Optimization and correlation of HPLC-ELSD and HPLC–MS/MS methods for identification and characterization of sophorolipids

Updated component analysis method for naturally occurring sophorolipids from Starmerella bombicola

Sophorolipids (SLs) are promising glycolipid biosurfactants as they are easily produced and functional. SLs from microorganisms are comprised of mixtures of multiple derivatives that have different structures and properties, including well-known acidic and lactonic SL (ASLs and LSLs, respectively). In this study, we established a method for analyzing all SL derivatives in the products of Starmerella bombicola, a typical SL-producing yeast. Detailed component analyses of S. bombicola products were carried out using reversed-phase high-performance liquid chromatography and mass spectrometry. Methanol was used as the eluent as it is a good solvent for all SL derivatives. With this approach, it was possible to not only quantify the ratio of the main components of ASL, LSL, and SL glycerides but also confirm trace components such as SL mono-glyceride and bola-form SL (sophorose at both ends); notably, this is the first time these components have been isolated and identified successfully in naturally occurring SLs. In addition, our results revealed a novel SL derivative in which a fatty acid is bonded in series to the ASL, which had not been reported previously. Using the present analysis method, it was possible to easily track compositional changes in the SL components during culture. Our results showed that LSL and ASL are produced initially and that SL glycerides accumulate from the middle stage during the fermentation process. KEY POINTS: • An easy and detailed component analysis method for sophorolipids (SLs) is introduced. • Multiple SL derivatives were identified different from known SLs. • A novel hydrophobic acidic SL was isolated and characterized.

Uncovering the fragmentation and separation characteristics of sophorolipid biosurfactants with LC-MS-ESI

The application of liquid chromatography and mass spectrometry (MS) is a challenging area of research for structural identification of sophorolipids, owing to the large number of possible variations in structure and limited knowledge on the separation and fragmentation characteristics of the variants. The aims of this work was to provide a comprehensive analysis of the expected characteristics and fragmentation patterns of a wide range of sophorolipid biosurfactant congeners, providing a methodology and process alongside freely available data to inform and enable future research of commercial or novel sophorolipids. Samples of acidic and lactonic sophorolipid standards were tested using reverse-phase ultra-high performance liquid chromatography and identified using electrospray ionization MS. 37 sophorolipid variants were identified and compared for their elution order and fragmentation pattern under MS/MS. The retention time of sophorolipids was increased by the presence of lactonization, unsaturation, chain length, and acetylation as hydrophobic interactions with the C18 stationary phase increased. A key finding that acidic forms can elute later than lactonic variants was obtained when the fatty acid length and unsaturation and acetylation are altered, in contradiction to previous literature statements. Fragmentation pathways were determined for lactonic and acidic variants under negative [M-H]- and positive [M+NH4]+ ionization, and unique patterns/pathways were identified to help determine the structural components present. The first publicly available database of chromatograms and MS2 spectra has been made available to aid in the identification of sophorolipid components and provide a reliable dataset to accelerate future research into novel sophorolipids and shorten the time to innovation.

ONE-SENTENCE SUMMARY

This article describes the process and challenges in identifying different structures of eco-friendly biosurfactants, providing a novel database to compare results.

Determining the accuracy and suitability of common analytical techniques for sophorolipid biosurfactants

To determine the performance of a sophorolipid biosurfactant production process, it is important to have accurate and specific analytical techniques in place. Among the most popular are the anthrone assay, gravimetric quantification (hexane:ethyl acetate extraction), and high-performance liquid chromatography (HPLC). The choice of analytical tool varies depending on cost, availability, and ease of use; however, these techniques have never been compared directly against one another. In this work, 75 fermentation broths with varying product/substrate concentrations were comprehensively tested with the 3 techniques and compared. HPLC-ultraviolet detection (198 nm) was capable of quantifying C18:1 subterminal hydroxyl diacetylated lactonic sophorolipid down to a lower limit of 0.3 g/L with low variability (<3.21%). Gravimetric quantification of the broths following liquid:liquid extraction with hexane and ethyl acetate showed some linearity (R2 = .658) when compared to HPLC but could not quantify lower than 11.06 g/L, even when no sophorolipids were detected in the sample, highlighting the non-specificity of the method to co-extract non-sophorolipid components in the final gravimetric measure. The anthrone assay showed no linearity (R2 = .129) and was found to cross-react with media components (rapeseed oil, corn steep liquor, glucose), leading to consistent overestimation of sophorolipid concentration. The appearance of poor biomass separation during sample preparation with centrifugation was noted and resolved with a novel sample preparation method with pure ethanol. Extensive analysis and comparisons of the most common sophorolipid quantification techniques are explored and the limitations/advantages are highlighted. The findings provide a guide for scientists to make an informed decision on the suitable quantification tool that meets their needs, exploring all aspects of the analysis process from harvest, sample preparation, and analysis.

Identification and quantification of biosurfactants produced by the marine bacterium Alcanivorax borkumensis by hyphenated techniques

A novel biosurfactant was discovered to be synthesized by the marine bacterium Alcanivorax borkumensis in 1992. This bacterium is abundant in marine environments affected by oil spills, where it helps to degrade alkanes and, under such conditions, produces a glycine-glucolipid biosurfactant. The biosurfactant enhances the bacterium's attachment to oil droplets and facilitates the uptake of hydrocarbons. Due to its useful properties expected, there is interest in the biotechnological production of this biosurfactant. To support this effort analytically, a method combining reversed-phase high-performance liquid chromatography (HPLC) with high-resolution mass spectrometry (HRMS) was developed, allowing the separation and identification of glycine-glucolipid congeners. Accurate mass, retention time, and characteristic fragmentation pattern were utilized for species assignment. In addition, charged-aerosol detection (CAD) was employed to enable absolute quantification without authentic standards. The methodology was used to investigate the glycine-glucolipid production by A. borkumensis SK2 using different carbon sources. Mass spectrometry allowed us to identify congeners with varying chain lengths (C6-C12) and degrees of unsaturation (0-1 double bonds) in the incorporated 3-hydroxy-alkanoic acids, some previously unknown. Quantification using CAD revealed that the titer was approximately twice as high when grown with hexadecane as with pyruvate (49 mg/L versus 22 mg/L). The main congener for both carbon sources was glc-40:0-gly, accounting for 64% with pyruvate and 85% with hexadecane as sole carbon source. With the here presented analytical suit, complex and varying glycolipids can be identified, characterized, and quantified, as here exemplarily shown for the interesting glycine-glucolipid of A. borkumensis.

Are all yeast biosurfactants really capable of lowering surface tension below 30 mN/m ?

The study discusses pitfalls in attempts to determine reliable surface tension values for the culture media and their extracts for two biosurfactant-producing yeast strains: Rhodotorula graminis and Rhodotorula babjevae. The values obtained from an Axisymmetric Drop Shape Analysis (ADSA) tensiometer showed systematically more and more shallow dynamic surface tension decays, suggesting a deterioration of their surface activity. The rate of this apparent surface activity loss was shown to depend on the sample history, with slower changes observed in vigorously shaken samples. On the other hand, the force-based Wilhelmy plate method provided apparently stable surface tension values of the order of 30 mN/m, in accordance with numerous previous literature reports on similar yeast biosurfactants. Both observations can be justified by the presence of an oil emulsified by biosurfactants produced by the yeast. We show that the odd (apparent) surface tension results are in fact the measurement artifacts resulting from slow demulsification and subsequent oil-spreading assisted by the yeast biosurfactants. The apparent surface tension reduction is thus indeed caused by the presence of biosurfactants, but its value does not represent their real adsorption in a thermodynamic sense. Consequently, the often reported in the literature very low surface tension values for the yeast culture media, of the order of 30 ± 5 mN/m, should be treated with caution, especially if the emulsion stabilized with the biosurfactant had not been fully destabilized prior to the measurement.

3D-printed biosurfactant-chitosan antibacterial coating for the prevention of silicone-based associated infections

Infections associated with the surfaces of medical devices represent a critical problem due to biofilm formation and the growing resistance towards antibacterial drugs. This is particularly relevant in commonly used invasive devices such as silicone-based ones where a demand for alternative antibiofilm surfaces is increasing. In this work, an antimicrobial chitosan-biosurfactant hydrogel mesh was produced by 3D-printing. The 3D structure was designed to coat polydimethylsiloxane-based medical devices for infection prevention. Additionally, the porous 3D structure allows the incorporation of customized bioactive components. For this purpose, two biosurfactants (surfactin and sophorolipids) were biosynthesized and tested for their antimicrobial activity. In addition, the printing of surfactant-chitosan-based coatings was optimized, and the resulting 3D structures were characterized (i.e., wettability, FTIR-ATR, antimicrobial activity, and biocompatibility). Compared with surfactin, the results showed a better yield and higher antibacterial activity against Gram-positive bacteria for sophorolipids (SLs). Thus, SLs were used to produce chitosan-based 3D-printed coatings. Overall, the SLs-impregnated coatings showed the best antibacterial activity against Staphylococcus aureus planktonic bacteria (61 % of growth inhibition) and antibiofilm activity (2 log units reduction) when compared to control. Furthermore, concerning biocompatibility, the coatings were cytocompatible towards human dermal fibroblasts. Finally, the coating presented a mesh suitable to be filled with a model bioactive compound (i.e., hyaluronic acid), paving the way to be used for customized therapeutics.

Novel Organic Solvent Nanofiltration Approaches for Microbial Biosurfactants Downstream Processing

Glycolipid biosurfactants are the most prominent group of microbial biosurfactants, comprising rhamnolipids, sophorolipids and mannosylerythritol lipids (MELs). Usually, large amounts of hydrophobic substrates (e.g., vegetable oils) are used to achieve high titers (~200 g/L) of a crude product of low purity at values limited to 50-60%, contaminated with unconsumed triacylglycerol and residual free fatty acids and monoacylglycerides. The methods reported for the removal of these contaminants use a mixture of organic solvents, compromising solvent recyclability and increasing final process costs. This study reports, for the first time, an innovative downstream method for MELs, in which 90% of the triacylglycerols are separated from the crude MEL mixture in a first stage and the other lipid derivatives (free fatty acids, mono- and diacylglycerols) are removed by organic solvent nanofiltration (OSN). Three commercially available membranes (GMT-oNF-2, PuraMEm-600 and DuramMem-500) and several homemade membranes, casted from 22, 24 or 26% (w/v) polybenzimidazole (PBI) solutions, were assessed for crude MELs purification by diafiltration. A final purity of 87-90% in the MELs was obtained by filtering two diavolumes of methanol or ethyl acetate solutions through a PBI 26% membrane, resulting in MELs losses of 14.7 ± 6.1% and 15.3 ± 2.2%, respectively. Higher biosurfactant purities can be archived using the PBI 26% membrane at higher DV, but at the cost of higher product losses. Namely, in MeOH, the use of 6 DV leads to losses of 32% for MELs and 18% for sophorolipids. To obtain MELs at reagent grade with purities equal or higher than 97%, a two-sequential cascade filtration approach was implemented using the commercial membrane, GMT-oNF. In such a process, MELs with 98% purity was obtained at the cost of 11.6% MELs losses. Finally, decoloration, important in some applications, was successfully assessed using activated carbon. Overall, this study reports a unique solution for microbial biosurfactants production with minimal product losses, enabling solvent recycling and potentially reducing costs.

Clean-up Strategy for Dithiocarbamate Fungicide Determination in Soybean by GC-ITD-MS and GC-PFPD: Method Development and Validation

Food matrices consist of many components with different physical and chemical properties that may influence instrumental robustness. The soybean contains fatty coextractives which may have a deleterious effect on the gas chromatography (GC) system. In this study, the efficiencies of PSA, C18OH, C18, silica, aluminum oxide, and Florisil, as dSPE clean-up sorbents, were evaluated by the high-performance liquid chromatography (HPLC) diode-array detector and evaporative light-scattering detector analysis. The dithiocarbamates in soybean samples are determined as CS2 using acidic hydrolysis and isooctane partitioning, followed by GC-PFPD and GC-ITD-MS analyses. The linearity of the analytical curves, the instrument limit of detection matrix effects, the trueness and precision, and the method limit of quantification (LOQ) were assessed in the validation study. Milled soybean was spiked with thiram solution at three concentration levels (corresponding to 0.05, 0.1, and 0.5 mg CS2 kg-1) for recovery determination. Silica appeared to be an effective and cheap sorbent to remove coextracted matrix components without causing any CS2 losses. Recoveries were in the range of 68-91%, with relative standard deviations ≤ 8.7%. The method LOQ was 0.05 mg CS2 kg-1, and both GC-ITD-MS and GC-PFPD systems appeared to be appropriate and complementary to determine dithiocarbamate residues in soybean extracts.

Crude oil biodegradation potential of biosurfactant-producing Pseudomonas aeruginosa and Meyerozyma sp

This study investigates the potential of crude oil degrading capabilities of biosurfactant-producing strains of Pseudomonas aeruginosa MF069166 and Meyerozyma sp. MF138126. P. aeruginosa produced mono-/di-rhamnolipids congeners whereas, Meyerozyma sp. produced acidic and lactonic forms of sophorolipids with crude oil. The values of critical micelle concentrations of rhamnolipids and sophorolipids were 40 mg/L and 50 mg/L with reductions in surface tension of water to 29 mN/m and 33 mN/m. Dynamic light scattering revealed that the average diameter of micellar aggregates of rhamnolipids ranged between 300 and 350 nm and the average size of sophorolipids micelles was 309 nm and 380 nm. Biosurfactants from P. aeruginosa and Meyerozyma sp. exhibited emulsification activities of 87% and 84% in crude oil. Cell surface hydrophobicity of both strains was higher in the presence of hydrophobic contaminants. The biosurfactants showed stability under varying pH, NaCl concentrations and temperatures. Gravimetric and GC-MS analyses demonstrated that P. aeruginosa degraded 91% of the petroleum hydrocarbons while Meyerozyma sp. showed 87% biodegradation efficiency. P. aeruginosa and Meyerozyma sp. have also been found to degrade halogen-containing compounds and showed excellent crude oil degradation efficiency. It is concluded that both strains have high potential of applications in the bioremediation of hydrocarbons-contaminated sites.

Fighting S. aureus catheter-related infections with sophorolipids: Electing an antiadhesive strategy or a release one?

Staphylococcus aureus medical devices related-infections, such as blood stream catheter are of major concern. Their prevention is compulsory and strategies, not prone to the development of resistance, to prevent S. aureus biofilms on catheter surfaces (e.g. silicone) are needed. In this work two different approaches using sophorolipids were studied to prevent S. aureus biofilm formation on medical grade silicone: i) an antiadhesive strategy through covalent bond of sophorolipids to the surface; ii) and a release strategy using isolated most active sophorolipids. Sophorolipids produced by Starmerella bombicola, were characterized by UHPLC-MS and RMN, purified by automatic flash chromatography and tested for their antimicrobial activity towards S. aureus. Highest antimicrobial activity was observed for C18:0 and C18:1 diacetylated lactonic sophorolipids showing a MIC of 50 μg mL^-1. Surface modification with acidic or lactonic sophorolipids when evaluating the anti-adhesive or release strategy, respectively, was confirmed by contact angle, FTIR-ATR and AFM analysis. When using a mixture of acidic sophorolipids covalently bonded to silicone surface as antiadhesive strategy cytocompatible surfaces were obtained and a reduction of 90 % on biofilm formation was observed. Nevertheless, if a release strategy is adopted with purified lactonic sophorolipids a higher effect is achieved. Most promising compound was C18:1 diacateylated lactonic sophorolipid that showed no cellular viability reduction when a concentration of 1.5 mg mL^-1 was selected and a reduction on biofilm around 5 log units. Results reinforce the applicability of these antimicrobial biosurfactants on preventing biofilms and disclose that their antimicrobial effect is imperative when comparing to their antiadhesive properties.

Seeking faster, alternative methods for glycolipid biosurfactant characterization and purification

Biosurfactants have been investigated as potential alternatives for synthetic surfactants in several areas, for example, in environmental and pharmaceutical fields. In that regard, extensive research has been carried out with sophorolipids and rhamnolipids that also present various biological properties with therapeutic significance. These biosurfactants are obtained as complex mixtures of slightly different molecules, and thus when studying these microbial glycolipids, the ability to identify and purify the produced compounds is of extreme importance. This study aimed to develop improved methodologies for the identification, separation, and purification of sophorolipids and rhamnolipids. Therefore, an ultra-high-performance liquid chromatography-tandem mass spectrometry (UHPLC-MS/MS) method was modified to ensure faster characterization of both sophorolipids and rhamnolipids, enabling the identification and fragmentation pattern description of 10 and 13 congeners, respectively. The separation and purification of these biosurfactants was achieved with novel reversed-phase solid-phase extraction methods guaranteeing the isolation of different glycolipids, including those considered for their significant biological activity (e.g. antimicrobial, anticancer). It was possible to isolate sophorolipids and rhamnolipids with purity of 94% and 99%, respectively. The methods presented herein can be easily implemented and are expected to make purification of these biosurfactants easier, facilitating the study of their individual properties in further works.

Exploring the potential of chitosan-based particles as delivery-carriers for promising antimicrobial glycolipid biosurfactants

Driven by the need to find alternatives to control Staphylococcus aureus infections, this work describes the development of chitosan-based particulate systems as carriers for antimicrobial glycolipids. By using a simple ionic gelation method stable nanoparticles were obtained showing an encapsulation efficiency of 41.1 ± 8.8 % and 74.2 ± 1.3 % and an average size of 210.0 ± 15.7 nm and 329.6 ± 8.0 nm for sophorolipids and rhamnolipids chitosan-nanoparticles, respectively. Glycolipids incorporation and particle size was correspondingly corroborated by FTIR-ATR and TEM analysis. Rhamnolipids chitosan nanoparticles (RLs-CS_p) presented the highest antimicrobial effect towards S. aureus (ATCC 25923) exhibiting a minimal inhibitory concentration of 130 μg/mL and a biofilm inhibition ability of 99 %. Additionally, RLs-CS_p did not interfere with human dermal fibroblasts (AG22719) viability and proliferation under the tested conditions. The results revealed that the RLs-CS_p were able to inhibit bacterial growth showing adequate cytocompatibility and might become, after additional studies, a valuable approach to prevent S. aureus related infections.

Synergy between Sophorolipid Biosurfactant and SDS Increases the Efficiency of P. aeruginosa Biofilm Disruption

Biofilms are communities of bacteria encased in self-secreted extracellular polymeric substances (EPS) that adhere stubbornly to submerged surfaces. Once established, these communities can cause serious chronic illnesses in medical settings, while they can promote corrosion and biofouling in industrial settings. Due to the difficulty of their removal, strongly oxidizing chemicals and detergents can be used to degrade and remove biofilms by killing the cells and degrading the matrix; however, the choice of compounds is limited in delicate environments due to the potential damage they may cause. In the case of detergents, most are synthesized from nonrenewable petrochemicals that have a degree of aquatic toxicity. There is a growing need to identify and characterize alternatives to synthetic surfactants. Biosurfactants, which are surfactants produced by microorganisms, are a promising alternative since they can be synthesized from renewable resources, have low environmental toxicity, and have been shown to have higher degrees of specificity in the mechanism of action. Sophorolipids are a class of glycolipid surfactants produced by yeast that have demonstrated great promise due to large yields from renewable feedstocks and for antimicrobial properties; however, the effect of the application of sophorolipids to Gram-negative bacterial biofilms has not been well studied. We investigate the antibiofilm properties of sophorolipids by demonstrating its ability to cause the catastrophic disruption of Pseudomonas aeruginosa PAO1 biofilms in microfluidic channels. We show that while sophorolipids inflict little damage to the bacteria, they weaken the EPS biofilm matrix, leading to surface-detachment and breakup of the biofilm. Furthermore, we find that sophorolipids act cooperatively with the widely used surfactant, sodium dodecyl sulfate. When combined, concentrations ∼100-fold lower than the minimum effective concentration, when used independently, recover potency. Biosurfactants are typically expensive to produce, thus our work demonstrates a means to improve efficacy while simultaneously reducing both cost and the amount of environmentally harmful substances used.

Sophorolipid Biosurfactant Can Control Cutaneous Dermatophytosis Caused by Trichophyton mentagrophytes

Trichophyton mentagrophytes, a zoophilic species, is one of the most frequently isolated dermatophytes in many parts of the world. This study investigated the efficacy of a sophorolipid (SL-YS3) produced by Rhodotorula babjevae YS3 against dermatophytosis caused by T. mentagrophytes. SL-YS3 was characterized by gas chromatography–mass spectrometry (GC–MS) and ultra-performance liquid chromatography, coupled with electrospray mass spectrometry (UPLC-ESI-MS). SL-YS3 comprised of six different fatty acids as the hydrophobic components of constituent congeners and sophorose as the hydrophilic component. Inhibitory effects of purified SL-YS3 against hyphal growth was found to be 85% at a 2 mg ml^–1 concentration, and MIC was 1 mg ml^–1. Microscopic examination with scanning electron microscopy (SEM), atomic force microscopy, and confocal laser scanning microscopy (CLSM) revealed that SL-YS3 exerts its effect by disrupting cell membrane integrity causing cell death. SL-YS3 was also effective in reducing the biofilms formed by T. mentagrophytes, which was observed spectrophotometrically with crystal-violet staining and further validated with SEM and CLSM studies of treated biofilms. In vivo studies in a mouse model of cutaneous dermatophytosis involving macroscopic observations, percent culture recovery from skin samples, and histopathological studies showed that SL-YS3 could effectively cure the infected mice after 21 days of topical treatment. Terbinafine (TRB) was used as a standard drug in the experiments. We demonstrate, for the first time, the antidermatophytic activity of a sophorolipid biosurfactant. The findings are suggestive that SL-YS3 can be formulated as a novel antifungal compound to treat cutaneous mycoses caused by T. mentagrophytes.

Fly ash based robust biocatalyst generation: a sustainable strategy towards enhanced green biosurfactant production and waste utilization

Biosurfactants have been well recognized as an environmentally friendly alternative to chemical surfactants. However, their production remains challenging due to low productivity, short-term microbe stability and the potentially toxic by-products generated in the growth media. To overcome these challenges, the emerging biofilm-based biosynthesis was investigated in this study. A fresh insight into the biosynthesis process was provided through using waste fly ash as a carrier material. The biofilm produced by biosurfactant producer B. subtilis N3-1P attached onto the surface of fly ash acted as a robust and effective biocatalyst. Zeta potential analysis and scanning electron microscope (SEM) characterization were conducted to help unravel the biocatalyst formation. High-value biosurfactant products were then produced in an efficient and sustainable manner. Stimulation by a fly ash assisted biocatalyst on biosurfactant production was confirmed. The biosurfactant yield was boosted over ten times after 24 hours, at a fly ash dosage of 0.5%. The highest biosurfactant yield was achieved after five days, with a final productivity of 305 critical micelle dilution. The underlying mechanism of fly ash assisted biosurfactant production was tracked through it exerting an effect on the quorum sensing system. Fourier-transform infrared (FTIR) spectroscopy and matrix assisted laser desorption/ionization-time of flight (MALDI-TOF) analysis demonstrated that the final biosurfactant product belonged to the lipopeptides. This research output is expected to accelerate the development of more effective bioreactors, and make a continuous contribution to high-value product generation and waste reduction.

Biosurfactants have been well recognized as an environmentally friendly alternative to chemical surfactants.

Biological control of the soft rot bacterium Pectobacterium carotovorum by Bacillus amyloliquefaciens strain Ar10 producing glycolipid-like compounds

Four hundred and fifty bacteria were evaluated for antagonistic activity against bacterial soft rot of potato caused by Pectobacterium carotovorum sp strain II16. A strain Ar10 exhibiting potent antagonist activity has been identified as Bacillus amyloliquefaciens on the basis of biochemical and molecular characterization. Cell free supernatant showed a broad spectrum of antibacterial activity against human and phytopathogenic bacteria in the range of 10-60 AU/mL. Incubation of P. carotovorum cells with increasing concentrations of the antibacterial compound showed a killing rate of 94.8 and 96% at MIC and 2xMIC respectively. In addition, the antibacterial agent did not exert haemolytic activity at the active concentration and has been preliminary characterized by TLC and GC-MS as a glycolipid compound. Treatment of potato tubers with strain Ar10 for 72 h significantly reduced the severity of disease symptoms (100 and 85.05% reduction of necrosis deep / area and weight loss respectively). The same levels in disease symptoms severity was also recorded following treatment of potato tubers with cell free supernatant for 1 h. Data suggest that protection against potato soft rot disease may be related to glycolipid production by strain Ar10. The present study affords new alternatives for anti-Pectobacterium carotovorum bioactive compounds against the soft rot disease of potato.

Production, characterization, and antifungal activity of a biosurfactant produced by Rhodotorula babjevae YS3

Background

Sophorolipids are one of the most promising glycolipid biosurfactants and have been successfully employed in bioremediation and various other industrial sectors. They have also been described to exhibit antimicrobial activity against different bacterial species. Nevertheless, previous literature pertaining to the antifungal activity of sophorolipids are limited indicating the need for further research to explore novel strains with wide antimicrobial activity. A novel yeast strain, Rhodotorula babjevae YS3, was recently isolated from an agricultural field in Assam, Northeast India. This study was primarily emphasized at the characterization and subsequent evaluation of antifungal activity of the sophorolipid biosurfactant produced by R. babjevae YS3.

Results

The growth kinetics and biosurfactant production by R. babjevae YS3 was evaluated by cultivation in Bushnell-Haas medium containing glucose (10% w/v) as the sole carbon source. A reduction in the surface tension of the culture medium from 70 to 32.6 mN/m was observed after 24 h. The yield of crude biosurfactant was recorded to be 19.0 g/l which might further increase after optimization of the growth parameters. The biosurfactant was characterized to be a heterogeneous sophorolipid (SL) with both lactonic and acidic forms after TLC, FTIR and LC–MS analyses. The SL exhibited excellent oil spreading and emulsifying activity against crude oil at 38.46 mm² and 100% respectively. The CMC was observed to be 130 mg/l. The stability of the SL was evaluated over a wide range of pH (2–10), salinity (2–10% NaCl) and temperature (at 120 °C for time intervals of 30 up to 120 min). The SL was found to retain surface-active properties under the extreme conditions. Additionally, the SL exhibited promising antifungal activity against a considerably broad group of pathogenic fungi viz. Colletotrichum gloeosporioides, Fusarium verticilliodes, Fusarium oxysporum f. sp. pisi, Corynespora cassiicola, and Trichophyton rubrum.

Conclusions

The study reports, for the first time, the biosurfactant producing ability of R. babjevae, a relatively lesser studied yeast. The persistent surface active properties of the sophorolipid in extreme conditions advocates its applicability in diverse environmental and industrial sectors. Further, antifungal activities against plant and human pathogens opens up possibilities for development of efficient and eco-friendly antifungal agents with agricultural and biomedical applications.

Current status in biotechnological production and applications of glycolipid biosurfactants

Biosurfactants are natural compounds with surface activity and emulsifying properties produced by several types of microorganisms and have been considered an interesting alternative to synthetic surfactants. Glycolipids are promising biosurfactants, due to low toxicity, biodegradability, and chemical stability in different conditions and also because they have many biological activities, allowing wide applications in different fields. In this review, we addressed general information about families of glycolipids, rhamnolipids, sophorolipids, mannosylerythritol lipids, and trehalose lipids, describing their chemical and surface characteristics, recent studies using alternative substrates, and new strategies to improve of production, beyond their specificities. We focus in providing recent developments and trends in biotechnological process and medical and industrial applications.

Enhanced separation and analysis procedure reveals production of tri-acylated mannosylerythritol lipids by Pseudozyma aphidis

Mannosylerythritol lipids (MELs) are one of the most promising biosurfactants because of their high fermentation yields (&gt;100 g l−1) and during the last two decades they have gained a lot of attention due to their interesting self-assembling properties and biological activities. In this study, MELs were produced by fed-batch bioreactor fermentation of rapeseed oil with Pseudozyma aphidis MUCL 27852. This high-level MEL-producing yeast secretes four conventional MEL structures, -A, -B, -C and -D, which differ in their degree of acetylation. During our research, unknown compounds synthesized by P. aphidis were detected by thin-layer chromatography. The unknown compounds were separated by flash chromatography and identified as tri-acylated MELs by high-performance liquid chromatography tandem mass spectrometry (HPLC–MS/MS). The third fatty acid chain on the tri-acylated MELs was positioned on the primary alcohol of the erythritol moiety and comprised long-chain acids, mainly oleic and linoleic acid, which are not found in conventional di-acylated MELs. Furthermore, the LC–MS analysis time of conventional MELs was reduced to almost one-third by switching from HPLC–MS/MS to ultraperformance liquid chromatography tandem mass spectrometry (UPLC–MS/MS). Provided optimization of the fermentation yield, P. aphidis could be an interesting novel producer of tri-acylated MELs and, thereby expand the supply and applicability of biosurfactants.

Can Sophorolipids prevent biofilm formation on silicone catheter tubes?

Given the impact of biofilms in health care environment and the increasing antibiotic resistance and/or tolerance, new strategies for preventing that occurrence in medical devices are obligatory. Thus, biomaterials surface functionalization with active compounds can be a valuable approach. In the present study the ability of the biosurfactants sophorolipids to prevent biofilms formation on silicone rubber aimed for medical catheters was investigated. Sophorolipids produced by Starmerella bombicola, identified by HPLC-MS/MS were used to cover silicone and surface characterization was evaluated through contact angle measurements and FTIR-ATR. Results revealed that sophorolipids presence on silicone surface decreased the hydrophobicity of the material and biofilm formation of Staphylococcus aureus ATCC 25923 and Escherichia coli ATCC 25922. Antibiofilm activity was evaluated through different methods and was more pronounced against S. aureus. Furthermore, biocompatibility of silicone specimens with HaCaT cells was also obtained. From this study it was possible to conclude that sophorolipids seem to be a favourable approach for coating silicone catheters. Such compounds may represent a novel source of antibiofilm agents for technological development passing through strategies of permanent functionalization of surfaces.

Selective recovery of acidic and lactonic sophorolipids from culture broths towards the improvement of their therapeutic potential

Sophorolipids (SLs) were produced by Starmerella bombicola. The separation and purification of SLs are a complex process, since they are produced as a mixture of compounds with few structural differences. Solvent extraction is commonly used in downstream processing. In this work, an environmental friendly approach was developed for SLs recovery and purification, based on neutral polymeric sorbents, Amberlite XAD16N^TM, XAD18^TM, and XAD1600N^TM. In batch microassays, key parameters of sorption/desorption process (e.g., contact time, temperature, sorbents, and SLs concentrations) were optimized for separation of acidic and lactonic SLs. Sorption equilibrium was reached after 2-3 h, for all the sorbents tested. Among them XAD1600N^TM showed a higher sorption capacity (q _max 230 mg g^-1), a higher removal (≈100 %) of acidic and lactonic SLs [1 and 2.5 % (w/v)], and the best selectivity. Methanol, ethanol, and acetone were suitable for SLs elution. A selective desorption of SLs was attained with acetonitrile aqueous solutions (v/v): (1) 25 % led to 88.3 % of acidic SLs and (2) 55 % followed by methanol solution (100 %) led to 93.2 % of purified lactonic SLs. This achievement was particularly important regarding SLs potential therapeutic applications, since acidic and lactonic SLs show different biologic activities. In fact, acid SLs show higher virucidal and pro-inflammatory cytokine activity, while lactonic SLs show stronger spermicidal and anti-cancer activity.

Development of novel sophorolipids with improved cytotoxic activity toward MDA-MB-231 breast cancer cells

Sophorolipids (SLs) are glycolipid biosurfactants, produced as a mixture of several compounds by some nonpathogenic yeast. In the current study, separation of individual SLs from mixtures with further evaluation of their surface properties and biologic activity on MDA-MB-321 breast cancer cell line were investigated. SLs were biosynthesized by Starmerella bombicola in a culture media supplemented with borage oil. A reverse-phase flash chromatography method with an automated system coupled with a prepacked cartridge was used to separate and purify the main SLs. Compositional analysis of SLs was performed by high-performance liquid chromatography with electrospray ionization mass spectrometry and tandem mass spectrometry. The following diacetylated lactonic SLs were isolated and purified: C18:0, C18:1, C18:2, and C18:3. The critical micelle concentration (CMC) and surface tension at CMC (γCMC ) of the purified SLs showed an increase with the number of double bonds. High cytotoxic effect against MDA-MB-231 cells was observed with C18:0 and C18:1 lactonic SLs. The cytotoxic effects of C18:3 lactonic SL on cancerous cells were for the first time studied. This cytotoxic effect was considerably higher than the promoted by acidic SLs; however, it induced a lower effect than the previously mentioned SLs, C18:0 and C18:1. To our knowledge, for the first time, C18:1 lactonic SL, in selected concentrations, proved to be able to inhibit MDA-MB-231 cell migration without compromising cell viability and to increase intracellular reactive oxygen species.