Effect of N-phenyl substituent on thermal, optical, electrochemical and luminescence properties of 3-aminophthalimide derivatives

The seven N-phthalimide derivatives substituted with the amine group at the 3-C position in the phenylene ring were synthesized. The effect of N-substituent chemical structure was investigated. The thermal, electrochemical and optical studies were performed and supported by the density functional theory calculations (DFT). The electrochemical investigations of the synthesized low-molecular phthalimides revealed the one oxidation and reduction process with the HOMO energy level under - 5.81 eV and energy-band gap below 3 eV. The N-phthalimide derivatives were emitted light in a blue spectral region in solutions (in polar and non-polar) with the quantum yield between 2 and 68%, dependent on the substituent at the nitrogen atom, solvent and concentration. The N-phthalimide derivatives were emissive also in a solid state as a thin film and powder. They were tested as a component of the active layer with PVK:PBD matrix and as an independent active layer in the organic light-emitting diodes. The registered electroluminescence spectra exhibited the maximum emission band in the 469-505 nm range, confirming the possibility of using N-phthalimides with PVK:PBD matrix as the blue emitters.

All-Optical Data Processing with Photon-Avalanching Nanocrystalline Photonic Synapse

Data processing and storage in electronic devices are typically performed as a sequence of elementary binary operations. Alternative approaches, such as neuromorphic or reservoir computing, are rapidly gaining interest where data processing is relatively slow, but can be performed in a more comprehensive way or massively in parallel, like in neuronal circuits. Here, time-domain all-optical information processing capabilities of photon-avalanching (PA) nanoparticles at room temperature are discovered. Demonstrated functionality resembles properties found in neuronal synapses, such as: paired-pulse facilitation and short-term internal memory, in situ plasticity, multiple inputs processing, and all-or-nothing threshold response. The PA-memory-like behavior shows capability of machine-learning-algorithm-free feature extraction and further recognition of 2D patterns with simple 2 input artificial neural network. Additionally, high nonlinearity of luminescence intensity in response to photoexcitation mimics and enhances spike-timing-dependent plasticity that is coherent in nature with the way a sound source is localized in animal neuronal circuits. Not only are yet unexplored fundamental properties of photon-avalanche luminescence kinetics studied, but this approach, combined with recent achievements in photonics, light confinement and guiding, promises all-optical data processing, control, adaptive responsivity, and storage on photonic chips.

Single up-conversion nanocrystal as a local temperature probe of electrically heated silver nanowire

Luminescence thermometry is a powerful technique for monitoring temperature in a sensitive, remote (through light), and minimally invasive manner. Up to now, many macroscopic and microscopic luminescence temperature probes exploiting different temperature sensing schemes have been investigated, with the majority of the studies using aggregates of nanothermometers. This work presents isolated single up-converting NaYF₄:Er³⁺/Yb³⁺ nanocrystals as functional temperature indicators operating in a standard confocal microscopy configuration. More specifically, the nanocrystals were used to monitor the temperature of a single silver nanowire, whose temperature was controlled electrically via the Joule process. We demonstrate that individual nanocrystals placed near the nanowire can precisely determine the temperature distribution in its surroundings. These results, which combine nanoscopic heat generation with temperature readout using isolated nanocrystals, represent an essential step for the application of isolated single nanoprobes for luminescence thermometry at the nanoscale.

Six New Unsymmetrical Imino-1,8-naphthalimide Derivatives Substituted at 3-C Position-Photophysical Investigations

In this research, six novel unsymmetrical imino-1,8-naphthalimides (AzNI) were synthesized. Comprehensive thermal (thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC), optical (UV-Vis, photoluminescence), and electrochemical (CV, DPV) studies were carried out to characterize these new compounds. The molecules showed the onset of thermal decomposition in the temperature range 283-372 °C and molecular glass behavior. Imino-1,8-naphthalimides underwent reduction and oxidation processes with the electrochemical energy band gap (E_g) below 2.41 eV. The optical properties were evaluated in solvents with different polarities and in the solid-state as a thin films and binary blends with poly(N-vinylcarbazole): (2-tert-butylphenyl-5-biphenyl-1,3,4-oxadiazole) (PVK:PBD). Presented compounds emitted blue light in the solutions and in the green or violet spectral range in the solid-state. Their ability to emit light under external voltage was examined. The devices with guest-host structure emitted light with the maximum located in the blue to red spectral range of the electroluminescence band (EL) depending on the content of the AzNI in the PVK:PBD matrix (guest-host structure).

Controlling of Photophysical Behavior of Rhenium(I) Complexes with 2,6-Di(thiazol-2-yl)pyridine-Based Ligands by Pendant π-Conjugated Aryl Groups

The structure–property correlations and control of electronic excited states in transition metal complexes (TMCs) are of high significance for TMC-based functional material development. Within these studies, a series of Re(I) carbonyl complexes with aryl-substituted 2,6-di(thiazol-2-yl)pyridines (Arⁿ-dtpy) was synthesized, and their ground- and excited-state properties were investigated. A number of condensed aromatic rings, which function as the linking mode of the aryl substituent, play a fundamental role in controlling photophysics of the resulting [ReCl(CO)₃(Arⁿ-dtpy-κ²N)]. Photoexcitation of [ReCl(CO)₃(Arⁿ-dtpy-κ²N)] with 1-naphthyl-, 2-naphthyl-, 9-phenanthrenyl leads to the population of ³MLCT. The lowest triplet state of Re(I) chromophores bearing 9-anthryl, 2-anthryl, 1-pyrenyl groups is ligand localized. The rhenium(I) complex with appended 1-pyrenyl group features long-lived room temperature emission attributed to the equilibrium between ³MLCT and ³IL/³ILCT. The excited-state dynamics in complexes [ReCl(CO)₃(9-anthryl-dtpy-κ²N)] and [ReCl(CO)₃(2-anthryl-dtpy-κ²N)] is strongly dependent on the electronic coupling between anthracene and {ReCl(CO)₃(dtpy-κ²N)}. Less steric hindrance between the chromophores in [ReCl(CO)₃(2-anthryl-dtpy-κ²N)] is responsible for the faster formation of ³IL/³ILCT and larger contribution of ³ILCT_{anthracene→dtpy} in relation to the isomeric complex [ReCl(CO)₃(9-anthryl-dtpy-κ²N)]. In agreement with stronger electronic communication between the aryl and Re(I) coordination centre, [ReCl(CO)₃(2-anthryl-dtpy-κ²N)] displays room-temperature emission contributed to by ³MLCT and ³IL_anthracene/³ILCT_{anthracene→dtpy} phosphorescence. The latter presents rarely observed phenomena in luminescent metal complexes.

Impact of the Anthryl Linking Mode on the Photophysics and Excited-State Dynamics of Re(I) Complexes [ReCl(CO)3(4′-An-terpy-κ2N)]

Rhenium(I) complexes with 2,2′:6′,2″-terpyridines (terpy) substituted with 9-anthryl (1) and 2-anthryl (2) were synthesized, and the impact of the anthryl linking mode on the ground- and excited-state properties of resulting complexes [ReCl(CO)₃(4′-An-terpy-κ²N)] (An—anthryl) was investigated using a combination of steady-state and time-resolved optical techniques accompanied by theoretical calculations. Different attachment positions of anthracene modify the overlap between the molecular orbitals and thus the electronic coupling of the anthracene and {ReCl(CO)₃(terpy-κ²N)} chromophores. Following the femtosecond transient absorption, the lowest triplet excited state of both complexes was found to be localized on the anthracene chromophore. The striking difference between 1 and 2 concerns the triplet-state formation dynamics. A more planar geometry of 2-anthryl-terpy (2), and thus better electronic communication between the anthracene and {ReCl(CO)₃(terpy-κ²N)} chromophores, facilitates the formation of the ³An triplet state. In steady-state photoluminescence spectra, the population ratio of ³MLCT and ³An was found to be dependent not only on the anthryl linking mode but also on solvent polarity and excitation wavelengths. In dimethyl sulfoxide (DMSO), compounds 1 and 2 excited with λ_exc > 410 nm show both ³MLCT and ³An emissions, which are rarely observed. Additionally, the abilities of the designed complexes for ¹O₂ generation and light emission under the external voltage were preliminary examined.

The impact of the anthryl linking mode on the ground- and excited-state properties of [ReCl(CO)₃(4′-An-terpy-κ²N)] with 2,2′:6′,2″-terpyridines (terpy) substituted with 9-anthryl (1) and 2-anthryl (2) was thoroughly investigated. Different attachment positions of anthracene were evidenced to modify the overlap between the molecular orbitals and electronic coupling of the anthracene and {ReCl(CO)₃(terpy-κ²N)} chromophores and thus the optical properties of the resulting complexes. The striking difference between 1 and 2 was demonstrated in the triplet-state formation dynamics.

In-Depth Studies of Ground- and Excited-State Properties of Re(I) Carbonyl Complexes Bearing 2,2':6',2″-Terpyridine and 2,6-Bis(pyrazin-2-yl)pyridine Coupled with π-Conjugated Aryl Chromophores

In the current work, comprehensive photophysical and electrochemical studies were performed for eight rhenium(I) complexes incorporating 2,2':6',2″-terpyridine (terpy) and 2,6-bis(pyrazin-2-yl)pyridine (dppy) with appended 1-naphthyl-, 2-naphthyl-, 9-phenanthrenyl, and 1-pyrenyl groups. Naphthyl and phenanthrenyl substituents marginally affected the energy of the MLCT absorption and emission bands, signaling a weak electronic coupling of the appended aryl group with the Re(I) center. The triplet MLCT state in these complexes is so low lying relative to the triplet ³IL_aryl that the thermal population of the triplet excited state delocalized on the organic chromophore is ineffective. The attachment of the electron-rich pyrenyl group resulted in a noticeable red shift and a significant increase in molar absorption coefficients of the lowest energy absorption of the resulting Re(I) complexes due to the contribution of intraligand charge-transfer (ILCT) transitions occurring from the pyrenyl substituent to the terpy/dppy core. At 77 K, the excited states of [ReCl(CO)₃(Lⁿ-κ²N)] with 1-pyrenyl-functionalized ligands were found to have predominant ³IL_pyrene/³ILCT_{pyrene→terpy} character. The ³IL/³ILCT nature of the lowest energy excited state of [ReCl(CO)₃(4'-(1-pyrenyl)-terpy-κ²N)] was also evidenced by nanosecond transient absorption and time-resolved emission spectroscopy. Enhanced room-temperature emission lifetimes of the complexes [ReCl(CO)₃(Lⁿ-κ²N)] with 1-pyrenyl-substituted ligands are indicative of the thermal activation between ³MLCT and ³IL/³ILCT excited states. Deactivation pathways occurring upon light excitation in [ReCl(CO)₃(4'-(1-naphthyl)-terpy-κ²N)] and [ReCl(CO)₃(4'-(1-pyrenyl)-terpy-κ²N)] were determined by femtosecond transient absorption studies.

Luminescence and Electrochemical Activity of New Unsymmetrical 3-Imino-1,8-naphthalimide Derivatives

A new series of 1,8-naphtalimides containing an imine bond at the 3-position of the naphthalene ring was synthesized using 1H, 13C NMR, FTIR, and elementary analysis. The impact of the substituent in the imine linkage on the selected properties and bioimaging of the synthesized compounds was studied. They showed a melting temperature in the range of 120-164 °C and underwent thermal decomposition above 280 °C. Based on cyclic and differential pulse voltammetry, the electrochemical behavior of 1,8-naphtalimide derivatives was evaluated. The electrochemical reduction and oxidation processes were observed. The compounds were characterized by a low energy band gap (below 2.60 eV). Their photoluminescence activities were investigated in solution considering the solvent effect, in the aggregated and thin film, and a mixture of poly(N-vinylcarbazole) (PVK) and 2-tert-butylphenyl-5-biphenyl-1,3,4-oxadiazole (PBD) (50:50 wt.%). They demonstrated low emissions due to photoinduced electron transport (PET) occurring in the solution and aggregation, which caused photoluminescence quenching. Some of them exhibited light emission as thin films. They emitted light in the range of 495 to 535 nm, with photoluminescence quantum yield at 4%. Despite the significant overlapping of its absorption range with emission of the PVK:PBD, incomplete Förster energy transfer from the matrix to the luminophore was found. Moreover, its luminescence ability induced by external voltage was tested in the diode with guest-host configuration. The possibility of compound hydrolysis due to the presence of the imine bond was also discussed, which could be of importance in biological studies that evaluate 3-imino-1,8-naphatalimides as imaging tools and fluorescent materials for diagnostic applications and molecular bioimaging.

Multimodal polymer encapsulated CdSe/Fe3O4 nanoplatform with improved biocompatibility for two-photon and temperature stimulated bioapplications

Multimodal polymer encapsulated CdSe/Fe₃O₄ nanoplatforms with dual optical and magnetic properties have been fabricated. We demonstrate that CdSe/Fe₃O₄ nanocapsules (NCs) upon excitation with UV radiation or NIR fs-laser excitation exhibit intense one- or two-photon emission at 535 nm, whereas the combination of an alternating magnetic field and 808 nm IR laser excitation results in heat generation. Since anticancer therapies require relatively high doses of Fe₃O₄ nanoparticles (NPs) to induce biologically relevant temperature jumps, the therapeutic effects of 0.1 and 1 mg/mL Fe₃O₄ NCs and CdSe/Fe₃O₄ NCs were investigated using breast cancer cell lines, ER-positive MCF-7, and triple-negative MDA-MB-231 cells. Improved biocompatibility of CdSe/Fe₃O₄ NCs compared to Fe₃O₄ NCs was revealed at higher NCs concentration suggesting safe potential medical applications of CdSe/Fe₃O₄ NCs. In contrast, 1 mg/mL Fe₃O₄ NCs were found to be more cytotoxic to MDA-MB-231 than MCF-7 cells through iron-induced oxidative stress, lipid peroxidation, and concomitant ferroptotic cell death. We believe that Fe₃O₄ NCs-mediated cellular response may be heterogeneous that reflects, at least in part, cancer cell genotype, molecular phenotype, and pathological classification.

New Acceptor-Donor-Acceptor Systems Based on Bis-(Imino-1,8-Naphthalimide)

In this paper, six novel symmetrical bis-(imino-1,8-naphthalimides) differing in core and N-substituent structure were synthesized, and their thermal (TGA, DSC), optical (UV-Vis, PL), electrochemical (DPV, CV) properties were evaluated. The compounds were stable to 280 °C and could be transferred into amorphous materials. Electrochemical investigations showed their ability to occur reductions and oxidations processes. They exhibited deep LUMO levels of about -3.22 eV and HOMO levels above -5.80 eV. The optical investigations were carried out in the solutions (polar and non-polar) and in films and blends with PVK:PBD. Bis-(imino-1,8-naphthalimides) absorbed electromagnetic radiation in the range of 243-415 nm and emitted light from blue to yellow. Their capacity for light emission under voltage was preliminarily tested in devices with an active layer consisting of a neat compound and a blend with PVK:PBD. The diodes emitted green or red light.

Carbazole effect on ground- and excited-state properties of rhenium(i) carbonyl complexes with extended terpy-like ligands

The ground- and excited-state properties of three novel complexes [ReCl(CO)₃(Lⁿ-κ²N)] bearing 2,2':6',2''-terpyridine, 2,6-di(thiazol-2-yl)pyridine and 2,6-di(pyrazin-2-yl)pyridine functionalized with 9-carbazole attached to the central pyridine ring of the triimine core via phenylene linkage were investigated by spectroscopic and electrochemical methods and were simulated using density functional theory (DFT) and time-dependent DFT. To get a deeper and broader understanding of structure-property relationships, the designed Re(i) carbonyl complexes were compared with previously reported analogous systems - without any groups attached to the phenyl ring and bearing pyrrolidine instead of 9-carbazole. The results indicated that attachment of the N-carbazolyl substituent to the triimine core has less influence on the nature of the triplet excited state of [ReCl(CO)₃(Lⁿ-κ²N)] than the pyrrolidine group. Additionally, the impact of the ligand structural modifications on the light emission of the Re(i) complexes under external voltage was preliminarily examined with electroluminescence spectra of diodes containing the synthesized new molecules in an active layer.

Controlling plasmon propagation and enhancement via reducing agent in wet chemistry synthesized silver nanowires

Silver nanowires with varying diameters and submillimeter lengths were obtained by changing a reducing agent used during hydrothermal synthesis. The control over the nanowire diameter turns out to play a critical role in determining their plasmonic properties, including fluorescence enhancement and surface plasmon polariton propagation. Advanced fluorescence imaging of hybrid nanostructures assembled of silver nanowires and photoactive proteins indicates longer propagation lengths for nanowires featuring larger diameters. At the same time, with increasing diameter of the nanowires, we measure a substantial reduction of fluorescence enhancement. The results point at possible ways to control the influence of plasmon excitations in silver nanowires by tuning their morphology.

Two-photon microperimetry with picosecond pulses

Two-photon vision is a phenomenon associated with the perception of short pulses of near-infrared radiation (900-1200 nm) as a visible light. It is caused by the nonlinear process of two-photon absorption by visual pigments. Here we present results showing the influence of pulse duration and repetition rate of short pulsed lasers on the visual threshold. We compared two-photon sensitivity maps of the retina obtained for subjects with normal vision using a cost-effective fiber laser (λc  = 1028.4 nm, τp  = 12.2 ps, Frep  = 19.17 MHz) and a solid-state laser (λc  = 1043.3 nm, τp  = 0.253 ps, Frep  = 62.65 MHz). We have shown that in accordance with the description of two-photon absorption, the average optical power required for two-photon vision for a fiber laser is 4 times greater than that for a solid-state laser. Mean sensitivity measured for the first one is 5.9 ± 2.8 dB lower than for the second but still 17 dB away from the safety limit, confirming that picosecond light sources can be successfully applied in microperimetry. This development would dramatically reduce the cost and complexity of future clinical devices.

Real-time fluorescence sensing of single photoactive proteins using silver nanowires

We demonstrate that single functionalized silver nanowires form a geometric platform suitable for efficient real-time detection of single photoactive proteins. By collecting series of images using wide-field fluorescence microscopy, events of single protein attachment can be distinguished with the signal to noise ratio further improved by fluorescence enhancement due to plasmon excitations in the nanowires. The enhancement is evidenced by strong shortening of the fluorescence decay of single photoactive proteins conjugated to the silver nanowires.

Towards better understanding of photophysical properties of rhenium(I) tricarbonyl complexes with terpy-like ligands

Series of Re(I) carbonyls complexes were designed and synthesized to explore the impact of the triimine skeleton and number of methoxy groups attached to aryl substituents on their optoelectronic and thermal properties. The chemical structures of the prepared complexes were confirmed by ¹H and ¹³C NMR spectroscopy, HR-MS, elemental anlsysis, and X-ray measurements. DSC measuremtns showed that they melted in the range of 198-325 °C. Some of them form stable molecular glasses with high glass transition temperatures (158-173 °C). Experimentally obtained optical properties were supported by DFT calculations. The UV-Vis spectra display a series of overlapping absorption bands in the range 200-350 nm, and much weaker broad band in the visible spectral region, due to intraligand and charge transfer transitions, respectively. All synthesized complexes were emissive in solution and in solid state as powder. Moreover, when applied in diodes, some of them exhibited ability for emission of light under external voltage with maximum of electroluminescence band located at 591-630 nm.

Photoluminescence enhancement of Re(i) carbonyl complexes bearing D-A and D-π-A ligands

Three Re(i) carbonyl complexes [ReCl(CO)3(Ln)] bearing 2,2'-bipyridine, 2,2':6',2''-terpyridine, and 1,10-phenanthroline functionalized with diphenylamine/or triphenylamine units (L1-L3) were synthesized to explore the impact of highly electron donating units appended to the imine ligand on the thermal and optoelectronic properties of Re(i) systems. Additionally, for comparison, the ligands L1-3 and parent complexes [ReCl(CO)3(bipy)], [ReCl(CO)3(phen)] and [ReCl(CO)3(terpy-κ2N)] were investigated. The thermal stability was evaluated by differential scanning calorimetry. The ground- and excited-state electronic properties of the Re(i) complexes were studied by cyclic voltammetry and differential pulse voltammetry, absorption and emission spectroscopy, as well as using density-functional theory (DFT). The majority of the compounds form amorphous molecular materials with high glass transition temperatures above 100 °C. Compared to the unsubstituted complexes [ReCl(CO)3(bipy)], [ReCl(CO)3(phen)] and [ReCl(CO)3(terpy-κ2N)], the HOMO-LUMO gap of the corresponding Re(i) systems bearing modified imine ligands is reduced, and the decrease in the value of the ΔEH-L is mainly caused by the increase in HOMO energy level. In relation to the parent complexes, all designed Re(i) carbonyls were found to show enhanced photoluminescence, both in solution and in solid state. The investigated ligands and complexes were also preliminarily tested as luminophores in light emitting diodes with the structures ITO/PEDOT:PSS/compound/Al and ITO/PEDOT:PSS/PVK:PBD:compound/Al. The pronounced effect of the ligand chemical structure on electroluminescence ability was clearly visible.

Photochemical Printing of Plasmonically Active Silver Nanostructures

In this paper, we demonstrate plasmonic substrates prepared on demand, using a straightforward technique, based on laser-induced photochemical reduction of silver compounds on a glass substrate. Importantly, the presented technique does not impose any restrictions regarding the shape and length of the metallic pattern. Plasmonic interactions have been probed using both Stokes and anti-Stokes types of emitters that served as photoluminescence probes. For both cases, we observed a pronounced increase of the photoluminescence intensity for emitters deposited on silver patterns. By studying the absorption and emission dynamics, we identified the mechanisms responsible for emission enhancement and the position of the plasmonic resonance.

Immunosensor Based on Long-Period Fiber Gratings for Detection of Viruses Causing Gastroenteritis

Since the norovirus is the main cause of acute gastroenteritis all over the world, its fast detection is crucial in medical diagnostics. In this work, a rapid, sensitive, and selective optical fiber biosensor for the detection of norovirus virus-like particles (VLPs) is reported. The sensor is based on highly sensitive long-period fiber gratings (LPFGs) coated with antibodies against the main coat protein of the norovirus. Several modification methods were verified to obtain reliable immobilization of protein receptors on the LPFG surface. We were able to detect 1 ng/mL norovirus VLPs in a 40-min assay in a label-free manner. Thanks to the application of an optical fiber as the sensor, there is a possibility to increase the user’s safety by separating the measurement point from the signal processing setup. Moreover, our sensor is small and light, and the proposed assay is straightforward. The designed LPFG-based biosensor could be applied in both fast norovirus detection and in vaccine testing.

Giant Fine Structure Splitting of the Bright Exciton in a Bulk MAPbBr3 Single Crystal

Exciton fine structure splitting in semiconductors reflects the underlying symmetry of the crystal and quantum confinement. Because the latter factor strongly enhances the exchange interaction, most work has focused on nanostructures. Here, we report on the first observation of the bright exciton fine structure splitting in a bulk semiconductor crystal, where the impact of quantum confinement can be specifically excluded, giving access to the intrinsic properties of the material. Detailed investigation of the exciton photoluminescence and reflection spectra of a bulk methylammonium lead tribromide single crystal reveals a zero magnetic field splitting as large as ∼200 μeV. This result provides an important starting point for the discussion of the origin of the large bright exciton fine structure splitting observed in perovskite nanocrystals.

Thermal, spectroscopic, electrochemical, and electroluminescent characterization of malononitrile derivatives with triphenylamine structure

Three push-pull molecules with linear, quadrupolar and tripodal arrangements, consisting of triphenylamine (electro-donor) substituted with malononitrile groups (electro-acceptor), were synthesized with high yield by a simple procedure. Impact of the number of malononitrile substituents on optoelectronic properties was investigated with cyclic voltammetry, absorption and emission spectroscopy, as well as density functional theory calculation. The derivatives formed amorphous materials and exhibited low energy band gaps ranging from 2.06 to 2.49 eV. UV-Vis absorption and photoluminescence emission spectra were investigated in solutions (CHCl₃, NMP) and in solid-state as thin films and two kinds of blends (with PMMA and PVK:PBD). Quantum yield of photoluminescence was dependent on the molecule structure, solvent, and solid-state layer formulation. The compounds exhibited high photoluminescence quantum yield in the range of 15-42% and 12-59% in solid-state as film and blend with PMMA (1 wt%), respectively, being promising for applications in light emitting diodes. The diodes with active layer consisting of neat derivatives and compounds molecularly dispersed in PVK:PBD (50:50 wt%) matrix showed orange and green electroluminescence.

NCN-Coordinating Ligands based on Pyrene Structure with Potential Application in Organic Electronics

Five novel derivatives of pyrene, substituted at positions 1,3,6,8 with 4-(2,2-dimethylpropyloxy)pyridine (P1), 4-decyloxypyridine (P2), 4-pentylpyridine (P3), 1-decyl-1,2,3-triazole (P4), and 1-benzyl-1,2,3-triazole (P5), are obtained through a Suzuki-Miyaura cross-coupling reaction or Cu^I -catalyzed 1,3-dipolar cycloaddition reaction, respectively, and characterized thoroughly. TGA measurements reveal the high thermal stability of the compounds. Pyrene derivatives P1-P5 all show photoluminescence (PL) quantum yields (Φ) of approximately 75 % in solution. Solid-state photo- and electroluminescence characteristics of selected compounds as organic light-emitting diodes are tested. In the guest-host configuration, two matrixes, that is, poly(N-vinylcarbazole) (PVK) and a binary matrix consisting of PVK and 2-tert-butylphenyl-5-biphenyl-1,3,4-oxadiazole (PBD) (50:50 wt %), are applied. The diodes show red, green, or blue electroluminescence, depending on both the compound chemical structure and the actual device architecture. In addition, theoretical studies (DFT and TD-DFT) provide a deeper understanding of the experimental results.

Spectral Selectivity of Plasmonic Interactions between Individual Up-Converting Nanocrystals and Spherical Gold Nanoparticles

We experimentally demonstrate strong spectral selectivity of plasmonic interaction that occurs between α-NaYF₄:Er3+/Yb3+ nanocrystals, which feature two emission bands, and spherical gold nanoparticles, with plasmon frequency resonant with one of the emission bands. Spatially-resolved luminescence intensity maps acquired for individual nanocrystals, together with microsecond luminescence lifetime images, show two qualitatively different effects that result from the coupling between plasmon excitations in metallic nanoparticles and emitting states of the nanocrystals. On the one hand, we observe nanocrystals, whose emission intensity is strongly enhanced for both resonant and non-resonant bands with respect to the plasmon resonance. Importantly, this increase is accompanied with shortening of luminescence decays times. In contrast, a significant number of nanocrystals exhibits almost complete quenching of the emission resonant with the plasmon resonance of gold nanoparticles. Theoretical analysis indicates that such an effect can occur for emitters placed at distances of about 5 nm from gold nanoparticles. While under these conditions, both transitions experience significant increases of the radiative emission rates due to the Purcell effect, the non-radiative energy transfer between resonant bands results in strong quenching, which in that situation nullifies the enhancement.

Plasmon-induced absorption of blind chlorophylls in photosynthetic proteins assembled on silver nanowires

We demonstrate that controlled assembly of eukaryotic photosystem I with its associated light harvesting antenna complex (PSI-LHCI) on plasmonically active silver nanowires (AgNWs) substantially improves the optical functionality of such a novel biohybrid nanostructure. By comparing fluorescence intensities measured for PSI-LHCI complex randomly oriented on AgNWs and the results obtained for the PSI-LHCI/cytochrome c₅₅₃ (cyt c₅₅₃) bioconjugate with AgNWs we conclude that the specific binding of photosynthetic complexes with defined uniform orientation yields selective excitation of a pool of chlorophyll (Chl) molecules that are otherwise almost non-absorbing. This is remarkable, as this study shows for the first time that plasmonic excitations in metallic nanostructures can not only be used to enhance native absorption of photosynthetic pigments, but also - by employing cyt c₅₅₃ as the conjugation cofactor - to activate the specific Chl pools as the absorbing sites only when the uniform and well-defined orientation of PSI-LHCI with respect to plasmonic nanostructures is achieved. As absorption of PSI alone is comparatively low, our approach lends itself as an innovative approach to outperform the reported-to-date biohybrid devices with respect to solar energy conversion.

Synthesis, spectroscopic, electrochemical and computational studies of rhenium(i) tricarbonyl complexes based on bidentate-coordinated 2,6-di(thiazol-2-yl)pyridine derivatives

The impact of structure modification of the 2,6-di(thiazol-2-yl)pyridine based ligand was investigated.

Tip-enhanced Raman spectroscopy of bradykinin and its B2 receptor antagonists adsorbed onto colloidal suspended Ag nanowires

The tip-enhanced Raman scattering (TERS) spectra of bradykinin (BK) and its potent B2 BK receptor antagonists, [d-Arg(0),Hyp(3),Thi(5,8),l-Pip(7)]BK and [d-Arg(0),Hyp(3),Thi(5),d-Phe(7),l-Pip(8)]BK, approximately with a size of about 40 nm, adsorbed onto colloidal suspended Ag nanowires with diameter in the range of 350-500 nm and length of 2-50 μm were recorded. The metal surface plasmon resonance and morphology of the Ag nanowires were studied by ultraviolet-visible (UV-Vis) spectroscopy and scanning electron microscopy (SEM). Briefly, it was shown that two C-terminal amino acids of BK and [d-Arg(0),Hyp(3),Thi(5,8),l-Pip(7)]BK are involved in the interaction with the colloidal suspended Ag nanowire surface, whereas three last amino acids of the [d-Arg(0),Hyp(3),Thi(5),d-Phe(7),l-Pip(8)]BK sequence attached the Ag surface. Thus, BK adsorbs on the colloidal suspended Ag nanowires mainly through the Phe(5/8) ring (tilted orientation) and the one oxygen atom of the carboxylate group and the H2N-C-NH-CH2- fragment of Arg(9). In the case of [d-Arg(0),Hyp(3),Thi(5,8),l-Pip(7)]BK, the Thi(8) ring (through the lone electron pair on the sulfur atom) and the both oxygen atoms of the carboxylate group and the amine group of Arg(9) mainly participated in the interaction with the Ag nanowire surface. For [d-Arg(0),Hyp(3),Thi(5),d-Phe(7),l-Pip(8)]BK, the d-Phe(7) ring, the Pip(8) ring, and the Arg(9) side-chain assisted in the peptide interaction with the Ag surface. The obtained results emphasize the importance of the C-terminal part of these peptides in the adsorption process onto the colloidal suspended Ag nanowires.

Upconverting/magnetic: Gd2O3:(Er3+,Yb3+,Zn2+) nanoparticles for biological applications: effect of Zn2+ doping

Upconverting/paramagnetic Gd₂O₃:1% Er³⁺, 18% Yb³⁺ with Zn²⁺ nanoparticles (NPs) permits one to perform optical imaging.

PsbS is required for systemic acquired acclimation and post-excess-light-stress optimization of chlorophyll fluorescence decay times in Arabidopsis

Systemic acquired acclimation (SAA) is an important light acclimatory mechanism that depends on the global adjustments of non-photochemical quenching and chloroplast retrograde signaling. As the exact regulation of these processes is not known, we measured time-resolved fluorescence of chlorophyll a in Arabidopsis thaliana leaves exposed to excess light, in leaves undergoing SAA, and in leaves after excess light episode. We compare the behavior induced in wild-type plants with null mutant of non-photochemical quenching (npq4-1). The wild type rosettes exhibit a small reduction of fluorescence decay times in leaves directly exposed to excess light and in leaves undergoing SAA in ambient low light. However in npq4-1 exposition to excess light results in much faster fluorescence decay, which is insensitive to excitation power. At the same time npq4-1 leaves undergoing SAA displayed intermediate fluorescence decay. The npq4-1 plants also lost the ability to optimize florescence decay, and thus chlorophyll a dynamics up to 2 h after excess light episode. The fluorescence decay dynamics in both WT and npq4-1 can be described by a set of 3 maximum decay times. Based on the results, we concluded that functional PsbS is required for optimization of absorbed photon fate and optimal light acclimatory responses such as SAA or after excess light stress.

Lesion simulating disease1, enhanced disease susceptibility1, and phytoalexin deficient4 conditionally regulate cellular signaling homeostasis, photosynthesis, water use efficiency, and seed yield in Arabidopsis

There is growing evidence that for a comprehensive insight into the function of plant genes, it is crucial to assess their functionalities under a wide range of conditions. In this study, we examined the role of lesion simulating disease1 (LSD1), enhanced disease susceptibility1 (EDS1), and phytoalexin deficient4 (PAD4) in the regulation of photosynthesis, water use efficiency, reactive oxygen species/hormonal homeostasis, and seed yield in Arabidopsis (Arabidopsis thaliana) grown in the laboratory and in the field. We demonstrate that the LSD1 null mutant (lsd1), which is known to exhibit a runaway cell death in nonpermissive conditions, proves to be more tolerant to combined drought and high-light stress than the wild type. Moreover, depending on growing conditions, it shows variations in water use efficiency, salicylic acid and hydrogen peroxide concentrations, photosystem II maximum efficiency, and transcription profiles. However, despite these changes, lsd1 demonstrates similar seed yield under all tested conditions. All of these traits depend on EDS1 and PAD4. The differences in the pathways prevailing in the lsd1 in various growing environments are manifested by the significantly smaller number of transcripts deregulated in the field compared with the laboratory, with only 43 commonly regulated genes. Our data indicate that LSD1, EDS1, and PAD4 participate in the regulation of various molecular and physiological processes that influence Arabidopsis fitness. On the basis of these results, we emphasize that the function of such important regulators as LSD1, EDS1, and PAD4 should be studied not only under stable laboratory conditions, but also in the environment abounding in multiple stresses.

Zn(1-x)Mg(x)Te nanowires grown by solid source molecular beam epitaxy

This paper reports on the epitaxial growth of single-crystalline ternary Zn(1-x)Mg(x)Te nanowires covering a broad compositional range of molar fraction 0≤x≤0.75. The nanowires were grown on (100), (110), and (111) GaAs substrates using a vapor-liquid-solid mechanism. Solid source molecular beam epitaxy and an Au-based nanocatalyst were used for these purposes. The composition of nanowires can be adjusted by changing the ratio of Mg to Zn molecular beam fluxes. Electron microscopy images show that the nanowires are smooth and slightly tapered. The diameters of the obtained nanowires are from 30 to 70 nm and their length is around 1 µm. X-ray diffraction analysis and transmission electron microscopy reveal that the nanowires have a zinc-blende structure throughout the whole range of obtained compositions, and have a [Formula: see text] growth axis. The Raman measurements reveal both the expected splitting and shift of phonon lines with increasing Mg content, thus proving the substitutional incorporation of Mg into metallic sites of the ZnTe lattice.