Cooperative defect-enriched SiO2 for oxygen activation and organic dehydrogenation

Investigation on the Mechanism of PAL (100) Surface Modified by APTES

The interfacial mechanism has always been a concern for 3-aminopropyltriethoxysilane (APTES)-grafted palygorskite (PAL). In this research, the mechanism of graft modification for grafting of APTES to the surface of PAL (100) was studied using density functional theory (DFT) calculation. The results illustrated that different grafting states of the APTES influence the inter- and intramolecular interactions between APTES/PAL (100), which are reflected in the electronic structures. For single-, double-, and three-toothed state APTES-PAL (100), the charge transfer rates from the PAL (100) surface to APTES were 0.68, 1.02, and 0.77 e, respectively. The binding energy results show that PAL (100) modification performance in the double-tooth state is the best compared to the other states, with the lowest value of -181.91 kJ/mol. The double-toothed state has lower barrier energy (94.69, 63.11, and 153.67 kJ/mol) during the modification process. This study offers theoretical insights into the chemical modification of the PAL (100) surface using APTES coupling agents, and can provide a guide for practical applications.

Recent Advances in Photocatalytic Oxidation of Methane to Methanol

Methane is one of the promising alternatives to non-renewable petroleum resources since it can be transformed into added-value hydrocarbon feedstocks through suitable reactions. The conversion of methane to methanol with a higher chemical value has recently attracted much attention. The selective oxidation of methane to methanol is often considered a “holy grail” reaction in catalysis. However, methanol production through the thermal catalytic process is thermodynamically and economically unfavorable due to its high energy consumption, low catalyst stability, and complex reactor maintenance. Photocatalytic technology offers great potential to carry out unfavorable reactions under mild conditions. Many in-depth studies have been carried out on the photocatalytic conversion of methane to methanol. This review will comprehensively provide recent progress in the photocatalytic oxidation of methane to methanol based on materials and engineering perspectives. Several aspects are considered, such as the type of semiconductor-based photocatalyst (tungsten, titania, zinc, etc.), structure modification of photocatalyst (doping, heterojunction, surface modification, crystal facet re-arrangement, and electron scavenger), factors affecting the reaction process (physiochemical characteristic of photocatalyst, operational condition, and reactor configuration), and briefly proposed reaction mechanism. Analysis of existing challenges and recommendations for the future development of photocatalytic technology for methane to methanol conversion is also highlighted.

Engineering Multidefects on Cex Si1- x O2- δ Nanocomposites for the Catalytic Ozonation Reaction

Herein, it is shown that by engineering defects on Ce_x Si_{1- x} O_{2- δ} nanocomposites synthesized via flame spray pyrolysis, oxygen vacancies can be created with an increased density of trapped electrons, enhancing the formation of reactive oxygen species (ROSs) and hydroxyl radicals in an ozone-filled environment. Spectroscopic analysis and density functional theory calculations indicate that two-electron oxygen vacancies (O_V ⁰ ) or peroxide species, and their degree of clustering, play a critical role in forming reactive radicals. It is also found that a higher Si content in the binary oxide imposes a high O_V ⁰ ratio and, consequently, higher catalytic activity. Si inclusion in the nanocomposite appears to stabilize the surface oxygen vacancies as well as increase the reactive electron density at these sites. A mechanistic study on effective ROSs generated during catalytic ozonation reveals that the hydroxyl radical is the most effective ROS for organic degradation and is formed primarily through H₂ O₂ generation in the presence of the O_V ⁰ . Examining the binary oxides offers insights on the contribution of oxygen vacancies and their state of charge to catalytic reactions, in this instance for the catalytic ozonation of organic compounds.

Modulating catalytic oxygen activation over Pt–TiO2/SiO2 catalysts by defect engineering of a TiO2/SiO2 support

Defect sites (comprising Ti3+ and NBOHC) and oxygen adsorbed on a Pt surface (PtOads) boost catalytic oxygen activation on a Pt/TiO2–SiO2 catalyst.

Technology Advances in Phenol Removals: Current Progress and Future Perspectives

Phenol acts as a pollutant even at very low concentrations in water. It is classified as one of the main priority pollutants that need to be treated before being discharged into the environment. If phenolic-based compounds are discharged into the environment without any treatments, they pose serious health risks to humans, animals, and aquatic systems. This review emphasizes the development of advanced technologies for phenol removal. Several technologies have been developed to remove phenol to prevent environmental pollution, such as biological treatment, conventional technologies, and advanced technologies. Among these technologies, heterogeneous catalytic ozonation has received great attention as an effective, environmentally friendly, and sustainable process for the degradation of phenolic-based compounds, which can overcome some of the disadvantages of other technologies. Recently, zeolites have been widely used as one of the most promising catalysts in the heterogeneous catalytic ozonation process to degrade phenol and its derivatives because they provide a large specific surface area, high active site density, and excellent shape-selective properties as a catalyst. Rational design of zeolite-based catalysts with various synthesis methods and pre-defined physiochemical properties including framework, ratio of silica to alumina (SiO2/Al2O3), specific surface area, size, and porosity, must be considered to understand the reaction mechanism of phenol removal. Ultimately, recommendations for future research related to the application of catalytic ozonation technology using a zeolite-based catalyst for phenol removal are also described.

Role of defects on TiO2/SiO2 composites for boosting photocatalytic water splitting

Defect engineering of semiconductor photocatalysts is considered as an evolving strategy to adjust their physiochemical properties and boost photoreactivity of the materials. Here, hydrogenation and UV light pre-treatment of TiO₂/SiO₂ composite with the ratio of 9 : 1 (9TiO₂/1SiO₂) were conducted to generate Ti³⁺ and non-bridging oxygen holes center (NBOHC) defects, respectively. The 9TiO₂/1SiO₂ composite exhibited much higher photocatalytic water splitting than neat TiO₂ and SiO₂ as a consequence of the electronic structure effects induced by the defect sites. Electron paramagnetic resonance (EPR) indicated that hydrogenated and UV light pre-treated of 9TiO₂/1SiO₂ boosted a higher density of Ti³⁺ and NBOHC defect which could serve to suppress photogenerated electron-hole pair recombination and act as shallow donors to trap photoexcited electron. Overall, both defect sites in 9TiO₂/1SiO₂ delivered advantageous characteristic relative to neat TiO₂ and SiO₂ with the finding clearly illustrating the value of defect engineering in enhancing photocatalytic performance.

Plasma Treating Mixed Metal Oxides to Improve Oxidative Performance via Defect Generation

The generation of structural defects in metal oxide catalysts offers a potential pathway to improve performance. Herein, we investigated the effect of thermal hydrogenation and low-temperature plasma treatments on mixed SiO₂/TiO₂ materials. Hydrogenation at 500 °C resulted in the reduction of the material to produce Ti³⁺ in the bulk TiO₂. In contrast, low temperature plasma treatment for 10 or 20 min generated surface Ti³⁺ species via the removal of oxygen on both the neat and hydrogenated material. Assessing the photocatalytic activity of the materials demonstrated a 40–130% increase in the rate of formic acid oxidation after plasma treatment. A strong relationship between the Ti³⁺ content and catalyst activity was established, although a change in the Si–Ti interaction after plasma treating of the neat SiO₂/TiO₂ material was found to limit performance, and suggests that performance is not determined solely by the presence of Ti³⁺.