyl-imidazole with the aromatic ring and different pendant organic groups onto the N1 position of 1,3-imidazole unit, which display phosphorescence under Ar-saturated solution even at ambient conditions. By contrast, {Re[9-(pyren-1-yl)-10-(pyridin-2-yl)-9H-pyreno[4,5-d]imidazole)](CO)₃ Cl} (Re-4) by introducing pyrene ring at the N1 position of pyrene-fused imidazole unit exhibits superior catalytic performance with a higher turnover number for CO (TON_CO =124) and >99.9 % selectivity, primarily ascribed to the strong visible light-harvesting ability, long-lived triplet lifetimes (164.2 μs) and large reductive quenching constant. Moreover, the rhenium(I) tricarbonyl complexes derived from π-extended pyrene chromophore exhibit a long lifetime corresponding to its ligand-localized triplet state (³ IL) evidenced from spectroscopic investigations and DFT calculations.

Transition Metal Complexes as Catalysts for the Electroconversion of CO2 : An Organometallic Perspective

The electrocatalytic transformation of carbon dioxide has been a topic of interest in the field of CO2 utilization for a long time. Recently, the area has seen increasing dynamics as an alternative strategy to catalytic hydrogenation for CO2 reduction. While many studies focus on the direct electron transfer to the CO2 molecule at the electrode material, molecular transition metal complexes in solution offer the possibility to act as catalysts for the electron transfer. C1 compounds such as carbon monoxide, formate, and methanol are often targeted as the main products, but more elaborate transformations are also possible within the coordination sphere of the metal center. This perspective article will cover selected examples to illustrate and categorize the currently favored mechanisms for the electrochemically induced transformation of CO2 promoted by homogeneous transition metal complexes. The insights will be corroborated with the concepts and elementary steps of organometallic catalysis to derive potential strategies to broaden the molecular diversity of possible products.

[Re(CO)3(5-PAN)Cl], a rhenium(I) naphthalimide complex for the visible light photocatalytic reduction of CO2

A rhenium(i) naphthalimide complex [Re(CO)3(5-PAN)Cl] (Re(5-PAN); 5-PAN = 1-(1,10-phenanthroline)-4-nitro-naphthalimide) was synthesized, characterized, and evaluated as a photocatalyst for CO2 reduction. Characterization included use of MALDI-ToF mass spectrometry, FT-IR, RAMAN, 1H and 13C NMR, elemental analysis, electronic absorption and emission spectroscopy, single crystal X-ray diffraction, DFT and cyclic voltammetry. Photocatalytic (406 nm) reduction of 13CO2 to formate (H13COO) in the presence of this catalyst was tracked via13C NMR. Results support Re5-PAN (φ = 0.021) functioning as a catalyst for the reduction of CO2 (maximum turn-over 48-50 at 300 equiv. triethylamine as the sacrificial electron donor).

Tuning of Ionic Second Coordination Sphere in Evolved Rhenium Catalyst for Efficient Visible-Light-Driven CO2 Reduction

Developing an efficient and easy-to-handle strategy in designing catalysts for CO₂ reduction into CO by harnessing sunlight is a promising project. Here, a facile strategy was developed to design a Re catalyst modified with an ionic secondary coordination sphere for photoreduction of CO₂ to CO by visible light. By adding ionic liquids or tuning a different ionic secondary coordination sphere, it was discovered that an outstanding optical property, other than CO₂ absorption ability or the ability to dissociation of chloride anion, is the prerequisite for catalyst design. Accordingly, a novel Re catalyst, {Re[BpyMe(tris(2-hydroxyethyl)amine)](CO)₃ Cl}Br (Re-THEA), was designed, screened, and resulted in a relative high quantum yield (up to 34 %) for visible-light-induced CO₂ reduction with a single-molecule system. DFT calculations, combined with experimental outcomes, suggested the pendant ionic tris(2-hydroxyethyl)amino (THEA) group on Re-THEA can enhance visible-light absorption, stabilize reaction intermediates, and suppress the Re-Re dimer formation.

Immobilization of molecular catalysts for artificial photosynthesis

Artificial photosynthesis offers a way of producing fuels or high-value chemicals using a limitless energy source of sunlight and abundant resources such as water, CO2, and/or O2. Inspired by the strategies in natural photosynthesis, researchers have developed a number of homogeneous molecular systems for photocatalytic, photoelectrocatalytic, and electrocatalytic artificial photosynthesis. However, their photochemical instability in homogeneous solution are hurdles for scaled application in real life. Immobilization of molecular catalysts in solid supports support provides a fine blueprint to tackle this issue. This review highlights the recent developments in (i) techniques for immobilizing molecular catalysts in solid supports and (ii) catalytic water splitting, CO2 reduction, and O2 reduction with the support-immobilized molecular catalysts. Remaining challenges for molecular catalyst-based devices for artificial photosynthesis are discussed in the end of this review.

Ionic Liquid-Modified Porous Organometallic Polymers as Efficient and Selective Photocatalysts for Visible-Light-Driven CO2 Reduction

In the photoreduction of CO₂ to CO, the competitive H₂ evolution is always inevitable due to the approximate reduction potentials of H⁺/H₂ and CO₂/CO, which results in poor selectivity for CO production. Herein, imidazolium-type ionic liquid- (IL-) modified rhenium bipyridine-based porous organometallic polymers (Re-POMP-IL) were designed as efficient and selective photocatalysts for visible-light CO₂ photoreduction to CO based on the affinity of IL with CO₂. Photoreduction studies demonstrated that CO₂ photoreduction promoted by Re-POMP-IL functioning as the catalyst exhibits excellent CO selectivity up to 95.5% and generate 40.1 mmol CO/g of Re-POMP-IL1.0 (obtained by providing equivalent [(5,5′-divinyl-2,2′-bipyridine)Re(CO)₃Cl] and 3-ethyl-1-vinyl-1H-imidazol-3-ium bromide) at 12 h, outperforming that attained with the corresponding Re-POMP analogue without IL, which highlights the crucial role of IL. Notably, CO₂ adsorption, light harvesting, and transfer of photogenerated charges as key steps for CO₂RR were studied by employing POMPs modified with different amounts of IL as photocatalysts, among which the CO₂ affinity as an important factor for POMPs catalyzed CO₂ reduction is revealed. Overall, this work provides a practical pathway to improve the CO₂ photoreduction efficiency and CO selectivity by employing IL as a regulator.

Towards better understanding of photophysical properties of rhenium(I) tricarbonyl complexes with terpy-like ligands

Series of Re(I) carbonyls complexes were designed and synthesized to explore the impact of the triimine skeleton and number of methoxy groups attached to aryl substituents on their optoelectronic and thermal properties. The chemical structures of the prepared complexes were confirmed by ¹H and ¹³C NMR spectroscopy, HR-MS, elemental anlsysis, and X-ray measurements. DSC measuremtns showed that they melted in the range of 198-325 °C. Some of them form stable molecular glasses with high glass transition temperatures (158-173 °C). Experimentally obtained optical properties were supported by DFT calculations. The UV-Vis spectra display a series of overlapping absorption bands in the range 200-350 nm, and much weaker broad band in the visible spectral region, due to intraligand and charge transfer transitions, respectively. All synthesized complexes were emissive in solution and in solid state as powder. Moreover, when applied in diodes, some of them exhibited ability for emission of light under external voltage with maximum of electroluminescence band located at 591-630 nm.

Photoluminescence enhancement of Re(i) carbonyl complexes bearing D-A and D-π-A ligands

Three Re(i) carbonyl complexes [ReCl(CO)3(Ln)] bearing 2,2'-bipyridine, 2,2':6',2''-terpyridine, and 1,10-phenanthroline functionalized with diphenylamine/or triphenylamine units (L1-L3) were synthesized to explore the impact of highly electron donating units appended to the imine ligand on the thermal and optoelectronic properties of Re(i) systems. Additionally, for comparison, the ligands L1-3 and parent complexes [ReCl(CO)3(bipy)], [ReCl(CO)3(phen)] and [ReCl(CO)3(terpy-κ2N)] were investigated. The thermal stability was evaluated by differential scanning calorimetry. The ground- and excited-state electronic properties of the Re(i) complexes were studied by cyclic voltammetry and differential pulse voltammetry, absorption and emission spectroscopy, as well as using density-functional theory (DFT). The majority of the compounds form amorphous molecular materials with high glass transition temperatures above 100 °C. Compared to the unsubstituted complexes [ReCl(CO)3(bipy)], [ReCl(CO)3(phen)] and [ReCl(CO)3(terpy-κ2N)], the HOMO-LUMO gap of the corresponding Re(i) systems bearing modified imine ligands is reduced, and the decrease in the value of the ΔEH-L is mainly caused by the increase in HOMO energy level. In relation to the parent complexes, all designed Re(i) carbonyls were found to show enhanced photoluminescence, both in solution and in solid state. The investigated ligands and complexes were also preliminarily tested as luminophores in light emitting diodes with the structures ITO/PEDOT:PSS/compound/Al and ITO/PEDOT:PSS/PVK:PBD:compound/Al. The pronounced effect of the ligand chemical structure on electroluminescence ability was clearly visible.

Computational Insights on the Electrocatalytic Behavior of [Cp*Rh] Molecular Catalysts Immobilized on Graphene for Heterogeneous Hydrogen Evolution Reaction

The heterogeneous metal-based molecular electrocatalyst can typically exhibit attractive features compared to its homogeneous analogue including recoverability and durability. As such, it is necessary to evaluate the electrocatalytic behavior of heterogenized molecular catalysts of interest toward gaining insights concerning the retainability of such behaviors while benefiting from heterogenization. In this work, we examined computationally the electrochemical properties of nanographene-based heterogenized molecular complexes of Rhodium. We assessed, as well, the electrocatalytic behavior of the heterogenized molecular catalyst for hydrogen evolution reaction (HER). Two electrochemical pathways were examined, namely one- and two-electron electrochemical reduction pathways. Interestingly, it is computationally demonstrated that [Rh^III(Cp*)(phen)Cl]⁺-Gr can exhibit redox and electrocatalytic properties for HER that are comparable to its homogeneous analogue via a two-electron reduction pathway. On the other hand, the one-electron reduction pathway is notably found to be less favorable kinetically and thermodynamically. Furthermore, molecular insights are provided with respect to the HER employing molecular orbitals analyses and mechanistic aspects. Importantly, our findings may provide insights toward designing more efficient graphene-based molecular heterogeneous electrocatalysts for more efficient energy production.