Identification of the dehydration active sites in glycerol hydrogenolysis to 1,2-propanediol over Cu/SiO2 catalysts

Tailoring Cu-SiO2 Interaction through Nanocatalyst Architecture to Assemble Surface Sites for Furfural Aqueous-Phase Hydrogenation to Cycloketones

In this contribution, nanocatalysts with rather diverse architectures were designed to promote different intimacy degrees between Cu and SiO2 and consequently tune distinct Cu-SiO2 interactions. Previously synthesized copper nanoparticles were deposited onto SiO2 (NPCu/SiO2) in contrast to ordinarily prepared supported Cu/SiO2. NPCu@SiO2 and SiO2@Cu core-shell nanocatalysts were also synthesized, and they were all bulk and surface characterized by XRD, TGA, TEM/HRTEM, H2-TPR, XANES, and XPS. It was found that Cu0 is the main copper phase in NPCu/SiO2 while Cu2+ rules the ordinary Cu/SiO2 catalyst, and Cu0 and electron-deficient Cuδ+ species coexist in the core-shell nanocatalysts as a consequence of a deeper metal-support interaction. Catalytic performance could not be associated with the physical properties of the nanocatalysts derived from their architectures but was associated with the more refined chemical characteristics tuned by their design. Cu/SiO2 and NPCu/SiO2 catalysts led to the formation of furfuryl alcohol, evidencing that catalysts holding weak or no metal-support interaction have no significant impact on product distribution even in the aqueous phase. The establishment of such interactions through advanced catalyst architecture, allowing the formation of electron-deficient Cuδ+ moieties, particularly Cu2+ and Cu+ as unveiled by spectroscopic investigations, is critical to promoting the hydrogenation-ring rearrangement cascade mechanism leading to cycloketones.

Towards the valorisation of glycerol by designing the surface chemistry of carbon xerogels by doping and oxygen functionalization

Research on innovative approaches to the valorisation of glycerol as a subproduct of biodiesel production has acquired an increasing demand in the development of a circular economy around energy generation, especially, in the line of improvement of the heterogeneous metallic catalysts used. In this regard, carbon xerogels have gained importance due to their stability and modifiability, while transition metals such as copper stand out as a cost-effective alternative, resulting in a technology where surface engineering plays a crucial role in achieving competitive catalytic activity. Building upon this, current research evaluates doped xerogels (Si, N, or GO) as supports of Cu and catalysts by themselves for glycerol oxidation. Benefits from the incorporation of oxygenated functional groups (OFG) were also evaluated. Results showed a consistently higher selectivity towards lactic acid (LA) across all catalysts and competitive catalytic conversion. In this performance, dopants played a crucial role in surface acid-base characteristics, while oxygenated functional groups (OFG) influenced copper adsorption, dispersion, and reducibility. Notably, the Cu/CXN-f catalyst demonstrated the highest LA yield by combining the effect of N as a doping species, with the presence of OFG and the formation of appropriated metallic Cu domains. This research underscores the potential of carbon xerogels in the tailored catalyst design, contributing to sustainable chemical production through their customizable textural and chemical properties.

Investigation of Ni-Cu-acid multifunctional synergism in NiCu-phyllosilicate catalysts toward the 1,4-butynediol hydrogenation to 1,4-butanediol

We studied the Ni-Cu-acid multifunctional synergism in NiCu-phyllosilicate catalysts toward 1,4-butynediol hydrogenation to 1,4-butanediol by varying the reduction temperature, which can activate different bimetal and support interactions. Compared with a monometallic Ni phyllosilicate (phy), which only showed one type of metal species when reduced at ∼750 °C, there are three types of metal species for the bimetallic Ni-Cu-phyllosilicate derived catalysts, namely Cuphy, differentiated Ni, and Niphy. Thorough structure-activity/selectivity correlation investigations showed that, although the Ni9Cu1-P catalyst matrix can produce tiny amounts of differentiated Ni0 species under the induction of reduced Cu0 at R250 condition, it could not form Ni-Cu bimetallic interactions for the collaborative hydrogenation of 1,4-butynediol, and the product stays in the semi hydrogenated state. When the reduction temperature is raised to 500 °C, stable Ni-Cu alloy active sites exist, accompanied by the strong metal support interaction and metal acid effect derived from the intimate contact between the extracted metal sites and the surviving functional phyllosilicate support; these functionalities yield a supreme hydrogenation performance of the R500 sample with a 1,4-butanediol yield larger than 91.2%.

Production of Propanediols through In Situ Glycerol Hydrogenolysis via Aqueous Phase Reforming: A Review

Production of 1,2-propanediol and 1,3-propanediol are identified as methods to reduce glycerol oversupply. Hence, glycerol hydrogenolysis is identified as a thermochemical conversion substitute; however, it requires an expensive, high-pressure pure hydrogen supply. Studies have been performed on other potential thermochemical conversion processes whereby aqueous phase reforming has been identified as an excellent substitute for the conversion process due to its low temperature requirement and high H2 yields, factors which permit the process of in-situ glycerol hydrogenolysis which requires no external H2 supply. Hence, this manuscript emphasizes delving into the possibilities of this concept to produce 1,2-propanediol and 1,3-propanediol without “breaking the bank” with expenses. Various heterogenous catalysts of aqueous phase reforming (APR) and glycerol hydrogenolysis were identified, whereby the combination of a noble metal, support, and dopant with a good amount of Brønsted acid sites are identified as the key factors to ensure a high yield of 1,3-propanediol. However, for 1,2-propanediol, a Cu-based catalyst with decent basic support is observed to be the key for good yield and selectivity of product. The findings have shown that it is possible to produce high yields of both 1,2-propanediol and 1,3-propanediol via aqueous phase reforming, specifically 1,2-propanediol, for which some of the findings achieve better selectivity compared to direct glycerol hydrogenolysis to 1,2-propanediol. This is not the case for 1,3-propanediol, for which further studies need to be conducted to evaluate its feasibility.

Chemicals Production from Glycerol through Heterogeneous Catalysis: A Review

Utilization of biofuels generated from renewable sources has attracted broad attention due to their benefits such as reducing consumption of fossil fuels, sustainability, and consequently prevention of global warming. The production of biodiesel causes a huge amount of by-product, crude glycerol, to accumulate. Glycerol, because of its unique structure having three hydroxyl groups, can be converted to a variety of industrially valuable products. In recent decades, increasing studies have been carried out on different catalytic pathways to selectively produce a wide range of glycerol derivatives. In the current review, the main routes including carboxylation, oxidation, etherification, hydrogenolysis, esterification, and dehydration to convert glycerol to value-added products are investigated. In order to achieve more glycerol conversion and higher desired product selectivity, acquisition of knowledge on the catalysts, the type of acidic or basic, the supports, and studying various reaction pathways and operating parameters are necessary. This review attempts to summarize the knowledge of catalytic reactions and mechanisms leading to value-added derivatives of glycerol. Additionally, the application of main products from glycerol are discussed. In addition, an overview on the market of glycerol, its properties, applications, and prospects is presented.

Heterogeneous Catalysts for Conversion of Biodiesel-Waste Glycerol into High-Added-Value Chemicals

The valuable products produced from glycerol transformation have become a research route that attracted considerable benefits owing to their huge volumes in recent decades (as a result of biodiesel production as a byproduct) as well as a myriad of chemical and biological techniques for transforming glycerol into high-value compounds, such as fuel additives, biofuels, precursors and other useful chemicals, etc. Biodiesel has presented another challenge in the considerable increase in its byproduct (glycerol). This review provides a recent update on the transformation of glycerol with an exclusive focus on the various catalysts’ performance in designing reaction operation conditions. The different products observed and cataloged in this review involved hydrogen, acetol, acrolein, ethylene glycol, and propylene glycol (1,3-propanediol and 1,2-propanediol) from reforming and dehydration and hydrogenolysis reactions of glycerol conversions. The future prospects and critical challenges are finally presented.

Catalytic Conversion of Glycerol into Hydrogen and Value-Added Chemicals: Recent Research Advances

In recent decades, the use of biomass as alternative resources to produce renewable and sustainable biofuels such as biodiesel has gained attention given the situation of the progressive exhaustion of easily accessible fossil fuels, increasing environmental concerns, and a dramatically growing global population. The conventional transesterification of edible, nonedible, or waste cooking oils to produce biodiesel is always accompanied by the formation of glycerol as the by-product. Undeniably, it is essential to economically use this by-product to produce a range of valuable fuels and chemicals to ensure the sustainability of the transesterification process. Therefore, recently, glycerol has been used as a feedstock for the production of value-added H2 and chemicals. In this review, the recent advances in the catalytic conversion of glycerol to H2 and high-value chemicals are thoroughly discussed. Specifically, the activity, stability, and recyclability of the catalysts used in the steam reforming of glycerol for H2 production are covered. In addition, the behavior and performance of heterogeneous catalysts in terms of the roles of active metal and support toward the formation of acrolein, lactic acid, 1,3-propanediol, and 1,2-propanediol from glycerol are reviewed. Recommendations for future research and main conclusions are provided. Overall, this review offers guidance and directions for the sufficient and economical utilization of glycerol to generate fuels and high value chemicals, which will ultimately benefit industry, environment, and economy.

Sulfate-functionalized metal–organic frameworks supporting Pd nanoparticles for the hydrogenolysis of glycerol to 1,2-propanediol

Installing sulfate and Pd in MOF-808 achieved glycerol conversion to 1,2-PDO via selective hydrogenolysis.

Recent Advances in Glycerol Catalytic Valorization: A Review

Once a biorefinery is ready to operate, the main processed materials need to be completely evaluated in terms of many different factors, including disposal regulations, technological limitations of installation, the market, and other societal considerations. In biorefinery, glycerol is the main by-product, representing around 10% of biodiesel production. In the last few decades, the large-scale production of biodiesel and glycerol has promoted research on a wide range of strategies in an attempt to valorize this by-product, with its transformation into added value chemicals being the strategy that exhibits the most promising route. Among them, C3 compounds obtained from routes such as hydrogenation, oxidation, esterification, etc. represent an alternative to petroleum-based routes for chemicals such as acrolein, propanediols, or carboxylic acids of interest for the polymer industry. Another widely studied and developed strategy includes processes such as reforming or pyrolysis for energy, clean fuels, and materials such as activated carbon. This review covers recent advances in catalysts used in the most promising strategies considering both chemicals and energy or fuel obtention. Due to the large variety in biorefinery industries, several potential emergent valorization routes are briefly summarized.