Effect of sonication and freezing–thawing on the aggregate size and dynamic surface tension of aqueous DPPC dispersions

Nuclear lipids in chromatin regulation: Biological roles, experimental approaches and existing challenges

Lipids are crucial for various cellular functions. Besides the storage of energy equivalents, these include forming membrane bilayers and serving as signaling molecules. While significant progress has been made in the comprehension of the molecular and cellular biology of lipids, their functions in the cell nucleus remain poorly understood. The main role of the eukaryotic cell nucleus is to provide an environment for the storage and regulation of chromatin which is a complex of DNA, histones, and associated proteins. Recent studies suggest that nuclear lipids play a role in chromatin regulation and epigenetics. Here, we discuss various experimental methods in lipid-chromatin research, including biophysical, structural, and cell biology approaches, pointing out their strengths and weaknesses. We take the view that nuclear lipids have a far more widespread impact on chromatin than is currently acknowledged. This gap in comprehension is mostly due to existing experimental challenges in the study of lipid-chromatin biology. Several new, interdisciplinary approaches are discussed that could aid in elucidating the roles of nuclear lipids in chromatin regulation and gene expression.

Inhibition of cryoaggregation of phospholipid liposomes by an Arabidopsis intrinsically disordered dehydrin and its K-segment

Dehydrin is an intrinsically disordered protein involved in the cold tolerance of plants. Although dehydrins have been thought to protect biomembranes under cold conditions, the underlying protective mechanism has not been confirmed. Here we report that Arabidopsis dehydrin AtHIRD11 inhibited the aggregation of phospholipid liposomes after freezing and thawing. AtHIRD11 showed significantly greater cryoaggregation-prevention activity than cryoprotective agents such as trehalose, proline, and polyethylene glycols. Amino acid sequence segmentation analysis indicated that the K-segment of AtHIRD11 inhibited the cryoaggregation of phosphatidylcholine (PC) liposomes but other segments did not. This showed that K-segments conserved in all dehydrins were likely to be the cryoprotective sites of dehydrins. Amino acid replacement for a typical K-segment (TypK for short) sequence demonstrated that both hydrophobic and charged amino acids were required for the cryoaggregation-prevention activity of PC liposomes. The amino acid shuffling of TypK remarkably reduced cryoprotective activity. Although TypK did not bind to PC liposomes in solution, the addition of liposomes reduced its disordered content under crowded conditions. Together, these results suggested that dehydrins protected biomembranes via conserved K-segments whose sequences were optimized for cryoprotective activities.

Multifunctional Microparticles Incorporating Gold Compound Inhibit Human Lung Cancer Xenograft

PURPOSE

Gold porphyrin (AuP) is a complex that has been shown to be potent against various tumors. A biocompatible interpenetrating network (IPN) system comprised of polyethyleneglycol diacrylate (PEGdA) and chemically-modified gelatin has been shown to be an effective implantable drug depot to deliver AuP locally. Here we designed IPN microparticles complexed with AuP to facilitate intravenous administration and to diminish systemic toxicity.

METHODS

We have synthesized and optimized an IPN microparticle formulation complexed with AuP. Tumor cell cytotoxicity, antitumor activity, and survival rate in lung cancer bearing nude mice were analyzed.

RESULTS

IPN microparticles maintained AuP bioactivity against lung cancer cells (NCI-H460). In vivo study showed no observable systemic toxicity in nude mice bearing NCI-H460 xenografts after intravenous injection of 6 mg/kg AuP formulated with IPN microparticles. An anti-tumor activity level comparable to free AuP was maintained. Mice treated with 6 mg/kg AuP in IPN microparticles showed 100% survival rate while the survival rate of mice treated with free AuP was much less. Furthermore, microparticle-formulated AuP significantly reduced the intratumoral microvasculature when compared with the control.

CONCLUSION

AuP in IPN microparticles can reduce the systemic toxicity of AuP without compromising its antitumor activity. This work highlighted the potential application of AuP in IPN microparticles for anticancer chemotherapy.

Surfactant-induced Marangoni transport of lipids and therapeutics within the lung

Understanding the fundamentals of surface transport on thin viscous films has important application in pulmonary drug delivery. The human lung contains a large-area interface between its complex fluid lining and inhaled air. Marangoni flows driven by surface tension gradients along this interface would promote enhanced distribution of inhaled therapeutics by carrying them from where they are deposited in the upper airways, along the fluid interface to deeper regions of the lung. Motivated by the potential to improve therapies for acute and chronic lung diseases, we review recent progress in modeling and experimental studies of Marangoni transport induced by the deposition of surfactant-containing microliter drops and liquid aerosols (picoliter drops) onto a fluid interface. The roles of key system variables are identified, including surfactant solubility, drop miscibility with the subphase, and the thickness, composition and surface properties of the subphase liquid. Of particular interest is the unanticipated but crucial role of aerosol processing to achieve Marangoni transport via phospholipid vesicle dispersions, which are likely candidates for a biocompatible delivery system. Progress in this field has the potential to not only improve outcomes in patients with chronic and acute lung diseases, but also to further our understanding of surface transport in complex systems.

Aerosolizing Lipid Dispersions Enables Antibiotic Transport Across Mimics of the Lung Airway Surface Even in the Presence of Pre-existing Lipid Monolayers

BACKGROUND

Secondary lung infections are the primary cause of morbidity associated with cystic fibrosis lung disease. Aerosolized antibiotic inhalation is potentially advantageous but has limited effectiveness due to altered airway aerodynamics and deposition patterns that limit drug access to infected regions. One potential strategy to better reach infected areas is to formulate aerosols with surfactants that induce surface tension gradients and drive postdeposition drug dispersal via Marangoni transport along the airway surface liquid (ASL). Since this relies on surfactant-induced surface tension reduction, the presence of endogenous lipid monolayers may hinder drug dispersal performance.

METHODS

Tobramycin solutions were formulated with dipalmitoylphosphatidylcholine (DPPC), a major component of endogenous pulmonary surfactant, to drive postdeposition aerosol dispersal across a model ASL based on a liquid layer or "subphase" of aqueous porcine gastric mucin (PGM) solution with predeposited DPPC monolayers to mimic the endogenous surfactant. In vitro subphase samples were collected from regions outside the aerosol deposition zone and assayed for tobramycin concentration using a closed enzyme donor immunoassay. The motion of a tracking bead across the subphase surface and the corresponding decrease in surface tension on aerosol deposition were tracked both with and without a predeposited DPPC monolayer. The surface tension/area isotherm for DPPC on PGM solution subphase was measured to aid in the interpretation of the tobramycin dispersal behavior.

RESULTS AND CONCLUSIONS

Transport of tobramycin away from the deposition region occurs in aerosols formulated with DPPC whether or not predeposited lipid is present, and tobramycin concentrations are similar in both cases across biologically relevant length scales (∼8 cm). When DPPC is deposited from an aerosol, it induces ultralow surface tensions (<5 mN/m), which drive Marangoni flows, even in the presence of a dense background layer of DPPC. Therefore, aerosolized phospholipids, such as DPPC, will likely be effective spreading agents in the human lung.

Nebulizing novel multifunctional nanovesicles: the impact of macrophage-targeted-pH-sensitive archaeosomes on a pulmonary surfactant

In this study, a NE-U22 vibrating mesh Omron nebulizer was used to deliver the Lissamine™ rhodamine B 1,2-dihexadecanoyl-sn-glycero-3-phosphoethanolamine triethylammonium salt (Rh-PE) and 8-hydroxypyrene-1,3,6-trisulfonic acid trisodium salt (HPTS)/p-xylene-bis-pyridinium bromide (DPX) double-labelled macrophage-targeted pH-sensitive archaeosomes (ApH, 174 ± 48 nm, -30 ± 13 mV unilamellar nanovesicles made of dioleoyl-sn-glycero-3-phosphoethanolamine: [total polar archaeolipids from the hyperhalophile archaebacteria Halorubrum tebenquichense]: cholesteryl hemisuccinate 4.2 : 2.8 : 3 w : w : w) to J774A.1 cells covered by a Prosurf pulmonary surfactant (PS) monolayer at or below the equilibrium surface pressure πe. The uptake and cytoplasmic drug release from ApH were assessed by flow cytometry of Rh-PE and HPTS fluorescence, respectively. Despite being soft matter, nanovesicles are submitted to the dismantling interactions of shear stress of nebulization and contact with the surfactant barrier, and at least a fraction of nebulized ApH was found to be stable enough to execute higher cytoplasmic delivery than archaeolipid-lacking vesicles. Nebulized ApH increased the PS tensioactivity to just below πe, which was beyond the physiological range; this finding indicated that changes in lung surfactant function induced by nebulized nanovesicles were less likely to occur in vivo. The cytoplasmic delivery from ApH slightly decreased across monolayers at πe; this suggested that nanovesicles crossed the PS in a fashion inversely related to monolayer compression. Laurdan generalized polarization and fluorescence anisotropy were used to reveal that nanovesicles neither depleted B and C proteins of the PS nor increased the fluidity of the PS. Together with the feasibility of the cytoplasmic drug delivery upon nebulization, our results suggest that ApH are structurally unique nanovesicles that would not induce biophysical changes leading to PS inactivation and open the door to deeper future translational studies.

Enabling Marangoni flow at air-liquid interfaces through deposition of aerosolized lipid dispersions

It has long been known that deposited drops of surfactant solution induce Marangoni flows at air-liquid interfaces. These surfactant drops create a surface tension gradient, which causes an outward flow at the fluid interface. We show that aqueous phospholipid dispersions may be used for this same purpose. In aqueous dispersions, phospholipids aggregate into vesicles that are not surface-active; therefore, drops of these dispersions do not initiate Marangoni flow. However, aerosolization of these dispersions disrupts the vesicles, allowing access to the surface-active monomers within. These lipid monomers do have the ability to induce Marangoni flow. We hypothesize that monomers released from broken vesicles adsorb on the surfaces of individual aerosol droplets and then create localized surface tension reduction upon droplet deposition. Deposition of lipid monomers via aerosolization produces surface tensions as low as 1mN/m on water. In addition, aerosolized lipid deposition also drives Marangoni flow on entangled polymer solution subphases with low initial surface tensions (∼34mN/m). The fact that aerosolization of phospholipids naturally found within pulmonary surfactant can drive Marangoni flows on low surface tension liquids suggests that aerosolized lipids may be used to promote uniform pulmonary drug delivery without the need for exogenous spreading agents.

Curcumin liposomes prepared with milk fat globule membrane phospholipids and soybean lecithin

Using thin film ultrasonic dispersion method, the curcumin liposomes were prepared with milk fat globule membrane (MFGM) phospholipids and soybean lecithins, respectively, to compare the characteristics and stability of the 2 curcumin liposomes. The processing parameters of curcumin liposomes were investigated to evaluate their effects on the encapsulation efficiency. Curcumin liposomes were characterized in terms of size distribution, ζ-potential, and in vitro release behavior, and then their storage stability under various conditions was evaluated. The curcumin liposomes prepared with MFGM phospholipids had an encapsulation efficiency of about 74%, an average particle size of 212.3 nm, and a ζ-potential of -48.60 mV. The MFGM liposomes showed higher encapsulation efficiency, smaller particle size, higher absolute value of ζ-potential, and slower in vitro release than soybean liposomes. The retention rate of liposomal curcumin was significantly higher than that of free curcumin. The stability of the 2 liposomes under different pH was almost the same, but MFGM liposomes displayed a slightly higher stability than soybean liposomes under the conditions of Fe(3+), light, temperature, oxygen, and relative humidity. In conclusion, MFGM phospholipids have potential advantages in the manufacture of curcumin liposomes used in food systems.

High Membrane Curvature Enhances Binding, Conformational Changes, and Fibrillation of Amyloid-β on Lipid Bilayer Surfaces

Aggregation of the amyloid-β (Aβ) protein and the formation of toxic aggregates are the possible pathogenic pathways in Alzheimer's disease. Accumulating evidence suggests that lipid membranes play key roles in protein aggregation, although the intermolecular forces that drive the interactions between Aβ-(1-40) and the membranes vary in different membrane systems. Here, we observed that a high positive curvature of lipid vesicles with diameters of ∼30 nm enhanced the association of Aβ with anionic phosphatidylglycerol membranes in the liquid-crystalline phase and with zwitterionic phosphatidylcholine membranes in the gel phase. The binding modes of Aβ to these membranes differ in terms of the location of the protein on the membrane and of the protein secondary structure. The fibrillation of Aβ was accelerated in the presence of the vesicles and at high protein-to-lipid ratios. Under these conditions, the protein accumulated on the surfaces, as demonstrated by a high (10(7) M(-1)) binding constant. Our findings suggest that packing defects on membranes with high curvatures, such as the intraluminal vesicles in multivesicular bodies and the exosomes, might result in the accumulation of toxic protein aggregates.

Effects of lipid membrane curvature on lipid packing state evaluated by isothermal titration calorimetry

In this report, we present a novel approach for the elucidation of the physicochemical properties of lipid membranes by isothermal titration calorimetry (ITC) to quantify the heat absorbed during the solubilization of vesicles into TritonX-100 micelles. By using large and small unilamellar vesicles for comparison, this method provides calorimetric data on the gel-to-liquid-crystalline phase transition and its curvature effects and, in particular, the enthalpy change upon membrane deformation from a planar to a curved shape, which cannot be obtained by the conventional approach using differential scanning calorimetry. The results showed quantitatively that the increase in membrane curvature increases the enthalpy of 1,2-dimyristoyl-sn-glycero-3-phosphocholine membranes both below and above the phase-transition temperature, and that the effect is more significant for the former condition. The calorimetric data obtained are further discussed in relation to the elastic bending energy of the membranes and membrane-peptide interaction.

Viewing dynamic interactions of proteins and a model lipid membrane with atomic force microscopy

The information covered in this chapter will present a model homogenous membrane preparation technique and dynamic imaging procedure that can be successfully applied to more than one type of lipid study and atomic force microscope (AFM) instrument setup. The basic procedural steps have been used with an Asylum Research MFP-3D BIO and the Bruker (formerly, Veeco) BioScope. The AFM imaging protocol has been supplemented by procedures (not to be presented in this chapter) of ellipsometry, standardized western blotting, and dot-blots to verify appropriate purity and activity of all experimental molecular components; excellent purity and activity level of the lipids, proteins, and drug(s) greatly influence the success of imaging experiments in the scanning probe microscopy field. The major goal of the chapter is to provide detailed procedures for sample preparation and operation of the Asylum Research MFP-3D BIO AFM. In addition, one should be cognizant that our comprehensive description in the use of the MFP-3D BIO's functions for successful image acquisitions and analyses is greatly enhanced by Asylum Research's (AR's) accompanying extensive manual(s), technical notes, and AR's users forum. Ultimately, the stepwise protocol and information will allow novice personnel to begin acquiring quality images for processing and analysis with minimal supervision.

Substrate Effects on the Formation Process, Structure and Physicochemical Properties of Supported Lipid Bilayers

Supported lipid bilayers are artificial lipid bilayer membranes existing at the interface between solid substrates and aqueous solution. Surface structures and properties of the solid substrates affect the formation process, fluidity, two-dimensional structure and chemical activity of supported lipid bilayers, through the 1–2 nm thick water layer between the substrate and bilayer membrane. Even on SiO₂/Si and mica surfaces, which are flat and biologically inert, and most widely used as the substrates for the supported lipid bilayers, cause differences in the structure and properties of the supported membranes. In this review, I summarize several examples of the effects of substrate structures and properties on an atomic and nanometer scales on the solid-supported lipid bilayers, including our recent reports.

Self-assembly of a peptide amphiphile containing L-carnosine and its mixtures with a multilamellar vesicle forming lipid

The self-assembly of the peptide amphiphile (PA) hexadecyl-(β-alanine-histidine) is examined in aqueous solution, along with its mixtures with multilamellar vesicles formed by DPPC (dipalmitoyl phosphatidylcholine). This PA, denoted C(16)-βAH, contains a dipeptide headgroup corresponding to the bioactive molecule L-carnosine. It is found to self-assemble into nanotapes based on stacked layers of molecules. Bilayers are found to coexist with monolayers in which the PA molecules pack with alternating up-down arrangement so that the headgroups decorate both surfaces. The bilayers become dehydrated as PA concentration increases and the number of layers in the stack decreases to produce ultrathin nanotapes comprised of 2-3 bilayers. Addition of the PA to DPPC multilamellar vesicles leads to a transition to well-defined unilamellar vesicles. The unique ability to modulate the stacking of this PA as a function of concentration, combined with its ability to induce a multilamellar to unilamellar thinning of DPPC vesicles, may be useful in biomaterials applications where the presentation of the peptide function at the surface of self-assembled nanostructures is crucial.

Effect of a PEGylated lipid on the dispersion stability and dynamic surface tension of aqueous DPPC and on the interactions with albumin

Dispersions of dipalmitoylphosphatidylcholine (DPPC) vesicles at 0.1 wt % (1000 ppm) in aqueous isotonic buffer solutions produced by extensive sonication were found to be colloidally stable for hours and days. They also had very low (<10 mN/m) dynamic surface tension minima (DSTM) under pulsating area conditions at 37 degrees C at 20 rpm area pulsation rate. When a 1000 ppm DPPC dispersion was mixed with a stable solution of 1000 ppm bovine serum albumin (BSA), it became colloidally unstable, aggregating within minutes, implying that heterocoagulation between lipid vesicles and albumin takes place. The heterocoagulated dispersion produced high DSTM because the lipid transport rate to the interface became slower. Moreover, the protein may have been transported to the surface faster and adsorbed more than the lipid at the surface. DPPC lipid vesicles were modified for reducing aggregation with other vesicles or with the protein with the addition of a small weight fraction of a neutral "PEGylated" lipid, with a covalently bonded poly(ethylene glycol) (PEG) group. The mixed vesicles were found to be quite more stable than the DPPC vesicles, remaining stable for months, apparently stabilized by steric forces. The colloidal stability at the initial stages of coagulation was evaluated quantitatively from the Fuchs-Smoluchowski stability ratio W. When the modified lipid vesicle dispersion was mixed with the albumin, the vesicles showed no tendency to aggregate with the albumin molecules for days, also probably because of steric repulsion between the PEGylated lipid and the protein. Finally, the mixed lipid dispersions maintained their low DSTM as did the DPPC vesicles without the albumin, and also in the presence of albumin. The results have implications on the use of DPPC or DPPC-based lipids in treating alveolar respiratory diseases without albumin inhibition of their surface tension lowering ability.

Effect of buffer composition and preparation protocol on the dispersion stability and interfacial behavior of aqueous DPPC dispersions

The effect of the buffer composition and the preparation protocol on the dynamic surface tension (DST) and vesicle sizes of aqueous dipalmitoylphosphatidylcholine (DPPC) dispersions was studied. Four isotonic buffers were used in preparing DPPC dispersions at physiological conditions for possible biological applications: (1) a standard PBS solution; (2) the above PBS with 1mM CaCl(2); (3) PBS with one tenth the previous standard phosphate salt concentrations and 2.5 mM CaCl(2); and (4) 150 mM NaCl with 2.5 mM CaCl(2) and 10mM HEPES (4-(2-hydroxyethyl)-1-piperazineethanesulfonic acid). Two protocols, with a new method and an old method (Bangham method), were used in preparing the DPPC dispersions. The DPPC dispersions prepared with the new method contained mostly vesicles and were quite stable at 25 or 37 degrees C. Dynamic light scattering (DLS) and spectroturbidimetry (ST) results showed that the DPPC vesicle sizes in buffer (4) were much smaller than those in the other buffers. When the DPPC dispersions were prepared with the new method, the diameter of the DPPC particles was smaller than those with the old method. The DPPC vesicles with the new method were more stable than those with the other method. The DPPC dispersions of 1000 ppm at 37 degrees C with the new method produced, at pulsating area conditions at 20 cycles per minute, low tension minima (gamma(min)), lower than 10 mN/m, in buffers (1), (2), and (4). With buffer (4) the DSTs were lower and were achieved faster than with the other buffers. A minimum concentration of 1000 or 250 ppm DPPC was needed to produce DSTs lower than 10 mN/m within 10 min or less, with buffer (2) or (4), respectively. IRRAS results suggest that DPPC in buffer (2) or (4) forms a close-packed monolayer at the interface. These results have implications for designing efficient protocols of lipid dispersion preparation and lung surfactant replacement formulations in treating respiratory disease.

Comparison of liposomes formed by sonication and extrusion: rotational and translational diffusion of an embedded chromophore

We report on the physical and optical characterization of liposomes formed by extrusion and sonication, two widely used methods for vesicle preparation. We also address the issue of whether the properties of bilayers formed from liposomes prepared by the two techniques differ at the molecular and mesoscopic levels. We used the phospholipid 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC), with and without cholesterol, to form liposomes, incorporating 1-oleoyl-2-[12-[(7-nitro-2-1,3-benzoxadiazol-4-yl)amino]dodecanoyl]-sn-glycero-3-phosphocholine (18:1-12:0 NBD-PC) as an optical probe of dynamics. We measured the physical morphology of liposomes by transmission electron microscopy (TEM) and dynamic light scattering (DLS), and the rotational and translational diffusion of 18:1-12:0 NBD-PC by time correlated single photon counting (TCSPC) and fluorescence recovery after pattern photobleaching (FRAPP), respectively. We find that, despite apparent differences in average size and size distribution, both methods of preparation produced liposomes that exhibit the same molecular scale environment. The translational diffusion behavior of the tethered chromophore in planar bilayer lipid membranes formed from the two types of liposomes also yielded similar results.